Merge tag 'v4.17-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts64 changes for 4.17" from Heiko Stübner:

The rk3399 gained support its Cadence displayport controller and some
minor additions like pins for 2ch i2s0 and the cif test clocks as well
as a default rate for ACLK_VIO that should be 400MHz according to the TRM.

The rk3328 got uart dmas fixed - a non-critical fix, as nobody was using
that so far.

New boards are the rk3328-based roc-rk3328-cc, the rk3368-based Lion-SOM
+ baseborad from Theobroma Systems and a standalone variant of the Sapphire
board, as a lot of people where using that without the Exkavator baseboard.

Sapphire also saw a lot of small cleanups of things that are not part
of the actual Sapphire board, but the baseboard instead. The rk3399-puma
board got i2s and tsadc support and Gru got its DP node enabled.

* tag 'v4.17-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: remove keep-power-in-suspend from sdhci of rk3399-sapphire
  arm64: dts: rockchip: assign clock rate for ACLK_VIO on rk3399
  arm64: dts: rockchip: add a standalone version of the rk3399 sapphire
  arm64: dts: rockchip: move rk3399-sapphire pwr_btn to daughterboard
  arm64: dts: rockchip: move rk3399-sapphire i2s2 to daughterboard
  arm64: dts: rockchip: move rk3399-sapphire sdio to excavator baseboard
  arm64: dts: rockchip: enable I2S codec on rk3399-puma-haikou
  arm64: dts: rockchip: move i2s0 node from baseboard to SoM on rk3399-puma
  arm64: dts: rockchip: vdd_log on rk3399-sapphire is not an i2c slave
  arm64: dts: rockchip: add Haikou baseboard with RK3368-uQ7 SoM
  arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM
  dt-bindings: add RK3368-uQ7 SoM and EVK base board
  arm64: dts: rockchip: Fix RK3328 UART DMAs
  arm64: dts: rockchip: enable DP for rk3399-gru
  arm64: dts: rockchip: add cdn-dp node for rk3399.
  arm64: dts: rockchip: add i2s0-2ch-bus pins on rk3399
  arm64: dts: rockchip: enable tsadc on rk3399-puma
  arm64: dts: rockchip: add roc-rk3328-cc board
  arm64: dts: rockchip: Add cif test clocks for rk3399

1 files changed, 3 insertions, 3 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index cae341554486..be2bfbc6b483 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -318,7 +318,7 @@
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&dmac 2>, <&dmac 3>;
-		#dma-cells = <2>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 		reg-io-width = <4>;
@@ -333,7 +333,7 @@
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "sclk_uart", "pclk_uart";
 		dmas = <&dmac 4>, <&dmac 5>;
-		#dma-cells = <2>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
 		reg-io-width = <4>;
@@ -348,7 +348,7 @@
 		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 		clock-names = "baudclk", "apb_pclk";
 		dmas = <&dmac 6>, <&dmac 7>;
-		#dma-cells = <2>;
+		dma-names = "tx", "rx";
 		pinctrl-names = "default";
 		pinctrl-0 = <&uart2m1_xfer>;
 		reg-io-width = <4>;