Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM DT updates from Arnd Bergmann:
 "There are 40 branches this time, adding a lot of new hardware support,
  and cleanups. Krzysztof Kozlowski continues his treewide cleanups.

  There are a number of new SoCs, all of them as part of existing
  families, and typically added along with a reference board:

   - Renesas RZ/G2UL (R9A07G043) is the single-core version of the
     RZ/G2L general-purpose MPU.

   - Renesas RZ/V2M (R9A09G011) is a smart camera SoC

   - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
     cores and deep learning accerlation.

   - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
     and dual Wifi-6.

   - Corstone1000 is a generic platform from Arm that is used for
     designing custom SoCs, the support for now is for the Fixed Virtual
     Platform emulation for it.

   - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
     upcoming Chromebooks.

   - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
     MMU-less SoC to be added in a while

  New machines based on already supported SoCs this time are mainly for
  32-bit platforms and include:

   - Two wireless routers based on Broadcom bcm4708

   - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
     for the industrial embedded market, and on NXP LS1021A based IOT
     board.

   - Two ethernet switches based on Microchip LAN966

   - Eight Qualcomm Snapdragon based machines, including a smartwatch, a
     Chromebook board and some phones

   - Another phone based on the old ST-Ericsson Ux500 platform

   - Seven STM32MP1 based boards

   - Four single-board computers based on Rockchip RK3566/RK3568"

* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
  ARM: dts: kswitch-d10: enable networking
  ARM: dts: lan966x: add switch node
  ARM: dts: lan966x: add serdes node
  ARM: dts: lan966x: add reset switch reset node
  ARM: dts: lan966x: add MIIM nodes
  ARM: dts: lan966x: add hwmon node
  ARM: dts: lan966x: add basic Kontron KSwitch D10 support
  ARM: dts: lan966x: add flexcom I2C nodes
  ARM: dts: lan966x: add flexcom SPI nodes
  ARM: dts: lan966x: add all flexcom usart nodes
  ARM: dts: lan966x: add missing uart DMA channel
  ARM: dts: lan966x: add sgpio node
  ARM: dts: lan966x: swap dma channels for crypto node
  ARM: dts: lan966x: rename pinctrl nodes
  ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
  ARM: dts: at91: use generic node name for dataflash
  ARM: dts: turris-omnia: Add atsha204a node
  arm64: dts: mt8192: Follow binding order for SCP registers
  arm64: dts: mediatek: add mtk-snfi for mt7622
  arm64: dts: mediatek: mt8195-demo: enable uart1
  ...

1 files changed, 2 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index 023619648966..244ef8d6cc68 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -154,6 +154,7 @@
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 	fsl,clkreq-unsupported;
 	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
 	status = "okay";
 };
 
@@ -221,6 +222,7 @@
 	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
 	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {