diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-12-31 17:36:02 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-12-31 17:36:02 -0800 |
| commit | b7badd1d7aa61087010803affa19bb83fb5a0af1 (patch) | |
| tree | 3b2a913060d952d93bc5a712dca10733a17e3c99 /arch/arm | |
| parent | d36377c6eb071e3d0751e9e0e3c19198c58d9a5d (diff) | |
| parent | 3f47de2c6b6068cf7d5221f8f307969e7e4f1fc5 (diff) | |
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM Device-tree updates from Olof Johansson:
"As usual, this is where the bulk of our changes end up landing each
merge window.
The individual updates are too many to enumerate, many many platforms
have seen additions of device descriptions such that they are
functionally more complete (in fact, this is often the bulk of updates
we see).
Instead I've mostly focused on highlighting the new platforms below as
they are introduced. Sometimes the introduction is of mostly a
fragment, that later gets filled in on later releases, and in some
cases it's near-complete platform support. The latter is more common
for derivative platforms that already has similar support in-tree.
Two SoCs are slight outliers from the usual range of additions.
Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping
in the Lychee Pi Nano platform. At the other end is NXP Layerscape
LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O
aimed at infrastructure/networking.
TI updates stick out in the diff stats too, in particular because they
have moved the description of their L4 on-chip interconnect to
devicetree, which opens up for removal of even more of their
platform-specific 'hwmod' description tables over the next few
releases.
SoCs:
- Qualcomm QCS404 (4x Cortex-A53)
- Allwinner T3 (rebranded R40) and f1c100s (armv5)
- NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
- NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)
New platforms:
- Rockchip: Gru Scarlet (RK3188 Tablet)
- Amlogic: Phicomm N1 (S905D), Libretech S805-AC
- Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
- Qualcomm: QCS404 base platform and EVB
- Qualcomm: Remove of Arrow SD600
- PXA: First PXA3xx DT board: Raumfeld
- Aspeed: Facebook Backpack-CMM BMC
- Renesas iWave G20D-Q7 (RZ/G1N)
- Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
- Allwinner Emlid Neutis N5, Mapleboard MP130
- Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
- i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
- VF610: Liebherr's BK4 device, ZII SCU4 AIB board
- i.MX7D PICO Hobbit baseboard
- i.MX7ULP EVK board
- NXP LX2160AQDS and LX2160ARDB boards
Other:
- Coresight binding updates across the board
- CPU cooling maps updates across the board"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits)
ARM: dts: suniv: Fix improper bindings include patch
ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards
arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node
ARM: dts: suniv: Fix improper bindings include patch
arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
arm64: dts: Remove unused properties from FSL QSPI driver nodes
ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
ARM: dts: Remove unused properties from FSL QSPI driver nodes
arm64: dts: ti: k3-am654: Enable main domain McSPI0
arm64: dts: ti: k3-am654: Add McSPI DT nodes
arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
arm64: dts: ti: k3-am65-main: Add ECAP PWM node
arm64: dts: ti: k3-am654-base-board: Add I2C nodes
arm64: dts: ti: am654-base-board: Add pinmux for main uart0
arm64: dts: ti: k3-am65: Add pinctrl regions
dt-bindings: pinctrl: k3: Introduce pinmux definitions
ARM: dts: exynos: Specify I2S assigned clocks in proper node
ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
...
Diffstat (limited to 'arch/arm')
521 files changed, 24710 insertions, 10499 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b0e966d625b9..78551c4375d5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-linksys-ea6300-v1.dtb \ + bcm4708-linksys-ea6500-v2.dtb \ bcm4708-luxul-xap-1510.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ @@ -396,6 +397,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ imx6dl-dfi-fs700-m60.dtb \ + imx6dl-emcon-avari.dtb \ imx6dl-gw51xx.dtb \ imx6dl-gw52xx.dtb \ imx6dl-gw53xx.dtb \ @@ -460,6 +462,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ imx6q-dms-ba16.dtb \ + imx6q-emcon-avari.dtb \ imx6q-evi.dtb \ imx6q-gk802.dtb \ imx6q-gw51xx.dtb \ @@ -557,6 +560,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-liteboard.dtb \ imx6ul-opos6uldev.dtb \ imx6ul-pico-hobbit.dtb \ + imx6ul-pico-pi.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ @@ -569,18 +573,23 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ + imx7d-pico-hobbit.dtb \ imx7d-pico-pi.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ + imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-warp.dtb +dtb-$(CONFIG_SOC_IMX7ULP) += \ + imx7ulp-evk.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ + vf610-bk4.dtb \ vf610-colibri-eval-v3.dtb \ vf610m4-colibri.dtb \ vf610-cosmic.dtb \ @@ -589,6 +598,7 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-zii-cfu1.dtb \ vf610-zii-dev-rev-b.dtb \ vf610-zii-dev-rev-c.dtb \ + vf610-zii-scu4-aib.dtb \ vf610-zii-ssmb-spu3.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ @@ -778,12 +788,18 @@ dtb-$(CONFIG_ARCH_ACTIONS) += \ owl-s500-sparky.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb +dtb-$(CONFIG_ARCH_PXA) += \ + pxa300-raumfeld-connector.dtb \ + pxa300-raumfeld-controller.dtb \ + pxa300-raumfeld-speaker-l.dtb \ + pxa300-raumfeld-speaker-m.dtb \ + pxa300-raumfeld-speaker-one.dtb \ + pxa300-raumfeld-speaker-s.dtb dtb-$(CONFIG_ARCH_OXNAS) += \ ox810se-wd-mbwe.dtb \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8060-dragonboard.dtb \ - qcom-apq8064-arrow-sd-600eval.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ @@ -829,6 +845,8 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7743-iwg20d-q7.dtb \ r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ + r8a7744-iwg20d-q7.dtb \ + r8a7744-iwg20d-q7-dbcm-ca.dtb \ r8a7745-iwg22d-sodimm.dtb \ r8a7745-iwg22d-sodimm-dbhd-ca.dtb \ r8a7745-sk-rzg1e.dtb \ @@ -854,6 +872,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-marsboard.dtb \ rk3066a-mk808.dtb \ rk3066a-rayeager.dtb \ + rk3188-bqedison2qc.dtb \ rk3188-px3-evb.dtb \ rk3188-radxarock.dtb \ rk3228-evb.dtb \ @@ -1043,6 +1062,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-bananapi-m2-plus-v1.2.dtb \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ + sun8i-h3-mapleboard-mp130.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ @@ -1060,12 +1080,15 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb +dtb-$(CONFIG_MACH_SUNIV) += \ + suniv-f1c100s-licheepi-nano.dtb dtb-$(CONFIG_ARCH_TANGO) += \ tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ @@ -1212,6 +1235,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ + aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-opp-lanyang.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 9e5e75ea87f5..456eef57ef89 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -419,6 +419,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 7bcd72691f06..ccb147e70d17 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -515,7 +515,7 @@ &rtc { system-power-controller; - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index c4d3e1f1a95e..2c724bb60417 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -393,7 +393,7 @@ status = "okay"; &epwmss0 { status = "okay"; - ecap0: ecap@48300100 { + ecap0: ecap@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 98ec9c3e49ba..b67f5fee1469 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -519,7 +519,7 @@ &epwmss0 { status = "okay"; - ecap0: ecap@48300100 { + ecap0: ecap@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>; @@ -797,6 +797,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 245868f58fe3..172c0224e7f6 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -540,7 +540,7 @@ &epwmss2 { status = "okay"; - ecap2: ecap@48304100 { + ecap2: ecap@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap2_pins>; @@ -738,6 +738,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 85cd1d0a73ca..95d54cf3849e 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -456,6 +456,6 @@ }; &rtc { - clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 1d925ed2b102..d0fd68873689 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -138,7 +138,7 @@ &epwmss1 { status = "okay"; - ehrpwm1: pwm@48302200 { + ehrpwm1: pwm@200 { pinctrl-names = "default"; pinctrl-0 = <&ehrpwm1_pins>; status = "okay"; @@ -205,7 +205,7 @@ pinctrl-1 = <&cpsw_sleep>; status = "okay"; slaves = <1>; - cpsw_emac0: slave@4a100200 { + cpsw_emac0: slave@200 { phy-mode = "mii"; phy-handle = <ðernetphy0>; }; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 95d5c9d136c5..922182439048 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -334,49 +334,49 @@ timer1_fck: timer1_fck@528 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; + clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; reg = <0x0528>; }; timer2_fck: timer2_fck@508 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0508>; }; timer3_fck: timer3_fck@50c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x050c>; }; timer4_fck: timer4_fck@510 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0510>; }; timer5_fck: timer5_fck@518 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0518>; }; timer6_fck: timer6_fck@51c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x051c>; }; timer7_fck: timer7_fck@504 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0504>; }; @@ -407,7 +407,7 @@ wdt1_fck: wdt1_fck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0538>; }; @@ -477,7 +477,7 @@ gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x053c>; }; @@ -539,86 +539,140 @@ }; &prcm { - l4_per_cm: l4_per_cm@0 { + per_cm: per-cm@0 { compatible = "ti,omap4-cm"; - reg = <0x0 0x200>; + reg = <0x0 0x400>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x0 0x200>; + ranges = <0 0x0 0x400>; - l4_per_clkctrl: clk@14 { + l4ls_clkctrl: l4ls-clkctrl@38 { compatible = "ti,clkctrl"; - reg = <0x14 0x13c>; + reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>; + #clock-cells = <2>; + }; + + l3s_clkctrl: l3s-clkctrl@1c { + compatible = "ti,clkctrl"; + reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>; + #clock-cells = <2>; + }; + + l3_clkctrl: l3-clkctrl@24 { + compatible = "ti,clkctrl"; + reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>; + #clock-cells = <2>; + }; + + l4hs_clkctrl: l4hs-clkctrl@120 { + compatible = "ti,clkctrl"; + reg = <0x120 0x4>; + #clock-cells = <2>; + }; + + pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 { + compatible = "ti,clkctrl"; + reg = <0xe8 0x4>; + #clock-cells = <2>; + }; + + cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x18>; + #clock-cells = <2>; + }; + + lcdc_clkctrl: lcdc-clkctrl@18 { + compatible = "ti,clkctrl"; + reg = <0x18 0x4>; + #clock-cells = <2>; + }; + + clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c { + compatible = "ti,clkctrl"; + reg = <0x14c 0x4>; #clock-cells = <2>; }; }; - l4_wkup_cm: l4_wkup_cm@400 { + wkup_cm: wkup-cm@400 { compatible = "ti,omap4-cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - l4_wkup_clkctrl: clk@4 { + l4_wkup_clkctrl: l4-wkup-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x10>, <0xb4 0x24>; + #clock-cells = <2>; + }; + + l3_aon_clkctrl: l3-aon-clkctrl@14 { + compatible = "ti,clkctrl"; + reg = <0x14 0x4>; + #clock-cells = <2>; + }; + + l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 { compatible = "ti,clkctrl"; - reg = <0x4 0xd4>; + reg = <0xb0 0x4>; #clock-cells = <2>; }; }; - mpu_cm: mpu_cm@600 { + mpu_cm: mpu-cm@600 { compatible = "ti,omap4-cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - mpu_clkctrl: clk@4 { + mpu_clkctrl: mpu-clkctrl@0 { compatible = "ti,clkctrl"; - reg = <0x4 0x4>; + reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4_rtc_cm@800 { + l4_rtc_cm: l4-rtc-cm@800 { compatible = "ti,omap4-cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x800 0x100>; - l4_rtc_clkctrl: clk@0 { + l4_rtc_clkctrl: l4-rtc-clkctrl@0 { compatible = "ti,clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx_l3_cm@900 { + gfx_l3_cm: gfx-l3-cm@900 { compatible = "ti,omap4-cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - gfx_l3_clkctrl: clk@4 { + gfx_l3_clkctrl: gfx-l3-clkctrl@0 { compatible = "ti,clkctrl"; - reg = <0x4 0x4>; + reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_cefuse_cm: l4_cefuse_cm@a00 { + l4_cefuse_cm: l4-cefuse-cm@a00 { compatible = "ti,omap4-cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - l4_cefuse_clkctrl: clk@20 { + l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 { compatible = "ti,clkctrl"; - reg = <0x20 0x4>; + reg = <0x0 0x24>; #clock-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi new file mode 100644 index 000000000000..7b818d9d2eab --- /dev/null +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -0,0 +1,2132 @@ +&l4_wkup { /* 0x44c00000 */ + compatible = "ti,am33xx-l4-wkup", "simple-bus"; + reg = <0x44c00000 0x800>, + <0x44c00800 0x800>, + <0x44c01000 0x400>, + <0x44c01400 0x400>; + reg-names = "ap", "la", "ia0", "ia1"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */ + <0x00100000 0x44d00000 0x100000>, /* segment 1 */ + <0x00200000 0x44e00000 0x100000>; /* segment 2 */ + + segment@0 { /* 0x44c00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>; /* ap 3 */ + }; + + segment@100000 { /* 0x44d00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */ + <0x00004000 0x00104000 0x001000>, /* ap 5 */ + <0x00080000 0x00180000 0x002000>, /* ap 6 */ + <0x00082000 0x00182000 0x001000>; /* ap 7 */ + + target-module@0 { /* 0x44d00000, ap 4 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x0 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4000>; + status = "disabled"; + }; + + target-module@80000 { /* 0x44d80000, ap 6 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x2000>; + }; + }; + + segment@200000 { /* 0x44e00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00200000 0x002000>, /* ap 8 */ + <0x00002000 0x00202000 0x001000>, /* ap 9 */ + <0x00003000 0x00203000 0x001000>, /* ap 10 */ + <0x00004000 0x00204000 0x001000>, /* ap 11 */ + <0x00005000 0x00205000 0x001000>, /* ap 12 */ + <0x00006000 0x00206000 0x001000>, /* ap 13 */ + <0x00007000 0x00207000 0x001000>, /* ap 14 */ + <0x00008000 0x00208000 0x001000>, /* ap 15 */ + <0x00009000 0x00209000 0x001000>, /* ap 16 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 17 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 18 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 20 */ + <0x0000f000 0x0020f000 0x001000>, /* ap 21 */ + <0x00010000 0x00210000 0x010000>, /* ap 22 */ + <0x00020000 0x00220000 0x010000>, /* ap 23 */ + <0x00030000 0x00230000 0x001000>, /* ap 24 */ + <0x00031000 0x00231000 0x001000>, /* ap 25 */ + <0x00032000 0x00232000 0x001000>, /* ap 26 */ + <0x00033000 0x00233000 0x001000>, /* ap 27 */ + <0x00034000 0x00234000 0x001000>, /* ap 28 */ + <0x00035000 0x00235000 0x001000>, /* ap 29 */ + <0x00036000 0x00236000 0x001000>, /* ap 30 */ + <0x00037000 0x00237000 0x001000>, /* ap 31 */ + <0x00038000 0x00238000 0x001000>, /* ap 32 */ + <0x00039000 0x00239000 0x001000>, /* ap 33 */ + <0x0003a000 0x0023a000 0x001000>, /* ap 34 */ + <0x0003e000 0x0023e000 0x001000>, /* ap 35 */ + <0x0003f000 0x0023f000 0x001000>, /* ap 36 */ + <0x0000e000 0x0020e000 0x001000>, /* ap 37 */ + <0x00040000 0x00240000 0x040000>, /* ap 38 */ + <0x00080000 0x00280000 0x001000>; /* ap 39 */ + + target-module@0 { /* 0x44e00000, ap 8 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x2000>; + + prcm: prcm@0 { + compatible = "ti,am3-prcm", "simple-bus"; + reg = <0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + }; + + target-module@3000 { /* 0x44e03000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3000 0x1000>; + }; + + target-module@5000 { /* 0x44e05000, ap 12 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5000 0x1000>; + }; + + target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x7000 0x4>, + <0x7010 0x4>, + <0x7114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 0>, + <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 18>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x1000>; + + gpio0: gpio@0 { + compatible = "ti,omap4-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x1000>; + interrupts = <96>; + }; + }; + + target-module@9000 { /* 0x44e09000, ap 16 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x9050 0x4>, + <0x9054 0x4>, + <0x9058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9000 0x1000>; + + uart0: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <72>; + status = "disabled"; + dmas = <&edma 26 0>, <&edma 27 0>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0xb000 0x8>, + <0xb010 0x8>, + <0xb090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb000 0x1000>; + + i2c0: i2c@0 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1000>; + interrupts = <70>; + status = "disabled"; + }; + }; + + target-module@d000 { /* 0x44e0d000, ap 20 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "adc_tsc"; + reg = <0xd000 0x4>, + <0xd010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_ADC_TSC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x0000d000 0x00001000>, + <0x00001000 0x0000e000 0x00001000>; + + tscadc: tscadc@0 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x1000>; + interrupts = <16>; + status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; + + tsc { + compatible = "ti,am3359-tsc"; + }; + am335x_adc: adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + }; + + target-module@10000 { /* 0x44e10000, ap 22 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x10000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x00010000>, + <0x00010000 0x00020000 0x00010000>; + + scm: scm@0 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + #pinctrl-cells = <1>; + ranges = <0 0 0x2000>; + + phy_sel: cpsw-phy-sel@650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x650 0x4>; + reg-names = "gmii-sel"; + }; + + am33xx_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x238>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon", "simple-bus"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + + edma_xbar: dma-router@f90 { + compatible = "ti,am335x-edma-crossbar"; + reg = <0xf90 0x40>; + #dma-cells = <3>; + dma-requests = <32>; + dma-masters = <&edma>; + }; + + scm_clockdomains: clockdomains { + }; + }; + }; + + target-module@31000 { /* 0x44e31000, ap 25 40.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x31000 0x4>, + <0x31010 0x4>, + <0x31014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x31000 0x1000>; + + timer1: timer@0 { + compatible = "ti,am335x-timer-1ms"; + reg = <0x0 0x400>; + interrupts = <67>; + ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; + }; + }; + + target-module@33000 { /* 0x44e33000, ap 27 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x33000 0x1000>; + }; + + target-module@35000 { /* 0x44e35000, ap 29 50.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x35000 0x4>, + <0x35010 0x4>, + <0x35014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x35000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap3-wdt"; + reg = <0x0 0x1000>; + interrupts = <91>; + }; + }; + + target-module@37000 { /* 0x44e37000, ap 31 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x37000 0x1000>; + }; + + target-module@39000 { /* 0x44e39000, ap 33 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x39000 0x1000>; + }; + + target-module@3e000 { /* 0x44e3e000, ap 35 60.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "rtc"; + reg = <0x3e074 0x4>, + <0x3e078 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */ + clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + rtc: rtc@0 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0x0 0x1000>; + interrupts = <75 + 76>; + }; + }; + + target-module@40000 { /* 0x44e40000, ap 38 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x40000>; + }; + }; +}; + +&l4_fw { /* 0x47c00000 */ + compatible = "ti,am33xx-l4-fw", "simple-bus"; + reg = <0x47c00000 0x800>, + <0x47c00800 0x800>, + <0x47c01000 0x400>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x47c00000 0x1000000>; /* segment 0 */ + + segment@0 { /* 0x47c00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 3 */ + <0x0000d000 0x0000d000 0x001000>, /* ap 4 */ + <0x0000e000 0x0000e000 0x001000>, /* ap 5 */ + <0x0000f000 0x0000f000 0x001000>, /* ap 6 */ + <0x00010000 0x00010000 0x001000>, /* ap 7 */ + <0x00011000 0x00011000 0x001000>, /* ap 8 */ + <0x0001a000 0x0001a000 0x001000>, /* ap 9 */ + <0x0001b000 0x0001b000 0x001000>, /* ap 10 */ + <0x00024000 0x00024000 0x001000>, /* ap 11 */ + <0x00025000 0x00025000 0x001000>, /* ap 12 */ + <0x00026000 0x00026000 0x001000>, /* ap 13 */ + <0x00027000 0x00027000 0x001000>, /* ap 14 */ + <0x00030000 0x00030000 0x001000>, /* ap 15 */ + <0x00031000 0x00031000 0x001000>, /* ap 16 */ + <0x00038000 0x00038000 0x001000>, /* ap 17 */ + <0x00039000 0x00039000 0x001000>, /* ap 18 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 19 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 20 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 21 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 22 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 23 */ + <0x00040000 0x00040000 0x001000>, /* ap 24 */ + <0x00046000 0x00046000 0x001000>, /* ap 25 */ + <0x00047000 0x00047000 0x001000>, /* ap 26 */ + <0x00044000 0x00044000 0x001000>, /* ap 27 */ + <0x00045000 0x00045000 0x001000>, /* ap 28 */ + <0x00028000 0x00028000 0x001000>, /* ap 29 */ + <0x00029000 0x00029000 0x001000>, /* ap 30 */ + <0x00032000 0x00032000 0x001000>, /* ap 31 */ + <0x00033000 0x00033000 0x001000>, /* ap 32 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 33 */ + <0x00041000 0x00041000 0x001000>, /* ap 34 */ + <0x00042000 0x00042000 0x001000>, /* ap 35 */ + <0x00043000 0x00043000 0x001000>, /* ap 36 */ + <0x00014000 0x00014000 0x001000>, /* ap 37 */ + <0x00015000 0x00015000 0x001000>; /* ap 38 */ + + target-module@c000 { /* 0x47c0c000, ap 3 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@e000 { /* 0x47c0e000, ap 5 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + }; + + target-module@10000 { /* 0x47c10000, ap 7 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@14000 { /* 0x47c14000, ap 37 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@1a000 { /* 0x47c1a000, ap 9 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1a000 0x1000>; + }; + + target-module@24000 { /* 0x47c24000, ap 11 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + }; + + target-module@26000 { /* 0x47c26000, ap 13 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@28000 { /* 0x47c28000, ap 29 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + }; + + target-module@30000 { /* 0x47c30000, ap 15 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>; + }; + + target-module@32000 { /* 0x47c32000, ap 31 06.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + }; + + target-module@38000 { /* 0x47c38000, ap 17 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>; + }; + + target-module@3a000 { /* 0x47c3a000, ap 19 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>; + }; + + target-module@3c000 { /* 0x47c3c000, ap 23 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>; + }; + + target-module@3e000 { /* 0x47c3e000, ap 21 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + }; + + target-module@40000 { /* 0x47c40000, ap 24 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + }; + + target-module@42000 { /* 0x47c42000, ap 35 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + }; + + target-module@44000 { /* 0x47c44000, ap 27 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x44000 0x1000>; + }; + + target-module@46000 { /* 0x47c46000, ap 25 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + }; + }; +}; + +&l4_fast { /* 0x4a000000 */ + compatible = "ti,am33xx-l4-fast", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x400>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00100000 0x00100000 0x008000>, /* ap 3 */ + <0x00108000 0x00108000 0x001000>, /* ap 4 */ + <0x00180000 0x00180000 0x020000>, /* ap 5 */ + <0x001a0000 0x001a0000 0x001000>, /* ap 6 */ + <0x00200000 0x00200000 0x080000>, /* ap 7 */ + <0x00280000 0x00280000 0x001000>, /* ap 8 */ + <0x00300000 0x00300000 0x080000>, /* ap 9 */ + <0x00380000 0x00380000 0x001000>; /* ap 10 */ + + target-module@100000 { /* 0x4a100000, ap 3 08.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "cpgmac0"; + reg = <0x101200 0x4>, + <0x101208 0x4>, + <0x101204 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x8000>; + + mac: ethernet@0 { + compatible = "ti,am335x-cpsw","ti,cpsw"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x0 0x800 + 0x1200 0x100>; + #address-cells = <1>; + #size-cells = <1>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges = <0 0 0x8000>; + syscon = <&scm_conf>; + cpsw-phy-sel = <&phy_sel>; + status = "disabled"; + + davinci_mdio: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + status = "disabled"; + }; + + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + }; + + target-module@180000 { /* 0x4a180000, ap 5 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x180000 0x20000>; + }; + + target-module@200000 { /* 0x4a200000, ap 7 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x200000 0x80000>; + }; + + target-module@300000 { /* 0x4a300000, ap 9 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x300000 0x80000>; + }; + }; +}; + +&l4_mpuss { /* 0x4b140000 */ + compatible = "ti,am33xx-l4-mpuss", "simple-bus"; + reg = <0x4b144400 0x100>, + <0x4b144800 0x400>; + reg-names = "la", "ap"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b140000 0x008000>; /* segment 0 */ + + segment@0 { /* 0x4b140000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00004800 0x00004800 0x000400>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00002000 0x00002000 0x001000>, /* ap 2 */ + <0x00004000 0x00004000 0x000400>, /* ap 3 */ + <0x00005000 0x00005000 0x000400>, /* ap 4 */ + <0x00000000 0x00000000 0x001000>, /* ap 5 */ + <0x00003000 0x00003000 0x001000>, /* ap 6 */ + <0x00000800 0x00000800 0x000800>; /* ap 7 */ + + target-module@0 { /* 0x4b140000, ap 5 02.2 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00001000>, + <0x00001000 0x00001000 0x00001000>, + <0x00002000 0x00002000 0x00001000>; + }; + + target-module@3000 { /* 0x4b143000, ap 6 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3000 0x1000>; + }; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,am33xx-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x100000>, /* segment 0 */ + <0x00100000 0x48100000 0x100000>, /* segment 1 */ + <0x00200000 0x48200000 0x100000>, /* segment 2 */ + <0x00300000 0x48300000 0x100000>, /* segment 3 */ + <0x46000000 0x46000000 0x400000>, /* l3 data port */ + <0x46400000 0x46400000 0x400000>; /* l3 data port */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>, /* ap 3 */ + <0x00001800 0x00001800 0x000400>, /* ap 4 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 5 */ + <0x00008000 0x00008000 0x001000>, /* ap 6 */ + <0x00009000 0x00009000 0x001000>, /* ap 7 */ + <0x00016000 0x00016000 0x001000>, /* ap 8 */ + <0x00017000 0x00017000 0x001000>, /* ap 9 */ + <0x00022000 0x00022000 0x001000>, /* ap 10 */ + <0x00023000 0x00023000 0x001000>, /* ap 11 */ + <0x00024000 0x00024000 0x001000>, /* ap 12 */ + <0x00025000 0x00025000 0x001000>, /* ap 13 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 14 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 15 */ + <0x00038000 0x00038000 0x002000>, /* ap 16 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 17 */ + <0x00014000 0x00014000 0x001000>, /* ap 18 */ + <0x00015000 0x00015000 0x001000>, /* ap 19 */ + <0x0003c000 0x0003c000 0x002000>, /* ap 20 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 21 */ + <0x00040000 0x00040000 0x001000>, /* ap 22 */ + <0x00041000 0x00041000 0x001000>, /* ap 23 */ + <0x00042000 0x00042000 0x001000>, /* ap 24 */ + <0x00043000 0x00043000 0x001000>, /* ap 25 */ + <0x00044000 0x00044000 0x001000>, /* ap 26 */ + <0x00045000 0x00045000 0x001000>, /* ap 27 */ + <0x00046000 0x00046000 0x001000>, /* ap 28 */ + <0x00047000 0x00047000 0x001000>, /* ap 29 */ + <0x00048000 0x00048000 0x001000>, /* ap 30 */ + <0x00049000 0x00049000 0x001000>, /* ap 31 */ + <0x0004c000 0x0004c000 0x001000>, /* ap 32 */ + <0x0004d000 0x0004d000 0x001000>, /* ap 33 */ + <0x00050000 0x00050000 0x002000>, /* ap 34 */ + <0x00052000 0x00052000 0x001000>, /* ap 35 */ + <0x00060000 0x00060000 0x001000>, /* ap 36 */ + <0x00061000 0x00061000 0x001000>, /* ap 37 */ + <0x00080000 0x00080000 0x010000>, /* ap 38 */ + <0x00090000 0x00090000 0x001000>, /* ap 39 */ + <0x000a0000 0x000a0000 0x010000>, /* ap 40 */ + <0x000b0000 0x000b0000 0x001000>, /* ap 41 */ + <0x00030000 0x00030000 0x001000>, /* ap 77 */ + <0x00031000 0x00031000 0x001000>, /* ap 78 */ + <0x0004a000 0x0004a000 0x001000>, /* ap 85 */ + <0x0004b000 0x0004b000 0x001000>, /* ap 86 */ + <0x000c8000 0x000c8000 0x001000>, /* ap 87 */ + <0x000c9000 0x000c9000 0x001000>, /* ap 88 */ + <0x000cc000 0x000cc000 0x001000>, /* ap 89 */ + <0x000cd000 0x000cd000 0x001000>, /* ap 90 */ + <0x000ca000 0x000ca000 0x001000>, /* ap 91 */ + <0x000cb000 0x000cb000 0x001000>, /* ap 92 */ + <0x46000000 0x46000000 0x400000>, /* l3 data port */ + <0x46400000 0x46400000 0x400000>; /* l3 data port */ + + target-module@8000 { /* 0x48008000, ap 6 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@14000 { /* 0x48014000, ap 18 58.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@16000 { /* 0x48016000, ap 8 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@22000 { /* 0x48022000, ap 10 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x22050 0x4>, + <0x22054 0x4>, + <0x22058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + uart1: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <73>; + status = "disabled"; + dmas = <&edma 28 0>, <&edma 29 0>; + dma-names = "tx", "rx"; + }; + }; + + target-module@24000 { /* 0x48024000, ap 12 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x24050 0x4>, + <0x24054 0x4>, + <0x24058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + uart2: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <74>; + status = "disabled"; + dmas = <&edma 30 0>, <&edma 31 0>; + dma-names = "tx", "rx"; + }; + }; + + target-module@2a000 { /* 0x4802a000, ap 14 2a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x2a000 0x8>, + <0x2a010 0x8>, + <0x2a090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1000>; + interrupts = <71>; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x48030000, ap 77 08.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi0"; + reg = <0x30000 0x4>, + <0x30110 0x4>, + <0x30114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_SPI0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>; + + spi0: spi@0 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x400>; + interrupts = <65>; + ti,spi-num-cs = <2>; + dmas = <&edma 16 0 + &edma 17 0 + &edma 18 0 + &edma 19 0>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + }; + + target-module@38000 { /* 0x48038000, ap 16 02.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "mcasp0"; + reg = <0x38000 0x4>, + <0x38004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM3_L3S_MCASP0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x2000>, + <0x46000000 0x46000000 0x400000>; + + mcasp0: mcasp@0 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <80>, <81>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 8 2>, + <&edma 9 2>; + dma-names = "tx", "rx"; + }; + }; + + target-module@3c000 { /* 0x4803c000, ap 20 32.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "mcasp1"; + reg = <0x3c000 0x4>, + <0x3c004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM3_L3S_MCASP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x2000>, + <0x46400000 0x46400000 0x400000>; + + mcasp1: mcasp@0 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <82>, <83>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 10 2>, + <&edma 11 2>; + dma-names = "tx", "rx"; + }; + }; + + target-module@40000 { /* 0x48040000, ap 22 1e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x40000 0x4>, + <0x40010 0x4>, + <0x40014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + timer2: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <68>; + clocks = <&timer2_fck>; + clock-names = "fck"; + }; + }; + + target-module@42000 { /* 0x48042000, ap 24 1c.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x42000 0x4>, + <0x42010 0x4>, + <0x42014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + + timer3: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <69>; + }; + }; + + target-module@44000 { /* 0x48044000, ap 26 26.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x44000 0x4>, + <0x44010 0x4>, + <0x44014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x44000 0x1000>; + + timer4: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <92>; + ti,timer-pwm; + }; + }; + + target-module@46000 { /* 0x48046000, ap 28 28.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x46000 0x4>, + <0x46010 0x4>, + <0x46014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + + timer5: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <93>; + ti,timer-pwm; + }; + }; + + target-module@48000 { /* 0x48048000, ap 30 22.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x48000 0x4>, + <0x48010 0x4>, + <0x48014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48000 0x1000>; + + timer6: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <94>; + ti,timer-pwm; + }; + }; + + target-module@4a000 { /* 0x4804a000, ap 85 60.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x4a000 0x4>, + <0x4a010 0x4>, + <0x4a014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4a000 0x1000>; + + timer7: timer@0 { + compatible = "ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <95>; + ti,timer-pwm; + }; + }; + + target-module@4c000 { /* 0x4804c000, ap 32 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x4c000 0x4>, + <0x4c010 0x4>, + <0x4c114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 0>, + <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 18>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x1000>; + interrupts = <98>; + }; + }; + + target-module@50000 { /* 0x48050000, ap 34 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x50000 0x2000>; + }; + + target-module@60000 { /* 0x48060000, ap 36 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x602fc 0x4>, + <0x60110 0x4>, + <0x60114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + ti,dual-volt; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <&edma_xbar 24 0 0 + &edma_xbar 25 0 0>; + dma-names = "tx", "rx"; + interrupts = <64>; + reg = <0x0 0x1000>; + status = "disabled"; + }; + }; + + target-module@80000 { /* 0x48080000, ap 38 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "elm"; + reg = <0x80000 0x4>, + <0x80010 0x4>, + <0x80014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0x2000>; + interrupts = <4>; + status = "disabled"; + }; + }; + + target-module@a0000 { /* 0x480a0000, ap 40 5e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x10000>; + }; + + target-module@c8000 { /* 0x480c8000, ap 87 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox"; + reg = <0xc8000 0x4>, + <0xc8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <77>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; + }; + }; + + target-module@ca000 { /* 0x480ca000, ap 91 40.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0xca000 0x4>, + <0xca010 0x4>, + <0xca014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xca000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + + target-module@cc000 { /* 0x480cc000, ap 89 0e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xcc000 0x1000>; + }; + }; + + segment@100000 { /* 0x48100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 42 */ + <0x0008d000 0x0018d000 0x001000>, /* ap 43 */ + <0x0008e000 0x0018e000 0x001000>, /* ap 44 */ + <0x0008f000 0x0018f000 0x001000>, /* ap 45 */ + <0x0009c000 0x0019c000 0x001000>, /* ap 46 */ + <0x0009d000 0x0019d000 0x001000>, /* ap 47 */ + <0x000a6000 0x001a6000 0x001000>, /* ap 48 */ + <0x000a7000 0x001a7000 0x001000>, /* ap 49 */ + <0x000a8000 0x001a8000 0x001000>, /* ap 50 */ + <0x000a9000 0x001a9000 0x001000>, /* ap 51 */ + <0x000aa000 0x001aa000 0x001000>, /* ap 52 */ + <0x000ab000 0x001ab000 0x001000>, /* ap 53 */ + <0x000ac000 0x001ac000 0x001000>, /* ap 54 */ + <0x000ad000 0x001ad000 0x001000>, /* ap 55 */ + <0x000ae000 0x001ae000 0x001000>, /* ap 56 */ + <0x000af000 0x001af000 0x001000>, /* ap 57 */ + <0x000b0000 0x001b0000 0x010000>, /* ap 58 */ + <0x000c0000 0x001c0000 0x001000>, /* ap 59 */ + <0x000cc000 0x001cc000 0x002000>, /* ap 60 */ + <0x000ce000 0x001ce000 0x002000>, /* ap 61 */ + <0x000d0000 0x001d0000 0x002000>, /* ap 62 */ + <0x000d2000 0x001d2000 0x002000>, /* ap 63 */ + <0x000d8000 0x001d8000 0x001000>, /* ap 64 */ + <0x000d9000 0x001d9000 0x001000>, /* ap 65 */ + <0x000a0000 0x001a0000 0x001000>, /* ap 79 */ + <0x000a1000 0x001a1000 0x001000>, /* ap 80 */ + <0x000a2000 0x001a2000 0x001000>, /* ap 81 */ + <0x000a3000 0x001a3000 0x001000>, /* ap 82 */ + <0x000a4000 0x001a4000 0x001000>, /* ap 83 */ + <0x000a5000 0x001a5000 0x001000>; /* ap 84 */ + + target-module@8c000 { /* 0x4818c000, ap 42 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8c000 0x1000>; + }; + + target-module@8e000 { /* 0x4818e000, ap 44 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8e000 0x1000>; + }; + + target-module@9c000 { /* 0x4819c000, ap 46 5a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x9c000 0x8>, + <0x9c010 0x8>, + <0x9c090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1000>; + interrupts = <30>; + status = "disabled"; + }; + }; + + target-module@a0000 { /* 0x481a0000, ap 79 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi1"; + reg = <0xa0000 0x4>, + <0xa0110 0x4>, + <0xa0114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_SPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x1000>; + + spi1: spi@0 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x400>; + interrupts = <125>; + ti,spi-num-cs = <2>; + dmas = <&edma 42 0 + &edma 43 0 + &edma 44 0 + &edma 45 0>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + }; + + target-module@a2000 { /* 0x481a2000, ap 81 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x481a4000, ap 83 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa4000 0x1000>; + }; + + target-module@a6000 { /* 0x481a6000, ap 48 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0xa6050 0x4>, + <0xa6054 0x4>, + <0xa6058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa6000 0x1000>; + + uart3: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <44>; + status = "disabled"; + }; + }; + + target-module@a8000 { /* 0x481a8000, ap 50 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart5"; + reg = <0xa8050 0x4>, + <0xa8054 0x4>, + <0xa8058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x1000>; + + uart4: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <45>; + status = "disabled"; + }; + }; + + target-module@aa000 { /* 0x481aa000, ap 52 1a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart6"; + reg = <0xaa050 0x4>, + <0xaa054 0x4>, + <0xaa058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_UART6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xaa000 0x1000>; + + uart5: serial@0 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + clock-frequency = <48000000>; + reg = <0x0 0x2000>; + interrupts = <46>; + status = "disabled"; + }; + }; + + target-module@ac000 { /* 0x481ac000, ap 54 38.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0xac000 0x4>, + <0xac010 0x4>, + <0xac114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 0>, + <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 18>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xac000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x1000>; + interrupts = <32>; + }; + }; + + target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0xae000 0x4>, + <0xae010 0x4>, + <0xae114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 0>, + <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 18>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xae000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x1000>; + interrupts = <62>; + }; + }; + + target-module@b0000 { /* 0x481b0000, ap 58 50.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb0000 0x10000>; + }; + + target-module@cc000 { /* 0x481cc000, ap 60 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "d_can0"; + reg = <0xcc000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_D_CAN0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xcc000 0x2000>; + + dcan0: can@0 { + compatible = "ti,am3352-d_can"; + reg = <0x0 0x2000>; + clocks = <&dcan0_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 0>; + interrupts = <52>; + status = "disabled"; + }; + }; + + target-module@d0000 { /* 0x481d0000, ap 62 42.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "d_can1"; + reg = <0xd0000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_D_CAN1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000 0x2000>; + + dcan1: can@0 { + compatible = "ti,am3352-d_can"; + reg = <0x0 0x2000>; + clocks = <&dcan1_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 1>; + interrupts = <55>; + status = "disabled"; + }; + }; + + target-module@d8000 { /* 0x481d8000, ap 64 66.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xd82fc 0x4>, + <0xd8110 0x4>, + <0xd8114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd8000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + ti,needs-special-reset; + dmas = <&edma 2 0 + &edma 3 0>; + dma-names = "tx", "rx"; + interrupts = <28>; + reg = <0x0 0x1000>; + status = "disabled"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@300000 { /* 0x48300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00300000 0x001000>, /* ap 66 */ + <0x00001000 0x00301000 0x001000>, /* ap 67 */ + <0x00002000 0x00302000 0x001000>, /* ap 68 */ + <0x00003000 0x00303000 0x001000>, /* ap 69 */ + <0x00004000 0x00304000 0x001000>, /* ap 70 */ + <0x00005000 0x00305000 0x001000>, /* ap 71 */ + <0x0000e000 0x0030e000 0x001000>, /* ap 72 */ + <0x0000f000 0x0030f000 0x001000>, /* ap 73 */ + <0x00018000 0x00318000 0x004000>, /* ap 74 */ + <0x0001c000 0x0031c000 0x001000>, /* ap 75 */ + <0x00010000 0x00310000 0x002000>, /* ap 76 */ + <0x00012000 0x00312000 0x001000>, /* ap 93 */ + <0x00015000 0x00315000 0x001000>, /* ap 94 */ + <0x00016000 0x00316000 0x001000>, /* ap 95 */ + <0x00017000 0x00317000 0x001000>, /* ap 96 */ + <0x00013000 0x00313000 0x001000>, /* ap 97 */ + <0x00014000 0x00314000 0x001000>, /* ap 98 */ + <0x00020000 0x00320000 0x001000>, /* ap 99 */ + <0x00021000 0x00321000 0x001000>, /* ap 100 */ + <0x00022000 0x00322000 0x001000>, /* ap 101 */ + <0x00023000 0x00323000 0x001000>, /* ap 102 */ + <0x00024000 0x00324000 0x001000>, /* ap 103 */ + <0x00025000 0x00325000 0x001000>; /* ap 104 */ + + target-module@0 { /* 0x48300000, ap 66 48.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss0"; + reg = <0x0 0x4>, + <0x4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + epwmss0: epwmss@0 { + compatible = "ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap0: ecap@100 { + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupts = <31>; + interrupt-names = "ecap0"; + status = "disabled"; + }; + + ehrpwm0: pwm@200 { + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@2000 { /* 0x48302000, ap 68 52.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss1"; + reg = <0x2000 0x4>, + <0x2004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + epwmss1: epwmss@0 { + compatible = "ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap1: ecap@100 { + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupts = <47>; + interrupt-names = "ecap1"; + status = "disabled"; + }; + + ehrpwm1: pwm@200 { + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@4000 { /* 0x48304000, ap 70 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss2"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + epwmss2: epwmss@0 { + compatible = "ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap2: ecap@100 { + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + interrupts = <61>; + interrupt-names = "ecap2"; + status = "disabled"; + }; + + ehrpwm2: pwm@200 { + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@e000 { /* 0x4830e000, ap 72 4a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "lcdc"; + reg = <0xe000 0x4>, + <0xe054 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle ; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, lcdc_clkdm */ + clocks = <&lcdc_clkctrl AM3_LCDC_LCDC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + + lcdc: lcdc@0 { + compatible = "ti,am33xx-tilcdc"; + reg = <0x0 0x1000>; + interrupts = <36>; + status = "disabled"; + }; + }; + + target-module@10000 { /* 0x48310000, ap 76 4e.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "rng"; + reg = <0x11fe0 0x4>, + <0x11fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM3_L4LS_RNG_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <111>; + }; + }; + + target-module@13000 { /* 0x48313000, ap 97 62.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x13000 0x1000>; + }; + + target-module@15000 { /* 0x48315000, ap 94 56.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00015000 0x00001000>, + <0x00001000 0x00016000 0x00001000>; + }; + + target-module@18000 { /* 0x48318000, ap 74 4c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x4000>; + }; + + target-module@20000 { /* 0x48320000, ap 99 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@22000 { /* 0x48322000, ap 101 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + }; + + target-module@24000 { /* 0x48324000, ap 103 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index d3dd6a16e70a..e5c2f71a7c77 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/am33xx.h> #include <dt-bindings/clock/am3.h> @@ -166,87 +167,23 @@ ranges; ti,hwmods = "l3_main"; - l4_wkup: l4_wkup@44c00000 { - compatible = "ti,am3-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x44c00000 0x280000>; - + l4_wkup: interconnect@44c00000 { wkup_m3: wkup_m3@100000 { compatible = "ti,am3352-wkup-m3"; reg = <0x100000 0x4000>, - <0x180000 0x2000>; + <0x180000 0x2000>; reg-names = "umem", "dmem"; ti,hwmods = "wkup_m3"; ti,pm-firmware = "am335x-pm-firmware.elf"; }; - - prcm: prcm@200000 { - compatible = "ti,am3-prcm", "simple-bus"; - reg = <0x200000 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x200000 0x4000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prcm_clockdomains: clockdomains { - }; - }; - - scm: scm@210000 { - compatible = "ti,am3-scm", "simple-bus"; - reg = <0x210000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - #pinctrl-cells = <1>; - ranges = <0 0x210000 0x2000>; - - am33xx_pinmux: pinmux@800 { - compatible = "pinctrl-single"; - reg = <0x800 0x238>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x7f>; - }; - - scm_conf: scm_conf@0 { - compatible = "syscon", "simple-bus"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0x800>; - - scm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - wkup_m3_ipc: wkup_m3_ipc@1324 { - compatible = "ti,am3352-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&mailbox &mbox_wkupm3>; - }; - - edma_xbar: dma-router@f90 { - compatible = "ti,am335x-edma-crossbar"; - reg = <0xf90 0x40>; - #dma-cells = <3>; - dma-requests = <32>; - dma-masters = <&edma>; - }; - - scm_clockdomains: clockdomains { - }; - }; + }; + l4_per: interconnect@48000000 { + }; + l4_fw: interconnect@47c00000 { + }; + l4_fast: interconnect@4a000000 { + }; + l4_mpuss: interconnect@4b140000 { }; intc: interrupt-controller@48200000 { @@ -297,166 +234,6 @@ interrupt-names = "edma3_tcerrint"; }; - gpio0: gpio@44e07000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio1"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x44e07000 0x1000>; - interrupts = <96>; - }; - - gpio1: gpio@4804c000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4804c000 0x1000>; - interrupts = <98>; - }; - - gpio2: gpio@481ac000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x481ac000 0x1000>; - interrupts = <32>; - }; - - gpio3: gpio@481ae000 { - compatible = "ti,omap4-gpio"; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x481ae000 0x1000>; - interrupts = <62>; - }; - - uart0: serial@44e09000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - reg = <0x44e09000 0x2000>; - interrupts = <72>; - status = "disabled"; - dmas = <&edma 26 0>, <&edma 27 0>; - dma-names = "tx", "rx"; - }; - - uart1: serial@48022000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - reg = <0x48022000 0x2000>; - interrupts = <73>; - status = "disabled"; - dmas = <&edma 28 0>, <&edma 29 0>; - dma-names = "tx", "rx"; - }; - - uart2: serial@48024000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - reg = <0x48024000 0x2000>; - interrupts = <74>; - status = "disabled"; - dmas = <&edma 30 0>, <&edma 31 0>; - dma-names = "tx", "rx"; - }; - - uart3: serial@481a6000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - reg = <0x481a6000 0x2000>; - interrupts = <44>; - status = "disabled"; - }; - - uart4: serial@481a8000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart5"; - clock-frequency = <48000000>; - reg = <0x481a8000 0x2000>; - interrupts = <45>; - status = "disabled"; - }; - - uart5: serial@481aa000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart6"; - clock-frequency = <48000000>; - reg = <0x481aa000 0x2000>; - interrupts = <46>; - status = "disabled"; - }; - - i2c0: i2c@44e0b000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - reg = <0x44e0b000 0x1000>; - interrupts = <70>; - status = "disabled"; - }; - - i2c1: i2c@4802a000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - reg = <0x4802a000 0x1000>; - interrupts = <71>; - status = "disabled"; - }; - - i2c2: i2c@4819c000 { - compatible = "ti,omap4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - reg = <0x4819c000 0x1000>; - interrupts = <30>; - status = "disabled"; - }; - - mmc1: mmc@48060000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - ti,needs-special-hs-handling; - dmas = <&edma_xbar 24 0 0 - &edma_xbar 25 0 0>; - dma-names = "tx", "rx"; - interrupts = <64>; - reg = <0x48060000 0x1000>; - status = "disabled"; - }; - - mmc2: mmc@481d8000 { - compatible = "ti,omap4-hsmmc"; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&edma 2 0 - &edma 3 0>; - dma-names = "tx", "rx"; - interrupts = <28>; - reg = <0x481d8000 0x1000>; - status = "disabled"; - }; - mmc3: mmc@47810000 { compatible = "ti,omap4-hsmmc"; ti,hwmods = "mmc3"; @@ -466,157 +243,6 @@ status = "disabled"; }; - hwspinlock: spinlock@480ca000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x480ca000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - wdt2: wdt@44e35000 { - compatible = "ti,omap3-wdt"; - ti,hwmods = "wd_timer2"; - reg = <0x44e35000 0x1000>; - interrupts = <91>; - }; - - dcan0: can@481cc000 { - compatible = "ti,am3352-d_can"; - ti,hwmods = "d_can0"; - reg = <0x481cc000 0x2000>; - clocks = <&dcan0_fck>; - clock-names = "fck"; - syscon-raminit = <&scm_conf 0x644 0>; - interrupts = <52>; - status = "disabled"; - }; - - dcan1: can@481d0000 { - compatible = "ti,am3352-d_can"; - ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000>; - clocks = <&dcan1_fck>; - clock-names = "fck"; - syscon-raminit = <&scm_conf 0x644 1>; - interrupts = <55>; - status = "disabled"; - }; - - mailbox: mailbox@480c8000 { - compatible = "ti,omap4-mailbox"; - reg = <0x480C8000 0x200>; - interrupts = <77>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <8>; - mbox_wkupm3: wkup_m3 { - ti,mbox-send-noirq; - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <0 0 3>; - }; - }; - - timer1: timer@44e31000 { - compatible = "ti,am335x-timer-1ms"; - reg = <0x44e31000 0x400>; - interrupts = <67>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&timer1_fck>; - clock-names = "fck"; - }; - - timer2: timer@48040000 { - compatible = "ti,am335x-timer"; - reg = <0x48040000 0x400>; - interrupts = <68>; - ti,hwmods = "timer2"; - clocks = <&timer2_fck>; - clock-names = "fck"; - }; - - timer3: timer@48042000 { - compatible = "ti,am335x-timer"; - reg = <0x48042000 0x400>; - interrupts = <69>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48044000 { - compatible = "ti,am335x-timer"; - reg = <0x48044000 0x400>; - interrupts = <92>; - ti,hwmods = "timer4"; - ti,timer-pwm; - }; - - timer5: timer@48046000 { - compatible = "ti,am335x-timer"; - reg = <0x48046000 0x400>; - interrupts = <93>; - ti,hwmods = "timer5"; - ti,timer-pwm; - }; - - timer6: timer@48048000 { - compatible = "ti,am335x-timer"; - reg = <0x48048000 0x400>; - interrupts = <94>; - ti,hwmods = "timer6"; - ti,timer-pwm; - }; - - timer7: timer@4804a000 { - compatible = "ti,am335x-timer"; - reg = <0x4804a000 0x400>; - interrupts = <95>; - ti,hwmods = "timer7"; - ti,timer-pwm; - }; - - rtc: rtc@44e3e000 { - compatible = "ti,am3352-rtc", "ti,da830-rtc"; - reg = <0x44e3e000 0x1000>; - interrupts = <75 - 76>; - ti,hwmods = "rtc"; - clocks = <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; - clock-names = "int-clk"; - }; - - spi0: spi@48030000 { - compatible = "ti,omap4-mcspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x48030000 0x400>; - interrupts = <65>; - ti,spi-num-cs = <2>; - ti,hwmods = "spi0"; - dmas = <&edma 16 0 - &edma 17 0 - &edma 18 0 - &edma 19 0>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - status = "disabled"; - }; - - spi1: spi@481a0000 { - compatible = "ti,omap4-mcspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x481a0000 0x400>; - interrupts = <125>; - ti,spi-num-cs = <2>; - ti,hwmods = "spi1"; - dmas = <&edma 42 0 - &edma 43 0 - &edma 44 0 - &edma 45 0>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - status = "disabled"; - }; - usb: usb@47400000 { compatible = "ti,am33xx-usb"; reg = <0x47400000 0x1000>; @@ -747,163 +373,6 @@ }; }; - epwmss0: epwmss@48300000 { - compatible = "ti,am33xx-pwmss"; - reg = <0x48300000 0x10>; - ti,hwmods = "epwmss0"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges = <0x48300100 0x48300100 0x80 /* ECAP */ - 0x48300180 0x48300180 0x80 /* EQEP */ - 0x48300200 0x48300200 0x80>; /* EHRPWM */ - - ecap0: ecap@48300100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48300100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - interrupts = <31>; - interrupt-names = "ecap0"; - status = "disabled"; - }; - - ehrpwm0: pwm@48300200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48300200 0x80>; - clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss1: epwmss@48302000 { - compatible = "ti,am33xx-pwmss"; - reg = <0x48302000 0x10>; - ti,hwmods = "epwmss1"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges = <0x48302100 0x48302100 0x80 /* ECAP */ - 0x48302180 0x48302180 0x80 /* EQEP */ - 0x48302200 0x48302200 0x80>; /* EHRPWM */ - - ecap1: ecap@48302100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48302100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - interrupts = <47>; - interrupt-names = "ecap1"; - status = "disabled"; - }; - - ehrpwm1: pwm@48302200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48302200 0x80>; - clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss2: epwmss@48304000 { - compatible = "ti,am33xx-pwmss"; - reg = <0x48304000 0x10>; - ti,hwmods = "epwmss2"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges = <0x48304100 0x48304100 0x80 /* ECAP */ - 0x48304180 0x48304180 0x80 /* EQEP */ - 0x48304200 0x48304200 0x80>; /* EHRPWM */ - - ecap2: ecap@48304100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48304100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - interrupts = <61>; - interrupt-names = "ecap2"; - status = "disabled"; - }; - - ehrpwm2: pwm@48304200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48304200 0x80>; - clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - mac: ethernet@4a100000 { - compatible = "ti,am335x-cpsw","ti,cpsw"; - ti,hwmods = "cpgmac0"; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; - clock-names = "fck", "cpts"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x80000000>; - cpts_clock_shift = <29>; - reg = <0x4a100000 0x800 - 0x4a101200 0x100>; - #address-cells = <1>; - #size-cells = <1>; - /* - * c0_rx_thresh_pend - * c0_rx_pend - * c0_tx_pend - * c0_misc_pend - */ - interrupts = <40 41 42 43>; - ranges; - syscon = <&scm_conf>; - status = "disabled"; - - davinci_mdio: mdio@4a101000 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - reg = <0x4a101000 0x100>; - status = "disabled"; - }; - - cpsw_emac0: slave@4a100200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - cpsw_emac1: slave@4a100300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@44e10650 { - compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x44e10650 0x4>; - reg-names = "gmii-sel"; - }; - }; - ocmcram: ocmcram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x10000>; /* 64k */ @@ -924,40 +393,6 @@ }; }; - elm: elm@48080000 { - compatible = "ti,am3352-elm"; - reg = <0x48080000 0x2000>; - interrupts = <4>; - ti,hwmods = "elm"; - status = "disabled"; - }; - - lcdc: lcdc@4830e000 { - compatible = "ti,am33xx-tilcdc"; - reg = <0x4830e000 0x1000>; - interrupts = <36>; - ti,hwmods = "lcdc"; - status = "disabled"; - }; - - tscadc: tscadc@44e0d000 { - compatible = "ti,am3359-tscadc"; - reg = <0x44e0d000 0x1000>; - interrupts = <16>; - ti,hwmods = "adc_tsc"; - status = "disabled"; - dmas = <&edma 53 0>, <&edma 57 0>; - dma-names = "fifo0", "fifo1"; - - tsc { - compatible = "ti,am3359-tsc"; - }; - am335x_adc: adc { - #io-channel-cells = <1>; - compatible = "ti,am3359-adc"; - }; - }; - emif: emif@4c000000 { compatible = "ti,emif-am3352"; reg = <0x4c000000 0x1000000>; @@ -1005,42 +440,8 @@ <&edma 5 0>; dma-names = "tx", "rx"; }; - - mcasp0: mcasp@48038000 { - compatible = "ti,am33xx-mcasp-audio"; - ti,hwmods = "mcasp0"; - reg = <0x48038000 0x2000>, - <0x46000000 0x400000>; - reg-names = "mpu", "dat"; - interrupts = <80>, <81>; - interrupt-names = "tx", "rx"; - status = "disabled"; - dmas = <&edma 8 2>, - <&edma 9 2>; - dma-names = "tx", "rx"; - }; - - mcasp1: mcasp@4803c000 { - compatible = "ti,am33xx-mcasp-audio"; - ti,hwmods = "mcasp1"; - reg = <0x4803C000 0x2000>, - <0x46400000 0x400000>; - reg-names = "mpu", "dat"; - interrupts = <82>, <83>; - interrupt-names = "tx", "rx"; - status = "disabled"; - dmas = <&edma 10 2>, - <&edma 11 2>; - dma-names = "tx", "rx"; - }; - - rng: rng@48310000 { - compatible = "ti,omap4-rng"; - ti,hwmods = "rng"; - reg = <0x48310000 0x2000>; - interrupts = <111>; - }; }; }; +#include "am33xx-l4.dtsi" #include "am33xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 1e2bb68231ad..3527c0f2dfff 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -20,6 +20,10 @@ display0 = &lcd0; }; + chosen { + stdout-path = &uart3; + }; + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index a68e89dae7a1..55aff4db9c7c 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/am4.h> @@ -159,12 +160,7 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_wkup: l4_wkup@44c00000 { - compatible = "ti,am4-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x44c00000 0x287000>; - + l4_wkup: interconnect@44c00000 { wkup_m3: wkup_m3@100000 { compatible = "ti,am4372-wkup-m3"; reg = <0x100000 0x4000>, @@ -173,75 +169,10 @@ ti,hwmods = "wkup_m3"; ti,pm-firmware = "am335x-pm-firmware.elf"; }; - - prcm: prcm@1f0000 { - compatible = "ti,am4-prcm", "simple-bus"; - reg = <0x1f0000 0x11000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1f0000 0x11000>; - - prcm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prcm_clockdomains: clockdomains { - }; - }; - - scm: scm@210000 { - compatible = "ti,am4-scm", "simple-bus"; - reg = <0x210000 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x210000 0x4000>; - - am43xx_pinmux: pinmux@800 { - compatible = "ti,am437-padconf", - "pinctrl-single"; - reg = <0x800 0x31c>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - - scm_conf: scm_conf@0 { - compatible = "syscon"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - - scm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - wkup_m3_ipc: wkup_m3_ipc@1324 { - compatible = "ti,am4372-wkup-m3-ipc"; - reg = <0x1324 0x44>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,rproc = <&wkup_m3>; - mboxes = <&mailbox &mbox_wkupm3>; - }; - - edma_xbar: dma-router@f90 { - compatible = "ti,am335x-edma-crossbar"; - reg = <0xf90 0x40>; - #dma-cells = <3>; - dma-requests = <64>; - dma-masters = <&edma>; - }; - - scm_clockdomains: clockdomains { - }; - }; + }; + l4_per: interconnect@48000000 { + }; + l4_fast: interconnect@4a000000 { }; emif: emif@4c000000 { @@ -297,333 +228,6 @@ interrupt-names = "edma3_tcerrint"; }; - uart0: serial@44e09000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x44e09000 0x2000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - }; - - uart1: serial@48022000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x48022000 0x2000>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - status = "disabled"; - }; - - uart2: serial@48024000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x48024000 0x2000>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - status = "disabled"; - }; - - uart3: serial@481a6000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x481a6000 0x2000>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - status = "disabled"; - }; - - uart4: serial@481a8000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x481a8000 0x2000>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart5"; - status = "disabled"; - }; - - uart5: serial@481aa000 { - compatible = "ti,am4372-uart","ti,omap2-uart"; - reg = <0x481aa000 0x2000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart6"; - status = "disabled"; - }; - - mailbox: mailbox@480c8000 { - compatible = "ti,omap4-mailbox"; - reg = <0x480C8000 0x200>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <8>; - mbox_wkupm3: wkup_m3 { - ti,mbox-send-noirq; - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <0 0 3>; - }; - }; - - timer1: timer@44e31000 { - compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms"; - reg = <0x44e31000 0x400>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-alwon; - ti,hwmods = "timer1"; - clocks = <&timer1_fck>; - clock-names = "fck"; - }; - - timer2: timer@48040000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48040000 0x400>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - clocks = <&timer2_fck>; - clock-names = "fck"; - }; - - timer3: timer@48042000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48042000 0x400>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - status = "disabled"; - }; - - timer4: timer@48044000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48044000 0x400>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-pwm; - ti,hwmods = "timer4"; - status = "disabled"; - }; - - timer5: timer@48046000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48046000 0x400>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-pwm; - ti,hwmods = "timer5"; - status = "disabled"; - }; - - timer6: timer@48048000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48048000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-pwm; - ti,hwmods = "timer6"; - status = "disabled"; - }; - - timer7: timer@4804a000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x4804a000 0x400>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - ti,timer-pwm; - ti,hwmods = "timer7"; - status = "disabled"; - }; - - timer8: timer@481c1000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x481c1000 0x400>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer8"; - status = "disabled"; - }; - - timer9: timer@4833d000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x4833d000 0x400>; - interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - status = "disabled"; - }; - - timer10: timer@4833f000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x4833f000 0x400>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - status = "disabled"; - }; - - timer11: timer@48341000 { - compatible = "ti,am4372-timer","ti,am335x-timer"; - reg = <0x48341000 0x400>; - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - status = "disabled"; - }; - - counter32k: counter@44e86000 { - compatible = "ti,am4372-counter32k","ti,omap-counter32k"; - reg = <0x44e86000 0x40>; - ti,hwmods = "counter_32k"; - }; - - rtc: rtc@44e3e000 { - compatible = "ti,am4372-rtc", "ti,am3352-rtc", - "ti,da830-rtc"; - reg = <0x44e3e000 0x1000>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "rtc"; - clocks = <&clk_32768_ck>; - clock-names = "int-clk"; - system-power-controller; - status = "disabled"; - }; - - wdt: wdt@44e35000 { - compatible = "ti,am4372-wdt","ti,omap3-wdt"; - reg = <0x44e35000 0x1000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - - gpio0: gpio@44e07000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x44e07000 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio1"; - status = "disabled"; - }; - - gpio1: gpio@4804c000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x4804c000 0x1000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio2"; - status = "disabled"; - }; - - gpio2: gpio@481ac000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x481ac000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio3"; - status = "disabled"; - }; - - gpio3: gpio@481ae000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x481ae000 0x1000>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio4"; - status = "disabled"; - }; - - gpio4: gpio@48320000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x48320000 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio5"; - status = "disabled"; - }; - - gpio5: gpio@48322000 { - compatible = "ti,am4372-gpio","ti,omap4-gpio"; - reg = <0x48322000 0x1000>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - ti,hwmods = "gpio6"; - status = "disabled"; - }; - - hwspinlock: spinlock@480ca000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x480ca000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - i2c0: i2c@44e0b000 { - compatible = "ti,am4372-i2c","ti,omap4-i2c"; - reg = <0x44e0b000 0x1000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "i2c1"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@4802a000 { - compatible = "ti,am4372-i2c","ti,omap4-i2c"; - reg = <0x4802a000 0x1000>; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "i2c2"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@4819c000 { - compatible = "ti,am4372-i2c","ti,omap4-i2c"; - reg = <0x4819c000 0x1000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "i2c3"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi0: spi@48030000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x48030000 0x400>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi0"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mmc1: mmc@48060000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x48060000 0x1000>; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&edma 24 0>, - <&edma 25 0>; - dma-names = "tx", "rx"; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - mmc2: mmc@481d8000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x481d8000 0x1000>; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&edma 2 0>, - <&edma 3 0>; - dma-names = "tx", "rx"; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - mmc3: mmc@47810000 { compatible = "ti,omap4-hsmmc"; reg = <0x47810000 0x1000>; @@ -633,282 +237,6 @@ status = "disabled"; }; - spi1: spi@481a0000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x481a0000 0x400>; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi1"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@481a2000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x481a2000 0x400>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi2"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi3: spi@481a4000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x481a4000 0x400>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi3"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi4: spi@48345000 { - compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; - reg = <0x48345000 0x400>; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "spi4"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mac: ethernet@4a100000 { - compatible = "ti,am4372-cpsw","ti,cpsw"; - reg = <0x4a100000 0x800 - 0x4a101200 0x100>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ti,hwmods = "cpgmac0"; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>, - <&dpll_clksel_mac_clk>; - clock-names = "fck", "cpts", "50mclk"; - assigned-clocks = <&dpll_clksel_mac_clk>; - assigned-clock-rates = <50000000>; - status = "disabled"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x80000000>; - cpts_clock_shift = <29>; - ranges; - syscon = <&scm_conf>; - - davinci_mdio: mdio@4a101000 { - compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x4a101000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - status = "disabled"; - }; - - cpsw_emac0: slave@4a100200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - cpsw_emac1: slave@4a100300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@44e10650 { - compatible = "ti,am43xx-cpsw-phy-sel"; - reg= <0x44e10650 0x4>; - reg-names = "gmii-sel"; - }; - }; - - epwmss0: epwmss@48300000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48300000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss0"; - status = "disabled"; - - ecap0: ecap@48300100 { - compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48300100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - status = "disabled"; - }; - - ehrpwm0: pwm@48300200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48300200 0x80>; - clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss1: epwmss@48302000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48302000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss1"; - status = "disabled"; - - ecap1: ecap@48302100 { - compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48302100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - status = "disabled"; - }; - - ehrpwm1: pwm@48302200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48302200 0x80>; - clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss2: epwmss@48304000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48304000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss2"; - status = "disabled"; - - ecap2: ecap@48304100 { - compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; - #pwm-cells = <3>; - reg = <0x48304100 0x80>; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - status = "disabled"; - }; - - ehrpwm2: pwm@48304200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48304200 0x80>; - clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss3: epwmss@48306000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48306000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss3"; - status = "disabled"; - - ehrpwm3: pwm@48306200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48306200 0x80>; - clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss4: epwmss@48308000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x48308000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss4"; - status = "disabled"; - - ehrpwm4: pwm@48308200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48308200 0x80>; - clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - epwmss5: epwmss@4830a000 { - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; - reg = <0x4830a000 0x10>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "epwmss5"; - status = "disabled"; - - ehrpwm5: pwm@4830a200 { - compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; - #pwm-cells = <3>; - reg = <0x4830a200 0x80>; - clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - }; - - tscadc: tscadc@44e0d000 { - compatible = "ti,am3359-tscadc"; - reg = <0x44e0d000 0x1000>; - ti,hwmods = "adc_tsc"; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&adc_tsc_fck>; - clock-names = "fck"; - status = "disabled"; - dmas = <&edma 53 0>, <&edma 57 0>; - dma-names = "fifo0", "fifo1"; - - tsc { - compatible = "ti,am3359-tsc"; - }; - - adc { - #io-channel-cells = <1>; - compatible = "ti,am3359-adc"; - }; - - }; - sham: sham@53100000 { compatible = "ti,omap5-sham"; ti,hwmods = "sham"; @@ -938,53 +266,6 @@ dma-names = "tx", "rx"; }; - rng: rng@48310000 { - compatible = "ti,omap4-rng"; - ti,hwmods = "rng"; - reg = <0x48310000 0x2000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - }; - - mcasp0: mcasp@48038000 { - compatible = "ti,am33xx-mcasp-audio"; - ti,hwmods = "mcasp0"; - reg = <0x48038000 0x2000>, - <0x46000000 0x400000>; - reg-names = "mpu", "dat"; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - status = "disabled"; - dmas = <&edma 8 2>, - <&edma 9 2>; - dma-names = "tx", "rx"; - }; - - mcasp1: mcasp@4803c000 { - compatible = "ti,am33xx-mcasp-audio"; - ti,hwmods = "mcasp1"; - reg = <0x4803C000 0x2000>, - <0x46400000 0x400000>; - reg-names = "mpu", "dat"; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - status = "disabled"; - dmas = <&edma 10 2>, - <&edma 11 2>; - dma-names = "tx", "rx"; - }; - - elm: elm@48080000 { - compatible = "ti,am3352-elm"; - reg = <0x48080000 0x2000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "elm"; - clocks = <&l4ls_gclk>; - clock-names = "fck"; - status = "disabled"; - }; - gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; @@ -1005,102 +286,6 @@ status = "disabled"; }; - ocp2scp0: ocp2scp@483a8000 { - compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "ocp2scp0"; - - usb2_phy1: phy@483a8000 { - compatible = "ti,am437x-usb2"; - reg = <0x483a8000 0x8000>; - syscon-phy-power = <&scm_conf 0x620>; - clocks = <&usb_phy0_always_on_clk32k>, - <&l4_per_clkctrl AM4_USB_OTG_SS0_CLKCTRL 8>; - clock-names = "wkupclk", "refclk"; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - ocp2scp1: ocp2scp@483e8000 { - compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "ocp2scp1"; - - usb2_phy2: phy@483e8000 { - compatible = "ti,am437x-usb2"; - reg = <0x483e8000 0x8000>; - syscon-phy-power = <&scm_conf 0x628>; - clocks = <&usb_phy1_always_on_clk32k>, - <&l4_per_clkctrl AM4_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", "refclk"; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - dwc3_1: omap_dwc3@48380000 { - compatible = "ti,am437x-dwc3"; - ti,hwmods = "usb_otg_ss0"; - reg = <0x48380000 0x10000>; - interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <1>; - ranges; - - usb1: usb@48390000 { - compatible = "synopsys,dwc3"; - reg = <0x48390000 0x10000>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy1>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - status = "disabled"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - }; - }; - - dwc3_2: omap_dwc3@483c0000 { - compatible = "ti,am437x-dwc3"; - ti,hwmods = "usb_otg_ss1"; - reg = <0x483c0000 0x10000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <1>; - ranges; - - usb2: usb@483d0000 { - compatible = "synopsys,dwc3"; - reg = <0x483d0000 0x10000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy2>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - status = "disabled"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - }; - }; - qspi: spi@47900000 { compatible = "ti,am4372-qspi"; reg = <0x47900000 0x100>, @@ -1114,16 +299,6 @@ status = "disabled"; }; - hdq: hdq@48347000 { - compatible = "ti,am4372-hdq"; - reg = <0x48347000 0x1000>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&func_12m_clk>; - clock-names = "fck"; - ti,hwmods = "hdq1w"; - status = "disabled"; - }; - dss: dss@4832a000 { compatible = "ti,omap3-dss"; reg = <0x4832a000 0x200>; @@ -1173,45 +348,8 @@ pool; }; }; - - dcan0: can@481cc000 { - compatible = "ti,am4372-d_can", "ti,am3352-d_can"; - ti,hwmods = "d_can0"; - clocks = <&dcan0_fck>; - clock-names = "fck"; - reg = <0x481cc000 0x2000>; - syscon-raminit = <&scm_conf 0x644 0>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - dcan1: can@481d0000 { - compatible = "ti,am4372-d_can", "ti,am3352-d_can"; - ti,hwmods = "d_can1"; - clocks = <&dcan1_fck>; - clock-names = "fck"; - reg = <0x481d0000 0x2000>; - syscon-raminit = <&scm_conf 0x644 1>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - vpfe0: vpfe@48326000 { - compatible = "ti,am437x-vpfe"; - reg = <0x48326000 0x2000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "vpfe0"; - status = "disabled"; - }; - - vpfe1: vpfe@48328000 { - compatible = "ti,am437x-vpfe"; - reg = <0x48328000 0x2000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "vpfe1"; - status = "disabled"; - }; }; }; +#include "am437x-l4.dtsi" #include "am43xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 601bf4daaeb7..f4a20cade808 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -67,7 +67,13 @@ debounce-delay-ms = <5>; col-scan-delay-us = <2>; - row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&matrix_keypad_default>; + pinctrl-1 = <&matrix_keypad_sleep>; + + linux,wakeup; + + row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */ @@ -155,16 +161,23 @@ beeper: beeper { compatible = "gpio-beeper"; pinctrl-names = "default"; - pinctrl-0 = <&beeper_pins>; + pinctrl-0 = <&beeper_pins_default>; + pinctrl-1 = <&beeper_pins_sleep>; gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; }; }; &am43xx_pinmux { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&wlan_pins_default>; + pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>; pinctrl-1 = <&wlan_pins_sleep>; + ddr3_vtt_toggle_default: ddr_vtt_toggle_default { + pinctrl-single,pins = < + 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */ + >; + }; + i2c0_pins: i2c0_pins { pinctrl-single,pins = < AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ @@ -511,27 +524,121 @@ >; }; + beeper_pins_default: beeper_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */ + >; + }; + + beeper_pins_sleep: beeper_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* cam1_field.gpio4_12 */ + >; + }; + + unused_pins: unused_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7) + AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7) + AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7) + AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE) + AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + debugss_pins: pinmux_debugss_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN) + AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN) + >; + }; + uart0_pins_default: uart0_pins_default { pinctrl-single,pins = < - AM4372_IOPAD(0x968, PIN_INPUT | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ - AM4372_IOPAD(0x96C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ - AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; - beeper_pins: beeper_pins { + uart0_pins_sleep: uart0_pins_sleep { pinctrl-single,pins = < - AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */ + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */ + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */ + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + matrix_keypad_default: matrix_keypad_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) + AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7) + AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) + AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) >; }; + matrix_keypad_sleep: matrix_keypad_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7) + AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7) + AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) + AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; }; &uart0 { status = "okay"; - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_pins_default>; + pinctrl-1 = <&uart0_pins_sleep>; }; &i2c0 { diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi new file mode 100644 index 000000000000..ca0896f80248 --- /dev/null +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -0,0 +1,2505 @@ +&l4_wkup { /* 0x44c00000 */ + compatible = "ti,am4-l4-wkup", "simple-bus"; + reg = <0x44c00000 0x800>, + <0x44c00800 0x800>, + <0x44c01000 0x400>, + <0x44c01400 0x400>; + reg-names = "ap", "la", "ia0", "ia1"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */ + <0x00100000 0x44d00000 0x100000>, /* segment 1 */ + <0x00200000 0x44e00000 0x100000>; /* segment 2 */ + + segment@0 { /* 0x44c00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>; /* ap 3 */ + }; + + segment@100000 { /* 0x44d00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */ + <0x00004000 0x00104000 0x001000>, /* ap 5 */ + <0x00080000 0x00180000 0x002000>, /* ap 6 */ + <0x00082000 0x00182000 0x001000>, /* ap 7 */ + <0x000f0000 0x001f0000 0x010000>; /* ap 8 */ + + target-module@0 { /* 0x44d00000, ap 4 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4000>; + }; + + target-module@80000 { /* 0x44d80000, ap 6 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x2000>; + }; + + target-module@f0000 { /* 0x44df0000, ap 8 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xf0000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0000 0x10000>; + + prcm: prcm@0 { + compatible = "ti,am4-prcm", "simple-bus"; + reg = <0x0 0x11000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + }; + }; + + segment@200000 { /* 0x44e00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00200000 0x001000>, /* ap 9 */ + <0x00003000 0x00203000 0x001000>, /* ap 10 */ + <0x00004000 0x00204000 0x001000>, /* ap 11 */ + <0x00005000 0x00205000 0x001000>, /* ap 12 */ + <0x00006000 0x00206000 0x001000>, /* ap 13 */ + <0x00007000 0x00207000 0x001000>, /* ap 14 */ + <0x00008000 0x00208000 0x001000>, /* ap 15 */ + <0x00009000 0x00209000 0x001000>, /* ap 16 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 17 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 18 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 20 */ + <0x0000f000 0x0020f000 0x001000>, /* ap 21 */ + <0x00010000 0x00210000 0x010000>, /* ap 22 */ + <0x00030000 0x00230000 0x001000>, /* ap 23 */ + <0x00031000 0x00231000 0x001000>, /* ap 24 */ + <0x00032000 0x00232000 0x001000>, /* ap 25 */ + <0x00033000 0x00233000 0x001000>, /* ap 26 */ + <0x00034000 0x00234000 0x001000>, /* ap 27 */ + <0x00035000 0x00235000 0x001000>, /* ap 28 */ + <0x00036000 0x00236000 0x001000>, /* ap 29 */ + <0x00037000 0x00237000 0x001000>, /* ap 30 */ + <0x00038000 0x00238000 0x001000>, /* ap 31 */ + <0x00039000 0x00239000 0x001000>, /* ap 32 */ + <0x0003a000 0x0023a000 0x001000>, /* ap 33 */ + <0x0003e000 0x0023e000 0x001000>, /* ap 34 */ + <0x0003f000 0x0023f000 0x001000>, /* ap 35 */ + <0x00040000 0x00240000 0x040000>, /* ap 36 */ + <0x00080000 0x00280000 0x001000>, /* ap 37 */ + <0x00088000 0x00288000 0x008000>, /* ap 38 */ + <0x00092000 0x00292000 0x001000>, /* ap 39 */ + <0x00086000 0x00286000 0x001000>, /* ap 40 */ + <0x00087000 0x00287000 0x001000>, /* ap 41 */ + <0x00090000 0x00290000 0x001000>, /* ap 42 */ + <0x00091000 0x00291000 0x001000>; /* ap 43 */ + + target-module@3000 { /* 0x44e03000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3000 0x1000>; + }; + + target-module@5000 { /* 0x44e05000, ap 12 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5000 0x1000>; + }; + + target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x7000 0x4>, + <0x7010 0x4>, + <0x7114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 0>, + <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x1000>; + + gpio0: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@9000 { /* 0x44e09000, ap 16 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x9050 0x4>, + <0x9054 0x4>, + <0x9058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9000 0x1000>; + + uart0: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@b000 { /* 0x44e0b000, ap 18 48.