diff options
| author | Dmitry Baryshkov <dmitry.baryshkov@linaro.org> | 2023-05-31 04:16:20 +0300 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2023-06-13 16:22:16 -0700 |
| commit | 8fe25ba3ffec7e8e2345d0163990b77a4092e456 (patch) | |
| tree | 7fe80ee2f25cb7cbb6123fa5b19bb9e6615e0cc1 /arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | |
| parent | 8e61d532370eb6946d97e39d270129e9442fb326 (diff) | |
arm64: dts: qcom: sdm845: rename labels for DSI nodes
Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.
To keep all display-related nodes close in the board files, change DSI
node labels from dsi_* to mdss_dsi_*.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-12-dmitry.baryshkov@linaro.org
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 66 |
1 files changed, 33 insertions, 33 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index f7fd897afe1e..9d6faeb65624 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -231,39 +231,6 @@ firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; }; -&dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - display_panel: panel@0 { - reg = <0>; - vddio-supply = <&vreg_l14a_1p8>; - vddpos-supply = <&lab>; - vddneg-supply = <&ibb>; - - backlight = <&pmi8998_wled>; - reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - - status = "disabled"; - - port { - panel_in_0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in_0>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -306,6 +273,39 @@ status = "okay"; }; +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p8>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + status = "disabled"; + + port { + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in_0>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; |