diff options
| author | Ran Wang <ran.wang_1@nxp.com> | 2020-07-07 15:40:31 +0800 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2020-07-13 15:09:31 +0800 |
| commit | 1069a0bbf9d8c3c76bea0be55c79d2a15582a81f (patch) | |
| tree | 7187faa0090f9993f3d6b87e9111e285436887bd /arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | |
| parent | 6386156eb279386a94c74b624d41515a6481278d (diff) | |
arm64: dts: ls1043a: update USB nodes status to match board config
ls1043a-rdb and ls1043a-qds board’s default HW config (such as
pin mux selection) would not enable some USB controllers’
data path, which causing over-current detected on those
controllers. This will hit the case of ‘xhci driver prevent bus suspend
if a root hub port detected over-current condition’, causing system
failed to be suspended. So disable them in device tree to resolve this
issue.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index bfa9d957e536..3516af4726a5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -209,3 +209,11 @@ fsl,tdm-interface; }; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; |