Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Device-tree updates from Olof Johansson:
 "Besides new bindings and additional descriptions of hardware blocks
  for various SoCs and boards, the main new contents here is:

  SoCs:
   - Intel Agilex (SoCFPGA)
   - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)

  New boards:
   - Allwinner:
      + RerVision H3-DVK (H3)
      + Oceanic 5205 5inMFD (H6)
      + Beelink GS2 (H6)
      + Orange Pi 3 (H6)
   - Rockchip:
      + Orange Pi RK3399
      + Nanopi NEO4
      + Veyron-Mighty Chromebook variant
   - Amlogic:
      + SEI Robotics SEI510
   - ST Micro:
      + stm32mp157a discovery1
      + stm32mp157c discovery2
   - NXP:
      + Eckelmann ci4x10 (i.MX6DL)
      + i.MX8MM EVK (i.MX8MM)
      + ZII i.MX7 RPU2 (i.MX7)
      + ZII SPB4 (VF610)
      + Zii Ultra (i.MX8M)
      + TQ TQMa7S (i.MX7Solo)
      + TQ TQMa7D (i.MX7Dual)
      + Kobo Aura (i.MX50)
      + Menlosystems M53 (i.MX53)j
   - Nvidia:
      + Jetson Nano (Tegra T210)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
  arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
  arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
  arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
  arm64: dts: bitmain: Add GPIO support for BM1880 SoC
  ARM: dts: gemini: Indent DIR-685 partition table
  dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
  ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
  arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
  arm64: dts: msm8998: thermal: Fix number of supported sensors
  arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
  arm64: dts: exynos: Move fixed-clocks out of soc
  arm64: dts: exynos: Move pmu and timer nodes out of soc
  ARM: dts: s5pv210: Fix camera clock provider on Goni board
  ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
  ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
  ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
  ARM: dts: exynos: Move pmu and timer nodes out of soc
  arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
  arm64: dts: db820c: Add sound card support
  arm64: dts: apq8096-db820c: Add HDMI display support
  ...

1 files changed, 28 insertions, 28 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index da03fa9c5662..dd5624975c9b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -676,29 +676,29 @@ ap_i2c_audio: &i2c8 {
 
 	backlight-enable {
 		bl_en: bl-en {
-			rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	cros-ec {
 		ec_ap_int_l: ec-ap-int-l {
-			rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	discrete-regulators {
 		sd_io_pwr_en: sd-io-pwr-en {
-			rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
 		};
 
 		sd_pwr_1800_sel: sd-pwr-1800-sel {
-			rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
 		};
 
 		sd_slot_pwr_en: sd-slot-pwr-en {
-			rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
 		};
 	};
@@ -706,17 +706,17 @@ ap_i2c_audio: &i2c8 {
 	codec {
 		/* Has external pullup */
 		headset_int_l: headset-int-l {
-			rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		mic_int: mic-int {
-			rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
 	max98357a {
 		sdmode_en: sdmode-en {
-			rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
@@ -727,7 +727,7 @@ ap_i2c_audio: &i2c8 {
 			 * to hack this as gpio, so the EP could be able to
 			 * de-assert it along and make ClockPM(CPM) work.
 			 */
-			rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -738,20 +738,20 @@ ap_i2c_audio: &i2c8 {
 		 */
 		sdmmc_bus4: sdmmc-bus4 {
 			rockchip,pins =
-				<4 8 RK_FUNC_1 &pcfg_pull_none_8ma>,
-				<4 9 RK_FUNC_1 &pcfg_pull_none_8ma>,
-				<4 10 RK_FUNC_1 &pcfg_pull_none_8ma>,
-				<4 11 RK_FUNC_1 &pcfg_pull_none_8ma>;
+				<4 RK_PB0 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB1 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB2 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB3 1 &pcfg_pull_none_8ma>;
 		};
 
 		sdmmc_clk: sdmmc-clk {
 			rockchip,pins =
-				<4 12 RK_FUNC_1 &pcfg_pull_none_8ma>;
+				<4 RK_PB4 1 &pcfg_pull_none_8ma>;
 		};
 
 		sdmmc_cmd: sdmmc-cmd {
 			rockchip,pins =
-				<4 13 RK_FUNC_1 &pcfg_pull_none_8ma>;
+				<4 RK_PB5 1 &pcfg_pull_none_8ma>;
 		};
 
 		/*
@@ -765,12 +765,12 @@ ap_i2c_audio: &i2c8 {
 		 */
 		sdmmc_cd: sdmmc-cd {
 			rockchip,pins =
-				<0 7 RK_FUNC_1 &pcfg_pull_none>;
+				<0 RK_PA7 1 &pcfg_pull_none>;
 		};
 
 		/* This is where we actually hook up CD; has external pull */
 		sdmmc_cd_gpio: sdmmc-cd-gpio {
-			rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -780,47 +780,47 @@ ap_i2c_audio: &i2c8 {
 			 * Pull down SPI1 CLK/CS/RX/TX during suspend, to
 			 * prevent leakage.
 			 */
-			rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>,
-					<1 10 RK_FUNC_GPIO &pcfg_pull_down>,
-					<1 7 RK_FUNC_GPIO &pcfg_pull_down>,
-					<1 8 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
 	touchscreen {
 		touch_int_l: touch-int-l {
-			rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
 		touch_reset_l: touch-reset-l {
-			rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	trackpad {
 		ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
-			rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>;
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 
 		trackpad_int_l: trackpad-int-l {
-			rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	wifi: wifi {
 		wlan_module_reset_l: wlan-module-reset-l {
-			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		bt_host_wake_l: bt-host-wake-l {
 			/* Kevin has an external pull up, but Gru does not */
-			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	write-protect {
 		ap_fw_wp: ap-fw-wp {
-			rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 };