diff options
author | Marek Vasut <marex@denx.de> | 2023-08-31 20:20:19 +0200 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2023-10-12 18:18:55 +0800 |
commit | dfd948b99846bcce72929d2312199535ed55868e (patch) | |
tree | 512c33fa004dea92d0dfbebcbb427084d1e289dd /arch/arm64/boot/dts/freescale | |
parent | b7d6532c5211034cc201cb7d0161d09c200aa1b1 (diff) |
arm64: dts: imx8mp: Switch WiFI enable signal to mmc-pwrseq-simple on i.MX8MP DHCOM SoM
The reset-gpio is connected to WL_REG_EN signal of the WiFi MAC, the
mmc-pwrseq-simple driver is better suited to operate this signal as
it is tied to the slot instead of the MAC, and it can enable the MAC
before the brcmfmac driver binds to it. Make use of the MMC power
sequencer.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm64/boot/dts/freescale')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index 1644b56c3953..df43741d04bb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -57,6 +57,11 @@ regulator-max-microvolt = <3300000>; regulator-name = "VDD_3P3V_AWO"; }; + + wlan_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; }; &A53_0 { @@ -543,6 +548,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + mmc-pwrseq = <&wlan_pwrseq>; vmmc-supply = <&buck4>; bus-width = <4>; non-removable; @@ -561,7 +567,6 @@ * connected to the SoC, but can be connected on to * SoC pin on the carrier board. */ - reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; }; |