ARM: 8611/1: l2x0: add PMU support

The L2C-220 (AKA L220) and L2C-310 (AKA PL310) cache controllers feature
a Performance Monitoring Unit (PMU), which can be useful for tuning
and/or debugging. This hardware is always present and the relevant
registers are accessible to non-secure accesses. Thus, no special
firmware interface is necessary.

This patch adds support for the PMU, plugging into the usual perf
infrastructure. The overflow interrupt is not always available (e.g. on
RealView PBX A9 it is not wired up at all), and the hardware counters
saturate, so the driver does not make use of this. Instead, the driver
periodically polls and reset counters as required to avoid losing
events due to saturation.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 6 insertions, 0 deletions

diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index ca5595fa072a..d1870c777c6e 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -142,6 +142,8 @@ static void l2c_disable(void)
 {
 	void __iomem *base = l2x0_base;
 
+	l2x0_pmu_suspend();
+
 	outer_cache.flush_all();
 	l2c_write_sec(0, base, L2X0_CTRL);
 	dsb(st);
@@ -159,6 +161,8 @@ static void l2c_resume(void)
 	/* Do not touch the controller if already enabled. */
 	if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN))
 		l2c_enable(base, l2x0_data->num_lock);
+
+	l2x0_pmu_resume();
 }
 
 /*
@@ -891,6 +895,8 @@ static int __init __l2c_init(const struct l2c_init_data *data,
 	pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
 		data->type, cache_id, aux);
 
+	l2x0_pmu_register(l2x0_base, cache_id);
+
 	return 0;
 }