summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
diff options
context:
space:
mode:
authorCaleb Connolly <caleb.connolly@linaro.org>2023-06-29 22:00:53 +0100
committerBjorn Andersson <andersson@kernel.org>2023-07-13 22:44:27 -0700
commit2bc06b7604d214807918dea810b56e0840aa7ba3 (patch)
treeb5db193856802de3ad77ba55cfd4eff6dfe8038e /arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
parente4322bb818bbcd36b441de9880fa4ac911a5eb51 (diff)
arm64: dts: qcom: c630: add panel bridge 1p2 regulator
The VCC and VCCA supplies of the DSI<->eDP bridge are derived from vreg_l2a_1p2 and controlled by a GPIO on the PMIC. Add the regulator here so Linux can control it. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20230627-c630-uart-and-1p2-reg-v2-1-496b581935c1@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts')
-rw-r--r--arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts28
1 files changed, 28 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 21048ad4ffeb..fbe1874f6cec 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -80,6 +80,22 @@
};
};
+ sw_edp_1p2: edp-1p2-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "sw_edp_1p2";
+
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ pinctrl-0 = <&sw_edp_1p2_en>;
+ pinctrl-names = "default";
+
+ gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vreg_l2a_1p2>;
+ };
+
sn65dsi86_refclk: sn65dsi86-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -406,6 +422,8 @@
enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ vcca-supply = <&sw_edp_1p2>;
+ vcc-supply = <&sw_edp_1p2>;
vpll-supply = <&vreg_l14a_1p88>;
vccio-supply = <&vreg_l14a_1p88>;
@@ -500,6 +518,16 @@
firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn";
};
+&pm8998_gpios {
+ /* This pin is pulled down by a fixed resistor */
+ sw_edp_1p2_en: pm8998-gpio9-state {
+ pins = "gpio9";
+ function = "normal";
+ bias-disable;
+ qcom,drive-strength = <0>;
+ };
+};
+
&qup_i2c10_default {
drive-strength = <2>;
bias-disable;