summaryrefslogtreecommitdiff
path: root/arch/ia64/include
diff options
context:
space:
mode:
authorChristoph Hellwig <hch@lst.de>2019-08-13 09:25:01 +0200
committerTony Luck <tony.luck@intel.com>2019-08-16 11:33:57 -0700
commitcf07cb1ff4ea008abf06c95878c700cf1dd65c3e (patch)
tree2f2f324bfe52f80bbfee2eeee90e5427ea9346b3 /arch/ia64/include
parentf7bc6e42bf12487182fc442a08eca25d968dc543 (diff)
ia64: remove support for the SGI SN2 platform
The SGI SN2 (early Altix) is a very non-standard IA64 platform that was at the very high end of even IA64 hardware, and has been discontinued a long time ago. Remove it because there no upstream users left, and it has magic hooks all over the kernel. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-16-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
Diffstat (limited to 'arch/ia64/include')
-rw-r--r--arch/ia64/include/asm/acpi.h2
-rw-r--r--arch/ia64/include/asm/irq.h3
-rw-r--r--arch/ia64/include/asm/machvec.h2
-rw-r--r--arch/ia64/include/asm/machvec_sn2.h114
-rw-r--r--arch/ia64/include/asm/mmzone.h2
-rw-r--r--arch/ia64/include/asm/sn/acpi.h15
-rw-r--r--arch/ia64/include/asm/sn/addrs.h299
-rw-r--r--arch/ia64/include/asm/sn/arch.h86
-rw-r--r--arch/ia64/include/asm/sn/bte.h236
-rw-r--r--arch/ia64/include/asm/sn/clksupport.h28
-rw-r--r--arch/ia64/include/asm/sn/geo.h132
-rw-r--r--arch/ia64/include/asm/sn/intr.h53
-rw-r--r--arch/ia64/include/asm/sn/io.h274
-rw-r--r--arch/ia64/include/asm/sn/ioc3.h242
-rw-r--r--arch/ia64/include/asm/sn/klconfig.h246
-rw-r--r--arch/ia64/include/asm/sn/l1.h51
-rw-r--r--arch/ia64/include/asm/sn/leds.h33
-rw-r--r--arch/ia64/include/asm/sn/module.h127
-rw-r--r--arch/ia64/include/asm/sn/mspec.h59
-rw-r--r--arch/ia64/include/asm/sn/nodepda.h82
-rw-r--r--arch/ia64/include/asm/sn/pcibr_provider.h150
-rw-r--r--arch/ia64/include/asm/sn/pcibus_provider_defs.h68
-rw-r--r--arch/ia64/include/asm/sn/pcidev.h85
-rw-r--r--arch/ia64/include/asm/sn/pda.h68
-rw-r--r--arch/ia64/include/asm/sn/pic.h261
-rw-r--r--arch/ia64/include/asm/sn/rw_mmr.h28
-rw-r--r--arch/ia64/include/asm/sn/shub_mmr.h502
-rw-r--r--arch/ia64/include/asm/sn/shubio.h3358
-rw-r--r--arch/ia64/include/asm/sn/simulator.h2
-rw-r--r--arch/ia64/include/asm/sn/sn2/sn_hwperf.h242
-rw-r--r--arch/ia64/include/asm/sn/sn_cpuid.h132
-rw-r--r--arch/ia64/include/asm/sn/sn_feature_sets.h58
-rw-r--r--arch/ia64/include/asm/sn/sn_sal.h1101
-rw-r--r--arch/ia64/include/asm/sn/tioca.h596
-rw-r--r--arch/ia64/include/asm/sn/tioca_provider.h207
-rw-r--r--arch/ia64/include/asm/sn/tioce.h760
-rw-r--r--arch/ia64/include/asm/sn/tioce_provider.h63
-rw-r--r--arch/ia64/include/asm/sn/tiocp.h257
-rw-r--r--arch/ia64/include/asm/sn/tiocx.h72
-rw-r--r--arch/ia64/include/asm/sn/types.h26
40 files changed, 3 insertions, 10119 deletions
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 0ea569040c5b..80c5ef8f475e 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -43,8 +43,6 @@ static inline const char *acpi_get_sysname (void)
return "hpzx1";
# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
return "hpzx1_swiotlb";
-# elif defined (CONFIG_IA64_SGI_SN2)
- return "sn2";
# elif defined (CONFIG_IA64_SGI_UV)
return "uv";
# elif defined (CONFIG_IA64_DIG)
diff --git a/arch/ia64/include/asm/irq.h b/arch/ia64/include/asm/irq.h
index 8b84a55ed38a..5acf52e90872 100644
--- a/arch/ia64/include/asm/irq.h
+++ b/arch/ia64/include/asm/irq.h
@@ -28,9 +28,6 @@ irq_canonicalize (int irq)
