Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...

1 files changed, 180 insertions, 0 deletions

diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
new file mode 100644
index 000000000000..eefb029197ca
--- /dev/null
+++ b/arch/arm/mach-vexpress/spc.c
@@ -0,0 +1,180 @@
+/*
+ * Versatile Express Serial Power Controller (SPC) support
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * Authors: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ *          Achin Gupta           <achin.gupta@arm.com>
+ *          Lorenzo Pieralisi     <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+
+#define SPCLOG "vexpress-spc: "
+
+/* SPC wake-up IRQs status and mask */
+#define WAKE_INT_MASK		0x24
+#define WAKE_INT_RAW		0x28
+#define WAKE_INT_STAT		0x2c
+/* SPC power down registers */
+#define A15_PWRDN_EN		0x30
+#define A7_PWRDN_EN		0x34
+/* SPC per-CPU mailboxes */
+#define A15_BX_ADDR0		0x68
+#define A7_BX_ADDR0		0x78
+
+/* wake-up interrupt masks */
+#define GBL_WAKEUP_INT_MSK	(0x3 << 10)
+
+/* TC2 static dual-cluster configuration */
+#define MAX_CLUSTERS		2
+
+struct ve_spc_drvdata {
+	void __iomem *baseaddr;
+	/*
+	 * A15s cluster identifier
+	 * It corresponds to A15 processors MPIDR[15:8] bitfield
+	 */
+	u32 a15_clusid;
+};
+
+static struct ve_spc_drvdata *info;
+
+static inline bool cluster_is_a15(u32 cluster)
+{
+	return cluster == info->a15_clusid;
+}
+
+/**
+ * ve_spc_global_wakeup_irq()
+ *
+ * Function to set/clear global wakeup IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @set: if true, global wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_global_wakeup_irq(bool set)
+{
+	u32 reg;
+
+	reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+	if (set)
+		reg |= GBL_WAKEUP_INT_MSK;
+	else
+		reg &= ~GBL_WAKEUP_INT_MSK;
+
+	writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_cpu_wakeup_irq()
+ *
+ * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @set: if true, wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set)
+{
+	u32 mask, reg;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	mask = 1 << cpu;
+
+	if (!cluster_is_a15(cluster))
+		mask <<= 4;
+
+	reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+	if (set)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_set_resume_addr() - set the jump address used for warm boot
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @addr: physical resume address
+ */
+void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr)
+{
+	void __iomem *baseaddr;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	if (cluster_is_a15(cluster))
+		baseaddr = info->baseaddr + A15_BX_ADDR0 + (cpu << 2);
+	else
+		baseaddr = info->baseaddr + A7_BX_ADDR0 + (cpu << 2);
+
+	writel_relaxed(addr, baseaddr);
+}
+
+/**
+ * ve_spc_powerdown()
+ *
+ * Function to enable/disable cluster powerdown. Not protected by locking
+ * since it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @enable: if true enables powerdown, if false disables it
+ */
+void ve_spc_powerdown(u32 cluster, bool enable)
+{
+	u32 pwdrn_reg;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	pwdrn_reg = cluster_is_a15(cluster) ? A15_PWRDN_EN : A7_PWRDN_EN;
+	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
+}
+
+int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
+{
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		pr_err(SPCLOG "unable to allocate mem\n");
+		return -ENOMEM;
+	}
+
+	info->baseaddr = baseaddr;
+	info->a15_clusid = a15_clusid;
+
+	/*
+	 * Multi-cluster systems may need this data when non-coherent, during
+	 * cluster power-up/power-down. Make sure driver info reaches main
+	 * memory.
+	 */
+	sync_cache_w(info);
+	sync_cache_w(&info);
+
+	return 0;
+}