Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...

1 files changed, 0 insertions, 79 deletions

diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
deleted file mode 100644
index c42f39f20195..000000000000
--- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef __ASM_ARCH_PXA3XX_NAND_H
-#define __ASM_ARCH_PXA3XX_NAND_H
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct pxa3xx_nand_timing {
-	unsigned int	tCH;  /* Enable signal hold time */
-	unsigned int	tCS;  /* Enable signal setup time */
-	unsigned int	tWH;  /* ND_nWE high duration */
-	unsigned int	tWP;  /* ND_nWE pulse time */
-	unsigned int	tRH;  /* ND_nRE high duration */
-	unsigned int	tRP;  /* ND_nRE pulse width */
-	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
-	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
-	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
-	uint16_t	read1;
-	uint16_t	read2;
-	uint16_t	program;
-	uint16_t	read_status;
-	uint16_t	read_id;
-	uint16_t	erase;
-	uint16_t	reset;
-	uint16_t	lock;
-	uint16_t	unlock;
-	uint16_t	lock_status;
-};
-
-struct pxa3xx_nand_flash {
-	char		*name;
-	uint32_t	chip_id;
-	unsigned int	page_per_block; /* Pages per block (PG_PER_BLK) */
-	unsigned int	page_size;	/* Page size in bytes (PAGE_SZ) */
-	unsigned int	flash_width;	/* Width of Flash memory (DWIDTH_M) */
-	unsigned int	dfc_width;	/* Width of flash controller(DWIDTH_C) */
-	unsigned int	num_blocks;	/* Number of physical blocks in Flash */
-
-	struct pxa3xx_nand_timing *timing;	/* NAND Flash timing */
-};
-
-/*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
- */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT		(2)
-struct pxa3xx_nand_platform_data {
-
-	/* the data flash bus is shared between the Static Memory
-	 * Controller and the Data Flash Controller,  the arbiter
-	 * controls the ownership of the bus
-	 */
-	int	enable_arbiter;
-
-	/* allow platform code to keep OBM/bootloader defined NFC config */
-	int	keep_config;
-
-	/* indicate how many chip selects will be used */
-	int	num_cs;
-
-	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
-	unsigned int				nr_parts[NUM_CHIP_SELECT];
-
-	const struct pxa3xx_nand_flash * 	flash;
-	size_t					num_flash;
-};
-
-extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
-#endif /* __ASM_ARCH_PXA3XX_NAND_H */