}
extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
-bool is_affinity_mask_valid(const struct cpumask *cpumask);
-
-#define is_affinity_mask_valid is_affinity_mask_valid
int create_irq(void);
void destroy_irq(unsigned int irq);
diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
index beae261fbcb4..d657f59d4fb3 100644
--- a/arch/ia64/include/asm/machvec.h
+++ b/arch/ia64/include/asm/machvec.h
@@ -101,8 +101,6 @@ extern void machvec_timer_interrupt (int, void *);
# include <asm/machvec_hpzx1.h>
# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
# include <asm/machvec_hpzx1_swiotlb.h>
-# elif defined (CONFIG_IA64_SGI_SN2)
-# include <asm/machvec_sn2.h>
# elif defined (CONFIG_IA64_SGI_UV)
# include <asm/machvec_uv.h>
# elif defined (CONFIG_IA64_GENERIC)
diff --git a/arch/ia64/include/asm/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h
deleted file mode 100644
index a243e4fb4877..000000000000
--- a/arch/ia64/include/asm/machvec_sn2.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (c) 2002-2003,2006 Silicon Graphics, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Further, this software is distributed without any warranty that it is
- * free of the rightful claim of any third person regarding infringement
- * or the like. Any license provided herein, whether implied or
- * otherwise, applies only to this software file. Patent licenses, if
- * any, provided herein do not apply to combinations of this program with
- * other software, or any other product whatsoever.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * For further information regarding this notice, see:
- *
- * http://oss.sgi.com/projects/GenInfo/NoticeExplan
- */
-
-#ifndef _ASM_IA64_MACHVEC_SN2_H
-#define _ASM_IA64_MACHVEC_SN2_H
-
-extern ia64_mv_setup_t sn_setup;
-extern ia64_mv_cpu_init_t sn_cpu_init;
-extern ia64_mv_irq_init_t sn_irq_init;
-extern ia64_mv_send_ipi_t sn2_send_IPI;
-extern ia64_mv_timer_interrupt_t sn_timer_interrupt;
-extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge;
-extern ia64_mv_irq_to_vector sn_irq_to_vector;
-extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq;
-extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem;
-extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read;
-extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write;
-extern ia64_mv_inb_t __sn_inb;
-extern ia64_mv_inw_t __sn_inw;
-extern ia64_mv_inl_t __sn_inl;
-extern ia64_mv_outb_t __sn_outb;
-extern ia64_mv_outw_t __sn_outw;
-extern ia64_mv_outl_t __sn_outl;
-extern ia64_mv_mmiowb_t __sn_mmiowb;
-extern ia64_mv_readb_t __sn_readb;
-extern ia64_mv_readw_t __sn_readw;
-extern ia64_mv_readl_t __sn_readl;
-extern ia64_mv_readq_t __sn_readq;
-extern ia64_mv_readb_t __sn_readb_relaxed;
-extern ia64_mv_readw_t __sn_readw_relaxed;
-extern ia64_mv_readl_t __sn_readl_relaxed;
-extern ia64_mv_readq_t __sn_readq_relaxed;
-extern ia64_mv_dma_init sn_dma_init;
-extern ia64_mv_migrate_t sn_migrate;
-extern ia64_mv_kernel_launch_event_t sn_kernel_launch_event;
-extern ia64_mv_setup_msi_irq_t sn_setup_msi_irq;
-extern ia64_mv_teardown_msi_irq_t sn_teardown_msi_irq;
-extern ia64_mv_pci_fixup_bus_t sn_pci_fixup_bus;
-
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure. When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define ia64_platform_name "sn2"
-#define platform_setup sn_setup
-#define platform_cpu_init sn_cpu_init
