Merge branch 'linus' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

13 files changed, 65 insertions, 25 deletions

diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b3df1c60d465..386eee6de232 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -239,14 +239,25 @@
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <100000000>;
 			bus-width = <4>;
+			cap-sd-highspeed;
 			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			/* All direction control is used */
+			st,sig-dir-cmd;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdi0_default_mode>;
 			pinctrl-1 = <&sdi0_sleep_mode>;
 
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218
+			/* GPIO218 MMC_CD */
+			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
 			status = "okay";
 		};
@@ -549,7 +560,7 @@
 					/* VMMCI level-shifter enable */
 					snowball_cfg3 {
 						pins = "GPIO217_AH12";
-						ste,config = <&gpio_out_lo>;
+						ste,config = <&gpio_out_hi>;
 					};
 					/* VMMCI level-shifter voltage select */
 					snowball_cfg4 {
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 2c49c3614bda..5357ea9c14b1 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -184,11 +184,11 @@
 };
 
 &mio_clk {
-	compatible = "socionext,uniphier-pro5-mio-clock";
+	compatible = "socionext,uniphier-pro5-sd-clock";
 };
 
 &mio_rst {
-	compatible = "socionext,uniphier-pro5-mio-reset";
+	compatible = "socionext,uniphier-pro5-sd-reset";
 };
 
 &peri_clk {
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 8789cd518933..950f07ba0337 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -197,11 +197,11 @@
 };
 
 &mio_clk {
-	compatible = "socionext,uniphier-pxs2-mio-clock";
+	compatible = "socionext,uniphier-pxs2-sd-clock";
 };
 
 &mio_rst {
-	compatible = "socionext,uniphier-pxs2-mio-reset";
+	compatible = "socionext,uniphier-pxs2-sd-reset";
 };
 
 &peri_clk {
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index a3824e61bd72..d7fdb2a7d97b 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -70,7 +70,7 @@
 			global_timer: timer@40002200 {
 				compatible = "arm,cortex-a9-global-timer";
 				reg = <0x40002200 0x20>;
-				interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 				interrupt-parent = <&intc>;
 				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
 			};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 437d0740dec6..11f37ed1dbff 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -850,6 +850,7 @@ CONFIG_PWM_SUN4I=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_PHY_HIX5HD2_SATA=y
+CONFIG_E1000E=y
 CONFIG_PWM_STI=y
 CONFIG_PWM_BCM2835=y
 CONFIG_PWM_BRCMSTB=m
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 194b69923389..ada0d29a660f 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -19,7 +19,7 @@
  * This may need to be greater than __NR_last_syscall+1 in order to
  * account for the padding in the syscall table
  */
-#define __NR_syscalls  (396)
+#define __NR_syscalls  (400)
 
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_GETHOSTNAME
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index 2cb9dc770e1d..314100a06ccb 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -420,6 +420,9 @@
 #define __NR_copy_file_range		(__NR_SYSCALL_BASE+391)
 #define __NR_preadv2			(__NR_SYSCALL_BASE+392)
 #define __NR_pwritev2			(__NR_SYSCALL_BASE+393)
+#define __NR_pkey_mprotect		(__NR_SYSCALL_BASE+394)
+#define __NR_pkey_alloc			(__NR_SYSCALL_BASE+395)
+#define __NR_pkey_free			(__NR_SYSCALL_BASE+396)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 703fa0f3cd8f..08030b18f10a 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -403,6 +403,9 @@
 		CALL(sys_copy_file_range)
 		CALL(sys_preadv2)
 		CALL(sys_pwritev2)
+		CALL(sys_pkey_mprotect)
+/* 395 */	CALL(sys_pkey_alloc)
+		CALL(sys_pkey_free)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 0df062d8b2c9..b54db47f6f32 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -408,7 +408,7 @@ static struct genpd_onecell_data imx_gpc_onecell_data = {
 static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 {
 	struct clk *clk;
-	int i;
+	int i, ret;
 
 	imx6q_pu_domain.reg = pu_reg;
 
@@ -430,13 +430,22 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 	if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
 		return 0;
 
