diff options
| author | Kishon Vijay Abraham I <kishon@ti.com> | 2021-06-03 19:52:50 +0530 |
|---|---|---|
| committer | Nishanth Menon <nm@ti.com> | 2021-06-08 09:32:38 -0500 |
| commit | 4e8aa4e3559a7f71e333b0fb8661f302aec64c5c (patch) | |
| tree | 4d5eaa9b5c36aa9b6f4ebc899f130a407a86f62b /arch/arm64/boot/dts/ti | |
| parent | 354065bed2d15f6ff7796c8105133ccdf3a84917 (diff) | |
arm64: dts: ti: k3-am642-sk: Enable USB Super-Speed HOST port
Enable USB Super-Speed HOST port.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-5-kishon@ti.com
Diffstat (limited to 'arch/arm64/boot/dts/ti')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am642-sk.dts | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 8424cd071955..077b87656fbc 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -5,6 +5,8 @@ /dts-v1/; +#include <dt-bindings/mux/ti-serdes.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> #include "k3-am642.dtsi" @@ -85,6 +87,12 @@ >; }; + main_usb0_pins_default: main-usb0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ + >; + }; + main_i2c1_pins_default: main-i2c1-pins-default { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ @@ -235,6 +243,33 @@ disable-wp; }; +&serdes_ln_ctrl { + idle-states = <AM64_SERDES0_LANE0_USB>; +}; + +&serdes0 { + serdes0_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 1>; + }; +}; + +&usbss0 { + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "host"; + maximum-speed = "super-speed"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb0_pins_default>; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&mdio1_pins_default |