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0xb000 0x8>, + <0xb010 0x8>, + <0xb090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb000 0x1000>; + + i2c0: i2c@0 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@d000 { /* 0x44e0d000, ap 20 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "adc_tsc"; + reg = <0xd000 0x4>, + <0xd010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkup_pwrdm, l3s_tsc_clkdm */ + clocks = <&l3s_tsc_clkctrl AM4_L3S_TSC_ADC_TSC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd000 0x1000>; + + tscadc: tscadc@0 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&adc_tsc_fck>; + clock-names = "fck"; + status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; + + tsc { + compatible = "ti,am3359-tsc"; + }; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + + }; + }; + + target-module@10000 { /* 0x44e10000, ap 22 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x10000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x10000>; + + scm: scm@0 { + compatible = "ti,am4-scm", "simple-bus"; + reg = <0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x4000>; + + phy_sel: cpsw-phy-sel@650 { + compatible = "ti,am43xx-cpsw-phy-sel"; + reg= <0x650 0x4>; + reg-names = "gmii-sel"; + }; + + am43xx_pinmux: pinmux@800 { + compatible = "ti,am437-padconf", + "pinctrl-single"; + reg = <0x800 0x31c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x44>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + + edma_xbar: dma-router@f90 { + compatible = "ti,am335x-edma-crossbar"; + reg = <0xf90 0x40>; + #dma-cells = <3>; + dma-requests = <64>; + dma-masters = <&edma>; + }; + + scm_clockdomains: clockdomains { + }; + }; + }; + + target-module@31000 { /* 0x44e31000, ap 24 40.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x31000 0x4>, + <0x31010 0x4>, + <0x31014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x31000 0x1000>; + + timer1: timer@0 { + compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; + }; + }; + + target-module@33000 { /* 0x44e33000, ap 26 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x33000 0x1000>; + }; + + target-module@35000 { /* 0x44e35000, ap 28 50.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x35000 0x4>, + <0x35010 0x4>, + <0x35014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x35000 0x1000>; + + wdt: wdt@0 { + compatible = "ti,am4372-wdt","ti,omap3-wdt"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@37000 { /* 0x44e37000, ap 30 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x37000 0x1000>; + }; + + target-module@39000 { /* 0x44e39000, ap 32 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x39000 0x1000>; + }; + + target-module@3e000 { /* 0x44e3e000, ap 34 60.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "rtc"; + reg = <0x3e074 0x4>, + <0x3e078 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */ + clocks = <&l4_rtc_clkctrl AM4_L4_RTC_RTC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + rtc: rtc@0 { + compatible = "ti,am4372-rtc", "ti,am3352-rtc", + "ti,da830-rtc"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_32768_ck>; + clock-names = "int-clk"; + system-power-controller; + status = "disabled"; + }; + }; + + target-module@40000 { /* 0x44e40000, ap 36 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x40000>; + }; + + target-module@86000 { /* 0x44e86000, ap 40 70.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x86000 0x4>, + <0x86004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): wkup_pwrdm, l4_wkup_aon_clkdm */ + clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,am4372-counter32k","ti,omap-counter32k"; + reg = <0x0 0x40>; + }; + }; + + target-module@88000 { /* 0x44e88000, ap 38 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00088000 0x00008000>, + <0x00008000 0x00090000 0x00001000>, + <0x00009000 0x00091000 0x00001000>; + }; + }; +}; + +&l4_fast { /* 0x4a000000 */ + compatible = "ti,am4-l4-fast", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x400>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00100000 0x00100000 0x008000>, /* ap 3 */ + <0x00108000 0x00108000 0x001000>, /* ap 4 */ + <0x00400000 0x00400000 0x002000>, /* ap 5 */ + <0x00402000 0x00402000 0x001000>, /* ap 6 */ + <0x00200000 0x00200000 0x080000>, /* ap 7 */ + <0x00280000 0x00280000 0x001000>; /* ap 8 */ + + target-module@100000 { /* 0x4a100000, ap 3 04.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "cpgmac0"; + reg = <0x101200 0x4>, + <0x101208 0x4>, + <0x101204 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x8000>; + + mac: ethernet@0 { + compatible = "ti,am4372-cpsw","ti,cpsw"; + reg = <0x0 0x800 + 0x1200 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>, + <&dpll_clksel_mac_clk>; + clock-names = "fck", "cpts", "50mclk"; + assigned-clocks = <&dpll_clksel_mac_clk>; + assigned-clock-rates = <50000000>; + status = "disabled"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + ranges = <0 0 0x8000>; + syscon = <&scm_conf>; + cpsw-phy-sel = <&phy_sel>; + + davinci_mdio: mdio@1000 { + compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x1000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + }; + + target-module@200000 { /* 0x4a200000, ap 7 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x200000 0x80000>; + }; + + target-module@400000 { /* 0x4a400000, ap 5 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x400000 0x2000>; + }; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,am4-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x100000>, /* segment 0 */ + <0x00100000 0x48100000 0x100000>, /* segment 1 */ + <0x00200000 0x48200000 0x100000>, /* segment 2 */ + <0x00300000 0x48300000 0x100000>, /* segment 3 */ + <0x46000000 0x46000000 0x400000>, /* l3 data port */ + <0x46400000 0x46400000 0x400000>; /* l3 data port */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>, /* ap 3 */ + <0x00001800 0x00001800 0x000400>, /* ap 4 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 5 */ + <0x00008000 0x00008000 0x001000>, /* ap 6 */ + <0x00009000 0x00009000 0x001000>, /* ap 7 */ + <0x00022000 0x00022000 0x001000>, /* ap 8 */ + <0x00023000 0x00023000 0x001000>, /* ap 9 */ + <0x00024000 0x00024000 0x001000>, /* ap 10 */ + <0x00025000 0x00025000 0x001000>, /* ap 11 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 12 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 13 */ + <0x00038000 0x00038000 0x002000>, /* ap 14 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 15 */ + <0x0003c000 0x0003c000 0x002000>, /* ap 16 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 17 */ + <0x00040000 0x00040000 0x001000>, /* ap 18 */ + <0x00041000 0x00041000 0x001000>, /* ap 19 */ + <0x00042000 0x00042000 0x001000>, /* ap 20 */ + <0x00043000 0x00043000 0x001000>, /* ap 21 */ + <0x00044000 0x00044000 0x001000>, /* ap 22 */ + <0x00045000 0x00045000 0x001000>, /* ap 23 */ + <0x00046000 0x00046000 0x001000>, /* ap 24 */ + <0x00047000 0x00047000 0x001000>, /* ap 25 */ + <0x00048000 0x00048000 0x001000>, /* ap 26 */ + <0x00049000 0x00049000 0x001000>, /* ap 27 */ + <0x0004c000 0x0004c000 0x001000>, /* ap 28 */ + <0x0004d000 0x0004d000 0x001000>, /* ap 29 */ + <0x00060000 0x00060000 0x001000>, /* ap 30 */ + <0x00061000 0x00061000 0x001000>, /* ap 31 */ + <0x00080000 0x00080000 0x010000>, /* ap 32 */ + <0x00090000 0x00090000 0x001000>, /* ap 33 */ + <0x00030000 0x00030000 0x001000>, /* ap 65 */ + <0x00031000 0x00031000 0x001000>, /* ap 66 */ + <0x0004a000 0x0004a000 0x001000>, /* ap 71 */ + <0x0004b000 0x0004b000 0x001000>, /* ap 72 */ + <0x000c8000 0x000c8000 0x001000>, /* ap 73 */ + <0x000c9000 0x000c9000 0x001000>, /* ap 74 */ + <0x000ca000 0x000ca000 0x001000>, /* ap 77 */ + <0x000cb000 0x000cb000 0x001000>, /* ap 78 */ + <0x00034000 0x00034000 0x001000>, /* ap 80 */ + <0x00035000 0x00035000 0x001000>, /* ap 81 */ + <0x00036000 0x00036000 0x001000>, /* ap 84 */ + <0x00037000 0x00037000 0x001000>, /* ap 85 */ + <0x46000000 0x46000000 0x400000>, /* l3 data port */ + <0x46400000 0x46400000 0x400000>; /* l3 data port */ + + target-module@8000 { /* 0x48008000, ap 6 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@22000 { /* 0x48022000, ap 8 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x22050 0x4>, + <0x22054 0x4>, + <0x22058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + uart1: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x48024000, ap 10 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x24050 0x4>, + <0x24054 0x4>, + <0x24058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + uart2: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@2a000 { /* 0x4802a000, ap 12 22.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x2a000 0x8>, + <0x2a010 0x8>, + <0x2a090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x48030000, ap 65 08.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi0"; + reg = <0x30000 0x4>, + <0x30110 0x4>, + <0x30114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>; + + spi0: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@34000 { /* 0x48034000, ap 80 56.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + }; + + target-module@36000 { /* 0x48036000, ap 84 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@38000 { /* 0x48038000, ap 14 04.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "mcasp0"; + reg = <0x38000 0x4>, + <0x38004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_MCASP0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x2000>, + <0x46000000 0x46000000 0x400000>; + + mcasp0: mcasp@0 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 8 2>, + <&edma 9 2>; + dma-names = "tx", "rx"; + }; + }; + + target-module@3c000 { /* 0x4803c000, ap 16 2a.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "mcasp1"; + reg = <0x3c000 0x4>, + <0x3c004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_MCASP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x2000>, + <0x46400000 0x46400000 0x400000>; + + mcasp1: mcasp@0 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 10 2>, + <&edma 11 2>; + dma-names = "tx", "rx"; + }; + }; + + target-module@40000 { /* 0x48040000, ap 18 1e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x40000 0x4>, + <0x40010 0x4>, + <0x40014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + timer2: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&timer2_fck>; + clock-names = "fck"; + }; + }; + + target-module@42000 { /* 0x48042000, ap 20 24.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x42000 0x4>, + <0x42010 0x4>, + <0x42014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + + timer3: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@44000 { /* 0x48044000, ap 22 26.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x44000 0x4>, + <0x44010 0x4>, + <0x44014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x44000 0x1000>; + + timer4: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + status = "disabled"; + }; + }; + + target-module@46000 { /* 0x48046000, ap 24 28.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x46000 0x4>, + <0x46010 0x4>, + <0x46014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + + timer5: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + status = "disabled"; + }; + }; + + target-module@48000 { /* 0x48048000, ap 26 1a.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x48000 0x4>, + <0x48010 0x4>, + <0x48014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48000 0x1000>; + + timer6: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + status = "disabled"; + }; + }; + + target-module@4a000 { /* 0x4804a000, ap 71 48.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x4a000 0x4>, + <0x4a010 0x4>, + <0x4a014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4a000 0x1000>; + + timer7: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + status = "disabled"; + }; + }; + + target-module@4c000 { /* 0x4804c000, ap 28 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x4c000 0x4>, + <0x4c010 0x4>, + <0x4c114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@60000 { /* 0x48060000, ap 30 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x602fc 0x4>, + <0x60110 0x4>, + <0x60114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x1000>; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 0>, + <&edma 25 0>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@80000 { /* 0x48080000, ap 32 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "elm"; + reg = <0x80000 0x4>, + <0x80010 0x4>, + <0x80014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + target-module@c8000 { /* 0x480c8000, ap 73 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox"; + reg = <0xc8000 0x4>, + <0xc8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; + }; + }; + + target-module@ca000 { /* 0x480ca000, ap 77 38.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0xca000 0x4>, + <0xca010 0x4>, + <0xca014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xca000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x48100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 34 */ + <0x0008d000 0x0018d000 0x001000>, /* ap 35 */ + <0x0008e000 0x0018e000 0x001000>, /* ap 36 */ + <0x0008f000 0x0018f000 0x001000>, /* ap 37 */ + <0x0009c000 0x0019c000 0x001000>, /* ap 38 */ + <0x0009d000 0x0019d000 0x001000>, /* ap 39 */ + <0x000a6000 0x001a6000 0x001000>, /* ap 40 */ + <0x000a7000 0x001a7000 0x001000>, /* ap 41 */ + <0x000a8000 0x001a8000 0x001000>, /* ap 42 */ + <0x000a9000 0x001a9000 0x001000>, /* ap 43 */ + <0x000aa000 0x001aa000 0x001000>, /* ap 44 */ + <0x000ab000 0x001ab000 0x001000>, /* ap 45 */ + <0x000ac000 0x001ac000 0x001000>, /* ap 46 */ + <0x000ad000 0x001ad000 0x001000>, /* ap 47 */ + <0x000ae000 0x001ae000 0x001000>, /* ap 48 */ + <0x000af000 0x001af000 0x001000>, /* ap 49 */ + <0x000cc000 0x001cc000 0x002000>, /* ap 50 */ + <0x000ce000 0x001ce000 0x002000>, /* ap 51 */ + <0x000d0000 0x001d0000 0x002000>, /* ap 52 */ + <0x000d2000 0x001d2000 0x002000>, /* ap 53 */ + <0x000d8000 0x001d8000 0x001000>, /* ap 54 */ + <0x000d9000 0x001d9000 0x001000>, /* ap 55 */ + <0x000a0000 0x001a0000 0x001000>, /* ap 67 */ + <0x000a1000 0x001a1000 0x001000>, /* ap 68 */ + <0x000a2000 0x001a2000 0x001000>, /* ap 69 */ + <0x000a3000 0x001a3000 0x001000>, /* ap 70 */ + <0x000a4000 0x001a4000 0x001000>, /* ap 92 */ + <0x000a5000 0x001a5000 0x001000>, /* ap 93 */ + <0x000c1000 0x001c1000 0x001000>, /* ap 94 */ + <0x000c2000 0x001c2000 0x001000>; /* ap 95 */ + + target-module@8c000 { /* 0x4818c000, ap 34 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8c000 0x1000>; + }; + + target-module@8e000 { /* 0x4818e000, ap 36 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8e000 0x1000>; + }; + + target-module@9c000 { /* 0x4819c000, ap 38 52.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x9c000 0x8>, + <0x9c010 0x8>, + <0x9c090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,am4372-i2c","ti,omap4-i2c"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@a0000 { /* 0x481a0000, ap 67 2c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi1"; + reg = <0xa0000 0x4>, + <0xa0110 0x4>, + <0xa0114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x1000>; + + spi1: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@a2000 { /* 0x481a2000, ap 69 2e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi2"; + reg = <0xa2000 0x4>, + <0xa2110 0x4>, + <0xa2114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + + spi2: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@a4000 { /* 0x481a4000, ap 92 62.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi3"; + reg = <0xa4000 0x4>, + <0xa4110 0x4>, + <0xa4114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa4000 0x1000>; + + spi3: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@a6000 { /* 0x481a6000, ap 40 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0xa6050 0x4>, + <0xa6054 0x4>, + <0xa6058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa6000 0x1000>; + + uart3: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@a8000 { /* 0x481a8000, ap 42 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart5"; + reg = <0xa8050 0x4>, + <0xa8054 0x4>, + <0xa8058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x1000>; + + uart4: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@aa000 { /* 0x481aa000, ap 44 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart6"; + reg = <0xaa050 0x4>, + <0xaa054 0x4>, + <0xaa058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_UART6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xaa000 0x1000>; + + uart5: serial@0 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@ac000 { /* 0x481ac000, ap 46 30.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0xac000 0x4>, + <0xac010 0x4>, + <0xac114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xac000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@ae000 { /* 0x481ae000, ap 48 32.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0xae000 0x4>, + <0xae010 0x4>, + <0xae114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xae000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@c1000 { /* 0x481c1000, ap 94 68.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer8"; + reg = <0xc1000 0x4>, + <0xc1010 0x4>, + <0xc1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc1000 0x1000>; + + timer8: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@cc000 { /* 0x481cc000, ap 50 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "d_can0"; + reg = <0xcc000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xcc000 0x2000>; + + dcan0: can@0 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + reg = <0x0 0x2000>; + syscon-raminit = <&scm_conf 0x644 0>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "d_can1"; + reg = <0xd0000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000 0x2000>; + + dcan1: can@0 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + reg = <0x0 0x2000>; + syscon-raminit = <&scm_conf 0x644 1>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@d8000 { /* 0x481d8000, ap 54 5e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xd82fc 0x4>, + <0xd8110 0x4>, + <0xd8114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd8000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x1000>; + ti,needs-special-reset; + dmas = <&edma 2 0>, + <&edma 3 0>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@300000 { /* 0x48300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00300000 0x001000>, /* ap 56 */ + <0x00001000 0x00301000 0x001000>, /* ap 57 */ + <0x00002000 0x00302000 0x001000>, /* ap 58 */ + <0x00003000 0x00303000 0x001000>, /* ap 59 */ + <0x00004000 0x00304000 0x001000>, /* ap 60 */ + <0x00005000 0x00305000 0x001000>, /* ap 61 */ + <0x00018000 0x00318000 0x004000>, /* ap 62 */ + <0x0001c000 0x0031c000 0x001000>, /* ap 63 */ + <0x00010000 0x00310000 0x002000>, /* ap 64 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00012000 0x00312000 0x001000>, /* ap 79 */ + <0x00020000 0x00320000 0x001000>, /* ap 82 */ + <0x00021000 0x00321000 0x001000>, /* ap 83 */ + <0x00026000 0x00326000 0x001000>, /* ap 86 */ + <0x00027000 0x00327000 0x001000>, /* ap 87 */ + <0x0002a000 0x0032a000 0x000400>, /* ap 88 */ + <0x0002c000 0x0032c000 0x001000>, /* ap 89 */ + <0x00013000 0x00313000 0x001000>, /* ap 90 */ + <0x00014000 0x00314000 0x001000>, /* ap 91 */ + <0x00006000 0x00306000 0x001000>, /* ap 96 */ + <0x00007000 0x00307000 0x001000>, /* ap 97 */ + <0x00008000 0x00308000 0x001000>, /* ap 98 */ + <0x00009000 0x00309000 0x001000>, /* ap 99 */ + <0x0000a000 0x0030a000 0x001000>, /* ap 100 */ + <0x0000b000 0x0030b000 0x001000>, /* ap 101 */ + <0x0003d000 0x0033d000 0x001000>, /* ap 102 */ + <0x0003e000 0x0033e000 0x001000>, /* ap 103 */ + <0x0003f000 0x0033f000 0x001000>, /* ap 104 */ + <0x00040000 0x00340000 0x001000>, /* ap 105 */ + <0x00041000 0x00341000 0x001000>, /* ap 106 */ + <0x00042000 0x00342000 0x001000>, /* ap 107 */ + <0x00045000 0x00345000 0x001000>, /* ap 108 */ + <0x00046000 0x00346000 0x001000>, /* ap 109 */ + <0x00047000 0x00347000 0x001000>, /* ap 110 */ + <0x00048000 0x00348000 0x001000>, /* ap 111 */ + <0x000f2000 0x003f2000 0x002000>, /* ap 112 */ + <0x000f4000 0x003f4000 0x001000>, /* ap 113 */ + <0x0004c000 0x0034c000 0x002000>, /* ap 114 */ + <0x0004e000 0x0034e000 0x001000>, /* ap 115 */ + <0x00022000 0x00322000 0x001000>, /* ap 116 */ + <0x00023000 0x00323000 0x001000>, /* ap 117 */ + <0x000f0000 0x003f0000 0x001000>, /* ap 118 */ + <0x0002a400 0x0032a400 0x000400>, /* ap 119 */ + <0x0002a800 0x0032a800 0x000400>, /* ap 120 */ + <0x0002ac00 0x0032ac00 0x000400>, /* ap 121 */ + <0x0002b000 0x0032b000 0x001000>, /* ap 122 */ + <0x00080000 0x00380000 0x020000>, /* ap 123 */ + <0x000a0000 0x003a0000 0x001000>, /* ap 124 */ + <0x000a8000 0x003a8000 0x008000>, /* ap 125 */ + <0x000b0000 0x003b0000 0x001000>, /* ap 126 */ + <0x000c0000 0x003c0000 0x020000>, /* ap 127 */ + <0x000e0000 0x003e0000 0x001000>, /* ap 128 */ + <0x000e8000 0x003e8000 0x008000>; /* ap 129 */ + + target-module@0 { /* 0x48300000, ap 56 40.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss0"; + reg = <0x0 0x4>, + <0x4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + epwmss0: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ecap0: ecap@100 { + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm0: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@2000 { /* 0x48302000, ap 58 4a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss1"; + reg = <0x2000 0x4>, + <0x2004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + epwmss1: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ecap1: ecap@100 { + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm1: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@4000 { /* 0x48304000, ap 60 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss2"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + epwmss2: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ecap2: ecap@100 { + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm2: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@6000 { /* 0x48306000, ap 96 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss3"; + reg = <0x6000 0x4>, + <0x6004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x1000>; + + epwmss3: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ehrpwm3: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@8000 { /* 0x48308000, ap 98 54.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss4"; + reg = <0x8000 0x4>, + <0x8004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + epwmss4: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ehrpwm4: pwm@48308200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@a000 { /* 0x4830a000, ap 100 60.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss5"; + reg = <0xa000 0x4>, + <0xa004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + epwmss5: epwmss@0 { + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + reg = <0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + status = "disabled"; + + ehrpwm5: pwm@200 { + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@10000 { /* 0x48310000, ap 64 4e.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "rng"; + reg = <0x11fe0 0x4>, + <0x11fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_RNG_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@13000 { /* 0x48313000, ap 90 50.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x13000 0x1000>; + }; + + target-module@18000 { /* 0x48318000, ap 62 4c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x4000>; + }; + + target-module@20000 { /* 0x48320000, ap 82 34.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio5"; + reg = <0x20000 0x4>, + <0x20010 0x4>, + <0x20114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@22000 { /* 0x48322000, ap 116 64.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio6"; + reg = <0x22000 0x4>, + <0x22010 0x4>, + <0x22114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 0>, + <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,am4372-gpio","ti,omap4-gpio"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + target-module@26000 { /* 0x48326000, ap 86 66.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "vpfe0"; + reg = <0x26000 0x4>, + <0x26104 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_VPFE0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + + vpfe0: vpfe@0 { + compatible = "ti,am437x-vpfe"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@28000 { /* 0x48328000, ap 75 0e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "vpfe1"; + reg = <0x28000 0x4>, + <0x28104 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_VPFE1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + + vpfe1: vpfe@0 { + compatible = "ti,am437x-vpfe"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@2a000 { /* 0x4832a000, ap 88 3c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "dss_core"; + reg = <0x2a000 0x4>, + <0x2a010 0x4>, + <0x2a014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, dss_clkdm */ + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x0002a000 0x00000400>, + <0x00000400 0x0002a400 0x00000400>, + <0x00000800 0x0002a800 0x00000400>, + <0x00000c00 0x0002ac00 0x00000400>, + <0x00001000 0x0002b000 0x00001000>; + }; + + target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer9"; + reg = <0x3d000 0x4>, + <0x3d010 0x4>, + <0x3d014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3d000 0x1000>; + + timer9: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@3f000 { /* 0x4833f000, ap 104 5c.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer10"; + reg = <0x3f000 0x4>, + <0x3f010 0x4>, + <0x3f014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3f000 0x1000>; + + timer10: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@41000 { /* 0x48341000, ap 106 76.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer11"; + reg = <0x41000 0x4>, + <0x41010 0x4>, + <0x41014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x41000 0x1000>; + + timer11: timer@0 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@45000 { /* 0x48345000, ap 108 6a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spi4"; + reg = <0x45000 0x4>, + <0x45110 0x4>, + <0x45114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_SPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x45000 0x1000>; + + spi4: spi@0 { + compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@47000 { /* 0x48347000, ap 110 70.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hdq1w"; + reg = <0x47000 0x4>, + <0x47014 0x4>, + <0x47018 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_HDQ1W_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x47000 0x1000>; + + hdq: hdq@0 { + compatible = "ti,am4372-hdq"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&func_12m_clk>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + target-module@4c000 { /* 0x4834c000, ap 114 72.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x2000>; + }; + + target-module@80000 { /* 0x48380000, ap 123 42.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss0"; + reg = <0x80000 0x4>, + <0x80010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x20000>; + + dwc3_1: omap_dwc3@0 { + compatible = "ti,am437x-dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges = <0 0 0x20000>; + + usb1: usb@10000 { + compatible = "synopsys,dwc3"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + }; + + target-module@a8000 { /* 0x483a8000, ap 125 6c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ocp2scp0"; + reg = <0xa8000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x8000>; + + ocp2scp0: ocp2scp@0 { + compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x8000>; + + usb2_phy1: phy@8000 { + compatible = "ti,am437x-usb2"; + reg = <0x0 0x8000>; + syscon-phy-power = <&scm_conf 0x620>; + clocks = <&usb_phy0_always_on_clk32k>, + <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 8>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + target-module@c0000 { /* 0x483c0000, ap 127 7a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss1"; + reg = <0xc0000 0x4>, + <0xc0010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): per_pwrdm, l3s_clkdm */ + clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x20000>; + + dwc3_2: omap_dwc3@0 { + compatible = "ti,am437x-dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges = <0 0 0x20000>; + + usb2: usb@10000 { + compatible = "synopsys,dwc3"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + }; + + target-module@e8000 { /* 0x483e8000, ap 129 78.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ocp2scp1"; + reg = <0xe8000 0x4>; + reg-names = "rev"; + /* Domains (P, C): per_pwrdm, l4ls_clkdm */ + clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe8000 0x8000>; + + ocp2scp1: ocp2scp@0 { + compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x8000>; + + usb2_phy2: phy@8000 { + compatible = "ti,am437x-usb2"; + reg = <0x0 0x8000>; + syscon-phy-power = <&scm_conf 0x628>; + clocks = <&usb_phy1_always_on_clk32k>, + <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 8>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + target-module@f2000 { /* 0x483f2000, ap 112 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf2000 0x2000>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index a7037a4b4fd4..e3f420793c12 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -710,73 +710,123 @@ }; &prcm { - l4_wkup_cm: l4_wkup_cm@2800 { + wkup_cm: wkup-cm@2800 { compatible = "ti,omap4-cm"; reg = <0x2800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x2800 0x400>; - l4_wkup_clkctrl: clk@20 { + l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 { compatible = "ti,clkctrl"; - reg = <0x20 0x34c>; + reg = <0x120 0x4>; #clock-cells = <2>; }; + + l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 { + compatible = "ti,clkctrl"; + reg = <0x228 0xc>; + #clock-cells = <2>; + }; + + l4_wkup_clkctrl: l4-wkup-clkctrl@220 { + compatible = "ti,clkctrl"; + reg = <0x220 0x4>, <0x328 0x44>; + #clock-cells = <2>; + }; + }; - mpu_cm: mpu_cm@8300 { + mpu_cm: mpu-cm@8300 { compatible = "ti,omap4-cm"; reg = <0x8300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8300 0x100>; - mpu_clkctrl: clk@20 { + mpu_clkctrl: mpu-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx_l3_cm@8400 { + gfx_l3_cm: gfx-l3-cm@8400 { compatible = "ti,omap4-cm"; reg = <0x8400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8400 0x100>; - gfx_l3_clkctrl: clk@20 { + gfx_l3_clkctrl: gfx-l3-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4_rtc_cm@8500 { + l4_rtc_cm: l4-rtc-cm@8500 { compatible = "ti,omap4-cm"; reg = <0x8500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8500 0x100>; - l4_rtc_clkctrl: clk@20 { + l4_rtc_clkctrl: l4-rtc-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l4_per_cm: l4_per_cm@8800 { + per_cm: per-cm@8800 { compatible = "ti,omap4-cm"; reg = <0x8800 0xc00>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8800 0xc00>; - l4_per_clkctrl: clk@20 { + l3_clkctrl: l3-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x3c>, <0x78 0x2c>; + #clock-cells = <2>; + }; + + l3s_clkctrl: l3s-clkctrl@68 { + compatible = "ti,clkctrl"; + reg = <0x68 0xc>, <0x220 0x4c>; + #clock-cells = <2>; + }; + + pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 { compatible = "ti,clkctrl"; - reg = <0x20 0xb04>; + reg = <0x320 0x4>; #clock-cells = <2>; }; + + l4ls_clkctrl: l4ls-clkctrl@420 { + compatible = "ti,clkctrl"; + reg = <0x420 0x1a4>; + #clock-cells = <2>; + }; + + emif_clkctrl: emif-clkctrl@720 { + compatible = "ti,clkctrl"; + reg = <0x720 0x4>; + #clock-cells = <2>; + }; + + dss_clkctrl: dss-clkctrl@a20 { + compatible = "ti,clkctrl"; + reg = <0xa20 0x4>; + #clock-cells = <2>; + }; + + cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 { + compatible = "ti,clkctrl"; + reg = <0xb20 0x4>; + #clock-cells = <2>; + }; + }; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index ad953113cefb..1e6620f139dd 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -555,7 +555,7 @@ &mcasp3 { #sound-dai-cells = <0>; - assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; + assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&sys_clkin2>; status = "okay"; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index a5676697ff3b..916a97734f84 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -44,7 +44,7 @@ }; /* The voltage to the MMC card is hardwired at 3.3V */ - vmmc: fixedregulator@0 { + vmmc: regulator-vmmc { compatible = "regulator-fixed"; regulator-name = "vmmc"; regulator-min-microvolt = <3300000>; @@ -52,7 +52,7 @@ regulator-boot-on; }; - veth: fixedregulator@0 { + veth: regulator-veth { compatible = "regulator-fixed"; regulator-name = "veth"; regulator-min-microvolt = <3300000>; @@ -567,4 +567,3 @@ }; }; }; - diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts index df1227613d48..c2ece0b91885 100644 --- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts +++ b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts @@ -13,7 +13,7 @@ bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts new file mode 100644 index 000000000000..9f194b5eeba4 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "Facebook Backpack CMM BMC"; + compatible = "facebook,cmm-bmc", "aspeed,ast2500"; + + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + + /* + * Hardcode the bus number of i2c switches' channels to + * avoid breaking the legacy applications. + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + }; + + chosen { + stdout-path = &uart1; + bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +/* + * wdt2 is not used by Backpack CMM. + */ +&wdt2 { + status = "disabled"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_ndsr1_default + &pinctrl_ndtr1_default + &pinctrl_nrts1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default + &pinctrl_ncts3_default + &pinctrl_ndcd3_default + &pinctrl_nri3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + no-hw-checksum; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +/* + * I2C bus reserved for communication with COM-E. + */ +&i2c0 { + status = "okay"; +}; + +/* + * I2C bus to Line Cards and Fabric Cards. + */ +&i2c1 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* + * I2C bus to Power Distribution Board. + */ +&i2c2 { + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux28: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux29: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux30: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux31: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* + * I2c bus connected with temperature sensors on CMM. + */ +&i2c3 { + status = "okay"; +}; + +/* + * I2C bus reserved for communication with COM-E. + */ +&i2c4 { + status = "okay"; +}; + +/* + * I2c bus connected with ADM1278. + */ +&i2c5 { + status = "okay"; +}; + +/* + * I2c bus connected with I/O Expander. + */ +&i2c6 { + status = "okay"; +}; + +/* + * I2c bus connected with I/O Expander and EPROMs. + */ +&i2c7 { + status = "okay"; +}; + +/* + * I2C bus to Fan Control Board. + */ +&i2c8 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux36: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux37: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux38: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux39: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* + * I2C bus to CMM CPLD. + */ +&i2c13 { + status = "okay"; +}; + +&adc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts index 7a291de02543..22dade6393d0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -13,7 +13,7 @@ bootargs = "earlyprintk"; }; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts index d598b6391362..024e52a6cd0f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts @@ -14,7 +14,7 @@ bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -322,4 +322,3 @@ &adc { status = "okay"; }; - diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index c7084a819dc6..9aa1d4467453 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -26,6 +26,16 @@ no-map; reg = <0x5f000000 0x01000000>; /* 16M */ }; + + coldfire_memory: codefire_memory@5ee00000 { + reg = <0x5ee00000 0x00200000>; + no-map; + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x01000000>; /* 16MB */ + }; }; leds { @@ -44,6 +54,22 @@ }; }; + fsi: gpio-fsi { + compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; + }; + gpio-keys { compatible = "gpio-keys"; @@ -169,6 +195,12 @@ status = "okay"; }; +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi>; +}; + &gpio { pin_func_mode0 { gpio-hog; @@ -303,13 +335,6 @@ line-name = "SYS_PWROK_BMC"; }; - pin_gpio_h6 { - gpio-hog; - gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "SCM1_FSI0_DATA_EN"; - }; - pin_gpio_h7 { gpio-hog; gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 7d28c03a9e0b..76fe994f2ba4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -30,6 +30,11 @@ no-map; reg = <0x98000000 0x04000000>; /* 64M */ }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; }; leds { @@ -49,11 +54,15 @@ }; fsi: gpio-fsi { - compatible = "fsi-master-gpio", "fsi-master"; + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; #address-cells = <2>; #size-cells = <0>; no-gpio-delays; + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; @@ -76,6 +85,11 @@ linux,code = <ASPEED_GPIO(Q, 7)>; }; }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; }; &fmc { @@ -274,3 +288,11 @@ &ibt { status = "okay"; }; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 656036106001..ad54117c075e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -56,6 +56,11 @@ }; }; + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -583,3 +588,7 @@ &ibt { status = "okay"; }; + +&adc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts index 43ed13963d35..33d704541de6 100644 --- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -17,7 +17,7 @@ bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index 911d2c7c1500..0f6d335125e2 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -60,6 +60,8 @@ power-supply = <&bl_reg>; enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_blon>; }; panel: panel { @@ -164,6 +166,12 @@ (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; }; + + pinctrl_blon: blon { + atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 363a43d77424..4a258867ddf1 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -165,7 +165,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&flx1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; atmel,fifo-size = <16>; @@ -211,7 +211,7 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usart"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; @@ -223,7 +223,7 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "spi_clk"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; @@ -240,7 +240,7 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "usart"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; @@ -252,7 +252,7 @@ compatible = "atmel,at91rm9200-spi"; reg = <0x400 0x200>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "spi_clk"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>; @@ -268,7 +268,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index 2214bfe7aa20..ba7f3e646c26 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -197,7 +197,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&flx0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; atmel,fifo-size = <16>; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 518e2b095ccf..fa54e8866f1e 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -258,7 +258,7 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&flx0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "usart"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; @@ -313,7 +313,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; atmel,fifo-size = <16>; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 0702a2f2b336..12d5af938aa3 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -115,7 +115,7 @@ wm8904: codec@1a { compatible = "wlf,wm8904"; reg = <0x1a>; - clocks = <&pck2>; + clocks = <&pmc PMC_TYPE_SYSTEM 10>; clock-names = "mclk"; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 9118e29b6d6a..7cd9c3bc4dfb 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -113,276 +113,28 @@ compatible = "atmel,at91sam9260-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9260-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc>, <&slow_xtal>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 160000000 0 1>, - <150000000 240000000 2 1>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <1000000 5000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; - atmel,clk-output-range = <0 105000000>; - atmel,clk-divisors = <1 2 4 0>; - }; - - usb: usbck { - compatible = "atmel,at91rm9200-clk-usb"; - #clock-cells = <0>; - atmel,clk-divisors = <1 2 4 0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <8>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <9>; - }; - - udc_clk: udc_clk { - #clock-cells = <0>; - reg = <10>; - }; - - twi0_clk: twi0_clk { - reg = <11>; - #clock-cells = <0>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <13>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - tc0_clk: tc0_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tc1_clk: tc1_clk { - #clock-cells = <0>; - reg = <18>; - }; - - tc2_clk: tc2_clk { - #clock-cells = <0>; - reg = <19>; - }; - - ohci_clk: ohci_clk { - #clock-cells = <0>; - reg = <20>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <22>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <23>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <24>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <25>; - }; - - tc3_clk: tc3_clk { - #clock-cells = <0>; - reg = <26>; - }; - - tc4_clk: tc4_clk { - #clock-cells = <0>; - reg = <27>; - }; - - tc5_clk: tc5_clk { - #clock-cells = <0>; - reg = <28>; - }; - }; + #clock-cells = <2>; + clocks = <&slow_xtal>, <&main_xtal>; + clock-names = "slow_xtal", "main_xtal"; }; rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; - clocks = <&clk32k>; + clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; }; shdwc@fffffd10 { compatible = "atmel,at91sam9260-shdwc"; reg = <0xfffffd10 0x10>; - clocks = <&clk32k>; + clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; }; pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; tcb0: timer@fffa0000 { @@ -393,7 +145,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -405,7 +157,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -746,7 +498,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -757,7 +509,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff800 { @@ -768,7 +520,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; }; @@ -778,7 +530,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -791,7 +543,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -804,7 +556,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -817,7 +569,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -830,7 +582,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "usart"; status = "disabled"; }; @@ -843,7 +595,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "usart"; status = "disabled"; }; @@ -856,7 +608,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "usart"; status = "disabled"; }; @@ -867,7 +619,7 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -876,7 +628,7 @@ compatible = "atmel,at91sam9260-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udc_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>; clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -887,7 +639,7 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; status = "disabled"; }; @@ -898,7 +650,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "mci_clk"; status = "disabled"; }; @@ -909,7 +661,7 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "pclk"; status = "disabled"; }; @@ -922,7 +674,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "spi_clk"; status = "disabled"; }; @@ -935,7 +687,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -946,7 +698,7 @@ compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&adc_clk>, <&adc_op_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; @@ -981,7 +733,7 @@ compatible = "atmel,at91sam9260-rtt"; reg = <0xfffffd20 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k>; + clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; status = "disabled"; }; @@ -989,7 +741,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k>; + clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; @@ -1007,7 +759,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1027,7 +779,7 @@ 0x5 0x0 0x60000000 0x10000000 0x6 0x0 0x70000000 0x10000000 0x7 0x0 0x80000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 33f09d5ea020..01d700b63b45 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -75,7 +75,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&ohci_clk>, <&hclk0>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -86,7 +86,7 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; - clocks = <&lcd_clk>, <&hclk1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>; clock-names = "lcdc_clk", "hclk"; status = "disabled"; }; @@ -106,7 +106,7 @@ 0x5 0x0 0x60000000 0x10000000 0x6 0x0 0x70000000 0x10000000 0x7 0x0 0x80000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { @@ -132,7 +132,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>, <18 IRQ_TYPE_LEVEL_HIGH 0>, <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -140,7 +140,7 @@ compatible = "atmel,at91sam9261-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udc_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>; clock-names = "pclk", "hclk"; atmel,matrix = <&matrix>; status = "disabled"; @@ -154,7 +154,7 @@ pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "mci_clk"; status = "disabled"; }; @@ -167,7 +167,7 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; status = "disabled"; }; @@ -179,7 +179,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -192,7 +192,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -205,7 +205,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -216,7 +216,7 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "pclk"; status = "disabled"; }; @@ -227,7 +227,7 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "pclk"; status = "disabled"; }; @@ -238,7 +238,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; - clocks = <&ssc2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "pclk"; status = "disabled"; }; @@ -252,7 +252,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "spi_clk"; status = "disabled"; }; @@ -265,7 +265,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -299,7 +299,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -563,7 +563,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -574,7 +574,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff800 { @@ -585,7 +585,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; }; @@ -593,250 +593,9 @@ compatible = "atmel,at91sam9261-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, - <190000000 240000000 2 1>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <1000000 5000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 0>; - }; - - usb: usbck { - compatible = "atmel,at91rm9200-clk-usb"; - #clock-cells = <0>; - atmel,clk-divisors = <1 2 4 0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - - prog3: prog3 { - #clock-cells = <0>; - reg = <3>; - interrupts = <AT91_PMC_PCKRDY(3)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - - pck3: pck3 { - #clock-cells = <0>; - reg = <11>; - clocks = <&prog3>; - }; - - hclk0: hclk0 { - #clock-cells = <0>; - reg = <16>; - clocks = <&mck>; - }; - - hclk1: hclk1 { - #clock-cells = <0>; - reg = <17>; - clocks = <&mck>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <8>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <9>; - }; - - udc_clk: udc_clk { - #clock-cells = <0>; - reg = <10>; - }; - - twi0_clk: twi0_clk { - reg = <11>; - #clock-cells = <0>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <13>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - ssc2_clk: ssc2_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tc0_clk: tc0_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tc1_clk: tc1_clk { - #clock-cells = <0>; - reg = <18>; - }; - - tc2_clk: tc2_clk { - #clock-cells = <0>; - reg = <19>; - }; - - ohci_clk: ohci_clk { - #clock-cells = <0>; - reg = <20>; - }; - - lcd_clk: lcd_clk { - #clock-cells = <0>; - reg = <21>; - }; - }; + #clock-cells = <2>; + clocks = <&slow_xtal>, <&main_xtal>; + clock-names = "slow_xtal", "main_xtal"; }; rstc@fffffd00 { @@ -855,7 +614,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; rtc@fffffd20 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index af68a86c9973..c5766da4e54e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -96,264 +96,9 @@ compatible = "atmel,at91sam9263-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - clocks = <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, - <190000000 240000000 2 1>; - }; - - pllb: pllbck { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKB>; - clocks = <&main>; - reg = <1>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, - <190000000 240000000 2 1>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - atmel,clk-output-range = <0 120000000>; - atmel,clk-divisors = <1 2 4 0>; - }; - - usb: usbck { - compatible = "atmel,at91rm9200-clk-usb"; - #clock-cells = <0>; - atmel,clk-divisors = <1 2 4 0>; - clocks = <&pllb>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - - prog3: prog3 { - #clock-cells = <0>; - reg = <3>; - interrupts = <AT91_PMC_PCKRDY(3)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - - pck3: pck3 { - #clock-cells = <0>; - reg = <11>; - clocks = <&prog3>; - }; - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioCDE_clk: pioCDE_clk { - #clock-cells = <0>; - reg = <4>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <8>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <9>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <10>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <11>; - }; - - can_clk: can_clk { - #clock-cells = <0>; - reg = <12>; - }; - - twi0_clk: twi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <16>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <17>; - }; - - ac97_clk: ac97_clk { - #clock-cells = <0>; - reg = <18>; - }; - - tcb_clk: tcb_clk { - #clock-cells = <0>; - reg = <19>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <20>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - g2de_clk: g2de_clk { - #clock-cells = <0>; - reg = <23>; - }; - - udc_clk: udc_clk { - #clock-cells = <0>; - reg = <24>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <25>; - }; - - lcd_clk: lcd_clk { - #clock-cells = <0>; - reg = <26>; - }; - - dma_clk: dma_clk { - #clock-cells = <0>; - reg = <27>; - }; - - ohci_clk: ohci_clk { - #clock-cells = <0>; - reg = <29>; - }; - }; + #clock-cells = <2>; + clocks = <&slow_xtal>, <&main_xtal>; + clock-names = "slow_xtal", "main_xtal"; }; ramc0: ramc@ffffe200 { @@ -385,7 +130,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; tcb0: timer@fff7c000 { @@ -394,7 +139,7 @@ #size-cells = <0>; reg = <0xfff7c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>, <&slow_xtal>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>; clock-names = "t0_clk", "slow_clk"; }; @@ -736,7 +481,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff400 { @@ -747,7 +492,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff600 { @@ -758,7 +503,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffff800 { @@ -769,7 +514,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioE: gpio@fffffa00 { @@ -780,7 +525,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCDE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; }; @@ -790,7 +535,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -803,7 +548,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -816,7 +561,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -829,7 +574,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; status = "disabled"; }; @@ -840,7 +585,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "pclk"; status = "disabled"; }; @@ -851,7 +596,7 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; clock-names = "pclk"; status = "disabled"; }; @@ -862,7 +607,7 @@ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ac97>; - clocks = <&ac97_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; clock-names = "ac97_clk"; status = "disabled"; }; @@ -873,7 +618,7 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -882,7 +627,7 @@ compatible = "atmel,at91sam9263-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udc_clk>, <&udpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_SYSTEM 7>; clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -893,7 +638,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; status = "disabled"; }; @@ -904,7 +649,7 @@ pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "mci_clk"; status = "disabled"; }; @@ -916,7 +661,7 @@ pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "mci_clk"; status = "disabled"; }; @@ -940,7 +685,7 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; status = "disabled"; }; @@ -953,7 +698,7 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "spi_clk"; status = "disabled"; }; @@ -963,7 +708,7 @@ reg = <0xfffb8000 0x300>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "pwm_clk"; status = "disabled"; }; @@ -974,7 +719,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can_rx_tx>; - clocks = <&can_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "can_clk"; }; @@ -1007,7 +752,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; - clocks = <&lcd_clk>, <&lcd_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "lcdc_clk", "hclk"; status = "disabled"; }; @@ -1016,7 +761,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1034,7 +779,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller0: nand-controller { @@ -1055,7 +800,7 @@ reg = <0x80000000 0x20000000>; ranges = <0x0 0x0 0x80000000 0x10000000 0x1 0x0 0x90000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller1: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index 27de7dc0f0e0..b34a6c65bd44 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -24,6 +24,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 90705ee6008b..e976fd6bc6fd 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -40,28 +40,7 @@ }; pmc: pmc@fffffc00 { - plla: pllack { - atmel,clk-input-range = <2000000 32000000>; - atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, - <695000000 750000000 1 0>, - <645000000 700000000 2 0>, - <595000000 650000000 3 0>, - <545000000 600000000 0 1>, - <495000000 550000000 1 1>, - <445000000 500000000 2 1>, - <400000000 450000000 3 1>; - }; - - pllb: pllbck { - compatible = "atmel,at91sam9g20-clk-pllb"; - atmel,clk-input-range = <2000000 32000000>; - atmel,pll-clk-output-ranges = <30000000 100000000 0 0>; - }; - - mck: masterck { - atmel,clk-output-range = <0 133000000>; - atmel,clk-divisors = <1 2 4 6>; - }; + compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon"; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index 0898213f3bb2..d8bb56253e64 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -26,6 +26,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 31fecc2cdaf9..ac730812a81d 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -32,9 +32,9 @@ pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; - clocks = <&pck0>; + clocks = <&pmc PMC_TYPE_SYSTEM 8>; clock-names = "xvclk"; - assigned-clocks = <&pck0>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; assigned-clock-rates = <25000000>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index ff4115886f97..333e158feb61 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -25,6 +25,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 8fb22030f00b..3862ff2f26e0 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -88,7 +88,7 @@ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; - clocks = <&lcd_clk>, <&lcd_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "hclk", "lcdc_clk"; status = "disabled"; }; @@ -106,7 +106,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { @@ -132,7 +132,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>, <17 IRQ_TYPE_LEVEL_HIGH 0>, <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>, <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; @@ -143,7 +143,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "mci_clk"; status = "disabled"; }; @@ -154,7 +154,7 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; status = "disabled"; }; @@ -175,7 +175,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -188,7 +188,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -201,7 +201,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; @@ -214,7 +214,7 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; status = "disabled"; }; @@ -242,7 +242,7 @@ reg = <0xfffc8000 0x300>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; clock-names = "pwm_clk"; status = "disabled"; }; @@ -255,7 +255,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -266,7 +266,7 @@ compatible = "atmel,at91sam9rl-adc"; reg = <0xfffd0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&adc_clk>, <&adc_op_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0x3f>; @@ -304,7 +304,7 @@ reg = <0x00600000 0x100000>, <0xfffd4000 0x4000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -366,7 +366,7 @@ reg = <0xffffe600 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "dma_clk"; }; @@ -399,7 +399,7 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -794,7 +794,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -805,7 +805,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff800 { @@ -816,7 +816,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffffa00 { @@ -827,7 +827,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; }; @@ -835,202 +835,9 @@ compatible = "atmel,at91sam9rl-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <3>; - atmel,pll-clk-output-ranges = <80000000 200000000 0>, - <190000000 240000000 2>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91rm9200-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plla>, <&utmi>; - atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 0>; - }; - - prog: progck { - compatible = "atmel,at91rm9200-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - }; - - periphck { - compatible = "atmel,at91rm9200-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <3>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <4>; - }; - - pioD_clk: pioD_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <8>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <9>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <10>; - }; - - twi0_clk: twi0_clk { - #clock-cells = <0>; - reg = <11>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <14>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <15>; - }; - - tc0_clk: tc0_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tc1_clk: tc1_clk { - #clock-cells = <0>; - reg = <17>; - }; - - tc2_clk: tc2_clk { - #clock-cells = <0>; - reg = <18>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <19>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <20>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <21>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <22>; - }; - - lcd_clk: lcd_clk { - #clock-cells = <0>; - reg = <23>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; rstc@fffffd00 { @@ -1049,7 +856,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; watchdog@fffffd40 { diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 3c5fa3388997..a99703a262c9 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -27,6 +27,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index d9054e8167b7..bca274d33f68 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -26,6 +26,10 @@ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 11c0ef102ab1..07443a387a8f 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -111,7 +111,7 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; - clocks = <&ddrck>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; @@ -124,269 +124,9 @@ compatible = "atmel,at91sam9x5-pmc", "syscon"; reg = <0xfffffc00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <50000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc>, <&main_osc>; - }; - - plla: pllack { - compatible = "atmel,at91rm9200-clk-pll"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <2000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <745000000 800000000 0 0 - 695000000 750000000 1 0 - 645000000 700000000 2 0 - 595000000 650000000 3 0 - 545000000 600000000 0 1 - 495000000 555000000 1 1 - 445000000 500000000 2 1 - 400000000 450000000 3 1>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <0 133333333>; - atmel,clk-divisors = <1 2 4 3>; - atmel,master-clk-have-div3-pres; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - }; - - smd: smdclk { - compatible = "atmel,at91sam9x5-clk-smd"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - smdck: smdck { - #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - }; - - periphck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - pioAB_clk: pioAB_clk { - #clock-cells = <0>; - reg = <2>; - }; - - pioCD_clk: pioCD_clk { - #clock-cells = <0>; - reg = <3>; - }; - - smd_clk: smd_clk { - #clock-cells = <0>; - reg = <4>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <7>; - }; - - twi0_clk: twi0_clk { - reg = <9>; - #clock-cells = <0>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <10>; - }; - - twi2_clk: twi2_clk { - #clock-cells = <0>; - reg = <11>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <12>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <13>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <14>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <15>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <16>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <17>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <18>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <19>; - }; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <20>; - }; - - dma1_clk: dma1_clk { - #clock-cells = <0>; - reg = <21>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <22>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <23>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <26>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <28>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; reset_controller: rstc@fffffe00 { @@ -405,7 +145,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; sckc@fffffe50 { @@ -438,7 +178,7 @@ #size-cells = <0>; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -448,7 +188,7 @@ #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -457,7 +197,7 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; clock-names = "dma_clk"; }; @@ -466,7 +206,7 @@ reg = <0xffffee00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; - clocks = <&dma1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "dma_clk"; }; @@ -864,7 +604,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioAB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff600 { @@ -876,7 +616,7 @@ #gpio-lines = <19>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioAB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioC: gpio@fffff800 { @@ -887,7 +627,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioD: gpio@fffffa00 { @@ -899,7 +639,7 @@ #gpio-lines = <22>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioCD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; }; @@ -912,7 +652,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "pclk"; status = "disabled"; }; @@ -924,7 +664,7 @@ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; @@ -938,7 +678,7 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; @@ -954,7 +694,7 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>, <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; @@ -968,7 +708,7 @@ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>, <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "usart"; status = "disabled"; }; @@ -982,7 +722,7 @@ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>, <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -996,7 +736,7 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>, <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -1012,7 +752,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; status = "disabled"; }; @@ -1027,7 +767,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; status = "disabled"; }; @@ -1042,7 +782,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&twi2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; status = "disabled"; }; @@ -1052,7 +792,7 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "usart"; status = "disabled"; }; @@ -1063,7 +803,7 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "usart"; status = "disabled"; }; @@ -1074,7 +814,7 @@ compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&adc_clk>, + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; @@ -1121,7 +861,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1137,7 +877,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1149,7 +889,7 @@ reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&utmi>, <&udphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "hclk", "pclk"; status = "disabled"; @@ -1229,7 +969,7 @@ compatible = "atmel,at91sam9rl-pwm"; reg = <0xf8034000 0x300>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; #pwm-cells = <3>; status = "disabled"; }; @@ -1239,7 +979,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1248,7 +988,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -1266,7 +1006,7 @@ 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi index 8eb2f9c1b978..125f9e3b49ad 100644 --- a/arch/arm/boot/dts/at91sam9x5_can.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi @@ -13,27 +13,13 @@ / { ahb { apb { - pmc: pmc@fffffc00 { - periphck { - can0_clk: can0_clk { - #clock-cells = <0>; - reg = <29>; - }; - - can1_clk: can1_clk { - #clock-cells = <0>; - reg = <30>; - }; - }; - }; - can0: can@f8000000 { compatible = "atmel,at91sam9x5-can"; reg = <0xf8000000 0x300>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_rx_tx>; - clocks = <&can0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; clock-names = "can_clk"; status = "disabled"; }; @@ -44,7 +30,7 @@ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_rx_tx>; - clocks = <&can1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "can_clk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi index 8fc45ca4dcb5..c3e45b57b6a2 100644 --- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi @@ -44,22 +44,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <25>; - }; - }; - }; - isi: isi@f8048000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf8048000 0x4000>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi_data_0_7>; - clocks = <&isi_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "isi_clk"; status = "disabled"; port { diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi index 1629db9dd563..12595fb11691 100644 --- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi @@ -17,7 +17,7 @@ compatible = "atmel,at91sam9x5-hlcdc"; reg = <0xf8038000 0x4000>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; @@ -143,23 +143,6 @@ }; }; }; - - pmc: pmc@fffffc00 { - periphck { - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <25>; - }; - }; - - systemck { - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi index 73d7e30965ba..57c2e5a4fb53 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -43,22 +43,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <24>; - }; - }; - }; - macb0: ethernet@f802c000 { compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "hclk", "pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi index d81980c40c7d..59b8da87d3c1 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -31,22 +31,13 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - macb1_clk: macb1_clk { - #clock-cells = <0>; - reg = <27>; - }; - }; - }; - macb1: ethernet@f8030000 { compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf8030000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; - clocks = <&macb1_clk>, <&macb1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>; clock-names = "hclk", "pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index a32d12b406a3..9102dfbed5d8 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -42,15 +42,6 @@ }; }; - pmc: pmc@fffffc00 { - periphck { - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <8>; - }; - }; - }; - usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x200>; @@ -60,7 +51,7 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>, <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>; dma-names = "tx", "rx"; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index 043c717dcef1..bd83962d3627 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -48,6 +48,11 @@ interrupt-controller; #interrupt-cells = <1>; + ac_power_supply: ac-power-supply { + compatible = "x-powers,axp813-ac-power-supply"; + status = "disabled"; + }; + axp_adc: adc { compatible = "x-powers,axp813-adc"; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 2fd111d9d59c..0d2538b46139 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -41,6 +41,14 @@ model = "Broadcom Northstar Plus SoC"; interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + ethernet0 = &amac0; + ethernet1 = &amac1; + ethernet2 = &amac2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index b7f79f1c431a..644d907bafbb 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 70362405c595..00323ba8f7de 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -1,12 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index cb2d6d78a7fb..29f970f864dc 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -30,9 +30,9 @@ #power-domain-cells = <1>; }; - mailbox@7e00b840 { + vchiq: mailbox@7e00b840 { compatible = "brcm,bcm2835-vchiq"; - reg = <0x7e00b840 0xf>; + reg = <0x7e00b840 0x3c>; interrupts = <0 2>; }; }; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 2fef70a09953..ac4408b34b58 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2836.dtsi" -#include "bcm2835-rpi.dtsi" +#include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/bcm2836-rpi.dtsi new file mode 100644 index 000000000000..c4c858b984c6 --- /dev/null +++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "bcm2835-rpi.dtsi" + +&vchiq { + compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 93762244be7f..42bb09044cc7 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2837.dtsi" -#include "bcm2835-rpi.dtsi" +#include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-lan7515.dtsi" #include "bcm283x-rpi-usb-host.dtsi" diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 89e6fd547c75..0c155dd4f396 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2837.dtsi" -#include "bcm2835-rpi.dtsi" +#include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 7b7ab6aea988..4a89a1885a3d 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "bcm2837.dtsi" -#include "bcm2835-rpi.dtsi" +#include "bcm2836-rpi.dtsi" / { memory { diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts new file mode 100644 index 000000000000..babcfec50dde --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "linksys,ea6500-v2", "brcm,bcm4708"; + model = "Linksys EA6500 V2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi index 9829d044aaf4..ed13af028528 100644 --- a/arch/arm/boot/dts/bcm47081.dtsi +++ b/arch/arm/boot/dts/bcm47081.dtsi @@ -1,20 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Broadcom BCM470X / BCM5301X ARM platform code. * DTS for BCM47081 SoC. * * Copyright © 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH - * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, - * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM - * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE - * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. */ #include "bcm5301x.dtsi" diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi index c645fea2b7f7..e1bb8661955f 100644 --- a/arch/arm/boot/dts/bcm4709.dtsi +++ b/arch/arm/boot/dts/bcm4709.dtsi @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ #include "bcm4708.dtsi" diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index f7c3e274b354..cdc5ff593adb 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ #include "bcm4708.dtsi" diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 19e61b5b066c..e15e2a1e9d8c 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ /dts-v1/; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 7a5c188c2676..fd7af943fb0b 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -37,6 +37,8 @@ reg = <0x0400 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart1>; status = "disabled"; }; }; @@ -391,6 +393,48 @@ status = "disabled"; }; + dmu@1800c000 { + compatible = "simple-bus"; + ranges = <0 0x1800c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + cru@100 { + compatible = "simple-bus"; + reg = <0x100 0x1a4>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + pin-controller@1c0 { + compatible = "brcm,bcm4708-pinmux"; + reg = <0x1c0 0x24>; + reg-names = "cru_gpio_control"; + + spi-pins { + groups = "spi_grp"; + function = "spi"; + }; + + i2c { + groups = "i2c_grp"; + function = "i2c"; + }; + + pwm { + groups = "pwm0_grp", "pwm1_grp", + "pwm2_grp", "pwm3_grp"; + function = "pwm"; + }; + + pinmux_uart1: uart1 { + groups = "uart1_grp"; + function = "uart1"; + }; + }; + }; + }; + lcpll0: lcpll0@1800c100 { #clock-cells = <1>; compatible = "brcm,nsp-lcpll0"; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 453a2a37dabd..5054fa9eb0d0 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> - * - * Licensed under the ISC license. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index 6df61518776f..f59764008b9c 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -143,6 +143,37 @@ reg = <0x4800e0 0x10>; #reset-cells = <2>; }; + + ahci: sata@8000 { + compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0xa000 0x9ac>, <0x8040 0x24>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&pmb0 3 1>; + reset-names = "ahci"; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + }; + + sata_phy: sata-phy@8100 { + compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3"; + reg = <0x8100 0x1e00>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; }; /* Legacy UBUS base */ diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index f9dd342cc2ae..21479b4ce823 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958522ER)"; compatible = "brcm,bcm58522", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index 374508a9cfbf..cda3d790965b 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958525ER)"; compatible = "brcm,bcm58525", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index 403250c5ad8e..f86649812b59 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus XMC (BCM958525xmc)"; compatible = "brcm,bcm58525", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index ecd05e26c262..df60602b054d 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958622HR)"; compatible = "brcm,bcm58622", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index f5e85b301497..3893e7af343a 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958623HR)"; compatible = "brcm,bcm58623", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index a53a2f629d74..cf226b02141f 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM958625HR)"; compatible = "brcm,bcm58625", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 3ea5f739e90b..10b3d512bb33 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -38,11 +38,6 @@ model = "NorthStar Plus SVK (BCM958625K)"; compatible = "brcm,bcm58625", "brcm,nsp"; - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index c61673638fa8..8dca97eeaf57 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -41,3 +41,11 @@ brcm,nand-oob-sectors-size = <16>; }; }; + +&ahci { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index ea9a0806b446..e39db14d805e 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -39,10 +39,6 @@ model = "NorthStar Plus SVK (BCM988312HR)"; compatible = "brcm,bcm88312", "brcm,nsp"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 7e18147dc563..0d6f8647cc91 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -214,7 +214,7 @@ &atl { assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_clkctrl DRA7_ATL_CLKCTRL 26>, + <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>, <&dpll_abe_ck>, <&dpll_abe_m2x2_ck>, <&atl_clkin2_ck>; @@ -232,7 +232,7 @@ &mcasp3 { #sound-dai-cells = <0>; - assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; + assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&atl_clkin2_ck>; status = "okay"; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi new file mode 100644 index 000000000000..bb45cb7fc3b6 --- /dev/null +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -0,0 +1,4600 @@ +&l4_cfg { /* 0x4a000000 */ + compatible = "ti,dra7-l4-cfg", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x100000>, /* segment 0 */ + <0x00100000 0x4a100000 0x100000>, /* segment 1 */ + <0x00200000 0x4a200000 0x100000>; /* segment 2 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x001000>, /* ap 2 */ + <0x00002000 0x00002000 0x002000>, /* ap 3 */ + <0x00004000 0x00004000 0x001000>, /* ap 4 */ + <0x00005000 0x00005000 0x001000>, /* ap 5 */ + <0x00006000 0x00006000 0x001000>, /* ap 6 */ + <0x00008000 0x00008000 0x002000>, /* ap 7 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 8 */ + <0x00056000 0x00056000 0x001000>, /* ap 9 */ + <0x00057000 0x00057000 0x001000>, /* ap 10 */ + <0x0005e000 0x0005e000 0x002000>, /* ap 11 */ + <0x00060000 0x00060000 0x001000>, /* ap 12 */ + <0x00080000 0x00080000 0x008000>, /* ap 13 */ + <0x00088000 0x00088000 0x001000>, /* ap 14 */ + <0x000a0000 0x000a0000 0x008000>, /* ap 15 */ + <0x000a8000 0x000a8000 0x001000>, /* ap 16 */ + <0x000d9000 0x000d9000 0x001000>, /* ap 17 */ + <0x000da000 0x000da000 0x001000>, /* ap 18 */ + <0x000dd000 0x000dd000 0x001000>, /* ap 19 */ + <0x000de000 0x000de000 0x001000>, /* ap 20 */ + <0x000e0000 0x000e0000 0x001000>, /* ap 21 */ + <0x000e1000 0x000e1000 0x001000>, /* ap 22 */ + <0x000f4000 0x000f4000 0x001000>, /* ap 23 */ + <0x000f5000 0x000f5000 0x001000>, /* ap 24 */ + <0x000f6000 0x000f6000 0x001000>, /* ap 25 */ + <0x000f7000 0x000f7000 0x001000>, /* ap 26 */ + <0x00090000 0x00090000 0x008000>, /* ap 59 */ + <0x00098000 0x00098000 0x001000>; /* ap 60 */ + + target-module@2000 { /* 0x4a002000, ap 3 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x2000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + scm: scm@0 { + compatible = "ti,dra7-scm-core", "simple-bus"; + reg = <0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + scm_conf: scm_conf@0 { + compatible = "syscon", "simple-bus"; + reg = <0x0 0x1400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x1400>; + + pbias_regulator: pbias_regulator@e00 { + compatible = "ti,pbias-dra7", "ti,pbias-omap"; + reg = <0xe00 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + + scm_conf_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + phy_sel: cpsw-phy-sel@554 { + compatible = "ti,dra7xx-cpsw-phy-sel"; + reg= <0x554 0x4>; + reg-names = "gmii-sel"; + }; + + dra7_pmx_core: pinmux@1400 { + compatible = "ti,dra7-padconf", + "pinctrl-single"; + reg = <0x1400 0x0468>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x3fffffff>; + }; + + scm_conf1: scm_conf@1c04 { + compatible = "syscon"; + reg = <0x1c04 0x0020>; + #syscon-cells = <2>; + }; + + scm_conf_pcie: scm_conf@1c24 { + compatible = "syscon"; + reg = <0x1c24 0x0024>; + }; + + sdma_xbar: dma-router@b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0xb78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; + }; + + edma_xbar: dma-router@c78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0xc78 0x7c>; + #dma-cells = <2>; + dma-requests = <204>; + ti,dma-safe-map = <0>; + dma-masters = <&edma>; + }; + }; + }; + + target-module@5000 { /* 0x4a005000, ap 5 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5000 0x1000>; + + cm_core_aon: cm_core_aon@0 { + compatible = "ti,dra7-cm-core-aon", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x2000>; + ranges = <0 0 0x2000>; + + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_aon_clockdomains: clockdomains { + }; + }; + }; + + target-module@8000 { /* 0x4a008000, ap 7 0e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x8000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x2000>; + + cm_core: cm_core@0 { + compatible = "ti,dra7-cm-core", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x3000>; + ranges = <0 0 0x3000>; + + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_clockdomains: clockdomains { + }; + }; + }; + + target-module@56000 { /* 0x4a056000, ap 9 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "dma_system"; + reg = <0x56000 0x4>, + <0x5602c 0x4>, + <0x56028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): core_pwrdm, dma_clkdm */ + clocks = <&dma_clkctrl DRA7_DMA_DMA_SYSTEM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap4430-sdma"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + }; + + target-module@5e000 { /* 0x4a05e000, ap 11 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x2000>; + }; + + target-module@80000 { /* 0x4a080000, ap 13 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp1"; + reg = <0x80000 0x4>, + <0x80010 0x4>, + <0x80014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x8000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x8000>; + reg = <0x0 0x20>; + + usb2_phy1: phy@4000 { + compatible = "ti,dra7x-usb2", "ti,omap-usb2"; + reg = <0x4000 0x400>; + syscon-phy-power = <&scm_conf 0x300>; + clocks = <&usb_phy1_always_on_clk32k>, + <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb2_phy2: phy@5000 { + compatible = "ti,dra7x-usb2-phy2", + "ti,omap-usb2"; + reg = <0x5000 0x400>; + syscon-phy-power = <&scm_conf 0xe74>; + clocks = <&usb_phy2_always_on_clk32k>, + <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb3_phy1: phy@4400 { + compatible = "ti,omap-usb3"; + reg = <0x4400 0x80>, + <0x4800 0x64>, + <0x4c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x370>; + clocks = <&usb_phy3_always_on_clk32k>, + <&sys_clkin1>, + <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; + clock-names = "wkupclk", + "sysclk", + "refclk"; + #phy-cells = <0>; + }; + }; + }; + + target-module@90000 { /* 0x4a090000, ap 59 42.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp3"; + reg = <0x90000 0x4>, + <0x90010 0x4>, + <0x90014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x8000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x8000>; + reg = <0x0 0x20>; + + pcie1_phy: pciephy@4000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x4000 0x80>, /* phy_rx */ + <0x4400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + syscon-phy-power = <&scm_conf_pcie 0x1c>; + syscon-pcs = <&scm_conf_pcie 0x10>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 8>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>, + <&optfclk_pciephy_div>, + <&sys_clkin1>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div", "sysclk"; + #phy-cells = <0>; + }; + + pcie2_phy: pciephy@5000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x5000 0x80>, /* phy_rx */ + <0x5400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + syscon-phy-power = <&scm_conf_pcie 0x20>; + syscon-pcs = <&scm_conf_pcie 0x10>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 8>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>, + <&optfclk_pciephy_div>, + <&sys_clkin1>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div", "sysclk"; + #phy-cells = <0>; + status = "disabled"; + }; + + sata_phy: phy@6000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x6000 0x80>, /* phy_rx */ + <0x6400 0x64>, /* phy_tx */ + <0x6800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x374>; + clocks = <&sys_clkin1>, + <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; + clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; + #phy-cells = <0>; + }; + }; + }; + + target-module@a0000 { /* 0x4a0a0000, ap 15 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x8000>; + }; + + target-module@d9000 { /* 0x4a0d9000, ap 17 72.