Merge tag 'cris-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris

Pull CRIS changes from Jesper Nilsson:
 "Mostly another batch of code removal due to move to standard
  frameworks for CRISv32, initial devicetree configuration for a couple
  of boards, and some small fixes for kgdb and time handling"

* tag 'cris-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: Drop reference to get_cmos_time()
  CRIS: Drop code related to obsolete or unused kconfigs
  cris: time: Cleanup of persistent clock stuff
  cris: re-use helpers to dump data in hex format
  CRIS v32: remove old GPIO and LEDs code
  CRIS v32: remove I2C bitbanging driver
  CRIS v32: add ARTPEC-3 and P1343 device trees
  CRIS v32: dev88: add GPIO, LEDs, RTC, temp sensor
  CRIS: add dt-bindings symlink
  CRIS v32: increase NR_IRQS
  cris: arch-v10: kgdb: Add '__used' for static variable is_dyn_brkp
  cris: arch-v10: kgdb: Use BAR instead of DTP0 for register P12
  cris: kgdb: use native hex2bin

3 files changed, 1 insertions, 211 deletions

diff --git a/arch/cris/arch-v32/mach-fs/Kconfig b/arch/cris/arch-v32/mach-fs/Kconfig
index 774de82abef6..7d1ab972bc0f 100644
--- a/arch/cris/arch-v32/mach-fs/Kconfig
+++ b/arch/cris/arch-v32/mach-fs/Kconfig
@@ -192,25 +192,6 @@ config ETRAX_DEF_GIO_PE_OUT
 	  Configures the initial data for the general port E bits.  Most
 	  products should use 00000 here.
 
-config ETRAX_DEF_GIO_PV_OE
-	hex "GIO_PV_OE"
-	depends on ETRAX_VIRTUAL_GPIO
-	default "0000"
-	help
-	  Configures the direction of virtual general port V bits. 1 is out,
-	  0 is in. This is often totally different depending on the product
-	  used. These bits are used for all kinds of stuff. If you don't know
-	  what to use, it is always safe to put all as inputs, although
-	  floating inputs isn't good.
-
-config ETRAX_DEF_GIO_PV_OUT
-	hex "GIO_PV_OUT"
-	depends on ETRAX_VIRTUAL_GPIO
-	default "0000"
-	help
-	  Configures the initial data for the virtual general port V bits.
-	  Most products should use 0000 here.
-
 endmenu
 
 endif
diff --git a/arch/cris/arch-v32/mach-fs/Makefile b/arch/cris/arch-v32/mach-fs/Makefile
index 18a227196a41..0cc6eebacbed 100644
--- a/arch/cris/arch-v32/mach-fs/Makefile
+++ b/arch/cris/arch-v32/mach-fs/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y   := dma.o pinmux.o io.o arbiter.o
+obj-y   := dma.o pinmux.o arbiter.o
 
 clean:
 
