Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - Expose tag address bits in siginfo. The original arm64 ABI did not
   expose any of the bits 63:56 of a tagged address in siginfo. In the
   presence of user ASAN or MTE, this information may be useful. The
   implementation is generic to other architectures supporting tags
   (like SPARC ADI, subject to wiring up the arch code). The user will
   have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
   bits, if available, become visible in si_addr.

 - Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
   lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
   detriment of other platforms. With these changes, the kernel scans
   the Device Tree dma-ranges and the ACPI IORT information before
   deciding on a smaller ZONE_DMA.

 - Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
   with LTO, there is an increased risk of the compiler converting an
   address dependency headed by a READ_ONCE() invocation into a control
   dependency and consequently allowing for harmful reordering by the
   CPU.

 - Add CPPC FFH support using arm64 AMU counters.

 - set_fs() removal on arm64. This renders the User Access Override
   (UAO) ARMv8 feature unnecessary.

 - Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
   identifier file for SMMUv3, stop event counters support for i.MX8MP,
   enable the perf events-based hard lockup detector.

 - Reorganise the kernel VA space slightly so that 52-bit VA
   configurations can use more virtual address space.

 - Improve the robustness of the arm64 memory offline event notifier.

 - Pad the Image header to 64K following the EFI header definition
   updated recently to increase the section alignment to 64K.

 - Support CONFIG_CMDLINE_EXTEND on arm64.

 - Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
   bits for PtrAuth.

 - Switch to vmapped shadow call stacks.

 - Miscellaneous clean-ups.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
  perf/imx_ddr: Add system PMU identifier for userspace
  bindings: perf: imx-ddr: add compatible string
  arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
  arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
  arm64: mark __system_matches_cap as __maybe_unused
  arm64: uaccess: remove vestigal UAO support
  arm64: uaccess: remove redundant PAN toggling
  arm64: uaccess: remove addr_limit_user_check()
  arm64: uaccess: remove set_fs()
  arm64: uaccess cleanup macro naming
  arm64: uaccess: split user/kernel routines
  arm64: uaccess: refactor __{get,put}_user
  arm64: uaccess: simplify __copy_user_flushcache()
  arm64: uaccess: rename privileged uaccess routines
  arm64: sdei: explicitly simulate PAN/UAO entry
  arm64: sdei: move uaccess logic to arch/arm64/
  arm64: head.S: always initialize PSTATE
  arm64: head.S: cleanup SCTLR_ELx initialization
  arm64: head.S: rename el2_setup -> init_kernel_el
  arm64: add C wrappers for SET_PSTATE_*()
  ...

1 files changed, 37 insertions, 33 deletions

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index a6b5b7ef40ae..e5bcb4995268 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -171,6 +171,8 @@ config ARM64
 	select HAVE_NMI
 	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
+	select HAVE_PERF_EVENTS_NMI if ARM64_PSEUDO_NMI && HW_PERF_EVENTS
+	select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_REGS_AND_STACK_ACCESS_API
@@ -196,7 +198,6 @@ config ARM64
 	select PCI_SYSCALL if PCI
 	select POWER_RESET
 	select POWER_SUPPLY
-	select SET_FS
 	select SPARSE_IRQ
 	select SWIOTLB
 	select SYSCTL_EXCEPTION_TRACE
@@ -332,16 +333,16 @@ config BROKEN_GAS_INST
 config KASAN_SHADOW_OFFSET
 	hex
 	depends on KASAN
-	default 0xdfffa00000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS
-	default 0xdfffd00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS
-	default 0xdffffe8000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS
-	default 0xdfffffd000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS
-	default 0xdffffffa00000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS
-	default 0xefff900000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS
-	default 0xefffc80000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS
-	default 0xeffffe4000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS
-	default 0xefffffc800000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS
-	default 0xeffffff900000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
+	default 0xdfff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS
+	default 0xdfffc00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS
+	default 0xdffffe0000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS
+	default 0xdfffffc000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS
+	default 0xdffffff800000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS
+	default 0xefff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS
+	default 0xefffc00000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS
+	default 0xeffffe0000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS
+	default 0xefffffc000000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS
+	default 0xeffffff800000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
 	default 0xffffffffffffffff
 
 source "arch/arm64/Kconfig.platforms"
@@ -1389,6 +1390,9 @@ config ARM64_PAN
 	 The feature is detected at runtime, and will remain as a 'nop'
 	 instruction if the cpu does not implement the feature.
 
+config AS_HAS_LDAPR
+	def_bool $(as-instr,.arch_extension rcpc)
+
 config ARM64_LSE_ATOMICS
 	bool
 	default ARM64_USE_LSE_ATOMICS
@@ -1426,27 +1430,6 @@ endmenu
 
 menu "ARMv8.2 architectural features"
 
-config ARM64_UAO
-	bool "Enable support for User Access Override (UAO)"
-	default y
-	help
-	  User Access Override (UAO; part of the ARMv8.2 Extensions)
-	  causes the 'unprivileged' variant of the load/store instructions to
-	  be overridden to be privileged.
-
-	  This option changes get_user() and friends to use the 'unprivileged'
-	  variant of the load/store instructions. This ensures that user-space
-	  really did have access to the supplied memory. When addr_limit is
-	  set to kernel memory the UAO bit will be set, allowing privileged
-	  access to kernel memory.
-
-	  Choosing this option will cause copy_to_user() et al to use user-space
-	  memory permissions.
-
-	  The feature is detected at runtime, the kernel will use the
-	  regular load/store instructions if the cpu does not implement the
-	  feature.
-
 config ARM64_PMEM
 	bool "Enable support for persistent memory"
 	select ARCH_HAS_PMEM_API
@@ -1847,15 +1830,36 @@ config CMDLINE
 	  entering them here. As a minimum, you should specify the the
 	  root device (e.g. root=/dev/nfs).
 
+choice
+	prompt "Kernel command line type" if CMDLINE != ""
+	default CMDLINE_FROM_BOOTLOADER
+	help
+	  Choose how the kernel will handle the provided default kernel
+	  command line string.
+
+config CMDLINE_FROM_BOOTLOADER
+	bool "Use bootloader kernel arguments if available"
+	help
+	  Uses the command-line options passed by the boot loader. If
+	  the boot loader doesn't provide any, the default kernel command
+	  string provided in CMDLINE will be used.
+
+config CMDLINE_EXTEND
+	bool "Extend bootloader kernel arguments"
+	help
+	  The command-line arguments provided by the boot loader will be
+	  appended to the default kernel command string.
+
 config CMDLINE_FORCE
 	bool "Always use the default kernel command string"
-	depends on CMDLINE != ""
 	help
 	  Always use the default kernel command string, even if the boot
 	  loader passes other arguments to the kernel.
 	  This is useful if you cannot or don't want to change the
 	  command-line options your boot loader passes to the kernel.
 
+endchoice
+
 config EFI_STUB
 	bool