Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Device-tree updates from Olof Johansson:
 "Besides new bindings and additional descriptions of hardware blocks
  for various SoCs and boards, the main new contents here is:

  SoCs:
   - Intel Agilex (SoCFPGA)
   - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)

  New boards:
   - Allwinner:
      + RerVision H3-DVK (H3)
      + Oceanic 5205 5inMFD (H6)
      + Beelink GS2 (H6)
      + Orange Pi 3 (H6)
   - Rockchip:
      + Orange Pi RK3399
      + Nanopi NEO4
      + Veyron-Mighty Chromebook variant
   - Amlogic:
      + SEI Robotics SEI510
   - ST Micro:
      + stm32mp157a discovery1
      + stm32mp157c discovery2
   - NXP:
      + Eckelmann ci4x10 (i.MX6DL)
      + i.MX8MM EVK (i.MX8MM)
      + ZII i.MX7 RPU2 (i.MX7)
      + ZII SPB4 (VF610)
      + Zii Ultra (i.MX8M)
      + TQ TQMa7S (i.MX7Solo)
      + TQ TQMa7D (i.MX7Dual)
      + Kobo Aura (i.MX50)
      + Menlosystems M53 (i.MX53)j
   - Nvidia:
      + Jetson Nano (Tegra T210)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
  arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
  arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
  arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
  arm64: dts: bitmain: Add GPIO support for BM1880 SoC
  ARM: dts: gemini: Indent DIR-685 partition table
  dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
  ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
  arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
  arm64: dts: msm8998: thermal: Fix number of supported sensors
  arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
  arm64: dts: exynos: Move fixed-clocks out of soc
  arm64: dts: exynos: Move pmu and timer nodes out of soc
  ARM: dts: s5pv210: Fix camera clock provider on Goni board
  ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
  ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
  ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
  ARM: dts: exynos: Move pmu and timer nodes out of soc
  arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
  arm64: dts: db820c: Add sound card support
  arm64: dts: apq8096-db820c: Add HDMI display support
  ...

1 files changed, 75 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index c9775b66629f..7dac33d4fd5c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -8,6 +8,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 
 #include "hi3670.dtsi"
 #include "hikey970-pinctrl.dtsi"
@@ -17,6 +18,8 @@
 	compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
 
 	aliases {
+		mshc1 = &dwmmc1;
+		mshc2 = &dwmmc2;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -35,6 +38,37 @@
 		/* expect bootloader to fill in this region */
 		reg = <0x0 0x0 0x0 0x0>;
 	};
+
+	sd_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sd_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/* GPIO_051_WIFI_EN */
+		gpio = <&gpio6 3 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
 };
 
 /*
@@ -354,6 +388,47 @@
 		"GPIO_231_HDMI_INT";
 };
 
+&dwmmc1 {
+	bus-width = <0x4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cap-sd-highspeed;
+	disable-wp;
+	cd-inverted;
+	cd-gpios = <&gpio25 5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pmx_func
+		     &sd_clk_cfg_func
+		     &sd_cfg_func>;
+	vmmc-supply = <&sd_3v3>;
+	vqmmc-supply = <&sd_1v8>;
+	status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+	bus-width = <0x4>;
+	non-removable;
+	broken-cd;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pmx_func
+		     &sdio_clk_cfg_func
+		     &sdio_cfg_func>;
+	/* WL_EN */
+	vmmc-supply = <&wlan_en>;
+	status = "ok";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;      /* sdio func num */
+		/* WL_IRQ, GPIO_177_WL_WAKEUP_AP */
+		interrupt-parent = <&gpio22>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
 &uart0 {
 	/* On High speed expansion header */
 	label = "HS-UART0";