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_mpu"; + reg = <0xd9038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */ + clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd9000 0x1000>; + + /* SmartReflex child device marked reserved in TRM */ + }; + + target-module@dd000 { /* 0x4a0dd000, ap 19 18.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_core"; + reg = <0xdd038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */ + clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xdd000 0x1000>; + + /* SmartReflex child device marked reserved in TRM */ + }; + + target-module@e0000 { /* 0x4a0e0000, ap 21 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe0000 0x1000>; + }; + + target-module@f4000 { /* 0x4a0f4000, ap 23 04.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox1"; + reg = <0xf4000 0x4>, + <0xf4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf4000 0x1000>; + + mailbox1: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + status = "disabled"; + }; + }; + + target-module@f6000 { /* 0x4a0f6000, ap 25 78.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0xf6000 0x4>, + <0xf6010 0x4>, + <0xf6014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf6000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x4a100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00002000 0x00102000 0x001000>, /* ap 27 */ + <0x00003000 0x00103000 0x001000>, /* ap 28 */ + <0x00008000 0x00108000 0x001000>, /* ap 29 */ + <0x00009000 0x00109000 0x001000>, /* ap 30 */ + <0x00040000 0x00140000 0x010000>, /* ap 31 */ + <0x00050000 0x00150000 0x001000>, /* ap 32 */ + <0x00051000 0x00151000 0x001000>, /* ap 33 */ + <0x00052000 0x00152000 0x001000>, /* ap 34 */ + <0x00053000 0x00153000 0x001000>, /* ap 35 */ + <0x00054000 0x00154000 0x001000>, /* ap 36 */ + <0x00055000 0x00155000 0x001000>, /* ap 37 */ + <0x00056000 0x00156000 0x001000>, /* ap 38 */ + <0x00057000 0x00157000 0x001000>, /* ap 39 */ + <0x00058000 0x00158000 0x001000>, /* ap 40 */ + <0x0005b000 0x0015b000 0x001000>, /* ap 41 */ + <0x0005c000 0x0015c000 0x001000>, /* ap 42 */ + <0x0005d000 0x0015d000 0x001000>, /* ap 45 */ + <0x0005e000 0x0015e000 0x001000>, /* ap 46 */ + <0x0005f000 0x0015f000 0x001000>, /* ap 47 */ + <0x00060000 0x00160000 0x001000>, /* ap 48 */ + <0x00061000 0x00161000 0x001000>, /* ap 49 */ + <0x00062000 0x00162000 0x001000>, /* ap 50 */ + <0x00063000 0x00163000 0x001000>, /* ap 51 */ + <0x00064000 0x00164000 0x001000>, /* ap 52 */ + <0x00065000 0x00165000 0x001000>, /* ap 53 */ + <0x00066000 0x00166000 0x001000>, /* ap 54 */ + <0x00067000 0x00167000 0x001000>, /* ap 55 */ + <0x00068000 0x00168000 0x001000>, /* ap 56 */ + <0x0006d000 0x0016d000 0x001000>, /* ap 57 */ + <0x0006e000 0x0016e000 0x001000>, /* ap 58 */ + <0x00071000 0x00171000 0x001000>, /* ap 61 */ + <0x00072000 0x00172000 0x001000>, /* ap 62 */ + <0x00073000 0x00173000 0x001000>, /* ap 63 */ + <0x00074000 0x00174000 0x001000>, /* ap 64 */ + <0x00075000 0x00175000 0x001000>, /* ap 65 */ + <0x00076000 0x00176000 0x001000>, /* ap 66 */ + <0x00077000 0x00177000 0x001000>, /* ap 67 */ + <0x00078000 0x00178000 0x001000>, /* ap 68 */ + <0x00081000 0x00181000 0x001000>, /* ap 69 */ + <0x00082000 0x00182000 0x001000>, /* ap 70 */ + <0x00083000 0x00183000 0x001000>, /* ap 71 */ + <0x00084000 0x00184000 0x001000>, /* ap 72 */ + <0x00085000 0x00185000 0x001000>, /* ap 73 */ + <0x00086000 0x00186000 0x001000>, /* ap 74 */ + <0x00087000 0x00187000 0x001000>, /* ap 75 */ + <0x00088000 0x00188000 0x001000>, /* ap 76 */ + <0x00069000 0x00169000 0x001000>, /* ap 103 */ + <0x0006a000 0x0016a000 0x001000>, /* ap 104 */ + <0x00079000 0x00179000 0x001000>, /* ap 105 */ + <0x0007a000 0x0017a000 0x001000>, /* ap 106 */ + <0x0006b000 0x0016b000 0x001000>, /* ap 107 */ + <0x0006c000 0x0016c000 0x001000>, /* ap 108 */ + <0x0007b000 0x0017b000 0x001000>, /* ap 121 */ + <0x0007c000 0x0017c000 0x001000>, /* ap 122 */ + <0x0007d000 0x0017d000 0x001000>, /* ap 123 */ + <0x0007e000 0x0017e000 0x001000>, /* ap 124 */ + <0x00059000 0x00159000 0x001000>, /* ap 125 */ + <0x0005a000 0x0015a000 0x001000>; /* ap 126 */ + + target-module@2000 { /* 0x4a102000, ap 27 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@8000 { /* 0x4a108000, ap 29 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@40000 { /* 0x4a140000, ap 31 06.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x10000>; + }; + + target-module@51000 { /* 0x4a151000, ap 33 50.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x51000 0x1000>; + }; + + target-module@53000 { /* 0x4a153000, ap 35 54.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53000 0x1000>; + }; + + target-module@55000 { /* 0x4a155000, ap 37 46.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + }; + + target-module@57000 { /* 0x4a157000, ap 39 58.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + }; + + target-module@59000 { /* 0x4a159000, ap 125 6a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + }; + + target-module@5b000 { /* 0x4a15b000, ap 41 60.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + }; + + target-module@5d000 { /* 0x4a15d000, ap 45 3a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + }; + + target-module@5f000 { /* 0x4a15f000, ap 47 56.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5f000 0x1000>; + }; + + target-module@61000 { /* 0x4a161000, ap 49 32.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x61000 0x1000>; + }; + + target-module@63000 { /* 0x4a163000, ap 51 5c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x63000 0x1000>; + }; + + target-module@65000 { /* 0x4a165000, ap 53 4e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x65000 0x1000>; + }; + + target-module@67000 { /* 0x4a167000, ap 55 5e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x67000 0x1000>; + }; + + target-module@69000 { /* 0x4a169000, ap 103 4a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x69000 0x1000>; + }; + + target-module@6b000 { /* 0x4a16b000, ap 107 52.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6b000 0x1000>; + }; + + target-module@6d000 { /* 0x4a16d000, ap 57 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6d000 0x1000>; + }; + + target-module@71000 { /* 0x4a171000, ap 61 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x71000 0x1000>; + }; + + target-module@73000 { /* 0x4a173000, ap 63 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x73000 0x1000>; + }; + + target-module@75000 { /* 0x4a175000, ap 65 64.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x75000 0x1000>; + }; + + target-module@77000 { /* 0x4a177000, ap 67 66.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x77000 0x1000>; + }; + + target-module@79000 { /* 0x4a179000, ap 105 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x79000 0x1000>; + }; + + target-module@7b000 { /* 0x4a17b000, ap 121 7c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7b000 0x1000>; + }; + + target-module@7d000 { /* 0x4a17d000, ap 123 7e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7d000 0x1000>; + }; + + target-module@81000 { /* 0x4a181000, ap 69 26.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x81000 0x1000>; + }; + + target-module@83000 { /* 0x4a183000, ap 71 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x83000 0x1000>; + }; + + target-module@85000 { /* 0x4a185000, ap 73 36.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x85000 0x1000>; + }; + + target-module@87000 { /* 0x4a187000, ap 75 74.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x87000 0x1000>; + }; + }; + + segment@200000 { /* 0x4a200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00018000 0x00218000 0x001000>, /* ap 43 */ + <0x00019000 0x00219000 0x001000>, /* ap 44 */ + <0x00000000 0x00200000 0x001000>, /* ap 77 */ + <0x00001000 0x00201000 0x001000>, /* ap 78 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 79 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 80 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 81 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 82 */ + <0x0000e000 0x0020e000 0x001000>, /* ap 83 */ + <0x0000f000 0x0020f000 0x001000>, /* ap 84 */ + <0x00010000 0x00210000 0x001000>, /* ap 85 */ + <0x00011000 0x00211000 0x001000>, /* ap 86 */ + <0x00012000 0x00212000 0x001000>, /* ap 87 */ + <0x00013000 0x00213000 0x001000>, /* ap 88 */ + <0x00014000 0x00214000 0x001000>, /* ap 89 */ + <0x00015000 0x00215000 0x001000>, /* ap 90 */ + <0x0002a000 0x0022a000 0x001000>, /* ap 91 */ + <0x0002b000 0x0022b000 0x001000>, /* ap 92 */ + <0x0001c000 0x0021c000 0x001000>, /* ap 93 */ + <0x0001d000 0x0021d000 0x001000>, /* ap 94 */ + <0x0001e000 0x0021e000 0x001000>, /* ap 95 */ + <0x0001f000 0x0021f000 0x001000>, /* ap 96 */ + <0x00020000 0x00220000 0x001000>, /* ap 97 */ + <0x00021000 0x00221000 0x001000>, /* ap 98 */ + <0x00024000 0x00224000 0x001000>, /* ap 99 */ + <0x00025000 0x00225000 0x001000>, /* ap 100 */ + <0x00026000 0x00226000 0x001000>, /* ap 101 */ + <0x00027000 0x00227000 0x001000>, /* ap 102 */ + <0x0002c000 0x0022c000 0x001000>, /* ap 109 */ + <0x0002d000 0x0022d000 0x001000>, /* ap 110 */ + <0x0002e000 0x0022e000 0x001000>, /* ap 111 */ + <0x0002f000 0x0022f000 0x001000>, /* ap 112 */ + <0x00030000 0x00230000 0x001000>, /* ap 113 */ + <0x00031000 0x00231000 0x001000>, /* ap 114 */ + <0x00032000 0x00232000 0x001000>, /* ap 115 */ + <0x00033000 0x00233000 0x001000>, /* ap 116 */ + <0x00034000 0x00234000 0x001000>, /* ap 117 */ + <0x00035000 0x00235000 0x001000>, /* ap 118 */ + <0x00036000 0x00236000 0x001000>, /* ap 119 */ + <0x00037000 0x00237000 0x001000>, /* ap 120 */ + <0x0001a000 0x0021a000 0x001000>, /* ap 127 */ + <0x0001b000 0x0021b000 0x001000>; /* ap 128 */ + + target-module@0 { /* 0x4a200000, ap 77 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + target-module@a000 { /* 0x4a20a000, ap 79 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@c000 { /* 0x4a20c000, ap 81 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@e000 { /* 0x4a20e000, ap 83 22.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + }; + + target-module@10000 { /* 0x4a210000, ap 85 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@12000 { /* 0x4a212000, ap 87 16.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000 0x1000>; + }; + + target-module@14000 { /* 0x4a214000, ap 89 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@18000 { /* 0x4a218000, ap 43 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x1000>; + }; + + target-module@1a000 { /* 0x4a21a000, ap 127 7a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1a000 0x1000>; + }; + + target-module@1c000 { /* 0x4a21c000, ap 93 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4a21e000, ap 95 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x4a220000, ap 97 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@24000 { /* 0x4a224000, ap 99 44.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + }; + + target-module@26000 { /* 0x4a226000, ap 101 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@2a000 { /* 0x4a22a000, ap 91 4c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + }; + + target-module@2c000 { /* 0x4a22c000, ap 109 6c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2c000 0x1000>; + }; + + target-module@2e000 { /* 0x4a22e000, ap 111 6e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>; + }; + + target-module@30000 { /* 0x4a230000, ap 113 70.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>; + }; + + target-module@32000 { /* 0x4a232000, ap 115 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + }; + + target-module@34000 { /* 0x4a234000, ap 117 76.1 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + }; + + target-module@36000 { /* 0x4a236000, ap 119 62.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + }; +}; + +&l4_per1 { /* 0x48000000 */ + compatible = "ti,dra7-l4-per1", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ + <0x00200000 0x48200000 0x200000>; /* segment 1 */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00020000 0x00020000 0x001000>, /* ap 3 */ + <0x00021000 0x00021000 0x001000>, /* ap 4 */ + <0x00032000 0x00032000 0x001000>, /* ap 5 */ + <0x00033000 0x00033000 0x001000>, /* ap 6 */ + <0x00034000 0x00034000 0x001000>, /* ap 7 */ + <0x00035000 0x00035000 0x001000>, /* ap 8 */ + <0x00036000 0x00036000 0x001000>, /* ap 9 */ + <0x00037000 0x00037000 0x001000>, /* ap 10 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ + <0x00055000 0x00055000 0x001000>, /* ap 13 */ + <0x00056000 0x00056000 0x001000>, /* ap 14 */ + <0x00057000 0x00057000 0x001000>, /* ap 15 */ + <0x00058000 0x00058000 0x001000>, /* ap 16 */ + <0x00059000 0x00059000 0x001000>, /* ap 17 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 18 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 19 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 20 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 21 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 22 */ + <0x00060000 0x00060000 0x001000>, /* ap 23 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 24 */ + <0x0006b000 0x0006b000 0x001000>, /* ap 25 */ + <0x0006c000 0x0006c000 0x001000>, /* ap 26 */ + <0x0006d000 0x0006d000 0x001000>, /* ap 27 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 28 */ + <0x0006f000 0x0006f000 0x001000>, /* ap 29 */ + <0x00070000 0x00070000 0x001000>, /* ap 30 */ + <0x00071000 0x00071000 0x001000>, /* ap 31 */ + <0x00072000 0x00072000 0x001000>, /* ap 32 */ + <0x00073000 0x00073000 0x001000>, /* ap 33 */ + <0x00061000 0x00061000 0x001000>, /* ap 34 */ + <0x00053000 0x00053000 0x001000>, /* ap 35 */ + <0x00054000 0x00054000 0x001000>, /* ap 36 */ + <0x000b2000 0x000b2000 0x001000>, /* ap 37 */ + <0x000b3000 0x000b3000 0x001000>, /* ap 38 */ + <0x00078000 0x00078000 0x001000>, /* ap 39 */ + <0x00079000 0x00079000 0x001000>, /* ap 40 */ + <0x00086000 0x00086000 0x001000>, /* ap 41 */ + <0x00087000 0x00087000 0x001000>, /* ap 42 */ + <0x00088000 0x00088000 0x001000>, /* ap 43 */ + <0x00089000 0x00089000 0x001000>, /* ap 44 */ + <0x00051000 0x00051000 0x001000>, /* ap 45 */ + <0x00052000 0x00052000 0x001000>, /* ap 46 */ + <0x00098000 0x00098000 0x001000>, /* ap 47 */ + <0x00099000 0x00099000 0x001000>, /* ap 48 */ + <0x0009a000 0x0009a000 0x001000>, /* ap 49 */ + <0x0009b000 0x0009b000 0x001000>, /* ap 50 */ + <0x0009c000 0x0009c000 0x001000>, /* ap 51 */ + <0x0009d000 0x0009d000 0x001000>, /* ap 52 */ + <0x00068000 0x00068000 0x001000>, /* ap 53 */ + <0x00069000 0x00069000 0x001000>, /* ap 54 */ + <0x00090000 0x00090000 0x002000>, /* ap 55 */ + <0x00092000 0x00092000 0x001000>, /* ap 56 */ + <0x000a4000 0x000a4000 0x001000>, /* ap 57 */ + <0x000a6000 0x000a6000 0x001000>, /* ap 58 */ + <0x000a8000 0x000a8000 0x004000>, /* ap 59 */ + <0x000ac000 0x000ac000 0x001000>, /* ap 60 */ + <0x000ad000 0x000ad000 0x001000>, /* ap 61 */ + <0x000ae000 0x000ae000 0x001000>, /* ap 62 */ + <0x00066000 0x00066000 0x001000>, /* ap 63 */ + <0x00067000 0x00067000 0x001000>, /* ap 64 */ + <0x000b4000 0x000b4000 0x001000>, /* ap 65 */ + <0x000b5000 0x000b5000 0x001000>, /* ap 66 */ + <0x000b8000 0x000b8000 0x001000>, /* ap 67 */ + <0x000b9000 0x000b9000 0x001000>, /* ap 68 */ + <0x000ba000 0x000ba000 0x001000>, /* ap 69 */ + <0x000bb000 0x000bb000 0x001000>, /* ap 70 */ + <0x000d1000 0x000d1000 0x001000>, /* ap 71 */ + <0x000d2000 0x000d2000 0x001000>, /* ap 72 */ + <0x000d5000 0x000d5000 0x001000>, /* ap 73 */ + <0x000d6000 0x000d6000 0x001000>, /* ap 74 */ + <0x000a2000 0x000a2000 0x001000>, /* ap 75 */ + <0x000a3000 0x000a3000 0x001000>, /* ap 76 */ + <0x00001400 0x00001400 0x000400>, /* ap 77 */ + <0x00001800 0x00001800 0x000400>, /* ap 78 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 79 */ + <0x000a5000 0x000a5000 0x001000>, /* ap 80 */ + <0x0007a000 0x0007a000 0x001000>, /* ap 81 */ + <0x0007b000 0x0007b000 0x001000>, /* ap 82 */ + <0x0007c000 0x0007c000 0x001000>, /* ap 83 */ + <0x0007d000 0x0007d000 0x001000>; /* ap 84 */ + + target-module@20000 { /* 0x48020000, ap 3 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart3: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; + dma-names = "tx", "rx"; + }; + }; + + target-module@32000 { /* 0x48032000, ap 5 3e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@34000 { /* 0x48034000, ap 7 46.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x34000 0x4>, + <0x34010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + + timer3: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@36000 { /* 0x48036000, ap 9 4e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x36000 0x4>, + <0x36010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + + timer4: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@3e000 { /* 0x4803e000, ap 11 56.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer9"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + timer9: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@51000 { /* 0x48051000, ap 45 2e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio7"; + reg = <0x51000 0x4>, + <0x51010 0x4>, + <0x51114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x51000 0x1000>; + + gpio7: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@53000 { /* 0x48053000, ap 35 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio8"; + reg = <0x53000 0x4>, + <0x53010 0x4>, + <0x53114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53000 0x1000>; + + gpio8: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@55000 { /* 0x48055000, ap 13 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x55000 0x4>, + <0x55010 0x4>, + <0x55114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@57000 { /* 0x48057000, ap 15 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0x57000 0x4>, + <0x57010 0x4>, + <0x57114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@59000 { /* 0x48059000, ap 17 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0x59000 0x4>, + <0x59010 0x4>, + <0x59114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio5"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>, + <0x5b114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio6"; + reg = <0x5d000 0x4>, + <0x5d010 0x4>, + <0x5d114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 0>, + <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + gpio6: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@60000 { /* 0x48060000, ap 23 32.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x60000 0x8>, + <0x60010 0x8>, + <0x60090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + i2c3: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@66000 { /* 0x48066000, ap 63 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart5"; + reg = <0x66050 0x4>, + <0x66054 0x4>, + <0x66058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + uart5: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; + dma-names = "tx", "rx"; + }; + }; + + target-module@68000 { /* 0x48068000, ap 53 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart6"; + reg = <0x68050 0x4>, + <0x68054 0x4>, + <0x68058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_UART6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x68000 0x1000>; + + uart6: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; + dma-names = "tx", "rx"; + }; + }; + + target-module@6a000 { /* 0x4806a000, ap 24 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x6a050 0x4>, + <0x6a054 0x4>, + <0x6a058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6a000 0x1000>; + + uart1: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; + dma-names = "tx", "rx"; + }; + }; + + target-module@6c000 { /* 0x4806c000, ap 26 2c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x6c050 0x4>, + <0x6c054 0x4>, + <0x6c058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x1000>; + + uart2: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; + dma-names = "tx", "rx"; + }; + }; + + target-module@6e000 { /* 0x4806e000, ap 28 0c.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0x6e050 0x4>, + <0x6e054 0x4>, + <0x6e058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6e000 0x1000>; + + uart4: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; + dma-names = "tx", "rx"; + }; + }; + + target-module@70000 { /* 0x48070000, ap 30 22.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0x70000 0x8>, + <0x70010 0x8>, + <0x70090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@72000 { /* 0x48072000, ap 32 2a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x72000 0x8>, + <0x72010 0x8>, + <0x72090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x72000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@78000 { /* 0x48078000, ap 39 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "elm"; + reg = <0x78000 0x4>, + <0x78010 0x4>, + <0x78014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x1000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0xfc0>; /* device IO registers */ + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@7a000 { /* 0x4807a000, ap 81 3a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c4"; + reg = <0x7a000 0x8>, + <0x7a010 0x8>, + <0x7a090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_I2C4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7a000 0x1000>; + + i2c4: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@7c000 { /* 0x4807c000, ap 83 4a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c5"; + reg = <0x7c000 0x8>, + <0x7c010 0x8>, + <0x7c090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_I2C5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7c000 0x1000>; + + i2c5: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + target-module@86000 { /* 0x48086000, ap 41 5e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer10"; + reg = <0x86000 0x4>, + <0x86010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + timer10: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@88000 { /* 0x48088000, ap 43 66.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer11"; + reg = <0x88000 0x4>, + <0x88010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x88000 0x1000>; + + timer11: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@90000 { /* 0x48090000, ap 55 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "rng"; + reg = <0x91fe0 0x4>, + <0x91fe4 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_RNG_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x2000>; + + rng: rng@0 { + compatible = "ti,omap4-rng"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + + target-module@98000 { /* 0x48098000, ap 47 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi1"; + reg = <0x98000 0x4>, + <0x98010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x98000 0x1000>; + + mcspi1: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <4>; + dmas = <&sdma_xbar 35>, + <&sdma_xbar 36>, + <&sdma_xbar 37>, + <&sdma_xbar 38>, + <&sdma_xbar 39>, + <&sdma_xbar 40>, + <&sdma_xbar 41>, + <&sdma_xbar 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + status = "disabled"; + }; + }; + + target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi2"; + reg = <0x9a000 0x4>, + <0x9a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9a000 0x1000>; + + mcspi2: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma_xbar 43>, + <&sdma_xbar 44>, + <&sdma_xbar 45>, + <&sdma_xbar 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + }; + + target-module@9c000 { /* 0x4809c000, ap 51 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x9c000 0x4>, + <0x9c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,dra7-sdhci"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + pbias-supply = <&pbias_mmc_reg>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-ddr-3_3v; + }; + }; + + target-module@a2000 { /* 0x480a2000, ap 75 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x480a4000, ap 57 42.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x000a4000 0x00001000>, + <0x00001000 0x000a5000 0x00001000>; + }; + + target-module@a8000 { /* 0x480a8000, ap 59 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x4000>; + }; + + target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc3"; + reg = <0xad000 0x4>, + <0xad010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xad000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,dra7-sdhci"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + /* Errata i887 limits max-frequency of MMC3 to 64 MHz */ + max-frequency = <64000000>; + /* SDMA is not supported */ + sdhci-caps-mask = <0x0 0x400000>; + }; + }; + + target-module@b2000 { /* 0x480b2000, ap 37 52.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hdq1w"; + reg = <0xb2000 0x4>, + <0xb2014 0x4>, + <0xb2018 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + ti,no-reset-on-init; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_HDQ1W_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb2000 0x1000>; + + hdqw1w: 1w@0 { + compatible = "ti,omap3-1w"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@b4000 { /* 0x480b4000, ap 65 40.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xb4000 0x4>, + <0xb4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb4000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,dra7-sdhci"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + max-frequency = <192000000>; + /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */ + sdhci-caps-mask = <0x7 0x0>; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + mmc-ddr-3_3v; + }; + }; + + target-module@b8000 { /* 0x480b8000, ap 67 48.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi3"; + reg = <0xb8000 0x4>, + <0xb8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000 0x1000>; + + mcspi3: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + }; + + target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi4"; + reg = <0xba000 0x4>, + <0xba010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xba000 0x1000>; + + mcspi4: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <1>; + dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; + dma-names = "tx0", "rx0"; + status = "disabled"; + }; + }; + + target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc4"; + reg = <0xd1000 0x4>, + <0xd1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl DRA7_L4PER_MMC4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd1000 0x1000>; + + mmc4: mmc@0 { + compatible = "ti,dra7-sdhci"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + max-frequency = <192000000>; + /* SDMA is not supported */ + sdhci-caps-mask = <0x0 0x400000>; + }; + }; + + target-module@d5000 { /* 0x480d5000, ap 73 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd5000 0x1000>; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&l4_per2 { /* 0x48400000 */ + compatible = "ti,dra7-l4-per2", "simple-bus"; + reg = <0x48400000 0x800>, + <0x48400800 0x800>, + <0x48401000 0x400>, + <0x48401400 0x400>, + <0x48401800 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48400000 0x400000>, /* segment 0 */ + <0x45800000 0x45800000 0x400000>, /* L3 data port */ + <0x45c00000 0x45c00000 0x400000>, /* L3 data port */ + <0x46000000 0x46000000 0x400000>, /* L3 data port */ + <0x48436000 0x48436000 0x400000>, /* L3 data port */ + <0x4843a000 0x4843a000 0x400000>, /* L3 data port */ + <0x4844c000 0x4844c000 0x400000>, /* L3 data port */ + <0x48450000 0x48450000 0x400000>, /* L3 data port */ + <0x48454000 0x48454000 0x400000>; /* L3 data port */ + + segment@0 { /* 0x48400000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00084000 0x00084000 0x004000>, /* ap 3 */ + <0x00001400 0x00001400 0x000400>, /* ap 4 */ + <0x00001800 0x00001800 0x000400>, /* ap 5 */ + <0x00088000 0x00088000 0x001000>, /* ap 6 */ + <0x0002c000 0x0002c000 0x001000>, /* ap 7 */ + <0x0002d000 0x0002d000 0x001000>, /* ap 8 */ + <0x00060000 0x00060000 0x002000>, /* ap 9 */ + <0x00062000 0x00062000 0x001000>, /* ap 10 */ + <0x00064000 0x00064000 0x002000>, /* ap 11 */ + <0x00066000 0x00066000 0x001000>, /* ap 12 */ + <0x00068000 0x00068000 0x002000>, /* ap 13 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 14 */ + <0x0006c000 0x0006c000 0x002000>, /* ap 15 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 16 */ + <0x00036000 0x00036000 0x001000>, /* ap 17 */ + <0x00037000 0x00037000 0x001000>, /* ap 18 */ + <0x00070000 0x00070000 0x002000>, /* ap 19 */ + <0x00072000 0x00072000 0x001000>, /* ap 20 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 21 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 22 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 23 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 24 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 25 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 26 */ + <0x00040000 0x00040000 0x001000>, /* ap 27 */ + <0x00041000 0x00041000 0x001000>, /* ap 28 */ + <0x00042000 0x00042000 0x001000>, /* ap 29 */ + <0x00043000 0x00043000 0x001000>, /* ap 30 */ + <0x00080000 0x00080000 0x002000>, /* ap 31 */ + <0x00082000 0x00082000 0x001000>, /* ap 32 */ + <0x0004a000 0x0004a000 0x001000>, /* ap 33 */ + <0x0004b000 0x0004b000 0x001000>, /* ap 34 */ + <0x00074000 0x00074000 0x002000>, /* ap 35 */ + <0x00076000 0x00076000 0x001000>, /* ap 36 */ + <0x00050000 0x00050000 0x001000>, /* ap 37 */ + <0x00051000 0x00051000 0x001000>, /* ap 38 */ + <0x00078000 0x00078000 0x002000>, /* ap 39 */ + <0x0007a000 0x0007a000 0x001000>, /* ap 40 */ + <0x00054000 0x00054000 0x001000>, /* ap 41 */ + <0x00055000 0x00055000 0x001000>, /* ap 42 */ + <0x0007c000 0x0007c000 0x002000>, /* ap 43 */ + <0x0007e000 0x0007e000 0x001000>, /* ap 44 */ + <0x0004c000 0x0004c000 0x001000>, /* ap 45 */ + <0x0004d000 0x0004d000 0x001000>, /* ap 46 */ + <0x00020000 0x00020000 0x001000>, /* ap 47 */ + <0x00021000 0x00021000 0x001000>, /* ap 48 */ + <0x00022000 0x00022000 0x001000>, /* ap 49 */ + <0x00023000 0x00023000 0x001000>, /* ap 50 */ + <0x00024000 0x00024000 0x001000>, /* ap 51 */ + <0x00025000 0x00025000 0x001000>, /* ap 52 */ + <0x00046000 0x00046000 0x001000>, /* ap 53 */ + <0x00047000 0x00047000 0x001000>, /* ap 54 */ + <0x00048000 0x00048000 0x001000>, /* ap 55 */ + <0x00049000 0x00049000 0x001000>, /* ap 56 */ + <0x00058000 0x00058000 0x002000>, /* ap 57 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 58 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 59 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 60 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 61 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 62 */ + <0x45800000 0x45800000 0x400000>, /* L3 data port */ + <0x45c00000 0x45c00000 0x400000>, /* L3 data port */ + <0x46000000 0x46000000 0x400000>, /* L3 data port */ + <0x48436000 0x48436000 0x400000>, /* L3 data port */ + <0x4843a000 0x4843a000 0x400000>, /* L3 data port */ + <0x4844c000 0x4844c000 0x400000>, /* L3 data port */ + <0x48450000 0x48450000 0x400000>, /* L3 data port */ + <0x48454000 0x48454000 0x400000>; /* L3 data port */ + + target-module@20000 { /* 0x48420000, ap 47 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart7"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_UART7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart7: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + }; + }; + + target-module@22000 { /* 0x48422000, ap 49 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart8"; + reg = <0x22050 0x4>, + <0x22054 0x4>, + <0x22058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_UART8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + uart8: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x48424000, ap 51 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart9"; + reg = <0x24050 0x4>, + <0x24054 0x4>, + <0x24058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_UART9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + uart9: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + }; + }; + + target-module@2c000 { /* 0x4842c000, ap 7 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2c000 0x1000>; + }; + + target-module@36000 { /* 0x48436000, ap 17 06.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@3a000 { /* 0x4843a000, ap 21 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>; + }; + + target-module@3c000 { /* 0x4843c000, ap 23 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x3c000 0x4>; + reg-names = "rev"; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>; + + atl: atl@0 { + compatible = "ti,dra7-atl"; + reg = <0x0 0x3ff>; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + target-module@3e000 { /* 0x4843e000, ap 25 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss0"; + reg = <0x3e000 0x4>, + <0x3e004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + epwmss0: epwmss@0 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x0 0x30>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap0: ecap@100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm0: pwm@200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@40000 { /* 0x48440000, ap 27 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss1"; + reg = <0x40000 0x4>, + <0x40004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + epwmss1: epwmss@0 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x0 0x30>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap1: ecap@100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm1: pwm@200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@42000 { /* 0x48442000, ap 29 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "epwmss2"; + reg = <0x42000 0x4>, + <0x42004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + + epwmss2: epwmss@0 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x0 0x30>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0 0 0x1000>; + + ecap2: ecap@100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + + ehrpwm2: pwm@200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x200 0x80>; + clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + }; + }; + + target-module@46000 { /* 0x48446000, ap 53 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + }; + + target-module@48000 { /* 0x48448000, ap 55 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48000 0x1000>; + }; + + target-module@4a000 { /* 0x4844a000, ap 33 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4a000 0x1000>; + }; + + target-module@4c000 { /* 0x4844c000, ap 45 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x1000>; + }; + + target-module@50000 { /* 0x48450000, ap 37 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x50000 0x1000>; + }; + + target-module@54000 { /* 0x48454000, ap 41 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54000 0x1000>; + }; + + target-module@58000 { /* 0x48458000, ap 57 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58000 0x2000>; + }; + + target-module@5b000 { /* 0x4845b000, ap 59 46.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + }; + + target-module@5d000 { /* 0x4845d000, ap 61 22.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + }; + + target-module@60000 { /* 0x48460000, ap 9 0e.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp1"; + reg = <0x60000 0x4>, + <0x60004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x2000>, + <0x45800000 0x45800000 0x400000>; + + mcasp1: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x45800000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; + dma-names = "tx", "rx"; + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + status = "disabled"; + }; + }; + + target-module@64000 { /* 0x48464000, ap 11 1e.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp2"; + reg = <0x64000 0x4>, + <0x64004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x2000>, + <0x45c00000 0x45c00000 0x400000>; + + mcasp2: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x45c00000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + status = "disabled"; + }; + }; + + target-module@68000 { /* 0x48468000, ap 13 26.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp3"; + reg = <0x68000 0x4>, + <0x68004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x68000 0x2000>, + <0x46000000 0x46000000 0x400000>; + + mcasp3: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x46000000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@6c000 { /* 0x4846c000, ap 15 2e.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp4"; + reg = <0x6c000 0x4>, + <0x6c004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x2000>, + <0x48436000 0x48436000 0x400000>; + + mcasp4: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x48436000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@70000 { /* 0x48470000, ap 19 36.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp5"; + reg = <0x70000 0x4>, + <0x70004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x2000>, + <0x4843a000 0x4843a000 0x400000>; + + mcasp5: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x4843a000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@74000 { /* 0x48474000, ap 35 14.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp6"; + reg = <0x74000 0x4>, + <0x74004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x74000 0x2000>, + <0x4844c000 0x4844c000 0x400000>; + + mcasp6: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x4844c000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@78000 { /* 0x48478000, ap 39 0c.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp7"; + reg = <0x78000 0x4>, + <0x78004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x2000>, + <0x48450000 0x48450000 0x400000>; + + mcasp7: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x48450000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@7c000 { /* 0x4847c000, ap 43 04.0 */ + compatible = "ti,sysc-dra7-mcasp", "ti,sysc"; + ti,hwmods = "mcasp8"; + reg = <0x7c000 0x4>, + <0x7c004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; + clock-names = "fck", "ahclkx", "ahclkr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7c000 0x2000>, + <0x48454000 0x48454000 0x400000>; + + mcasp8: mcasp@0 { + compatible = "ti,dra7-mcasp-audio"; + reg = <0x0 0x2000>, + <0x48454000 0x1000>; /* L3 data port */ + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; + dma-names = "tx", "rx"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; + status = "disabled"; + }; + }; + + target-module@80000 { /* 0x48480000, ap 31 16.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x80000 0x4>; + reg-names = "rev"; + clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x2000>; + + dcan2: can@0 { + compatible = "ti,dra7-d_can"; + reg = <0x0 0x2000>; + syscon-raminit = <&scm_conf 0x558 1>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clkin1>; + status = "disabled"; + }; + }; + + target-module@84000 { /* 0x48484000, ap 3 10.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "gmac"; + reg = <0x85200 0x4>, + <0x85208 0x4>, + <0x85204 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x84000 0x4000>; + /* + * Do not allow gating of cpsw clock as workaround + * for errata i877. Keeping internal clock disabled + * causes the device switching characteristics + * to degrade over time and eventually fail to meet + * the data manual delay time/skew specs. + */ + ti,no-idle; + + mac: ethernet@0 { + compatible = "ti,dra7-cpsw","ti,cpsw"; + clocks = <&gmac_main_clk>, <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x784CFE14>; + cpts_clock_shift = <29>; + reg = <0x0 0x1000 + 0x1200 0x2e00>; + #address-cells = <1>; + #size-cells = <1>; + + /* + * rx_thresh_pend + * rx_pend + * tx_pend + * misc_pend + */ + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0 0x4000>; + syscon = <&scm_conf>; + cpsw-phy-sel = <&phy_sel>; + status = "disabled"; + + davinci_mdio: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + }; + + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + }; + }; +}; + +&l4_per3 { /* 0x48800000 */ + compatible = "ti,dra7-l4-per3", "simple-bus"; + reg = <0x48800000 0x800>, + <0x48800800 0x800>, + <0x48801000 0x400>, + <0x48801400 0x400>, + <0x48801800 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48800000 0x200000>; /* segment 0 */ + + segment@0 { /* 0x48800000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00000800 0x00000800 0x000800>, /* ap 1 */ + <0x00001000 0x00001000 0x000400>, /* ap 2 */ + <0x00001400 0x00001400 0x000400>, /* ap 3 */ + <0x00001800 0x00001800 0x000400>, /* ap 4 */ + <0x00020000 0x00020000 0x001000>, /* ap 5 */ + <0x00021000 0x00021000 0x001000>, /* ap 6 */ + <0x00022000 0x00022000 0x001000>, /* ap 7 */ + <0x00023000 0x00023000 0x001000>, /* ap 8 */ + <0x00024000 0x00024000 0x001000>, /* ap 9 */ + <0x00025000 0x00025000 0x001000>, /* ap 10 */ + <0x00026000 0x00026000 0x001000>, /* ap 11 */ + <0x00027000 0x00027000 0x001000>, /* ap 12 */ + <0x00028000 0x00028000 0x001000>, /* ap 13 */ + <0x00029000 0x00029000 0x001000>, /* ap 14 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 15 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 16 */ + <0x0002c000 0x0002c000 0x001000>, /* ap 17 */ + <0x0002d000 0x0002d000 0x001000>, /* ap 18 */ + <0x0002e000 0x0002e000 0x001000>, /* ap 19 */ + <0x0002f000 0x0002f000 0x001000>, /* ap 20 */ + <0x00170000 0x00170000 0x010000>, /* ap 21 */ + <0x00180000 0x00180000 0x001000>, /* ap 22 */ + <0x00190000 0x00190000 0x010000>, /* ap 23 */ + <0x001a0000 0x001a0000 0x001000>, /* ap 24 */ + <0x001b0000 0x001b0000 0x010000>, /* ap 25 */ + <0x001c0000 0x001c0000 0x001000>, /* ap 26 */ + <0x001d0000 0x001d0000 0x010000>, /* ap 27 */ + <0x001e0000 0x001e0000 0x001000>, /* ap 28 */ + <0x00038000 0x00038000 0x001000>, /* ap 29 */ + <0x00039000 0x00039000 0x001000>, /* ap 30 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 31 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 32 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 33 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 34 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 35 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 36 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 37 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 38 */ + <0x00040000 0x00040000 0x001000>, /* ap 39 */ + <0x00041000 0x00041000 0x001000>, /* ap 40 */ + <0x00042000 0x00042000 0x001000>, /* ap 41 */ + <0x00043000 0x00043000 0x001000>, /* ap 42 */ + <0x00044000 0x00044000 0x001000>, /* ap 43 */ + <0x00045000 0x00045000 0x001000>, /* ap 44 */ + <0x00046000 0x00046000 0x001000>, /* ap 45 */ + <0x00047000 0x00047000 0x001000>, /* ap 46 */ + <0x00048000 0x00048000 0x001000>, /* ap 47 */ + <0x00049000 0x00049000 0x001000>, /* ap 48 */ + <0x0004a000 0x0004a000 0x001000>, /* ap 49 */ + <0x0004b000 0x0004b000 0x001000>, /* ap 50 */ + <0x0004c000 0x0004c000 0x001000>, /* ap 51 */ + <0x0004d000 0x0004d000 0x001000>, /* ap 52 */ + <0x0004e000 0x0004e000 0x001000>, /* ap 53 */ + <0x0004f000 0x0004f000 0x001000>, /* ap 54 */ + <0x00050000 0x00050000 0x001000>, /* ap 55 */ + <0x00051000 0x00051000 0x001000>, /* ap 56 */ + <0x00052000 0x00052000 0x001000>, /* ap 57 */ + <0x00053000 0x00053000 0x001000>, /* ap 58 */ + <0x00054000 0x00054000 0x001000>, /* ap 59 */ + <0x00055000 0x00055000 0x001000>, /* ap 60 */ + <0x00056000 0x00056000 0x001000>, /* ap 61 */ + <0x00057000 0x00057000 0x001000>, /* ap 62 */ + <0x00058000 0x00058000 0x001000>, /* ap 63 */ + <0x00059000 0x00059000 0x001000>, /* ap 64 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 65 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 66 */ + <0x00064000 0x00064000 0x001000>, /* ap 67 */ + <0x00065000 0x00065000 0x001000>, /* ap 68 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 69 */ + <0x0005f000 0x0005f000 0x001000>, /* ap 70 */ + <0x00060000 0x00060000 0x001000>, /* ap 71 */ + <0x00061000 0x00061000 0x001000>, /* ap 72 */ + <0x00062000 0x00062000 0x001000>, /* ap 73 */ + <0x00063000 0x00063000 0x001000>, /* ap 74 */ + <0x00140000 0x00140000 0x020000>, /* ap 75 */ + <0x00160000 0x00160000 0x001000>, /* ap 76 */ + <0x00016000 0x00016000 0x001000>, /* ap 77 */ + <0x00017000 0x00017000 0x001000>, /* ap 78 */ + <0x000c0000 0x000c0000 0x020000>, /* ap 79 */ + <0x000e0000 0x000e0000 0x001000>, /* ap 80 */ + <0x00004000 0x00004000 0x001000>, /* ap 81 */ + <0x00005000 0x00005000 0x001000>, /* ap 82 */ + <0x00080000 0x00080000 0x020000>, /* ap 83 */ + <0x000a0000 0x000a0000 0x001000>, /* ap 84 */ + <0x00100000 0x00100000 0x020000>, /* ap 85 */ + <0x00120000 0x00120000 0x001000>, /* ap 86 */ + <0x00010000 0x00010000 0x001000>, /* ap 87 */ + <0x00011000 0x00011000 0x001000>, /* ap 88 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 89 */ + <0x0000b000 0x0000b000 0x001000>, /* ap 90 */ + <0x0001c000 0x0001c000 0x001000>, /* ap 91 */ + <0x0001d000 0x0001d000 0x001000>, /* ap 92 */ + <0x0001e000 0x0001e000 0x001000>, /* ap 93 */ + <0x0001f000 0x0001f000 0x001000>, /* ap 94 */ + <0x00002000 0x00002000 0x001000>, /* ap 95 */ + <0x00003000 0x00003000 0x001000>; /* ap 96 */ + + target-module@2000 { /* 0x48802000, ap 95 7c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox13"; + reg = <0x2000 0x4>, + <0x2010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX13_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + mailbox13: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@4000 { /* 0x48804000, ap 81 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@a000 { /* 0x4880a000, ap 89 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@10000 { /* 0x48810000, ap 87 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@16000 { /* 0x48816000, ap 77 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@1c000 { /* 0x4881c000, ap 91 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4881e000, ap 93 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x48820000, ap 5 08.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x20000 0x4>, + <0x20010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + timer5: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@22000 { /* 0x48822000, ap 7 24.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x22000 0x4>, + <0x22010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + + timer6: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@24000 { /* 0x48824000, ap 9 26.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x24000 0x4>, + <0x24010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + timer7: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@26000 { /* 0x48826000, ap 11 0c.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer8"; + reg = <0x26000 0x4>, + <0x26010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): ipu_pwrdm, ipu_clkdm */ + clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + + timer8: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@28000 { /* 0x48828000, ap 13 16.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer13"; + reg = <0x28000 0x4>, + <0x28010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */ + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + + timer13: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@2a000 { /* 0x4882a000, ap 15 10.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer14"; + reg = <0x2a000 0x4>, + <0x2a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */ + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + + timer14: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@2c000 { /* 0x4882c000, ap 17 02.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer15"; + reg = <0x2c000 0x4>, + <0x2c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */ + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2c000 0x1000>; + + timer15: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@2e000 { /* 0x4882e000, ap 19 14.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer16"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l4per_pwrdm, l4per3_clkdm */ + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>; + + timer16: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@38000 { /* 0x48838000, ap 29 12.0 */ + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + ti,hwmods = "rtcss"; + reg = <0x38074 0x4>, + <0x38078 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): rtc_pwrdm, rtc_clkdm */ + clocks = <&rtc_clkctrl DRA7_RTC_RTCSS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>; + + rtc: rtc@0 { + compatible = "ti,am3352-rtc"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_32k_ck>; + }; + }; + + target-module@3a000 { /* 0x4883a000, ap 33 3e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox2"; + reg = <0x3a000 0x4>, + <0x3a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>; + + mailbox2: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@3c000 { /* 0x4883c000, ap 35 3a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox3"; + reg = <0x3c000 0x4>, + <0x3c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>; + + mailbox3: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@3e000 { /* 0x4883e000, ap 37 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox4"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + mailbox4: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@40000 { /* 0x48840000, ap 39 64.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox5"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + mailbox5: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@42000 { /* 0x48842000, ap 41 4e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox6"; + reg = <0x42000 0x4>, + <0x42010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42000 0x1000>; + + mailbox6: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@44000 { /* 0x48844000, ap 43 42.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox7"; + reg = <0x44000 0x4>, + <0x44010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x44000 0x1000>; + + mailbox7: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@46000 { /* 0x48846000, ap 45 48.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox8"; + reg = <0x46000 0x4>, + <0x46010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x46000 0x1000>; + + mailbox8: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@48000 { /* 0x48848000, ap 47 36.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x48000 0x1000>; + }; + + target-module@4a000 { /* 0x4884a000, ap 49 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4a000 0x1000>; + }; + + target-module@4c000 { /* 0x4884c000, ap 51 44.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000 0x1000>; + }; + + target-module@4e000 { /* 0x4884e000, ap 53 4c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4e000 0x1000>; + }; + + target-module@50000 { /* 0x48850000, ap 55 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x50000 0x1000>; + }; + + target-module@52000 { /* 0x48852000, ap 57 54.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x52000 0x1000>; + }; + + target-module@54000 { /* 0x48854000, ap 59 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54000 0x1000>; + }; + + target-module@56000 { /* 0x48856000, ap 61 22.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + }; + + target-module@58000 { /* 0x48858000, ap 63 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58000 0x1000>; + }; + + target-module@5a000 { /* 0x4885a000, ap 65 5c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5a000 0x1000>; + }; + + target-module@5c000 { /* 0x4885c000, ap 31 32.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5c000 0x1000>; + }; + + target-module@5e000 { /* 0x4885e000, ap 69 6c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox9"; + reg = <0x5e000 0x4>, + <0x5e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x1000>; + + mailbox9: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@60000 { /* 0x48860000, ap 71 4a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox10"; + reg = <0x60000 0x4>, + <0x60010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + mailbox10: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@62000 { /* 0x48862000, ap 73 74.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox11"; + reg = <0x62000 0x4>, + <0x62010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x62000 0x1000>; + + mailbox11: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@64000 { /* 0x48864000, ap 67 52.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox12"; + reg = <0x64000 0x4>, + <0x64010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX12_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x1000>; + + mailbox12: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + }; + + target-module@80000 { /* 0x48880000, ap 83 0e.1 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x80000 0x4>, + <0x80010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x20000>; + + omap_dwc3_1: omap_dwc3_1@0 { + compatible = "ti,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges = <0 0 0x20000>; + + usb1: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x17000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + }; + + target-module@c0000 { /* 0x488c0000, ap 79 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss2"; + reg = <0xc0000 0x4>, + <0xc0010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x20000>; + + omap_dwc3_2: omap_dwc3_2@0 { + compatible = "ti,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges = <0 0 0x20000>; + + usb2: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x17000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_metastability_quirk; + }; + }; + }; + + target-module@100000 { /* 0x48900000, ap 85 04.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss3"; + reg = <0x100000 0x4>, + <0x100010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x20000>; + + omap_dwc3_3: omap_dwc3_3@0 { + compatible = "ti,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges = <0 0 0x20000>; + status = "disabled"; + + usb3: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x17000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; + }; + }; + }; + + target-module@140000 { /* 0x48940000, ap 75 3c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss4"; + reg = <0x140000 0x4>, + <0x140010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x140000 0x20000>; + }; + + target-module@170000 { /* 0x48970000, ap 21 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x170000 0x10000>; + }; + + target-module@190000 { /* 0x48990000, ap 23 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x190000 0x10000>; + }; + + target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1b0000 0x10000>; + }; + + target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1d0000 0x10000>; + }; + }; +}; + +&l4_wkup { /* 0x4ae00000 */ + compatible = "ti,dra7-l4-wkup", "simple-bus"; + reg = <0x4ae00000 0x800>, + <0x4ae00800 0x800>, + <0x4ae01000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4ae00000 0x010000>, /* segment 0 */ + <0x00010000 0x4ae10000 0x010000>, /* segment 1 */ + <0x00020000 0x4ae20000 0x010000>, /* segment 2 */ + <0x00030000 0x4ae30000 0x010000>; /* segment 3 */ + + segment@0 { /* 0x4ae00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00006000 0x00006000 0x002000>, /* ap 3 */ + <0x00008000 0x00008000 0x001000>, /* ap 4 */ + <0x00004000 0x00004000 0x001000>, /* ap 15 */ + <0x00005000 0x00005000 0x001000>, /* ap 16 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 17 */ + <0x0000d000 0x0000d000 0x001000>; /* ap 18 */ + + target-module@4000 { /* 0x4ae04000, ap 15 40.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x4000 0x4>, + <0x4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x40>; + }; + }; + + target-module@6000 { /* 0x4ae06000, ap 3 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x2000>; + + prm: prm@0 { + compatible = "ti,dra7-prm", "simple-bus"; + reg = <0 0x3000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x3000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + target-module@c000 { /* 0x4ae0c000, ap 17 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xc000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + scm_wkup: scm_conf@0 { + compatible = "syscon"; + reg = <0 0x1000>; + }; + }; + }; + + segment@10000 { /* 0x4ae10000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ + <0x00001000 0x00011000 0x001000>, /* ap 6 */ + <0x00004000 0x00014000 0x001000>, /* ap 7 */ + <0x00005000 0x00015000 0x001000>, /* ap 8 */ + <0x00008000 0x00018000 0x001000>, /* ap 9 */ + <0x00009000 0x00019000 0x001000>, /* ap 10 */ + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ + <0x0000d000 0x0001d000 0x001000>; /* ap 12 */ + + target-module@0 { /* 0x4ae10000, ap 5 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 0>, + <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@4000 { /* 0x4ae14000, ap 7 28.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@8000 { /* 0x4ae18000, ap 9 30.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x8000 0x4>, + <0x8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + }; + + target-module@c000 { /* 0x4ae1c000, ap 11 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + }; + + segment@20000 { /* 0x4ae20000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ + <0x00000000 0x00020000 0x001000>, /* ap 19 */ + <0x00001000 0x00021000 0x001000>, /* ap 20 */ + <0x00002000 0x00022000 0x001000>, /* ap 21 */ + <0x00003000 0x00023000 0x001000>, /* ap 22 */ + <0x00007000 0x00027000 0x000400>, /* ap 23 */ + <0x00008000 0x00028000 0x000800>, /* ap 24 */ + <0x00009000 0x00029000 0x000100>, /* ap 25 */ + <0x00008800 0x00028800 0x000200>, /* ap 26 */ + <0x00008a00 0x00028a00 0x000100>, /* ap 27 */ + <0x0000b000 0x0002b000 0x001000>, /* ap 28 */ + <0x0000c000 0x0002c000 0x001000>, /* ap 29 */ + <0x0000f000 0x0002f000 0x001000>; /* ap 32 */ + + target-module@0 { /* 0x4ae20000, ap 19 08.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer12"; + reg = <0x0 0x4>, + <0x10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER12_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + timer12: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER12_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + ti,timer-secure; + }; + }; + + target-module@2000 { /* 0x4ae22000, ap 21 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@6000 { /* 0x4ae26000, ap 13 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00006000 0x00001000>, + <0x00001000 0x00007000 0x00000400>, + <0x00002000 0x00008000 0x00000800>, + <0x00002800 0x00008800 0x00000200>, + <0x00002a00 0x00008a00 0x00000100>, + <0x00003000 0x00009000 0x00000100>; + }; + + target-module@b000 { /* 0x4ae2b000, ap 28 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart10"; + reg = <0xb050 0x4>, + <0xb054 0x4>, + <0xb058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_UART10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb000 0x1000>; + + uart10: serial@0 { + compatible = "ti,dra742-uart", "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + status = "disabled"; + }; + }; + + target-module@f000 { /* 0x4ae2f000, ap 32 58.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf000 0x1000>; + }; + }; + + segment@30000 { /* 0x4ae30000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0000c000 0x0003c000 0x002000>, /* ap 30 */ + <0x0000e000 0x0003e000 0x001000>, /* ap 31 */ + <0x00000000 0x00030000 0x001000>, /* ap 33 */ + <0x00001000 0x00031000 0x001000>, /* ap 34 */ + <0x00002000 0x00032000 0x001000>, /* ap 35 */ + <0x00003000 0x00033000 0x001000>, /* ap 36 */ + <0x00004000 0x00034000 0x001000>, /* ap 37 */ + <0x00005000 0x00035000 0x001000>, /* ap 38 */ + <0x00006000 0x00036000 0x001000>, /* ap 39 */ + <0x00007000 0x00037000 0x001000>, /* ap 40 */ + <0x00008000 0x00038000 0x001000>, /* ap 41 */ + <0x00009000 0x00039000 0x001000>, /* ap 42 */ + <0x0000a000 0x0003a000 0x001000>; /* ap 43 */ + + target-module@1000 { /* 0x4ae31000, ap 34 60.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1000 0x1000>; + }; + + target-module@3000 { /* 0x4ae33000, ap 36 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3000 0x1000>; + }; + + target-module@5000 { /* 0x4ae35000, ap 38 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5000 0x1000>; + }; + + target-module@7000 { /* 0x4ae37000, ap 40 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7000 0x1000>; + }; + + target-module@9000 { /* 0x4ae39000, ap 42 70.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9000 0x1000>; + }; + + target-module@c000 { /* 0x4ae3c000, ap 30 04.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xc000 0x4>; + reg-names = "rev"; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x2000>; + + dcan1: can@0 { + compatible = "ti,dra7-d_can"; + reg = <0x0 0x2000>; + syscon-raminit = <&scm_conf 0x558 0>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 24>; + status = "disabled"; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 7ce24b282d42..2bc9add8b7a5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -156,153 +156,15 @@ interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_cfg: l4@4a000000 { - compatible = "ti,dra7-l4-cfg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a000000 0x22c000>; - - scm: scm@2000 { - compatible = "ti,dra7-scm-core", "simple-bus"; - reg = <0x2000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2000 0x2000>; - - scm_conf: scm_conf@0 { - compatible = "syscon", "simple-bus"; - reg = <0x0 0x1400>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x1400>; - - pbias_regulator: pbias_regulator@e00 { - compatible = "ti,pbias-dra7", "ti,pbias-omap"; - reg = <0xe00 0x4>; - syscon = <&scm_conf>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - - scm_conf_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - dra7_pmx_core: pinmux@1400 { - compatible = "ti,dra7-padconf", - "pinctrl-single"; - reg = <0x1400 0x0468>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x3fffffff>; - }; - - scm_conf1: scm_conf@1c04 { - compatible = "syscon"; - reg = <0x1c04 0x0020>; - #syscon-cells = <2>; - }; - - scm_conf_pcie: scm_conf@1c24 { - compatible = "syscon"; - reg = <0x1c24 0x0024>; - }; - - sdma_xbar: dma-router@b78 { - compatible = "ti,dra7-dma-crossbar"; - reg = <0xb78 0xfc>; - #dma-cells = <1>; - dma-requests = <205>; - ti,dma-safe-map = <0>; - dma-masters = <&sdma>; - }; - - edma_xbar: dma-router@c78 { - compatible = "ti,dra7-dma-crossbar"; - reg = <0xc78 0x7c>; - #dma-cells = <2>; - dma-requests = <204>; - ti,dma-safe-map = <0>; - dma-masters = <&edma>; - }; - }; - - cm_core_aon: cm_core_aon@5000 { - compatible = "ti,dra7-cm-core-aon", - "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x5000 0x2000>; - ranges = <0 0x5000 0x2000>; - - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_aon_clockdomains: clockdomains { - }; - }; - - cm_core: cm_core@8000 { - compatible = "ti,dra7-cm-core", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x8000 0x3000>; - ranges = <0 0x8000 0x3000>; - - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_clockdomains: clockdomains { - }; - }; + l4_cfg: interconnect@4a000000 { }; - - l4_wkup: l4@4ae00000 { - compatible = "ti,dra7-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4ae00000 0x3f000>; - - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x40>; - ti,hwmods = "counter_32k"; - }; - - prm: prm@6000 { - compatible = "ti,dra7-prm", "simple-bus"; - reg = <0x6000 0x3000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x6000 0x3000>; - - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prm_clockdomains: clockdomains { - }; - }; - - scm_wkup: scm_conf@c000 { - compatible = "syscon"; - reg = <0xc000 0x1000>; - }; + l4_wkup: interconnect@4ae00000 { + }; + l4_per1: interconnect@48000000 { + }; + l4_per2: interconnect@48400000 { + }; + l4_per3: interconnect@48800000 { }; axi@0 { @@ -469,19 +331,6 @@ #pinctrl-cells = <2>; }; - sdma: dma-controller@4a056000 { - compatible = "ti,omap4430-sdma"; - reg = <0x4a056000 0x1000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - ti,hwmods = "dma_system"; - }; - edma: edma@43300000 { compatible = "ti,edma3-tpcc"; ti,hwmods = "tpcc"; @@ -521,508 +370,6 @@ interrupt-names = "edma3_tcerrint"; }; - gpio1: gpio@4ae10000 { - compatible = "ti,omap4-gpio"; - reg = <0x4ae10000 0x200>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio1"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@48055000 { - compatible = "ti,omap4-gpio"; - reg = <0x48055000 0x200>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@48057000 { - compatible = "ti,omap4-gpio"; - reg = <0x48057000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@48059000 { - compatible = "ti,omap4-gpio"; - reg = <0x48059000 0x200>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@4805b000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805b000 0x200>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio5"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@4805d000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805d000 0x200>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio6"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@48051000 { - compatible = "ti,omap4-gpio"; - reg = <0x48051000 0x200>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio7"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio8: gpio@48053000 { - compatible = "ti,omap4-gpio"; - reg = <0x48053000 0x200>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio8"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - uart1: serial@4806a000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x4806a000 0x100>; - interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; - dma-names = "tx", "rx"; - }; - - uart2: serial@4806c000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; - dma-names = "tx", "rx"; - }; - - uart3: serial@48020000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; - dma-names = "tx", "rx"; - }; - - uart4: serial@4806e000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; - dma-names = "tx", "rx"; - }; - - uart5: serial@48066000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart5"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; - dma-names = "tx", "rx"; - }; - - uart6: serial@48068000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart6"; - clock-frequency = <48000000>; - status = "disabled"; - dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; - dma-names = "tx", "rx"; - }; - - uart7: serial@48420000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48420000 0x100>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart7"; - clock-frequency = <48000000>; - status = "disabled"; - }; - - uart8: serial@48422000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48422000 0x100>; - interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart8"; - clock-frequency = <48000000>; - status = "disabled"; - }; - - uart9: serial@48424000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x48424000 0x100>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart9"; - clock-frequency = <48000000>; - status = "disabled"; - }; - - uart10: serial@4ae2b000 { - compatible = "ti,dra742-uart", "ti,omap4-uart"; - reg = <0x4ae2b000 0x100>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart10"; - clock-frequency = <48000000>; - status = "disabled"; - }; - - mailbox1: mailbox@4a0f4000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4a0f4000 0x200>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox1"; - #mbox-cells = <1>; - ti,mbox-num-users = <3>; - ti,mbox-num-fifos = <8>; - status = "disabled"; - }; - - mailbox2: mailbox@4883a000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4883a000 0x200>; - interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox2"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox3: mailbox@4883c000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4883c000 0x200>; - interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox3"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox4: mailbox@4883e000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4883e000 0x200>; - interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox4"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox5: mailbox@48840000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48840000 0x200>; - interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox5"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox6: mailbox@48842000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48842000 0x200>; - interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox6"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox7: mailbox@48844000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48844000 0x200>; - interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox7"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox8: mailbox@48846000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48846000 0x200>; - interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox8"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox9: mailbox@4885e000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4885e000 0x200>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox9"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox10: mailbox@48860000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48860000 0x200>; - interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox10"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox11: mailbox@48862000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48862000 0x200>; - interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox11"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox12: mailbox@48864000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48864000 0x200>; - interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox12"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - mailbox13: mailbox@48802000 { - compatible = "ti,omap4-mailbox"; - reg = <0x48802000 0x200>; - interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox13"; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <12>; - status = "disabled"; - }; - - timer1: timer@4ae18000 { - compatible = "ti,omap5430-timer"; - reg = <0x4ae18000 0x80>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clock-names = "fck"; - clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>; - }; - - timer2: timer@48032000 { - compatible = "ti,omap5430-timer"; - reg = <0x48032000 0x80>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48034000 { - compatible = "ti,omap5430-timer"; - reg = <0x48034000 0x80>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48036000 { - compatible = "ti,omap5430-timer"; - reg = <0x48036000 0x80>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer4"; - }; - - timer5: timer@48820000 { - compatible = "ti,omap5430-timer"; - reg = <0x48820000 0x80>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer5"; - }; - - timer6: timer@48822000 { - compatible = "ti,omap5430-timer"; - reg = <0x48822000 0x80>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer6"; - }; - - timer7: timer@48824000 { - compatible = "ti,omap5430-timer"; - reg = <0x48824000 0x80>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer7"; - }; - - timer8: timer@48826000 { - compatible = "ti,omap5430-timer"; - reg = <0x48826000 0x80>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer8"; - }; - - timer9: timer@4803e000 { - compatible = "ti,omap5430-timer"; - reg = <0x4803e000 0x80>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - }; - - timer10: timer@48086000 { - compatible = "ti,omap5430-timer"; - reg = <0x48086000 0x80>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - }; - - timer11: timer@48088000 { - compatible = "ti,omap5430-timer"; - reg = <0x48088000 0x80>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - }; - - timer12: timer@4ae20000 { - compatible = "ti,omap5430-timer"; - reg = <0x4ae20000 0x80>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer12"; - ti,timer-alwon; - ti,timer-secure; - }; - - timer13: timer@48828000 { - compatible = "ti,omap5430-timer"; - reg = <0x48828000 0x80>; - interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer13"; - }; - - timer14: timer@4882a000 { - compatible = "ti,omap5430-timer"; - reg = <0x4882a000 0x80>; - interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer14"; - }; - - timer15: timer@4882c000 { - compatible = "ti,omap5430-timer"; - reg = <0x4882c000 0x80>; - interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer15"; - }; - - timer16: timer@4882e000 { - compatible = "ti,omap5430-timer"; - reg = <0x4882e000 0x80>; - interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer16"; - }; - - wdt2: wdt@4ae14000 { - compatible = "ti,omap3-wdt"; - reg = <0x4ae14000 0x80>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - - hwspinlock: spinlock@4a0f6000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x4a0f6000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; @@ -1030,112 +377,6 @@ ti,hwmods = "dmm"; }; - i2c1: i2c@48070000 { - compatible = "ti,omap4-i2c"; - reg = <0x48070000 0x100>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - status = "disabled"; - }; - - i2c2: i2c@48072000 { - compatible = "ti,omap4-i2c"; - reg = <0x48072000 0x100>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - status = "disabled"; - }; - - i2c3: i2c@48060000 { - compatible = "ti,omap4-i2c"; - reg = <0x48060000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - status = "disabled"; - }; - - i2c4: i2c@4807a000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807a000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c4"; - status = "disabled"; - }; - - i2c5: i2c@4807c000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807c000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c5"; - status = "disabled"; - }; - - mmc1: mmc@4809c000 { - compatible = "ti,dra7-sdhci"; - reg = <0x4809c000 0x400>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc1"; - status = "disabled"; - pbias-supply = <&pbias_mmc_reg>; - max-frequency = <192000000>; - mmc-ddr-1_8v; - mmc-ddr-3_3v; - }; - - hdqw1w: 1w@480b2000 { - compatible = "ti,omap3-1w"; - reg = <0x480b2000 0x1000>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "hdq1w"; - }; - - mmc2: mmc@480b4000 { - compatible = "ti,dra7-sdhci"; - reg = <0x480b4000 0x400>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc2"; - status = "disabled"; - max-frequency = <192000000>; - /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */ - sdhci-caps-mask = <0x7 0x0>; - mmc-hs200-1_8v; - mmc-ddr-1_8v; - mmc-ddr-3_3v; - }; - - mmc3: mmc@480ad000 { - compatible = "ti,dra7-sdhci"; - reg = <0x480ad000 0x400>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc3"; - status = "disabled"; - /* Errata i887 limits max-frequency of MMC3 to 64 MHz */ - max-frequency = <64000000>; - /* SDMA is not supported */ - sdhci-caps-mask = <0x0 0x400000>; - }; - - mmc4: mmc@480d1000 { - compatible = "ti,dra7-sdhci"; - reg = <0x480d1000 0x400>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc4"; - status = "disabled"; - max-frequency = <192000000>; - /* SDMA is not supported */ - sdhci-caps-mask = <0x0 0x400000>; - }; - mmu0_dsp1: mmu@40d01000 { compatible = "ti,dra7-dsp-iommu"; reg = <0x40d01000 0x100>; @@ -1308,69 +549,6 @@ >; }; - mcspi1: spi@48098000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48098000 0x200>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; - dmas = <&sdma_xbar 35>, - <&sdma_xbar 36>, - <&sdma_xbar 37>, - <&sdma_xbar 38>, - <&sdma_xbar 39>, - <&sdma_xbar 40>, - <&sdma_xbar 41>, - <&sdma_xbar 42>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - status = "disabled"; - }; - - mcspi2: spi@4809a000 { - compatible = "ti,omap4-mcspi"; - reg = <0x4809a000 0x200>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi2"; - ti,spi-num-cs = <2>; - dmas = <&sdma_xbar 43>, - <&sdma_xbar 44>, - <&sdma_xbar 45>, - <&sdma_xbar 46>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - status = "disabled"; - }; - - mcspi3: spi@480b8000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480b8000 0x200>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi3"; - ti,spi-num-cs = <2>; - dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; - dma-names = "tx0", "rx0"; - status = "disabled"; - }; - - mcspi4: spi@480ba000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480ba000 0x200>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi4"; - ti,spi-num-cs = <1>; - dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; - dma-names = "tx0", "rx0"; - status = "disabled"; - }; - qspi: spi@4b300000 { compatible = "ti,dra7xxx-qspi"; reg = <0x4b300000 0x100>, @@ -1380,7 +558,7 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "qspi"; - clocks = <&l4per_clkctrl DRA7_QSPI_CLKCTRL 25>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; clock-names = "fck"; num-cs = <4>; interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; @@ -1388,266 +566,19 @@ }; /* OCP2SCP3 */ - ocp2scp@4a090000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = <0x4a090000 0x20>; - ti,hwmods = "ocp2scp3"; - sata_phy: phy@4a096000 { - compatible = "ti,phy-pipe3-sata"; - reg = <0x4A096000 0x80>, /* phy_rx */ - <0x4A096400 0x64>, /* phy_tx */ - <0x4A096800 0x40>; /* pll_ctrl */ - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x374>; - clocks = <&sys_clkin1>, - <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>; - clock-names = "sysclk", "refclk"; - syscon-pllreset = <&scm_conf 0x3fc>; - #phy-cells = <0>; - }; - - pcie1_phy: pciephy@4a094000 { - compatible = "ti,phy-pipe3-pcie"; - reg = <0x4a094000 0x80>, /* phy_rx */ - <0x4a094400 0x64>; /* phy_tx */ - reg-names = "phy_rx", "phy_tx"; - syscon-phy-power = <&scm_conf_pcie 0x1c>; - syscon-pcs = <&scm_conf_pcie 0x10>; - clocks = <&dpll_pcie_ref_ck>, - <&dpll_pcie_ref_m2ldo_ck>, - <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 8>, - <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 9>, - <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 10>, - <&optfclk_pciephy_div>, - <&sys_clkin1>; - clock-names = "dpll_ref", "dpll_ref_m2", - "wkupclk", "refclk", - "div-clk", "phy-div", "sysclk"; - #phy-cells = <0>; - }; - - pcie2_phy: pciephy@4a095000 { - compatible = "ti,phy-pipe3-pcie"; - reg = <0x4a095000 0x80>, /* phy_rx */ - <0x4a095400 0x64>; /* phy_tx */ - reg-names = "phy_rx", "phy_tx"; - syscon-phy-power = <&scm_conf_pcie 0x20>; - syscon-pcs = <&scm_conf_pcie 0x10>; - clocks = <&dpll_pcie_ref_ck>, - <&dpll_pcie_ref_m2ldo_ck>, - <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 8>, - <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 9>, - <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 10>, - <&optfclk_pciephy_div>, - <&sys_clkin1>; - clock-names = "dpll_ref", "dpll_ref_m2", - "wkupclk", "refclk", - "div-clk", "phy-div", "sysclk"; - #phy-cells = <0>; - status = "disabled"; - }; - }; - sata: sata@4a141100 { compatible = "snps,dwc-ahci"; reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; phys = <&sata_phy>; phy-names = "sata-phy"; - clocks = <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; ti,hwmods = "sata"; ports-implemented = <0x1>; }; - rtc: rtc@48838000 { - compatible = "ti,am3352-rtc"; - reg = <0x48838000 0x100>; - interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "rtcss"; - clocks = <&sys_32k_ck>; - }; - /* OCP2SCP1 */ - ocp2scp@4a080000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = <0x4a080000 0x20>; - ti,hwmods = "ocp2scp1"; - - usb2_phy1: phy@4a084000 { - compatible = "ti,dra7x-usb2", "ti,omap-usb2"; - reg = <0x4a084000 0x400>; - syscon-phy-power = <&scm_conf 0x300>; - clocks = <&usb_phy1_always_on_clk32k>, - <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; - #phy-cells = <0>; - }; - - usb2_phy2: phy@4a085000 { - compatible = "ti,dra7x-usb2-phy2", - "ti,omap-usb2"; - reg = <0x4a085000 0x400>; - syscon-phy-power = <&scm_conf 0xe74>; - clocks = <&usb_phy2_always_on_clk32k>, - <&l3init_clkctrl DRA7_USB_OTG_SS2_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; - #phy-cells = <0>; - }; - - usb3_phy1: phy@4a084400 { - compatible = "ti,omap-usb3"; - reg = <0x4a084400 0x80>, - <0x4a084800 0x64>, - <0x4a084c00 0x40>; - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x370>; - clocks = <&usb_phy3_always_on_clk32k>, - <&sys_clkin1>, - <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "sysclk", - "refclk"; - #phy-cells = <0>; - }; - }; - - target-module@4a0dd000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_core"; - reg = <0x4a0dd038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_CORE_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0dd000 0x001000>; - - /* SmartReflex child device marked reserved in TRM */ - }; - - target-module@4a0d9000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_mpu"; - reg = <0x4a0d9038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_MPU_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0d9000 0x001000>; - - /* SmartReflex child device marked reserved in TRM */ - }; - - omap_dwc3_1: omap_dwc3_1@48880000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss1"; - reg = <0x48880000 0x10000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - usb1: usb@48890000 { - compatible = "snps,dwc3"; - reg = <0x48890000 0x17000>; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy1>, <&usb3_phy1>; - phy-names = "usb2-phy", "usb3-phy"; - maximum-speed = "super-speed"; - dr_mode = "otg"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - }; - }; - - omap_dwc3_2: omap_dwc3_2@488c0000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss2"; - reg = <0x488c0000 0x10000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - usb2: usb@488d0000 { - compatible = "snps,dwc3"; - reg = <0x488d0000 0x17000>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy2>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - snps,dis_metastability_quirk; - }; - }; - /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ - omap_dwc3_3: omap_dwc3_3@48900000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss3"; - reg = <0x48900000 0x10000>; - interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - status = "disabled"; - usb3: usb@48910000 { - compatible = "snps,dwc3"; - reg = <0x48910000 0x17000>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - snps,dis_u3_susphy_quirk; - snps,dis_u2_susphy_quirk; - }; - }; - - elm: elm@48078000 { - compatible = "ti,am3352-elm"; - reg = <0x48078000 0xfc0>; /* device IO registers */ - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "elm"; - status = "disabled"; - }; - gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; @@ -1666,154 +597,6 @@ status = "disabled"; }; - atl: atl@4843c000 { - compatible = "ti,dra7-atl"; - reg = <0x4843c000 0x3ff>; - ti,hwmods = "atl"; - ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, - <&atl_clkin2_ck>, <&atl_clkin3_ck>; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; - clock-names = "fck"; - status = "disabled"; - }; - - mcasp1: mcasp@48460000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp1"; - reg = <0x48460000 0x2000>, - <0x45800000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; - dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 22>, <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 24>, - <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; - status = "disabled"; - }; - - mcasp2: mcasp@48464000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp2"; - reg = <0x48464000 0x2000>, - <0x45c00000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 24>, - <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; - status = "disabled"; - }; - - mcasp3: mcasp@48468000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp3"; - reg = <0x48468000 0x2000>, - <0x46000000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp4: mcasp@4846c000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp4"; - reg = <0x4846c000 0x2000>, - <0x48436000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp5: mcasp@48470000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp5"; - reg = <0x48470000 0x2000>, - <0x4843a000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp6: mcasp@48474000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp6"; - reg = <0x48474000 0x2000>, - <0x4844c000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp7: mcasp@48478000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp7"; - reg = <0x48478000 0x2000>, - <0x48450000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - - mcasp8: mcasp@4847c000 { - compatible = "ti,dra7-mcasp-audio"; - ti,hwmods = "mcasp8"; - reg = <0x4847c000 0x2000>, - <0x48454000 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; - dma-names = "tx", "rx"; - clocks = <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 22>, - <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 24>; - clock-names = "fck", "ahclkx"; - status = "disabled"; - }; - crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; @@ -1828,93 +611,6 @@ ti,irqs-safe-map = <0>; }; - mac: ethernet@48484000 { - compatible = "ti,dra7-cpsw","ti,cpsw"; - ti,hwmods = "gmac"; - clocks = <&gmac_main_clk>, <&l3init_clkctrl DRA7_GMAC_CLKCTRL 25>; - clock-names = "fck", "cpts"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x784CFE14>; - cpts_clock_shift = <29>; - reg = <0x48484000 0x1000 - 0x48485200 0x2E00>; - #address-cells = <1>; - #size-cells = <1>; - - /* - * Do not allow gating of cpsw clock as workaround - * for errata i877. Keeping internal clock disabled - * causes the device switching characteristics - * to degrade over time and eventually fail to meet - * the data manual delay time/skew specs. - */ - ti,no-idle; - - /* - * rx_thresh_pend - * rx_pend - * tx_pend - * misc_pend - */ - interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; - ranges; - syscon = <&scm_conf>; - status = "disabled"; - - davinci_mdio: mdio@48485000 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - reg = <0x48485000 0x100>; - }; - - cpsw_emac0: slave@48480200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - cpsw_emac1: slave@48480300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@4a002554 { - compatible = "ti,dra7xx-cpsw-phy-sel"; - reg= <0x4a002554 0x4>; - reg-names = "gmii-sel"; - }; - }; - - dcan1: can@4ae3c000 { - compatible = "ti,dra7-d_can"; - ti,hwmods = "dcan1"; - reg = <0x4ae3c000 0x2000>; - syscon-raminit = <&scm_conf 0x558 0>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&wkupaon_clkctrl DRA7_DCAN1_CLKCTRL 24>; - status = "disabled"; - }; - - dcan2: can@48480000 { - compatible = "ti,dra7-d_can"; - ti,hwmods = "dcan2"; - reg = <0x48480000 0x2000>; - syscon-raminit = <&scm_conf 0x558 1>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sys_clkin1>; - status = "disabled"; - }; - dss: dss@58000000 { compatible = "ti,dra7-dss"; /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ @@ -1932,7 +628,7 @@ reg = <0x58001000 0x1000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "dss_dispc"; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; /* CTRL_CORE_SMA_SW_1 */ syscon-pol = <&scm_conf 0x534>; @@ -1948,104 +644,14 @@ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; ti,hwmods = "dss_hdmi"; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; dmas = <&sdma_xbar 76>; dma-names = "audio_tx"; }; }; - epwmss0: epwmss@4843e000 { - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; - reg = <0x4843e000 0x30>; - ti,hwmods = "epwmss0"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges; - - ehrpwm0: pwm@4843e200 { - compatible = "ti,dra746-ehrpwm", - "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x4843e200 0x80>; - clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ecap0: ecap@4843e100 { - compatible = "ti,dra746-ecap", - "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x4843e100 0x80>; - clocks = <&l4_root_clk_div>; - clock-names = "fck"; - status = "disabled"; - }; - }; - - epwmss1: epwmss@48440000 { - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; - reg = <0x48440000 0x30>; - ti,hwmods = "epwmss1"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges; - - ehrpwm1: pwm@48440200 { - compatible = "ti,dra746-ehrpwm", - "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48440200 0x80>; - clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ecap1: ecap@48440100 { - compatible = "ti,dra746-ecap", - "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x48440100 0x80>; - clocks = <&l4_root_clk_div>; - clock-names = "fck"; - status = "disabled"; - }; - }; - - epwmss2: epwmss@48442000 { - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; - reg = <0x48442000 0x30>; - ti,hwmods = "epwmss2"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges; - - ehrpwm2: pwm@48442200 { - compatible = "ti,dra746-ehrpwm", - "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x48442200 0x80>; - clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ecap2: ecap@48442100 { - compatible = "ti,dra746-ecap", - "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x48442100 0x80>; - clocks = <&l4_root_clk_div>; - clock-names = "fck"; - status = "disabled"; - }; - }; - aes1: aes@4b500000 { compatible = "ti,omap4-aes"; ti,hwmods = "aes1"; @@ -2090,15 +696,6 @@ clock-names = "fck"; }; - rng: rng@48090000 { - compatible = "ti,omap4-rng"; - ti,hwmods = "rng"; - reg = <0x48090000 0x2000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&l3_iclk_div>; - clock-names = "fck"; - }; - opp_supply_mpu: opp-supply@4a003b20 { compatible = "ti,omap5-opp-supply"; reg = <0x4a003b20 0xc>; @@ -2148,8 +745,6 @@ temperature = <120000>; /* milli Celsius */ }; -#include "dra7xx-clocks.dtsi" - &core_crit { temperature = <120000>; /* milli Celsius */ }; @@ -2165,3 +760,6 @@ &iva_crit { temperature = <120000>; /* milli Celsius */ }; + +#include "dra7-l4.dtsi" +#include "dra7xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index e297b923b71a..be65f3bc59d1 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -530,7 +530,7 @@ &atl { assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_clkctrl DRA7_ATL_CLKCTRL 26>, + <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>, <&dpll_abe_ck>, <&dpll_abe_m2x2_ck>, <&atl_clkin2_ck>; @@ -548,7 +548,7 @@ &mcasp3 { #sound-dai-cells = <0>; - assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; + assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&atl_clkin2_ck>; status = "okay"; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index c011d2e64fef..89831552cd86 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -25,8 +25,8 @@ <0x58004300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1"; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>; clock-names = "fck", "video1_clk"; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 8f9df09155d8..8294a607fec8 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -103,9 +103,9 @@ reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2"; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 13>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>; clock-names = "fck", "video1_clk", "video2_clk"; }; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 613e4dc0ed3e..9ee45aa365d8 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -24,7 +24,7 @@ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET | SYSC_DRA7_MCAN_ENAWAKEUP)>; ti,syss-mask = <1>; - clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>; clock-names = "fck"; m_can0: mcan@1a00 { diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 69562cdbeada..bb52c6f0e90e 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -11,25 +11,25 @@ atl_clkin0_ck: atl_clkin0_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; atl_clkin1_ck: atl_clkin1_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; atl_clkin2_ck: atl_clkin2_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; atl_clkin3_ck: atl_clkin3_ck { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; - clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>; + clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; hdmi_clkin_ck: hdmi_clkin_ck { @@ -1526,44 +1526,82 @@ }; &cm_core_aon { - mpu_cm: mpu_cm@300 { + mpu_cm: mpu-cm@300 { compatible = "ti,omap4-cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x300 0x100>; - mpu_clkctrl: clk@20 { + mpu_clkctrl: mpu-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; + + }; + + dsp1_cm: dsp1-cm@400 { + compatible = "ti,omap4-cm"; + reg = <0x400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x100>; + + dsp1_clkctrl: dsp1-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; - ipu_cm: ipu_cm@500 { + ipu_cm: ipu-cm@500 { compatible = "ti,omap4-cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x500 0x100>; - ipu_clkctrl: clk@40 { + ipu1_clkctrl: ipu1-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + + ipu_clkctrl: ipu-clkctrl@50 { + compatible = "ti,clkctrl"; + reg = <0x50 0x34>; + #clock-cells = <2>; + }; + + }; + + dsp2_cm: dsp2-cm@600 { + compatible = "ti,omap4-cm"; + reg = <0x600 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x600 0x100>; + + dsp2_clkctrl: dsp2-clkctrl@20 { compatible = "ti,clkctrl"; - reg = <0x40 0x44>; + reg = <0x20 0x4>; #clock-cells = <2>; }; + }; - rtc_cm: rtc_cm@700 { + rtc_cm: rtc-cm@700 { compatible = "ti,omap4-cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x100>; - rtc_clkctrl: clk@40 { + rtc_clkctrl: rtc-clkctrl@20 { compatible = "ti,clkctrl"; - reg = <0x40 0x8>; + reg = <0x20 0x28>; #clock-cells = <2>; }; }; @@ -1571,160 +1609,207 @@ }; &cm_core { - coreaon_cm: coreaon_cm@600 { + coreaon_cm: coreaon-cm@600 { compatible = "ti,omap4-cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - coreaon_clkctrl: clk@20 { + coreaon_clkctrl: coreaon-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; }; - l3main1_cm: l3main1_cm@700 { + l3main1_cm: l3main1-cm@700 { compatible = "ti,omap4-cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x100>; - l3main1_clkctrl: clk@20 { + l3main1_clkctrl: l3main1-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x74>; #clock-cells = <2>; }; + + }; + + ipu2_cm: ipu2-cm@900 { + compatible = "ti,omap4-cm"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x900 0x100>; + + ipu2_clkctrl: ipu2-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; + }; - dma_cm: dma_cm@a00 { + dma_cm: dma-cm@a00 { compatible = "ti,omap4-cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - dma_clkctrl: clk@20 { + dma_clkctrl: dma-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - emif_cm: emif_cm@b00 { + emif_cm: emif-cm@b00 { compatible = "ti,omap4-cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xb00 0x100>; - emif_clkctrl: clk@20 { + emif_clkctrl: emif-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - atl_cm: atl_cm@c00 { + atl_cm: atl-cm@c00 { compatible = "ti,omap4-cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xc00 0x100>; - atl_clkctrl: clk@0 { + atl_clkctrl: atl-clkctrl@0 { compatible = "ti,clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - l4cfg_cm: l4cfg_cm@d00 { + l4cfg_cm: l4cfg-cm@d00 { compatible = "ti,omap4-cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xd00 0x100>; - l4cfg_clkctrl: clk@20 { + l4cfg_clkctrl: l4cfg-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x84>; #clock-cells = <2>; }; }; - l3instr_cm: l3instr_cm@e00 { + l3instr_cm: l3instr-cm@e00 { compatible = "ti,omap4-cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xe00 0x100>; - l3instr_clkctrl: clk@20 { + l3instr_clkctrl: l3instr-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - dss_cm: dss_cm@1100 { + dss_cm: dss-cm@1100 { compatible = "ti,omap4-cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1100 0x100>; - dss_clkctrl: clk@20 { + dss_clkctrl: dss-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; }; - l3init_cm: l3init_cm@1300 { + l3init_cm: l3init-cm@1300 { compatible = "ti,omap4-cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1300 0x100>; - l3init_clkctrl: clk@20 { + l3init_clkctrl: l3init-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x6c>, <0xe0 0x14>; + #clock-cells = <2>; + }; + + pcie_clkctrl: pcie-clkctrl@b0 { + compatible = "ti,clkctrl"; + reg = <0xb0 0xc>; + #clock-cells = <2>; + }; + + gmac_clkctrl: gmac-clkctrl@d0 { compatible = "ti,clkctrl"; - reg = <0x20 0xd4>; + reg = <0xd0 0x4>; #clock-cells = <2>; }; + }; - l4per_cm: l4per_cm@1700 { + l4per_cm: l4per-cm@1700 { compatible = "ti,omap4-cm"; reg = <0x1700 0x300>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1700 0x300>; - l4per_clkctrl: clk@0 { + l4per_clkctrl: l4per-clkctrl@28 { compatible = "ti,clkctrl"; - reg = <0x0 0x20c>; + reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>; #clock-cells = <2>; - assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>; + assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; assigned-clock-parents = <&abe_24m_fclk>; }; + + l4sec_clkctrl: l4sec-clkctrl@1a0 { + compatible = "ti,clkctrl"; + reg = <0x1a0 0x2c>; + #clock-cells = <2>; + }; + + l4per2_clkctrl: l4per2-clkctrl@c { + compatible = "ti,clkctrl"; + reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>; + #clock-cells = <2>; + }; + + l4per3_clkctrl: l4per3-clkctrl@14 { + compatible = "ti,clkctrl"; + reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>; + #clock-cells = <2>; + }; }; }; &prm { - wkupaon_cm: wkupaon_cm@1800 { + wkupaon_cm: wkupaon-cm@1800 { compatible = "ti,omap4-cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1800 0x100>; - wkupaon_clkctrl: clk@20 { + wkupaon_clkctrl: wkupaon-clkctrl@20 { compatible = "ti,clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 373ea8720769..67d86012a85c 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the EMEV2 SoC + * Device Tree Source for the Emma Mobile EV2 SoC * * Copyright (C) 2012 Renesas Solutions Corp. */ diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 7c22cbf6f3d4..ace50e194a45 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -36,11 +36,13 @@ cooling-maps { map0 { /* Corresponds to 500MHz */ - cooling-device = <&cpu0 5 5>; + cooling-device = <&cpu0 5 5>, + <&cpu1 5 5>; }; map1 { /* Corresponds to 200MHz */ - cooling-device = <&cpu0 8 8>; + cooling-device = <&cpu0 8 8>, + <&cpu1 8 8>; }; }; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 6ffedf4ed9f2..e25765500e99 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -121,11 +121,13 @@ cooling-maps { map0 { /* Correspond to 500MHz at freq_table */ - cooling-device = <&cpu0 5 5>; + cooling-device = <&cpu0 5 5>, + <&cpu1 5 5>; }; map1 { /* Correspond to 200MHz at freq_table */ - cooling-device = <&cpu0 8 8>; + cooling-device = <&cpu0 8 8>, + <&cpu1 8 8>; }; }; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 2a6b828c01b7..7479993755da 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -116,11 +116,13 @@ cooling-maps { map0 { /* Corresponds to 500MHz */ - cooling-device = <&cpu0 5 5>; + cooling-device = <&cpu0 5 5>, + <&cpu1 5 5>; }; map1 { /* Corresponds to 200MHz */ - cooling-device = <&cpu0 8 8>; + cooling-device = <&cpu0 8 8>, + <&cpu1 8 8>; }; }; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 27a1ee28c3bb..608d17454179 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -357,7 +357,7 @@ }; hsotg: hsotg@12480000 { - compatible = "snps,dwc2"; + compatible = "samsung,s3c6400-hsotg", "snps,dwc2"; reg = <0x12480000 0x20000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_USBOTG>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index f9bbc6315cd9..8dbc47d627a5 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -138,11 +138,11 @@ cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 2 2>; + cooling-device = <&cpu0 2 2>, <&cpu1 2 2>; }; map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 4 4>; + cooling-device = <&cpu0 4 4>, <&cpu1 4 4>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index b6091c27f155..b491c345b2e8 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -51,7 +51,7 @@ #cooling-cells = <2>; /* min followed by max */ }; - cpu@901 { + cpu1: cpu@901 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x901>; @@ -298,6 +298,7 @@ opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1150000>; + opp-suspend; }; }; @@ -367,6 +368,7 @@ }; opp-200000000 { opp-hz = /bits/ 64 <200000000>; + opp-suspend; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index ab7affab7f1c..0038465f38f1 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -45,11 +45,15 @@ cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; }; map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; + cooling-device = <&cpu0 13 13>, + <&cpu1 13 13>, + <&cpu2 13 13>, + <&cpu3 13 13>; }; }; }; @@ -446,6 +450,7 @@ }; s5m8767_osc: clocks { + compatible = "samsung,s5m8767-clk"; #clock-cells = <1>; clock-output-names = "s5m8767_ap", "s5m8767_cp", "s5m8767_bt"; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index aed2f2e2b0d1..4c15cb616cdf 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -267,11 +267,15 @@ cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; }; map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; + cooling-device = <&cpu0 13 13>, + <&cpu1 13 13>, + <&cpu2 13 13>, + <&cpu3 13 13>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 2caa3132f34e..3a9eb1e91c45 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -72,11 +72,15 @@ cooling-maps { cooling_map0: map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, + <&cpu2 7 7>, <&cpu3 7 7>; }; cooling_map1: map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; + cooling-device = <&cpu0 13 13>, + <&cpu1 13 13>, + <&cpu2 13 13>, + <&cpu3 13 13>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 459919b65df8..2bdf899df436 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -45,24 +45,22 @@ cooling-maps { map0 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 9 9>; + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>, + <&cpu2 9 9>, <&cpu3 9 9>, + <&fan0 1 2>; }; map1 { trip = <&cpu_alert2>; - cooling-device = <&cpu0 15 15>; + cooling-device = <&cpu0 15 15>, + <&cpu1 15 15>, + <&cpu2 15 15>, + <&cpu3 15 15>, + <&fan0 2 3>; }; map2 { trip = <&cpu_alert0>; cooling-device = <&fan0 0 1>; }; - map3 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 1 2>; - }; - map4 { - trip = <&cpu_alert2>; - cooling-device = <&fan0 2 3>; - }; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi index 8e7a7fb98124..d83fbd4e434c 100644 --- a/arch/arm/boot/dts/exynos4412-prime.dtsi +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -30,9 +30,11 @@ }; &cooling_map0 { - cooling-device = <&cpu0 9 9>; + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>, + <&cpu2 9 9>, <&cpu3 9 9>; }; &cooling_map1 { - cooling-device = <&cpu0 15 15>; + cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, + <&cpu2 15 15>, <&cpu3 15 15>; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 51f72f0327e5..26ad6ab3c6af 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -45,7 +45,7 @@ #cooling-cells = <2>; /* min followed by max */ }; - cpu@a01 { + cpu1: cpu@a01 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; @@ -55,7 +55,7 @@ #cooling-cells = <2>; /* min followed by max */ }; - cpu@a02 { + cpu2: cpu@a02 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA02>; @@ -65,7 +65,7 @@ #cooling-cells = <2>; /* min followed by max */ }; - cpu@a03 { + cpu3: cpu@a03 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA03>; @@ -432,6 +432,7 @@ opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1050000>; + opp-suspend; }; }; @@ -520,6 +521,7 @@ opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; + opp-suspend; }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 7d1f2dc59038..2ca9319f48f2 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/clock/samsung,s2mps11.h> #include "exynos5250.dtsi" / { @@ -180,31 +181,6 @@ }; }; -&dp { - status = "okay"; - samsung,color-space = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - - display-timings { - native-mode = <&timing0>; - - timing0: timing { - /* 2560x1600 DP panel */ - clock-frequency = <50000>; - hactive = <2560>; - vactive = <1600>; - hfront-porch = <48>; - hback-porch = <80>; - hsync-len = <32>; - vback-porch = <16>; - vfront-porch = <8>; - vsync-len = <6>; - }; - }; -}; - &fimd { status = "okay"; }; @@ -264,6 +240,12 @@ <&gpx2 4 GPIO_ACTIVE_HIGH>, <&gpx2 5 GPIO_ACTIVE_HIGH>; + s5m8767_osc: clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "s5m8767_ap", "unused1", "unused2"; + }; + regulators { ldo1_reg: LDO1 { regulator-name = "VDD_ALIVE_1.0V"; @@ -601,6 +583,8 @@ }; &rtc { + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 5044f754e6e5..80986b97dfe5 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -59,7 +59,7 @@ operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; @@ -1087,11 +1087,12 @@ cooling-maps { map0 { /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 9 9>; + cooling-device = <&cpu0 9 9>, <&cpu1 9 9>; }; map1 { /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 15 15>; + cooling-device = <&cpu0 15 15>, + <&cpu1 15 15>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index cdda614e417e..3447160e1fbf 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -89,6 +89,7 @@ pinctrl-0 = <&s2mps11_irq>; s2mps11_osc: clocks { + compatible = "samsung,s2mps11-clk"; #clock-cells = <1>; clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index dda8ca2d2324..b82af7c89654 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -289,6 +289,13 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; }; + + sd2_wp: sd2-wp { + samsung,pins = "gpc4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; }; &pinctrl_2 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 831c7336f237..3cf905047893 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -141,6 +141,7 @@ reg = <0x66>; s2mps11_osc: clocks { + compatible = "samsung,s2mps11-clk"; #clock-cells = <1>; clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 2fac4baf1eb4..bf09eab90f8a 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Hardkernel Odroid XU3/XU4/HC1 boards core device tree source + * Hardkernel Odroid XU3/XU3-Lite/XU4/HC1 boards core device tree source * * Copyright (c) 2017 Marek Szyprowski * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd. @@ -141,6 +141,7 @@ pinctrl-0 = <&s2mps11_irq>; s2mps11_osc: clocks { + compatible = "samsung,s2mps11-clk"; #clock-cells = <1>; clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt"; @@ -231,7 +232,7 @@ ldo13_reg: LDO13 { regulator-name = "vddq_mmc2"; - regulator-min-microvolt = <2800000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; }; @@ -498,11 +499,15 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>; bus-width = <4>; cap-sd-highspeed; + max-frequency = <200000000>; vmmc-supply = <&ldo19_reg>; vqmmc-supply = <&ldo13_reg>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; }; &nocp_mem0_0 { diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index 8f332be143f7..d271e7548826 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -56,24 +56,30 @@ */ map0 { trip = <&cpu0_alert0>; - cooling-device = <&cpu0 0 2>; - }; - map1 { - trip = <&cpu0_alert0>; - cooling-device = <&cpu4 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; /* * When reaching cpu0_alert1, reduce CPU * further, down to 600 MHz (12 steps for big, * 7 steps for LITTLE). */ - map2 { - trip = <&cpu0_alert1>; - cooling-device = <&cpu0 3 7>; - }; - map3 { + map1 { trip = <&cpu0_alert1>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -99,19 +105,25 @@ cooling-maps { map0 { trip = <&cpu1_alert0>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map1 { - trip = <&cpu1_alert0>; - cooling-device = <&cpu4 0 2>; - }; - map2 { - trip = <&cpu1_alert1>; - cooling-device = <&cpu0 3 7>; - }; - map3 { trip = <&cpu1_alert1>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -137,19 +149,25 @@ cooling-maps { map0 { trip = <&cpu2_alert0>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map1 { - trip = <&cpu2_alert0>; - cooling-device = <&cpu4 0 2>; - }; - map2 { - trip = <&cpu2_alert1>; - cooling-device = <&cpu0 3 7>; - }; - map3 { trip = <&cpu2_alert1>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -175,19 +193,25 @@ cooling-maps { map0 { trip = <&cpu3_alert0>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map1 { - trip = <&cpu3_alert0>; - cooling-device = <&cpu4 0 2>; - }; - map2 { - trip = <&cpu3_alert1>; - cooling-device = <&cpu0 3 7>; - }; - map3 { trip = <&cpu3_alert1>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index 03611d50c5a9..e84544b220b9 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -26,8 +26,7 @@ "Speakers", "SPKL", "Speakers", "SPKR"; - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>, - <&clock CLK_MOUT_EPLL>, + assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MOUT_USER_MAU_EPLL>, <&clock_audss EXYNOS_MOUT_AUDSS>, @@ -36,8 +35,7 @@ <&clock_audss EXYNOS_DOUT_AUD_BUS>, <&clock_audss EXYNOS_DOUT_I2S>; - assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>, - <&clock CLK_FOUT_EPLL>, + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MAU_EPLL>, @@ -48,7 +46,6 @@ <0>, <0>, <0>, - <0>, <196608001>, <(196608002 / 2)>, <196608000>; @@ -84,4 +81,6 @@ &i2s0 { status = "okay"; + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index e522edb2bb82..b299e541cac0 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Hardkernel Odroid XU3 board device tree source + * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -113,24 +113,30 @@ */ map3 { trip = <&cpu0_alert3>; - cooling-device = <&cpu0 0 2>; - }; - map4 { - trip = <&cpu0_alert3>; - cooling-device = <&cpu4 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; /* * When reaching cpu0_alert4, reduce CPU * further, down to 600 MHz (12 steps for big, * 7 steps for LITTLE). */ - map5 { - trip = <&cpu0_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { + map4 { trip = <&cpu0_alert4>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -185,19 +191,25 @@ }; map3 { trip = <&cpu1_alert3>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map4 { - trip = <&cpu1_alert3>; - cooling-device = <&cpu4 0 2>; - }; - map5 { - trip = <&cpu1_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { trip = <&cpu1_alert4>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -252,19 +264,25 @@ }; map3 { trip = <&cpu2_alert3>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map4 { - trip = <&cpu2_alert3>; - cooling-device = <&cpu4 0 2>; - }; - map5 { - trip = <&cpu2_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { trip = <&cpu2_alert4>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -319,19 +337,25 @@ }; map3 { trip = <&cpu3_alert3>; - cooling-device = <&cpu0 0 2>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; }; map4 { - trip = <&cpu3_alert3>; - cooling-device = <&cpu4 0 2>; - }; - map5 { - trip = <&cpu3_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { trip = <&cpu3_alert4>; - cooling-device = <&cpu4 3 12>; + cooling-device = <&cpu0 3 7>, + <&cpu1 3 7>, + <&cpu2 3 7>, + <&cpu3 3 7>, + <&cpu4 3 12>, + <&cpu5 3 12>, + <&cpu6 3 12>, + <&cpu7 3 12>; }; }; }; @@ -392,6 +416,7 @@ cap-mmc-highspeed; mmc-hs200-1_8v; mmc-hs400-1_8v; + max-frequency = <200000000>; vmmc-supply = <&ldo18_reg>; vqmmc-supply = <&ldo3_reg>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts index 4a30cc849b00..122174ea9e0a 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -33,8 +33,7 @@ compatible = "samsung,odroid-xu3-audio"; model = "Odroid-XU4"; - assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>, - <&clock CLK_MOUT_EPLL>, + assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MOUT_USER_MAU_EPLL>, <&clock_audss EXYNOS_MOUT_AUDSS>, @@ -43,8 +42,7 @@ <&clock_audss EXYNOS_DOUT_AUD_BUS>, <&clock_audss EXYNOS_DOUT_I2S>; - assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>, - <&clock CLK_FOUT_EPLL>, + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MAU_EPLL>, @@ -55,7 +53,6 @@ <0>, <0>, <0>, - <0>, <196608001>, <(196608002 / 2)>, <196608000>; @@ -79,6 +76,8 @@ &i2s0 { status = "okay"; + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; }; &pwm { diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi new file mode 100644 index 000000000000..87bb8b576250 --- /dev/null +++ b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + label = "u-boot"; + }; + + u-boot-env@60000 { + reg = <0x60000 0x20000>; + label = "env"; + }; + + fit@80000 { + reg = <0x80000 0x1b80000>; + label = "fit"; + }; + + /* + * "data0" partition is used by several Facebook BMC platforms + * as persistent data store. + */ + data0@1c00000 { + reg = <0x1c00000 0x400000>; + label = "data0"; + }; + + /* + * Although the master partition can be created by enabling + * MTD_PARTITIONED_MASTER option, below "flash0" partition is + * explicitly created to avoid breaking legacy applications. + */ + flash0@0 { + reg = <0x0 0x2000000>; + label = "flash0"; + }; +}; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index 6f258b50eb44..cc0c3cf89eaa 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-esc { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_ESC>; label = "reset"; @@ -36,7 +36,7 @@ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; button-eject { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_EJECTCD>; label = "unmount"; @@ -64,7 +64,6 @@ gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>; - /* Collides with pflash CE1, not so cool */ cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; @@ -253,15 +252,18 @@ soc { flash@30000000 { /* - * Flash access is by default disabled, because it - * collides with the Chip Enable signal for the display - * panel, that reuse the parallel flash Chip Select 1 - * (CS1). Enabling flash makes graphics stop working. - * - * We might be able to hack around this by letting - * GPIO poke around in the flash controller registers. + * Flash access collides with the Chip Enable signal for + * the display panel, that reuse the parallel flash Chip + * Select 1 (CS1). We switch the pin control state so we + * enable these pins for flash access only when we need + * then, and when disabled they can be used for GPIO which + * is what the display panel needs. */ - /* status = "okay"; */ + status = "okay"; + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; + /* 32MB of flash */ reg = <0x30000000 0x02000000>; @@ -274,20 +276,16 @@ read-only; }; /* - * Between the boot loader and the rootfs is the kernel - * in a custom Storlink format flashed from the boot - * menu. The rootfs is in squashfs format. + * This firmware image contains the kernel catenated + * with the squashfs root filesystem. For some reason + * this is called "upgrade" on the vendor system. */ - partition@1800c0 { - label = "rootfs"; - reg = <0x001800c0 0x01dbff40>; - read-only; - }; - partition@1f40000 { + partition@40000 { label = "upgrade"; - reg = <0x01f40000 0x00040000>; + reg = <0x00040000 0x01f40000>; read-only; }; + /* RGDB, Residental Gateway Database? */ partition@1f80000 { label = "rgdb"; reg = <0x01f80000 0x00040000>; @@ -331,7 +329,6 @@ "gpio0cgrp", "gpio0egrp", "gpio0fgrp", - "gpio0ggrp", "gpio0hgrp"; }; }; @@ -346,6 +343,18 @@ groups = "gpio1bgrp"; }; }; + /* + * These GPIO groups will be mapped in over some + * of the flash pins when the flash is not in + * active use. + */ + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; pinctrl-gmii { mux { function = "gmii"; @@ -434,7 +443,7 @@ }; display-controller@6a000000 { - status = "okay"; + status = "disabled"; port@0 { reg = <0>; @@ -443,5 +452,13 @@ }; }; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index d1329322b968..b12504e10f0b 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -34,7 +34,7 @@ compatible = "gpio-keys"; button-esc { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_ESC>; label = "reset"; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 963ea890c87f..f4535d635f3b 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "Backup button"; @@ -36,7 +36,7 @@ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; }; button-restart { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_RESTART>; label = "Softreset button"; @@ -204,5 +204,13 @@ ata@63400000 { status = "okay"; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts index eb4f0bf074da..9611ddf06792 100644 --- a/arch/arm/boot/dts/gemini-rut1xx.dts +++ b/arch/arm/boot/dts/gemini-rut1xx.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "Reset to defaults"; @@ -124,5 +124,25 @@ /* Not used in this platform */ }; }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index ebefb7297379..2bb953440793 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -324,5 +324,13 @@ ata@63400000 { status = "okay"; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 3787cf3763c4..239dfacaae4d 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "console=ttyS0,115200n8"; + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; }; @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "factory reset"; @@ -41,14 +41,12 @@ compatible = "gpio-leds"; led-green-info { label = "sq201:green:info"; - /* Conflict with parallel flash */ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; led-green-usb { label = "sq201:green:usb"; - /* Conflict with parallel and NAND flash */ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "usb-host"; @@ -126,49 +124,17 @@ soc { flash@30000000 { - /* - * Flash access can be enabled, with the side effect - * of disabling access to GPIO LED on GPIO0[20] which - * reuse one of the parallel flash chip select lines. - * Also the default firmware on the machine has the - * problem that since it uses the flash, the two LEDS - * on the right become numb. - */ - /* status = "okay"; */ + status = "okay"; + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; /* 16MB of flash */ reg = <0x30000000 0x01000000>; - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00120000>; - read-only; - }; - partition@120000 { - label = "Kernel"; - reg = <0x00120000 0x00200000>; - }; - partition@320000 { - label = "Ramdisk"; - reg = <0x00320000 0x00600000>; - }; - partition@920000 { - label = "Application"; - reg = <0x00920000 0x00600000>; - }; - partition@f20000 { - label = "VCTL"; - reg = <0x00f20000 0x00020000>; - read-only; - }; - partition@f40000 { - label = "CurConf"; - reg = <0x00f40000 0x000a0000>; - read-only; - }; - partition@fe0000 { - label = "FIS directory"; - reg = <0x00fe0000 0x00020000>; - read-only; + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x1fc>; }; }; @@ -184,9 +150,7 @@ mux { function = "gpio0"; groups = "gpio0fgrp", - "gpio0ggrp", - "gpio0hgrp", - "gpio0kgrp"; + "gpio0hgrp"; }; }; /* @@ -199,6 +163,18 @@ groups = "gpio1dgrp"; }; }; + /* + * These GPIO groups will be mapped in over some + * of the flash pins when the flash is not in + * active use. + */ + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; pinctrl-gmii { mux { function = "gmii"; @@ -316,5 +292,13 @@ ata@63000000 { status = "okay"; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts index 29af86cd10f7..3a2761dd460f 100644 --- a/arch/arm/boot/dts/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -29,7 +29,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "reset"; @@ -171,5 +171,13 @@ /* Not used in this platform */ }; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts index 24e6ae3616f7..52b4dbc0c072 100644 --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -28,7 +28,7 @@ compatible = "gpio-keys"; button-setup { - debounce-interval = <50>; + debounce-interval = <100>; wakeup-source; linux,code = <KEY_SETUP>; label = "reset"; @@ -183,5 +183,13 @@ phy-handle = <&phy1>; }; }; + + usb@68000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index eb752e9495de..8cf67b11751f 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -409,5 +409,37 @@ #size-cells = <0>; status = "disabled"; }; + + usb@68000000 { + compatible = "cortina,gemini-usb", "faraday,fotg210"; + reg = <0x68000000 0x1000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_USB0>; + clocks = <&syscon GEMINI_CLK_GATE_USB0>; + clock-names = "PCLK"; + /* + * This will claim pins for USB0 and USB1 at the same + * time as they are using some common pins. If you for + * some reason have a system using USB1 at 96000000 but + * NOT using USB0 at 68000000 you wll have to add the + * usb_default_pins to the USB controller at 96000000 + * in your .dts for the board. + */ + pinctrl-names = "default"; + pinctrl-0 = <&usb_default_pins>; + syscon = <&syscon>; + status = "disabled"; + }; + + usb@69000000 { + compatible = "cortina,gemini-usb", "faraday,fotg210"; + reg = <0x69000000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_USB1>; + clocks = <&syscon GEMINI_CLK_GATE_USB1>; + clock-names = "PCLK"; + syscon = <&syscon>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index a1d81badb5c8..119b19ba53b6 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -21,6 +21,7 @@ }; memory@8000000 { + device_type = "memory"; reg = <0x08000000 0x04000000>; }; }; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts index 11515c0cb195..ee4b1b106b1a 100644 --- a/arch/arm/boot/dts/imx1-apf9328.dts +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -21,6 +21,7 @@ }; memory@8000000 { + device_type = "memory"; reg = <0x08000000 0x00800000>; }; }; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index b00ece16b853..b30448cde582 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -15,10 +15,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { gpio0 = &gpio1; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 98efe1aeb26a..0b2701ca2921 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -10,6 +10,7 @@ compatible = "fsl,imx23-evk", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 31b1e3581ac0..e2bac4d8f507 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -20,6 +20,7 @@ compatible = "olimex,imx23-olinuxino", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts index faf701b2adb2..46057d9bf555 100644 --- a/arch/arm/boot/dts/imx23-sansa.dts +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -50,6 +50,7 @@ compatible = "sandisk,sansa_fuze_plus", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts index 2ff6cdf71a55..df2a9e6486a4 100644 --- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -17,6 +17,7 @@ compatible = "fsl,stmp378x-devb", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts index db53089fb7fb..a6213c590f94 100644 --- a/arch/arm/boot/dts/imx23-xfi3.dts +++ b/arch/arm/boot/dts/imx23-xfi3.dts @@ -49,6 +49,7 @@ compatible = "creative,x-fi3", "fsl,imx23"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index ea259927eef6..8257630f7a49 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -13,10 +13,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { gpio0 = &gpio0; diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi index e316fe08837a..e4d7da267532 100644 --- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi +++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi @@ -18,6 +18,7 @@ compatible = "eukrea,cpuimx25", "fsl,imx25"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x4000000>; /* 64M */ }; }; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index 5cb6967866c0..f37e9a75a3ca 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -37,6 +37,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x02000000 0x90000000 0x02000000>; }; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index a5626b46ac4e..f8544a9e4633 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -12,6 +12,7 @@ compatible = "fsl,imx25-pdk", "fsl,imx25"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index b25309d26ea5..9a097ef014af 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -12,10 +12,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -388,12 +386,16 @@ epit1: timer@53f94000 { compatible = "fsl,imx25-epit"; reg = <0x53f94000 0x4000>; + clocks = <&clks 83>, <&clks 43>; + clock-names = "ipg", "per"; interrupts = <28>; }; epit2: timer@53f98000 { compatible = "fsl,imx25-epit"; reg = <0x53f98000 0x4000>; + clocks = <&clks 84>, <&clks 43>; + clock-names = "ipg", "per"; interrupts = <27>; }; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index 3eddd805a793..f635d5c5029c 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -20,6 +20,7 @@ compatible = "armadeus,imx27-apf27", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x04000000>; }; }; diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi index 9c455dcbe6eb..c85f9d01768a 100644 --- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -17,6 +17,7 @@ compatible = "eukrea,cpuimx27", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index f9a882d99132..35123b7cb6b3 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -10,6 +10,7 @@ compatible = "fsl,imx27-pdk", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index cbad7c88c58c..b0b4f7c00246 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -18,6 +18,7 @@ compatible = "phytec,imx27-pca100", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x08000000>; /* 128MB */ }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index ec466b4bfd41..0935e1400e5d 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -17,6 +17,7 @@ compatible = "phytec,imx27-pcm038", "fsl,imx27"; memory@a0000000 { + device_type = "memory"; reg = <0xa0000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 151b0eb17dda..26ff5d419bfc 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -16,10 +16,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index bab78346fa9f..b6976fbec983 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -17,6 +17,7 @@ compatible = "armadeus,imx28-apf28", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 6c9b498305c0..3a184d13887b 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -7,6 +7,7 @@ compatible = "bluegiga,apx4devkit", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 8337ca21e281..d3e3622979c5 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -17,6 +17,7 @@ compatible = "crystalfontz,cfa10036", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts index f4f2b3d16c8e..19957c2406e8 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -20,6 +20,7 @@ compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 71d0fcbc2d8c..498213137385 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -21,6 +21,7 @@ compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts index 6580ec6e26ba..d38d35b2a93d 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -24,6 +24,7 @@ }; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts index 693634edae99..38160fbd44b6 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -20,6 +20,7 @@ compatible = "i2se,duckbill-2", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index 16f524428ed7..7139c07ae19b 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -19,6 +19,7 @@ compatible = "i2se,duckbill", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts index b70f3349c350..28dab6d3a97c 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts @@ -24,6 +24,7 @@ compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x04000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts index 65efb78ac040..7c3d55277312 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts @@ -23,6 +23,7 @@ compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 5778300f44e8..96c1d106bc64 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -10,6 +10,7 @@ compatible = "fsl,imx28-evk", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 0ec415e1ff58..298ad28caceb 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -16,6 +16,7 @@ compatible = "aries,m28", "denx,m28", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 8883d36a51b5..ece33103a517 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -17,6 +17,7 @@ compatible = "msr,m28cu3", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 893886d17b2d..7d64301529c7 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -1,4 +1,5 @@ /* + * Copyright (C) 2012 Marek Vasut <marex@denx.de> * * The code contained herein is licensed under the GNU General Public diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index ea9212f6ecda..42c88a67912b 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -17,6 +17,7 @@ compatible = "schulercontrol,imx28-sps1", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index dccdd6bcd0b2..e3fd4112e642 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -20,6 +20,7 @@ compatible = "technologic,imx28-ts4600", "fsl,imx28"; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0x10000000>; /* 256MB */ }; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index b8f46432e2a2..164254c28f8e 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -66,6 +66,7 @@ }; memory@40000000 { + device_type = "memory"; reg = <0x40000000 0>; /* will be filled in by U-Boot */ }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 2b7efb659fc0..e14d8ef0158b 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -14,10 +14,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &mac0; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 6ee4ff8e4e8f..9eb960cc02cc 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -17,6 +17,7 @@ compatible = "buglabs,imx31-bug", "fsl,imx31"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128M */ }; }; diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts index db52ddccabc3..d17abdfb6330 100644 --- a/arch/arm/boot/dts/imx31-lite.dts +++ b/arch/arm/boot/dts/imx31-lite.dts @@ -18,6 +18,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index af7afccf5f2f..d7f6fb764997 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -10,10 +10,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { gpio0 = &gpio1; diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi index ba39d938f289..5f8a47a9fcd4 100644 --- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -18,6 +18,7 @@ compatible = "eukrea,cpuimx35", "fsl,imx35"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128M */ }; }; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts index df613e88fd2c..ddce0a844758 100644 --- a/arch/arm/boot/dts/imx35-pdk.dts +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -11,6 +11,7 @@ compatible = "fsl,imx35-pdk", "fsl,imx35"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>, <0x90000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index a1c3d28e8771..59cadeee23ed 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -13,10 +13,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 682a99783ee6..a25da415cb02 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -12,6 +12,7 @@ compatible = "fsl,imx50-evk", "fsl,imx50"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 95b7fba58300..ee1e3e8bf4ec 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -1,15 +1,8 @@ -/* - * Copyright 2013 Greg Ungerer <gerg@uclinux.org> - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2013 Greg Ungerer <gerg@uclinux.org> +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. #include "imx50-pinfunc.h" #include <dt-bindings/gpio/gpio.h> @@ -22,10 +15,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index 79d80036f74d..1eddf2908b3f 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -22,6 +22,7 @@ compatible = "armadeus,imx51-apf51", "fsl,imx51"; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 35ee1b4247c3..ed6a3ce874b2 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -15,6 +15,7 @@ }; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 5761a66e8a0d..82d8df097ef1 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -17,6 +17,7 @@ compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51"; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x08000000>; }; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi index f8902a338e49..2e3125391bc4 100644 --- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi @@ -23,6 +23,7 @@ compatible = "eukrea,cpuimx51", "fsl,imx51"; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x10000000>; /* 256M */ }; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 39eb067904c3..4344632f7940 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -18,6 +18,7 @@ }; memory@90000000 { + device_type = "memory"; reg = <0x90000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 69d753cac89a..a8220f08dcbf 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -53,6 +53,7 @@ /* Will be filled by the bootloader */ memory@90000000 { + device_type = "memory"; reg = <0x90000000 0>; }; @@ -477,6 +478,15 @@ }; &gpio1 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "hp-amp-shutdown-b", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; + unused-sd3-wp-gpio { /* * See pinctrl_esdhc1 below for more details on this @@ -495,9 +505,6 @@ hpa1: amp@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ampgpio>; - power-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; Vdd-supply = <®_3p3v>; }; @@ -671,7 +678,10 @@ }; &iomuxc { - pinctrl_ampgpio: ampgpiogrp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { fsl,pins = < MX51_PAD_GPIO1_9__GPIO1_9 0x5e >; diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts index 243d1c8cab0a..aa91e5dde4b8 100644 --- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts +++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts @@ -18,6 +18,7 @@ /* Will be filled by the bootloader */ memory@90000000 { + device_type = "memory"; reg = <0x90000000 0>; }; diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts index 14b207778114..875b10a7d674 100644 --- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts +++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts @@ -18,6 +18,7 @@ /* Will be filled by the bootloader */ memory@90000000 { + device_type = "memory"; reg = <0x90000000 0>; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 67d462715048..a5ee25cedc10 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -16,10 +16,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -123,6 +121,16 @@ reg = <0x1ffe0000 0x20000>; }; + gpu: gpu@30000000 { + compatible = "amd,imageon-200.1", "amd,imageon"; + reg = <0x30000000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <12>; + interrupt-names = "kgsl_3d0_irq"; + clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>; + clock-names = "core_clk", "mem_iface_clk"; + }; + ipu: ipu@40000000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 117bd002dd1d..7d5a48250f86 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -19,6 +19,7 @@ compatible = "fsl,imx53-ard", "fsl,imx53"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts index cf70ebc4399a..c875e23ee45f 100644 --- a/arch/arm/boot/dts/imx53-cx9020.dts +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -22,6 +22,7 @@ }; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index ce45f08e3051..db2e5bce9b6a 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -16,6 +16,7 @@ compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 50dde84b72ed..f00dda334976 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -11,6 +11,7 @@ }; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 462071c9ddd7..09071ca11c6c 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -12,6 +12,7 @@ compatible = "fsl,imx53-smd", "fsl,imx53"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index a72b8981fc3b..c77d58f06c94 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -17,6 +17,7 @@ compatible = "tq,tqma53", "fsl,imx53"; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x40000000>; /* Up to 1GiB */ }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 54cf3e67069a..4ab135906949 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -51,6 +51,7 @@ /* Will be filled by the bootloader */ memory@70000000 { + device_type = "memory"; reg = <0x70000000 0>; }; diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts index f6268d0ded29..ee6263d1c2d3 100644 --- a/arch/arm/boot/dts/imx53-usbarmory.dts +++ b/arch/arm/boot/dts/imx53-usbarmory.dts @@ -58,6 +58,7 @@ }; memory@70000000 { + device_type = "memory"; reg = <0x70000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index f83a8c62ea53..d595034f3f1b 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -17,12 +17,8 @@ memory@70000000 { device_type = "memory"; - reg = <0x70000000 0x20000000>; - }; - - memory@b0000000 { - device_type = "memory"; - reg = <0xb0000000 0x20000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; regulators { diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 207eb557c90e..b3300300aabe 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -1,14 +1,7 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2011 Freescale Semiconductor, Inc. +// Copyright 2011 Linaro Ltd. #include "imx53-pinfunc.h" #include <dt-bindings/clock/imx5-clock.h> @@ -23,10 +16,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -209,6 +200,16 @@ }; }; + gpu: gpu@30000000 { + compatible = "amd,imageon-200.0", "amd,imageon"; + reg = <0x30000000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <12>; + interrupt-names = "kgsl_3d0_irq"; + clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>; + clock-names = "core_clk", "mem_iface_clk"; + }; + aips@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts index 4a7f86de6c39..6632e99fbb68 100644 --- a/arch/arm/boot/dts/imx6dl-apf6dev.dts +++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts @@ -55,6 +55,7 @@ compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index 29940ba215a8..b16603f27dce 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -49,6 +49,7 @@ compatible = "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts index 240f3661469f..abb2a1b9ce08 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -49,6 +49,7 @@ compatible = "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index ad7733662fe5..b87a85cd44ac 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -28,6 +28,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 64ed84e3c512..e71ad9062fd1 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -17,6 +17,7 @@ compatible = "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index d08e0402793b..d5f7a1703aae 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -55,6 +55,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts index 89384cb618f6..588286adee67 100644 --- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts +++ b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts @@ -23,6 +23,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/imx6dl-emcon-avari.dts new file mode 100644 index 000000000000..407ad8d43c84 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-emcon-avari.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2018 emtrion GmbH +// + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-emcon.dtsi" +#include "imx6qdl-emcon-avari.dtsi" + +/ { + model = "emtrion SoM emCON-MX6 Solo/Dual-Lite Avari"; + compatible = "emtrion,emcon-mx6-avari", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index df8607fe4142..385ce7b0029e 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -13,6 +13,12 @@ model = "BTicino i.MX6DL Mamoj board"; compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; + /* Will be filled by the bootloader */ + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0>; + }; + backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */ diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi index 7d9888937f12..d7e72993eaf8 100644 --- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi @@ -17,6 +17,7 @@ compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index 3fb7f4ee2496..853e58defa9c 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -17,6 +17,7 @@ compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 8e51491e68cf..65c184bb8fb0 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -16,6 +16,7 @@ compatible = "riot,imx6s-riotboard", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts index cc01a7a22e30..3d60cc725d9e 100644 --- a/arch/arm/boot/dts/imx6dl-ts4900.dts +++ b/arch/arm/boot/dts/imx6dl-ts4900.dts @@ -49,6 +49,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/imx6dl-ts7970.dts index 82435d5bf33f..5da6feba2e66 100644 --- a/arch/arm/boot/dts/imx6dl-ts7970.dts +++ b/arch/arm/boot/dts/imx6dl-ts7970.dts @@ -50,6 +50,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts index 738db4fc7702..c2946fbaa0dd 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts index 51de6b4bd7d8..6d1d863c2e3a 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts index b43454deaa1a..4a08d5a99452 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index f0607eb41df4..2ed10310a7b7 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -15,7 +15,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts index 5e72f81cdf8b..07a36bb8075b 100644 --- a/arch/arm/boot/dts/imx6q-apf6dev.dts +++ b/arch/arm/boot/dts/imx6q-apf6dev.dts @@ -55,6 +55,7 @@ compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 953a5b5a8ea4..baadcb7fe011 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -19,6 +19,7 @@ compatible = "fsl,imx6q-arm2", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 3ec58500e9c2..95b8f2d71821 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -98,13 +98,6 @@ line-name = "PCA9539-P04"; }; - P05 { - gpio-hog; - gpios = <5 0>; - output-low; - line-name = "PCA9539-P05"; - }; - P07 { gpio-hog; gpios = <7 0>; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 5650a9b11091..611cb7ae7e55 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -91,13 +91,6 @@ }; &pca9539 { - P05 { - gpio-hog; - gpios = <5 0>; - output-low; - line-name = "PCA9539-P05"; - }; - P07 { gpio-hog; gpios = <7 0>; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 044a5bebe1c5..e4cb118f88c6 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -209,6 +209,22 @@ }; }; +&pca9539 { + P10 { + gpio-hog; + gpios = <8 0>; + output-low; + line-name = "PCA9539-P10"; + }; + + P11 { + gpio-hog; + gpios = <9 0>; + output-low; + line-name = "PCA9539-P11"; + }; +}; + &pci_root { /* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */ bridge@1,0 { diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index e903c488287b..adc9455e42c7 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -47,6 +47,7 @@ / { memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index d3cba09be0cb..fa27dcdf06f1 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -233,20 +233,6 @@ interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - P10 { - gpio-hog; - gpios = <8 0>; - output-low; - line-name = "PCA9539-P10"; - }; - - P11 { - gpio-hog; - gpios = <9 0>; - output-low; - line-name = "PCA9539-P11"; - }; - P12 { gpio-hog; gpios = <10 0>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 18ae4f3be6e3..cab9e92531c7 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -51,6 +51,7 @@ compatible = "compulab,cm-fx6", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts index ad12d76bbb89..e13acbbcdff4 100644 --- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts +++ b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts @@ -23,6 +23,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi index bbba0671f0f4..387801dde02e 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -19,6 +19,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi index 85232c7c36a0..83524bb99eb3 100644 --- a/arch/arm/boot/dts/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -48,6 +48,7 @@ compatible = "lwn,display5", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index b3c6a4a7897d..ee8c38eee03b 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -30,6 +30,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/imx6q-emcon-avari.dts new file mode 100644 index 000000000000..0f582a9d4c0e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-emcon-avari.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2018 emtrion GmbH +// + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-emcon.dtsi" +#include "imx6qdl-emcon-avari.dtsi" + +/ { + model = "emtrion SoM emCON-MX6 Dual/Quad on Avari"; + compatible = "emtrion,emcon-mx6-avari", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index fcd257bc5ac3..c63f371ede8b 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -51,6 +51,7 @@ compatible = "uniwest,imx6q-evi", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 84d3540b3a97..ccc2487d47ca 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -20,6 +20,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index a8f70b4266ef..4038170369fc 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -61,6 +61,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index 714e09e04dcb..b8feadbff967 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -51,6 +51,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts index 302d8d06e4cc..50fbf46d17c2 100644 --- a/arch/arm/boot/dts/imx6q-kp-tpc.dts +++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts @@ -13,6 +13,7 @@ compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index dd763f205819..d8ccb533b6b7 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -48,6 +48,7 @@ compatible = "embest,imx6q-marsboard", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index b7e9f38cec72..74d9824e920b 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -20,6 +20,7 @@ compatible = "lwn,mccmon6", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index fcd824dc485b..61347a545d6c 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -57,6 +57,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index fad858c30fe9..097f2c56c20b 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -17,6 +17,7 @@ compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index a31e83cd07a3..5edf858c8b86 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -57,6 +57,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index d6cae73b1927..aa3004eab06c 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -17,6 +17,7 @@ compatible = "rex,imx6q-rex-pro", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts index b7aa2f0b9f53..3129f727750f 100644 --- a/arch/arm/boot/dts/imx6q-sbc6x.dts +++ b/arch/arm/boot/dts/imx6q-sbc6x.dts @@ -13,6 +13,7 @@ compatible = "microsys,sbc6x", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 505cba776a2d..279b15e9ae2e 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -60,6 +60,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts index e655107edc56..dce1e8671ebe 100644 --- a/arch/arm/boot/dts/imx6q-ts4900.dts +++ b/arch/arm/boot/dts/imx6q-ts4900.dts @@ -49,6 +49,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/imx6q-ts7970.dts index c615ac4feede..570bd3c309a6 100644 --- a/arch/arm/boot/dts/imx6q-ts7970.dts +++ b/arch/arm/boot/dts/imx6q-ts7970.dts @@ -50,6 +50,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts index be85b980bdfe..f6ccbecff92c 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6q-wandboard", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts index fcfba28764d4..55331021d80c 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6q-wandboard", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts index fa36fe183fc0..0be548beef86 100644 --- a/arch/arm/boot/dts/imx6q-wandboard.dts +++ b/arch/arm/boot/dts/imx6q-wandboard.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6q-wandboard", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts index 7da6dde9c857..0f0743db2779 100644 --- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts @@ -50,6 +50,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 8381d24eff7d..d038f4117024 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -202,6 +202,7 @@ <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; power-domains = <&pd_pu>; + #cooling-cells = <2>; }; ipu2: ipu@2800000 { diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 3dc99dd8dde1..8380f1b26826 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -49,6 +49,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 9332a31e6c8b..e3be453d8a4a 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -44,6 +44,7 @@ / { /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi new file mode 100644 index 000000000000..828cf3e39784 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2018 emtrion GmbH +// + +/ { + aliases { + boardid = &boardid; + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + mmc3 = &usdhc4; + }; + + reg_wall_5p0: reg-wall5p0 { + compatible = "regulator-fixed"; + regulator-name = "Main-Supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_base3p3: reg-base3p3 { + compatible = "regulator-fixed"; + vin-supply = <®_wall_5p0>; + regulator-name = "3V3-avari"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_base1p5: reg-base1p5 { + compatible = "regulator-fixed"; + vin-supply = <®_base3p3>; + regulator-name = "1V5-avari"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_usb_otg: reg-otgvbus { + compatible = "regulator-fixed"; + vin-supply = <®_wall_5p0>; + regulator-name = "OTG_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + clk_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "emCON-avari-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&ecspi2 { + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_codec>; + VDDA-supply = <®_base3p3>; + VDDIO-supply = <®_base3p3>; + }; + + captouch: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + + boardid: gpio@3a { + compatible = "nxp,pca8574"; + reg = <0x3a>; + gpio-controller; + #gpio-cells = <1>; + }; +}; + +&pcie { + status = "okay"; +}; + +&rgb_encoder { + status = "okay"; +}; + +&rgb_panel { + compatible = "edt,etm0700g0bdh6"; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart2 { + status = "okay"; + uart-has-rtscts; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi new file mode 100644 index 000000000000..397e205551c4 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi @@ -0,0 +1,833 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2018 emtrion GmbH +// + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/input/input.h> + +/ { + + model = "emtrion SoM emCON-MX6"; + compatible = "emtrion,emcon-mx6"; + + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + rtc0 = &ds1307; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emcon_wake>; + + wake { + label = "Wake"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + som_leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_som_leds>; + + green { + label = "som:green"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + red { + label = "som:red"; + gpios = <&gpio3 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + }; + + lvds_backlight: lvds-backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_bl>; + enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; + pwms = <&pwm1 0 50000>; + brightness-levels = < + 0 4 8 16 32 64 80 96 112 + 128 144 160 176 250 + >; + default-brightness-level = <13>; + status = "okay"; + }; + + pwm_fan: pwm-fan { + compatible = "pwm-fan"; + cooling-min-state = <0>; + cooling-max-state = <4>; + #cooling-cells = <2>; + pwms = <&pwm4 0 50000>; + cooling-levels = <0 64 127 191 255>; + status = "disabled"; + }; + + + rgb_encoder: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgb24_display>; + status = "disabled"; + + port@0 { + reg = <0>; + + rgb_encoder_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + rgb_encoder_out: endpoint { + remote-endpoint = <&rgb_panel_in>; + }; + }; + }; + + rgb_panel: lcd { + backlight = <&rgb_backlight>; + power-supply = <®_parallel_disp>; + + port { + rgb_panel_in: endpoint { + remote-endpoint = <&rgb_encoder_out>; + }; + }; + }; + + reg_parallel_disp: reg-parallel-display { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgb_bl_en>; + regulator-name = "LCD-Supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lvds_disp: reg-lvds-display { + compatible = "regulator-fixed"; + regulator-name = "LVDS-Supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + rgb_backlight: rgb-backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgb_bl>; + enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + pwms = <&pwm3 0 5000000>; + brightness-levels = < + 250 176 160 144 128 112 + 96 80 64 48 32 16 8 1 + >; + default-brightness-level = <13>; + status = "okay"; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, + <&gpio2 27 GPIO_ACTIVE_HIGH>; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nor_flash>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + phy-reset-duration = <50>; + phy-supply = <&vdd_1V8_reg>; + phy-handle = <&ksz9031>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ksz9031: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + rxdv-skew-ps = <480>; + txen-skew-ps = <480>; + rxd0-skew-ps = <480>; + rxd1-skew-ps = <480>; + rxd2-skew-ps = <480>; + rxd3-skew-ps = <480>; + txd0-skew-ps = <420>; + txd1-skew-ps = <420>; + txd2-skew-ps = <360>; + txd3-skew-ps = <360>; + txc-skew-ps = <1020>; + rxc-skew-ps = <960>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + da9063: pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + onkey { + compatible = "dlg,da9063-onkey"; + wakeup-source; + }; + + watchdog { + compatible = "dlg,da9063-watchdog"; + timeout-sec = <0>; + }; + + regulators { + vddcore_reg: bcore1 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <2>; + regulator-name = "DA9063_CORE"; + regulator-always-on; + }; + + vddsoc_reg: bcore2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <2>; + regulator-name = "DA9063_SOC"; + regulator-always-on; + }; + + vdd_ddr3_reg: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <2>; + regulator-always-on; + }; + + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <2>; + regulator-always-on; + }; + + vdd_sata_reg: ldo3 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + vdd_mipi_reg: ldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_mx6_snvs_reg: ldo5 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_hdmi_reg: ldo6 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_pcie_reg: ldo7 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_1V8_reg: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_3V3_sdc_reg: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_1V2_reg: ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + }; + + ds1307: rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; +}; + +&iomuxc { + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b060 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130B0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b060 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b1 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b1 + >; + }; + + pinctrl_cpi1: csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b1 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b1 + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b1 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b1 + >; + }; + + /*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/ + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 + >; + }; + + pinctrl_emcon_gpio1: emcongpio1 { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio2: emcongpio2 { + fsl,pins = < + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio3: emcongpio3 { + fsl,pins = < + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio4: emcongpio4 { + fsl,pins = < + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio5: emcongpio5 { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio6: emcongpio6 { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio7: emcongpio7 { + fsl,pins = < + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0b0b1 + >; + }; + + pinctrl_emcon_gpio8: emcongpio8 { + fsl,pins = < + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0b0b1 + >; + }; + + pinctrl_emcon_irq_a: emconirqa { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x0b0b1 + >; + }; + + pinctrl_emcon_irq_b: emconirqb { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x0b0b1 + >; + }; + + pinctrl_emcon_irq_c: emconirqc { + fsl,pins = < + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0b0b1 + >; + }; + + pinctrl_emcon_irq_pwr: emconirqpwr { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0b0b1 + >; + }; + + pinctrl_emcon_wake: emconwake { + fsl,pins = < + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x4001a0b1 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b058 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4000b070 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b870 + >; + }; + + pinctrl_irq_touch1: irqtouch1 { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x0b0b1 + >; + }; + + pinctrl_irq_touch2: irqtouch2 { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x0b0b1 + >; + }; + + pinctrl_lvds_bl: lvdsbacklightgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b1 + >; + }; + + pinctrl_lvds_reg: lvdsreggrp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x0b0b1 + >; + }; + + + pinctrl_nor_flash: norflashgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b1 + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 + >; + }; + + pinctrl_pcie_ctrl: pciegrp { + fsl,pins = < + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0b0b1 + >; + }; + + pinctrl_pwm_fan: pwmfan { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x0b0b1 + >; + }; + + pinctrl_rgb_bl: rgbbacklightgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b1 + >; + }; + + pinctrl_rgb_bl_en: rgbenable { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x0b0b1 + >; + }; + + pinctrl_rgb24_display: rgbgrp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_secure: securegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1 + >; + }; + + pinctrl_som_leds: somledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x0b0b1 + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x0b0b1 + >; + }; + + pinctrl_spdif_in: spdifin { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + >; + }; + + pinctrl_spdif_out: spdifout { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usb_host1: usbhgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__USB_H1_PWR 0x1B058 + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1B058 + >; + }; + + pinctrl_usb_otg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x17059 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b1 + MX6QDL_PAD_DI0_PIN4__SD1_WP 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__SD2_CD_B 0x1b0b1 + MX6QDL_PAD_GPIO_2__SD2_WP 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&rgb_encoder_in>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_ctrl>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_host1>; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg>; + vbus-supply = <®_usb_otg>; + dr_mode = "peripheral"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + fsl,wp-controller; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + fsl,wp-controller; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + bus-width = <8>; + status = "okay"; +}; + +/******device power Management*********/ + +&cpu0 { + voltage-tolerance = <2>; +}; + +®_arm { + vin-supply = <&vddcore_reg>; +}; + +®_soc { + vin-supply = <&vddsoc_reg>; +}; + +®_pu { + vin-supply = <&vddsoc_reg>; +}; + +/*******Disabled HW following***********/ + +&snvs_rtc { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 17a7b9c083d0..d3609966b846 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -45,6 +45,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index b8044681006c..2ff377d0df7e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -60,6 +60,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 629908fbaa32..68ab54351109 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -60,6 +60,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index a1a6fb5541e1..81b2fcf6eedf 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -60,6 +60,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 4e21b3849394..8e46a80f57a4 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -75,6 +75,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 81dae5b5bc87..dacc2a14d0e7 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -52,6 +52,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index c5d95e8d2e09..a1066897be18 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -81,6 +81,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index b5986efe1090..e8e36dfd0a6b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -114,6 +114,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index 368132274a91..9cb9a7439121 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -84,6 +84,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 3c52bdb453f3..6d21cc6a9d4b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -94,6 +94,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 0e64016e765f..2ffb21dd89f2 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -43,6 +43,7 @@ / { /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index c413f9c3540f..e4231331f04e 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -43,6 +43,7 @@ / { /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index ba93026ecee8..1d1b4bd0670f 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -10,6 +10,7 @@ / { memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 84d03c65f4c8..7814f1ef0804 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -10,9 +10,14 @@ / { memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; + chosen { + stdout-path = &uart4; + }; + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm3 0 100000>; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 29baf25ae5d0..7a85116ef1d2 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -11,6 +11,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 39200e5dc896..c3415aa348a2 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -11,6 +11,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0xF0000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 572abd7499b1..ed53f07c6b7b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -11,6 +11,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 98384a6c5d12..8b0e432099b5 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -13,6 +13,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index ed1aafd56973..1b50b01e9bac 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -16,6 +16,7 @@ compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index a6dc5c42c632..1280de50a984 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -12,6 +12,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; @@ -75,39 +76,49 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + reg_audio: regulator-audio { + compatible = "regulator-fixed"; + regulator-name = "cs42888_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_audio: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "cs42888_supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + regulator-name = "can-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can_stby: regulator-can-stby { + compatible = "regulator-fixed"; + regulator-name = "can-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can_en>; }; sound-cs42888 { @@ -288,6 +299,20 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_stby>; + status = "disabled"; /* pin conflict with fec */ +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; @@ -503,6 +528,20 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x17059 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x17059 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x17059 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x17059 + >; + }; + pinctrl_gpio_keys: gpiokeysgrp { fsl,pins = < MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 @@ -758,6 +797,10 @@ status = "okay"; }; +&pcie { + status = "okay"; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdif>; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 654cf2c9b073..8468216dae9b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -50,6 +50,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 6e46a195b399..8930aec6464c 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -13,55 +13,58 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - vin-supply = <&swbst_reg>; - }; - - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 29 0>; - enable-active-high; - vin-supply = <&swbst_reg>; - }; - - reg_audio: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "wm8962-supply"; - gpio = <&gpio4 10 0>; - enable-active-high; - }; - - reg_pcie: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie_reg>; - regulator-name = "MPCIE_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio3 19 0>; - enable-active-high; - }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&swbst_reg>; + }; + + reg_audio: regulator-audio { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply"; + gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sensors: regulator-sensors { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensors_reg>; + regulator-name = "sensors-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; }; gpio-keys { @@ -240,6 +243,15 @@ >; }; + accelerometer@1c { + compatible = "fsl,mma8451"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_mma8451_int>; + interrupt-parent = <&gpio1>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + }; + ov5642: camera@3c { compatible = "ovti,ov5642"; pinctrl-names = "default"; @@ -272,6 +284,16 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_egalax_int>; + interrupt-parent = <&gpio6>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + }; + ov5640: camera@3c { compatible = "ovti,ov5640"; pinctrl-names = "default"; @@ -410,6 +432,24 @@ interrupts = <7 2>; wakeup-gpios = <&gpio6 7 0>; }; + + magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; + interrupt-parent = <&gpio3>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + }; + + light-sensor@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_isl29023_int>; + interrupt-parent = <&gpio3>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; }; &iomuxc { @@ -491,6 +531,12 @@ >; }; + pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0xb0b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 @@ -498,6 +544,12 @@ >; }; + pinctrl_i2c2_egalax_int: i2c2egalaxintgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 @@ -505,6 +557,18 @@ >; }; + pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1 + >; + }; + + pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1 + >; + }; + pinctrl_ipu1_csi0: ipu1csi0grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 @@ -553,6 +617,12 @@ >; }; + pinctrl_sensors_reg: sensorsreggrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index a98fb2564c63..c68cb90fd801 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -62,6 +62,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; /* will be filled by U-Boot */ }; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 4f27861bbb32..776bfc77f89d 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -32,6 +32,7 @@ }; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; @@ -195,6 +196,13 @@ >; }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + pinctrl_usbh: usbhgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 @@ -265,6 +273,12 @@ status = "okay"; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh>; diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi index 38080c1dfaec..8752a4961c47 100644 --- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi +++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi @@ -11,6 +11,7 @@ / { memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi index 855dc6f9df75..e781a45785ed 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -1,13 +1,8 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. +// +// Author: Fabio Estevam <fabio.estevam@freescale.com> #include "imx6qdl-wandboard.dtsi" diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi index 49a0a557e62e..3874e74703f0 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -1,13 +1,8 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. +// +// Author: Fabio Estevam <fabio.estevam@freescale.com> #include "imx6qdl-wandboard.dtsi" diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi index 69d9c8661439..93909796885a 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi @@ -1,13 +1,8 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * Author: Fabio Estevam <fabio.estevam@freescale.