-#define platform_irq_init sn_irq_init
-#define platform_send_ipi sn2_send_IPI
-#define platform_timer_interrupt sn_timer_interrupt
-#define platform_global_tlb_purge sn2_global_tlb_purge
-#define platform_pci_fixup sn_pci_fixup
-#define platform_inb __sn_inb
-#define platform_inw __sn_inw
-#define platform_inl __sn_inl
-#define platform_outb __sn_outb
-#define platform_outw __sn_outw
-#define platform_outl __sn_outl
-#define platform_mmiowb __sn_mmiowb
-#define platform_readb __sn_readb
-#define platform_readw __sn_readw
-#define platform_readl __sn_readl
-#define platform_readq __sn_readq
-#define platform_readb_relaxed __sn_readb_relaxed
-#define platform_readw_relaxed __sn_readw_relaxed
-#define platform_readl_relaxed __sn_readl_relaxed
-#define platform_readq_relaxed __sn_readq_relaxed
-#define platform_irq_to_vector sn_irq_to_vector
-#define platform_local_vector_to_irq sn_local_vector_to_irq
-#define platform_pci_get_legacy_mem sn_pci_get_legacy_mem
-#define platform_pci_legacy_read sn_pci_legacy_read
-#define platform_pci_legacy_write sn_pci_legacy_write
-#define platform_dma_init sn_dma_init
-#define platform_migrate sn_migrate
-#define platform_kernel_launch_event sn_kernel_launch_event
-#ifdef CONFIG_PCI_MSI
-#define platform_setup_msi_irq sn_setup_msi_irq
-#define platform_teardown_msi_irq sn_teardown_msi_irq
-#else
-#define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL)
-#define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL)
-#endif
-#define platform_pci_fixup_bus sn_pci_fixup_bus
-
-#include <asm/sn/io.h>
-
-#endif /* _ASM_IA64_MACHVEC_SN2_H */
diff --git a/arch/ia64/include/asm/mmzone.h b/arch/ia64/include/asm/mmzone.h
index e0de61709cf1..0ceca5f9449c 100644
--- a/arch/ia64/include/asm/mmzone.h
+++ b/arch/ia64/include/asm/mmzone.h
@@ -30,7 +30,7 @@ static inline int pfn_to_nid(unsigned long pfn)
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)
-#else /* sn2 is the biggest case, so we use that if !DIG */
+#else
# define MAX_PHYSNODE_ID 2048
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
#endif
diff --git a/arch/ia64/include/asm/sn/acpi.h b/arch/ia64/include/asm/sn/acpi.h
deleted file mode 100644
index fd480db25565..000000000000
--- a/arch/ia64/include/asm/sn/acpi.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_ACPI_H
-#define _ASM_IA64_SN_ACPI_H
-
-extern int sn_acpi_rev;
-#define SN_ACPI_BASE_SUPPORT() (sn_acpi_rev >= 0x20101)
-
-#endif /* _ASM_IA64_SN_ACPI_H */
diff --git a/arch/ia64/include/asm/sn/addrs.h b/arch/ia64/include/asm/sn/addrs.h
deleted file mode 100644
index e715c794b186..000000000000
--- a/arch/ia64/include/asm/sn/addrs.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_ADDRS_H
-#define _ASM_IA64_SN_ADDRS_H
-
-#include <asm/percpu.h>
-#include <asm/sn/types.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/pda.h>
-
-/*
- * Memory/SHUB Address Format:
- * +-+---------+--+--------------+
- * |0| NASID |AS| NodeOffset |
- * +-+---------+--+--------------+
- *
- * NASID: (low NASID bit is 0) Memory and SHUB MMRs
- * AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
- * 00: Local Resources and MMR space
- * Top bit of NodeOffset
- * 0: Local resources space
- * node id:
- * 0: IA64/NT compatibility space
- * 2: Local MMR Space
- * 4: Local memory, regardless of local node id
- * 1: Global MMR space
- * 01: GET space.
- * 10: AMO space.
- * 11: Cacheable memory space.
