diff options
author | Stephan Gerhold <stephan@gerhold.net> | 2023-05-29 14:46:58 +0200 |
---|---|---|
committer | Bjorn Andersson <andersson@kernel.org> | 2023-05-29 14:37:01 -0700 |
commit | 41e22c2ff38eaea777f1158071539e659aa7980d (patch) | |
tree | cba75067ec38286420d058ae1040ee0f1802bde3 /arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts | |
parent | eaa53a85748d58c4398c5c9acaa8d01d92adbb67 (diff) |
arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
MSM8916 is the only ARM64 Qualcomm SoC that is still using the old
&msmgpio name. Change this to &tlmm to avoid confusion.
Note that the node ordering does not change because the MSM8916 device
trees have pinctrl separated at the bottom (similar to sc7180).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-1-bec0f5fb46fb@gerhold.net
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 323590598113..12ce4dc236c6 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -25,8 +25,8 @@ flash-led-controller { compatible = "ocs,ocp8110"; - enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; - flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&camera_flash_default>; @@ -47,14 +47,14 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -67,7 +67,7 @@ compatible = "invensense,mpu6880"; reg = <0x68>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -90,10 +90,10 @@ compatible = "edt,edt-ft5506"; reg = <0x38>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; @@ -204,7 +204,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; |