diff --git a/arch/cris/arch-v32/mach-fs/io.c b/arch/cris/arch-v32/mach-fs/io.c
deleted file mode 100644
index a6958661fa8e..000000000000
--- a/arch/cris/arch-v32/mach-fs/io.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Helper functions for I/O pins.
- *
- * Copyright (c) 2004-2007 Axis Communications AB.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <mach/pinmux.h>
-#include <hwregs/gio_defs.h>
-
-#ifndef DEBUG
-#define DEBUG(x)
-#endif
-
-struct crisv32_ioport crisv32_ioports[] = {
-	{
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe),
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout),
-		(unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din),
-		8
-	},
-	{
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe),
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout),
-		(unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din),
-		18
-	},
-	{
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe),
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout),
-		(unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din),
-		18
-	},
-	{
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_oe),
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_dout),
-		(unsigned long *)REG_ADDR(gio, regi_gio, r_pd_din),
-		18
-	},
-	{
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_oe),
-		(unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_dout),
-		(unsigned long *)REG_ADDR(gio, regi_gio, r_pe_din),
-		18
-	}
-};
-
-#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
-
-struct crisv32_iopin crisv32_led_net0_green;
-struct crisv32_iopin crisv32_led_net0_red;
-struct crisv32_iopin crisv32_led_net1_green;
-struct crisv32_iopin crisv32_led_net1_red;
-struct crisv32_iopin crisv32_led2_green;
-struct crisv32_iopin crisv32_led2_red;
-struct crisv32_iopin crisv32_led3_green;
-struct crisv32_iopin crisv32_led3_red;
-
-/* Dummy port used when green LED and red LED is on the same bit */
-static unsigned long io_dummy;
-static struct crisv32_ioport dummy_port = {
-	&io_dummy,
-	&io_dummy,
-	&io_dummy,
-	18
-};
-static struct crisv32_iopin dummy_led = {
-	&dummy_port,
-	0
-};
-
-static int __init crisv32_io_init(void)
-{
-	int ret = 0;
-
-	u32 i;
-
-	/* Locks *should* be dynamically initialized. */
-	for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++)
-		spin_lock_init(&crisv32_ioports[i].lock);
-	spin_lock_init(&dummy_port.lock);
-
-	/* Initialize LEDs */
-#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
-	ret +=
-	    crisv32_io_get_name(&crisv32_led_net0_green,
-				CONFIG_ETRAX_LED_G_NET0);
-	crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out);
-	if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) {
-		ret +=
-		    crisv32_io_get_name(&crisv32_led_net0_red,
-					CONFIG_ETRAX_LED_R_NET0);
-		crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out);
-	} else
-		crisv32_led_net0_red = dummy_led;
-#endif
-
-#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO
-	ret +=
-	    crisv32_io_get_name(&crisv32_led_net1_green,
-				CONFIG_ETRAX_LED_G_NET1);
-	crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out);
-	if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) {
-		crisv32_io_get_name(&crisv32_led_net1_red,
-				    CONFIG_ETRAX_LED_R_NET1);
-		crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out);
-	} else
-		crisv32_led_net1_red = dummy_led;
-#endif
-
-	ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G);
-	ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R);
-	ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G);
-	ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R);
-
-	crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
-	crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
-	crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
-	crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
-
-	return ret;
-}
-
-__initcall(crisv32_io_init);
-
-int crisv32_io_get(struct crisv32_iopin *iopin,
-		   unsigned int port, unsigned int pin)
-{
-	if (port > NBR_OF_PORTS)
-		return -EINVAL;
-	if (port > crisv32_ioports[port].pin_count)
-		return -EINVAL;
-
-	iopin->bit = 1 << pin;
-	iopin->port = &crisv32_ioports[port];
-
-	/* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
-	/* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
-	if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio))
-		return -EIO;
-	DEBUG(printk(KERN_DEBUG "crisv32_io_get: Allocated pin %d on port %d\n",
-		pin, port));
-
-	return 0;
-}
-
-int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name)
-{
-	int port;
-	int pin;
-
-	if (toupper(*name) == 'P')
-		name++;
-
-	if (toupper(*name) < 'A' || toupper(*name) > 'E')
-		return -EINVAL;
-
-	port = toupper(*name) - 'A';
-	name++;
-	pin = simple_strtoul(name, NULL, 10);
-
-	if (pin < 0 || pin > crisv32_ioports[port].pin_count)
-		return -EINVAL;
-
-	iopin->bit = 1 << pin;
-	iopin->port = &crisv32_ioports[port];
-
-	/* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
-	/* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
-	if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio))
-		return -EIO;
-
-	DEBUG(printk(KERN_DEBUG
-		"crisv32_io_get_name: Allocated pin %d on port %d\n",
-		pin, port));
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-/* PCI I/O access stuff */
-struct cris_io_operations *cris_iops = NULL;
-EXPORT_SYMBOL(cris_iops);
-#endif