- *
- * NodeOffset: byte offset
- *
- *
- * TIO address format:
- * +-+----------+--+--------------+
- * |0| NASID |AS| Nodeoffset |
- * +-+----------+--+--------------+
- *
- * NASID: (low NASID bit is 1) TIO
- * AS: 2-bit Chiplet Identifier
- * 00: TIO LB (Indicates TIO MMR access.)
- * 01: TIO ICE (indicates coretalk space access.)
- *
- * NodeOffset: top bit must be set.
- *
- *
- * Note that in both of the above address formats, the low
- * NASID bit indicates if the reference is to the SHUB or TIO MMRs.
- */
-
-
-/*
- * Define basic shift & mask constants for manipulating NASIDs and AS values.
- */
-#define NASID_BITMASK (sn_hub_info->nasid_bitmask)
-#define NASID_SHIFT (sn_hub_info->nasid_shift)
-#define AS_SHIFT (sn_hub_info->as_shift)
-#define AS_BITMASK 0x3UL
-
-#define NASID_MASK ((u64)NASID_BITMASK << NASID_SHIFT)
-#define AS_MASK ((u64)AS_BITMASK << AS_SHIFT)
-
-
-/*
- * AS values. These are the same on both SHUB1 & SHUB2.
- */
-#define AS_GET_VAL 1UL
-#define AS_AMO_VAL 2UL
-#define AS_CAC_VAL 3UL
-#define AS_GET_SPACE (AS_GET_VAL << AS_SHIFT)
-#define AS_AMO_SPACE (AS_AMO_VAL << AS_SHIFT)
-#define AS_CAC_SPACE (AS_CAC_VAL << AS_SHIFT)
-
-
-/*
- * Virtual Mode Local & Global MMR space.
- */
-#define SH1_LOCAL_MMR_OFFSET 0x8000000000UL
-#define SH2_LOCAL_MMR_OFFSET 0x0200000000UL
-#define LOCAL_MMR_OFFSET (is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
-#define LOCAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET)
-#define LOCAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET)
-
-#define SH1_GLOBAL_MMR_OFFSET 0x0800000000UL
-#define SH2_GLOBAL_MMR_OFFSET 0x0300000000UL
-#define GLOBAL_MMR_OFFSET (is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
-#define GLOBAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET)
-
-/*
- * Physical mode addresses
- */
-#define GLOBAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET)
-
-
-/*
- * Clear region & AS bits.
- */
-#define TO_PHYS_MASK (~(RGN_BITS | AS_MASK))
-
-
-/*
- * Misc NASID manipulation.
- */
-#define NASID_SPACE(n) ((u64)(n) << NASID_SHIFT)
-#define REMOTE_ADDR(n,a) (NASID_SPACE(n) | (a))
-#define NODE_OFFSET(x) ((x) & (NODE_ADDRSPACE_SIZE - 1))
-#define NODE_ADDRSPACE_SIZE (1UL << AS_SHIFT)
-#define NASID_GET(x) (int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
-#define LOCAL_MMR_ADDR(a) (LOCAL_MMR_SPACE | (a))
-#define GLOBAL_MMR_ADDR(n,a) (GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
-#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
-#define GLOBAL_CAC_ADDR(n,a) (CAC_BASE | REMOTE_ADDR(n,a))
-#define CHANGE_NASID(n,x) ((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
-#define IS_TIO_NASID(n) ((n) & 1)
-
-
-/* non-II mmr's start at top of big window space (4G) */
-#define BWIN_TOP 0x0000000100000000UL
-
-/*
- * general address defines
- */
-#define CAC_BASE (PAGE_OFFSET | AS_CAC_SPACE)
-#define AMO_BASE (__IA64_UNCACHED_OFFSET | AS_AMO_SPACE)
-#define AMO_PHYS_BASE (RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE)
-#define GET_BASE (PAGE_OFFSET | AS_GET_SPACE)
-
-/*
- * Convert Memory addresses between various addressing modes.
