diff options
| author | Judy Hsiao <judyhsiao@chromium.org> | 2022-07-08 08:07:26 +0000 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2022-09-10 01:08:48 +0200 |
| commit | 91419ae0420f0c91a326655d687b740826d0a3f9 (patch) | |
| tree | 449f09de483eedfe4cd2f7554adb686edad6628a /arch/arm64 | |
| parent | 03d86fb5a56919ccf47e1cc5861bb5452017ab93 (diff) | |
arm64: dts: rockchip: use BCLK to GPIO switch on rk3399
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.
In order to:
1. prevent BCLK from turning on by other component.
2. keep BCLK and LRCLK being present at the same time
This patch adjusts the device tree to allow BCLK to switch
to GPIO func before LRCLK output, and switch back during
LRCLK is output.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220708080726.4170711-1-judyhsiao@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Diffstat (limited to 'arch/arm64')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 10 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 |
2 files changed, 34 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 40d4053fba80..ed3348b558f8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -768,6 +768,16 @@ camera: &i2c7 { <4 RK_PA0 1 &pcfg_pull_none_6ma>; }; +&i2s0_8ch_bus_bclk_off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none_6ma>, + <3 RK_PD1 1 &pcfg_pull_none_6ma>, + <3 RK_PD2 1 &pcfg_pull_none_6ma>, + <3 RK_PD3 1 &pcfg_pull_none_6ma>, + <3 RK_PD7 1 &pcfg_pull_none_6ma>, + <4 RK_PA0 1 &pcfg_pull_none_6ma>; +}; + /* there is no external pull up, so need to set this pin pull up */ &sdmmc_cd_pin { rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 9d5b0e8c9cca..f4fbd5bece0e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1664,8 +1664,9 @@ dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; - pinctrl-names = "default"; + pinctrl-names = "bclk_on", "bclk_off"; pinctrl-0 = <&i2s0_8ch_bus>; + pinctrl-1 = <&i2s0_8ch_bus_bclk_off>; power-domains = <&power RK3399_PD_SDIOAUDIO>; #sound-dai-cells = <0>; status = "disabled"; @@ -2409,6 +2410,19 @@ <3 RK_PD7 1 &pcfg_pull_none>, <4 RK_PA0 1 &pcfg_pull_none>; }; + + i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; + }; }; i2s1 { @@ -2420,6 +2434,15 @@ <4 RK_PA6 1 &pcfg_pull_none>, <4 RK_PA7 1 &pcfg_pull_none>; }; + + i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off { + rockchip,pins = + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PA4 1 &pcfg_pull_none>, + <4 RK_PA5 1 &pcfg_pull_none>, + <4 RK_PA6 1 &pcfg_pull_none>, + <4 RK_PA7 1 &pcfg_pull_none>; + }; }; sdio0 { |