ARM: iop32x: remove the platform

This was marked as unused in 5.19 and can now be removed

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 333 deletions

diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
deleted file mode 100644
index 8b4c29d17265..000000000000
--- a/arch/arm/mach-iop32x/iq31244.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq31244.c
- *
- * Board support code for the Intel EP80219 and IQ31244 platforms.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
- * same machine id, and the processor type was used to select board type.
- * However this assumption breaks for an iq80219 board which is an iop219
- * processor on an iq31244 board.  The force_ep80219 flag has been added
- * for old boot loaders using the iq31244 machine id for an ep80219 platform.
- */
-static int force_ep80219;
-
-static int is_80219(void)
-{
-	return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
-}
-
-static int is_ep80219(void)
-{
-	if (machine_is_ep80219() || force_ep80219)
-		return 1;
-	else
-		return 0;
-}
-
-
-/*
- * EP80219/IQ31244 timer tick configuration.
- */
-static void __init iq31244_timer_init(void)
-{
-	if (is_ep80219()) {
-		/* 33.333 MHz crystal.  */
-		iop_init_time(200000000);
-	} else {
-		/* 33.000 MHz crystal.  */
-		iop_init_time(198000000);
-	}
-}
-
-
-/*
- * IQ31244 I/O.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init iq31244_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
-
-
-/*
- * EP80219/IQ31244 PCI.
- */
-static int __init
-ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* 82551 Pro 100 */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else {
-		printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci ep80219_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= ep80219_pci_map_irq,
-};
-
-static int __init
-iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* 82546 GigE */
-		irq = IRQ_IOP32X_XINT0;
-	} else {
-		printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq31244_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= iq31244_pci_map_irq,
-};
-
-static int __init iq31244_pci_init(void)
-{
-	if (is_ep80219())
-		pci_common_init(&ep80219_pci);
-	else if (machine_is_iq31244()) {
-		if (is_80219()) {
-			printk("note: iq31244 board type has been selected\n");
-			printk("note: to select ep80219 operation:\n");
-			printk("\t1/ specify \"force_ep80219\" on the kernel"
-				" command line\n");
-			printk("\t2/ update boot loader to pass"
-				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
-		}
-		pci_common_init(&iq31244_pci);
-	}
-
-	return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-/*
- * IQ31244 machine initialisation.
- */
-static struct physmap_flash_data iq31244_flash_data = {
-	.width		= 2,
-};
-
-static struct resource iq31244_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq31244_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_flash_resource,
-};
-
-static struct plat_serial8250_port iq31244_serial_port[] = {
-	{
-		.mapbase	= IQ31244_UART,
-		.membase	= (char *)IQ31244_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource iq31244_uart_resource = {
-	.start		= IQ31244_UART,
-	.end		= IQ31244_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iq31244_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_uart_resource,
-};
-
-/*
- * This function will send a SHUTDOWN_COMPLETE message to the PIC
- * controller over I2C.  We are not using the i2c subsystem since
- * we are going to power off and it may be removed
- */
-void ep80219_power_off(void)
-{
-	/*
-	 * Send the Address byte w/ the start condition
-	 */
-	*IOP3XX_IDBR1 = 0x60;
-	*IOP3XX_ICR1 = 0xE9;
-	mdelay(1);
-
-	/*
-	 * Send the START_MSG byte w/ no start or stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x0F;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
-	 * stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x03;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send an ignored byte w/ stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x00;
-	*IOP3XX_ICR1 = 0xEA;
-
-	while (1)
-		;
-}
-
-static void __init iq31244_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iq31244_flash_device);
-	platform_device_register(&iq31244_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	if (is_ep80219())
-		pm_power_off = ep80219_power_off;
-
-	if (!is_80219())
-		platform_device_register(&iop3xx_aau_channel);
-}
-
-static int __init force_ep80219_setup(char *str)
-{
-	force_ep80219 = 1;
-	return 1;
-}
-
-__setup("force_ep80219", force_ep80219_setup);
-
-MACHINE_START(IQ31244, "Intel IQ31244")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq31244_timer_init,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
-
-/* There should have been an ep80219 machine identifier from the beginning.
- * Boot roms older than March 2007 do not know the ep80219 machine id.  Pass
- * "force_ep80219" on the kernel command line, otherwise iq31244 operation
- * will be selected.
- */
-MACHINE_START(EP80219, "Intel EP80219")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq31244_timer_init,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END