diff options
| author | Lorenz Brun <lorenz@brun.one> | 2023-04-21 23:38:41 +0200 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2023-05-07 23:46:47 +0200 |
| commit | 03633c4ef1fb5ee119296dfe0c411656a9b5e04f (patch) | |
| tree | b3c7cfeeacb205e6570ecb89c1a730023e0d7999 /arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | |
| parent | ac9a78681b921877518763ba0e89202254349d1b (diff) | |
arm64: dts: rockchip: fix USB regulator on ROCK64
Currently the ROCK64 device tree specifies two regulators, vcc_host_5v
and vcc_host1_5v for USB VBUS on the device. Both of those are however
specified with RK_PA2 as the GPIO enabling them, causing the following
error when booting:
rockchip-pinctrl pinctrl: pin gpio0-2 already requested by vcc-host-5v-regulator; cannot claim for vcc-host1-5v-regulator
rockchip-pinctrl pinctrl: pin-2 (vcc-host1-5v-regulator) status -22
rockchip-pinctrl pinctrl: could not request pin 2 (gpio0-2) from group usb20-host-drv on device rockchip-pinctrl
reg-fixed-voltage vcc-host1-5v-regulator: Error applying setting, reverse things back
Looking at the schematic, there are in fact three USB regulators,
vcc_host_5v, vcc_host1_5v and vcc_otg_v5. But the enable signal for all
three is driven by Q2604 which is in turn driven by GPIO_A2/PA2.
Since these three regulators are not controllable separately, I removed
the second one which was causing the error and added labels for all
rails to the single regulator.
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20230421213841.3079632-1-lorenz@brun.one
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3328-rock64.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 14 |
1 files changed, 2 insertions, 12 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index f69a38f42d2d..0a27fa5271f5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -37,7 +37,8 @@ vin-supply = <&vcc_io>; }; - vcc_host_5v: vcc-host-5v-regulator { + /* Common enable line for all of the rails mentioned in the labels */ + vcc_host_5v: vcc_host1_5v: vcc_otg_5v: vcc-host-5v-regulator { compatible = "regulator-fixed"; gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -48,17 +49,6 @@ vin-supply = <&vcc_sys>; }; - vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&usb20_host_drv>; - regulator-name = "vcc_host1_5v"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; |