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2013 Freescale Semiconductor, Inc. +// +// Author: Fabio Estevam <fabio.estevam@freescale.com> #include "imx6qdl-wandboard.dtsi" diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 85e79a33bcd4..69942c7ff89d 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -609,13 +609,14 @@ }; touchscreen@2a { - compatible = "eeti,egalax_ts"; + compatible = "eeti,exc3000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ts>; reg = <0x2a>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - wakeup-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e4daf150881a..fe17a3405edc 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -13,10 +13,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -77,6 +75,7 @@ fsl,tempmon = <&anatop>; fsl,tempmon-data = <&ocotp>; clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; }; ldb: ldb { @@ -139,6 +138,16 @@ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; }; + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -216,6 +225,7 @@ <&clks IMX6QDL_CLK_GPU3D_SHADER>; clock-names = "bus", "core", "shader"; power-domains = <&pd_pu>; + #cooling-cells = <2>; }; gpu_2d: gpu@134000 { @@ -226,6 +236,7 @@ <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; power-domains = <&pd_pu>; + #cooling-cells = <2>; }; timer@a00600 { @@ -548,6 +559,7 @@ clocks = <&clks IMX6QDL_CLK_CAN1_IPG>, <&clks IMX6QDL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x34 28 0x10 17>; status = "disabled"; }; @@ -558,6 +570,7 @@ clocks = <&clks IMX6QDL_CLK_CAN2_IPG>, <&clks IMX6QDL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x34 29 0x10 18>; status = "disabled"; }; @@ -981,6 +994,8 @@ reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + phy_type = "hsic"; fsl,usbmisc = <&usbmisc 2>; dr_mode = "host"; ahb-burst-config = <0x0>; @@ -994,6 +1009,8 @@ reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop2>; + phy_type = "hsic"; fsl,usbmisc = <&usbmisc 3>; dr_mode = "host"; ahb-burst-config = <0x0>; @@ -1115,6 +1132,7 @@ mmdc0: mmdc@21b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>; }; mmdc1: mmdc@21b4000 { /* MMDC1 */ diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts index bcca5ac5fa51..08d8b78a2096 100644 --- a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts @@ -13,6 +13,7 @@ compatible = "wand,imx6qp-wandboard", "fsl,imx6qp"; memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts index 8c293e9f36a7..98bf7a6b2850 100644 --- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -50,6 +50,7 @@ /* Will be filled by the bootloader */ memory@10000000 { + device_type = "memory"; reg = <0x10000000 0>; }; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 679b4482ab13..f7a48e4622e1 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -17,6 +17,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 404e602e6781..408da704c459 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -55,6 +55,7 @@ compatible = "warp,imx6sl-warp", "fsl,imx6sl"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 7a3ae7160c12..e7524e73efb4 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -13,10 +13,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -110,6 +108,11 @@ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; }; + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -588,7 +591,6 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-always-on; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; @@ -815,6 +817,8 @@ reg = <0x02184400 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + phy_type = "hsic"; fsl,usbmisc = <&usbmisc 2>; dr_mode = "host"; ahb-burst-config = <0x0>; @@ -921,6 +925,7 @@ mmdc: mmdc@21b0000 { compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>; }; rngb: rngb@21b4000 { diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index c8e115564ba2..d8163705363e 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -20,6 +20,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x80000000>; }; @@ -31,6 +32,18 @@ status = "okay"; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user { + label = "debug"; + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + reg_usb_otg1_vbus: regulator-otg1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -301,6 +314,12 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; +}; + &iomuxc { pinctrl_reg_sd3_vmmc: sd3vmmcgrp { fsl,pins = < @@ -455,9 +474,21 @@ >; }; + pinctrl_led: ledgrp { + fsl,pins = < + MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x17059 + >; + }; + pinctrl_pwm1: pmw1grp { fsl,pins = < MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 >; }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX6SLL_PAD_WDOG_B__WDOG1_B 0x170b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index beefa1b2049d..62847c68330b 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -593,7 +593,6 @@ #interrupt-cells = <3>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; - fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>; }; iomuxc: pinctrl@20e0000 { @@ -770,6 +769,7 @@ mmdc: memory-controller@21b0000 { compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>; }; ocotp: ocotp-ctrl@21bc000 { diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index adb5cc7d8ce2..832b5c5d7441 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -12,6 +12,7 @@ compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 841a27f3198f..b0ee324afe58 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -11,6 +11,7 @@ compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x80000000>; }; @@ -36,6 +37,35 @@ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + reg_can_wake: regulator-can-wake { + compatible = "regulator-fixed"; + regulator-name = "can-wake"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + regulator-name = "can-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can_wake>; + }; + + reg_can_stby: regulator-can-stby { + compatible = "regulator-fixed"; + regulator-name = "can-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can_en>; + }; }; &anaclk2 { @@ -75,6 +105,20 @@ status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -149,6 +193,20 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 9cc6ff206aea..00c485482301 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. #include "imx6sx-sdb.dtsi" @@ -132,13 +128,29 @@ #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; - flash1: s25fl128s@1 { - reg = <1>; + flash1: s25fl128s@2 { + reg = <2>; #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; }; + +®_can_en { + /* Transceiver EN/STBY is active high on RevA board */ + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + enable-active-high; +}; + +®_can_stby { + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can_en>; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts index 2ac865b7c364..1c4eacd68e1b 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-sai.dts @@ -1,43 +1,6 @@ -/* - * Copyright (C) 2016 NXP Semiconductors - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (C) 2016 Freescale Semiconductor, Inc. #include "imx6sx-sdb.dts" diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 6dd9bebfe027..998e3e13a005 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. #include "imx6sx-sdb.dtsi" @@ -117,15 +113,19 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; - flash1: n25q256a@1 { + flash1: n25q256a@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; - reg = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <2>; }; }; @@ -136,3 +136,8 @@ ®_soc { vin-supply = <&sw1a_reg>; }; + +®_can_stby { + /* Transceiver EN/STBY is active low on RevB board */ + gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 7d7d679945d2..08ede56c3f10 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. /dts-v1/; @@ -21,6 +17,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; @@ -140,6 +137,20 @@ regulator-max-microvolt = <5000000>; }; + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + regulator-name = "can-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_can_stby: regulator-can-stby { + compatible = "regulator-fixed"; + regulator-name = "can-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound { compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; model = "wm8962-audio"; @@ -207,6 +218,20 @@ status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -404,6 +429,20 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020 + >; + }; + pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 252175b59247..2bc51623a806 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -21,6 +21,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts index 40ccdf43dffc..db0feb9b9f5d 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts @@ -49,6 +49,7 @@ compatible = "udoo,neobasic", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts index 42bfc8f8f7f6..5c7a2bb9141c 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts @@ -49,6 +49,7 @@ compatible = "udoo,neoextended", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts index c84c877f09d4..13dfe2afaba5 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts @@ -49,6 +49,7 @@ compatible = "udoo,neofull", "fsl,imx6sx"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 95a3c1cb877d..272ff6133ec1 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -15,10 +15,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { can0 = &flexcan1; @@ -159,6 +157,11 @@ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; }; + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -448,6 +451,7 @@ clocks = <&clks IMX6SX_CLK_CAN1_IPG>, <&clks IMX6SX_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 1 0x10 17>; status = "disabled"; }; @@ -458,6 +462,7 @@ clocks = <&clks IMX6SX_CLK_CAN2_IPG>, <&clks IMX6SX_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 2 0x10 18>; status = "disabled"; }; @@ -558,7 +563,7 @@ compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_DUMMY>; + clocks = <&clks IMX6SX_CLK_IPG>; status = "disabled"; }; @@ -566,14 +571,14 @@ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_DUMMY>; + clocks = <&clks IMX6SX_CLK_IPG>; }; wdog2: wdog@20c0000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_DUMMY>; + clocks = <&clks IMX6SX_CLK_IPG>; status = "disabled"; }; @@ -877,6 +882,7 @@ reg = <0x02184400 0x200>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc 2>; phy_type = "hsic"; fsl,anatop = <&anatop>; @@ -1002,6 +1008,7 @@ mmdc: mmdc@21b0000 { compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>; }; fec2: ethernet@21b4000 { @@ -1193,11 +1200,11 @@ }; pxp: pxp@2218000 { + compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp"; reg = <0x02218000 0x4000>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_PXP_AXI>, - <&clks IMX6SX_CLK_DISPLAY_AXI>; - clock-names = "pxp-axi", "disp-axi"; + clocks = <&clks IMX6SX_CLK_PXP_AXI>; + clock-names = "axi"; status = "disabled"; }; @@ -1269,7 +1276,7 @@ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x02288000 0x4000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_DUMMY>; + clocks = <&clks IMX6SX_CLK_IPG>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 32a07232c034..9207d5d071f1 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. / { chosen { @@ -12,6 +8,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; @@ -33,6 +30,14 @@ enable-active-high; }; + reg_can_3v3: regulator-can-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "mx6ul-wm8960"; @@ -67,6 +72,28 @@ }; }; + spi4 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi4>; + status = "okay"; + gpio-sck = <&gpio5 11 0>; + gpio-mosi = <&gpio5 10 0>; + cs-gpios = <&gpio5 7 0>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + gpio_spi: gpio@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + }; + }; + panel { compatible = "innolux,at043tn24"; backlight = <&backlight_display>; @@ -133,6 +160,20 @@ }; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -176,6 +217,8 @@ #size-cells = <1>; compatible = "micron,n25q256a"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; @@ -418,6 +461,15 @@ >; }; + pinctrl_spi4: spi4grp { + fsl,pins = < + MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 + MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 + >; + }; + pinctrl_tsc: tscgrp { fsl,pins = < MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index 11966d12af76..3749fdda3611 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -24,6 +24,18 @@ status = "okay"; }; + panel { + compatible = "auo,g101evn010", "simple-panel"; + power-supply = <&ldo4_ext>; + backlight = <&lcd_backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + reg_usb_otg1_vbus: regulator-usb-otg1 { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -105,6 +117,19 @@ }; }; +&i2c1 { + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_goodix_touch>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat0_17 @@ -112,6 +137,12 @@ &pinctrl_lcdif_hvsync>; lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &ldo4_ext { @@ -272,6 +303,12 @@ >; }; + pinctrl_goodix_touch: goodixgrp{ + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020 + >; + }; + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi index c71a84da1af0..b5781c3656d1 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi @@ -7,6 +7,11 @@ */ / { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; /* will be filled by U-Boot */ + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -161,6 +166,25 @@ }; }; +/* UART1 (Bluetooth) */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +/* USDHC1 (Wireless) */ +&usdhc1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>; + pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>; + non-removable; + no-1-8-v; + bus-width = <4>; + status = "okay"; +}; + &iomuxc { pinctrl_gpmi_nand: gpmigrp { fsl,pins = < @@ -179,15 +203,60 @@ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1 - >; - }; + >; + }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 - >; - }; + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17051 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_sleep: usdhc1grp-sleep { + fsl,pins = < + MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000 + MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000 + MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x3000 + MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x3000 + MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x3000 + MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x3000 + >; + }; + + pinctrl_wifibt_ctrl: wifibt-ctrl-grp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x08a0 + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x08a0 + >; + }; + + pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000 + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000 + >; + }; }; ®_arm { diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts index e22ec5be2b78..bc77f26a2f1d 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dts +++ b/arch/arm/boot/dts/imx6ul-geam.dts @@ -15,6 +15,7 @@ compatible = "engicam,imx6ul-geam", "fsl,imx6ul"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index b1fa3f0a684d..213e802bf35c 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -10,6 +10,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi index 8f775f6974d1..8d6893210842 100644 --- a/arch/arm/boot/dts/imx6ul-litesom.dtsi +++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi @@ -48,6 +48,7 @@ compatible = "grinn,imx6ul-litesom", "fsl,imx6ul"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi index a031bee311df..cf7faf4b9c47 100644 --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -49,6 +49,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0>; /* will be filled by U-Boot */ }; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 0c09420f9951..39eeeddac39e 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -1,123 +1,33 @@ -/* - * Copyright 2015 Technexion Ltd. - * - * Author: Wig Cheng <wig.cheng@technexion.com> - * Richard Hu <richard.hu@technexion.com> - * Tapani Utriainen <tapani@technexion.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> /dts-v1/; -#include "imx6ul.dtsi" - +#include "imx6ul-pico.dtsi" / { - model = "Technexion Pico i.MX6UL Board"; + model = "TechNexion PICO-IMX6UL and HOBBIT baseboard"; compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul"; - /* Will be filled by the bootloader */ - memory@80000000 { - reg = <0x80000000 0>; - }; - - chosen { - stdout-path = &uart6; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - status = "okay"; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_sd1_vmmc: regulator-sd1-vmmc { - compatible = "regulator-fixed"; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usb_otg_vbus: regulator-usb-otg-vbus { - compatible = "regulator-fixed"; + leds { + compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 6 0>; - }; + pinctrl-0 = <&pinctrl_gpio_leds>; - reg_brcm: regulator-brcm { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_brcm_reg>; - regulator-name = "brcm_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <200000>; + led { + label = "gpio-led"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; }; sound { compatible = "fsl,imx-audio-sgtl5000"; model = "imx6ul-sgtl5000"; audio-cpu = <&sai1>; - audio-codec = <&codec>; + audio-codec = <&sgtl5000>; audio-routing = "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", @@ -130,92 +40,6 @@ #clock-cells = <0>; clock-frequency = <24576000>; }; - - leds { - compatible = "gpio-leds"; - - hobbitled { - label = "hobbitled"; - gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&clks { - assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; - assigned-clock-rates = <786432000>; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2>; - phy-mode = "rmii"; - phy-handle = <ðphy1>; - status = "okay"; - phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - max-speed = <100>; - interrupt-parent = <&gpio5>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW>; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - pmic: pfuze3000@8 { - compatible = "fsl,pfuze3000"; - reg = <0x08>; - - regulators { - /* VDD_ARM_SOC_IN*/ - sw1b_reg: sw1b { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - /* DRAM */ - sw3a_reg: sw3 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - regulator-always-on; - }; - - /* DRAM */ - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - }; - }; }; &i2c2 { @@ -224,7 +48,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - codec: sgtl5000@a { + sgtl5000: codec@a { reg = <0x0a>; compatible = "fsl,sgtl5000"; clocks = <&sys_mclk>; @@ -234,317 +58,43 @@ }; &i2c3 { - clock_frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; -}; - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33200000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <210>; - hback-porch = <46>; - hsync-len = <1>; - vback-porch = <22>; - vfront-porch = <23>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; + polytouch: touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; }; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&pwm7 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm7>; - status = "okay"; -}; - -&pwm8 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm8>; - status = "okay"; -}; - -&sai1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - uart-has-rtscts; - status = "okay"; -}; - -&uart6 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart6>; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1_id>; - dr_mode = "otg"; - disable-over-current; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - bus-width = <8>; - no-1-8-v; - non-removable; - keep-power-in-suspend; - status = "okay"; -}; - -&usdhc2 { /* Wifi SDIO */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - no-1-8-v; - non-removable; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_brcm>; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; + adc081c: adc@50 { + compatible = "ti,adc081c"; + reg = <0x50>; + vref-supply = <®_3p3v>; + }; }; &iomuxc { - pinctrl_brcm_reg: brcmreggrp { - fsl,pins = < - MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x10b0 /* WL_REG_ON */ - MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x10b0 /* WL_HOST_WAKE */ - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x1b0b0 - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 - MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x800 - MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x79 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 - MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 - MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x4001b8b0 - MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x4001b8b0 - >; - }; - - pinctrl_lcdif_dat: lcdifdatgrp { - fsl,pins = < - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 - MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 - MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 - MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 - MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 - MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 - MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 - >; - }; - - pinctrl_lcdif_ctrl: lcdifctrlgrp { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 - /* LCD reset */ - MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6UL_PAD_NAND_ALE__PWM3_OUT 0x110b0 - >; - }; - - pinctrl_pwm7: pwm7grp { - fsl,pins = < - MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x110b0 - >; - }; - - pinctrl_pwm8: pwm8grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 - >; - }; - - pinctrl_sai1: sai1grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b0 - MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b0 - MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 - MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b0 - MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b0 - MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b0 - MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b0 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x1b0b1 - MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x1b0b1 - MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 - MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 - >; - }; - - pinctrl_uart6: uart6grp { - fsl,pins = < - MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 - MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usb_otg1: usbotg1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x10b0 - >; - }; - - pinctrl_usb_otg1_id: usbotg1idgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029 - MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 - MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 - MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 - MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 - >; - }; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; - pinctrl_usdhc2: usdhc2grp { + pinctrl_hog: hoggrp { fsl,pins = < - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0 + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x10b0 + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x10b0 >; }; - pinctrl_wdog: wdoggrp { + pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < - MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10b0 >; }; }; diff --git a/arch/arm/boot/dts/imx6ul-pico-pi.dts b/arch/arm/boot/dts/imx6ul-pico-pi.dts new file mode 100644 index 000000000000..de07357b27fc --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-pico-pi.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx6ul-pico.dtsi" +/ { + model = "TechNexion PICO-IMX6UL and PI baseboard"; + compatible = "technexion,imx6ul-pico-pi", "fsl,imx6ul"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6ul-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c3 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + polytouch: touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0 + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x10b0 + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x10b0 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x10b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi new file mode 100644 index 000000000000..de9f83189ba8 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-pico.dtsi @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx6ul.dtsi" + +/ { + /* Will be filled by the bootloader */ + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; + }; + + chosen { + stdout-path = &uart6; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 6 0>; + }; + + reg_brcm: regulator-brcm { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + regulator-name = "brcm_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + max-speed = <100>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze3000@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + /* VDD_ARM_SOC_IN*/ + sw1b_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* DRAM */ + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + /* DRAM */ + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: timing0 { + clock-frequency = <33200000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <210>; + hback-porch = <46>; + hsync-len = <1>; + vback-porch = <22>; + vfront-porch = <23>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc2 { /* Wifi SDIO */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_brcm>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_brcm_reg: brcmreggrp { + fsl,pins = < + MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x10b0 /* WL_REG_ON */ + MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x10b0 /* WL_HOST_WAKE */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x800 + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x79 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x4001b8b0 + MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + /* LCD reset */ + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x110b0 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x110b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b0 + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b0 + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b0 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b0 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b0 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b0 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 02b5ba42cd59..bb6dbfd5546b 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -71,6 +71,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0>; /* will be filled by U-Boot */ }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 083d3446c41d..62ed30c781ed 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -15,10 +15,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { ethernet0 = &fec1; @@ -96,7 +94,7 @@ intc: interrupt-controller@a01000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; #interrupt-cells = <3>; interrupt-controller; interrupt-parent = <&intc>; @@ -108,10 +106,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&intc>; status = "disabled"; }; @@ -185,7 +183,7 @@ clocks = <&clks IMX6UL_CLK_APBHDMA>; }; - gpmi: gpmi-nand@1806000 { + gpmi: gpmi-nand@1806000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -408,6 +406,7 @@ clocks = <&clks IMX6UL_CLK_CAN1_IPG>, <&clks IMX6UL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 1 0x10 17>; status = "disabled"; }; @@ -418,6 +417,7 @@ clocks = <&clks IMX6UL_CLK_CAN2_IPG>, <&clks IMX6UL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 2 0x10 18>; status = "disabled"; }; @@ -917,6 +917,7 @@ mmdc: mmdc@21b0000 { compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>; }; weim: weim@21b8000 { diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts index 0ba64546c13b..74aaa8a56a3d 100644 --- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts @@ -1,43 +1,6 @@ -/* - * Copyright (C) 2016 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (C) 2016 Freescale Semiconductor, Inc. /dts-v1/; diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi index 10ab4697950f..fb213bec4654 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi @@ -7,6 +7,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 183193e8580d..038d8c90f6df 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -7,6 +7,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index 796ed35d4ac9..f3668fe69eac 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -39,6 +39,16 @@ reg = <0x02200000 0x100000>; ranges; + dcp: crypto@2280000 { + compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp"; + reg = <0x02280000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6ULL_CLK_DCP_CLK>; + clock-names = "dcp"; + }; + iomuxc_snvs: iomuxc-snvs@2290000 { compatible = "fsl,imx6ull-iomuxc-snvs"; reg = <0x02290000 0x4000>; diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts index 6f1af240e0ce..483d9732c002 100644 --- a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts @@ -9,6 +9,8 @@ /delete-node/ &fec1; /delete-node/ &fec2; +/delete-node/ &can1; +/delete-node/ &can2; /delete-node/ &lcdif; /delete-node/ &tsc; diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi index ae6d7e593769..0b5f1a763567 100644 --- a/arch/arm/boot/dts/imx6ulz.dtsi +++ b/arch/arm/boot/dts/imx6ulz.dtsi @@ -20,8 +20,6 @@ }; /delete-node/ &adc1; -/delete-node/ &can1; -/delete-node/ &can2; /delete-node/ &ecspi3; /delete-node/ &ecspi4; /delete-node/ &epit2; diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 8bf365d28cac..e61567437d73 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -19,6 +19,7 @@ compatible = "compulab,cl-som-imx7", "fsl,imx7d"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ }; @@ -284,4 +285,4 @@ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ >; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi index 04d24ee17b14..898f4b8d7421 100644 --- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi @@ -8,6 +8,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index d9f8fb69511b..e2e327f437e3 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -45,6 +45,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 177d21fdeb28..6b4acea1ef79 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -12,6 +12,7 @@ compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts new file mode 100644 index 000000000000..7b2198a9372c --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright 2017 NXP + +#include "imx7d-pico.dtsi" + +/ { + model = "TechNexion PICO-IMX7D Board using Hobbit baseboard"; + compatible = "technexion,imx7d-pico-hobbit", "fsl,imx7d"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + }; + }; +}; + +&i2c1 { + sgtl5000: codec@a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_vref_1v8>; + }; +}; + +&i2c4 { + status = "okay"; + + adc081c: adc@50 { + compatible = "ti,adc081c"; + reg = <0x50>; + vref-supply = <®_3p3v>; + }; +}; + +&ecspi3 { + ads7846@0 { + reg = <0>; + compatible = "ti,ads7846"; + interrupt-parent = <&gpio2>; + interrupts = <7 0>; + spi-max-frequency = <1000000>; + pendown-gpio = <&gpio2 7 0>; + vcc-supply = <®_3p3v>; + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <4095>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <4095>; + ti,pressure-max = /bits/ 16 <1024>; + ti,x-plate-ohms = /bits/ 16 <90>; + ti,y-plate-ohms = /bits/ 16 <90>; + ti,debounce-max = /bits/ 16 <70>; + ti,debounce-tol = /bits/ 16 <3>; + ti,debounce-rep = /bits/ 16 <2>; + ti,settle-delay-usec = /bits/ 16 <150>; + wakeup-source; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts index ee02d931cf49..70bea95c06d8 100644 --- a/arch/arm/boot/dts/imx7d-pico-pi.dts +++ b/arch/arm/boot/dts/imx7d-pico-pi.dts @@ -1,48 +1,24 @@ -/* - * Copyright 2017 NXP - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright 2017 NXP #include "imx7d-pico.dtsi" / { + model = "TechNexion PICO-IMX7D Board and PI baseboard"; + compatible = "technexion,imx7d-pico-pi", "fsl,imx7d"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -54,43 +30,14 @@ }; dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; + sound-dai = <&sgtl5000>; clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; }; }; }; -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>; - assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; - assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - status = "okay"; - }; - }; -}; - &i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - codec: sgtl5000@a { + sgtl5000: codec@a { #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; @@ -100,82 +47,47 @@ }; }; - -&sai1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1>; - assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, - <&clks IMX7D_SAI1_ROOT_CLK>; - assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; - assigned-clock-rates = <0>, <24576000>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; - assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; - status = "okay"; -}; - -&usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -&usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; - dr_mode = "host"; - status = "okay"; +&i2c4 { + polytouch: touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio2>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &iomuxc { - pinctrl_enet1: enet1grp { - fsl,pins = < - MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 - MX7D_PAD_SD2_WP__ENET1_MDC 0x3 - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - >; - }; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; - pinctrl_i2c1: i2c1grp { + pinctrl_hog: hoggrp { fsl,pins = < - MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f - MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 >; }; - pinctrl_sai1: sai1grp { + pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < - MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f - MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f - MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 - MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 >; }; - pinctrl_uart5: uart5grp { + pinctrl_touchscreen: touchscreengrp { fsl,pins = < - MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 - MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 >; }; - pinctrl_usbotg1_pwr: usbotg_pwr { - fsl,pins = < - MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 - >; - }; }; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index f27b3849d3ff..3fd595a71202 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -1,62 +1,23 @@ -/* - * Copyright 2017 NXP - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright 2017 NXP /dts-v1/; #include "imx7d.dtsi" / { - model = "Technexion Pico i.MX7D Board"; - compatible = "technexion,imx7d-pico", "fsl,imx7d"; - + /* Will be filled by the bootloader */ memory@80000000 { - reg = <0x80000000 0x80000000>; + device_type = "memory"; + reg = <0x80000000 0>; }; - reg_ap6212: regulator-ap6212 { + reg_wlreg_on: regulator-wlreg_on { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_ap6212>; - regulator-name = "AP6212"; + pinctrl-0 = <&pinctrl_reg_wlreg_on>; + regulator-name = "wlreg_on"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; @@ -80,6 +41,8 @@ }; reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_pwr>; compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; regulator-min-microvolt = <5000000>; @@ -115,6 +78,63 @@ assigned-clock-rates = <0>, <32768>; }; +&ecspi3 { + cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + status = "okay"; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; @@ -210,6 +230,91 @@ }; }; +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { /* Backlight */ + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + +&uart7 { /* Bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + tuning-step = <2>; + vmmc-supply = <®_3p3v>; + wakeup-source; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + &usdhc2 { /* Wifi SDIO */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>; @@ -217,7 +322,7 @@ non-removable; keep-power-in-suspend; wakeup-source; - vmmc-supply = <®_ap6212>; + vmmc-supply = <®_wlreg_on>; mmc-pwrseq = <&usdhc2_pwrseq>; status = "okay"; }; @@ -244,6 +349,63 @@ }; &iomuxc { + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 + MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 + MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f + MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x4000007f + MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ + >; + }; + + pinctrl_can1: can1frp { + fsl,pins = < + MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x59 + MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x59 + >; + }; + + pinctrl_can2: can2frp { + fsl,pins = < + MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x59 + MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x59 + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f @@ -251,12 +413,106 @@ >; }; - pinctrl_reg_ap6212: regap6212grp { + pinctrl_pwm1: pwm1 { + fsl,pins = < + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f + >; + }; + + pinctrl_pwm2: pwm2 { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f + >; + }; + + pinctrl_pwm3: pwm3 { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f + >; + }; + + pinctrl_reg_wlreg_on: regregongrp { fsl,pins = < MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59 >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79 + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79 + MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x79 + MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x79 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x79 + MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x79 + MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x79 + MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x79 + >; + }; + + pinctrl_usbotg1_pwr: usbotg_pwr { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x15 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX7D_PAD_SD2_CMD__SD2_CMD 0x59 diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts new file mode 100644 index 000000000000..7ce9d8c91985 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. + +/dts-v1/; + +#include "imx7d-sdb.dts" + +/ { + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + }; +}; + +&fec2 { + /delete-property/phy-supply; +}; + +&iomuxc { + imx7d-sdb { + pinctrl_tsc2046_pendown: tsc2046_pendown { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + >; + }; + + pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index f1bafdaa7e1a..202922ed3754 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -15,6 +15,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x80000000>; }; @@ -71,9 +72,11 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg2_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -114,6 +117,16 @@ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; }; + reg_fec2_3v3: regulator-fec2-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec2-3v3"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; @@ -210,6 +223,7 @@ assigned-clock-rates = <0>, <100000000>; phy-mode = "rgmii"; phy-handle = <ðphy1>; + phy-supply = <®_fec2_3v3>; fsl,magic-packet; status = "okay"; }; @@ -491,6 +505,12 @@ >; }; + pinctrl_enet2_reg: enet2reggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14 + >; + }; + pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 @@ -513,7 +533,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ >; }; @@ -735,4 +754,10 @@ MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30 >; }; + + pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 + >; + }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 826224bf7f4f..6b298e388f4b 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -24,6 +24,15 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + cpu0_opp_table: opp-table { compatible = "operating-points-v2"; opp-shared; @@ -72,6 +81,18 @@ }; }; }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + reg = <0x31001000 0x1000>, + <0x31002000 0x2000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; }; }; diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi index fe8344cee864..1fb1ec5d3d70 100644 --- a/arch/arm/boot/dts/imx7s-colibri.dtsi +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -45,6 +45,7 @@ / { memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index f7ba2c0a24ad..23431faecaf4 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -14,6 +14,7 @@ compatible = "warp,imx7s-warp", "fsl,imx7s"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index aa8df7d93b2e..e88f53a4c7f4 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -17,10 +17,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { gpio0 = &gpio1; @@ -162,10 +160,10 @@ timer { compatible = "arm,armv7-timer"; interrupt-parent = <&intc>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; soc { @@ -307,7 +305,7 @@ intc: interrupt-controller@31001000 { compatible = "arm,cortex-a7-gic"; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; #interrupt-cells = <3>; interrupt-controller; interrupt-parent = <&intc>; @@ -875,6 +873,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN1_ROOT_CLK>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 1 0x10 17>; status = "disabled"; }; @@ -885,6 +884,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN2_ROOT_CLK>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 2 0x10 18>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts new file mode 100644 index 000000000000..a09026a6d22e --- /dev/null +++ b/arch/arm/boot/dts/imx7ulp-evk.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +/dts-v1/; + +#include "imx7ulp.dtsi" + +/ { + model = "NXP i.MX7ULP EVK"; + compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp"; + + chosen { + stdout-path = &lpuart4; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + reg_vsd_3v3: regulator-vsd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc0_rst>; + gpio = <&gpio_ptd 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&lpuart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart4>; + status = "okay"; +}; + +&usdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc0>; + cd-gpios = <&gpio_ptc 10 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_vsd_3v3>; + status = "okay"; +}; + +&iomuxc1 { + pinctrl_lpuart4: lpuart4grp { + fsl,pins = < + IMX7ULP_PAD_PTC3__LPUART4_RX 0x3 + IMX7ULP_PAD_PTC2__LPUART4_TX 0x3 + >; + bias-pull-up; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43 + IMX7ULP_PAD_PTD2__SDHC0_CLK 0x40 + IMX7ULP_PAD_PTD7__SDHC0_D3 0x43 + IMX7ULP_PAD_PTD8__SDHC0_D2 0x43 + IMX7ULP_PAD_PTD9__SDHC0_D1 0x43 + IMX7ULP_PAD_PTD10__SDHC0_D0 0x43 + IMX7ULP_PAD_PTC10__PTC10 0x3 /* CD */ + >; + }; + + pinctrl_usdhc0_rst: usdhc0-gpio-rst-grp { + fsl,pins = < + IMX7ULP_PAD_PTD0__PTD0 0x3 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi new file mode 100644 index 000000000000..931b2754b099 --- /dev/null +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx7ulp-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx7ulp-pinfunc.h" + +/ { + interrupt-parent = <&intc>; + + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio_ptc; + gpio1 = &gpio_ptd; + gpio2 = &gpio_pte; + gpio3 = &gpio_ptf; + i2c0 = &lpi2c6; + i2c1 = &lpi2c7; + mmc0 = &usdhc0; + mmc1 = &usdhc1; + serial0 = &lpuart4; + serial1 = &lpuart5; + serial2 = &lpuart6; + serial3 = &lpuart7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + }; + + intc: interrupt-controller@40021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x40021000 0x1000>, + <0x40022000 0x1000>; + }; + + rosc: clock-rosc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "rosc"; + #clock-cells = <0>; + }; + + sosc: clock-sosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "sosc"; + #clock-cells = <0>; + }; + + sirc: clock-sirc { + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-output-names = "sirc"; + #clock-cells = <0>; + }; + + firc: clock-firc { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + clock-output-names = "firc"; + #clock-cells = <0>; + }; + + upll: clock-upll { + compatible = "fixed-clock"; + clock-frequency = <480000000>; + clock-output-names = "upll"; + #clock-cells = <0>; + }; + + mpll: clock-mpll { + compatible = "fixed-clock"; + clock-frequency = <480000000>; + clock-output-names = "mpll"; + #clock-cells = <0>; + }; + + ahbbridge0: bus@40000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x800000>; + ranges; + + lpuart4: serial@402d0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402d0000 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + assigned-clock-rates = <24000000>; + status = "disabled"; + }; + + lpuart5: serial@402e0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402e0000 0x1000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + tpm5: tpm@40260000 { + compatible = "fsl,imx7ulp-tpm"; + reg = <0x40260000 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&pcc2 IMX7ULP_CLK_LPTPM5>; + clock-names = "ipg", "per"; + }; + + usdhc0: mmc@40370000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40370000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC0>; + clock-names ="ipg", "ahb", "per"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc1: mmc@40380000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40380000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC1>; + clock-names ="ipg", "ahb", "per"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + scg1: clock-controller@403e0000 { + compatible = "fsl,imx7ulp-scg1"; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>, <&mpll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll", "mpll"; + #clock-cells = <1>; + }; + + pcc2: clock-controller@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_MIPI_PLL>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", "mpll", + "firc_bus_clk", "rosc", "spll_bus_clk"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + }; + + smc1: smc1@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; + }; + + pcc3: clock-controller@40b30000 { + compatible = "fsl,imx7ulp-pcc3"; + reg = <0x40b30000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_MIPI_PLL>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", "mpll", + "firc_bus_clk", "rosc", "spll_bus_clk"; + }; + }; + + ahbbridge1: bus@40800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40800000 0x800000>; + ranges; + + lpi2c6: i2c@40a40000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a40000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpi2c7: i2c@40a50000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a50000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart6: serial@40a60000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a60000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart7: serial@40a70000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a70000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + iomuxc1: pinctrl@40ac0000 { + compatible = "fsl,imx7ulp-iomuxc1"; + reg = <0x40ac0000 0x1000>; + }; + + gpio_ptc: gpio@40ae0000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40ae0000 0x1000 0x400f0000 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLC>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 0 32>; + }; + + gpio_ptd: gpio@40af0000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40af0000 0x1000 0x400f0040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLD>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 32 32>; + }; + + gpio_pte: gpio@40b00000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40b00000 0x1000 0x400f0080 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 64 32>; + }; + + gpio_ptf: gpio@40b10000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40b10000 0x1000 0x400f00c0 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLF>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 96 32>; + }; + }; +}; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index ca9154dd8052..e2b1ab9b56e5 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -116,6 +116,10 @@ status = "okay"; }; +&cmt0 { + status = "okay"; +}; + &hsusb { status = "okay"; pinctrl-0 = <&usb0_pins>; @@ -230,6 +234,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index d01f64b252b1..6a83f30029ea 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -203,9 +203,6 @@ }; &qspi { - bus-num = <0>; - fsl,spi-num-chipselects = <2>; - fsl,spi-flash-chipselects = <0>; fsl,qspi-has-second-chip; status = "okay"; @@ -214,6 +211,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; partitions@0 { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index bdd6e66a79ad..ed0941292172 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -324,6 +324,8 @@ trip = <&cpu_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -525,6 +527,102 @@ status = "disabled"; }; + pwm0: pwm@29d0000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x29d0000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm1: pwm@29e0000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x29e0000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm2: pwm@29f0000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x29f0000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm3: pwm@2a00000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a00000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm4: pwm@2a10000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a10000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm5: pwm@2a20000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a20000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm6: pwm@2a30000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a30000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm7: pwm@2a40000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a40000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + wdog0: watchdog@2ad0000 { compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; @@ -716,7 +814,7 @@ }; pcie@3400000 { - compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1021a-pcie"; reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -736,10 +834,11 @@ <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; pcie@3500000 { - compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + compatible = "fsl,ls1021a-pcie"; reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; @@ -759,6 +858,7 @@ <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; can0: can@2a70000 { @@ -812,5 +912,25 @@ #size-cells = <1>; ranges = <0x0 0x0 0x10010000 0x10000>; }; + + qdma: dma-controller@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8389000 0x0 0x1000>, /* Status regs */ + <0x0 0x838a000 0x0 0x2000>; /* Block regs */ + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", + "qdma-queue0", "qdma-queue1"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x1000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + }; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 0d9faf1a51ea..e4645f612712 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -59,14 +59,6 @@ cache-level = <2>; }; - gic: interrupt-controller@c4301000 { - compatible = "arm,cortex-a9-gic"; - reg = <0xc4301000 0x1000>, - <0xc4300100 0x0100>; - interrupt-controller; - #interrupt-cells = <3>; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -197,10 +189,29 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; - timer@9940 { + timer_abcde: timer@9940 { compatible = "amlogic,meson6-timer"; reg = <0x9940 0x18>; - interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; + }; + }; + + periph: bus@c4300000 { + compatible = "simple-bus"; + reg = <0xc4300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc4300000 0x10000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x1000 0x1000>, + <0x100 0x100>; + interrupt-controller; + #interrupt-cells = <3>; }; }; diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index 9444b0d9628f..fc48cff71ddf 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -56,6 +56,10 @@ serial0 = &uart_AO; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index 9b463211339f..ca978ab952cd 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -88,6 +88,11 @@ status = "disabled"; }; +&timer_abcde { + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "pclk"; +}; + &uart_AO { clocks = <&xtal>, <&clk81>, <&clk81>; clock-names = "xtal", "pclk", "baud"; diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts index 8bceb8d343f6..55fb090a40ef 100644 --- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -52,6 +52,10 @@ serial0 = &uart_AO; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 7162e0ca05b0..e5cd325d7ea8 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -64,6 +64,8 @@ reg = <0x200>; enable-method = "amlogic,meson8-smp"; resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu1: cpu@201 { @@ -73,6 +75,8 @@ reg = <0x201>; enable-method = "amlogic,meson8-smp"; resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu2: cpu@202 { @@ -82,6 +86,8 @@ reg = <0x202>; enable-method = "amlogic,meson8-smp"; resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu3: cpu@203 { @@ -91,6 +97,72 @@ reg = <0x203>; enable-method = "amlogic,meson8-smp"; resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-96000000 { + opp-hz = /bits/ 64 <96000000>; + opp-microvolt = <825000>; + }; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + opp-microvolt = <825000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <825000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <825000>; + }; + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <825000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <850000>; + }; + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <850000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <875000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <925000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <975000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1025000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1100000>; + }; + opp-1800000000 { + status = "disabled"; + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1125000>; + }; + opp-1992000000 { + status = "disabled"; + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1150000>; }; }; @@ -129,11 +201,6 @@ no-map; }; }; - - scu@c4300000 { - compatible = "arm,cortex-a9-scu"; - reg = <0xc4300000 0x100>; - }; }; /* end of / */ &aobus { @@ -163,6 +230,7 @@ mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -170,6 +238,7 @@ mux { groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; function = "i2c_mst_ao"; + bias-disable; }; }; @@ -177,6 +246,7 @@ mux { groups = "remote_input"; function = "remote"; + bias-disable; }; }; @@ -184,6 +254,7 @@ mux { groups = "pwm_f_ao"; function = "pwm_f_ao"; + bias-disable; }; }; }; @@ -238,6 +309,7 @@ groups = "sd_d0_a", "sd_d1_a", "sd_d2_a", "sd_d3_a", "sd_clk_a", "sd_cmd_a"; function = "sd_a"; + bias-disable; }; }; @@ -246,6 +318,7 @@ groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", "sd_d3_b", "sd_clk_b", "sd_cmd_b"; function = "sd_b"; + bias-disable; }; }; @@ -254,6 +327,7 @@ groups = "sd_d0_c", "sd_d1_c", "sd_d2_c", "sd_d3_c", "sd_clk_c", "sd_cmd_c"; function = "sd_c"; + bias-disable; }; }; @@ -261,6 +335,7 @@ mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; function = "nor"; + bias-disable; }; }; @@ -272,6 +347,7 @@ "eth_rxd1", "eth_rxd0", "eth_mdio", "eth_mdc"; function = "ethernet"; + bias-disable; }; }; @@ -279,6 +355,7 @@ mux { groups = "pwm_e"; function = "pwm_e"; + bias-disable; }; }; @@ -287,6 +364,7 @@ groups = "uart_tx_a1", "uart_rx_a1"; function = "uart_a"; + bias-disable; }; }; @@ -295,6 +373,7 @@ groups = "uart_cts_a1", "uart_rts_a1"; function = "uart_a"; + bias-disable; }; }; }; @@ -350,6 +429,33 @@ arm,shared-override; }; +&periph { + scu@0 { + compatible = "arm,cortex-a9-scu"; + reg = <0x0 0x100>; + }; + + timer@200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x200 0x20>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + + /* + * the arm_global_timer driver currently does not handle clock + * rate changes. Keep it disabled for now. + */ + status = "disabled"; + }; + + timer@600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + }; +}; + &pwm_ab { compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; }; @@ -375,6 +481,11 @@ clocks = <&clkc CLKID_CLK81>; }; +&timer_abcde { + clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk"; +}; + &uart_AO { compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index c7fdaeabbe7b..5c9b76af8d42 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -55,6 +55,10 @@ serial0 = &uart_AO; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index cd1ca9dda126..22d775460767 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -62,6 +62,8 @@ reg = <0x200>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu1: cpu@201 { @@ -71,6 +73,8 @@ reg = <0x201>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu2: cpu@202 { @@ -80,6 +84,8 @@ reg = <0x202>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu3: cpu@203 { @@ -89,6 +95,66 @@ reg = <0x203>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-96000000 { + opp-hz = /bits/ 64 <96000000>; + opp-microvolt = <860000>; + }; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + opp-microvolt = <860000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <860000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <860000>; + }; + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <860000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <860000>; + }; + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <860000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <900000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1140000>; + }; + opp-1320000000 { + opp-hz = /bits/ 64 <1320000000>; + opp-microvolt = <1140000>; + }; + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + opp-microvolt = <1140000>; + }; + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-microvolt = <1140000>; }; }; @@ -112,11 +178,6 @@ no-map; }; }; - - scu@c4300000 { - compatible = "arm,cortex-a5-scu"; - reg = <0xc4300000 0x100>; - }; }; /* end of / */ &aobus { @@ -146,6 +207,7 @@ mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -153,6 +215,7 @@ mux { groups = "remote_input"; function = "remote"; + bias-disable; }; }; }; @@ -220,6 +283,7 @@ "eth_txd2", "eth_txd3"; function = "ethernet"; + bias-disable; }; }; @@ -235,6 +299,7 @@ "eth_mdio_en", "eth_mdc"; function = "ethernet"; + bias-disable; }; }; @@ -242,6 +307,7 @@ mux { groups = "i2c_sda_a", "i2c_sck_a"; function = "i2c_a"; + bias-disable; }; }; @@ -250,6 +316,7 @@ groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", "sd_d3_b", "sd_clk_b", "sd_cmd_b"; function = "sd_b"; + bias-disable; }; }; @@ -257,6 +324,7 @@ mux { groups = "pwm_c1"; function = "pwm_c"; + bias-disable; }; }; @@ -265,6 +333,7 @@ groups = "uart_tx_b0", "uart_rx_b0"; function = "uart_b"; + bias-disable; }; }; @@ -273,6 +342,7 @@ groups = "uart_cts_b0", "uart_rts_b0"; function = "uart_b"; + bias-disable; }; }; }; @@ -340,6 +410,33 @@ arm,shared-override; }; +&periph { + scu@0 { + compatible = "arm,cortex-a5-scu"; + reg = <0x0 0x100>; + }; + + timer@200 { + compatible = "arm,cortex-a5-global-timer"; + reg = <0x200 0x20>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + + /* + * the arm_global_timer driver currently does not handle clock + * rate changes. Keep it disabled for now. + */ + status = "disabled"; + }; + + timer@600 { + compatible = "arm,cortex-a5-twd-timer"; + reg = <0x600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + }; +}; + &pwm_ab { compatible = "amlogic,meson8b-pwm"; }; @@ -361,6 +458,11 @@ clock-names = "core", "clkin"; }; +&timer_abcde { + clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk"; +}; + &uart_AO { compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi index 3e1f92273d7b..d1a28c2adac5 100644 --- a/arch/arm/boot/dts/meson8m2.dtsi +++ b/arch/arm/boot/dts/meson8m2.dtsi @@ -45,6 +45,7 @@ "eth_rxd1", "eth_rxd0", "eth_mdio", "eth_mdc"; function = "ethernet"; + bias-disable; }; }; }; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 766bbb8495b6..ee03e0846740 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -117,6 +117,60 @@ reg-names = "mux status", "mux mask"; mrvl,intc-nr-irqs = <2>; }; + + usb_otg_phy0: usb-otg-phy@d4207000 { + compatible = "marvell,mmp2-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_otg0: usb-otg@d4208000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xd4208000 0x200>; + interrupts = <44>; + clocks = <&soc_clocks MMP2_CLK_USB>; + clock-names = "USBCLK"; + phys = <&usb_otg_phy0>; + phy-names = "usb"; + status = "disabled"; + }; + + mmc1: mmc@d4280000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH0>; + clock-names = "io"; + interrupts = <39>; + status = "disabled"; + }; + + mmc2: mmc@d4280800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH1>; + clock-names = "io"; + interrupts = <52>; + status = "disabled"; + }; + + mmc3: mmc@d4281000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH2>; + clock-names = "io"; + interrupts = <53>; + status = "disabled"; + }; + + mmc4: mmc@d4281800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH3>; + clock-names = "io"; + interrupts = <54>; + status = "disabled"; + }; }; apb@d4000000 { /* APB */ @@ -130,6 +184,7 @@ compatible = "mrvl,mmp-timer"; reg = <0xd4014000 0x100>; interrupts = <13>; + clocks = <&soc_clocks MMP2_CLK_TIMER>; }; uart1: uart@d4030000 { @@ -168,7 +223,7 @@ status = "disabled"; }; - gpio@d4019000 { + gpio: gpio@d4019000 { compatible = "marvell,mmp2-gpio"; #address-cells = <1>; #size-cells = <1>; @@ -180,7 +235,7 @@ clocks = <&soc_clocks MMP2_CLK_GPIO>; resets = <&soc_clocks MMP2_CLK_GPIO>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; ranges; gcb0: gpio@d4019000 { @@ -220,12 +275,64 @@ status = "disabled"; }; - twsi2: i2c@d4025000 { + twsi2: i2c@d4031000 { compatible = "mrvl,mmp-twsi"; - reg = <0xd4025000 0x1000>; - interrupts = <58>; + reg = <0xd4031000 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <0>; clocks = <&soc_clocks MMP2_CLK_TWSI1>; resets = <&soc_clocks MMP2_CLK_TWSI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi3: i2c@d4032000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4032000 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <1>; + clocks = <&soc_clocks MMP2_CLK_TWSI2>; + resets = <&soc_clocks MMP2_CLK_TWSI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi4: i2c@d4033000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033000 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <2>; + clocks = <&soc_clocks MMP2_CLK_TWSI3>; + resets = <&soc_clocks MMP2_CLK_TWSI3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + twsi5: i2c@d4033800 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033800 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <3>; + clocks = <&soc_clocks MMP2_CLK_TWSI4>; + resets = <&soc_clocks MMP2_CLK_TWSI4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi6: i2c@d4034000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4034000 0x1000>; + interrupt-parent = <&intcmux17>; + interrupts = <4>; + clocks = <&soc_clocks MMP2_CLK_TWSI5>; + resets = <&soc_clocks MMP2_CLK_TWSI5>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -239,6 +346,38 @@ resets = <&soc_clocks MMP2_CLK_RTC>; status = "disabled"; }; + + ssp1: ssp@d4035000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4035000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP0>; + interrupts = <0>; + status = "disabled"; + }; + + ssp2: ssp@d4036000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4036000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP1>; + interrupts = <1>; + status = "disabled"; + }; + + ssp3: ssp@d4037000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4037000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP2>; + interrupts = <20>; + status = "disabled"; + }; + + ssp4: ssp@d4039000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4039000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP3>; + interrupts = <21>; + status = "disabled"; + }; }; soc_clocks: clocks{ diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index d5fe55392230..e53d32691308 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -382,7 +382,7 @@ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ /* mcbsp_clks is used as PENIRQ */ - /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */ + /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) mcbsp_clks.mcbsp_clks */ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ >; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index 6eb26b837446..5059ecac4478 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -196,12 +196,12 @@ clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x58000 0x4000>; + ranges = <0x0 0x58000 0x5000>; hsi: hsi@0 { compatible = "ti,omap4-hsi"; reg = <0x0 0x4000>, - <0x4a05c000 0x1000>; + <0x5000 0x1000>; reg-names = "sys", "gdd"; clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi new file mode 100644 index 000000000000..9c7e309d9c2c --- /dev/null +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -0,0 +1,2462 @@ +&l4_cfg { /* 0x4a000000 */ + compatible = "ti,omap5-l4-cfg", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */ + <0x00080000 0x4a080000 0x080000>, /* segment 1 */ + <0x00100000 0x4a100000 0x080000>, /* segment 2 */ + <0x00180000 0x4a180000 0x080000>, /* segment 3 */ + <0x00200000 0x4a200000 0x080000>, /* segment 4 */ + <0x00280000 0x4a280000 0x080000>, /* segment 5 */ + <0x00300000 0x4a300000 0x080000>; /* segment 6 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00002000 0x00002000 0x001000>, /* ap 3 */ + <0x00003000 0x00003000 0x001000>, /* ap 4 */ + <0x00004000 0x00004000 0x001000>, /* ap 5 */ + <0x00005000 0x00005000 0x001000>, /* ap 6 */ + <0x00056000 0x00056000 0x001000>, /* ap 7 */ + <0x00057000 0x00057000 0x001000>, /* ap 8 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 9 */ + <0x00058000 0x00058000 0x001000>, /* ap 10 */ + <0x00062000 0x00062000 0x001000>, /* ap 11 */ + <0x00063000 0x00063000 0x001000>, /* ap 12 */ + <0x00008000 0x00008000 0x002000>, /* ap 21 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 22 */ + <0x00066000 0x00066000 0x001000>, /* ap 23 */ + <0x00067000 0x00067000 0x001000>, /* ap 24 */ + <0x0005e000 0x0005e000 0x002000>, /* ap 69 */ + <0x00060000 0x00060000 0x001000>, /* ap 70 */ + <0x00064000 0x00064000 0x001000>, /* ap 71 */ + <0x00065000 0x00065000 0x001000>, /* ap 72 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 77 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 78 */ + <0x00070000 0x00070000 0x004000>, /* ap 79 */ + <0x00074000 0x00074000 0x001000>, /* ap 80 */ + <0x00075000 0x00075000 0x001000>, /* ap 81 */ + <0x00076000 0x00076000 0x001000>, /* ap 82 */ + <0x00020000 0x00020000 0x020000>, /* ap 109 */ + <0x00040000 0x00040000 0x001000>, /* ap 110 */ + <0x00059000 0x00059000 0x001000>; /* ap 111 */ + + target-module@2000 { /* 0x4a002000, ap 3 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x2000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + scm_core: scm@0 { + compatible = "ti,omap5-scm-core", "simple-bus"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + scm_padconf_core: scm@800 { + compatible = "ti,omap5-scm-padconf-core", + "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x800>; + + omap5_pmx_core: pinmux@40 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0x40 0x01b6>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap5_padconf_global: omap5_padconf_global@5a0 { + compatible = "syscon", + "simple-bus"; + reg = <0x5a0 0xec>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5a0 0xec>; + + pbias_regulator: pbias_regulator@60 { + compatible = "ti,pbias-omap5", "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap5_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap5 { + regulator-name = "pbias_mmc_omap5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; + }; + + target-module@4000 { /* 0x4a004000, ap 5 5c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + cm_core_aon: cm_core_aon@0 { + compatible = "ti,omap5-cm-core-aon", + "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + cm_core_aon_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_aon_clockdomains: clockdomains { + }; + }; + }; + + target-module@8000 { /* 0x4a008000, ap 21 4c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x8000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x2000>; + + cm_core: cm_core@0 { + compatible = "ti,omap5-cm-core", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm_core_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_core_clockdomains: clockdomains { + }; + }; + }; + + target-module@20000 { /* 0x4a020000, ap 109 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_otg_ss"; + reg = <0x20000 0x4>, + <0x20010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x20000>; + + usb3: omap_dwc3@0 { + compatible = "ti,dwc3"; + reg = <0x0 0x10000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges = <0 0 0x20000>; + dwc3: dwc3@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "peripheral"; + }; + }; + }; + + target-module@56000 { /* 0x4a056000, ap 7 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "dma_system"; + reg = <0x56000 0x4>, + <0x5602c 0x4>, + <0x56028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, dma_clkdm */ + clocks = <&dma_clkctrl OMAP5_DMA_SYSTEM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap4430-sdma"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + }; + + target-module@58000 { /* 0x4a058000, ap 10 06.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00058000 0x00001000>, + <0x00001000 0x00059000 0x00001000>, + <0x00002000 0x0005a000 0x00001000>, + <0x00003000 0x0005b000 0x00001000>; + }; + + target-module@5e000 { /* 0x4a05e000, ap 69 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x2000>; + }; + + target-module@62000 { /* 0x4a062000, ap 11 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_tll_hs"; + reg = <0x62000 0x4>, + <0x62010 0x4>, + <0x62014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_USB_TLL_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x62000 0x1000>; + + usbhstll: usbhstll@0 { + compatible = "ti,usbhs-tll"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@64000 { /* 0x4a064000, ap 71 1e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_host_hs"; + reg = <0x64000 0x4>, + <0x64010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_USB_HOST_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x1000>; + + usbhshost: usbhshost@0 { + compatible = "ti,usbhs-host"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + clocks = <&l3init_60m_fclk>, + <&xclk60mhsp1_ck>, + <&xclk60mhsp2_ck>; + clock-names = "refclk_60m_int", + "refclk_60m_ext_p1", + "refclk_60m_ext_p2"; + + usbhsohci: ohci@800 { + compatible = "ti,ohci-omap3"; + reg = <0x800 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + remote-wakeup-connected; + }; + + usbhsehci: ehci@c00 { + compatible = "ti,ehci-omap"; + reg = <0xc00 0x400>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@66000 { /* 0x4a066000, ap 23 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmu_dsp"; + reg = <0x66000 0x4>, + <0x66010 0x4>, + <0x66014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */ + clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + /* mmu_dsp cannot be moved before reset driver */ + status = "disabled"; + }; + + target-module@70000 { /* 0x4a070000, ap 79 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x4000>; + }; + + target-module@75000 { /* 0x4a075000, ap 81 32.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x75000 0x1000>; + }; + }; + + segment@80000 { /* 0x4a080000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ + <0x0005a000 0x000da000 0x001000>, /* ap 14 */ + <0x0005b000 0x000db000 0x001000>, /* ap 15 */ + <0x0005c000 0x000dc000 0x001000>, /* ap 16 */ + <0x0005d000 0x000dd000 0x001000>, /* ap 17 */ + <0x0005e000 0x000de000 0x001000>, /* ap 18 */ + <0x00060000 0x000e0000 0x001000>, /* ap 19 */ + <0x00061000 0x000e1000 0x001000>, /* ap 20 */ + <0x00074000 0x000f4000 0x001000>, /* ap 25 */ + <0x00075000 0x000f5000 0x001000>, /* ap 26 */ + <0x00076000 0x000f6000 0x001000>, /* ap 27 */ + <0x00077000 0x000f7000 0x001000>, /* ap 28 */ + <0x00036000 0x000b6000 0x001000>, /* ap 65 */ + <0x00037000 0x000b7000 0x001000>, /* ap 66 */ + <0x0004d000 0x000cd000 0x001000>, /* ap 67 */ + <0x0004e000 0x000ce000 0x001000>, /* ap 68 */ + <0x00000000 0x00080000 0x004000>, /* ap 83 */ + <0x00004000 0x00084000 0x001000>, /* ap 84 */ + <0x00005000 0x00085000 0x001000>, /* ap 85 */ + <0x00006000 0x00086000 0x001000>, /* ap 86 */ + <0x00007000 0x00087000 0x001000>, /* ap 87 */ + <0x00008000 0x00088000 0x001000>, /* ap 88 */ + <0x00010000 0x00090000 0x004000>, /* ap 89 */ + <0x00014000 0x00094000 0x001000>, /* ap 90 */ + <0x00015000 0x00095000 0x001000>, /* ap 91 */ + <0x00016000 0x00096000 0x001000>, /* ap 92 */ + <0x00017000 0x00097000 0x001000>, /* ap 93 */ + <0x00018000 0x00098000 0x001000>, /* ap 94 */ + <0x00020000 0x000a0000 0x004000>, /* ap 95 */ + <0x00024000 0x000a4000 0x001000>, /* ap 96 */ + <0x00025000 0x000a5000 0x001000>, /* ap 97 */ + <0x00026000 0x000a6000 0x001000>, /* ap 98 */ + <0x00027000 0x000a7000 0x001000>, /* ap 99 */ + <0x00028000 0x000a8000 0x001000>; /* ap 100 */ + + target-module@0 { /* 0x4a080000, ap 83 28.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp1"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x14 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_OCP2SCP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00004000>, + <0x00004000 0x00004000 0x00001000>, + <0x00005000 0x00005000 0x00001000>, + <0x00006000 0x00006000 0x00001000>, + <0x00007000 0x00007000 0x00001000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x20>; + }; + + usb2_phy: usb2phy@4000 { + compatible = "ti,omap-usb2"; + reg = <0x4000 0x7c>; + syscon-phy-power = <&scm_conf 0x300>; + clocks = <&usb_phy_cm_clk32k>, + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; + + usb3_phy: usb3phy@4400 { + compatible = "ti,omap-usb3"; + reg = <0x4400 0x80>, + <0x4800 0x64>, + <0x4c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x370>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; + clock-names = "wkupclk", + "sysclk", + "refclk"; + #phy-cells = <0>; + }; + }; + + target-module@10000 { /* 0x4a090000, ap 89 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp3"; + reg = <0x10000 0x4>, + <0x10010 0x4>, + <0x10014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_OCP2SCP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x00004000>, + <0x00004000 0x00014000 0x00001000>, + <0x00005000 0x00015000 0x00001000>, + <0x00006000 0x00016000 0x00001000>, + <0x00007000 0x00017000 0x00001000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x20>; + }; + + sata_phy: phy@6000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x6000 0x80>, /* phy_rx */ + <0x6400 0x64>, /* phy_tx */ + <0x6800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + syscon-phy-power = <&scm_conf 0x374>; + clocks = <&sys_clkin>, + <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; + clock-names = "sysclk", "refclk"; + #phy-cells = <0>; + }; + }; + + target-module@20000 { /* 0x4a0a0000, ap 95 50.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00020000 0x00004000>, + <0x00004000 0x00024000 0x00001000>, + <0x00005000 0x00025000 0x00001000>, + <0x00006000 0x00026000 0x00001000>, + <0x00007000 0x00027000 0x00001000>; + }; + + target-module@36000 { /* 0x4a0b6000, ap 65 6c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@4d000 { /* 0x4a0cd000, ap 67 64.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000 0x1000>; + }; + + target-module@59000 { /* 0x4a0d9000, ap 13 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + }; + + target-module@5b000 { /* 0x4a0db000, ap 15 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + }; + + target-module@5d000 { /* 0x4a0dd000, ap 17 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + }; + + target-module@60000 { /* 0x4a0e0000, ap 19 54.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + }; + + target-module@74000 { /* 0x4a0f4000, ap 25 04.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox"; + reg = <0x74000 0x4>, + <0x74010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl OMAP5_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x74000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + }; + + target-module@76000 { /* 0x4a0f6000, ap 27 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0x76000 0x4>, + <0x76010 0x4>, + <0x76014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */ + clocks = <&l4cfg_clkctrl OMAP5_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x4a100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */ + <0x00003000 0x00103000 0x001000>, /* ap 60 */ + <0x00008000 0x00108000 0x001000>, /* ap 61 */ + <0x00009000 0x00109000 0x001000>, /* ap 62 */ + <0x0000a000 0x0010a000 0x001000>, /* ap 63 */ + <0x0000b000 0x0010b000 0x001000>, /* ap 64 */ + <0x00040000 0x00140000 0x010000>, /* ap 101 */ + <0x00050000 0x00150000 0x001000>; /* ap 102 */ + + target-module@2000 { /* 0x4a102000, ap 59 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@8000 { /* 0x4a108000, ap 61 26.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a10a000, ap 63 22.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@40000 { /* 0x4a140000, ap 101 16.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x10000>; + }; + }; + + segment@180000 { /* 0x4a180000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@200000 { /* 0x4a200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */ + <0x0001f000 0x0021f000 0x001000>, /* ap 30 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 31 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 32 */ + <0x00006000 0x00206000 0x001000>, /* ap 33 */ + <0x00007000 0x00207000 0x001000>, /* ap 34 */ + <0x00004000 0x00204000 0x001000>, /* ap 35 */ + <0x00005000 0x00205000 0x001000>, /* ap 36 */ + <0x00012000 0x00212000 0x001000>, /* ap 37 */ + <0x00013000 0x00213000 0x001000>, /* ap 38 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 39 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 40 */ + <0x00010000 0x00210000 0x001000>, /* ap 41 */ + <0x00011000 0x00211000 0x001000>, /* ap 42 */ + <0x00016000 0x00216000 0x001000>, /* ap 43 */ + <0x00017000 0x00217000 0x001000>, /* ap 44 */ + <0x00014000 0x00214000 0x001000>, /* ap 45 */ + <0x00015000 0x00215000 0x001000>, /* ap 46 */ + <0x00018000 0x00218000 0x001000>, /* ap 47 */ + <0x00019000 0x00219000 0x001000>, /* ap 48 */ + <0x00020000 0x00220000 0x001000>, /* ap 49 */ + <0x00021000 0x00221000 0x001000>, /* ap 50 */ + <0x00026000 0x00226000 0x001000>, /* ap 51 */ + <0x00027000 0x00227000 0x001000>, /* ap 52 */ + <0x00028000 0x00228000 0x001000>, /* ap 53 */ + <0x00029000 0x00229000 0x001000>, /* ap 54 */ + <0x0002a000 0x0022a000 0x001000>, /* ap 55 */ + <0x0002b000 0x0022b000 0x001000>, /* ap 56 */ + <0x0001c000 0x0021c000 0x001000>, /* ap 57 */ + <0x0001d000 0x0021d000 0x001000>, /* ap 58 */ + <0x0001a000 0x0021a000 0x001000>, /* ap 73 */ + <0x0001b000 0x0021b000 0x001000>, /* ap 74 */ + <0x00024000 0x00224000 0x001000>, /* ap 75 */ + <0x00025000 0x00225000 0x001000>, /* ap 76 */ + <0x00002000 0x00202000 0x001000>, /* ap 103 */ + <0x00003000 0x00203000 0x001000>, /* ap 104 */ + <0x00008000 0x00208000 0x001000>, /* ap 105 */ + <0x00009000 0x00209000 0x001000>, /* ap 106 */ + <0x00022000 0x00222000 0x001000>, /* ap 107 */ + <0x00023000 0x00223000 0x001000>; /* ap 108 */ + + target-module@2000 { /* 0x4a202000, ap 103 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@4000 { /* 0x4a204000, ap 35 46.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a206000, ap 33 4e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x1000>; + }; + + target-module@8000 { /* 0x4a208000, ap 105 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a20a000, ap 31 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@c000 { /* 0x4a20c000, ap 39 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@10000 { /* 0x4a210000, ap 41 56.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@12000 { /* 0x4a212000, ap 37 52.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000 0x1000>; + }; + + target-module@14000 { /* 0x4a214000, ap 45 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@16000 { /* 0x4a216000, ap 43 42.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@18000 { /* 0x4a218000, ap 47 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x1000>; + }; + + target-module@1a000 { /* 0x4a21a000, ap 73 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1a000 0x1000>; + }; + + target-module@1c000 { /* 0x4a21c000, ap 57 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4a21e000, ap 29 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x4a220000, ap 49 4a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@22000 { /* 0x4a222000, ap 107 3a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>; + }; + + target-module@24000 { /* 0x4a224000, ap 75 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + }; + + target-module@26000 { /* 0x4a226000, ap 51 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@28000 { /* 0x4a228000, ap 53 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + }; + + target-module@2a000 { /* 0x4a22a000, ap 55 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + }; + }; + + segment@280000 { /* 0x4a280000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@300000 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,omap5-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ + <0x00200000 0x48200000 0x200000>; /* segment 1 */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00020000 0x00020000 0x001000>, /* ap 3 */ + <0x00021000 0x00021000 0x001000>, /* ap 4 */ + <0x00032000 0x00032000 0x001000>, /* ap 5 */ + <0x00033000 0x00033000 0x001000>, /* ap 6 */ + <0x00034000 0x00034000 0x001000>, /* ap 7 */ + <0x00035000 0x00035000 0x001000>, /* ap 8 */ + <0x00036000 0x00036000 0x001000>, /* ap 9 */ + <0x00037000 0x00037000 0x001000>, /* ap 10 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ + <0x00055000 0x00055000 0x001000>, /* ap 13 */ + <0x00056000 0x00056000 0x001000>, /* ap 14 */ + <0x00057000 0x00057000 0x001000>, /* ap 15 */ + <0x00058000 0x00058000 0x001000>, /* ap 16 */ + <0x00059000 0x00059000 0x001000>, /* ap 17 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 18 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 19 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 20 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 21 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 22 */ + <0x00060000 0x00060000 0x001000>, /* ap 23 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 24 */ + <0x0006b000 0x0006b000 0x001000>, /* ap 25 */ + <0x0006c000 0x0006c000 0x001000>, /* ap 26 */ + <0x0006d000 0x0006d000 0x001000>, /* ap 27 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 28 */ + <0x0006f000 0x0006f000 0x001000>, /* ap 29 */ + <0x00070000 0x00070000 0x001000>, /* ap 30 */ + <0x00071000 0x00071000 0x001000>, /* ap 31 */ + <0x00072000 0x00072000 0x001000>, /* ap 32 */ + <0x00073000 0x00073000 0x001000>, /* ap 33 */ + <0x00061000 0x00061000 0x001000>, /* ap 34 */ + <0x00053000 0x00053000 0x001000>, /* ap 35 */ + <0x00054000 0x00054000 0x001000>, /* ap 36 */ + <0x000b2000 0x000b2000 0x001000>, /* ap 37 */ + <0x000b3000 0x000b3000 0x001000>, /* ap 38 */ + <0x00078000 0x00078000 0x001000>, /* ap 39 */ + <0x00079000 0x00079000 0x001000>, /* ap 40 */ + <0x00086000 0x00086000 0x001000>, /* ap 41 */ + <0x00087000 0x00087000 0x001000>, /* ap 42 */ + <0x00088000 0x00088000 0x001000>, /* ap 43 */ + <0x00089000 0x00089000 0x001000>, /* ap 44 */ + <0x00051000 0x00051000 0x001000>, /* ap 45 */ + <0x00052000 0x00052000 0x001000>, /* ap 46 */ + <0x00098000 0x00098000 0x001000>, /* ap 47 */ + <0x00099000 0x00099000 0x001000>, /* ap 48 */ + <0x0009a000 0x0009a000 0x001000>, /* ap 49 */ + <0x0009b000 0x0009b000 0x001000>, /* ap 50 */ + <0x0009c000 0x0009c000 0x001000>, /* ap 51 */ + <0x0009d000 0x0009d000 0x001000>, /* ap 52 */ + <0x00068000 0x00068000 0x001000>, /* ap 53 */ + <0x00069000 0x00069000 0x001000>, /* ap 54 */ + <0x00090000 0x00090000 0x002000>, /* ap 55 */ + <0x00092000 0x00092000 0x001000>, /* ap 56 */ + <0x000a4000 0x000a4000 0x001000>, /* ap 57 */ + <0x000a6000 0x000a6000 0x001000>, /* ap 58 */ + <0x000a8000 0x000a8000 0x004000>, /* ap 59 */ + <0x000ac000 0x000ac000 0x001000>, /* ap 60 */ + <0x000ad000 0x000ad000 0x001000>, /* ap 61 */ + <0x000ae000 0x000ae000 0x001000>, /* ap 62 */ + <0x00066000 0x00066000 0x001000>, /* ap 63 */ + <0x00067000 0x00067000 0x001000>, /* ap 64 */ + <0x000b4000 0x000b4000 0x001000>, /* ap 65 */ + <0x000b5000 0x000b5000 0x001000>, /* ap 66 */ + <0x000b8000 0x000b8000 0x001000>, /* ap 67 */ + <0x000b9000 0x000b9000 0x001000>, /* ap 68 */ + <0x000ba000 0x000ba000 0x001000>, /* ap 69 */ + <0x000bb000 0x000bb000 0x001000>, /* ap 70 */ + <0x000d1000 0x000d1000 0x001000>, /* ap 71 */ + <0x000d2000 0x000d2000 0x001000>, /* ap 72 */ + <0x000d5000 0x000d5000 0x001000>, /* ap 73 */ + <0x000d6000 0x000d6000 0x001000>, /* ap 74 */ + <0x000a2000 0x000a2000 0x001000>, /* ap 75 */ + <0x000a3000 0x000a3000 0x001000>, /* ap 76 */ + <0x00001400 0x00001400 0x000400>, /* ap 77 */ + <0x00001800 0x00001800 0x000400>, /* ap 78 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 79 */ + <0x000a5000 0x000a5000 0x001000>, /* ap 80 */ + <0x0007a000 0x0007a000 0x001000>, /* ap 81 */ + <0x0007b000 0x0007b000 0x001000>, /* ap 82 */ + <0x0007c000 0x0007c000 0x001000>, /* ap 83 */ + <0x0007d000 0x0007d000 0x001000>; /* ap 84 */ + + target-module@20000 { /* 0x48020000, ap 3 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + ti,no-reset-on-init; + ti,no-idle-on-init; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart3: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@32000 { /* 0x48032000, ap 5 3e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@34000 { /* 0x48034000, ap 7 46.