Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...

1 files changed, 60 insertions, 8 deletions

diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts
index bb900d2bbcfb..cb2519ecd724 100644
--- a/arch/arm64/boot/dts/zte/zx296718-evb.dts
+++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts
@@ -57,16 +57,28 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
-	sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "zx_snd_spdif0";
+	sound-spdif0 {
+		compatible = "audio-graph-card";
+		dais = <&spdif0_port>;
+	};
 
-		simple-audio-card,cpu {
-			sound-dai = <&spdif0>;
-		};
+	sound-i2s0 {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_port>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&amplifier_pins>;
+		pa-gpios = <&bgpio4 0 GPIO_ACTIVE_HIGH>;
+		widgets = "Line", "Line Out Jack";
+		routing = "Amplifier", "LINEOUTL",
+			  "Amplifier", "LINEOUTR",
+			  "Line Out Jack", "Amplifier";
+	};
+};
 
-		simple-audio-card,codec {
-			sound-dai = <&hdmi>;
+&aud96p22 {
+	port {
+		aud96p22_endpoint: endpoint {
+			remote-endpoint = <&i2s0_endpoint>;
 		};
 	};
 };
@@ -77,6 +89,36 @@
 
 &hdmi {
 	status = "okay";
+
+	port {
+		hdmi_endpoint: endpoint {
+			remote-endpoint = <&spdif0_endpoint>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+
+	i2s0_port: port {
+		i2s0_endpoint: endpoint {
+			remote-endpoint = <&aud96p22_endpoint>;
+			dai-format = "i2s";
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&pmm {
+	amplifier_pins: amplifier {
+		pins = "TSI3_DATA";
+		function = "BGPIO";
+	};
 };
 
 &sd1 {
@@ -85,6 +127,16 @@
 
 &spdif0 {
 	status = "okay";
+
+	spdif0_port: port {
+		spdif0_endpoint: endpoint {
+			remote-endpoint = <&hdmi_endpoint>;
+		};
+	};
+};
+
+&tvenc {
+	status = "okay";
 };
 
 &uart0 {