Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM DT updates from Arnd Bergmann:
 "There are 40 branches this time, adding a lot of new hardware support,
  and cleanups. Krzysztof Kozlowski continues his treewide cleanups.

  There are a number of new SoCs, all of them as part of existing
  families, and typically added along with a reference board:

   - Renesas RZ/G2UL (R9A07G043) is the single-core version of the
     RZ/G2L general-purpose MPU.

   - Renesas RZ/V2M (R9A09G011) is a smart camera SoC

   - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
     cores and deep learning accerlation.

   - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
     and dual Wifi-6.

   - Corstone1000 is a generic platform from Arm that is used for
     designing custom SoCs, the support for now is for the Fixed Virtual
     Platform emulation for it.

   - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
     upcoming Chromebooks.

   - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
     MMU-less SoC to be added in a while

  New machines based on already supported SoCs this time are mainly for
  32-bit platforms and include:

   - Two wireless routers based on Broadcom bcm4708

   - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
     for the industrial embedded market, and on NXP LS1021A based IOT
     board.

   - Two ethernet switches based on Microchip LAN966

   - Eight Qualcomm Snapdragon based machines, including a smartwatch, a
     Chromebook board and some phones

   - Another phone based on the old ST-Ericsson Ux500 platform

   - Seven STM32MP1 based boards

   - Four single-board computers based on Rockchip RK3566/RK3568"

* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
  ARM: dts: kswitch-d10: enable networking
  ARM: dts: lan966x: add switch node
  ARM: dts: lan966x: add serdes node
  ARM: dts: lan966x: add reset switch reset node
  ARM: dts: lan966x: add MIIM nodes
  ARM: dts: lan966x: add hwmon node
  ARM: dts: lan966x: add basic Kontron KSwitch D10 support
  ARM: dts: lan966x: add flexcom I2C nodes
  ARM: dts: lan966x: add flexcom SPI nodes
  ARM: dts: lan966x: add all flexcom usart nodes
  ARM: dts: lan966x: add missing uart DMA channel
  ARM: dts: lan966x: add sgpio node
  ARM: dts: lan966x: swap dma channels for crypto node
  ARM: dts: lan966x: rename pinctrl nodes
  ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
  ARM: dts: at91: use generic node name for dataflash
  ARM: dts: turris-omnia: Add atsha204a node
  arm64: dts: mt8192: Follow binding order for SCP registers
  arm64: dts: mediatek: add mtk-snfi for mt7622
  arm64: dts: mediatek: mt8195-demo: enable uart1
  ...

1 files changed, 102 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 067fe4a6b178..40cf2236c0b6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -73,6 +73,55 @@
 		regulator-max-microvolt = <5000000>;
 		vin-supply = <&dc_12v>;
 	};
+
+	vcc5v0_usb: vcc5v0_usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&combphy0 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy1 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy2 {
+	/* used for SATA */
+	status = "okay";
 };
 
 &gmac0 {
@@ -368,6 +417,16 @@
 				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -430,6 +489,10 @@
 	status = "okay";
 };
 
+&sata2 {
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;
@@ -485,3 +548,42 @@
 	pinctrl-0 = <&uart9m1_xfer>;
 	status = "disabled";
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};