ARM: remove Intel iop33x and iop13xx support

There are three families of IOP machines we support in Linux: iop32x
(which includes EP80219), iop33x and iop13xx (aka IOP34x aka WP8134x).

All products we support in the kernel are based on the first of these,
iop32x, the other families only ever supported the Intel reference
boards but no actual machine anyone could ever buy.

While one could clearly make them all three work in a single kernel
with some work, this takes the easy way out, removing the later two
platforms entirely, under the assumption that there are no remaining
users.

Earlier versions of OpenWRT and Debian both had support for iop32x
but not the others, and they both dropped iop32x as well in their 2015
releases.

Link: https://lore.kernel.org/r/20190809163334.489360-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C parts
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 148 deletions

diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
deleted file mode 100644
index ab74fbabc749..000000000000
--- a/arch/arm/mach-iop33x/iq80331.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop33x/iq80331.c
- *
- * Board support code for the Intel IQ80331 platform.
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <mach/time.h>
-
-/*
- * IQ80331 timer tick configuration.
- */
-static void __init iq80331_timer_init(void)
-{
-	/* D-Step parts run at a higher internal bus frequency */
-	if (*IOP3XX_ATURID >= 0xa)
-		iop_init_time(333000000);
-	else
-		iop_init_time(266000000);
-}
-
-
-/*
- * IQ80331 PCI.
- */
-static int __init
-iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 1 && pin == 1) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP33X_XINT1;
-	} else if (slot == 1 && pin == 2) {
-		/* PCI-X Slot INTB */
-		irq = IRQ_IOP33X_XINT2;
-	} else if (slot == 1 && pin == 3) {
-		/* PCI-X Slot INTC */
-		irq = IRQ_IOP33X_XINT3;
-	} else if (slot == 1 && pin == 4) {
-		/* PCI-X Slot INTD */
-		irq = IRQ_IOP33X_XINT0;
-	} else if (slot == 2) {
-		/* GigE */
-		irq = IRQ_IOP33X_XINT2;
-	} else {
-		printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq80331_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit_cond,
-	.map_irq	= iq80331_pci_map_irq,
-};
-
-static int __init iq80331_pci_init(void)
-{
-	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
-		machine_is_iq80331())
-		pci_common_init(&iq80331_pci);
-
-	return 0;
-}
-
-subsys_initcall(iq80331_pci_init);
-
-
-/*
- * IQ80331 machine initialisation.
- */
-static struct physmap_flash_data iq80331_flash_data = {
-	.width		= 1,
-};
-
-static struct resource iq80331_flash_resource = {
-	.start		= 0xc0000000,
-	.end		= 0xc07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80331_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq80331_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80331_flash_resource,
-};
-
-static struct resource iq80331_gpio_res[] = {
-	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
-};
-
-static void __init iq80331_init_machine(void)
-{
-	platform_device_register_simple("gpio-iop", 0,
-					iq80331_gpio_res,
-					ARRAY_SIZE(iq80331_gpio_res));
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iop33x_uart0_device);
-	platform_device_register(&iop33x_uart1_device);
-	platform_device_register(&iq80331_flash_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-	platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80331, "Intel IQ80331")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iop3xx_map_io,
-	.init_irq	= iop33x_init_irq,
-	.init_time	= iq80331_timer_init,
-	.init_machine	= iq80331_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END