Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "Device-tree updates for arm64 platforms. For the first time I can
  remember, this is actually larger than the corresponding branch for
  32-bit platforms overall, though that has more individual changes.

  A significant portion this time is due to added machine support:

   - Initial support for the Realtek RTD1295 SoC, along with the Zidoo
     X9S set-top-box

   - Initial support for Actions Semi S900 and the Bubblegum-96
     single-board-cёmputer.

   - Rockchips support for the rk3399-Firefly single-board-computer gets
     added, this one stands out for being relatively fast, affordable
     and well₋supported, compared to many boards that only fall into one
     or two of the above categories.

   - Mediatek gains support for the mt6797 mobile-phone SoC platform and
     corresponding evaluation board.

   - Amlogic board support gets added for the NanoPi K2 and S905x
     LibreTech CC single-board computers and the R-Box Pro set-top-box

   - Allwinner board support gets added for the OrangePi Win, Orangepi
     Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
     and the SoPine system-on-module.

   - Renesas board support for Salvator-XS and H3ULCB automotive
     development systems.

   - Socionext Uniphier board support for LD11-global and LD20-global,
     whatever those may be.

   - Broadcom adds support for the new Stingray communication processor
     in its iProc family, along with two reference boards.

  Other updates include:

   - For the hisicon platform, support for Hi3660-Hikey960 gets extended
     significantly.

   - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
     Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
  ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
  Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
  arm64: dts: mediatek: don't include missing file
  ARM64: dts: meson-gxl: Add Libre Technology CC support
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  dt-bindings: add Libre Technology vendor prefix
  arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
  arm64: dts: zte: Use - instead of @ for DT OPP entries
  arm64: dts: marvell: add gpio support for Armada 7K/8K
  arm64: dts: marvell: add pinctrl support for Armada 7K/8K
  arm64: dts: marvell: use new binding for the system controller on cp110
  arm64: dts: marvell: remove *-clock-output-names on cp110
  arm64: dts: marvell: use new bindings for xor clocks on ap806
  arm64: dts: marvell: mcbin: enable the mdio node
  arm64: dts: Add Actions Semi S900 and Bubblegum-96
  dt-bindings: Add vendor prefix for uCRobotics
  arm64: dts: marvell: add xmdio nodes for 7k/8k
  arm64: dts: marvell: add a comment on the cp110 slave node status
  arm64: dts: marvell: remove cpm crypto nodes from dts files
  arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
  ...

1 files changed, 120 insertions, 17 deletions

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 166c9ef884dc..9d00622ce845 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -43,6 +43,7 @@
  */
 
 #include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/sun50i-a64-ccu.h>
 
@@ -129,6 +130,12 @@
 		#size-cells = <1>;
 		ranges;
 
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun50i-a64-system-controller",
+				"syscon";
+			reg = <0x01c00000 0x1000>;
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun50i-a64-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -204,6 +211,28 @@
 			#phy-cells = <1>;
 		};
 
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
 		ehci1: usb@01c1b000 {
 			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
@@ -281,6 +310,21 @@
 				bias-pull-up;
 			};
 
+			rmii_pins: rmii_pins {
+				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+				       "PD18", "PD19", "PD20", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			rgmii_pins: rgmii_pins {
+				pins = "PD8", "PD9", "PD10", "PD11", "PD12",
+				       "PD13", "PD15", "PD16", "PD17", "PD18",
+				       "PD19", "PD20", "PD21", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
 			uart0_pins_a: uart0@0 {
 				pins = "PB8", "PB9";
 				function = "uart0";
@@ -295,6 +339,26 @@
 				pins = "PG8", "PG9";
 				function = "uart1";
 			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PD0", "PD1";
+				function = "uart3";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PD2", "PD3";
+				function = "uart4";
+			};
+
+			uart4_rts_cts_pins: uart4-rts-cts-pins {
+				pins = "PD4", "PD5";
+				function = "uart4";
+			};
 		};
 
 		uart0: serial@1c28000 {
@@ -303,8 +367,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 67>;
-			resets = <&ccu 46>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
@@ -314,8 +378,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 68>;
-			resets = <&ccu 47>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
 
@@ -325,8 +389,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 69>;
-			resets = <&ccu 48>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
 
@@ -336,8 +400,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 70>;
-			resets = <&ccu 49>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
 			status = "disabled";
 		};
 
@@ -347,8 +411,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 71>;
-			resets = <&ccu 50>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
 			status = "disabled";
 		};
 
@@ -356,8 +420,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 63>;
-			resets = <&ccu 42>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -367,8 +431,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 64>;
-			resets = <&ccu 43>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -378,11 +442,31 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 65>;
-			resets = <&ccu 44>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x100>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		gic: interrupt-controller@1c81000 {
@@ -417,12 +501,31 @@
 			compatible = "allwinner,sun50i-a64-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
+
+			r_rsb_pins: rsb@0 {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu 6>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu 2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };