diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 10:33:08 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 10:33:08 -0700 |
commit | e731f3146ff3bba5424b40140e1a7e6f92e94964 (patch) | |
tree | c926040385de8b020763f0d2338e0ccbf42bac45 /arch/arm/mach-s3c/mach-nexcoder.c | |
parent | 1f70935f637dfba226bf77182c2629fde61ed06e (diff) | |
parent | accdab6d9e8f715068d91ee0ca0424a6999f0d19 (diff) |
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
Diffstat (limited to 'arch/arm/mach-s3c/mach-nexcoder.c')
-rw-r--r-- | arch/arm/mach-s3c/mach-nexcoder.c | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c new file mode 100644 index 000000000000..2a454c919658 --- /dev/null +++ b/arch/arm/mach-s3c/mach-nexcoder.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 +// linux/arch/arm/mach-s3c2440/mach-nexcoder.c +// +// Copyright (c) 2004 Nex Vision +// Guillaume GOURAT <guillaume.gourat@nexvision.tv> +// +// Modifications: +// 15-10-2004 GG Created initial version +// 12-03-2005 BJD Updated for release + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/string.h> +#include <linux/serial_core.h> +#include <linux/serial_s3c.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <linux/mtd/map.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +//#include <asm/debug-ll.h> +#include "regs-gpio.h" +#include "gpio-samsung.h" +#include <linux/platform_data/i2c-s3c2410.h> + +#include "gpio-cfg.h" +#include "devs.h" +#include "cpu.h" + +#include "s3c24xx.h" + +static struct map_desc nexcoder_iodesc[] __initdata = { + /* nothing here yet */ +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + +/* NOR Flash on NexVision NexCoder 2440 board */ + +static struct resource nexcoder_nor_resource[] = { + [0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M), +}; + +static struct map_info nexcoder_nor_map = { + .bankwidth = 2, +}; + +static struct platform_device nexcoder_device_nor = { + .name = "mtd-flash", + .id = -1, + .num_resources = ARRAY_SIZE(nexcoder_nor_resource), + .resource = nexcoder_nor_resource, + .dev = + { + .platform_data = &nexcoder_nor_map, + } +}; + +/* Standard Nexcoder devices */ + +static struct platform_device *nexcoder_devices[] __initdata = { + &s3c_device_ohci, + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_rtc, + &s3c_device_camif, + &s3c_device_spi0, + &s3c_device_spi1, + &nexcoder_device_nor, +}; + +static void __init nexcoder_sensorboard_init(void) +{ + /* Initialize SCCB bus */ + gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPE(14)); /* IICSCL */ + gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPE(15)); /* IICSDA */ + + /* Power up the sensor board */ + gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL); + gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */ + gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL); + gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */ +} + +static void __init nexcoder_map_io(void) +{ + s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); + s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); + s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); + + nexcoder_sensorboard_init(); +} + +static void __init nexcoder_init_time(void) +{ + s3c2440_init_clocks(12000000); + s3c24xx_timer_init(); +} + +static void __init nexcoder_init(void) +{ + s3c_i2c0_set_platdata(NULL); + + /* Configure the I2S pins (GPE0...GPE4) in correct mode */ + s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); + + platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices)); +}; + +MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") + /* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */ + .atag_offset = 0x100, + .map_io = nexcoder_map_io, + .init_machine = nexcoder_init, + .init_irq = s3c2440_init_irq, + .init_time = nexcoder_init_time, +MACHINE_END |