-	pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
-	return of_genpd_add_provider_onecell(dev->of_node,
+	for (i = 0; i < ARRAY_SIZE(imx_gpc_domains); i++)
+		pm_genpd_init(imx_gpc_domains[i], NULL, false);
+
+	ret =  of_genpd_add_provider_onecell(dev->of_node,
 					     &imx_gpc_onecell_data);
+	if (ret)
+		goto power_off;
+
+	return 0;
 
+power_off:
+	imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
 clk_err:
 	while (i--)
 		clk_put(imx6q_pu_domain.clk[i]);
+	imx6q_pu_domain.reg = NULL;
 	return -EINVAL;
 }
 
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 97fd25105e2c..45801b27ee5c 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -173,7 +173,7 @@ static void __init imx6q_enet_phy_init(void)
 				ksz9021rn_phy_fixup);
 		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
 				ksz9031rn_phy_fixup);
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
 				ar8031_phy_fixup);
 		phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
 				ar8035_phy_fixup);
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index f9b6bd306cfe..541647f57192 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -23,6 +23,7 @@ config MACH_MVEBU_V7
 	select CACHE_L2X0
 	select ARM_CPU_SUSPEND
 	select MACH_MVEBU_ANY
+	select MVEBU_CLK_COREDIV
 
 config MACH_ARMADA_370
 	bool "Marvell Armada 370 boards"
@@ -32,7 +33,6 @@ config MACH_ARMADA_370
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_370
-	select MVEBU_CLK_COREDIV
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 370 SoC with device tree.
@@ -50,7 +50,6 @@ config MACH_ARMADA_375
 	select HAVE_SMP
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_375
-	select MVEBU_CLK_COREDIV
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 375 SoC with device tree.
@@ -68,7 +67,6 @@ config MACH_ARMADA_38X
 	select HAVE_SMP
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_38X
-	select MVEBU_CLK_COREDIV
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 380/385 SoC with device tree.
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 82dddee3a469..3930fbba30b4 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -1,6 +1,7 @@
 config ARCH_UNIPHIER
 	bool "Socionext UniPhier SoCs"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_AMBA
 	select ARM_GLOBAL_TIMER
 	select ARM_GIC
diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S
index 6d8e8e3365d1..4cdfab31a0b6 100644
--- a/arch/arm/mm/abort-lv4t.S
+++ b/arch/arm/mm/abort-lv4t.S
@@ -7,7 +7,7 @@
  *	   : r4 = aborted context pc
  *	   : r5 = aborted context psr
  *
- * Returns : r4-r5, r10-r11, r13 preserved
+ * Returns : r4-r5, r9-r11, r13 preserved
  *
  * Purpose : obtain information about current aborted instruction.
  * Note: we read user space.  This means we might cause a data
@@ -48,7 +48,10 @@ ENTRY(v4t_late_abort)
 /* c */	b	do_DataAbort			@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
 /* d */	b	do_DataAbort			@ ldc	rd, [rn, #m]
 /* e */	b	.data_unknown
-/* f */
+/* f */	b	.data_unknown
+
+.data_unknown_r9:
+	ldr	r9, [sp], #4
 .data_unknown:	@ Part of jumptable
 	mov	r0, r4
 	mov	r1, r8
@@ -57,6 +60,7 @@ ENTRY(v4t_late_abort)
 .data_arm_ldmstm:
 	tst	r8, #1 << 21			@ check writeback bit
 	beq	do_DataAbort			@ no writeback -> no fixup
+	str	r9, [sp, #-4]!
 	mov	r7, #0x11
 	orr	r7, r7, #0x1100
 	and	r6, r8, r7
@@ -75,12 +79,14 @@ ENTRY(v4t_late_abort)
 	subne	r7, r7, r6, lsl #2		@ Undo increment
 	addeq	r7, r7, r6, lsl #2		@ Undo decrement
 	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_arm_lateldrhpre:
 	tst	r8, #1 << 21			@ Check writeback bit
 	beq	do_DataAbort			@ No writeback -> no fixup
 .data_arm_lateldrhpost:
+	str	r9, [sp, #-4]!
 	and	r9, r8, #0x00f			@ get Rm / low nibble of immediate value
 	tst	r8, #1 << 22			@ if (immediate offset)
 	andne	r6, r8, #0xf00			@ { immediate high nibble
@@ -93,6 +99,7 @@ ENTRY(v4t_late_abort)
 	subne	r7, r7, r6			@ Undo incrmenet
 	addeq	r7, r7, r6			@ Undo decrement
 	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_arm_lateldrpreconst:
@@ -101,12 +108,14 @@ ENTRY(v4t_late_abort)
 .data_arm_lateldrpostconst:
 	movs	r6, r8, lsl #20			@ Get offset
 	beq	do_DataAbort			@ zero -> no fixup
+	str	r9, [sp, #-4]!
 	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
 	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
 	tst	r8, #1 << 23			@ Check U bit
 	subne	r7, r7, r6, lsr #20		@ Undo increment
 	addeq	r7, r7, r6, lsr #20		@ Undo decrement
 	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_arm_lateldrprereg:
@@ -115,6 +124,7 @@ ENTRY(v4t_late_abort)
 .data_arm_lateldrpostreg:
 	and	r7, r8, #15			@ Extract 'm' from instruction
 	ldr	r6, [r2, r7, lsl #2]		@ Get register 'Rm'
+	str	r9, [sp, #-4]!
 	mov	r9, r8, lsr #7			@ get shift count
 	ands	r9, r9, #31
 	and	r7, r8, #0x70			@ get shift type
@@ -126,33 +136,33 @@ ENTRY(v4t_late_abort)
 	b	.data_arm_apply_r6_and_rn
 	b	.data_arm_apply_r6_and_rn	@ 1: LSL #0
 	nop
-	b	.data_unknown			@ 2: MUL?
+	b	.data_unknown_r9		@ 2: MUL?
 	nop
-	b	.data_unknown			@ 3: MUL?
+	b	.data_unknown_r9		@ 3: MUL?
 	nop
 	mov	r6, r6, lsr r9			@ 4: LSR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, lsr #32			@ 5: LSR #32
 	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ 6: MUL?
+	b	.data_unknown_r9		@ 6: MUL?
 	nop
-	b	.data_unknown			@ 7: MUL?
+	b	.data_unknown_r9		@ 7: MUL?
 	nop
 	mov	r6, r6, asr r9			@ 8: ASR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, asr #32			@ 9: ASR #32
 	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ A: MUL?
+	b	.data_unknown_r9		@ A: MUL?
 	nop
-	b	.data_unknown			@ B: MUL?
+	b	.data_unknown_r9		@ B: MUL?
 	nop
 	mov	r6, r6, ror r9			@ C: ROR #!0
 	b	.data_arm_apply_r6_and_rn
 	mov	r6, r6, rrx			@ D: RRX
 	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ E: MUL?
+	b	.data_unknown_r9		@ E: MUL?
 	nop
-	b	.data_unknown			@ F: MUL?
+	b	.data_unknown_r9		@ F: MUL?
 
