diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2022-05-13 16:31:01 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2022-05-13 16:31:01 +0200 |
| commit | 5aef4d1ecc9758bf4b8d8749060c9b097d0100b3 (patch) | |
| tree | 665d99d5964f14aaf87dbb6626af1fd3c897c239 /arch/arm64/boot | |
| parent | 9dd7a5a896355515ca3b92da6a5802d0a066781a (diff) | |
| parent | 239466bddfc02f9643f64be74ba9a1d80c286f4b (diff) | |
Merge tag 'mvebu-dt64-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.19 (part 1)
Update sdhci node names to match schema on all mvebu dt64 dtsi files
Armada 3720:
uDPU board:
- correct temperature sensors
- update partition table
espressobin-ultra board:
- enable front USB3 port
- add PHY and switch reset pins
- fix SPI-NOR config
* tag 'mvebu-dt64-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Update sdhci node names to match schema
arm64: dts: marvell: espressobin-ultra: enable front USB3 port
arm64: dts: marvell: espressobin-ultra: add PHY and switch reset pins
arm64: dts: marvell: espressobin-ultra: fix SPI-NOR config
arm64: dts: uDPU: correct temperature sensors
arm64: dts: uDPU: update partition table
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64/boot')
5 files changed, 20 insertions, 16 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index c5eb3604dd5b..070725b81be5 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -71,10 +71,6 @@ &spi0 { flash@0 { - spi-max-frequency = <108000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - partitions { compatible = "fixed-partitions"; #address-cells = <1>; @@ -112,18 +108,21 @@ &usb3 { usb-phy = <&usb3_phy>; - status = "disabled"; }; &mdio { extphy: ethernet-phy@1 { reg = <1>; + + reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>; }; }; &switch0 { reg = <3>; + reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; + ports { switch0port1: port@1 { reg = <1>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index a4de8d00cf46..a35317d24d6c 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -108,10 +108,15 @@ compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; - /* only bootloader is located on the SPI */ + partition@0 { - label = "uboot"; - reg = <0 0x400000>; + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; }; }; }; @@ -148,15 +153,15 @@ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - lm75@48 { + nct375@48 { status = "okay"; - compatible = "lm75"; + compatible = "ti,tmp75c"; reg = <0x48>; }; - lm75@49 { + nct375@49 { status = "okay"; - compatible = "lm75"; + compatible = "ti,tmp75c"; reg = <0x49>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 8c8bb97c9d30..df152c72276b 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -444,7 +444,7 @@ #mbox-cells = <1>; }; - sdhci1: sdhci@d0000 { + sdhci1: mmc@d0000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; reg = <0xd0000 0x300>, @@ -455,7 +455,7 @@ status = "disabled"; }; - sdhci0: sdhci@d8000 { + sdhci0: mmc@d8000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; reg = <0xd8000 0x300>, diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index 6614472100c2..a06a0a889c43 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -250,7 +250,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; }; - ap_sdhci0: sdhci@6e0000 { + ap_sdhci0: mmc@6e0000 { compatible = "marvell,armada-ap806-sdhci"; reg = <0x6e0000 0x300>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 3bd2182817fb..d6c0990a267d 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -493,7 +493,7 @@ status = "okay"; }; - CP11X_LABEL(sdhci0): sdhci@780000 { + CP11X_LABEL(sdhci0): mmc@780000 { compatible = "marvell,armada-cp110-sdhci"; reg = <0x780000 0x300>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; |