diff options
| author | Krzysztof Kozlowski <krzk@kernel.org> | 2020-09-17 20:54:48 +0200 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2020-09-22 17:06:04 +0800 |
| commit | 4153f7811a9b2b6f65f9ba5470d4f3e020ad1b7c (patch) | |
| tree | 5fd35cf56245f948fbec061d6349785c40bf5f59 /arch/arm64 | |
| parent | 5f67317bd967bbdde945ce3a586d3841f8a5bf65 (diff) | |
arm64: dts: imx8mn: correct interrupt flags
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
For level low interrupts, enable also internal pull up. It is
required at least on imx8mm-evk, according to schematics.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm64')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 2 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 3 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 2 |
3 files changed, 4 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 68fa943ea8d8..46e76cf32b2f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -55,7 +55,7 @@ reg = <0x4b>; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; regulators { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts index b846526a8d8b..707d8486b4d8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -7,6 +7,7 @@ #include "imx8mn.dtsi" #include "imx8mn-evk.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "NXP i.MX8MNano EVK board"; @@ -19,7 +20,7 @@ reg = <0x25>; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; regulators { buck1: BUCK1{ diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 7f4b904e9982..4aa0dbd578df 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -225,7 +225,7 @@ pinctrl_pmic: pmicirqgrp { fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 >; }; |