 .data_thumb_abort:
 	ldrh	r8, [r4]			@ read instruction
@@ -190,6 +200,7 @@ ENTRY(v4t_late_abort)
 .data_thumb_pushpop:
 	tst	r8, #1 << 10
 	beq	.data_unknown
+	str	r9, [sp, #-4]!
 	and	r6, r8, #0x55			@ hweight8(r8) + R bit
 	and	r9, r8, #0xaa
 	add	r6, r6, r9, lsr #1
@@ -204,9 +215,11 @@ ENTRY(v4t_late_abort)
 	addeq	r7, r7, r6, lsl #2		@ increment SP if PUSH
 	subne	r7, r7, r6, lsl #2		@ decrement SP if POP
 	str	r7, [r2, #13 << 2]
+	ldr	r9, [sp], #4
 	b	do_DataAbort
 
 .data_thumb_ldmstm:
+	str	r9, [sp, #-4]!
 	and	r6, r8, #0x55			@ hweight8(r8)
 	and	r9, r8, #0xaa
 	add	r6, r6, r9, lsr #1
@@ -219,4 +232,5 @@ ENTRY(v4t_late_abort)
 	and	r6, r6, #15			@ number of regs to transfer
 	sub	r7, r7, r6, lsl #2		@ always decrement
 	str	r7, [r2, r9, lsr #6]
+	ldr	r9, [sp], #4
 	b	do_DataAbort