diff options
| author | Ran Wang <ran.wang_1@nxp.com> | 2020-07-07 15:40:31 +0800 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2020-07-13 15:09:31 +0800 |
| commit | 1069a0bbf9d8c3c76bea0be55c79d2a15582a81f (patch) | |
| tree | 7187faa0090f9993f3d6b87e9111e285436887bd /arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | |
| parent | 6386156eb279386a94c74b624d41515a6481278d (diff) | |
arm64: dts: ls1043a: update USB nodes status to match board config
ls1043a-rdb and ls1043a-qds board’s default HW config (such as
pin mux selection) would not enable some USB controllers’
data path, which causing over-current detected on those
controllers. This will hit the case of ‘xhci driver prevent bus suspend
if a root hub port detected over-current condition’, causing system
failed to be suspended. So disable them in device tree to resolve this
issue.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index aaf79924159c..5c2e370f6316 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -758,6 +758,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; usb1: usb3@3000000 { @@ -768,6 +769,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; usb2: usb3@3100000 { @@ -778,6 +780,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; sata: sata@3200000 { |