Merge branch 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers into asm-generic

Patches from David Howells <dhowells@redhat.com>:

This is to complete part of the UAPI disintegration for which the
preparatory patches were pulled recently.

Note that there are some fixup patches which are at the base of the
branch aimed at you, plus all arches get the asm-generic branch merged in too.

* 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/asm-generic
  UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k)
  c6x: remove c6x signal.h
  UAPI: Split compound conditionals containing __KERNEL__ in Arm64
  UAPI: Fix the guards on various asm/unistd.h files

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 42 insertions, 43 deletions

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a534d8880de1..416d436111f2 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -23,6 +23,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
+#include <linux/regulator/fixed.h>
 #include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
 #include <linux/mfd/abx500/ab8500-gpio.h>
@@ -48,13 +49,12 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
-#include <mach/crypto-ux500.h>
+#include <linux/platform_data/crypto-ux500.h>
 
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
-#include "board-mop500-msp.h"
 
 static struct gpio_led snowball_led_array[] = {
 	{
@@ -76,6 +76,23 @@ static struct platform_device snowball_led_dev = {
 	},
 };
 
+static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
+       .supply_name            = "EN-3V3",
+       .gpio                   = SNOWBALL_EN_3V3_ETH_GPIO,
+       .microvolts             = 3300000,
+       .enable_high            = 1,
+       .init_data              = &gpio_en_3v3_regulator,
+       .startup_delay          = 5000, /* 1200us */
+};
+
+static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
+       .name   = "reg-fixed-voltage",
+       .id     = 1,
+       .dev    = {
+               .platform_data  = &snowball_gpio_en_3v3_data,
+       },
+};
+
 static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
 	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
 	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
@@ -524,33 +541,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
-#define PRCC_K_SOFTRST_SET      0x18
-#define PRCC_K_SOFTRST_CLEAR    0x1C
-static void ux500_uart0_reset(void)
-{
-	void __iomem *prcc_rst_set, *prcc_rst_clr;
-
-	prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_SET);
-	prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_CLEAR);
-
-	/* Activate soft reset PRCC_K_SOFTRST_CLEAR */
-	writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
-	udelay(1);
-
-	/* Release soft reset PRCC_K_SOFTRST_SET */
-	writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
-	udelay(1);
-}
-
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
 	.dma_filter = stedma40_filter,
 	.dma_rx_param = &uart0_dma_cfg_rx,
 	.dma_tx_param = &uart0_dma_cfg_tx,
 #endif
-	.reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {
@@ -586,6 +582,7 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&snowball_led_dev,
 	&snowball_key_dev,
 	&snowball_sbnet_dev,
+	&snowball_gpio_en_3v3_regulator_dev,
 };
 
 static void __init mop500_init_machine(void)
@@ -608,7 +605,7 @@ static void __init mop500_init_machine(void)
 	mop500_i2c_init(parent);
 	mop500_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	u8500_cryp1_hash1_init(parent);
@@ -642,7 +639,7 @@ static void __init snowball_init_machine(void)
 	mop500_i2c_init(parent);
 	snowball_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	/* This board has full regulator constraints */
@@ -674,7 +671,7 @@ static void __init hrefv60_init_machine(void)
 	mop500_i2c_init(parent);
 	hrefv60_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
@@ -694,6 +691,7 @@ static void __init hrefv60_init_machine(void)
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
@@ -705,6 +703,7 @@ MACHINE_END
 
 MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
@@ -715,6 +714,7 @@ MACHINE_END
 
 MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.atag_offset	= 0x100,
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
@@ -726,12 +726,9 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_UX500_DT
 
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-};
-
 struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+	/* Requires call-back bindings. */
+	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA and call-back bindings. */
 	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
 	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
@@ -739,6 +736,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires DMA bindings. */
 	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	/* Requires clock name bindings. */
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
@@ -757,6 +756,15 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+	/* Requires clock name and DMA bindings. */
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+		"ux500-msp-i2s.0", &msp0_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+		"ux500-msp-i2s.1", &msp1_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+		"ux500-msp-i2s.2", &msp2_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+		"ux500-msp-i2s.3", &msp3_platform_data),
 	{},
 };
 
@@ -797,7 +805,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
-		mop500_msp_init(parent);
+		mop500_audio_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 		i2c_register_board_info(2, mop500_i2c2_devices,
@@ -806,7 +814,7 @@ static void __init u8500_init_machine(void)
 		mop500_uib_init();
 
 	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
-		mop500_msp_init(parent);
+		mop500_of_audio_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -817,16 +825,6 @@ static void __init u8500_init_machine(void)
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
-		hrefv60_sdi_init(parent);
-		mop500_msp_init(parent);
-
-		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-
-		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-		i2c_register_board_info(2, mop500_i2c2_devices,
-					ARRAY_SIZE(mop500_i2c2_devices));
-
 		mop500_uib_init();
 	}
 
@@ -844,6 +842,7 @@ static const char * u8500_dt_board_compat[] = {
 
 
 DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+	.smp		= smp_ops(ux500_smp_ops),
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */