Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits)
  [ARM] Update mach-types
  ARM: 5636/1: Move vendor enum to AMBA include
  ARM: Fix pfn_valid() for sparse memory
  [ARM] orion5x: Add LaCie NAS 2Big Network support
  [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume
  ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board
  ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board
  ARM: 5689/1: Update default config of HP Jornada 700-series machines
  ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem
  ARM: 5688/1: ks8695_serial: disable_irq() lockup
  ARM: 5687/1: fix an oops with highmem
  ARM: 5684/1: Add nuc960 platform to w90x900
  ARM: 5683/1: Add nuc950 platform to w90x900
  ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform
  ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver
  ARM: 5625/1: fix hard coded 4K resource size in amba bus detection
  MMC: MMCI: convert realview MMC to use gpiolib
  ARM: 5685/1: Make MMCI driver compile without gpiolib
  ARM: implement highpte
  ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ
  ...

Fix up trivial conflict in arch/arm/kernel/signal.c.

It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83f ("KEYS:
Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.

1 files changed, 11 insertions, 28 deletions

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 88fb3a57e029..844567ee35fe 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35 */
+/* MX31, MX35, MX25, MXC91231 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
@@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void)
 {
 	unsigned int tmp;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(0, timer_base + MX3_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(1<<0, timer_base + MX3_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -90,7 +90,7 @@ static void gpt_irq_acknowledge(void)
 		__raw_writel(0, timer_base + MX1_2_TSTAT);
 	if (cpu_is_mx2())
 		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clocksource_mxc.read = mx3_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		if (cpu_is_mx3())
+		if (cpu_is_mx3() || cpu_is_mx25())
 			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
 					timer_base + MX3_TCMP);
 		else
@@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tstat = __raw_readl(timer_base + MX3_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clockevent_mxc.set_next_event = mx3_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -281,30 +281,13 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxc_timer_init(struct clk *timer_clk)
+void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
-	int irq;
 
 	clk_enable(timer_clk);
 
-	if (cpu_is_mx1()) {
-#ifdef CONFIG_ARCH_MX1
-		timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
-		irq = TIM1_INT;
-#endif
-	} else if (cpu_is_mx2()) {
-#ifdef CONFIG_ARCH_MX2
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT1;
-#endif
-	} else if (cpu_is_mx3()) {
-#ifdef CONFIG_ARCH_MX3
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT;
-#endif
-	} else
-		BUG();
+	timer_base = base;
 
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
@@ -313,7 +296,7 @@ void __init mxc_timer_init(struct clk *timer_clk)
 	__raw_writel(0, timer_base + MXC_TCTL);
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;