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x34000 0x4>, + <0x34010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + + timer3: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@36000 { /* 0x48036000, ap 9 4e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x36000 0x4>, + <0x36010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + + timer4: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@3e000 { /* 0x4803e000, ap 11 56.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer9"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + timer9: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@51000 { /* 0x48051000, ap 45 2e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio7"; + reg = <0x51000 0x4>, + <0x51010 0x4>, + <0x51114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x51000 0x1000>; + + gpio7: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@53000 { /* 0x48053000, ap 35 36.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio8"; + reg = <0x53000 0x4>, + <0x53010 0x4>, + <0x53114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53000 0x1000>; + + gpio8: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@55000 { /* 0x48055000, ap 13 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x55000 0x4>, + <0x55010 0x4>, + <0x55114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@57000 { /* 0x48057000, ap 15 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0x57000 0x4>, + <0x57010 0x4>, + <0x57114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@59000 { /* 0x48059000, ap 17 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0x59000 0x4>, + <0x59010 0x4>, + <0x59114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio5"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>, + <0x5b114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5d000 { /* 0x4805d000, ap 21 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio6"; + reg = <0x5d000 0x4>, + <0x5d010 0x4>, + <0x5d114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 0>, + <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + gpio6: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@60000 { /* 0x48060000, ap 23 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x60000 0x8>, + <0x60010 0x8>, + <0x60090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + i2c3: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@66000 { /* 0x48066000, ap 63 4c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart5"; + reg = <0x66050 0x4>, + <0x66054 0x4>, + <0x66058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + uart5: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@68000 { /* 0x48068000, ap 53 54.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart6"; + reg = <0x68050 0x4>, + <0x68054 0x4>, + <0x68058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x68000 0x1000>; + + uart6: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6a000 { /* 0x4806a000, ap 24 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x6a050 0x4>, + <0x6a054 0x4>, + <0x6a058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6a000 0x1000>; + + uart1: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6c000 { /* 0x4806c000, ap 26 22.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x6c050 0x4>, + <0x6c054 0x4>, + <0x6c058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x1000>; + + uart2: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6e000 { /* 0x4806e000, ap 28 44.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0x6e050 0x4>, + <0x6e054 0x4>, + <0x6e058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6e000 0x1000>; + + uart4: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@70000 { /* 0x48070000, ap 30 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0x70000 0x8>, + <0x70010 0x8>, + <0x70090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@72000 { /* 0x48072000, ap 32 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x72000 0x8>, + <0x72010 0x8>, + <0x72090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x72000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@78000 { /* 0x48078000, ap 39 12.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x1000>; + }; + + target-module@7a000 { /* 0x4807a000, ap 81 2c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c4"; + reg = <0x7a000 0x8>, + <0x7a010 0x8>, + <0x7a090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7a000 0x1000>; + + i2c4: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@7c000 { /* 0x4807c000, ap 83 34.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c5"; + reg = <0x7c000 0x8>, + <0x7c010 0x8>, + <0x7c090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_I2C5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x7c000 0x1000>; + + i2c5: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@86000 { /* 0x48086000, ap 41 5e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer10"; + reg = <0x86000 0x4>, + <0x86010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + timer10: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@88000 { /* 0x48088000, ap 43 66.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer11"; + reg = <0x88000 0x4>, + <0x88010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x88000 0x1000>; + + timer11: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@90000 { /* 0x48090000, ap 55 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x2000>; + }; + + target-module@98000 { /* 0x48098000, ap 47 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi1"; + reg = <0x98000 0x4>, + <0x98010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x98000 0x1000>; + + mcspi1: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + }; + + target-module@9a000 { /* 0x4809a000, ap 49 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi2"; + reg = <0x9a000 0x4>, + <0x9a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9a000 0x1000>; + + mcspi2: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + }; + + target-module@9c000 { /* 0x4809c000, ap 51 3a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x9c000 0x4>, + <0x9c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; + }; + }; + + target-module@a2000 { /* 0x480a2000, ap 75 02.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x480a4000, ap 57 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x000a4000 0x00001000>, + <0x00001000 0x000a5000 0x00001000>; + }; + + target-module@a8000 { /* 0x480a8000, ap 59 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x4000>; + }; + + target-module@ad000 { /* 0x480ad000, ap 61 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc3"; + reg = <0xad000 0x4>, + <0xad010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xad000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b2000 { /* 0x480b2000, ap 37 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb2000 0x1000>; + }; + + target-module@b4000 { /* 0x480b4000, ap 65 42.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xb4000 0x4>, + <0xb4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl OMAP5_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb4000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b8000 { /* 0x480b8000, ap 67 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi3"; + reg = <0xb8000 0x4>, + <0xb8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000 0x1000>; + + mcspi3: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@ba000 { /* 0x480ba000, ap 69 18.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi4"; + reg = <0xba000 0x4>, + <0xba010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MCSPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xba000 0x1000>; + + mcspi4: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@d1000 { /* 0x480d1000, ap 71 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc4"; + reg = <0xd1000 0x4>, + <0xd1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MMC4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd1000 0x1000>; + + mmc4: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + }; + }; + + target-module@d5000 { /* 0x480d5000, ap 73 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc5"; + reg = <0xd5000 0x4>, + <0xd5010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */ + clocks = <&l4per_clkctrl OMAP5_MMC5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd5000 0x1000>; + + mmc5: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&l4_wkup { /* 0x4ae00000 */ + compatible = "ti,omap5-l4-wkup", "simple-bus"; + reg = <0x4ae00000 0x800>, + <0x4ae00800 0x800>, + <0x4ae01000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4ae00000 0x010000>, /* segment 0 */ + <0x00010000 0x4ae10000 0x010000>, /* segment 1 */ + <0x00020000 0x4ae20000 0x010000>; /* segment 2 */ + + segment@0 { /* 0x4ae00000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00006000 0x00006000 0x002000>, /* ap 3 */ + <0x00008000 0x00008000 0x001000>, /* ap 4 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 15 */ + <0x0000b000 0x0000b000 0x001000>, /* ap 16 */ + <0x00004000 0x00004000 0x001000>, /* ap 17 */ + <0x00005000 0x00005000 0x001000>, /* ap 18 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0000d000 0x001000>; /* ap 20 */ + + target-module@4000 { /* 0x4ae04000, ap 17 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x4000 0x4>, + <0x4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x40>; + }; + }; + + target-module@6000 { /* 0x4ae06000, ap 3 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x2000>; + + prm: prm@0 { + compatible = "ti,omap5-prm", "simple-bus"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + target-module@a000 { /* 0x4ae0a000, ap 15 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xa000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + scrm: scrm@0 { + compatible = "ti,omap5-scrm"; + reg = <0x0 0x1000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + }; + + target-module@c000 { /* 0x4ae0c000, ap 19 28.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xc000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + omap5_pmx_wkup: pinmux@840 { + compatible = "ti,omap5-padconf", + "pinctrl-single"; + reg = <0x840 0x003c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@da0 { + compatible = "ti,omap5-scm-wkup-pad-conf", + "simple-bus"; + reg = <0xda0 0x60>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x60>; + + scm_wkup_pad_conf: scm_conf@0 { + compatible = "syscon", "simple-bus"; + reg = <0x0 0x60>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x60>; + + scm_wkup_pad_conf_clocks: clocks@0 { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; + }; + + segment@10000 { /* 0x4ae10000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ + <0x00001000 0x00011000 0x001000>, /* ap 6 */ + <0x00004000 0x00014000 0x001000>, /* ap 7 */ + <0x00005000 0x00015000 0x001000>, /* ap 8 */ + <0x00008000 0x00018000 0x001000>, /* ap 9 */ + <0x00009000 0x00019000 0x001000>, /* ap 10 */ + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ + <0x0000d000 0x0001d000 0x001000>; /* ap 12 */ + + target-module@0 { /* 0x4ae10000, ap 5 10.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 0>, + <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@4000 { /* 0x4ae14000, ap 7 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap5-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@8000 { /* 0x4ae18000, ap 9 18.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x8000 0x4>, + <0x8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>; + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + }; + + target-module@c000 { /* 0x4ae1c000, ap 11 1c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "kbd"; + reg = <0xc000 0x4>, + <0xc010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */ + clocks = <&wkupaon_clkctrl OMAP5_KBD_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + keypad: keypad@0 { + compatible = "ti,omap4-keypad"; + reg = <0x0 0x400>; + }; + }; + }; + + segment@20000 { /* 0x4ae20000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ + <0x00000000 0x00020000 0x001000>, /* ap 21 */ + <0x00001000 0x00021000 0x001000>, /* ap 22 */ + <0x00002000 0x00022000 0x001000>, /* ap 23 */ + <0x00003000 0x00023000 0x001000>, /* ap 24 */ + <0x00007000 0x00027000 0x000400>, /* ap 25 */ + <0x00008000 0x00028000 0x000800>, /* ap 26 */ + <0x00009000 0x00029000 0x000100>, /* ap 27 */ + <0x00008800 0x00028800 0x000200>, /* ap 28 */ + <0x00008a00 0x00028a00 0x000100>; /* ap 29 */ + + target-module@0 { /* 0x4ae20000, ap 21 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + target-module@2000 { /* 0x4ae22000, ap 23 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@6000 { /* 0x4ae26000, ap 13 24.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00006000 0x00001000>, + <0x00001000 0x00007000 0x00000400>, + <0x00002000 0x00008000 0x00000800>, + <0x00002800 0x00008800 0x00000200>, + <0x00002a00 0x00008a00 0x00000100>, + <0x00003000 0x00009000 0x00000100>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 574ac11c0489..2fefaafdf901 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -7,6 +7,7 @@ * Based on "omap4.dtsi" */ +#include <dt-bindings/bus/ti-sysc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/omap.h> @@ -151,178 +152,13 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_cfg: l4@4a000000 { - compatible = "ti,omap5-l4-cfg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a000000 0x22a000>; - - scm_core: scm@2000 { - compatible = "ti,omap5-scm-core", "simple-bus"; - reg = <0x2000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2000 0x800>; - - scm_conf: scm_conf@0 { - compatible = "syscon"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - scm_padconf_core: scm@2800 { - compatible = "ti,omap5-scm-padconf-core", - "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2800 0x800>; - - omap5_pmx_core: pinmux@40 { - compatible = "ti,omap5-padconf", - "pinctrl-single"; - reg = <0x40 0x01b6>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap5_padconf_global: omap5_padconf_global@5a0 { - compatible = "syscon", - "simple-bus"; - reg = <0x5a0 0xec>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x5a0 0xec>; - - pbias_regulator: pbias_regulator@60 { - compatible = "ti,pbias-omap5", "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap5_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap5 { - regulator-name = "pbias_mmc_omap5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; - }; - - cm_core_aon: cm_core_aon@4000 { - compatible = "ti,omap5-cm-core-aon", - "simple-bus"; - reg = <0x4000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4000 0x2000>; - - cm_core_aon_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_aon_clockdomains: clockdomains { - }; - }; - - cm_core: cm_core@8000 { - compatible = "ti,omap5-cm-core", "simple-bus"; - reg = <0x8000 0x3000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x8000 0x3000>; - - cm_core_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm_core_clockdomains: clockdomains { - }; - }; + l4_wkup: interconnect@4ae00000 { }; - l4_wkup: l4@4ae00000 { - compatible = "ti,omap5-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4ae00000 0x2b000>; - - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x40>; - ti,hwmods = "counter_32k"; - }; - - prm: prm@6000 { - compatible = "ti,omap5-prm", "simple-bus"; - reg = <0x6000 0x3000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x6000 0x3000>; - - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@a000 { - compatible = "ti,omap5-scrm"; - reg = <0xa000 0x2000>; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - - omap5_pmx_wkup: pinmux@c840 { - compatible = "ti,omap5-padconf", - "pinctrl-single"; - reg = <0xc840 0x003c>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@cda0 { - compatible = "ti,omap5-scm-wkup-pad-conf", - "simple-bus"; - reg = <0xcda0 0x60>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xcda0 0x60>; - - scm_wkup_pad_conf: scm_conf@0 { - compatible = "syscon", "simple-bus"; - reg = <0x0 0x60>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x60>; + l4_cfg: interconnect@4a000000 { + }; - scm_wkup_pad_conf_clocks: clocks@0 { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; + l4_per: interconnect@48000000 { }; ocmcram: ocmcram@40300000 { @@ -330,108 +166,6 @@ reg = <0x40300000 0x20000>; /* 128k */ }; - sdma: dma-controller@4a056000 { - compatible = "ti,omap4430-sdma"; - reg = <0x4a056000 0x1000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - ti,hwmods = "dma_system"; - }; - - gpio1: gpio@4ae10000 { - compatible = "ti,omap4-gpio"; - reg = <0x4ae10000 0x200>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio1"; - ti,gpio-always-on; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@48055000 { - compatible = "ti,omap4-gpio"; - reg = <0x48055000 0x200>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@48057000 { - compatible = "ti,omap4-gpio"; - reg = <0x48057000 0x200>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@48059000 { - compatible = "ti,omap4-gpio"; - reg = <0x48059000 0x200>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@4805b000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805b000 0x200>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio5"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@4805d000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805d000 0x200>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio6"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@48051000 { - compatible = "ti,omap4-gpio"; - reg = <0x48051000 0x200>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio7"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio8: gpio@48053000 { - compatible = "ti,omap4-gpio"; - reg = <0x48053000 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio8"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - gpmc: gpmc@50000000 { compatible = "ti,omap4430-gpmc"; reg = <0x50000000 0x1000>; @@ -451,217 +185,6 @@ #gpio-cells = <2>; }; - i2c1: i2c@48070000 { - compatible = "ti,omap4-i2c"; - reg = <0x48070000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - }; - - i2c2: i2c@48072000 { - compatible = "ti,omap4-i2c"; - reg = <0x48072000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - }; - - i2c3: i2c@48060000 { - compatible = "ti,omap4-i2c"; - reg = <0x48060000 0x100>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - }; - - i2c4: i2c@4807a000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807a000 0x100>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c4"; - }; - - i2c5: i2c@4807c000 { - compatible = "ti,omap4-i2c"; - reg = <0x4807c000 0x100>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c5"; - }; - - hwspinlock: spinlock@4a0f6000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x4a0f6000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - mcspi1: spi@48098000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48098000 0x200>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - }; - - mcspi2: spi@4809a000 { - compatible = "ti,omap4-mcspi"; - reg = <0x4809a000 0x200>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi2"; - ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - }; - - mcspi3: spi@480b8000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480b8000 0x200>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi3"; - ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; - dma-names = "tx0", "rx0"; - }; - - mcspi4: spi@480ba000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480ba000 0x200>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi4"; - ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; - dma-names = "tx0", "rx0"; - }; - - uart1: serial@4806a000 { - compatible = "ti,omap4-uart"; - reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - }; - - uart2: serial@4806c000 { - compatible = "ti,omap4-uart"; - reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - }; - - uart3: serial@48020000 { - compatible = "ti,omap4-uart"; - reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - }; - - uart4: serial@4806e000 { - compatible = "ti,omap4-uart"; - reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - - uart5: serial@48066000 { - compatible = "ti,omap4-uart"; - reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart5"; - clock-frequency = <48000000>; - }; - - uart6: serial@48068000 { - compatible = "ti,omap4-uart"; - reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart6"; - clock-frequency = <48000000>; - }; - - mmc1: mmc@4809c000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x4809c000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; - dma-names = "tx", "rx"; - pbias-supply = <&pbias_mmc_reg>; - }; - - mmc2: mmc@480b4000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480b4000 0x400>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; - dma-names = "tx", "rx"; - }; - - mmc3: mmc@480ad000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480ad000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc3"; - ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; - dma-names = "tx", "rx"; - }; - - mmc4: mmc@480d1000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d1000 0x400>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc4"; - ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; - dma-names = "tx", "rx"; - }; - - mmc5: mmc@480d5000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d5000 0x400>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc5"; - ti,needs-special-reset; - dmas = <&sdma 59>, <&sdma 60>; - dma-names = "tx", "rx"; - }; - mmu_dsp: mmu@4a066000 { compatible = "ti,omap4-iommu"; reg = <0x4a066000 0x100>; @@ -679,12 +202,6 @@ ti,iommu-bus-err-back; }; - keypad: keypad@4ae1c000 { - compatible = "ti,omap4-keypad"; - reg = <0x4ae1c000 0x400>; - ti,hwmods = "kbd"; - }; - mcpdm: mcpdm@40132000 { compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ @@ -755,55 +272,6 @@ status = "disabled"; }; - mailbox: mailbox@4a0f4000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4a0f4000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <3>; - ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <1 0 0>; - }; - mbox_dsp: mbox_dsp { - ti,mbox-tx = <3 0 0>; - ti,mbox-rx = <2 0 0>; - }; - }; - - timer1: timer@4ae18000 { - compatible = "ti,omap5430-timer"; - reg = <0x4ae18000 0x80>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; - clock-names = "fck"; - }; - - timer2: timer@48032000 { - compatible = "ti,omap5430-timer"; - reg = <0x48032000 0x80>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48034000 { - compatible = "ti,omap5430-timer"; - reg = <0x48034000 0x80>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48036000 { - compatible = "ti,omap5430-timer"; - reg = <0x48036000 0x80>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer4"; - }; - timer5: timer@40138000 { compatible = "ti,omap5430-timer"; reg = <0x40138000 0x80>, @@ -843,37 +311,6 @@ ti,timer-pwm; }; - timer9: timer@4803e000 { - compatible = "ti,omap5430-timer"; - reg = <0x4803e000 0x80>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - ti,timer-pwm; - }; - - timer10: timer@48086000 { - compatible = "ti,omap5430-timer"; - reg = <0x48086000 0x80>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - ti,timer-pwm; - }; - - timer11: timer@48088000 { - compatible = "ti,omap5430-timer"; - reg = <0x48088000 0x80>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - ti,timer-pwm; - }; - - wdt2: wdt@4ae14000 { - compatible = "ti,omap5-wdt", "ti,omap3-wdt"; - reg = <0x4ae14000 0x80>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; @@ -905,99 +342,6 @@ hw-caps-temp-alert; }; - usb3: omap_dwc3@4a020000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss"; - reg = <0x4a020000 0x10000>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - dwc3: dwc3@4a030000 { - compatible = "snps,dwc3"; - reg = <0x4a030000 0x10000>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - phys = <&usb2_phy>, <&usb3_phy>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "peripheral"; - }; - }; - - ocp2scp@4a080000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x4a080000 0x20>; - ranges; - ti,hwmods = "ocp2scp1"; - usb2_phy: usb2phy@4a084000 { - compatible = "ti,omap-usb2"; - reg = <0x4a084000 0x7c>; - syscon-phy-power = <&scm_conf 0x300>; - clocks = <&usb_phy_cm_clk32k>, - <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; - clock-names = "wkupclk", "refclk"; - #phy-cells = <0>; - }; - - usb3_phy: usb3phy@4a084400 { - compatible = "ti,omap-usb3"; - reg = <0x4a084400 0x80>, - <0x4a084800 0x64>, - <0x4a084c00 0x40>; - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x370>; - clocks = <&usb_phy_cm_clk32k>, - <&sys_clkin>, - <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>; - clock-names = "wkupclk", - "sysclk", - "refclk"; - #phy-cells = <0>; - }; - }; - - usbhstll: usbhstll@4a062000 { - compatible = "ti,usbhs-tll"; - reg = <0x4a062000 0x1000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "usb_tll_hs"; - }; - - usbhshost: usbhshost@4a064000 { - compatible = "ti,usbhs-host"; - reg = <0x4a064000 0x800>; - ti,hwmods = "usb_host_hs"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&l3init_60m_fclk>, - <&xclk60mhsp1_ck>, - <&xclk60mhsp2_ck>; - clock-names = "refclk_60m_int", - "refclk_60m_ext_p1", - "refclk_60m_ext_p2"; - - usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3"; - reg = <0x4a064800 0x400>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - remote-wakeup-connected; - }; - - usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap"; - reg = <0x4a064c00 0x400>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - bandgap: bandgap@4a0021e0 { reg = <0x4a0021e0 0xc 0x4a00232c 0xc @@ -1010,27 +354,6 @@ }; /* OCP2SCP3 */ - ocp2scp@4a090000 { - compatible = "ti,omap-ocp2scp"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x4a090000 0x20>; - ranges; - ti,hwmods = "ocp2scp3"; - sata_phy: phy@4a096000 { - compatible = "ti,phy-pipe3-sata"; - reg = <0x4A096000 0x80>, /* phy_rx */ - <0x4A096400 0x64>, /* phy_tx */ - <0x4A096800 0x40>; /* pll_ctrl */ - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - syscon-phy-power = <&scm_conf 0x374>; - clocks = <&sys_clkin>, - <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; - clock-names = "sysclk", "refclk"; - #phy-cells = <0>; - }; - }; - sata: sata@4a141100 { compatible = "snps,dwc-ahci"; reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; @@ -1184,6 +507,7 @@ coefficients = <65 (-1791)>; }; +#include "omap5-l4.dtsi" #include "omap54xx-clocks.dtsi" &gpu_thermal { diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 3228ad5fb725..ccbecad9c5c7 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -35,7 +35,7 @@ clocks = <&clks CLK_NONE>; }; - pxa27x_ohci: usb@4c000000 { + usb0: usb@4c000000 { compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index 080d5c5169b5..e83879d97aea 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -43,8 +43,6 @@ }; cpus { - #address-cells = <0>; - #size-cells = <0>; cpu { compatible = "marvell,xscale"; device_type = "cpu"; @@ -119,9 +117,9 @@ status = "disabled"; }; - hwuart: serial@41100000 { + hwuart: serial@41600000 { compatible = "mrvl,pxa-uart"; - reg = <0x41100000 0x30>; + reg = <0x41600000 0x30>; interrupts = <7>; status = "disabled"; }; @@ -136,13 +134,6 @@ status = "disabled"; }; - usb0: ohci@4c000000 { - compatible = "marvell,pxa-ohci"; - reg = <0x4c000000 0x10000>; - interrupts = <3>; - status = "disabled"; - }; - mmc0: mmc@41100000 { compatible = "marvell,pxa-mmc"; reg = <0x41100000 0x1000>; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi new file mode 100644 index 000000000000..8ac24e3c8513 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "pxa3xx.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + /* Will be overridden by bootloader */ + hw-revision = <0>; + + chosen { + bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3"; + stdout-path = &ffuart; + }; + + memory { + device_type = "memory"; + reg = <0xa0000000 0x8000000>; /* 128 MB */ + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8-fixed-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_va_5v0: regulator-va-5v0 { + compatible = "regulator-fixed"; + regulator-name = "va-5v0-fixed-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 124 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + ssp_dai0: ssp-dai0 { + compatible = "mrvl,pxa-ssp-dai"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_dai_pins>; + port = <&ssp1>; + #sound-dai-cells = <0>; + dmas = <&pdma 13 3 + &pdma 14 3>; + dma-names = "rx", "tx"; + clock-names = "extclk"; + }; + + ssp_dai1: ssp-dai1 { + compatible = "mrvl,pxa-ssp-dai"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp1_dai_pins>; + port = <&ssp2>; + #sound-dai-cells = <0>; + dmas = <&pdma 15 3 + &pdma 16 3>; + dma-names = "rx", "tx"; + clock-names = "extclk"; + }; + + spi: spi { + compatible = "spi-gpio"; + #address-cells = <0x1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>; + cs-gpios = < + &gpio 34 GPIO_ACTIVE_HIGH + &gpio 125 GPIO_ACTIVE_HIGH + &gpio 96 GPIO_ACTIVE_HIGH + >; + num-chipselects = <3>; + + dac: dac@2 { + compatible = "ti,dac7512"; + reg = <2>; + spi-max-frequency = <1000000>; + vcc-supply = <®_3v3>; + }; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + on-off { + label = "on_off button"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F6>; + }; + + rescue-boot { + label = "rescue boot button"; + gpios = <&gpio 115 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_F4>; + }; + + setup { + label = "setup"; + gpios = <&gpio 119 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_F3>; + }; + }; + + rotary: rotary-encoder { + compatible = "rotary-encoder"; + gpios = < + &gpio 19 GPIO_ACTIVE_LOW + &gpio 20 GPIO_ACTIVE_HIGH + >; + linux,axis = <REL_X>; + rotary-encoder,relative-axis; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_a &led_pins_b>; + + left { + label = "raumfeld:1"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + right { + label = "raumfeld:2"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + }; + }; + + poweroff { + compatible = "gpio-poweroff"; + pinctrl-names = "default"; + pinctrl-0 = <&poweroff_pins>; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + + mmc0_pwrseq: mmc-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pwrseq_pins>; + reset-gpios = < + &gpio 113 GPIO_ACTIVE_LOW /* W2W_RESET */ + &gpio 114 GPIO_ACTIVE_LOW /* W2W_PDN */ + >; + }; + + ethernet: ethernet@10000000 { + compatible = "smsc,lan9115"; + pinctrl-names = "default"; + pinctrl-0 = <&smsc_pins &smsc_bus_pins>; + reg = <0x10000000 0x100000>; + phy-mode = "mii"; + interrupt-parent = <&gpio>; + interrupts = <40 IRQ_TYPE_EDGE_FALLING>; + vdd33a-supply = <®_3v3>; + vddvario-supply = <®_1v8>; + reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + reg-io-width = <4>; + smsc,save-mac-address; + smsc,irq-push-pull; + }; +}; + +&ffuart { + status = "okay"; +}; + +&pwri2c { + status = "okay"; + + max8660: regulator@34 { + compatible = "maxim,max8660"; + reg = <0x34>; + + regulators { + regulator-v3 { + regulator-compatible= "V3(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-v4 { + regulator-compatible= "V4(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-v5 { + regulator-compatible= "V5(LDO)"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + + reg_vcc_sdio: regulator-v6 { + regulator-compatible= "V6(LDO)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator-v7 { + regulator-compatible= "V7(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&pxai2c1 { + status = "okay"; + mrvl,i2c-fast-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pxai2c1_pins>; +}; + +&ssp1 { + status = "okay"; +}; + +&ssp2 { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0000000 0xa0000>; + read-only; + }; + + partition@a0000 { + label = "BootloaderEnvironment"; + reg = <0x0a0000 0x20000>; + }; + + partition@c0000 { + label = "BootloaderSplashScreen"; + reg = <0x0c0000 0x60000>; + }; + + partition@120000 { + label = "UBI"; + reg = <0x120000 0x7ee0000>; + }; + }; + }; +}; + +&usb0 { + status = "okay"; + marvell,enable-port1; + marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */ + pinctrl-names = "default"; + pinctrl-0 = <&pxa3xx_ohci_pins>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + pxa-mmc,detect-delay-ms = <200>; + vmmc-supply = <®_vcc_sdio>; + mmc-pwrseq = <&mmc0_pwrseq>; + non-removable; + bus-width = <4>; +}; + +&pinctrl { + poweroff_pins: poweroff-pins { + pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + led_pins_a: led-pins-a { + pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + led_pins_b: led-pins-b { + pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH); + }; + + pxai2c1_pins: pxai2c1-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(21) MFP_AF1 /* I2C_SCL */ + MFP_PIN_PXA300(22) MFP_AF1 /* I2C_SDA */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + }; + + gpio_keys_pins: gpio-keys-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(14) MFP_AF0 /* SCK */ + MFP_PIN_PXA300(115) MFP_AF0 /* MOSI */ + MFP_PIN_PXA300(119) MFP_AF0 /* MISO */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + spi_pins: spi-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(95) MFP_AF0 /* SCK */ + MFP_PIN_PXA300(97) MFP_AF0 /* MOSI */ + MFP_PIN_PXA300(98) MFP_AF0 /* MISO */ + MFP_PIN_PXA300(34) MFP_AF0 /* CS#0 */ + MFP_PIN_PXA300(125) MFP_AF0 /* CS#1 */ + MFP_PIN_PXA300(96) MFP_AF0 /* CS#2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + pxa3xx_ohci_pins: pxa3xx-ohci-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300_2(0) MFP_AF1 /* USBHPEN */ + MFP_PIN_PXA300_2(1) MFP_AF1 /* USBHPWR */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + smsc_pins: smsc-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(39) MFP_AF0 /* RESET */ + MFP_PIN_PXA300(40) MFP_AF0 /* IRQ */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + smsc_bus_pins: smsc-bus-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(1) MFP_AF1 /* nCS2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + mmc0_pins: mmc0-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(3) MFP_AF4 /* MMC1_DAT0 */ + MFP_PIN_PXA300(4) MFP_AF4 /* MMC1_DAT1 */ + MFP_PIN_PXA300(5) MFP_AF4 /* MMC1_DAT2 */ + MFP_PIN_PXA300(6) MFP_AF4 /* MMC1_DAT3 */ + MFP_PIN_PXA300(7) MFP_AF4 /* MMC1_CLK */ + MFP_PIN_PXA300(8) MFP_AF4 /* MMC1_CMD */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH); + }; + + mmc0_pwrseq_pins: mmc0-pwrseq-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(113) MFP_AF0 /* W2W_RESET */ + MFP_PIN_PXA300(114) MFP_AF0 /* W2W_PDN */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + ssp0_dai_pins: ssp0-dai-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(85) MFP_AF1 /* SSP1_SCLK */ + MFP_PIN_PXA300(86) MFP_AF1 /* SSP1_FRM */ + MFP_PIN_PXA300(87) MFP_AF1 /* SSP1_TXD */ + MFP_PIN_PXA300(88) MFP_AF1 /* SSP1_RXD */ + MFP_PIN_PXA300(89) MFP_AF1 /* SSP1_EXTCLK */ + MFP_PIN_PXA300(90) MFP_AF1 /* SSP1_SYSCLK */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + ssp1_dai_pins: ssp1-dai-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(25) MFP_AF2 /* SSP2_SCLK */ + MFP_PIN_PXA300(26) MFP_AF2 /* SSP2_FRM */ + MFP_PIN_PXA300(27) MFP_AF2 /* SSP2_TXD */ + MFP_PIN_PXA300(29) MFP_AF2 /* SSP2_EXTCLK */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts b/arch/arm/boot/dts/pxa300-raumfeld-connector.dts new file mode 100644 index 000000000000..3e9445419e39 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-connector.dts @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" +#include "pxa300-raumfeld-tuneable-clock.dtsi" + +/ { + model = "Raumfeld Connector (PXA3xx)"; + compatible = "raumfeld,raumfeld-connector-pxa303", "marvell,pxa300"; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Raumfeld Connector"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "i2s"; + bitclock-master = <&dailink_master_analog>; + frame-master = <&dailink_master_analog>; + mclk-fs = <256>; + + dailink_master_analog: cpu { + sound-dai = <&ssp_dai0>; + }; + + codec { + sound-dai = <&cs4270>; + }; + }; + + simple-audio-card,dai-link@1 { + reg = <1>; + format = "i2s"; + bitclock-master = <&dailink_master_digital>; + frame-master = <&dailink_master_digital>; + mclk-fs = <256>; + + dailink_master_digital: cpu { + sound-dai = <&ssp_dai1>; + }; + + codec { + sound-dai = <&ak4104>; + }; + }; + }; +}; + +&ssp1 { + status = "okay"; +}; + +&ssp2 { + status = "okay"; +}; + +&spi { + ak4104: optical-transmitter@0 { + compatible = "asahi-kasei,ak4104"; + reg = <0>; + vdd-supply = <®_3v3>; + spi-max-frequency = <5000000>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; +}; + +&rotary { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts new file mode 100644 index 000000000000..65d825091f0d --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" + +/ { + model = "Raumfeld Controller (PXA3xx)"; + compatible = "raumfeld,raumfeld-controller-pxa303", "marvell,pxa300"; + + reg_vbatt: regulator-vbatt { + compatible = "regulator-fixed"; + regulator-name = "vbatt-fixed-supply"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + lcd_supply: regulator-va-tft { + compatible = "regulator-fixed"; + regulator-name = "va-tft-fixed-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + onewire { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&w1_pins>; + gpios = < + &gpio 126 GPIO_OPEN_DRAIN /* W1 I/O */ + &gpio 105 GPIO_ACTIVE_HIGH /* pullup */ + >; + + w1_ds2760: slave-ds2760 { + compatible = "maxim,ds2760"; + power-supplies = <&charger>; + }; + }; + + charger: charger { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio 101 GPIO_ACTIVE_LOW>; + }; + + /* + * One of the following two will be set to "okay" by the bootloader, + * depending on the hardware revision. + */ + backlight-controller-pwm { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + pwms = <&pwm0 10000>; + power-supply = <®_vbatt>; + status = "disabled"; + + brightness-levels = < + 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <100>; + }; + + backlight-controller { + compatible = "lltc,lt3593"; + pinctrl-names = "default"; + pinctrl-0 = <<3593_pins>; + lltc,ctrl-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + led { + label = "backlight"; + default-state = "on"; + }; + }; +}; + +®_va_5v0 { + status = "disabled"; +}; + +ðernet { + status = "disabled"; +}; + +&leds { + status = "disabled"; +}; + +&dac { + status = "disabled"; +}; + +&pwm0 { + status = "okay"; +}; + +&keys { + dock-detect { + label = "dock detect"; + gpios = <&gpio 116 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_F5>; + }; +}; + +&spi { + accelerometer@1 { + compatible = "st,lis302dl-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&lis302_pins>; + reg = <1>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <104 IRQ_TYPE_EDGE_FALLING>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + }; +}; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcdc_pins>; + lcd-supply = <&lcd_supply>; + + port { + lcdc_out: endpoint { + remote-endpoint = <&panel_in>; + bus-width = <16>; + }; + }; + + panel { + compatible = "sharp,lq043t3dx0-panel"; + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <9009000>; + pixelclk-active = <0>; /* negative edge */ + hactive = <480>; + vactive = <272>; + hsync-len = <41>; + hback-porch = <2>; + hfront-porch = <1>; + vsync-len = <10>; + vback-porch = <3>; + vfront-porch = <1>; + }; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdc_out>; + }; + }; + }; +}; + +&gcu { + status = "okay"; +}; + +&pxai2c1 { + touchscreen@a { + compatible = "eeti,exc3000-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&eeti_ts_pins>; + reg = <0xa>; + interrupt-parent = <&gpio>; + interrupts = <32 IRQ_TYPE_EDGE_RISING>; + attn-gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-y; + }; +}; + +&pinctrl { + lis302_pins: lis302-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(104) MFP_AF0 /* IRQ */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + eeti_ts_pins: eeti-ts-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(32) MFP_AF0 /* IRQ */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + lt3593_pins: lt3593-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(17) MFP_AF0 /* Backlight */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + pwm0_pins: pwm0-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(17) MFP_AF1 /* PWM */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + w1_pins: w1-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(126) MFP_AF0 /* PWM */ + MFP_PIN_PXA300(105) MFP_AF0 /* PWM */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + lcdc_pins: lcdc-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(54) MFP_AF1 /* LDD_0 */ + MFP_PIN_PXA300(55) MFP_AF1 /* LDD_1 */ + MFP_PIN_PXA300(56) MFP_AF1 /* LDD_2 */ + MFP_PIN_PXA300(57) MFP_AF1 /* LDD_3 */ + MFP_PIN_PXA300(58) MFP_AF1 /* LDD_4 */ + MFP_PIN_PXA300(59) MFP_AF1 /* LDD_5 */ + MFP_PIN_PXA300(60) MFP_AF1 /* LDD_6 */ + MFP_PIN_PXA300(61) MFP_AF1 /* LDD_7 */ + MFP_PIN_PXA300(62) MFP_AF1 /* LDD_8 */ + MFP_PIN_PXA300(63) MFP_AF1 /* LDD_9 */ + MFP_PIN_PXA300(64) MFP_AF1 /* LDD_10 */ + MFP_PIN_PXA300(65) MFP_AF1 /* LDD_11 */ + MFP_PIN_PXA300(66) MFP_AF1 /* LDD_12 */ + MFP_PIN_PXA300(67) MFP_AF1 /* LDD_13 */ + MFP_PIN_PXA300(68) MFP_AF1 /* LDD_14 */ + MFP_PIN_PXA300(69) MFP_AF1 /* LDD_15 */ + MFP_PIN_PXA300(70) MFP_AF1 /* LDD_16 */ + MFP_PIN_PXA300(71) MFP_AF1 /* LDD_17 */ + MFP_PIN_PXA300(72) MFP_AF1 /* LCD_FCLK */ + MFP_PIN_PXA300(73) MFP_AF1 /* LCD_LCLK */ + MFP_PIN_PXA300(74) MFP_AF1 /* LCD_PCLK */ + MFP_PIN_PXA300(75) MFP_AF1 /* LCD_BIAS */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts new file mode 100644 index 000000000000..5a0f7f17856f --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" +#include "pxa300-raumfeld-tuneable-clock.dtsi" + +/ { + model = "Raumfeld Speaker L (PXA3xx)"; + compatible = "raumfeld,raumfeld-speaker-l-pxa303", "marvell,pxa300"; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts new file mode 100644 index 000000000000..fa10d896282c --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" +#include "pxa300-raumfeld-tuneable-clock.dtsi" + +/ { + model = "Raumfeld Speaker M (PXA3xx)"; + compatible = "raumfeld,raumfeld-speaker-m-pxa303", "marvell,pxa300"; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts new file mode 100644 index 000000000000..5f9e37585a28 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" + +/ { + model = "Raumfeld Speaker One (PXA3xx)"; + compatible = "raumfeld,raumfeld-speaker-one-pxa303", "marvell,pxa300"; + + wm8782: wm8782 { + compatible = "wm8782"; + #sound-dai-cells = <0>; + Vdd-supply = <®_3v3>; + Vdda-supply = <®_va_5v0>; + }; + + xo_11mhz: oscillator-11mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-accuracy = <100>; + }; + + xo_audio: clock-gate { + compatible = "gpio-gate-clock"; + pinctrlnames = "default"; + pinctrl-0 = <&xo_audio_pins>; + clocks = <&xo_11mhz>; + #clock-cells = <0>; + enable-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>; + }; + + reg_va_30v0: regulator-va-30v0 { + compatible = "regulator-fixed"; + regulator-name = "va-30v0-fixed-supply"; + regulator-min-microvolt = <30000000>; + regulator-max-microvolt = <30000000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Raumfeld Speaker"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "i2s"; + bitclock-master = <&dailink_master_analog_out>; + frame-master = <&dailink_master_analog_out>; + mclk-fs = <256>; + + dailink_master_analog_out: cpu { + sound-dai = <&ssp_dai0>; + }; + + codec { + sound-dai = <&sta320>; + }; + }; + + simple-audio-card,dai-link@1 { + reg = <1>; + format = "i2s"; + bitclock-master = <&dailink_master_analog_in>; + frame-master = <&dailink_master_analog_in>; + mclk-fs = <256>; + + dailink_master_analog_in: cpu { + sound-dai = <&ssp_dai0>; + }; + + codec { + sound-dai = <&wm8782>; + }; + }; + }; +}; + +&ssp_dai0 { + clocks = <&xo_audio>; +}; + +&spi { + dac@2 { + compatible = "ti,dac7512"; + reg = <2>; + spi-max-frequency = <1000000>; + vcc-supply = <®_3v3>; + }; +}; + +&rotary { + status = "okay"; +}; + +&pxai2c1 { + sta320: codec@1a { + compatible = "st,sta32x"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&sta320_pins>; + clocks = <&xo_audio>; + clock-names = "xti"; + reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>; + Vdda-supply = <®_3v3>; + Vdd3-supply = <®_3v3>; + Vcc-supply = <®_va_30v0>; + #sound-dai-cells = <0>; + st,thermal-warning-adjustment; + st,thermal-warning-recovery; + st,fault-detect-recovery; + st,drop-compensation-ns = <80>; + st,max-power-use-mpcc; + st,invalid-input-detect-mute; + /* 2 (half-bridge) and 1 (full-bridge) on-board power */ + st,output-conf = /bits/ 8 <0x1>; + st,needs_esd_watchdog; + }; +}; + +&pinctrl { + xo_audio_pins: xo-audio-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(111) MFP_AF0 /* ENABLE */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + sta320_pins: sta320-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(120) MFP_AF0 /* CODEC_RESET */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts new file mode 100644 index 000000000000..36e20cbf8704 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "pxa300-raumfeld-common.dtsi" +#include "pxa300-raumfeld-tuneable-clock.dtsi" + +/ { + model = "Raumfeld Speaker S (PXA3xx)"; + compatible = "raumfeld,raumfeld-speaker-s-pxa303", "marvell,pxa300"; +}; diff --git a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi new file mode 100644 index 000000000000..561483b93989 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/clock/maxim,max9485.h> + +/ { + xo_27mhz: oscillator-27mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-accuracy = <100>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Raumfeld Speaker"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "i2s"; + bitclock-master = <&dailink_master_analog>; + frame-master = <&dailink_master_analog>; + mclk-fs = <256>; + + dailink_master_analog: cpu { + sound-dai = <&ssp_dai0>; + }; + + codec { + sound-dai = <&cs4270>; + }; + }; + }; +}; + +&ssp_dai0 { + clocks = <&max9485 MAX9485_CLKOUT1>; +}; + +&ssp_dai1 { + clocks = <&max9485 MAX9485_CLKOUT1>; +}; + +&pxai2c1 { + cs4270: codec@48 { + compatible = "cirrus,cs4270"; + pinctrl-names = "default"; + pinctrl-0 = <&cs4270_pins>; + reg = <0x48>; + va-supply = <®_va_5v0>; + vd-supply = <®_3v3>; + vlc-supply = <®_3v3>; + reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + max9485: clock-generator@63 { + compatible = "maxim,max9485"; + pinctrl-names = "default"; + pinctrl-0 = <&max9485_pins>; + reg = <0x63>; + vdd-supply = <®_3v3>; + clock-names = "xclk"; + clocks = <&xo_27mhz>; + reset-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>; + #clock-cells = <1>; + }; +}; + +&pinctrl { + cs4270_pins: cs4270-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(120) MFP_AF0 /* RESET */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + max9485_pins: max9485-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(111) MFP_AF0 /* RESET */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; +}; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 3a8f0edc3af9..e1e607f53ce6 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -151,8 +151,6 @@ pinctrl: pinctrl@40e10000 { compatible = "pinconf-single"; reg = <0x40e10000 0xffff>; - #address-cells = <1>; - #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7>; @@ -204,7 +202,7 @@ status = "disabled"; }; - pxa3xx_ohci: usb@4c000000 { + usb0: usb@4c000000 { compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; @@ -275,6 +273,22 @@ clocks = <&clks CLK_SSP4>; status = "disabled"; }; + + timer@40a00000 { + compatible = "marvell,pxa-timer"; + reg = <0x40a00000 0x20>; + interrupts = <26>; + clocks = <&clks CLK_OSTIMER>; + status = "okay"; + }; + + gcu: display-controller@54000000 { + compatible = "marvell,pxa300-gcu"; + reg = <0x54000000 0x1000>; + interrupts = <39>; + clocks = <&clks CLK_PXA300_GCU>; + status = "disabled"; + }; }; clocks { @@ -286,18 +300,10 @@ #size-cells = <1>; ranges; - clks: pxa3xx_clks@41300004 { + clks: clocks { compatible = "marvell,pxa300-clocks"; #clock-cells = <1>; status = "okay"; }; }; - - timer@40a00000 { - compatible = "marvell,pxa-timer"; - reg = <0x40a00000 0x20>; - interrupts = <26>; - clocks = <&clks CLK_OSTIMER>; - status = "okay"; - }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi deleted file mode 100644 index 8df73156b73a..000000000000 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -&tlmm_pinmux { - card_detect: card-detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; - }; - - pcie_pins: pcie-pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; - }; - - user_leds: user-leds { - mux { - pins = "gpio3", "gpio7", "gpio10", "gpio11"; - function = "gpio"; - }; - - conf { - pins = "gpio3", "gpio7", "gpio10", "gpio11"; - function = "gpio"; - output-low; - }; - }; - - magneto_pins: magneto-pins { - mux { - pins = "gpio31", "gpio48"; - function = "gpio"; - bias-disable; - }; - }; -}; - -&pm8921_mpps { - mpp_leds: mpp-leds { - pinconf { - pins = "mpp7", "mpp8"; - function = "digital"; - output-low; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts deleted file mode 100644 index 76b56eafaab9..000000000000 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts +++ /dev/null @@ -1,415 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" -#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/mfd/qcom-rpm.h> - -/ { - model = "Arrow Electronics, APQ8064 SD_600eval"; - compatible = "arrow,sd_600eval", "qcom,apq8064"; - - aliases { - serial0 = &gsbi7_serial; - serial1 = &gsbi1_serial; - i2c0 = &gsbi2_i2c; - i2c1 = &gsbi3_i2c; - i2c2 = &gsbi4_i2c; - i2c3 = &gsbi7_i2c; - spi0 = &gsbi5_spi; - }; - - regulators { - compatible = "simple-bus"; - vph: regulator-fixed@1 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <4500000>; - regulator-max-microvolt = <4500000>; - regulator-name = "VPH"; - regulator-type = "voltage"; - regulator-boot-on; - }; - - /* on board fixed 3.3v supply */ - vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - }; - - soc { - rpm@108000 { - regulators { - vdd_s1-supply = <&vph>; - vdd_s2-supply = <&vph>; - vdd_s3-supply = <&vph>; - vdd_s4-supply = <&vph>; - vdd_s5-supply = <&vph>; - vdd_s6-supply = <&vph>; - vdd_s7-supply = <&vph>; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l3_l15_l17-supply = <&vph>; - vdd_l4_l14-supply = <&vph>; - vdd_l5_l8_l16-supply = <&vph>; - vdd_l6_l7-supply = <&vph>; - vdd_l9_l11-supply = <&vph>; - vdd_l10_l22-supply = <&vph>; - vdd_l21_l23_l29-supply = <&vph>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s2 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - regulator-always-on; - }; - - s3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - qcom,switch-mode-frequency = <4800000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; - bias-pull-down; - regulator-always-on; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - l3 { - regulator-min-microvolt = <3050000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - l4 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - regulator-boot-on; - regulator-always-on; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - l23 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - - lvs7 { - bias-pull-down; - }; - }; - }; - - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_UART_W_FC>; - serial@12450000 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi1_uart_4pins>; - }; - }; - - gsbi@12480000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@124a0000 { - /* On Low speed expansion and Sensors */ - label = "LS-I2C0"; - status = "okay"; - lis3mdl_mag@1e { - compatible = "st,lis3mdl-magn"; - reg = <0x1e>; - vdd-supply = <&vcc3v3>; - vddio-supply = <&pm8921_s4>; - pinctrl-names = "default"; - pinctrl-0 = <&magneto_pins>; - interrupt-parent = <&tlmm_pinmux>; - - st,drdy-int-pin = <2>; - interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ - <31 IRQ_TYPE_EDGE_RISING>; /* INT */ - }; - }; - }; - - gsbi@16200000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16280000 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C1"; - clock-frequency = <200000>; - eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <64>; - }; - }; - }; - - gsbi@16300000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16380000 { - /* On High speed expansion */ - label = "HS-CAM-I2C3"; - status = "okay"; - }; - }; - - gsbi@1a200000 { - status = "okay"; - spi@1a280000 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; - }; - }; - - /* DEBUG UART */ - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - label = "LS-UART0"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi7_uart_2pins>; - }; - - i2c@16680000 { - /* On High speed expansion */ - status = "okay"; - label = "HS-CAM-I2C2"; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds>, <&mpp_leds>; - - compatible = "gpio-leds"; - - user-led0 { - label = "user0-led"; - gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - user-led1 { - label = "user1-led"; - gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - user-led2 { - label = "user2-led"; - gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - user-led3 { - label = "user3-led"; - gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - default-state = "off"; - }; - - wifi-led { - label = "WiFi-led"; - gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - bt-led { - label = "BT-led"; - gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - pci@1b500000 { - status = "okay"; - vdda-supply = <&pm8921_s3>; - vdda_phy-supply = <&pm8921_lvs6>; - vdda_refclk-supply = <&vcc3v3>; - pinctrl-0 = <&pcie_pins>; - pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - phy@1b400000 { - status = "okay"; - }; - - sata@29000000 { - status = "okay"; - target-supply = <&pm8921_lvs7>; - }; - - /* OTG */ - usb@12500000 { - status = "okay"; - dr_mode = "peripheral"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; - }; - - usb@12520000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; - }; - - usb@12530000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - }; - }; - - amba { - /* eMMC */ - sdcc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; - - /* External micro SD card */ - sdcc@12180000 { - status = "okay"; - vmmc-supply = <&pm8921_l6>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - }; - - riva-pil@3204000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; - }; - - hdmi-tx@4a00000 { - status = "okay"; - core-vdda-supply = <&pm8921_hdmi_switch>; - hdmi-mux-supply = <&vcc3v3>; - - hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; - - hdmi-phy@4a00400 { - status = "okay"; - core-vdda-supply = <&pm8921_hdmi_switch>; - }; - - mdp@5100000 { - status = "okay"; - - ports { - port@3 { - endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 0e1e98707e3f..899f28533ed7 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -412,7 +412,7 @@ }; sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <0 123 0>, <0 138 0>; @@ -425,7 +425,7 @@ }; sdhci@f98a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <0 125 0>, <0 221 0>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ed8f064d0895..51444c53fc72 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -327,8 +327,7 @@ ak8963@f { compatible = "asahi-kasei,ak8963"; reg = <0x0f>; - // Currently only works in polling mode. - // gpios = <&msmgpio 61 0>; + gpios = <&msmgpio 67 0>; vid-supply = <&pm8941_lvs1>; vdd-supply = <&pm8941_l17>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index aba159d5a95a..ca266a5f021d 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -427,11 +427,13 @@ }; }; - tsens: thermal-sensor@fc4a8000 { + tsens: thermal-sensor@fc4a9000 { compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a8000 0x2000>; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_calib>, <&tsens_backup>; nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; #thermal-sensor-cells = <1>; }; @@ -602,7 +604,7 @@ }; sdhci@f9824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, @@ -616,7 +618,7 @@ }; sdhci@f9864900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, @@ -630,7 +632,7 @@ }; sdhci@f98a4900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 383cba68dbba..12ffe73bf2bc 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7740 SoC + * Device Tree Source for the R-Mobile A1 (R8A77400) SoC * * Copyright (C) 2012 Renesas Solutions Corp. */ diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index 0e2e033cc849..b3fee1d61c87 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -31,10 +31,6 @@ }; }; -&cmt0 { - status = "okay"; -}; - &extal_clk { clock-frequency = <20000000>; }; @@ -88,11 +84,6 @@ }; }; -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 24715f74ae08..3cc33f7ff7fe 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -348,8 +348,7 @@ thermal: thermal@e61f0000 { compatible = "renesas,thermal-r8a7743", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; + "renesas,rcar-gen2-thermal"; reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 522>; diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts new file mode 100644 index 000000000000..3e58c2e92e03 --- /dev/null +++ b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave Systems RZ/G1N Qseven board development + * platform with camera daughter board + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a7744-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" +#include "iwg20d-q7-dbcm-ca.dtsi" + +/ { + model = "iWave Systems RZ/G1N Qseven development platform with camera add-on"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744"; +}; diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts new file mode 100644 index 000000000000..1fdac528f274 --- /dev/null +++ b/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave-RZ/G1N Qseven board + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a7744-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" + +/ { + model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1N"; + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744"; +}; diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi new file mode 100644 index 000000000000..82ee3c1140ef --- /dev/null +++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave RZ/G1N Qseven SOM + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include "r8a7744.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "iwave,g20m", "renesas,r8a7744"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + mmcif0_pins: mmc { + groups = "mmc_data8_b", "mmc_ctrl"; + function = "mmc"; + }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data2"; + function = "qspi"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; +}; + +&mmcif0 { + pinctrl-0 = <&mmcif0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* WARNING - This device contains the bootloader. Handle with care. */ + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + m25p,fast-read; + spi-cpol; + spi-cpha; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi new file mode 100644 index 000000000000..04148d608fc4 --- /dev/null +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -0,0 +1,1741 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a7744 SoC + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a7744-cpg-mssr.h> +#include <dt-bindings/power/r8a7744-sysc.h> + +/ { + compatible = "renesas,r8a7744"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "renesas,apmu"; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7744_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7744_PD_CA15_CPU0>; + next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7744_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7744_PD_CA15_CPU1>; + next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; + }; + + L2_CA15: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7744_PD_CA15_SCU>; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a7744-wdt", + "renesas,rcar-gen2-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7744", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 904>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 904>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7744"; + reg = <0 0xe6060000 0 0x250>; + }; + + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7744", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7744-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + apmu@e6152000 { + compatible = "renesas,r8a7744-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7744-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7744-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7744", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7744", + "renesas,rcar-gen2-thermal"; + reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-r8a7744", + "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x100>; + }; + }; + + icram2: sram@e6300000 { + compatible = "mmio-sram"; + reg = <0 0xe6300000 0 0x40000>; + }; + + /* The memory map in the User's Manual maps the cores to + * bus numbers + */ + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7744", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 925>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7744", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7744", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + + iic3: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7744"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7744", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7744", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7744-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7744-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7744", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7744", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7744", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7744", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 0x40>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 1106>; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 1107>; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7744", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 0x40>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 1108>; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7744", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7744", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7744", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 216>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 721>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 720>; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 0x40>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 719>; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 718>; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 0x40>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7744", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 0x40>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7744", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7744", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7744", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 713>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + + can0: can@e6e80000 { + compatible = "renesas,can-r8a7744", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7744_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6e88000 { + compatible = "renesas,can-r8a7744", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7744_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7744", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7744", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7744", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7744", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7744_CLK_M2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "ctu.0", "ctu.1", + "mix.0", "mix.1", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7744", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7744", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + /* + * pci1 and xhci share the same phy, therefore only one of them + * can be active at any one time. If both of them are enabled, + * a race condition will determine who'll control the phy. + * A firmware file is needed by the xhci driver in order for + * USB 3.0 to work properly. + */ + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7744", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7744", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7744", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7744", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7744", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7744", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7744", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + max-frequency = <97500000>; + status = "disabled"; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; + + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 127>; + }; + + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7744", + "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x40000>, + <0 0xfeb90000 0 0x1c>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + }; + /* placeholder */ + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7744-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7744-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 329>; + status = "disabled"; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <95000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; +}; diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index 22da819f186b..40b7f98d6013 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "r8a77470.dtsi" / { model = "iWave iW-RainboW-G23S single board computer based on RZ/G1C"; @@ -25,9 +26,43 @@ device_type = "memory"; reg = <0 0x40000000 0 0x20000000>; }; + + reg_1p8v: reg-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: reg-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi2: regulator-vccq-sdhi2 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; }; &avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy3>; phy-mode = "gmii"; renesas,no-ether-link; @@ -41,15 +76,73 @@ }; }; +&cmt0 { + status = "okay"; +}; + &extal_clk { clock-frequency = <20000000>; }; &pfc { + avb_pins: avb { + groups = "avb_mdio", "avb_gmii_tx_rx"; + function = "avb"; + }; + + mmc_pins_uhs: mmc_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data2"; + function = "qspi0"; + }; + scif1_pins: scif1 { groups = "scif1_data_b"; function = "scif1"; }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; +}; + +&qspi0 { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* WARNING - This device contains the bootloader. Handle with care. */ + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "issi,is25lp016d", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <133000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + m25p,fast-read; + spi-cpol; + spi-cpha; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; }; &scif1 { @@ -58,3 +151,29 @@ status = "okay"; }; + +&sdhi1 { + pinctrl-0 = <&mmc_pins_uhs>; + pinctrl-names = "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi2>; + bus-width = <4>; + cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 9ec78d3d0ca8..f4e232bf9d03 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -14,6 +14,14 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -71,6 +79,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77470-wdt", + "renesas,rcar-gen2-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio"; @@ -237,6 +255,62 @@ reg = <0 0xe6300000 0 0x20000>; }; + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + i2c4: i2c@e6520000 { #address-cells = <1>; #size-cells = <0>; @@ -251,6 +325,62 @@ status = "disabled"; }; + usb_dmac00: dma-controller@e65a0000 { + compatible = "renesas,r8a77470-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac10: dma-controller@e65b0000 { + compatible = "renesas,r8a77470-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac01: dma-controller@e65a8000 { + compatible = "renesas,r8a77470-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a8000 0 0x100>; + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 326>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 326>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac11: dma-controller@e65b8000 { + compatible = "renesas,r8a77470-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b8000 0 0x100>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 327>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 327>; + #dma-cells = <1>; + dma-channels = <2>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a77470", "renesas,rcar-dmac"; @@ -330,6 +460,38 @@ status = "disabled"; }; + qspi0: spi@e6b10000 { + compatible = "renesas,qspi-r8a77470", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 918>; + status = "disabled"; + }; + + qspi1: spi@ee200000 { + compatible = "renesas,qspi-r8a77470", "renesas,qspi"; + reg = <0 0xee200000 0 0x2c>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a77470", "renesas,rcar-gen2-scif", "renesas,scif"; @@ -426,6 +588,32 @@ status = "disabled"; }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a77470", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <156000000>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee300000 { + compatible = "renesas,sdhi-mmc-r8a77470"; + reg = <0 0xee300000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <156000000>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a77470", "renesas,rcar-gen2-sdhi"; @@ -435,7 +623,7 @@ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; + max-frequency = <78000000>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 312>; status = "disabled"; @@ -459,6 +647,38 @@ compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a77470-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77470-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 329>; + status = "disabled"; + }; }; timer { diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 50312e752e2f..7b9508e83d46 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -489,8 +489,6 @@ }; &lvds1 { - status = "okay"; - ports { port@1 { lvds_connector: endpoint { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index ce22db01fbba..e6580aa0cea3 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -479,8 +479,6 @@ }; &lvds0 { - status = "okay"; - ports { port@1 { lvds_connector: endpoint { diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index f02036e5de01..fefdf8238bbe 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -482,8 +482,6 @@ }; &lvds0 { - status = "okay"; - ports { port@1 { lvds_connector: endpoint { diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index eaf94976ed6d..4c1ab49c7d39 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -165,7 +165,15 @@ status = "disabled"; }; - gic: gic@44101000 { + pinctrl: pin-controller@40067000 { + compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; + reg = <0x40067000 0x1000>, <0x51000000 0x480>; + clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; + clock-names = "bus"; + status = "okay"; + }; + + gic: interrupt-controller@44101000 { compatible = "arm,cortex-a7-gic", "arm,gic-400"; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 2ab3c4b32003..30dc8af0bdcb 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3066a-cru.h> +#include <dt-bindings/power/rk3066-power.h> #include "rk3xxx.dtsi" / { @@ -70,6 +71,7 @@ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <8>; rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -87,6 +89,7 @@ clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -104,6 +107,7 @@ clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -595,6 +599,7 @@ "ppmmu2", "pp3", "ppmmu3"; + power-domains = <&power RK3066_PD_GPU>; }; &i2c0 { @@ -643,6 +648,56 @@ dma-names = "rx-tx"; }; +&pmu { + power: power-controller { + compatible = "rockchip,rk3066-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_vio@RK3066_PD_VIO { + reg = <RK3066_PD_VIO>; + clocks = <&cru ACLK_LCDC0>, + <&cru ACLK_LCDC1>, + <&cru DCLK_LCDC0>, + <&cru DCLK_LCDC1>, + <&cru HCLK_LCDC0>, + <&cru HCLK_LCDC1>, + <&cru SCLK_CIF1>, + <&cru ACLK_CIF1>, + <&cru HCLK_CIF1>, + <&cru SCLK_CIF0>, + <&cru ACLK_CIF0>, + <&cru HCLK_CIF0>, + <&cru ACLK_IPP>, + <&cru HCLK_IPP>, + <&cru ACLK_RGA>, + <&cru HCLK_RGA>; + pm_qos = <&qos_lcdc0>, + <&qos_lcdc1>, + <&qos_cif0>, + <&qos_cif1>, + <&qos_ipp>, + <&qos_rga>; + }; + + pd_video@RK3066_PD_VIDEO { + reg = <RK3066_PD_VIDEO>; + clocks = <&cru ACLK_VDPU>, + <&cru ACLK_VEPU>, + <&cru HCLK_VDPU>, + <&cru HCLK_VEPU>; + pm_qos = <&qos_vpu>; + }; + + pd_gpu@RK3066_PD_GPU { + reg = <RK3066_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + }; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pwm0_out>; diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts new file mode 100644 index 000000000000..a7477a09fbe8 --- /dev/null +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -0,0 +1,711 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 MundoReader S.L. + * Author: Heiko Stuebner <heiko.stuebner@bq.com> + */ + +/dts-v1/; +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/input/input.h> +#include "rk3188.dtsi" + +/ { + model = "BQ Edison2 Quad-Core"; + compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vsys>; + pwms = <&pwm1 0 25000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key &usb_int>; + + power { + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + debounce-interval = <100>; + wakeup-source; + }; + + wake_on_usb: wake-on-usb { + label = "Wake-on-USB"; + gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_hold>; + /* only drive the pin low until device is off */ + active-delay-ms = <3000>; + }; + + lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds_in_vop0: endpoint { + remote-endpoint = <&vop0_out_lvds>; + }; + }; + + port@1 { + reg = <1>; + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + + panel { + compatible = "innolux,ee101ia-01d", "panel-lvds"; + backlight = <&backlight>; + + /* pin LCD_CS, Nshtdn input of lvds-encoder */ + enable-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_cs>; + power-supply = <&vcc_lcd>; + + data-mapping = "vesa-24"; + height-mm = <163>; + width-mm = <261>; + + panel-timing { + clock-frequency = <72000000>; + hactive = <1280>; + vactive = <800>; + hback-porch = <160>; + hfront-porch = <16>; + hsync-len = <10>; + vback-porch = <23>; + vfront-porch = <12>; + vsync-len = <3>; + }; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on>; + reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>; + }; + + avdd_cif: cif-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd-cif"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_avdd_en>; + startup-delay-us = <100000>; + vin-supply = <&vcc28_cif>; + }; + + vcc_5v: vcc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&v5_drv>; + vin-supply = <&vsys>; + }; + + vcc_lcd: lcd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-lcd"; + gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_en>; + startup-delay-us = <50000>; + vin-supply = <&vcc_io>; + }; + + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_drv>; + startup-delay-us = <100000>; + vin-supply = <&vcc_5v>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vccq_emmc: emmc-vccq-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccq-emmc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc_io>; + }; + + /* supplied from the bq24196 */ + vsys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&cru { + assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru ACLK_CPU>, + <&cru HCLK_CPU>, <&cru PCLK_CPU>, + <&cru ACLK_PERI>, <&cru HCLK_PERI>, + <&cru PCLK_PERI>; + assigned-clock-rates = <594000000>, <504000000>, + <300000000>, + <150000000>, <75000000>, + <300000000>, <150000000>, + <75000000>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vccq_emmc>; + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + lis3de: accelerometer@29 { + compatible = "st,lis3de"; + reg = <0x29>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int>; + rotation-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + vdd-supply = <&vcc_io>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + tmp108@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tmp_alrt>; + #thermal-sensor-cells = <0>; + }; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + #clock-cells = <0>; + clock-output-names = "xin32k"; + }; + + bat: battery@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + power-supplies = <&bq24196>; + }; + + act8846: pmic@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + pinctrl-names = "default"; + pinctrl-0 = <&dvs0_ctl &pmic_int>; + + vp1-supply = <&vsys>; + vp2-supply = <&vsys>; + vp3-supply = <&vsys>; + vp4-supply = <&vsys>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vsys>; + inl3-supply = <&vsys>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_log: REG2 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_arm: REG3 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vcc_io: vcc_hdmi: REG4 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_10: REG5 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vdd_12: REG6 { + regulator-name = "VDD_12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc18_cif: REG7 { + regulator-name = "VCC18_CIF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcca_33: REG8 { + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_tp: REG9 { + regulator-name = "VCC_TP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccio_wl: REG10 { + regulator-name = "VCCIO_WL"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc28_cif: REG12 { + regulator-name = "VCC28_CIF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + }; + + bq24196: charger@6b { + compatible = "ti,bq24196"; + reg = <0x6b>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD7 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&charger_int &chg_ctl &otg_en>; + ti,system-minimum-microvolt = <3200000>; + monitored-battery = <&bat>; + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + rt5616: codec@1b { + compatible = "realtek,rt5616"; + reg = <0x1b>; + clocks = <&cru SCLK_I2S0>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; + vmmcq-supply = <&vccio_wl>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio3>; + interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + act8846 { + dvs0_ctl: dvs0-ctl { + rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + bq24196 { + charger_int: charger-int { + rockchip,pins = <0 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + /* pin hog to make it select usb profile */ + chg_ctl: chg-ctl { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + /* low: charging, high: complete, fault: blinking */ + chg_det: chg-det { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* charging enabled when pin low and register set */ + chg_en: chg-en { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; + }; + + /* bq29196 powergood (when low) signal */ + dc_det: dc-det { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* wire bq24196 otg pin to high, to enable 500mA charging */ + otg_en: otg-en { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + camera { + cif0_pdn: cif0-pdn { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cif1_pdn: cif1-pdn { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cif_avdd_en: cif-avdd-en { + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + display { + lcd_cs: lcd-cs { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lcd_en: lcd-en { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ft5606 { + tp_int: tp-int { + rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + tp_rst: tp-rst { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi { + hdmi_int: hdmi-int { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + hdmi_rst: hdmi-rst { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + pwr_hold: pwr-hold { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lis3de { + gsensor_int: gsensor-int { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + mmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + tmp108 { + tmp_alrt: tmp-alrt { + rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + v5_drv: v5-drv { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otg_drv: otg-drv { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_int: usb-int { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rk903 { + bt_host_wake: bt-host-wake { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_reg_on: bt-reg-on { + rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* pin hog to pull the reset high */ + bt_rst: bt-rst { + rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_output_high>; + }; + + bt_wake: bt-wake { + rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake: wifi-host-wake { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_reg_on: wifi-reg-on { + rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + device-wakeup-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake &bt_reg_on &bt_rst &bt_wake>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-0 = <&uart3_xfer &uart3_cts &uart3_rts>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vop0 { + status = "okay"; +}; + +&vop0_out { + vop0_out_lvds: endpoint { + remote-endpoint = <&lvds_in_vop0>; + }; +}; + +&vop1 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdc1_dclk &lcdc1_den &lcdc1_hsync + &lcdc1_vsync &lcdc1_rgb24>; + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index 375129b62102..9ae65c767c90 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -44,7 +44,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_cpu>; + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; }; &emmc { diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 4a2890618f6f..94bc81c24049 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -138,7 +138,19 @@ }; &cpu0 { - cpu0-supply = <&vdd_arm>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; }; &gpu { diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index b6f790973736..4acb501dd3f8 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3188-cru.h> +#include <dt-bindings/power/rk3188-power.h> #include "rk3xxx.dtsi" / { @@ -22,37 +23,74 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; - operating-points = < - /* kHz uV */ - 1608000 1350000 - 1416000 1250000 - 1200000 1150000 - 1008000 1075000 - 816000 975000 - 600000 950000 - 504000 925000 - 312000 875000 - >; clock-latency = <40000>; clocks = <&cru ARMCLK>; + operating-points-v2 = <&cpu0_opp_table>; + resets = <&cru SRST_CORE0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x1>; + operating-points-v2 = <&cpu0_opp_table>; + resets = <&cru SRST_CORE1>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x2>; + operating-points-v2 = <&cpu0_opp_table>; + resets = <&cru SRST_CORE2>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x3>; + operating-points-v2 = <&cpu0_opp_table>; + resets = <&cru SRST_CORE3>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <875000>; + clock-latency-ns = <40000>; + }; + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <925000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000>; + opp-suspend; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <975000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1075000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1150000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1250000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1350000>; }; }; @@ -80,6 +118,7 @@ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3188_PD_VIO>; resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; reset-names = "axi", "ahb", "dclk"; status = "disabled"; @@ -96,6 +135,7 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3188_PD_VIO>; resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; reset-names = "axi", "ahb", "dclk"; status = "disabled"; @@ -136,6 +176,7 @@ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -620,6 +661,7 @@ "ppmmu2", "pp3", "ppmmu3"; + power-domains = <&power RK3188_PD_GPU>; }; &i2c0 { @@ -652,6 +694,53 @@ pinctrl-0 = <&i2c4_xfer>; }; +&pmu { + power: power-controller { + compatible = "rockchip,rk3188-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_vio@RK3188_PD_VIO { + reg = <RK3188_PD_VIO>; + clocks = <&cru ACLK_LCDC0>, + <&cru ACLK_LCDC1>, + <&cru DCLK_LCDC0>, + <&cru DCLK_LCDC1>, + <&cru HCLK_LCDC0>, + <&cru HCLK_LCDC1>, + <&cru SCLK_CIF0>, + <&cru ACLK_CIF0>, + <&cru HCLK_CIF0>, + <&cru ACLK_IPP>, + <&cru HCLK_IPP>, + <&cru ACLK_RGA>, + <&cru