summaryrefslogtreecommitdiff
path: root/arch/arm/mm/cache-l2x0.c
diff options
context:
space:
mode:
authorChristian Daudt <csd@broadcom.com>2013-05-09 22:21:01 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2013-05-15 19:39:27 +0100
commit3b656fed6ff65d6d268da9ed0760c2a58d125771 (patch)
tree17ec053049fedb78e072fbafd055e8ba712422b2 /arch/arm/mm/cache-l2x0.c
parentfaefd550c45d8d314e8f260f21565320355c947f (diff)
ARM: 7716/1: bcm281xx: Add L2 support for Rev A2 chips
Rev A2 SoCs have an unorthodox memory re-mapping and this needs to be reflected in the cache operations. This patch adds new outer cache functions for the l2x0 driver to support this SoC revision. It also adds a new compatible value for the cache to enable this functionality. Updates from V1: - remove section 1 altogether and note that in comments - simplify section selection caused by section 1 removal - BUG_ON just in case section 1 shows up Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mm/cache-l2x0.c')
-rw-r--r--arch/arm/mm/cache-l2x0.c158
1 files changed, 158 insertions, 0 deletions
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index c465faca51b0..d70e0aba0c9d 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -523,6 +523,147 @@ static void aurora_flush_range(unsigned long start, unsigned long end)
}
}
+/*
+ * For certain Broadcom SoCs, depending on the address range, different offsets
+ * need to be added to the address before passing it to L2 for
+ * invalidation/clean/flush
+ *
+ * Section Address Range Offset EMI
+ * 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC
+ * 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS
+ * 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC
+ *
+ * When the start and end addresses have crossed two different sections, we
+ * need to break the L2 operation into two, each within its own section.
+ * For example, if we need to invalidate addresses starts at 0xBFFF0000 and
+ * ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2)
+ * 0xC0000000 - 0xC0001000
+ *
+ * Note 1:
+ * By breaking a single L2 operation into two, we may potentially suffer some
+ * performance hit, but keep in mind the cross section case is very rare
+ *
+ * Note 2:
+ * We do not need to handle the case when the start address is in
+ * Section 1 and the end address is in Section 3, since it is not a valid use
+ * case
+ *
+ * Note 3:
+ * Section 1 in practical terms can no longer be used on rev A2. Because of
+ * that the code does not need to handle section 1 at all.
+ *
+ */
+#define BCM_SYS_EMI_START_ADDR 0x40000000UL
+#define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL
+
+#define BCM_SYS_EMI_OFFSET 0x40000000UL
+#define BCM_VC_EMI_OFFSET 0x80000000UL
+
+static inline int bcm_addr_is_sys_emi(unsigned long addr)
+{
+ return (addr >= BCM_SYS_EMI_START_ADDR) &&
+ (addr < BCM_VC_EMI_SEC3_START_ADDR);
+}
+
+static inline unsigned long bcm_l2_phys_addr(unsigned long addr)
+{
+ if (bcm_addr_is_sys_emi(addr))
+ return addr + BCM_SYS_EMI_OFFSET;
+ else
+ return addr + BCM_VC_EMI_OFFSET;
+}
+
+static void bcm_inv_range(unsigned long start, unsigned long end)
+{
+ unsigned long new_start, new_end;
+
+ BUG_ON(start < BCM_SYS_EMI_START_ADDR);
+
+ if (unlikely(end <= start))
+ return;
+
+ new_start = bcm_l2_phys_addr(start);
+ new_end = bcm_l2_phys_addr(end);
+
+ /* normal case, no cross section between start and end */
+ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
+ l2x0_inv_range(new_start, new_end);
+ return;
+ }
+
+ /* They cross sections, so it can only be a cross from section
+ * 2 to section 3
+ */
+ l2x0_inv_range(new_start,
+ bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
+ l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+ new_end);
+}
+
+static void bcm_clean_range(unsigned long start, unsigned long end)
+{
+ unsigned long new_start, new_end;
+
+ BUG_ON(start < BCM_SYS_EMI_START_ADDR);
+
+ if (unlikely(end <= start))
+ return;
+
+ if ((end - start) >= l2x0_size) {
+ l2x0_clean_all();
+ return;
+ }
+
+ new_start = bcm_l2_phys_addr(start);
+ new_end = bcm_l2_phys_addr(end);
+
+ /* normal case, no cross section between start and end */
+ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
+ l2x0_clean_range(new_start, new_end);
+ return;
+ }
+
+ /* They cross sections, so it can only be a cross from section
+ * 2 to section 3
+ */
+ l2x0_clean_range(new_start,
+ bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
+ l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+ new_end);
+}
+
+static void bcm_flush_range(unsigned long start, unsigned long end)
+{
+ unsigned long new_start, new_end;
+
+ BUG_ON(start < BCM_SYS_EMI_START_ADDR);
+
+ if (unlikely(end <= start))
+ return;
+
+ if ((end - start) >= l2x0_size) {
+ l2x0_flush_all();
+ return;
+ }
+
+ new_start = bcm_l2_phys_addr(start);
+ new_end = bcm_l2_phys_addr(end);
+
+ /* normal case, no cross section between start and end */
+ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
+ l2x0_flush_range(new_start, new_end);
+ return;
+ }
+
+ /* They cross sections, so it can only be a cross from section
+ * 2 to section 3
+ */
+ l2x0_flush_range(new_start,
+ bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
+ l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+ new_end);
+}
+
static void __init l2x0_of_setup(const struct device_node *np,
u32 *aux_val, u32 *aux_mask)
{
@@ -765,6 +906,21 @@ static const struct l2x0_of_data aurora_no_outer_data = {
},
};
+static const struct l2x0_of_data bcm_l2x0_data = {
+ .setup = pl310_of_setup,
+ .save = pl310_save,
+ .outer_cache = {
+ .resume = pl310_resume,
+ .inv_range = bcm_inv_range,
+ .clean_range = bcm_clean_range,
+ .flush_range = bcm_flush_range,
+ .sync = l2x0_cache_sync,
+ .flush_all = l2x0_flush_all,
+ .inv_all = l2x0_inv_all,
+ .disable = l2x0_disable,
+ },
+};
+
static const struct of_device_id l2x0_ids[] __initconst = {
{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
@@ -773,6 +929,8 @@ static const struct of_device_id l2x0_ids[] __initconst = {
.data = (void *)&aurora_no_outer_data},
{ .compatible = "marvell,aurora-outer-cache",
.data = (void *)&aurora_with_outer_data},
+ { .compatible = "bcm,bcm11351-a2-pl310-cache",
+ .data = (void *)&bcm_l2x0_data},
{}
};