Merge tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC DT updates from Arnd Bergmann:
 "There is one new SoC for each 32-bit Arm and 64-bit RISC-V, but both
  the Rockchips rv1109 and Sopgho CV1812H are just minor variations of
  already supported chips.

  The other six new SoCs are all part of existing arm64 families, but
  are somewhat more interesting:

   - Samsung ExynosAutov920 is an automotive chip, and the first one we
     support based on the Cortex-A78AE core with lockstep mode.

   - Google gs101 (Tensor G1) is the chip used in a number of Pixel
     phones, and is grouped with Samsung Exynos here since it is based
     on the same SoC design, sharing most of its IP blocks with that
     series.

   - MediaTek MT8188 is a new chip used for mid-range tablets and
     Chromebooks, using two Cortex-A78 cores where the older MT8195 had
     four of them.

   - Qualcomm SM8650 (Snapdragon 8 Gen 3) is their current top range
     phone SoC and the first supported chip based on Cortex-X4,
     Cortex-A720 and Cortex-A520.

   - Qualcomm X1E80100 (Snapdragon X Elite) in turn is the latest Laptop
     chip using the custom Oryon cores.

   - Unisoc UMS9620 (Tanggula 7 series) is a 5G phone SoC based on
     Cortex-A76 and Cortex-A55

  In terms of boards, we have

   - Five old Microsoft Lumia phones, the HTC One Mini 2, Motorola Moto
     G 4G, and Huawei Honor 5X/GR5, all based on Snapdragon SoCs.

   - Multiple Rockchips mobile gaming systems (Anbernic RG351V, Powkiddy
     RK2023, Powkiddy X55) along with the Sonoff iHost Smart Home Hub
     and a few Rockchips SBCs

   - Some ComXpress boards based on Marvell CN913x, which is the
     follow-up to Armada 7xxx/8xxx.

   - Six new industrial/embedded boards based on NXP i.MX8 and i.MX9

   - Mediatek MT8183 based Chromebooks from Lenovo, Asus and Acer.

   - Toradex Verdin AM62 Mallow carrier for TI AM62

   - Huashan Pi board based on the SophGo CV1812H RISC-V chip

   - Two boards based on Allwinner H616/H618

   - A number of reference boards for various added SoCs from Qualcomm,
     Mediatek, Google, Samsung, NXP and Spreadtrum

  As usual, there are cleanups and warning fixes across all platforms as
  well as added features for several of them"

* tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (857 commits)
  ARM: dts: usr8200: Fix phy registers
  arm64: dts: intel: minor whitespace cleanup around '='
  arm64: dts: socfpga: agilex: drop redundant status
  arm64: dts: socfpga: agilex: add unit address to soc node
  arm64: dts: socfpga: agilex: move firmware out of soc node
  arm64: dts: socfpga: agilex: move FPGA region out of soc node
  arm64: dts: socfpga: agilex: align pin-controller name with bindings
  arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties
  arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings
  arm64: dts: socfpga: stratix10: add unit address to soc node
  arm64: dts: socfpga: stratix10: move firmware out of soc node
  arm64: dts: socfpga: stratix10: move FPGA region out of soc node
  arm64: dts: socfpga: stratix10: align pincfg nodes with bindings
  arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB
  arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
  ARM: dts: socfpga: align NAND controller name with bindings
  ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
  arm64: dts: rockchip: Fix led pinctrl of lubancat 1
  arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
  arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
  ...

1 files changed, 264 insertions, 53 deletions

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 7b9ddde0b2c9..ee1ba5a8c8fc 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -285,9 +285,9 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <800>;
+				entry-latency-us = <550>;
 				exit-latency-us = <750>;
-				min-residency-us = <4090>;
+				min-residency-us = <6700>;
 				local-timer-stop;
 			};
 
@@ -296,8 +296,18 @@
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
 				entry-latency-us = <600>;
-				exit-latency-us = <1550>;
-				min-residency-us = <4791>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "goldplus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
 				local-timer-stop;
 			};
 		};
@@ -306,17 +316,17 @@
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x41000044>;
-				entry-latency-us = <1050>;
-				exit-latency-us = <2500>;
-				min-residency-us = <5309>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
 			};
 
 			CLUSTER_SLEEP_1: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <2700>;
-				exit-latency-us = <3500>;
-				min-residency-us = <13959>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
 			};
 		};
 	};
@@ -324,6 +334,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8550", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x19000>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 		};
 	};
@@ -400,7 +411,7 @@
 		CPU_PD7: power-domain-cpu7 {
 			#power-domain-cells = <0>;
 			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+			domain-idle-states = <&PRIME_CPU_SLEEP_0>;
 		};
 
 		CLUSTER_PD: power-domain-cluster {
@@ -1677,7 +1688,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8550-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0 0x01c00000 0 0x3000>,
@@ -1768,7 +1784,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0x0 0x01c08000 0x0 0x3000>,
@@ -1979,6 +1995,128 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43050a01", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			/* Speedbin needs more work on A740+, keep only lower freqs */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-680000000 {
+					opp-hz = /bits/ 64 <680000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-615000000 {
+					opp-hz = /bits/ 64 <615000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-475000000 {
+					opp-hz = /bits/ 64 <475000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-401000000 {
+					opp-hz = /bits/ 64 <401000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-348000000 {
+					opp-hz = /bits/ 64 <348000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+				};
+
+				opp-295000000 {
+					opp-hz = /bits/ 64 <295000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm8550-gpucc";
 			reg = <0 0x03d90000 0 0xa000>;
@@ -1990,6 +2128,89 @@
 			#power-domain-cells = <1>;
 		};
 
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
@@ -2040,17 +2261,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2058,6 +2275,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2086,17 +2306,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2104,18 +2319,21 @@
 			clock-names = "iface";
 			label = "RX";
 
-			qcom,din-ports = <0>;
-			qcom,dout-ports = <10>;
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
 
-			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
 
 			#address-cells = <2>;
 			#size-cells = <0>;
@@ -2131,14 +2349,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2151,17 +2364,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2169,6 +2377,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2188,16 +2399,19 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wakeup";
-			clocks = <&lpass_vamacro>;
+			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2224,9 +2438,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
 			#sound-dai-cells = <1>;
@@ -2923,8 +3134,8 @@
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq",
 					  "ss_phy_irq",
 					  "dm_hs_phy_irq",