HCLK_RGA>; + pm_qos = <&qos_lcdc0>, + <&qos_lcdc1>, + <&qos_cif0>, + <&qos_cif1>, + <&qos_ipp>, + <&qos_rga>; + }; + + pd_video@RK3188_PD_VIDEO { + reg = <RK3188_PD_VIDEO>; + clocks = <&cru ACLK_VDPU>, + <&cru ACLK_VEPU>, + <&cru HCLK_VDPU>, + <&cru HCLK_VEPU>; + pm_qos = <&qos_vpu>; + }; + + pd_gpu@RK3188_PD_GPU { + reg = <RK3188_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + }; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pwm0_out>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index cd8f2a3b0e91..29f19076dceb 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -493,12 +493,18 @@ map0 { trip = <&cpu_alert0>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT 6>; + <&cpu0 THERMAL_NO_LIMIT 6>, + <&cpu1 THERMAL_NO_LIMIT 6>, + <&cpu2 THERMAL_NO_LIMIT 6>, + <&cpu3 THERMAL_NO_LIMIT 6>; }; map1 { trip = <&cpu_alert1>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 50325489c0ce..32e1ab336662 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -25,7 +25,7 @@ vcc_flash: flash-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; + regulator-name = "vcc_flash"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; startup-delay-us = <150>; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index 1e0158acf895..d889ab3c8235 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -81,8 +81,10 @@ */ cpu_warm_limit_cpu { trip = <&cpu_alert_warm>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT 4>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT 4>, + <&cpu1 THERMAL_NO_LIMIT 4>, + <&cpu2 THERMAL_NO_LIMIT 4>, + <&cpu3 THERMAL_NO_LIMIT 4>; }; /* @@ -103,23 +105,25 @@ */ cpu_almost_hot_limit_cpu { trip = <&cpu_alert_almost_hot>; - cooling-device = - <&cpu0 5 6>; + cooling-device = <&cpu0 5 6>, <&cpu1 5 6>, <&cpu2 5 6>, + <&cpu3 5 6>; }; cpu_hot_limit_cpu { trip = <&cpu_alert_hot>; - cooling-device = - <&cpu0 7 7>; + cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, <&cpu2 7 7>, + <&cpu3 7 7>; }; cpu_hotter_limit_cpu { trip = <&cpu_alert_hotter>; - cooling-device = - <&cpu0 7 8>; + cooling-device = <&cpu0 7 8>, <&cpu1 7 8>, <&cpu2 7 8>, + <&cpu3 7 8>; }; cpu_very_hot_limit_cpu { trip = <&cpu_alert_very_hot>; - cooling-device = - <&cpu0 8 THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 8 THERMAL_NO_LIMIT>, + <&cpu1 8 THERMAL_NO_LIMIT>, + <&cpu2 8 THERMAL_NO_LIMIT>, + <&cpu3 8 THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 0840ffb3205c..ca7d52daa8fb 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -508,12 +508,18 @@ map0 { trip = <&cpu_alert0>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT 6>; + <&cpu0 THERMAL_NO_LIMIT 6>, + <&cpu1 THERMAL_NO_LIMIT 6>, + <&cpu2 THERMAL_NO_LIMIT 6>, + <&cpu3 THERMAL_NO_LIMIT 6>; }; map1 { trip = <&cpu_alert1>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -541,7 +547,10 @@ map0 { trip = <&gpu_alert0>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -1223,6 +1232,18 @@ }; }; + vpu: video-codec@ff9a0000 { + compatible = "rockchip,rk3288-vpu"; + reg = <0x0 0xff9a0000 0x0 0x800>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3288_PD_VIDEO>; + }; + vpu_mmu: iommu@ff9a0800 { compatible = "rockchip,iommu"; reg = <0x0 0xff9a0800 0x0 0x100>; @@ -1231,7 +1252,7 @@ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3288_PD_VIDEO>; }; hevc_mmu: iommu@ff9c0440 { diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index d752dc611fd7..97307a405e60 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -147,6 +147,46 @@ status = "disabled"; }; + qos_gpu: qos@1012d000 { + compatible = "syscon"; + reg = <0x1012d000 0x20>; + }; + + qos_vpu: qos@1012e000 { + compatible = "syscon"; + reg = <0x1012e000 0x20>; + }; + + qos_lcdc0: qos@1012f000 { + compatible = "syscon"; + reg = <0x1012f000 0x20>; + }; + + qos_cif0: qos@1012f080 { + compatible = "syscon"; + reg = <0x1012f080 0x20>; + }; + + qos_ipp: qos@1012f100 { + compatible = "syscon"; + reg = <0x1012f100 0x20>; + }; + + qos_lcdc1: qos@1012f180 { + compatible = "syscon"; + reg = <0x1012f180 0x20>; + }; + + qos_cif1: qos@1012f200 { + compatible = "syscon"; + reg = <0x1012f200 0x20>; + }; + + qos_rga: qos@1012f280 { + compatible = "syscon"; + reg = <0x1012f280 0x20>; + }; + usb_otg: usb@10180000 { compatible = "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x10180000 0x40000>; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index ed8f6ca52c5b..d31370ff28f4 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -32,6 +32,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0xf00>; + clock-latency = <40000>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <75>; @@ -66,13 +67,14 @@ arm-pmu { compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; }; timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + arm,cpu-registers-not-fw-configured; clock-frequency = <24000000>; }; @@ -117,6 +119,8 @@ clock-frequency = <24000000>; clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 6>, <&pdma 7>; + #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart2m0_xfer>; status = "disabled"; @@ -131,6 +135,8 @@ clock-frequency = <24000000>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 4>, <&pdma 5>; + #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; status = "disabled"; @@ -145,6 +151,8 @@ clock-frequency = <24000000>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 2>, <&pdma 3>; + #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "disabled"; @@ -285,6 +293,14 @@ }; }; + timer: timer@10350000 { + compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer"; + reg = <0x10350000 0x20>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>, <&cru PCLK_TIMER>; + clock-names = "timer", "pclk"; + }; + watchdog: wdt@10360000 { compatible = "snps,dw-wdt"; reg = <0x10360000 0x100>; @@ -516,6 +532,28 @@ status = "disabled"; }; + gmac: eth@30200000 { + compatible = "rockchip,rv1108-gmac"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_RX>, + <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + /* rv1108 only supports an rmii interface */ + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + gic: interrupt-controller@32010000 { compatible = "arm,gic-400"; interrupt-controller; @@ -541,7 +579,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x20030000 0x100>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>; + clocks = <&cru PCLK_GPIO0_PMU>; gpio-controller; #gpio-cells = <2>; @@ -554,7 +592,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x10310000 0x100>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>; + clocks = <&cru PCLK_GPIO1>; gpio-controller; #gpio-cells = <2>; @@ -567,7 +605,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x10320000 0x100>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>; + clocks = <&cru PCLK_GPIO2>; gpio-controller; #gpio-cells = <2>; @@ -580,7 +618,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x10330000 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>; + clocks = <&cru PCLK_GPIO3>; gpio-controller; #gpio-cells = <2>; @@ -641,6 +679,42 @@ input-enable; }; + emmc { + emmc_bus8: emmc-bus8 { + rockchip,pins = <2 RK_PA0 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA1 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA2 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA3 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA5 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA6 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA7 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc_clk: emmc-clk { + rockchip,pins = <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <2 RK_PB4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>, + <1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>, + <1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>, + <1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 RK_PB1 RK_FUNC_1 &pcfg_pull_none_smt>, diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 75f454a210d6..12eac8930eac 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -627,6 +627,15 @@ samsung,lcd-wb; }; }; + + jpeg_codec: jpeg-codec@fb600000 { + compatible = "samsung,s5pv210-jpeg"; + reg = <0xfb600000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <8>; + clocks = <&clocks CLK_JPEG>; + clock-names = "jpeg"; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index dd0dda6ed44b..dc2280d9127f 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -84,7 +84,7 @@ compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x740000 0x1000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "apb_pclk"; in-ports { @@ -100,7 +100,7 @@ compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x73C000 0x1000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "apb_pclk"; out-ports { @@ -154,7 +154,7 @@ reg = <0x00300000 0x100000 0xfc02c000 0x400>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -281,7 +281,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -290,7 +290,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00500000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -314,7 +314,7 @@ 0x1 0x0 0x60000000 0x10000000 0x2 0x0 0x70000000 0x10000000 0x3 0x0 0x80000000 0x10000000>; - clocks = <&h32ck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; status = "disabled"; nand_controller: nand-controller { @@ -333,7 +333,7 @@ compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>; clock-names = "hclock", "multclk", "baseclk"; status = "disabled"; }; @@ -342,7 +342,7 @@ compatible = "atmel,sama5d2-sdhci"; reg = <0xb0000000 0x300>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>; clock-names = "hclock", "multclk", "baseclk"; status = "disabled"; }; @@ -362,7 +362,7 @@ compatible = "atmel,sama5d2-hlcdc"; reg = <0xf0000000 0x2000>; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; @@ -388,7 +388,7 @@ compatible = "atmel,sama5d2-isc"; reg = <0xf0008000 0x4000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>; clock-names = "hclock", "iscck", "gck"; #clock-cells = <0>; clock-output-names = "isc-mck"; @@ -398,7 +398,7 @@ ramc0: ramc@f000c000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf000c000 0x200>; - clocks = <&ddrck>, <&mpddr_clk>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>; clock-names = "ddrck", "mpddr"; }; @@ -407,7 +407,7 @@ reg = <0xf0010000 0x1000>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "dma_clk"; }; @@ -417,7 +417,7 @@ reg = <0xf0004000 0x1000>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; - clocks = <&dma1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "dma_clk"; }; @@ -425,559 +425,9 @@ compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <100000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc &main_osc>; - }; - - plla: pllack { - compatible = "atmel,sama5d3-clk-pll"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <12000000 12000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - audio_pll_frac: audiopll_fracck { - compatible = "atmel,sama5d2-clk-audio-pll-frac"; - #clock-cells = <0>; - clocks = <&main>; - }; - - audio_pll_pad: audiopll_padck { - compatible = "atmel,sama5d2-clk-audio-pll-pad"; - #clock-cells = <0>; - clocks = <&audio_pll_frac>; - }; - - audio_pll_pmc: audiopll_pmcck { - compatible = "atmel,sama5d2-clk-audio-pll-pmc"; - #clock-cells = <0>; - clocks = <&audio_pll_frac>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <124000000 166000000>; - atmel,clk-divisors = <1 2 4 3>; - }; - - h32ck: h32mxck { - #clock-cells = <0>; - compatible = "atmel,sama5d4-clk-h32mx"; - clocks = <&mck>; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - - iscck: iscck { - #clock-cells = <0>; - reg = <18>; - clocks = <&mck>; - }; - }; - - periph32ck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&h32ck>; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <5>; - atmel,clk-output-range = <0 83000000>; - }; - - tdes_clk: tdes_clk { - #clock-cells = <0>; - reg = <11>; - atmel,clk-output-range = <0 83000000>; - }; - - matrix1_clk: matrix1_clk { - #clock-cells = <0>; - reg = <14>; - }; - - hsmc_clk: hsmc_clk { - #clock-cells = <0>; - reg = <17>; - }; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <18>; - atmel,clk-output-range = <0 83000000>; - }; - - flx0_clk: flx0_clk { - #clock-cells = <0>; - reg = <19>; - atmel,clk-output-range = <0 83000000>; - }; - - flx1_clk: flx1_clk { - #clock-cells = <0>; - reg = <20>; - atmel,clk-output-range = <0 83000000>; - }; - - flx2_clk: flx2_clk { - #clock-cells = <0>; - reg = <21>; - atmel,clk-output-range = <0 83000000>; - }; - - flx3_clk: flx3_clk { - #clock-cells = <0>; - reg = <22>; - atmel,clk-output-range = <0 83000000>; - }; - - flx4_clk: flx4_clk { - #clock-cells = <0>; - reg = <23>; - atmel,clk-output-range = <0 83000000>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <24>; - atmel,clk-output-range = <0 83000000>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <25>; - atmel,clk-output-range = <0 83000000>; - }; - - uart2_clk: uart2_clk { - #clock-cells = <0>; - reg = <26>; - atmel,clk-output-range = <0 83000000>; - }; - - uart3_clk: uart3_clk { - #clock-cells = <0>; - reg = <27>; - atmel,clk-output-range = <0 83000000>; - }; - - uart4_clk: uart4_clk { - #clock-cells = <0>; - reg = <28>; - atmel,clk-output-range = <0 83000000>; - }; - - twi0_clk: twi0_clk { - reg = <29>; - #clock-cells = <0>; - atmel,clk-output-range = <0 83000000>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <30>; - atmel,clk-output-range = <0 83000000>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <33>; - atmel,clk-output-range = <0 83000000>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <34>; - atmel,clk-output-range = <0 83000000>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <35>; - atmel,clk-output-range = <0 83000000>; - }; - - tcb1_clk: tcb1_clk { - #clock-cells = <0>; - reg = <36>; - atmel,clk-output-range = <0 83000000>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <38>; - atmel,clk-output-range = <0 83000000>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <40>; - atmel,clk-output-range = <0 83000000>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <41>; - atmel,clk-output-range = <0 83000000>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <42>; - atmel,clk-output-range = <0 83000000>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <43>; - atmel,clk-output-range = <0 83000000>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <44>; - atmel,clk-output-range = <0 83000000>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <47>; - atmel,clk-output-range = <0 83000000>; - }; - - pdmic_clk: pdmic_clk { - #clock-cells = <0>; - reg = <48>; - atmel,clk-output-range = <0 83000000>; - }; - - securam_clk: securam_clk { - #clock-cells = <0>; - reg = <51>; - }; - - i2s0_clk: i2s0_clk { - #clock-cells = <0>; - reg = <54>; - atmel,clk-output-range = <0 83000000>; - }; - - i2s1_clk: i2s1_clk { - #clock-cells = <0>; - reg = <55>; - atmel,clk-output-range = <0 83000000>; - }; - - can0_clk: can0_clk { - #clock-cells = <0>; - reg = <56>; - atmel,clk-output-range = <0 83000000>; - }; - - can1_clk: can1_clk { - #clock-cells = <0>; - reg = <57>; - atmel,clk-output-range = <0 83000000>; - }; - - classd_clk: classd_clk { - #clock-cells = <0>; - reg = <59>; - atmel,clk-output-range = <0 83000000>; - }; - }; - - periph64ck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - dma1_clk: dma1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - aes_clk: aes_clk { - #clock-cells = <0>; - reg = <9>; - }; - - aesb_clk: aesb_clk { - #clock-cells = <0>; - reg = <10>; - }; - - sha_clk: sha_clk { - #clock-cells = <0>; - reg = <12>; - }; - - mpddr_clk: mpddr_clk { - #clock-cells = <0>; - reg = <13>; - }; - - matrix0_clk: matrix0_clk { - #clock-cells = <0>; - reg = <15>; - }; - - sdmmc0_hclk: sdmmc0_hclk { - #clock-cells = <0>; - reg = <31>; - }; - - sdmmc1_hclk: sdmmc1_hclk { - #clock-cells = <0>; - reg = <32>; - }; - - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <45>; - }; - - isc_clk: isc_clk { - #clock-cells = <0>; - reg = <46>; - }; - - qspi0_clk: qspi0_clk { - #clock-cells = <0>; - reg = <52>; - }; - - qspi1_clk: qspi1_clk { - #clock-cells = <0>; - reg = <53>; - }; - }; - - gck { - compatible = "atmel,sama5d2-clk-generated"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>; - - sdmmc0_gclk: sdmmc0_gclk { - #clock-cells = <0>; - reg = <31>; - }; - - sdmmc1_gclk: sdmmc1_gclk { - #clock-cells = <0>; - reg = <32>; - }; - - tcb0_gclk: tcb0_gclk { - #clock-cells = <0>; - reg = <35>; - atmel,clk-output-range = <0 83000000>; - }; - - tcb1_gclk: tcb1_gclk { - #clock-cells = <0>; - reg = <36>; - atmel,clk-output-range = <0 83000000>; - }; - - pwm_gclk: pwm_gclk { - #clock-cells = <0>; - reg = <38>; - atmel,clk-output-range = <0 83000000>; - }; - - isc_gclk: isc_gclk { - #clock-cells = <0>; - reg = <46>; - }; - - pdmic_gclk: pdmic_gclk { - #clock-cells = <0>; - reg = <48>; - }; - - i2s0_gclk: i2s0_gclk { - #clock-cells = <0>; - reg = <54>; - }; - - i2s1_gclk: i2s1_gclk { - #clock-cells = <0>; - reg = <55>; - }; - - can0_gclk: can0_gclk { - #clock-cells = <0>; - reg = <56>; - atmel,clk-output-range = <0 80000000>; - }; - - can1_gclk: can1_gclk { - #clock-cells = <0>; - reg = <57>; - atmel,clk-output-range = <0 80000000>; - }; - - classd_gclk: classd_gclk { - #clock-cells = <0>; - reg = <59>; - atmel,clk-output-range = <0 100000000>; - }; - }; - - i2s_clkmux { - compatible = "atmel,sama5d2-clk-i2s-mux"; - #address-cells = <1>; - #size-cells = <0>; - - i2s0muxck: i2s0_muxclk { - clocks = <&i2s0_clk>, <&i2s0_gclk>; - #clock-cells = <0>; - reg = <0>; - }; - - i2s1muxck: i2s1_muxclk { - clocks = <&i2s1_clk>, <&i2s1_gclk>; - #clock-cells = <0>; - reg = <1>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; qspi0: spi@f0020000 { @@ -985,7 +435,7 @@ reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>; reg-names = "qspi_base", "qspi_mmap"; interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&qspi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 52>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -996,7 +446,7 @@ reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>; reg-names = "qspi_base", "qspi_mmap"; interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&qspi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 53>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1010,7 +460,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(30))>; dma-names = "tx"; - clocks = <&sha_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "sha_clk"; status = "okay"; }; @@ -1026,7 +476,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(27))>; dma-names = "tx", "rx"; - clocks = <&aes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "aes_clk"; status = "okay"; }; @@ -1042,7 +492,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(7))>; dma-names = "tx", "rx"; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; clock-names = "spi_clk"; atmel,fifo-size = <16>; #address-cells = <1>; @@ -1061,7 +511,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(22))>; dma-names = "tx", "rx"; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; clock-names = "pclk"; status = "disabled"; }; @@ -1074,7 +524,7 @@ 67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */ #address-cells = <1>; #size-cells = <0>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -1085,7 +535,7 @@ #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -1095,7 +545,7 @@ #size-cells = <0>; reg = <0xf8010000 0x100>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb1_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -1103,7 +553,7 @@ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; reg = <0xf8014000 0x1000>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; - clocks = <&hsmc_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1123,7 +573,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(50))>; dma-names = "rx"; - clocks = <&pdmic_clk>, <&pdmic_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>; clock-names = "pclk", "gclk"; status = "disabled"; }; @@ -1139,7 +589,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(36))>; dma-names = "tx", "rx"; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "usart"; status = "disabled"; }; @@ -1155,7 +605,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(38))>; dma-names = "tx", "rx"; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "usart"; status = "disabled"; }; @@ -1171,7 +621,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; dma-names = "tx", "rx"; - clocks = <&uart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "usart"; status = "disabled"; }; @@ -1189,7 +639,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; atmel,fifo-size = <16>; status = "disabled"; }; @@ -1199,7 +649,7 @@ reg = <0xf802c000 0x4000>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; }; sfr: sfr@f8030000 { @@ -1210,7 +660,7 @@ flx0: flexcom@f8034000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8034000 0x800>; @@ -1220,7 +670,7 @@ flx1: flexcom@f8038000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8038000 0x200>; - clocks = <&flx1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf8038000 0x800>; @@ -1230,7 +680,7 @@ securam: sram@f8044000 { compatible = "atmel,sama5d2-securam", "mmio-sram"; reg = <0xf8044000 0x1420>; - clocks = <&securam_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 51>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xf8044000 0x1420>; @@ -1255,7 +705,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xf8048030 0x10>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&h32ck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; }; watchdog@f8048040 { @@ -1292,10 +742,10 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(32))>; dma-names = "tx", "rx"; - clocks = <&i2s0_clk>, <&i2s0_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>; clock-names = "pclk", "gclk"; - assigned-clocks = <&i2s0muxck>; - assigned-clock-parents = <&i2s0_gclk>; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>; + assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>; status = "disabled"; }; @@ -1306,10 +756,10 @@ interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>, <64 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-names = "int0", "int1"; - clocks = <&can0_clk>, <&can0_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>; clock-names = "hclk", "cclk"; - assigned-clocks = <&can0_gclk>; - assigned-clock-parents = <&utmi>; + assigned-clocks = <&pmc PMC_TYPE_GCK 56>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; assigned-clock-rates = <40000000>; bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; status = "disabled"; @@ -1326,7 +776,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(9))>; dma-names = "tx", "rx"; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; clock-names = "spi_clk"; atmel,fifo-size = <16>; #address-cells = <1>; @@ -1345,7 +795,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(42))>; dma-names = "tx", "rx"; - clocks = <&uart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; clock-names = "usart"; status = "disabled"; }; @@ -1361,7 +811,7 @@ AT91_XDMAC_DT_PERID(44))>; dma-names = "tx", "rx"; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&uart4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "usart"; status = "disabled"; }; @@ -1369,7 +819,7 @@ flx2: flexcom@fc010000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xfc010000 0x200>; - clocks = <&flx2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xfc010000 0x800>; @@ -1379,7 +829,7 @@ flx3: flexcom@fc014000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xfc014000 0x200>; - clocks = <&flx3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xfc014000 0x800>; @@ -1389,7 +839,7 @@ flx4: flexcom@fc018000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xfc018000 0x200>; - clocks = <&flx4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xfc018000 0x800>; @@ -1400,7 +850,7 @@ compatible = "atmel,at91sam9g45-trng"; reg = <0xfc01c000 0x100>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; }; aic: interrupt-controller@fc020000 { @@ -1424,7 +874,7 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; atmel,fifo-size = <16>; status = "disabled"; }; @@ -1433,7 +883,7 @@ compatible = "atmel,sama5d2-adc"; reg = <0xfc030000 0x100>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&adc_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; clock-names = "adc_clk"; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "rx"; @@ -1466,7 +916,7 @@ #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; }; secumod@fc040000 { @@ -1485,7 +935,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(29))>; dma-names = "tx", "rx"; - clocks = <&tdes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "tdes_clk"; status = "okay"; }; @@ -1498,7 +948,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(47))>; dma-names = "tx"; - clocks = <&classd_clk>, <&classd_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>; clock-names = "pclk", "gclk"; status = "disabled"; }; @@ -1514,10 +964,10 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(34))>; dma-names = "tx", "rx"; - clocks = <&i2s1_clk>, <&i2s1_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>; clock-names = "pclk", "gclk"; - assigned-clocks = <&i2s1muxck>; - assigned-parrents = <&i2s1_gclk>; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>; + assigned-parrents = <&pmc PMC_TYPE_GCK 55>; status = "disabled"; }; @@ -1528,10 +978,10 @@ interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>, <65 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-names = "int0", "int1"; - clocks = <&can1_clk>, <&can1_gclk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>; clock-names = "hclk", "cclk"; - assigned-clocks = <&can1_gclk>; - assigned-clock-parents = <&utmi>; + assigned-clocks = <&pmc PMC_TYPE_GCK 57>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; assigned-clock-rates = <40000000>; bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 7371f2a0460f..2604fd07dd53 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -137,7 +137,7 @@ reg = <0x00400000 0x100000 0xfc02c000 0x4000>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&udphs_clk>, <&utmi>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; @@ -264,7 +264,7 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -273,7 +273,7 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -297,7 +297,7 @@ 0x1 0x0 0x60000000 0x10000000 0x2 0x0 0x70000000 0x10000000 0x3 0x0 0x80000000 0x8000000>; - clocks = <&mck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { @@ -327,7 +327,7 @@ compatible = "atmel,sama5d4-hlcdc"; reg = <0xf0000000 0x4000>; interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; @@ -356,7 +356,7 @@ reg = <0xf0004000 0x200>; interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; - clocks = <&dma1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 50>; clock-names = "dma_clk"; }; @@ -366,7 +366,7 @@ interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi_data_0_7>; - clocks = <&isi_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 52>; clock-names = "isi_clk"; status = "disabled"; port { @@ -378,7 +378,7 @@ ramc0: ramc@f0010000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf0010000 0x200>; - clocks = <&ddrck>, <&mpddr_clk>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "ddrck", "mpddr"; }; @@ -387,7 +387,7 @@ reg = <0xf0014000 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; - clocks = <&dma0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "dma_clk"; }; @@ -395,448 +395,9 @@ compatible = "atmel,sama5d4-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - - main_rc_osc: main_rc_osc { - compatible = "atmel,at91sam9x5-clk-main-rc-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCRCS>; - clock-frequency = <12000000>; - clock-accuracy = <100000000>; - }; - - main_osc: main_osc { - compatible = "atmel,at91rm9200-clk-main-osc"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCS>; - clocks = <&main_xtal>; - }; - - main: mainck { - compatible = "atmel,at91sam9x5-clk-main"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MOSCSELS>; - clocks = <&main_rc_osc &main_osc>; - }; - - plla: pllack { - compatible = "atmel,sama5d3-clk-pll"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKA>; - clocks = <&main>; - reg = <0>; - atmel,clk-input-range = <12000000 12000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>; - }; - - plladiv: plladivck { - compatible = "atmel,at91sam9x5-clk-plldiv"; - #clock-cells = <0>; - clocks = <&plla>; - }; - - utmi: utmick { - compatible = "atmel,at91sam9x5-clk-utmi"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_LOCKU>; - clocks = <&main>; - }; - - mck: masterck { - compatible = "atmel,at91sam9x5-clk-master"; - #clock-cells = <0>; - interrupt-parent = <&pmc>; - interrupts = <AT91_PMC_MCKRDY>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; - atmel,clk-output-range = <125000000 200000000>; - atmel,clk-divisors = <1 2 4 3>; - }; - - h32ck: h32mxck { - #clock-cells = <0>; - compatible = "atmel,sama5d4-clk-h32mx"; - clocks = <&mck>; - }; - - usb: usbck { - compatible = "atmel,at91sam9x5-clk-usb"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - prog: progck { - compatible = "atmel,at91sam9x5-clk-programmable"; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&pmc>; - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; - - prog0: prog0 { - #clock-cells = <0>; - reg = <0>; - interrupts = <AT91_PMC_PCKRDY(0)>; - }; - - prog1: prog1 { - #clock-cells = <0>; - reg = <1>; - interrupts = <AT91_PMC_PCKRDY(1)>; - }; - - prog2: prog2 { - #clock-cells = <0>; - reg = <2>; - interrupts = <AT91_PMC_PCKRDY(2)>; - }; - }; - - smd: smdclk { - compatible = "atmel,at91sam9x5-clk-smd"; - #clock-cells = <0>; - clocks = <&plladiv>, <&utmi>; - }; - - systemck { - compatible = "atmel,at91rm9200-clk-system"; - #address-cells = <1>; - #size-cells = <0>; - - ddrck: ddrck { - #clock-cells = <0>; - reg = <2>; - clocks = <&mck>; - }; - - lcdck: lcdck { - #clock-cells = <0>; - reg = <3>; - clocks = <&mck>; - }; - - smdck: smdck { - #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; - }; - - uhpck: uhpck { - #clock-cells = <0>; - reg = <6>; - clocks = <&usb>; - }; - - udpck: udpck { - #clock-cells = <0>; - reg = <7>; - clocks = <&usb>; - }; - - pck0: pck0 { - #clock-cells = <0>; - reg = <8>; - clocks = <&prog0>; - }; - - pck1: pck1 { - #clock-cells = <0>; - reg = <9>; - clocks = <&prog1>; - }; - - pck2: pck2 { - #clock-cells = <0>; - reg = <10>; - clocks = <&prog2>; - }; - }; - - periph32ck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&h32ck>; - - pioD_clk: pioD_clk { - #clock-cells = <0>; - reg = <5>; - }; - - usart0_clk: usart0_clk { - #clock-cells = <0>; - reg = <6>; - }; - - usart1_clk: usart1_clk { - #clock-cells = <0>; - reg = <7>; - }; - - icm_clk: icm_clk { - #clock-cells = <0>; - reg = <9>; - }; - - aes_clk: aes_clk { - #clock-cells = <0>; - reg = <12>; - }; - - tdes_clk: tdes_clk { - #clock-cells = <0>; - reg = <14>; - }; - - sha_clk: sha_clk { - #clock-cells = <0>; - reg = <15>; - }; - - matrix1_clk: matrix1_clk { - #clock-cells = <0>; - reg = <17>; - }; - - hsmc_clk: hsmc_clk { - #clock-cells = <0>; - reg = <22>; - }; - - pioA_clk: pioA_clk { - #clock-cells = <0>; - reg = <23>; - }; - - pioB_clk: pioB_clk { - #clock-cells = <0>; - reg = <24>; - }; - - pioC_clk: pioC_clk { - #clock-cells = <0>; - reg = <25>; - }; - - pioE_clk: pioE_clk { - #clock-cells = <0>; - reg = <26>; - }; - - uart0_clk: uart0_clk { - #clock-cells = <0>; - reg = <27>; - }; - - uart1_clk: uart1_clk { - #clock-cells = <0>; - reg = <28>; - }; - - usart2_clk: usart2_clk { - #clock-cells = <0>; - reg = <29>; - }; - - usart3_clk: usart3_clk { - #clock-cells = <0>; - reg = <30>; - }; - - usart4_clk: usart4_clk { - #clock-cells = <0>; - reg = <31>; - }; - - twi0_clk: twi0_clk { - reg = <32>; - #clock-cells = <0>; - }; - - twi1_clk: twi1_clk { - #clock-cells = <0>; - reg = <33>; - }; - - twi2_clk: twi2_clk { - #clock-cells = <0>; - reg = <34>; - }; - - mci0_clk: mci0_clk { - #clock-cells = <0>; - reg = <35>; - }; - - mci1_clk: mci1_clk { - #clock-cells = <0>; - reg = <36>; - }; - - spi0_clk: spi0_clk { - #clock-cells = <0>; - reg = <37>; - }; - - spi1_clk: spi1_clk { - #clock-cells = <0>; - reg = <38>; - }; - - spi2_clk: spi2_clk { - #clock-cells = <0>; - reg = <39>; - }; - - tcb0_clk: tcb0_clk { - #clock-cells = <0>; - reg = <40>; - }; - - tcb1_clk: tcb1_clk { - #clock-cells = <0>; - reg = <41>; - }; - - tcb2_clk: tcb2_clk { - #clock-cells = <0>; - reg = <42>; - }; - - pwm_clk: pwm_clk { - #clock-cells = <0>; - reg = <43>; - }; - - adc_clk: adc_clk { - #clock-cells = <0>; - reg = <44>; - }; - - dbgu_clk: dbgu_clk { - #clock-cells = <0>; - reg = <45>; - }; - - uhphs_clk: uhphs_clk { - #clock-cells = <0>; - reg = <46>; - }; - - udphs_clk: udphs_clk { - #clock-cells = <0>; - reg = <47>; - }; - - ssc0_clk: ssc0_clk { - #clock-cells = <0>; - reg = <48>; - }; - - ssc1_clk: ssc1_clk { - #clock-cells = <0>; - reg = <49>; - }; - - trng_clk: trng_clk { - #clock-cells = <0>; - reg = <53>; - }; - - macb0_clk: macb0_clk { - #clock-cells = <0>; - reg = <54>; - }; - - macb1_clk: macb1_clk { - #clock-cells = <0>; - reg = <55>; - }; - - fuse_clk: fuse_clk { - #clock-cells = <0>; - reg = <57>; - }; - - securam_clk: securam_clk { - #clock-cells = <0>; - reg = <59>; - }; - - smd_clk: smd_clk { - #clock-cells = <0>; - reg = <61>; - }; - - twi3_clk: twi3_clk { - #clock-cells = <0>; - reg = <62>; - }; - - catb_clk: catb_clk { - #clock-cells = <0>; - reg = <63>; - }; - }; - - periph64ck { - compatible = "atmel,at91sam9x5-clk-peripheral"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&mck>; - - dma0_clk: dma0_clk { - #clock-cells = <0>; - reg = <8>; - }; - - cpkcc_clk: cpkcc_clk { - #clock-cells = <0>; - reg = <10>; - }; - - aesb_clk: aesb_clk { - #clock-cells = <0>; - reg = <13>; - }; - - mpddr_clk: mpddr_clk { - #clock-cells = <0>; - reg = <16>; - }; - - matrix0_clk: matrix0_clk { - #clock-cells = <0>; - reg = <18>; - }; - - vdec_clk: vdec_clk { - #clock-cells = <0>; - reg = <19>; - }; - - dma1_clk: dma1_clk { - #clock-cells = <0>; - reg = <50>; - }; - - lcdc_clk: lcdc_clk { - #clock-cells = <0>; - reg = <51>; - }; - - isi_clk: isi_clk { - #clock-cells = <0>; - reg = <52>; - }; - }; + #clock-cells = <2>; + clocks = <&clk32k>, <&main_xtal>; + clock-names = "slow_clk", "main_xtal"; }; mmc0: mmc@f8000000 { @@ -852,7 +413,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; clock-names = "mci_clk"; }; @@ -869,7 +430,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; clock-names = "usart"; status = "disabled"; }; @@ -887,7 +448,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(27))>; dma-names = "tx", "rx"; - clocks = <&ssc0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 48>; clock-names = "pclk"; status = "disabled"; }; @@ -897,7 +458,7 @@ reg = <0xf800c000 0x300>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; - clocks = <&pwm_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; status = "disabled"; }; @@ -916,7 +477,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; clock-names = "spi_clk"; status = "disabled"; }; @@ -936,7 +497,7 @@ pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; status = "disabled"; }; @@ -955,7 +516,7 @@ pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; status = "disabled"; }; @@ -965,7 +526,7 @@ #size-cells = <0>; reg = <0xf801c000 0x100>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -977,7 +538,7 @@ pinctrl-0 = <&pinctrl_macb0_rmii>; #address-cells = <1>; #size-cells = <0>; - clocks = <&macb0_clk>, <&macb0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -997,7 +558,7 @@ pinctrl-0 = <&pinctrl_i2c2>; #address-cells = <1>; #size-cells = <0>; - clocks = <&twi2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; status = "disabled"; }; @@ -1019,7 +580,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>; - clocks = <&usart0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; @@ -1037,7 +598,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>; - clocks = <&usart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; @@ -1055,7 +616,7 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; - clocks = <&mci1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; clock-names = "mci_clk"; }; @@ -1072,7 +633,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "usart"; status = "disabled"; }; @@ -1090,7 +651,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>; - clocks = <&usart2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; clock-names = "usart"; status = "disabled"; }; @@ -1108,7 +669,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; - clocks = <&usart3_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "usart"; status = "disabled"; }; @@ -1126,7 +687,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart4>; - clocks = <&usart4_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 31>; clock-names = "usart"; status = "disabled"; }; @@ -1144,7 +705,7 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(29))>; dma-names = "tx", "rx"; - clocks = <&ssc1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "pclk"; status = "disabled"; }; @@ -1164,7 +725,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&spi1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1184,7 +745,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - clocks = <&spi2_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; clock-names = "spi_clk"; status = "disabled"; }; @@ -1195,7 +756,7 @@ #size-cells = <0>; reg = <0xfc020000 0x100>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb1_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -1205,7 +766,7 @@ #size-cells = <0>; reg = <0xfc024000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb2_clk>, <&clk32k>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; @@ -1217,7 +778,7 @@ pinctrl-0 = <&pinctrl_macb1_rmii>; #address-cells = <1>; #size-cells = <0>; - clocks = <&macb1_clk>, <&macb1_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>; clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -1226,14 +787,14 @@ compatible = "atmel,at91sam9g45-trng"; reg = <0xfc030000 0x100>; interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&trng_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 53>; }; adc0: adc@fc034000 { compatible = "atmel,at91sam9x5-adc"; reg = <0xfc034000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&adc_clk>, + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0x01f>; @@ -1276,7 +837,7 @@ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; dma-names = "tx", "rx"; - clocks = <&aes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "aes_clk"; status = "okay"; }; @@ -1290,7 +851,7 @@ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(43))>; dma-names = "tx", "rx"; - clocks = <&tdes_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "tdes_clk"; status = "okay"; }; @@ -1302,7 +863,7 @@ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(44))>; dma-names = "tx"; - clocks = <&sha_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "sha_clk"; status = "okay"; }; @@ -1311,7 +872,7 @@ compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; reg = <0xfc05c000 0x1000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; - clocks = <&hsmc_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1339,7 +900,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfc068630 0x10>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&h32ck>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; }; watchdog: watchdog@fc068640 { @@ -1370,7 +931,7 @@ interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; - clocks = <&dbgu_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; clock-names = "usart"; status = "disabled"; }; @@ -1400,7 +961,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioA_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; }; pioB: gpio@fc06b000 { @@ -1411,7 +972,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioB_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; }; pioC: gpio@fc06c000 { @@ -1422,7 +983,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioC_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; }; pioD: gpio@fc068000 { @@ -1433,7 +994,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioD_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; pioE: gpio@fc06d000 { @@ -1444,7 +1005,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pioE_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; }; /* pinctrl pin settings */ diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index e8f0a07c4564..33836990b102 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the SH73A0 SoC + * Device Tree Source for the SH-Mobile AG5 (R8A73A00/SH73A0) SoC * * Copyright (C) 2012 Renesas Solutions Corp. */ diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 2d300396f0ed..dcb8fba3d709 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2012 Altera <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2012 Altera <www.altera.com> */ #include <dt-bindings/reset/altr,rst-mgr.h> @@ -758,7 +746,6 @@ <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; interrupts = <0x0 0x90 0x4>; - dma-mask = <0xffffffff>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; status = "disabled"; @@ -771,7 +758,7 @@ qspi: spi@ff705000 { compatible = "cdns,qspi-nor"; - #address-cells = <1>; + #address-cells = <1>; #size-cells = <0>; reg = <0xff705000 0x1000>, <0xffa00000 0x1000>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 59ef13e37536..e41fa23481c3 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright Altera Corporation (C) 2014. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -664,7 +653,6 @@ <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 99 4>; - dma-mask = <0xffffffff>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; status = "disabled"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 64cc86a98771..360dae5a5b12 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2015 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "socfpga_arria10.dtsi" diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts index d14f9ccb6e10..e36e0a0f8aa6 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2015 Altera Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts index beb2fc6b9eb6..b4c0a76a4d1a 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2016 Intel. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index 5822fd2085db..df2bab1624d4 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2014-2015 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index e59461f5416e..22dbf07afcff 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2013 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2013 Altera Corporation <www.altera.com> */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index aac4feea86f3..90e676e7019f 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2013 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2013 Altera Corporation <www.altera.com> */ #include "socfpga_arria5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index 68ced67f8bfb..319a71e41ea4 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2012 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2012 Altera Corporation <www.altera.com> */ /dts-v1/; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts index 31b01a998b2e..67076e1b1c7f 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts @@ -1,17 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright Altera Corporation (C) 2015. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi index 3c03da6b8b1d..bd92806ffc12 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2015 Marek Vasut <marex@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts index c2eb88aab8b3..ceaec29770c6 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2015 Marek Vasut <marex@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "socfpga_cyclone5_mcv.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 155829f9eba1..6f138b2b2616 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2012 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2012 Altera Corporation <www.altera.com> */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index a4a555c19d94..c155ff02eb6e 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index 031c721441ff..8d5d3996f6f2 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de> */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts index 8860dd2e242c..99a71757cdf4 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> */ #include "socfpga_cyclone5.dtsi" @@ -123,9 +111,9 @@ }; &qspi { - status = "okay"; + status = "okay"; - flash0: n25q512a@0 { + flash0: n25q512a@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q512a"; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index e61efe16e79c..355b3dbf438d 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) /* - * Copyright (C) 2015 Marek Vasut <marex@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (C) 2015 Marek Vasut <marex@denx.de> */ #include "socfpga_cyclone5.dtsi" diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 547c38632c68..a77846f73b34 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -1,18 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2013 Altera Corporation <www.altera.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * Copyright (C) 2013 Altera Corporation <www.altera.com> */ /dts-v1/; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 221acd10f6c8..2f0d966f39ad 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -63,8 +63,6 @@ compatible = "gpio-keys-polled"; pinctrl-names = "default"; pinctrl-0 = <&key_pins_inet9f>; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <20>; left-joystick-left { diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index b97a0f2f20b9..d82a604f3d9c 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -76,8 +76,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; back { label = "Key Back"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 3d62a8950720..5d46bb0139fa 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -530,8 +530,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index 39504d720efc..64d50fcfcd3a 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -75,8 +75,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -89,8 +87,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -106,13 +102,7 @@ }; &pio { - mmc0_cd_pin_t003: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_t003: led_pins@0 { + led_pins_t003: led-pin { pins = "PB2"; function = "gpio_out"; drive-strength = <20>; @@ -131,7 +121,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 8d4fb9331212..c88f08984483 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -71,8 +71,6 @@ reg_vmmc1: vmmc1 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_vcc_en_pin_t004>; regulator-name = "vmmc1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -86,8 +84,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -100,8 +96,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -109,8 +103,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vmmc1>; bus-width = <4>; non-removable; @@ -127,24 +119,13 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG12"; function = "gpio_in"; bias-pull-up; }; - mmc0_cd_pin_t004: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { - pins = "PB18"; - function = "gpio_out"; - }; - - led_pins_t004: led_pins@0 { + led_pins_t004: led-pin { pins = "PB2"; function = "gpio_out"; drive-strength = <20>; @@ -158,7 +139,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index dd7fd5c3d76f..6e90ccb267aa 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -59,8 +59,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_mk802>; red { label = "mk802:red:usr"; @@ -74,8 +72,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -88,8 +84,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -97,8 +91,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; @@ -113,33 +105,14 @@ status = "okay"; }; -&pio { - led_pins_mk802: led_pins@0 { - pins = "PB2"; - function = "gpio_out"; - }; - - mmc0_cd_pin_mk802: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_mk802: usb1_vbus_pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_mk802>; gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 2c902ed2c87a..262c2ffbdcfa 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -97,7 +97,7 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_b>; + pinctrl-0 = <&emac_pa_pins>; phy = <&phy1>; status = "okay"; }; @@ -117,8 +117,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -130,8 +128,6 @@ #include "axp152.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; at24@50 { @@ -143,8 +139,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -152,35 +146,35 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@191 { + button-191 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <191274>; }; - button@392 { + button-392 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <392644>; }; - button@601 { + button-601 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <601151>; }; - button@795 { + button-795 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; voltage = <795090>; }; - button@987 { + button-987 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; @@ -197,8 +191,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -206,8 +198,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */ @@ -223,30 +213,13 @@ }; &pio { - mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - pins = "PG13"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxino: led_pins@0 { + led_pins_olinuxino: led-pin { pins = "PE3"; function = "gpio_out"; drive-strength = <20>; }; - usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG12"; function = "gpio_in"; bias-pull-up; @@ -259,15 +232,14 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>, - <&spi2_cs0_pins_b>; + pinctrl-0 = <&spi2_pb_pins>, + <&spi2_cs0_pb_pin>; status = "okay"; }; @@ -277,19 +249,19 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_b>; + pinctrl-0 = <&uart2_pc_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; + pinctrl-0 = <&uart3_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 034853d1c08f..b2a49a216ebf 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -76,8 +76,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -85,8 +83,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; @@ -98,33 +94,21 @@ }; &pio { - mmc0_cd_pin_r7: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_r7: led_pins@0 { + led_pins_r7: led-pin { pins = "PB2"; function = "gpio_out"; drive-strength = <20>; }; - - usb1_vbus_pin_r7: usb1_vbus_pin@0 { - pins = "PG13"; - function = "gpio_out"; - }; }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_r7>; gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index 3f68ef5d92a0..b5ee8fb13a92 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -61,8 +61,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_wobo_i5>; blue { label = "a10s-wobo-i5:blue:usr"; @@ -73,8 +71,6 @@ reg_emac_3v3: emac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&emac_power_pin_wobo>; regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -94,7 +90,7 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; + pinctrl-0 = <&emac_pd_pins>; phy = <&phy1>; status = "okay"; }; @@ -104,8 +100,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -126,8 +120,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */ @@ -142,24 +134,6 @@ status = "okay"; }; -&pio { - led_pins_wobo_i5: led_pins@0 { - pins = "PB2"; - function = "gpio_out"; - }; - - mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { - pins = "PB3"; - function = "gpio_in"; - bias-pull-up; - }; - - emac_power_pin_wobo: emac_power_pin@0 { - pins = "PA02"; - function = "gpio_out"; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -206,7 +180,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 316cb8b2945b..09c486b608b2 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -42,15 +42,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include "sun5i.dtsi" #include <dt-bindings/dma/sun4i-a10.h> / { - interrupt-parent = <&intc>; - aliases { ethernet0 = &emac; }; @@ -60,7 +56,7 @@ #size-cells = <1>; ranges; - framebuffer@2 { + framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -76,7 +72,7 @@ allwinner,pipelines = <&fe0>; }; - soc@1c00000 { + soc { hdmi: hdmi@1c16000 { compatible = "allwinner,sun5i-a10s-hdmi"; reg = <0x01c16000 0x1000>; @@ -104,8 +100,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -125,20 +119,25 @@ compatible = "allwinner,sun5i-a10s-ccu"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; + &pio { compatible = "allwinner,sun5i-a10s-pinctrl"; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB19", "PB20"; function = "uart0"; }; - uart2_pins_b: uart2@1 { + uart2_pc_pins: uart2-pc-pins { pins = "PC18", "PC19"; function = "uart2"; }; - emac_pins_b: emac0@1 { + emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -147,27 +146,24 @@ function = "emac"; }; - mmc1_pins_a: mmc1@0 { + mmc1_pins: mmc1-pins { pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; function = "mmc1"; drive-strength = <30>; }; - spi2_pins_b: spi2@1 { + spi2_pb_pins: spi2-pb-pins { pins = "PB12", "PB13", "PB14"; function = "spi2"; }; - spi2_cs0_pins_b: spi2_cs0@1 { + spi2_cs0_pb_pin: spi2-cs0-pb-pin { pins = "PB11"; function = "spi2"; }; }; -&sram_a { -}; - &tcon0_out { tcon0_out_hdmi: endpoint@2 { reg = <2>; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 378214d8316e..f3cede9beb63 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -78,8 +78,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -91,8 +89,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; pcf8563: rtc@51 { @@ -105,14 +101,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -121,8 +117,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -134,19 +128,13 @@ }; &pio { - mmc0_cd_pin_d709: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PG1"; function = "gpio_in"; bias-pull-down; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; @@ -155,7 +143,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -197,7 +185,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 7ee0c3f6d7a1..9369f7453beb 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -69,8 +69,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -80,8 +78,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; pcf8563: rtc@51 { @@ -91,8 +87,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -100,14 +94,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -116,8 +110,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -133,22 +125,11 @@ }; &pio { - mmc0_cd_pin_h702: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PG1"; - function = "gpio_in"; - }; }; #include "axp209.dtsi" @@ -191,7 +172,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; @@ -202,7 +183,7 @@ &usbphy { pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + pinctrl-0 = <&usb0_id_detect_pin>; usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts index bc883893f4a4..ca8f3fd1ddfe 100644 --- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -94,8 +94,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -109,14 +107,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "disabled"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "disabled"; }; @@ -124,7 +118,7 @@ vref-supply = <®_ldo2>; status = "okay"; - button@984 { + button-984 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; @@ -133,8 +127,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; broken-cd; @@ -143,7 +135,7 @@ &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_a>; + pinctrl-0 = <&mmc2_4bit_pc_pins>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; broken-cd; @@ -204,7 +196,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index aa4b34fd9126..943868e495bc 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -77,26 +77,18 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -112,56 +104,38 @@ }; &pio { - mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxinom: led_pins@0 { + led_pins_olinuxinom: led-pin { pins = "PG9"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PG1"; function = "gpio_in"; bias-pull-down; }; - - usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { - pins = "PG12"; - function = "gpio_out"; - }; - - usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - pins = "PG11"; - function = "gpio_out"; - }; }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_olinuxinom>; gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 437ad913a373..9409c232d48a 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -123,8 +123,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -138,14 +136,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -153,35 +147,35 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@191 { + button-191 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <191274>; }; - button@392 { + button-392 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <392644>; }; - button@601 { + button-601 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <601151>; }; - button@795 { + button-795 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; voltage = <795090>; }; - button@987 { + button-987 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; @@ -190,8 +184,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -207,34 +199,23 @@ }; &pio { - mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxino: led_pins@0 { + led_pins_olinuxino: led-pin { pins = "PG9"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PG1"; function = "gpio_in"; bias-pull-down; }; - - usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - pins = "PG11"; - function = "gpio_out"; - }; }; ®_usb0_vbus { @@ -243,7 +224,6 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -263,7 +243,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index bfdd38d6bfcc..732873cbeedc 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -58,7 +58,7 @@ /delete-property/stdout-path; }; - i2c_lcd: i2c@0 { + i2c_lcd: i2c-gpio { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; pinctrl-names = "default"; @@ -79,13 +79,9 @@ allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ }; -&codec_pa_pin { - pins = "PG3"; -}; - &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_8bit_pins>; vmmc-supply = <®_vcc3v3>; bus-width = <8>; non-removable; @@ -99,7 +95,7 @@ }; &pio { - i2c_lcd_pins: i2c_lcd_pin@0 { + i2c_lcd_pins: i2c-lcd-pin { pins = "PG10", "PG12"; function = "gpio_out"; bias-pull-up; @@ -128,7 +124,3 @@ /* The P66 uses the uart pins as gpios */ status = "disabled"; }; - -&usb0_vbus_pin_a { - pins = "PB4"; -}; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index b1d827765530..ae04955fd9a3 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -42,15 +42,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include "sun5i.dtsi" #include <dt-bindings/thermal/thermal.h> / { - interrupt-parent = <&intc>; - thermal-zones { cpu_thermal { /* milliseconds */ @@ -88,7 +84,7 @@ allwinner,pipelines = <&fe0>; }; - soc@1c00000 { + soc { pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts index c55b11a4d3c7..3f70b8c53132 100644 --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -79,8 +79,6 @@ mmc0_pwrseq: mmc0_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_reg_on_pin_chip_pro>; reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ }; }; @@ -94,8 +92,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -114,20 +110,16 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "disabled"; }; &i2s0 { pinctrl-names = "default"; - pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>; + pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>; status = "disabled"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc0_pwrseq>; bus-width = <4>; @@ -137,7 +129,7 @@ &nfc { pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; status = "okay"; nand@0 { @@ -157,21 +149,9 @@ status = "okay"; }; -&pio { - usb0_id_pin_chip_pro: usb0-id-pin@0 { - pins = "PG2"; - function = "gpio_in"; - }; - - wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; -}; - &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>; + pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>; status = "disabled"; }; @@ -220,19 +200,19 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>; + pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>; status = "disabled"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>; status = "okay"; }; @@ -253,8 +233,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pin_chip_pro>; usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_vcc5v0>; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 5f0adc0f7bb4..86e46aa59134 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -123,8 +123,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -143,8 +141,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; wm8978: codec@1a { @@ -160,20 +156,18 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &i2s0 { pinctrl-names = "default"; - pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>; + pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; @@ -181,49 +175,49 @@ vref-supply = <®_ldo2>; status = "okay"; - button@190 { + button-190 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <190000>; }; - button@390 { + button-390 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <390000>; }; - button@600 { + button-600 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Search"; linux,code = <KEY_SEARCH>; channel = <0>; voltage = <800000>; }; - button@980 { + button-980 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; voltage = <980000>; }; - button@1180 { + button-1180 { label = "Esc"; linux,code = <KEY_ESC>; channel = <0>; voltage = <1180000>; }; - button@1400 { + button-1400 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; @@ -232,8 +226,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -242,7 +234,7 @@ &nfc { pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; /* MLC Support sucks for now */ status = "disabled"; @@ -256,31 +248,9 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 { - pins = "PG0"; - function = "gpio_in"; - }; - - usb0_id_pin_gr8_evb: usb0-id-pin@0 { - pins = "PG2"; - function = "gpio_in"; - }; - - usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 { - pins = "PG1"; - function = "gpio_in"; - }; - - usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 { - pins = "PG13"; - function = "gpio_out"; - }; -}; - &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -310,7 +280,6 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_gr8_evb>; gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -321,7 +290,7 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; @@ -331,7 +300,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>; status = "okay"; }; @@ -356,8 +325,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>; usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus_power-supply = <&usb_power_supply>; diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi index ef0b7446a99d..98a8fd5e89e8 100644 --- a/arch/arm/boot/dts/sun5i-gr8.dtsi +++ b/arch/arm/boot/dts/sun5i-gr8.dtsi @@ -54,7 +54,7 @@ allwinner,pipelines = <&fe0>; }; - soc@1c00000 { + soc { pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; @@ -98,28 +98,28 @@ &pio { compatible = "nextthing,gr8-pinctrl"; - i2s0_data_pins_a: i2s0-data@0 { + i2s0_data_pins: i2s0-data-pins { pins = "PB6", "PB7", "PB8", "PB9"; function = "i2s0"; }; - i2s0_mclk_pins_a: i2s0-mclk@0 { + i2s0_mclk_pin: i2s0-mclk-pin { pins = "PB5"; function = "i2s0"; }; - pwm1_pins: pwm1 { + pwm1_pins: pwm1-pin { pins = "PG13"; function = "pwm1"; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PB10"; function = "spdif"; bias-pull-up; }; - uart1_cts_rts_pins_a: uart1-cts-rts@0 { + uart1_cts_rts_pins: uart1-cts-rts-pins { pins = "PG5", "PG6"; function = "uart1"; }; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index 879a4b0f3bd5..f4298facf9dc 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -79,8 +79,6 @@ mmc0_pwrseq: mmc0_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&chip_wifi_reg_on_pin>; reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ }; @@ -109,8 +107,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -137,14 +133,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "disabled"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; xio: gpio@38 { @@ -161,13 +153,11 @@ }; }; -&mmc0_pins_a { +&mmc0_pins { bias-pull-up; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc0_pwrseq>; bus-width = <4>; @@ -184,22 +174,7 @@ }; &pio { - chip_vbus_pin: chip_vbus_pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; - - chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 { - pins = "PC19"; - function = "gpio_out"; - }; - - chip_id_det_pin: chip_id_det_pin@0 { - pins = "PG2"; - function = "gpio_in"; - }; - - chip_w1_pin: chip_w1_pin@0 { + chip_w1_pin: chip-w1-pin { pins = "PD2"; function = "gpio_in"; bias-pull-up; @@ -260,7 +235,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&chip_vbus_pin>; vin-supply = <®_vcc5v0>; gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ status = "okay"; @@ -268,7 +242,7 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; + pinctrl-0 = <&spi2_pe_pins>; status = "disabled"; }; @@ -282,14 +256,14 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>, - <&uart3_cts_rts_pins_a>; + pinctrl-0 = <&uart3_pg_pins>, + <&uart3_cts_rts_pg_pins>; status = "okay"; }; @@ -303,8 +277,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&chip_id_det_pin>; status = "okay"; usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index d2a2eb8b3f26..6202aabedbfe 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -63,8 +63,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ status = "okay"; }; @@ -96,8 +94,6 @@ reg = <0x40>; interrupt-parent = <&pio>; interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin>; power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ /* Tablet dts must provide reg and compatible */ status = "disabled"; @@ -125,7 +121,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -137,40 +133,17 @@ }; &pio { - codec_pa_pin: codec_pa_pin@0 { - pins = "PG10"; - function = "gpio_out"; - }; - - mmc0_cd_pin: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - ts_power_pin: ts_power_pin { - pins = "PB3"; - function = "gpio_out"; - drive-strength = <10>; - bias-disable; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PG1"; function = "gpio_in"; bias-pull-down; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PG2"; function = "gpio_in"; bias-pull-up; }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - pins = "PG12"; - function = "gpio_out"; - }; }; ®_dcdc2 { @@ -211,7 +184,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 9cd65c46720b..5497d985c54a 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -42,14 +42,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/clock/sun5i-ccu.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/reset/sun5i-ccu.h> / { interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; @@ -68,7 +68,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -77,7 +77,7 @@ status = "disabled"; }; - framebuffer@1 { + framebuffer-lcd0-tve0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; @@ -93,14 +93,14 @@ #size-cells = <1>; ranges; - osc24M: clk@1c20050 { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -114,7 +114,7 @@ ranges; /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: cma@4a000000 { + default-pool { compatible = "shared-dma-pool"; size = <0x6000000>; alloc-ranges = <0x4a000000 0x6000000>; @@ -123,7 +123,7 @@ }; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -326,6 +326,8 @@ clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; clock-names = "ahb", "mmc"; interrupts = <32>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -446,7 +448,7 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - emac_pins_a: emac0@0 { + emac_pd_pins: emac-pd-pins { pins = "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", @@ -455,27 +457,27 @@ function = "emac"; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PB15", "PB16"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PB17", "PB18"; function = "i2c2"; }; - ir0_rx_pins_a: ir0@0 { + ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; - lcd_rgb565_pins: lcd_rgb565@0 { + lcd_rgb565_pins: lcd-rgb565-pins { pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD19", "PD20", "PD21", "PD22", "PD23", @@ -483,7 +485,7 @@ function = "lcd0"; }; - lcd_rgb666_pins: lcd_rgb666@0 { + lcd_rgb666_pins: lcd-rgb666-pins { pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", @@ -491,7 +493,7 @@ function = "lcd0"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -499,7 +501,7 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15"; @@ -508,7 +510,7 @@ bias-pull-up; }; - mmc2_4bit_pins_a: mmc2-4bit@0 { + mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; function = "mmc2"; @@ -516,7 +518,7 @@ bias-pull-up; }; - nand_pins_a: nand-base0@0 { + nand_pins: nand-pins { pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -524,57 +526,57 @@ function = "nand0"; }; - nand_cs0_pins_a: nand-cs@0 { + nand_cs0_pin: nand-cs0-pin { pins = "PC4"; function = "nand0"; }; - nand_rb0_pins_a: nand-rb@0 { + nand_rb0_pin: nand-rb0-pin { pins = "PC6"; function = "nand0"; }; - spi2_pins_a: spi2@0 { + spi2_pe_pins: spi2-pe-pins { pins = "PE1", "PE2", "PE3"; function = "spi2"; }; - spi2_cs0_pins_a: spi2-cs0@0 { + spi2_cs0_pe_pin: spi2-cs0-pe-pin { pins = "PE0"; function = "spi2"; }; - uart1_pins_a: uart1@0 { + uart1_pe_pins: uart1-pe-pins { pins = "PE10", "PE11"; function = "uart1"; }; - uart1_pins_b: uart1@1 { + uart1_pg_pins: uart1-pg-pins { pins = "PG3", "PG4"; function = "uart1"; }; - uart2_pins_a: uart2@0 { + uart2_pd_pins: uart2-pd-pins { pins = "PD2", "PD3"; function = "uart2"; }; - uart2_cts_rts_pins_a: uart2-cts-rts@0 { + uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins { pins = "PD4", "PD5"; function = "uart2"; }; - uart3_pins_a: uart3@0 { + uart3_pg_pins: uart3-pg-pins { pins = "PG9", "PG10"; function = "uart3"; }; - uart3_cts_rts_pins_a: uart3-cts-rts@0 { + uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { pins = "PG11", "PG12"; function = "uart3"; }; - pwm0_pins: pwm0 { + pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; @@ -678,6 +680,8 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&ccu CLK_APB1_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -688,6 +692,8 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&ccu CLK_APB1_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -698,6 +704,8 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&ccu CLK_APB1_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index 7f34323a668c..32d22025ac99 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -65,22 +65,14 @@ status = "okay"; }; -&pio { - usb1_vbus_pin_a: usb1_vbus_pin@0 { - pins = "PH27"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_a>; gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 939c497a6f70..0b7bedf85fb9 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -60,7 +60,7 @@ stdout-path = "serial0:115200n8"; }; - i2c_lcd: i2c@0 { + i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; pinctrl-names = "default"; @@ -77,7 +77,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -88,20 +88,14 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "fail"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; mma8452: mma8452@1d { @@ -113,31 +107,14 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &pio { - mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - - usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - pins = "PH24"; - function = "gpio_out"; - }; - - i2c_lcd_pins: i2c_lcd_pin@0 { + i2c_lcd_pins: i2c-lcd-pins { pins = "PA23", "PA24"; function = "gpio_out"; bias-pull-up; @@ -145,15 +122,13 @@ }; ®_usb2_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_colombus>; gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index ce4f9e9834bf..e17a65b3561e 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -160,7 +160,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; @@ -184,21 +184,15 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; /* pull-ups and devices require AXP221 DLDO3 */ status = "failed"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; pcf8563: rtc@51 { @@ -209,27 +203,18 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&mmc0_pins_a { - /* external pull-ups missing for some pins */ - bias-pull-up; -}; - &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -241,24 +226,6 @@ status = "okay"; }; -&pio { - gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { - pins = "PA21"; - function = "gpio_out"; - }; - - mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - - wifi_reset_pin_hummingbird: wifi_reset_pin@0 { - pins = "PG10"; - function = "gpio_out"; - }; -}; - &p2wi { status = "okay"; @@ -354,7 +321,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index d659be9dbc50..0832ac5ae3ec 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -71,8 +71,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_i7>; blue { label = "i7:blue:usr"; @@ -118,7 +116,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -140,47 +138,25 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; -&pio { - led_pins_i7: led_pins@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_i7: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_i7: usb1_vbus_pin@0 { - pins = "PC27"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_i7>; gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; spdif-out = "okay"; status = "okay"; }; @@ -191,7 +167,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 9698f6d38d03..6eafb6361a26 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -60,8 +60,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m9>; blue { label = "m9:blue:pwr"; @@ -85,7 +83,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; @@ -98,13 +96,11 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ @@ -124,24 +120,6 @@ #include "axp22x.dtsi" -&pio { - led_pins_m9: led_pins@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_m9: usb1_vbus_pin@0 { - pins = "PC27"; - function = "gpio_out"; - }; -}; - ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -215,15 +193,13 @@ }; ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_m9>; gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index bb14b171b160..ca036f97923a 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -60,8 +60,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m9>; blue { label = "a1000g:blue:pwr"; @@ -85,7 +83,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; @@ -98,13 +96,11 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ @@ -124,24 +120,6 @@ #include "axp22x.dtsi" -&pio { - led_pins_m9: led_pins@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_m9: usb1_vbus_pin@0 { - pins = "PC27"; - function = "gpio_out"; - }; -}; - ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -215,15 +193,13 @@ }; ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_m9>; gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index debc0bf22ea3..353d90f99b40 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -52,6 +50,8 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; aliases { ethernet0 = &gmac; @@ -62,7 +62,7 @@ #size-cells = <1>; ranges; - simplefb_hdmi: framebuffer@0 { + simplefb_hdmi: framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -73,7 +73,7 @@ status = "disabled"; }; - simplefb_lcd: framebuffer@1 { + simplefb_lcd: framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -115,7 +115,7 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; @@ -131,7 +131,7 @@ #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; @@ -147,7 +147,7 @@ #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; @@ -174,7 +174,10 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -196,12 +199,8 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - pmu { - compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, @@ -213,13 +212,13 @@ #size-cells = <1>; ranges; - osc24M: osc24M { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -235,14 +234,14 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: clk@1 { + mii_phy_tx_clk: clk-mii-phy-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: clk@2 { + gmac_int_tx_clk: clk-gmac-int-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -264,7 +263,7 @@ status = "disabled"; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -389,6 +388,8 @@ resets = <&ccu RST_AHB1_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -408,6 +409,8 @@ resets = <&ccu RST_AHB1_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -607,7 +610,7 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - gmac_pins_gmii_a: gmac_gmii@0 { + gmac_gmii_pins: gmac-gmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", @@ -623,7 +626,7 @@ drive-strength = <30>; }; - gmac_pins_mii_a: gmac_mii@0 { + gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", "PA12", "PA13", "PA14", "PA19", @@ -632,7 +635,7 @@ function = "gmac"; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA19", @@ -645,22 +648,22 @@ drive-strength = <40>; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PH14", "PH15"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PH16", "PH17"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PH18", "PH19"; function = "i2c2"; }; - lcd0_rgb888_pins: lcd0_rgb888 { + lcd0_rgb888_pins: lcd0-rgb888-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", @@ -671,7 +674,7 @@ function = "lcd0"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -679,7 +682,7 @@ bias-pull-up; }; - mmc1_pins_a: mmc1@0 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -687,7 +690,7 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_4bit_pins: mmc2-4bit-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; function = "mmc2"; @@ -695,7 +698,7 @@ bias-pull-up; }; - mmc2_8bit_emmc_pins: mmc2@1 { + mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", @@ -705,7 +708,7 @@ bias-pull-up; }; - mmc3_8bit_emmc_pins: mmc3@1 { + mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", @@ -715,12 +718,12 @@ bias-pull-up; }; - spdif_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PH28"; function = "spdif"; }; - uart0_pins_a: uart0@0 { + uart0_ph_pins: uart0-ph-pins { pins = "PH20", "PH21"; function = "uart0"; }; @@ -879,6 +882,8 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB2_I2C0>; resets = <&ccu RST_APB2_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -890,6 +895,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB2_I2C1>; resets = <&ccu RST_APB2_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -901,6 +908,8 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB2_I2C2>; resets = <&ccu RST_APB2_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1373,12 +1382,12 @@ #size-cells = <0>; #gpio-cells = <3>; - ir_pins_a: ir@0 { + s_ir_rx_pin: s-ir-rx-pin { pins = "PL4"; function = "s_ir"; }; - p2wi_pins: p2wi { + s_p2wi_pins: s-p2wi-pins { pins = "PL0", "PL1"; function = "s_p2wi"; }; @@ -1392,7 +1401,7 @@ clock-frequency = <100000>; resets = <&apb0_rst 3>; pinctrl-names = "default"; - pinctrl-0 = <&p2wi_pins>; + pinctrl-0 = <&s_p2wi_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts index 882a4d89fa22..a2ef7846e2c8 100644 --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts @@ -53,7 +53,7 @@ vref-supply = <®_aldo3>; status = "okay"; - button@1000 { + button-1000 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts index 75e578159c3a..72a02c045a38 100644 --- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -66,7 +66,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -77,7 +77,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; @@ -87,7 +87,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts index e584e6b186a7..c5e2c55cdc63 100644 --- a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts +++ b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts @@ -54,8 +54,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; ft5406ee8: touchscreen@38 { @@ -73,21 +71,21 @@ vref-supply = <®_aldo3>; status = "okay"; - button@200 { + button-200 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <200000>; }; - button@900 { + button-900 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <900000>; }; - button@1200 { + button-1200 { label = "Back"; linux,code = <KEY_BACK>; channel = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 4cb9664cdb29..60b355f7184c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -90,19 +90,13 @@ &i2c0 { /* pull-ups and device VDDIO use AXP221 DLDO3 */ - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "failed"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; ctp@5d { - pinctrl-names = "default"; - pinctrl-0 = <>911_int_primo81>; compatible = "goodix,gt911"; reg = <0x5d>; interrupt-parent = <&pio>; @@ -112,8 +106,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; accelerometer@1c { @@ -131,14 +123,14 @@ vref-supply = <®_aldo3>; status = "okay"; - button@158 { + button-158 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <158730>; }; - button@349 { + button-349 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -147,8 +139,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ @@ -156,22 +146,11 @@ }; &pio { - gt911_int_primo81: gt911_int_pin@0 { - pins = "PA3"; - function = "gpio_in"; - }; - - mma8452_int_primo81: mma8452_int_pin@0 { + mma8452_int_primo81: mma8452-int-pin { pins = "PA9"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_primo81: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; }; &p2wi { diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index d7325bc4eeb4..3099491de8c4 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -135,7 +135,7 @@ /* UART0 pads available on core board */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index da0ccf5a2c44..4865c3271ab0 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -66,8 +66,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pin_sina31s>; status { label = "sina31s:status:usr"; @@ -116,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; @@ -139,7 +137,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; @@ -147,14 +145,14 @@ vref-supply = <®_aldo3>; status = "okay"; - button@158 { + button-158 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <158730>; }; - button@349 { + button-349 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -163,8 +161,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ @@ -175,19 +171,6 @@ status = "okay"; }; -&pio { - led_pin_sina31s: led_pin@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { - pins = "PA4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -196,7 +179,7 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index b8b79c0e9ee0..8e724c52feff 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -58,8 +58,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bpi_m2>; blue { label = "bpi-m2:blue:usr"; @@ -79,8 +77,6 @@ mmc2_pwrseq: mmc2_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ }; }; @@ -95,7 +91,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_dldo1>; @@ -111,26 +107,20 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_4bit_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; @@ -146,10 +136,6 @@ }; }; -&mmc2_pins_a { - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -167,31 +153,6 @@ }; }; -&pio { - gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { - pins = "PA21"; - function = "gpio_out"; - }; - - led_pins_bpi_m2: led_pins@0 { - pins = "PG5", "PG10", "PG11"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { - pins = "PA4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - -&r_pio { - mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { - pins = "PL8"; - function = "gpio_out"; - }; -}; - #include "axp22x.dtsi" ®_aldo1 { @@ -291,7 +252,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index aab6c1720ef7..2504e7189c54 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -62,14 +62,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -89,27 +85,13 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &p2wi { status = "okay"; @@ -189,7 +171,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 4e72e4f3ef96..86143de21c22 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -66,7 +66,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ @@ -74,13 +74,7 @@ }; &pio { - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PA15"; function = "gpio_in"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 763cb03033c4..e2bfe0058830 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bpi_m1p>; green { label = "bananapi-m1-plus:green:usr"; @@ -90,15 +88,11 @@ mmc3_pwrseq: mmc3_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>; reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ }; reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bpi_m1p>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -134,7 +128,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -156,8 +150,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -175,13 +167,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -191,8 +181,6 @@ &mmc3 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -209,11 +197,6 @@ }; }; -&mmc3_pins_a { - /* AP6210 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -226,29 +209,6 @@ status = "okay"; }; -&pio { - gmac_power_pin_bpi_m1p: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_bpi_m1p: led_pins@0 { - pins = "PH24", "PH25"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -280,7 +240,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 70dfc4ac0bb5..556b1b591c5d 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -76,8 +76,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bananapi>; green { label = "bananapi:green:usr"; @@ -87,8 +85,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bananapi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -134,7 +130,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -156,8 +152,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -168,20 +162,16 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -252,27 +242,11 @@ "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", "", "", "", "", "", "", "", ""; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - gmac_power_pin_bananapi: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_bananapi: led_pins@0 { - pins = "PH24"; - function = "gpio_out"; - }; }; #include "axp209.dtsi" @@ -316,27 +290,27 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; + pinctrl-0 = <&uart3_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 0898eb6162f5..0176e9de0180 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bananapro>; blue { label = "bananapro:blue:usr"; @@ -78,15 +76,11 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_bananapro>; reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; }; reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bananapro>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -114,7 +108,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -126,8 +120,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -142,20 +134,16 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -163,8 +151,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -188,74 +174,39 @@ status = "okay"; }; -&pio { - gmac_power_pin_bananapro: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_bananapro: led_pins@0 { - pins = "PH24", "PG2"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - pins = "PH0"; - function = "gpio_out"; - }; - - usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - pins = "PH1"; - function = "gpio_out"; - }; - - vmmc3_pin_bananapro: vmmc3_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_bananapro>; gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ status = "okay"; }; &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_b>; + pinctrl-0 = <&uart4_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 942ac9dfd4a5..200685b0b1cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard2>; blue { label = "cubieboard2:blue:usr"; @@ -116,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -137,8 +135,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -149,20 +145,16 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -182,12 +174,7 @@ }; &pio { - led_pins_cubieboard2: led_pins@0 { - pins = "PH20", "PH21"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -239,7 +226,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 5649161de1d7..99f531b8d2a7 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubietruck>; blue { label = "cubietruck:blue:usr"; @@ -100,9 +98,9 @@ mmc3_pwrseq: mmc3_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ + clocks = <&ccu CLK_OUT_A>; + clock-names = "ext_clock"; }; sound { @@ -151,7 +149,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -172,8 +170,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -185,25 +181,20 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -211,8 +202,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -228,11 +217,6 @@ }; }; -&mmc3_pins_a { - /* AP6210 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -246,45 +230,18 @@ }; &pio { - ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - pins = "PH12"; - function = "gpio_out"; - }; - - led_pins_cubietruck: led_pins@0 { - pins = "PH7", "PH11", "PH20", "PH21"; - function = "gpio_out"; - }; - - mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 { - pins = "PH9"; - function = "gpio_out"; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - pins = "PH17"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH19"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH22"; - function = "gpio_in"; - }; + /* Pin outputs low power clock for WiFi and BT */ + pinctrl-0 = <&clk_out_a_pin>; + pinctrl-names = "default"; }; &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>; status = "okay"; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_cubietruck>; gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -325,7 +282,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_a>; gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -340,14 +296,31 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ccu CLK_OUT_A>; + clock-names = "lpo"; + device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ + host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ + shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ + max-speed = <1500000>; + }; }; &usb_otg { @@ -360,8 +333,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ usb0_vbus_power-supply = <&usb_power_supply>; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 1f0e5ecbf0c4..fd0153f65685 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -67,8 +67,6 @@ reg_mmc3_vdd: mmc3_vdd { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>; regulator-name = "mmc3_vdd"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -78,8 +76,6 @@ reg_gmac_vdd: gmac_vdd { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>; regulator-name = "gmac_vdd"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -103,7 +99,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_vdd>; @@ -120,8 +116,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -135,32 +129,24 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -168,8 +154,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_mmc3_vdd>; bus-width = <4>; non-removable; @@ -184,42 +168,18 @@ status = "okay"; }; -&pio { - ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - pins = "PH2"; - function = "gpio_out"; - }; - - mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - pins = "PH9"; - function = "gpio_out"; - }; - - gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - pins = "PH16"; - function = "gpio_out"; - }; -}; - &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; }; @@ -230,38 +190,38 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>, - <&spi2_cs0_pins_b>; + pinctrl-0 = <&spi2_pb_pins>, + <&spi2_cs0_pb_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; + pinctrl-0 = <&uart4_pg_pins>; status = "okay"; }; &uart5 { pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins_a>; + pinctrl-0 = <&uart5_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 2e3f2f29d124..5f1c4f573d3e 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -61,8 +61,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_i12_tvbox>; red { label = "i12_tvbox:red:usr"; @@ -77,8 +75,6 @@ reg_vmmc3: vmmc3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_i12_tvbox>; regulator-name = "vmmc3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -88,8 +84,6 @@ reg_vmmc3_io: vmmc3-io { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>; regulator-name = "vmmc3-io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -101,8 +95,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_i12_tvbox>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -122,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <®_gmac_3v3>; @@ -134,8 +126,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -151,13 +141,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -165,8 +153,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; @@ -181,11 +167,6 @@ }; }; -&mmc3_pins_a { - /* AP6210 / AP6330 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -194,28 +175,6 @@ status = "okay"; }; -&pio { - vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - pins = "PH2"; - function = "gpio_out"; - }; - - vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - pins = "PH12"; - function = "gpio_out"; - }; - - gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - pins = "PH21"; - function = "gpio_out"; - }; - - led_pins_i12_tvbox: led_pins@0 { - pins = "PH9", "PH20"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -226,7 +185,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts index 926fa194eb1b..949494730aee 100644 --- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -74,7 +74,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -85,8 +85,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -97,14 +95,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */ @@ -156,7 +150,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 1b05ba466e7d..b90a7607d069 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -96,7 +96,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -115,13 +115,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -129,7 +127,7 @@ }; &pio { - led_pins_itead_core: led_pins@0 { + led_pins_itead_core: led-pins { pins = "PH20","PH21"; function = "gpio_out"; drive-strength = <20>; @@ -142,6 +140,6 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index b1ab7c1c33e3..f91e1bee44e8 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_lamobo_r1>; green { label = "lamobo_r1:green:usr"; @@ -85,8 +83,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_lamobo_r1>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -123,10 +119,12 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; + /delete-property/#address-cells; + /delete-property/#size-cells; fixed-link { speed = <1000>; @@ -141,8 +139,6 @@ switch: ethernet-switch@1e { compatible = "brcm,bcm53125"; reg = <30>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; @@ -199,8 +195,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -211,20 +205,16 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -240,27 +230,11 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - gmac_power_pin_lamobo_r1: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_lamobo_r1: led_pins@0 { - pins = "PH24"; - function = "gpio_out"; - }; }; #include "axp209.dtsi" @@ -314,27 +288,27 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; + pinctrl-0 = <&uart3_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index e91a209850bc..b8a1aaaf3976 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m3>; blue { label = "m3:blue:usr"; @@ -83,7 +81,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -94,8 +92,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -111,13 +107,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -125,8 +119,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; @@ -141,13 +133,6 @@ status = "okay"; }; -&pio { - led_pins_m3: led_pins@0 { - pins = "PH20"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -158,7 +143,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index 6109f794a9c1..1491c603f661 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -106,8 +106,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -121,20 +119,14 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -153,18 +145,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH4"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH5"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -179,13 +159,13 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; status = "okay"; }; @@ -195,8 +175,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts index 81ebc97b76ee..20bf09b2226c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts @@ -21,8 +21,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index f080f82b58ef..f0e6a96e5785 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olimex_som_evb>; green { label = "a20-olimex-som-evb:green:usr"; @@ -112,7 +110,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -133,8 +131,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -145,14 +141,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -160,49 +152,49 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@190 { + button-190 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <190000>; }; - button@390 { + button-390 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <390000>; }; - button@600 { + button-600 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Search"; linux,code = <KEY_SEARCH>; channel = <0>; voltage = <800000>; }; - button@980 { + button-980 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; voltage = <980000>; }; - button@1180 { + button-1180 { label = "Esc"; linux,code = <KEY_ESC>; channel = <0>; voltage = <1180000>; }; - button@1400 { + button-1400 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; @@ -211,8 +203,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -220,8 +210,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */ @@ -241,36 +229,14 @@ }; &pio { - ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olimex_som_evb: led_pins@0 { + led_pins_olimex_som_evb: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - - mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 { - pins = "PH0"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH4"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH5"; - function = "gpio_in"; - }; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -316,33 +282,33 @@ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart6 { pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; + pinctrl-0 = <&uart6_pi_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; @@ -352,8 +318,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts index c56620a8fb20..a59755a2e7a9 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts @@ -20,8 +20,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index 3d7b5c848fef..823aabce0462 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -78,7 +78,7 @@ &can0 { pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; + pinctrl-0 = <&can_ph_pins>; status = "okay"; }; @@ -104,7 +104,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy3>; phy-mode = "rgmii"; phy-supply = <®_vcc3v3>; @@ -130,8 +130,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -143,8 +141,6 @@ /* Exposed to UEXT1 */ &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -156,20 +152,16 @@ /* Exposed to UEXT2 */ &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; @@ -177,8 +169,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&rtl_pwrseq>; bus-width = <4>; @@ -203,8 +193,8 @@ }; &pio { - bt_uart_pins: bt_uart_pins@0 { - pins = "PG6", "PG7", "PG8"; + uart3_rts_pin: uart3-rts-pin { + pins = "PG8"; function = "uart3"; }; }; @@ -274,43 +264,43 @@ /* Exposed to UEXT1 */ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; /* Exposed to UEXT2 */ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; /* Used for RTL8723BS bluetooth */ &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&bt_uart_pins>; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>; status = "okay"; }; /* Exposed to UEXT1 */ &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; + pinctrl-0 = <&uart4_pg_pins>; status = "okay"; }; /* Exposed to UEXT2 */ &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index d20fd03596e9..5e411194bf62 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -105,7 +105,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -126,8 +126,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -142,8 +140,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -154,8 +150,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -175,24 +169,19 @@ }; &pio { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olinuxinolime: led_pins@0 { + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -200,7 +189,6 @@ }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -219,7 +207,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 81f376f2a44d..decb014a382b 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -48,23 +48,12 @@ compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20"; mmc2_pwrseq: pwrseq { - pinctrl-0 = <&mmc2_pins_nrst>; - pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; }; }; -&pio { - mmc2_pins_nrst: mmc2-rst-pin { - pins = "PC16"; - function = "gpio_out"; - }; -}; - &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; vqmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index ffafe9720b35..4e1c590eb098 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -110,7 +110,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -131,8 +131,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -143,8 +141,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -154,9 +150,11 @@ }; }; +&lradc { + vref-supply = <®_vcc3v0>; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -176,37 +174,26 @@ }; &pio { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olinuxinolime: led_pins@0 { + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; }; - - usb0_vbus_pin_lime2: usb0_vbus_pin@0 { - pins = "PC17"; - function = "gpio_out"; - }; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -256,7 +243,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_lime2>; gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -271,7 +257,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts index d99e7b193efe..2337b44a88aa 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts @@ -54,8 +54,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 866d230593be..840ae1194a66 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -117,7 +117,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>; + pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -138,8 +138,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -150,8 +148,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -162,8 +158,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -171,49 +165,49 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@191 { + button-191 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <191274>; }; - button@392 { + button-392 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <392644>; }; - button@601 { + button-601 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <601151>; }; - button@795 { + button-795 { label = "Search"; linux,code = <KEY_SEARCH>; channel = <0>; voltage = <795090>; }; - button@987 { + button-987 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; voltage = <987387>; }; - button@1184 { + button-1184 { label = "Esc"; linux,code = <KEY_ESC>; channel = <0>; voltage = <1184678>; }; - button@1398 { + button-1398 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; @@ -222,8 +216,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -231,8 +223,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ @@ -252,30 +242,24 @@ }; &pio { - gmac_txerr: gmac_txerr@0 { + gmac_txerr: gmac-txerr-pin { pins = "PA17"; function = "gmac"; }; - mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - pins = "PH11"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxino: led_pins@0 { + led_pins_olinuxino: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -331,33 +315,33 @@ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart6 { pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; + pinctrl-0 = <&uart6_pi_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index f5c7178eb063..15881081cac4 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_orangepi>; green { label = "orangepi:green:usr"; @@ -90,8 +88,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_orangepi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -123,7 +119,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -145,8 +141,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -160,13 +154,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -174,8 +166,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ @@ -187,43 +177,11 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { - pins = "PH11"; - function = "gpio_in"; - bias-pull-up; - }; - - usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; - - gmac_power_pin_orangepi: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_orangepi: led_pins@0 { - pins = "PH24", "PH25"; - function = "gpio_out"; - }; - - usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - pins = "PH26"; - function = "gpio_out"; - }; }; ®_dcdc2 { @@ -256,20 +214,18 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_bananapro>; gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 7a4244e57589..d64de2e73a9f 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_orangepi>; green { label = "orangepi:green:usr"; @@ -74,8 +72,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_orangepi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -99,7 +95,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -111,8 +107,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -126,13 +120,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -144,37 +136,11 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; - - gmac_power_pin_orangepi: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_orangepi: led_pins@0 { - pins = "PH24"; - function = "gpio_out"; - }; - - usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - pins = "PH26"; - function = "gpio_out"; - }; }; ®_dcdc2 { @@ -207,20 +173,18 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_bananapro>; gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index bfca960b03e0..538ea15fa32f 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -71,8 +71,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_pcduino3_nano>; /* Marked "LED3" on the PCB. */ usr1 { @@ -115,7 +113,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -136,8 +134,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -149,13 +145,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -175,30 +169,14 @@ }; &pio { - ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { - pins = "PH2"; - function = "gpio_out"; - }; - - led_pins_pcduino3_nano: led_pins@0 { - pins = "PH16", "PH15"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - pins = "PD2"; - function = "gpio_out"; - }; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>; gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; }; @@ -232,14 +210,13 @@ /* A single regulator (U24) powers both USB host ports. */ ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index c576f101fbde..a72ed4318d04 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_pcduino3>; tx { label = "pcduino3:green:tx"; @@ -77,23 +75,22 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&key_pins_pcduino3>; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + + back { label = "Key Back"; linux,code = <KEY_BACK>; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - button@1 { + + home { label = "Key Home"; linux,code = <KEY_HOME>; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - button@2 { + + menu { label = "Key Menu"; linux,code = <KEY_MENU>; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; @@ -124,7 +121,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -135,8 +132,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -150,13 +145,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -176,17 +169,7 @@ }; &pio { - led_pins_pcduino3: led_pins@0 { - pins = "PH15", "PH16"; - function = "gpio_out"; - }; - - key_pins_pcduino3: key_pins@0 { - pins = "PH17", "PH18", "PH19"; - function = "gpio_in"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -233,7 +216,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 8202c87ca6a3..ffade253d129 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -63,8 +63,6 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_enable_pin>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ }; @@ -74,8 +72,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -93,8 +89,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -107,14 +101,10 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; gt911: touchscreen@5d { @@ -122,8 +112,6 @@ reg = <0x5d>; interrupt-parent = <&pio>; interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_reset_pin>; irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */ reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */ touchscreen-swapped-x-y; @@ -134,14 +122,14 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@571 { + button-571 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <571428>; }; - button@761 { + button-761 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -150,8 +138,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -171,22 +157,7 @@ }; &pio { - bl_enable_pin: bl_enable_pin@0 { - pins = "PH7"; - function = "gpio_out"; - }; - - codec_pa_pin: codec_pa_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - ts_reset_pin: ts_reset_pin@0 { - pins = "PB13"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -195,7 +166,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -238,7 +209,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index ff5c1086585c..c27e56091fb1 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -62,8 +62,6 @@ mmc3_pwrseq: mmc3_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; }; @@ -82,7 +80,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -93,8 +91,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -105,22 +101,16 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; #include "axp209.dtsi" &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -128,8 +118,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -158,12 +146,7 @@ }; &pio { - vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { - pins = "PH9"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -209,7 +192,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 02e40da9f028..641a8fa6d428 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/dma/sun4i-a10.h> @@ -52,6 +50,8 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; aliases { ethernet0 = &gmac; @@ -62,7 +62,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -73,7 +73,7 @@ status = "disabled"; }; - framebuffer@1 { + framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -83,7 +83,7 @@ status = "disabled"; }; - framebuffer@2 { + framebuffer-lcd0-tve0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; @@ -118,7 +118,7 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; @@ -148,7 +148,8 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -170,17 +171,13 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: cma@4a000000 { + default-pool { compatible = "shared-dma-pool"; size = <0x6000000>; alloc-ranges = <0x4a000000 0x6000000>; @@ -198,7 +195,7 @@ }; pmu { - compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; @@ -208,14 +205,14 @@ #size-cells = <1>; ranges; - osc24M: clk@1c20050 { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -231,14 +228,14 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: clk@1 { + mii_phy_tx_clk: clk-mii-phy-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: clk@2 { + gmac_int_tx_clk: clk-gmac-int-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -261,7 +258,7 @@ status = "disabled"; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -517,6 +514,8 @@ "output", "sample"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -551,6 +550,8 @@ "output", "sample"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -568,6 +569,8 @@ "output", "sample"; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -665,8 +668,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -750,22 +751,22 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - can0_pins_a: can0@0 { + can_ph_pins: can-ph-pins { pins = "PH20", "PH21"; function = "can"; }; - clk_out_a_pins_a: clk_out_a@0 { + clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; }; - clk_out_b_pins_a: clk_out_b@0 { + clk_out_b_pin: clk-out-b-pin { pins = "PI13"; function = "clk_out_b"; }; - emac_pins_a: emac0@0 { + emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -774,7 +775,7 @@ function = "emac"; }; - gmac_pins_mii_a: gmac_mii@0 { + gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -783,7 +784,7 @@ function = "gmac"; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA10", @@ -797,47 +798,47 @@ drive-strength = <40>; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; - i2c3_pins_a: i2c3@0 { + i2c3_pins: i2c3-pins { pins = "PI0", "PI1"; function = "i2c3"; }; - ir0_rx_pins_a: ir0@0 { + ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; - ir0_tx_pins_a: ir0@1 { + ir0_tx_pin: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; - ir1_rx_pins_a: ir1@0 { + ir1_rx_pin: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; - ir1_tx_pins_a: ir1@1 { + ir1_tx_pin: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -845,7 +846,7 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_pins: mmc2-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; function = "mmc2"; @@ -853,7 +854,7 @@ bias-pull-up; }; - mmc3_pins_a: mmc3@0 { + mmc3_pins: mmc3-pins { pins = "PI4", "PI5", "PI6", "PI7", "PI8", "PI9"; function = "mmc3"; @@ -861,118 +862,128 @@ bias-pull-up; }; - ps20_pins_a: ps20@0 { + ps2_0_pins: ps2-0-pins { pins = "PI20", "PI21"; function = "ps2"; }; - ps21_pins_a: ps21@0 { + ps2_1_ph_pins: ps2-1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; - pwm0_pins_a: pwm0@0 { + pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; - pwm1_pins_a: pwm1@0 { + pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; - spi0_pins_a: spi0@0 { + spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; - spi0_cs0_pins_a: spi0_cs0@0 { + spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; - spi0_cs1_pins_a: spi0_cs1@0 { + spi0_cs1_pi_pin: spi0-cs1-pi-pin { pins = "PI14"; function = "spi0"; }; - spi1_pins_a: spi1@0 { + spi1_pi_pins: spi1-pi-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; - spi1_cs0_pins_a: spi1_cs0@0 { + spi1_cs0_pi_pin: spi1-cs0-pi-pin { pins = "PI16"; function = "spi1"; }; - spi2_pins_a: spi2@0 { - pins = "PC20", "PC21", "PC22"; + spi2_pb_pins: spi2-pb-pins { + pins = "PB15", "PB16", "PB17"; function = "spi2"; }; - spi2_pins_b: spi2@1 { - pins = "PB15", "PB16", "PB17"; + spi2_cs0_pb_pin: spi2-cs0-pb-pin { + pins = "PB14"; function = "spi2"; }; - spi2_cs0_pins_a: spi2_cs0@0 { - pins = "PC19"; + spi2_pc_pins: spi2-pc-pins { + pins = "PC20", "PC21", "PC22"; function = "spi2"; }; - spi2_cs0_pins_b: spi2_cs0@1 { - pins = "PB14"; + spi2_cs0_pc_pin: spi2-cs0-pc-pin { + pins = "PC19"; function = "spi2"; }; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; - uart2_pins_a: uart2@0 { - pins = "PI16", "PI17", "PI18", "PI19"; + uart2_pi_pins: uart2-pi-pins { + pins = "PI18", "PI19"; function = "uart2"; }; - uart3_pins_a: uart3@0 { - pins = "PG6", "PG7", "PG8", "PG9"; + uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins { + pins = "PI16", "PI17"; + function = "uart2"; + }; + + uart3_pg_pins: uart3-pg-pins { + pins = "PG6", "PG7"; + function = "uart3"; + }; + + uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { + pins = "PG8", "PG9"; function = "uart3"; }; - uart3_pins_b: uart3@1 { + uart3_ph_pins: uart3-ph-pins { pins = "PH0", "PH1"; function = "uart3"; }; - uart4_pins_a: uart4@0 { + uart4_pg_pins: uart4-pg-pins { pins = "PG10", "PG11"; function = "uart4"; }; - uart4_pins_b: uart4@1 { + uart4_ph_pins: uart4-ph-pins { pins = "PH4", "PH5"; function = "uart4"; }; - uart5_pins_a: uart5@0 { + uart5_pi_pins: uart5-pi-pins { pins = "PI10", "PI11"; function = "uart5"; }; - uart6_pins_a: uart6@0 { + uart6_pi_pins: uart6-pi-pins { pins = "PI12", "PI13"; function = "uart6"; }; - uart7_pins_a: uart7@0 { + uart7_pi_pins: uart7-pi-pins { pins = "PI20", "PI21"; function = "uart7"; }; @@ -1213,6 +1224,8 @@ reg = <0x01c2ac00 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1224,6 +1237,8 @@ reg = <0x01c2b000 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1235,6 +1250,8 @@ reg = <0x01c2b400 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1246,6 +1263,8 @@ reg = <0x01c2b800 0x400>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index c16ffcc4db7d..a9c123de5d2c 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-a23-a33-ccu.h> @@ -51,13 +49,15 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; chosen { #address-cells = <1>; #size-cells = <1>; ranges; - simplefb_lcd: framebuffer@0 { + simplefb_lcd: framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -118,7 +118,7 @@ }; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -169,6 +169,8 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -298,22 +300,30 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - uart0_pins_a: uart0@0 { - pins = "PF2", "PF4"; - function = "uart0"; + i2c0_pins: i2c0-pins { + pins = "PH2", "PH3"; + function = "i2c0"; }; - uart1_pins_a: uart1@0 { - pins = "PG6", "PG7"; - function = "uart1"; + i2c1_pins: i2c1-pins { + pins = "PH4", "PH5"; + function = "i2c1"; }; - uart1_pins_cts_rts_a: uart1-cts-rts@0 { - pins = "PG8", "PG9"; - function = "uart1"; + i2c2_pins: i2c2-pins { + pins = "PE12", "PE13"; + function = "i2c2"; }; - mmc0_pins_a: mmc0@0 { + lcd_rgb666_pins: lcd-rgb666-pins { + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; + }; + + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -321,7 +331,7 @@ bias-pull-up; }; - mmc1_pins_a: mmc1@0 { + mmc1_pg_pins: mmc1-pg-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -329,7 +339,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -370,32 +380,24 @@ bias-pull-up; }; - pwm0_pins: pwm0 { + pwm0_pin: pwm0-pin { pins = "PH0"; function = "pwm0"; }; - i2c0_pins_a: i2c0@0 { - pins = "PH2", "PH3"; - function = "i2c0"; - }; - - i2c1_pins_a: i2c1@0 { - pins = "PH4", "PH5"; - function = "i2c1"; + uart0_pf_pins: uart0-pf-pins { + pins = "PF2", "PF4"; + function = "uart0"; }; - i2c2_pins_a: i2c2@0 { - pins = "PE12", "PE13"; - function = "i2c2"; + uart1_pg_pins: uart1-pg-pins { + pins = "PG6", "PG7"; + function = "uart1"; }; - lcd_rgb666_pins: lcd-rgb666@0 { - pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - function = "lcd0"; + uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins { + pins = "PG8", "PG9"; + function = "uart1"; }; }; @@ -499,6 +501,8 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -510,6 +514,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -521,6 +527,8 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -565,11 +573,11 @@ }; rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + compatible = "allwinner,sun8i-a23-rtc"; + reg = <0x01f00000 0x400>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clock-output-names = "osc32k"; + clock-output-names = "osc32k", "osc32k-out"; clocks = <&ext_osc32k>; #clock-cells = <1>; }; @@ -656,18 +664,16 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <0>; #gpio-cells = <3>; - r_rsb_pins: r_rsb { + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; drive-strength = <20>; bias-pull-up; }; - r_uart_pins_a: r_uart@0 { + r_uart_pins_a: r-uart-pins { pins = "PL2", "PL3"; function = "s_uart"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts index 8a93697df3a5..53fb1be0401a 100644 --- a/arch/arm/boot/dts/sun8i-a23-evb.dts +++ b/arch/arm/boot/dts/sun8i-a23-evb.dts @@ -65,14 +65,10 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; @@ -80,21 +76,21 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@190 { + button-190 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <190000>; }; - button@390 { + button-390 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <390000>; }; - button@600 { + button-600 { label = "Home"; linux,code = <KEY_HOME>; channel = <0>; @@ -103,22 +99,12 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ status = "okay"; }; -&pio { - mmc0_cd_pin_evb: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - /* * The RX line has a non-populated resistance. In order to use it, you * need to solder R207 on the back of the board in order to close the diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts index e3c7a25ca37d..bcbc9b0758f9 100644 --- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts +++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts @@ -63,7 +63,7 @@ }; &lradc { - button@600 { + button-600 { label = "Back"; linux,code = <KEY_BACK>; channel = <0>; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts index 649e31339662..d5f6aebd7216 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -54,8 +54,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_mid2407>; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ post-power-on-delay-ms = <200>; @@ -71,7 +69,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -85,17 +83,6 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - -&r_pio { - wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 { - pins = "PL6"; - function = "gpio_out"; - }; -}; - &touchscreen { reg = <0x40>; compatible = "silead,gsl1680"; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts index 6b3bcae089f2..9f9232a2fefb 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -54,8 +54,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_mid2809>; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ post-power-on-delay-ms = <200>; @@ -64,7 +62,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -78,17 +76,6 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - -&r_pio { - wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 { - pins = "PL6"; - function = "gpio_out"; - }; -}; - &touchscreen { reg = <0x40>; compatible = "silead,gsl3670"; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 58e6585b504b..d00055e9eef5 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -45,11 +45,7 @@ #include "sun8i-a23-a33.dtsi" / { - memory { - reg = <0x40000000 0x40000000>; - }; - - soc@1c00000 { + soc { codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a23-codec"; diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts index f71159987cac..2dfdd0a3151e 100644 --- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts @@ -69,7 +69,7 @@ }; &lradc { - button@600 { + button-600 { label = "Back"; linux,code = <KEY_BACK>; channel = <0>; @@ -79,7 +79,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts index 3e05959104f1..317763069c0a 100644 --- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts @@ -70,13 +70,9 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; bus-width = <4>; non-removable; @@ -88,7 +84,7 @@ }; &r_pio { - led_pin_d978: led_pin_d978@0 { + led_pin_d978: led-pin { pins = "PL5"; function = "gpio_out"; drive-strength = <20>; @@ -101,7 +97,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, - <&uart1_pins_cts_rts_a>; + pinctrl-0 = <&uart1_pg_pins>, + <&uart1_cts_rts_pg_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index a1a1eb64caeb..3d78169cdeed 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -82,8 +82,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -207,7 +205,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 541acb4d2b91..f3667268adde 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -117,21 +117,21 @@ vref-supply = <®_dcdc1>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <191011>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <391304>; }; - button@600 { + button-600 { label = "Home"; linux,code = <KEY_HOME>; channel = <0>; @@ -140,8 +140,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -161,22 +159,12 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ drive-strength = <40>; - /* eMMC is missing pull-ups */ - bias-pull-up; }; &ohci0 { status = "okay"; }; -&pio { - mmc0_cd_pin_sina33: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; @@ -278,7 +266,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index c1cc8f09dd9a..626152c30f50 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -131,14 +131,14 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; @@ -148,7 +148,7 @@ #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; @@ -186,32 +186,13 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: cma@4a000000 { - compatible = "shared-dma-pool"; - size = <0x6000000>; - alloc-ranges = <0x4a000000 0x6000000>; - reusable; - linux,cma-default; - }; - }; - sound: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sun8i-a33-audio"; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&link_codec>; simple-audio-card,bitclock-master = <&link_codec>; - simple-audio-card,mclk-fs = <512>; + simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = "Left DAC", "AIF1 Slot 0 Left", @@ -227,7 +208,7 @@ }; }; - soc@1c00000 { + soc { tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-a33-tcon"; reg = <0x01c0c000 0x1000>; @@ -269,7 +250,7 @@ }; }; - video-codec@01c0e000 { + video-codec@1c0e000 { compatible = "allwinner,sun8i-a33-video-engine"; reg = <0x01c0e000 0x1000>; clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, @@ -479,11 +460,17 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map2 { @@ -550,7 +537,7 @@ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - uart0_pins_b: uart0@1 { + uart0_pb_pins: uart0-pb-pins { pins = "PB0", "PB1"; function = "uart0"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 583a5a01642f..7d30d3e530fb 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -363,6 +363,24 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo1>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; +}; + &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index e5f0645e53a7..a5a9f5a0603e 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -394,6 +394,24 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dcdc1>; + vddio-supply = <®_sw>; + device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; +}; + &usbphy { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 1537ce148cc1..98e8cea26dbe 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -160,6 +160,7 @@ vmmc-supply = <®_dcdc1>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; + bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 5617dd387fd3..b099d2fbb5cd 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -187,11 +187,6 @@ status = "disabled"; }; - memory { - reg = <0x40000000 0x80000000>; - device_type = "memory"; - }; - cpu0_opp_table: opp_table0 { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts new file mode 100644 index 000000000000..2c952eacfef5 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@ces.com.tw> + * Copyright (C) 2018 Jonathan McDowell <noodles@earth.li> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "MapleBoard MP130"; + compatible = "mapleboard,mp130", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "mp130:orange:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "mp130:orange:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ + }; + + user { + label = "user"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "LINEIN", "Line In"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index b403e5d787cb..ac8438c2cff1 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -74,6 +74,10 @@ }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci3 { status = "okay"; }; @@ -119,6 +123,22 @@ }; }; +&r_i2c { + status = "okay"; + + reg_vdd_cpux: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + silergy,fixed-microvolt = <1200000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <200>; + regulator-boot-on; + regulator-always-on; + }; +}; + &usbphy { usb3_vbus-supply = <®_usb3_vbus>; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 3ecfabb10151..959d265e7254 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -47,19 +47,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000 1040000 1300000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@816000000 { + opp-816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000 1100000 1300000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1008000000 { + opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000 1200000 1300000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -119,24 +119,10 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - cma_pool: cma@4a000000 { - compatible = "shared-dma-pool"; - size = <0x6000000>; - alloc-ranges = <0x4a000000 0x6000000>; - reusable; - linux,cma-default; - }; - }; - soc { - system-control@1c00000 { + syscon: system-control@1c00000 { compatible = "allwinner,sun8i-h3-system-control"; - reg = <0x01c00000 0x30>; + reg = <0x01c00000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -156,7 +142,7 @@ }; }; - video-codec@01c0e000 { + video-codec@1c0e000 { compatible = "allwinner,sun8i-h3-video-engine"; reg = <0x01c0e000 0x1000>; clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, @@ -241,3 +227,7 @@ &pio { compatible = "allwinner,sun8i-h3-pinctrl"; }; + +&rtc { + compatible = "allwinner,sun8i-h3-rtc"; +}; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index c676940a96da..719ad769b837 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -70,7 +70,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -82,12 +82,8 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - &r_pio { - wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { + wifi_pwrseq_pin_q8: wifi-pwrseq-pins { pins = "PL6", "PL7", "PL11"; function = "gpio_in"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts index 0dbdb29a8fff..e1c75f7fa3ca 100644 --- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts @@ -91,6 +91,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -103,13 +105,13 @@ }; &cpu0_opp_table { - opp@1104000000 { + opp-1104000000 { opp-hz = /bits/ 64 <1104000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -124,30 +126,7 @@ status = "okay"; }; -/* This is the i2c bus exposed on the DSI connector for the touch panel */ -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "disabled"; -}; - -/* This is the i2c bus exposed on the GPIO header */ -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "disabled"; -}; - -/* This is the i2c bus exposed on the CSI connector to control the sensor */ -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "disabled"; -}; - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -156,7 +135,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -292,14 +271,26 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo1>; + vddio-supply = <®_aldo3>; + device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + }; }; &usb_otg { diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts index fc0658cfa319..32cf1ab33aab 100644 --- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts +++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts @@ -25,7 +25,7 @@ * PF can also be used for the SD card so PB is preferred. */ pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pf_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 472c03b7aeab..316998e9ec5d 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_parrot>; led1 { label = "parrot:led1:usr"; @@ -97,8 +95,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; /* @@ -111,14 +107,14 @@ vref-supply = <®_aldo3>; status = "okay"; - button@0 { + button-190 { label = "V+"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <190000>; }; - button@1 { + button-390 { label = "V-"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -128,8 +124,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>; vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */ bus-width = <4>; @@ -138,7 +132,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -158,7 +152,6 @@ &mmc2_8bit_pins { drive-strength = <40>; - bias-pull-up; }; &ohci0 { @@ -166,34 +159,11 @@ }; &pio { - mmc0_cd_pin_parrot: mmc0_cd_pin@0 { - pins = "PD14"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_parrot: led_pins@0 { - pins = "PE16", "PE17"; - function = "gpio_out"; - }; - - usb0_id_det: usb0_id_detect_pin@0 { + usb0_id_det: usb0-id-detect-pin { pins = "PD10"; function = "gpio_in"; bias-pull-up; }; - - usb1_vbus_pin_parrot: usb1_vbus_pin@0 { - pins = "PD12"; - function = "gpio_out"; - }; -}; - -&r_pio { - wifi_reset_pin_parrot: wifi_reset_pin@0 { - pins = "PL6"; - function = "gpio_out"; - }; }; &r_rsb { @@ -319,8 +289,6 @@ }; ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_parrot>; gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */ status = "okay"; }; @@ -331,7 +299,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 6f4c9ca5a3ee..89762dbefe42 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -61,6 +61,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -68,7 +69,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <20000>; + clock-output-names = "ext-osc32k"; }; }; @@ -313,17 +315,27 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; + rtc: rtc@1c20400 { + compatible = "allwinner,sun8i-r40-rtc", + "allwinner,sun8i-h3-rtc"; + reg = <0x01c20400 0x400>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k", "osc32k-out"; + clocks = <&osc32k>; + #clock-cells = <1>; + }; + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-r40-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 5e8a95af89b8..189e479eb95a 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -73,8 +73,6 @@ reg = <0x40>; interrupt-parent = <&pio>; interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin>; power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ /* Tablet dts must provide reg and compatible */ status = "disabled"; @@ -82,8 +80,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -91,18 +87,7 @@ }; &pio { - mmc0_cd_pin: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - bias-pull-up; - }; - - ts_power_pin: ts_power_pin@0 { - pins = "PH1"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH8"; function = "gpio_in"; bias-pull-up; diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts new file mode 100644 index 000000000000..6931aaab2382 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + * Copyright (C) 2018 Hao Zhang <hao5781286@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-r40.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "t3-cqa3t-bv3"; + compatible = "qihua,t3-cqa3t-bv3", "allwinner,sun8i-t3", + "allwinner,sun8i-r40"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; +}; + +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c0 { + status = "okay"; + + axp22x: pmic@34 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pg"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-dldo3"; +}; + +®_eldo3 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; + +&tcon_tv0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts index ad173605b1b8..db5cd0b8574b 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts @@ -66,28 +66,28 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <400000>; }; - button@600 { + button-600 { label = "Select"; linux,code = <KEY_SELECT>; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Start"; linux,code = <KEY_OK>; channel = <0>; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts index 387fc2aa546d..99c8cf7bb86c 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts @@ -78,8 +78,6 @@ }; &mmc0 { - pinctrl-0 = <&mmc0_pins_a>; - pinctrl-names = "default"; broken-cd; bus-width = <4>; vmmc-supply = <®_vcc3v3>; @@ -87,7 +85,7 @@ }; &uart0 { - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 443b083c6adc..21e1806ca509 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -192,6 +192,8 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -292,17 +294,17 @@ interrupt-controller; #interrupt-cells = <3>; - i2c0_pins: i2c0 { + i2c0_pins: i2c0-pins { pins = "PB6", "PB7"; function = "i2c0"; }; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -310,7 +312,7 @@ bias-pull-up; }; - mmc1_pins: mmc1 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -318,7 +320,7 @@ bias-pull-up; }; - spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts new file mode 100644 index 000000000000..a1154e6c7cb5 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2018 Icenowy Zheng <icenowy@aosc.io> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +/ { + model = "Lichee Pi Nano"; + compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pe_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi new file mode 100644 index 000000000000..6100d3b75f61 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2018 Icenowy Zheng <icenowy@aosc.io> + * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com> + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + clocks { + osc24M: clk-24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: clk-32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + cpus { + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram-controller@1c00000 { + compatible = "allwinner,suniv-f1c100s-system-control", + "allwinner,sun4i-a10-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_d: sram@10000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0 { + compatible = "allwinner,suniv-f1c100s-sram-d", + "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + + ccu: clock@1c20000 { + compatible = "allwinner,suniv-f1c100s-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + intc: interrupt-controller@1c20400 { + compatible = "allwinner,suniv-f1c100s-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@1c20800 { + compatible = "allwinner,suniv-f1c100s-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <38>, <39>, <40>; + clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + uart0_pe_pins: uart0-pe-pins { + pins = "PE0", "PE1"; + function = "uart0"; + }; + }; + + timer@1c20c00 { + compatible = "allwinner,suniv-f1c100s-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <13>; + clocks = <&osc24M>; + }; + + wdt: watchdog@1c20ca0 { + compatible = "allwinner,suniv-f1c100s-wdt", + "allwinner,sun4i-a10-wdt"; + reg = <0x01c20ca0 0x20>; + }; + + uart0: serial@1c25000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c25000 0x400>; + interrupts = <1>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 38>; + resets = <&ccu 24>; + status = "disabled"; + }; + + uart1: serial@1c25400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c25400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 39>; + resets = <&ccu 25>; + status = "disabled"; + }; + + uart2: serial@1c25800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c25800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 40>; + resets = <&ccu 26>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 4b1530ebe427..a4c757c0b741 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -86,6 +86,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -93,15 +94,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - iosc: internal-osc-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <16000000>; - clock-accuracy = <300000000>; - clock-output-names = "iosc"; + clock-accuracy = <50000>; + clock-output-names = "ext_osc32k"; }; }; @@ -152,12 +146,6 @@ }; }; - syscon: syscon@1c00000 { - compatible = "allwinner,sun8i-h3-system-controller", - "syscon"; - reg = <0x01c00000 0x1000>; - }; - dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; @@ -375,7 +363,7 @@ ccu: clock@1c20000 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -386,13 +374,20 @@ reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; + csi_pins: csi { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", + "PE11"; + function = "csi"; + }; + emac_rgmii_pins: emac0 { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", @@ -744,6 +739,21 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + csi: camera@1cb0000 { + compatible = "allwinner,sun8i-h3-csi", + "allwinner,sun6i-a31-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_pins>; + status = "disabled"; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun8i-h3-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"; @@ -789,17 +799,19 @@ }; rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + /* compatible is in per SoC .dtsi file */ + reg = <0x01f00000 0x400>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k", "osc32k-out", "iosc"; + clocks = <&osc32k>; + #clock-cells = <1>; }; r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>, - <&ccu 9>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; @@ -837,7 +849,7 @@ compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi index ddf4e722ea93..0d002f83a259 100644 --- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi @@ -121,7 +121,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi index 245d0bcde441..117198c52e1f 100644 --- a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi @@ -46,13 +46,13 @@ &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; }; &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -60,14 +60,14 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -77,6 +77,6 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 183c5acafb22..b113e47b2b2a 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -140,6 +140,18 @@ status = "disabled"; }; + vic@54340000 { + compatible = "nvidia,tegra124-vic"; + reg = <0x0 0x54340000 0x0 0x00040000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_VIC03>; + clock-names = "vic"; + resets = <&tegra_car 178>; + reset-names = "vic"; + + iommus = <&mc TEGRA_SWGROUP_VIC>; + }; + sor@54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 20869757d32f..dcad6d6128cf 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -632,6 +632,8 @@ memory-controller@7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_EMC>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index b73d594b6dcd..c2706cef0b8a 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -235,6 +235,16 @@ }; }; + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; + sd: sdhc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; @@ -246,6 +256,8 @@ clocks = <&mio_clk 0>; reset-names = "host", "bridge"; resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; @@ -263,6 +275,8 @@ clocks = <&mio_clk 1>; reset-names = "host", "bridge", "hw"; resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + dma-names = "rx-tx"; + dmas = <&dmac 6>; bus-width = <8>; cap-mmc-highspeed; cap-mmc-hw-reset; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 0beb606cf3c8..97d051ef4968 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -269,6 +269,16 @@ }; }; + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; + sd: sdhc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; @@ -280,6 +290,8 @@ clocks = <&mio_clk 0>; reset-names = "host", "bridge"; resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; @@ -297,6 +309,8 @@ clocks = <&mio_clk 1>; reset-names = "host", "bridge", "hw"; resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + dma-names = "rx-tx"; + dmas = <&dmac 5>; bus-width = <8>; cap-mmc-highspeed; cap-mmc-hw-reset; @@ -313,6 +327,8 @@ clocks = <&mio_clk 2>; reset-names = "host", "bridge"; resets = <&mio_rst 2>, <&mio_rst 5>; + dma-names = "rx-tx"; + dmas = <&dmac 6>; bus-width = <4>; cap-sd-highspeed; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 8d20e9548e39..06a049f6edf8 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -141,8 +141,10 @@ cooling-maps { map { trip = <&cpu_alert>; - cooling-device = <&cpu0 - THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index f7fcf6b45995..efce02768b6f 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -239,6 +239,16 @@ }; }; + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; + sd: sdhc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; @@ -250,6 +260,8 @@ clocks = <&mio_clk 0>; reset-names = "host", "bridge"; resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; @@ -267,6 +279,8 @@ clocks = <&mio_clk 1>; reset-names = "host", "bridge", "hw"; resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + dma-names = "rx-tx"; + dmas = <&dmac 6>; bus-width = <8>; cap-mmc-highspeed; cap-mmc-hw-reset; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 4488c8fe213a..a9569d15de41 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -43,11 +43,6 @@ bank-width = <4>; }; - v2m_video_ram: vram@2,00000000 { - compatible = "arm,vexpress-vram"; - reg = <2 0x00000000 0x00800000>; - }; - ethernet@2,02000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x02000000 0x10000>; @@ -223,13 +218,24 @@ v2m_i2c_dvi: i2c@160000 { compatible = "arm,versatile-i2c"; reg = <0x160000 0x1000>; - #address-cells = <1>; #size-cells = <0>; dvi-transmitter@39 { compatible = "sil,sii9022-tpi", "sil,sii9022"; reg = <0x39>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dvi_bridge_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; }; dvi-transmitter@60 { @@ -260,37 +266,16 @@ interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; - memory-region = <&v2m_video_ram>; - max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + /* 800x600 16bpp @36MHz works fine */ + max-memory-bandwidth = <54000000>; + memory-region = <&vram>; port { - v2m_clcd_pads: endpoint { - remote-endpoint = <&v2m_clcd_panel>; + clcd_pads: endpoint { + remote-endpoint = <&dvi_bridge_in>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - v2m_clcd_panel: endpoint { - remote-endpoint = <&v2m_clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 4db42f6326a3..fd42e1194179 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -43,11 +43,6 @@ bank-width = <4>; }; - v2m_video_ram: vram@3,00000000 { - compatible = "arm,vexpress-vram"; - reg = <3 0x00000000 0x00800000>; - }; - ethernet@3,02000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <3 0x02000000 0x10000>; @@ -223,13 +218,37 @@ v2m_i2c_dvi: i2c@16000 { compatible = "arm,versatile-i2c"; reg = <0x16000 0x1000>; - #address-cells = <1>; #size-cells = <0>; dvi-transmitter@39 { compatible = "sil,sii9022-tpi", "sil,sii9022"; reg = <0x39>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Both the core tile and the motherboard routes their output + * pads to this transmitter. The motherboard system controller + * can select one of them as input using a mux register in + * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is + * the only platform with this specific set-up. + */ + port@0 { + reg = <0>; + dvi_bridge_in_ct: endpoint { + remote-endpoint = <&clcd_pads_ct>; + }; + }; + port@1 { + reg = <1>; + dvi_bridge_in_mb: endpoint { + remote-endpoint = <&clcd_pads_mb>; + }; + }; + }; }; dvi-transmitter@60 { @@ -253,6 +272,7 @@ reg-shift = <2>; }; + clcd@1f000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; @@ -260,37 +280,16 @@ interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; - memory-region = <&v2m_video_ram>; - max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + /* 800x600 16bpp @36MHz works fine */ + max-memory-bandwidth = <54000000>; + memory-region = <&vram>; port { - v2m_clcd_pads: endpoint { - remote-endpoint = <&v2m_clcd_panel>; + clcd_pads_mb: endpoint { + remote-endpoint = <&dvi_bridge_in_mb>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - v2m_clcd_panel: endpoint { - remote-endpoint = <&v2m_clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 3971427a105b..0dc4277d5f8b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -53,6 +53,20 @@ reg = <0 0x80000000 0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Chipselect 2 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0 0x18000000 0 0x00800000>; + no-map; + }; + }; + hdlcd@2b000000 { compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index ac6b90e9d806..a2ccacd07f4f 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -104,6 +104,20 @@ reg = <0 0x80000000 0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Chipselect 2 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0 0x18000000 0 0x00800000>; + no-map; + }; + }; + wdt@2a490000 { compatible = "arm,sp805", "arm,primecell"; reg = <0 0x2a490000 0 0x1000>; @@ -393,10 +407,11 @@ clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etb_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -407,10 +422,11 @@ clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -421,11 +437,10 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator_out_port0: endpoint { @@ -439,12 +454,11 @@ remote-endpoint = <&tpiu_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel_out_port0>; }; }; @@ -457,40 +471,36 @@ clocks = <&oscclk6a>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel_out_port0: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel_in_port2: endpoint { - slave-mode; remote-endpoint = <&etm0_out_port>; }; }; @@ -500,7 +510,6 @@ port@4 { reg = <4>; funnel_in_port4: endpoint { - slave-mode; remote-endpoint = <&etm1_out_port>; }; }; @@ -508,7 +517,6 @@ port@5 { reg = <5>; funnel_in_port5: endpoint { - slave-mode; remote-endpoint = <&etm2_out_port>; }; }; @@ -522,9 +530,11 @@ cpu = <&cpu0>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; }; }; }; @@ -536,9 +546,11 @@ cpu = <&cpu1>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; }; }; }; @@ -550,9 +562,11 @@ cpu = <&cpu2>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port2>; + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port2>; + }; }; }; }; @@ -564,9 +578,11 @@ cpu = <&cpu3>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port4>; + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port4>; + }; }; }; }; @@ -578,9 +594,11 @@ cpu = <&cpu4>; clocks = <&oscclk6a>; clock-names = "apb_pclk"; - port { - etm2_out_port: endpoint { - remote-endpoint = <&funnel_in_port5>; + out-ports { + port { + etm2_out_port: endpoint { + remote-endpoint = <&funnel_in_port5>; + }; }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index e5b4a7570a01..d5b47d526f9e 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -55,6 +55,20 @@ reg = <0x80000000 0x40000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Chipselect 2 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0x18000000 0x00800000>; + no-map; + }; + }; + hdlcd@2a110000 { compatible = "arm,hdlcd"; reg = <0x2a110000 0x1000>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index fc43873cbdff..d796efaadbe3 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -69,6 +69,20 @@ reg = <0x60000000 0x40000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Chipselect 3 is physically at 0x4c000000 */ + vram: vram@4c000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0x4c000000 0x00800000>; + no-map; + }; + }; + clcd@10020000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x10020000 0x1000>; @@ -76,36 +90,15 @@ interrupts = <0 44 4>; clocks = <&oscclk1>, <&oscclk2>; clock-names = "clcdclk", "apb_pclk"; - max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + /* 1024x768 16bpp @65MHz */ + max-memory-bandwidth = <95000000>; port { - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; + clcd_pads_ct: endpoint { + remote-endpoint = <&dvi_bridge_in_ct>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <63500127>; - hactive = <1024>; - hback-porch = <152>; - hfront-porch = <48>; - hsync-len = <104>; - vactive = <768>; - vback-porch = <23>; - vfront-porch = <3>; - vsync-len = <4>; - }; - }; }; memory-controller@100e0000 { diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 2e7e3cebba1c..237b0246fa84 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -47,6 +47,7 @@ compatible = "toradex,vf610-colibri_vf50", "fsl,vf500"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index 76a0949df4a8..b0ec475017ad 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -10,7 +10,6 @@ #size-cells = <1>; chosen { }; aliases { }; - memory { device_type = "memory"; }; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts new file mode 100644 index 000000000000..689c8930dce3 --- /dev/null +++ b/arch/arm/boot/dts/vf610-bk4.dts @@ -0,0 +1,502 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "Liebherr BK4 controller"; + compatible = "lwn,bk4", "fsl,vf610"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x8000000>; + }; + + audio_ext: oscillator-audio { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + enet_ext: oscillator-ethernet { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + /* LED D5 */ + led0: heartbeat { + label = "heartbeat"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vcc_3v3_mcu: regulator-vcc3v3mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&clks { + clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; + clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; +}; + +&dspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi0>; + bus-num = <0>; + status = "okay"; + + spidev0@0 { + compatible = "lwn,bk4"; + spi-max-frequency = <30000000>; + reg = <0>; + fsl,spi-cs-sck-delay = <200>; + fsl,spi-sck-cs-delay = <400>; + }; +}; + +&dspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi3>; + bus-num = <3>; + status = "okay"; + spi-slave; + + slave@0 { + compatible = "lwn,bk4"; + spi-max-frequency = <30000000>; + reg = <0>; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec0 { + phy-mode = "rmii"; + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + clocks = <&clks VF610_CLK_ENET_50M>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec1 { + phy-mode = "rmii"; + phy-handle = <ðphy1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + clocks = <&clks VF610_CLK_ENET_50M>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + at24c256: eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + m41t62: rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + }; +}; + +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + status = "okay"; + + nand@0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <24>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + status = "okay"; + + n25q128a13_4: flash@0 { + compatible = "n25q128a13", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + reg = <0>; + }; + + n25q128a13_2: flash@1 { + compatible = "n25q128a13", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <2>; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* One_Wire_PSU_EN */ + VF610_PAD_PTC29__GPIO_102 0x1183 + /* SPI ENABLE */ + VF610_PAD_PTB26__GPIO_96 0x1183 + /* EB control */ + VF610_PAD_PTE14__GPIO_119 0x1183 + VF610_PAD_PTE4__GPIO_109 0x1181 + /* Feedback_Lines */ + VF610_PAD_PTC31__GPIO_104 0x1181 + VF610_PAD_PTA7__GPIO_134 0x1181 + VF610_PAD_PTD9__GPIO_88 0x1181 + VF610_PAD_PTE1__GPIO_106 0x1183 + VF610_PAD_PTB2__GPIO_24 0x1181 + VF610_PAD_PTB3__GPIO_25 0x1181 + VF610_PAD_PTB1__GPIO_23 0x1181 + /* SDHC Enable */ + VF610_PAD_PTE19__GPIO_124 0x1183 + /* SDHC Overcurrent */ + VF610_PAD_PTB23__GPIO_93 0x1181 + /* GPI */ + VF610_PAD_PTE2__GPIO_107 0x1181 + VF610_PAD_PTE3__GPIO_108 0x1181 + VF610_PAD_PTE5__GPIO_110 0x1181 + VF610_PAD_PTE6__GPIO_111 0x1181 + /* GPO */ + VF610_PAD_PTE0__GPIO_105 0x1183 + VF610_PAD_PTE7__GPIO_112 0x1183 + /* RS485 Control */ + VF610_PAD_PTB8__GPIO_30 0x1183 + VF610_PAD_PTB9__GPIO_31 0x1183 + VF610_PAD_PTE8__GPIO_113 0x1183 + /* MPBUS MPB_EN */ + VF610_PAD_PTE28__GPIO_133 0x1183 + /* MISC */ + VF610_PAD_PTE10__GPIO_115 0x1183 + VF610_PAD_PTE11__GPIO_116 0x1183 + VF610_PAD_PTE17__GPIO_122 0x1183 + VF610_PAD_PTC30__GPIO_103 0x1183 + VF610_PAD_PTB0__GPIO_22 0x1181 + /* RESETINFO */ + VF610_PAD_PTE26__GPIO_131 0x1183 + VF610_PAD_PTD6__GPIO_85 0x1181 + VF610_PAD_PTE27__GPIO_132 0x1181 + VF610_PAD_PTE13__GPIO_118 0x1181 + VF610_PAD_PTE21__GPIO_126 0x1181 + VF610_PAD_PTE22__GPIO_127 0x1181 + /* EE_5V_EN */ + VF610_PAD_PTE18__GPIO_123 0x1183 + /* EE_5V_OC_N */ + VF610_PAD_PTE25__GPIO_130 0x1181 + >; + }; + + pinctrl_can0: can0grp { + fsl,pins = < + VF610_PAD_PTB14__CAN0_RX 0x1181 + VF610_PAD_PTB15__CAN0_TX 0x1182 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + VF610_PAD_PTB16__CAN1_RX 0x1181 + VF610_PAD_PTB17__CAN1_TX 0x1182 + >; + }; + + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi3: dspi3grp { + fsl,pins = < + VF610_PAD_PTD10__DSPI3_CS0 0x1181 + VF610_PAD_PTD11__DSPI3_SIN 0x1181 + VF610_PAD_PTD12__DSPI3_SOUT 0x1182 + VF610_PAD_PTD13__DSPI3_SCK 0x1181 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30dd + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30de + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30dd + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30de + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30dd + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30dd + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30dd + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30dd + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30de + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30de + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30de + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + /* Heart bit LED */ + VF610_PAD_PTE12__GPIO_117 0x1183 + /* LEDS */ + VF610_PAD_PTE15__GPIO_120 0x1183 + VF610_PAD_PTA12__GPIO_5 0x1183 + VF610_PAD_PTA16__GPIO_6 0x1183 + VF610_PAD_PTE9__GPIO_114 0x1183 + VF610_PAD_PTE20__GPIO_125 0x1183 + VF610_PAD_PTE23__GPIO_128 0x1183 + VF610_PAD_PTE16__GPIO_121 0x1183 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x34df + VF610_PAD_PTA23__I2C2_SDA 0x34df + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD0__QSPI0_A_QSCK 0x397f + VF610_PAD_PTD1__QSPI0_A_CS0 0x397f + VF610_PAD_PTD2__QSPI0_A_DATA3 0x397f + VF610_PAD_PTD3__QSPI0_A_DATA2 0x397f + VF610_PAD_PTD4__QSPI0_A_DATA1 0x397f + VF610_PAD_PTD5__QSPI0_A_DATA0 0x397f + VF610_PAD_PTD7__QSPI0_B_QSCK 0x397f + VF610_PAD_PTD8__QSPI0_B_CS0 0x397f + VF610_PAD_PTD11__QSPI0_B_DATA1 0x397f + VF610_PAD_PTD12__QSPI0_B_DATA0 0x397f + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTB6__UART2_TX 0x21a2 + VF610_PAD_PTB7__UART2_RX 0x21a1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index aeaf99f1f0fc..05c9a39509b8 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -47,6 +47,7 @@ compatible = "toradex,vf610-colibri_vf61", "fsl,vf610"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index a3014e8d97a9..ea1b996a6bca 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -20,6 +20,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 59fceea8805d..dbb5ffcdcec4 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -14,6 +14,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index b76c3d0413df..7cdcc5fe8282 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -16,6 +16,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 5ae5abfe1d55..19eb4a849efb 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -50,6 +50,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts new file mode 100644 index 000000000000..de6dfa57bec5 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -0,0 +1,851 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright (C) 2016-2018 Zodiac Inflight Innovations + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SCU4 AIB"; + compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH + &gpio4 5 GPIO_ACTIVE_HIGH + &gpio3 30 GPIO_ACTIVE_HIGH + &gpio3 31 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "aib2main_1"; + }; + + port@2 { + reg = <2>; + label = "aib2main_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_5"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_6"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_4"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_7"; + }; + + port@7 { + reg = <7>; + label = "modem_pic"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + switch0port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port10 + &switch3port10 + &switch2port10>; + }; + }; + }; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + switch1: switch1@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 1>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "eth_cu_1000_3"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_100_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_100_3"; + }; + + switch1port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch3port10 + &switch2port10>; + }; + + switch1port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch0port10>; + }; + }; + }; + }; + + mdio_mux_4: mdio@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + switch2: switch2@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 2>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "internal_j9"; + }; + + port@2 { + reg = <2>; + label = "eth_fc_1000_2"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff1>; + }; + + port@3 { + reg = <3>; + label = "eth_fc_1000_3"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff2>; + }; + + port@4 { + reg = <4>; + label = "eth_fc_1000_4"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff3>; + }; + + port@5 { + reg = <5>; + label = "eth_fc_1000_5"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff4>; + }; + + port@6 { + reg = <6>; + label = "eth_fc_1000_6"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff5>; + }; + + port@7 { + reg = <7>; + label = "eth_fc_1000_7"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff6>; + }; + + port@9 { + reg = <9>; + label = "eth_fc_1000_1"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff0>; + }; + + switch2port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch3port9 + &switch1port9 + &switch0port10>; + }; + }; + }; + }; + + mdio_mux_8: mdio@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + + switch3: switch3@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 3>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "internal_j8"; + }; + + port@2 { + reg = <2>; + label = "eth_fc_1000_8"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff7>; + }; + + port@3 { + reg = <3>; + label = "eth_fc_1000_9"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff8>; + }; + + port@4 { + reg = <4>; + label = "eth_fc_1000_10"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff9>; + }; + + switch3port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch2port10>; + }; + + switch3port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port9 + &switch0port10>; + }; + }; + }; + }; + }; + + sff0: sff0 { + compatible = "sff,sff"; + i2c-bus = <&sff0_i2c>; + los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + }; + + sff1: sff1 { + compatible = "sff,sff"; + i2c-bus = <&sff1_i2c>; + los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + }; + + sff2: sff2 { + compatible = "sff,sff"; + i2c-bus = <&sff2_i2c>; + los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + }; + + sff3: sff3 { + compatible = "sff,sff"; + i2c-bus = <&sff3_i2c>; + los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + }; + + sff4: sff4 { + compatible = "sff,sff"; + i2c-bus = <&sff4_i2c>; + los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + }; + + sff5: sff5 { + compatible = "sff,sff"; + i2c-bus = <&sff5_i2c>; + los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>; + }; + + sff6: sff6 { + compatible = "sff,sff"; + i2c-bus = <&sff6_i2c>; + los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + }; + + sff7: sff7 { + compatible = "sff,sff"; + i2c-bus = <&sff7_i2c>; + los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + }; + + sff8: sff8 { + compatible = "sff,sff"; + i2c-bus = <&sff8_i2c>; + los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; + + sff9: sff9 { + compatible = "sff,sff"; + i2c-bus = <&sff9_i2c>; + los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dspi0 { + pinctrl-0 = <&pinctrl_dspi0>; + pinctrl-names = "default"; + bus-num = <0>; + status = "okay"; + + adc@5 { + compatible = "holt,hi8435"; + reg = <5>; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; + + spi-flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-1"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sd; + no-sdio; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + no-sdio; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio5: pca9554@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio6: pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + + ds1682@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + adt7411@4a { + compatible = "adi,adt7411"; + reg = <0x4a>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + gpio9: sx1503q@20 { + compatible = "semtech,sx1503q"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx1503_20>; + #gpio-cells = <2>; + reg = <0x20>; + gpio-controller; + }; + + lm75@4e { + compatible = "national,lm75"; + reg = <0x4e>; + }; + + lm75@4f { + compatible = "national,lm75"; + reg = <0x4f>; + }; + + gpio7: pca9555@23 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x23>; + }; + + adt7411@4a { + compatible = "adi,adt7411"; + reg = <0x4a>; + }; + + at24c08@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + }; + + tca9548@70 { + compatible = "nxp,pca9548"; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sff0_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + sff1_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + sff2_i2c: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + sff3_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + sff4_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + }; + + tca9548@71 { + compatible = "nxp,pca9548"; + pinctrl-names = "default"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + sff5_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + sff6_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + sff7_i2c: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + sff8_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + sff9_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + linux,rs485-enabled-at-boot-time; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + rs485-rts-delay = <0 200>; + status = "okay"; +}; + +&uart2 { + linux,rs485-enabled-at-boot-time; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + rs485-rts-delay = <0 200>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB13__DSPI0_CS4 0x1182 + VF610_PAD_PTB12__DSPI0_CS5 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_dspi2: dspi2gpio { + fsl,pins = < + VF610_PAD_PTD30__GPIO_64 0x33e2 + VF610_PAD_PTD29__GPIO_65 0x33e1 + VF610_PAD_PTD28__GPIO_66 0x33e2 + VF610_PAD_PTD27__GPIO_67 0x33e2 + VF610_PAD_PTD26__GPIO_68 0x31c2 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x37ff + VF610_PAD_PTA23__I2C2_SDA 0x37ff + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + VF610_PAD_PTA30__I2C3_SCL 0x37ff + VF610_PAD_PTA31__I2C3_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTB26__GPIO_96 0x31c2 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTE27__GPIO_132 0x31c2 + VF610_PAD_PTE28__GPIO_133 0x31c2 + VF610_PAD_PTE21__GPIO_126 0x31c2 + VF610_PAD_PTE22__GPIO_127 0x31c2 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 + VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff + VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + >; + }; + + pinctrl_sx1503_20: pinctrl-sx1503-20 { + fsl,pins = < + VF610_PAD_PTD31__GPIO_63 0x219d + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + VF610_PAD_PTB25__UART1_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */ + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index fe357668865b..757af56e8ee7 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -24,6 +24,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts index ca6249558760..d4bc0e3f2f11 100644 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -55,6 +55,7 @@ }; memory@8c000000 { + device_type = "memory"; reg = <0x8c000000 0x3000000>; }; }; diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi index 8293276b55a6..76bbfd5e32b6 100644 --- a/arch/arm/boot/dts/vf610m4.dtsi +++ b/arch/arm/boot/dts/vf610m4.dtsi @@ -50,7 +50,6 @@ #size-cells = <1>; chosen { }; aliases { }; - memory { device_type = "memory"; }; }; &mscm_ir { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index e22507e23303..ca6425ad794c 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -219,7 +219,7 @@ #size-cells = <0>; }; - sdhci0: sdhci@e0100000 { + sdhci0: mmc@e0100000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -229,7 +229,7 @@ reg = <0xe0100000 0x1000>; }; - sdhci1: sdhci@e0101000 { + sdhci1: mmc@e0101000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index 50c5e8b5be3d..e3ef1da26d5e 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -31,7 +31,7 @@ static void __init mmp_init_time(void) } static const char *const mmp2_dt_board_compat[] __initconst = { - "mrvl,mmp2-brownstone", + "mrvl,mmp2", NULL, }; |