diff options
| author | Ashish Kumar <Ashish.Kumar@nxp.com> | 2019-12-04 16:28:14 +0530 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2019-12-11 11:13:21 +0800 |
| commit | c77fae5ba09a6b46bc24ef9cea52650a3d59b807 (patch) | |
| tree | b0ff209334e559e07f5bd15c0449d9e897899b0c /arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | |
| parent | fcb1991c46a686c963cfcc172d68bc43dd715eaf (diff) | |
arm64: dts: ls1028a: Add FlexSPI support
Add fspi node property for LS1028A SoC for FlexSPI driver.
Property added for FlexSPI controller and for the connected
slave device for the LS1028ARDB and LS1028AQDS target.
RDB and QDS are having one SPI-NOR flash device, mt35xu02g
connected at CS0.
This flash device "mt35xu02g" is tested for octal read
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 5b9d4b35dd35..ca409d907b36 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -123,6 +123,21 @@ status = "okay"; }; +&fspi { + status = "okay"; + + mt35xu02g0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; /* 8 SPI Rx lines */ + spi-tx-bus-width = <1>; /* 1 SPI Tx line */ + reg = <0>; + }; +}; + &i2c0 { status = "okay"; |