- */
-#define TO_PHYS(x) (TO_PHYS_MASK & (x))
-#define TO_CAC(x) (CAC_BASE | TO_PHYS(x))
-#ifdef CONFIG_SGI_SN
-#define TO_AMO(x) (AMO_BASE | TO_PHYS(x))
-#define TO_GET(x) (GET_BASE | TO_PHYS(x))
-#else
-#define TO_AMO(x) ({ BUG(); x; })
-#define TO_GET(x) ({ BUG(); x; })
-#endif
-
-/*
- * Covert from processor physical address to II/TIO physical address:
- * II - squeeze out the AS bits
- * TIO- requires a chiplet id in bits 38-39. For DMA to memory,
- * the chiplet id is zero. If we implement TIO-TIO dma, we might need
- * to insert a chiplet id into this macro. However, it is our belief
- * right now that this chiplet id will be ICE, which is also zero.
- */
-#define SH1_TIO_PHYS_TO_DMA(x) \
- ((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x))
-
-#define SH2_NETWORK_BANK_OFFSET(x) \
- ((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1))
-
-#define SH2_NETWORK_BANK_SELECT(x) \
- ((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4))) \
- >> (sn_hub_info->nasid_shift - 4)) << 36)
-
-#define SH2_NETWORK_ADDRESS(x) \
- (SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x))
-
-#define SH2_TIO_PHYS_TO_DMA(x) \
- (((u64)(NASID_GET(x)) << 40) | SH2_NETWORK_ADDRESS(x))
-
-#define PHYS_TO_TIODMA(x) \
- (is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x))
-
-#define PHYS_TO_DMA(x) \
- ((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
-
-
-/*
- * Macros to test for address type.
- */
-#define IS_AMO_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE)
-#define IS_AMO_PHYS_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE)
-
-
-/*
- * The following definitions pertain to the IO special address
- * space. They define the location of the big and little windows
- * of any given node.
- */
-#define BWIN_SIZE_BITS 29 /* big window size: 512M */
-#define TIO_BWIN_SIZE_BITS 30 /* big window size: 1G */
-#define NODE_SWIN_BASE(n, w) ((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
- : RAW_NODE_SWIN_BASE(n, w))
-#define TIO_SWIN_BASE(n, w) (TIO_IO_BASE(n) + \
- ((u64) (w) << TIO_SWIN_SIZE_BITS))
-#define NODE_IO_BASE(n) (GLOBAL_MMR_SPACE | NASID_SPACE(n))
-#define TIO_IO_BASE(n) (__IA64_UNCACHED_OFFSET | NASID_SPACE(n))
-#define BWIN_SIZE (1UL << BWIN_SIZE_BITS)
-#define NODE_BWIN_BASE0(n) (NODE_IO_BASE(n) + BWIN_SIZE)
-#define NODE_BWIN_BASE(n, w) (NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
-#define RAW_NODE_SWIN_BASE(n, w) (NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
-#define BWIN_WIDGET_MASK 0x7
-#define BWIN_WINDOWNUM(x) (((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
-#define SH1_IS_BIG_WINDOW_ADDR(x) ((x) & BWIN_TOP)
-
-#define TIO_BWIN_WINDOW_SELECT_MASK 0x7
-#define TIO_BWIN_WINDOWNUM(x) (((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
-
-#define TIO_HWIN_SHIFT_BITS 33
-#define TIO_HWIN(x) (NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS)
-
-/*
- * The following definitions pertain to the IO special address
- * space. They define the location of the big and little windows
- * of any given node.
- */
-
-#define SWIN_SIZE_BITS 24
-#define SWIN_WIDGET_MASK 0xF
-
-#define TIO_SWIN_SIZE_BITS 28
-#define TIO_SWIN_SIZE (1UL << TIO_SWIN_SIZE_BITS)
-#define TIO_SWIN_WIDGET_MASK 0x3
-
-/*
- * Convert smallwindow address to xtalk address.
- *
- * 'addr' can be physical or virtual address, but will be converted
- * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
- */
-#define SWIN_WIDGETNUM(x) (((x) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
-#define TIO_SWIN_WIDGETNUM(x) (((x) >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
-
-
-/*
- * The following macros produce the correct base virtual address for
- * the hub registers. The REMOTE_HUB_* macro produce
- * the address for the specified hub's registers. The intent is
- * that the appropriate PI, MD, NI, or II register would be substituted
- * for x.
- *
- * WARNING:
- * When certain Hub chip workaround are defined, it's not sufficient
- * to dereference the *_HUB_ADDR() macros. You should instead use
- * HUB_L() and HUB_S() if you must deal with pointers to hub registers.
- * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
- * They're always safe.
- */
-/* Shub1 TIO & MMR addressing macros */
-#define SH1_TIO_IOSPACE_ADDR(n,x) \
- GLOBAL_MMR_ADDR(n,x)
-
-#define SH1_REMOTE_BWIN_MMR(n,x) \
- GLOBAL_MMR_ADDR(n,x)
-
-#define SH1_REMOTE_SWIN_MMR(n,x) \
- (NODE_SWIN_BASE(n,1) + 0x800000UL + (x))
-
-#define SH1_REMOTE_MMR(n,x) \
- (SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) : \
- SH1_REMOTE_SWIN_MMR(n,x))
-
-/* Shub1 TIO & MMR addressing macros */
-#define SH2_TIO_IOSPACE_ADDR(n,x) \
- ((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2)))
-
-#define SH2_REMOTE_MMR(n,x) \
- GLOBAL_MMR_ADDR(n,x)
-
-
-/* TIO & MMR addressing macros that work on both shub1 & shub2 */
-#define TIO_IOSPACE_ADDR(n,x) \
- ((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) : \
- SH2_TIO_IOSPACE_ADDR(n,x)))
-
-#define SH_REMOTE_MMR(n,x) \
- (is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x))
-
-#define REMOTE_HUB_ADDR(n,x) \
- (IS_TIO_NASID(n) ? ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) : \
- ((volatile u64*)SH_REMOTE_MMR(n,x)))
-
-
-#define HUB_L(x) (*((volatile typeof(*x) *)x))
-#define HUB_S(x,d) (*((volatile typeof(*x) *)x) = (d))
-
-#define REMOTE_HUB_L(n, a) HUB_L(REMOTE_HUB_ADDR((n), (a)))
-#define REMOTE_HUB_S(n, a, d) HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
-
-/*
- * Coretalk address breakdown
- */
-#define CTALK_NASID_SHFT 40
-#define CTALK_NASID_MASK (0x3FFFULL << CTALK_NASID_SHFT)
-#define CTALK_CID_SHFT 38
-#define CTALK_CID_MASK (0x3ULL << CTALK_CID_SHFT)
-#define CTALK_NODE_OFFSET 0x3FFFFFFFFF
-
-#endif /* _ASM_IA64_SN_ADDRS_H */
diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h
deleted file mode 100644
index 31eb784866f8..000000000000
--- a/arch/ia64/include/asm/sn/arch.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI specific setup.
- *
- * Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
- * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
- */
-#ifndef _ASM_IA64_SN_ARCH_H
-#define _ASM_IA64_SN_ARCH_H
-
-#include <linux/numa.h>
-#include <asm/types.h>
-#include <asm/percpu.h>
-#include <asm/sn/types.h>
-#include <asm/sn/sn_cpuid.h>
-
-/*
- * This is the maximum number of NUMALINK nodes that can be part of a single
- * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in
- * remote partitions are NOT included in this number.
- * The number of compact nodes cannot exceed size of a coherency domain.
- * The purpose of this define is to specify a node count that includes
- * all C/M/TIO nodes in an SSI system.
- *
- * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes.
- *
- * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade
- * to ACPI3.0, this limit will be removed. The notion of "compact nodes"
- * should be deleted and TIOs should be included in MAX_NUMNODES.
- */
-#define MAX_TIO_NODES MAX_NUMNODES
-#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES)
-
-/*
- * Maximum number of nodes in all partitions and in all coherency domains.
- * This is the total number of nodes accessible in the numalink fabric. It
- * includes all C & M bricks, plus all TIOs.
- *
- * This value is also the value of the maximum number of NASIDs in the numalink
- * fabric.
- */
-#define MAX_NUMALINK_NODES 16384
-
-/*
- * The following defines attributes of the HUB chip. These attributes are
- * frequently referenced. They are kept in the per-cpu data areas of each cpu.
- * They are kept together in a struct to minimize cache misses.
- */
-struct sn_hub_info_s {
- u8 shub2;
- u8 nasid_shift;
- u8 as_shift;
- u8 shub_1_1_found;
- u16 nasid_bitmask;
-};
-DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
-#define sn_hub_info this_cpu_ptr(&__sn_hub_info)
-#define is_shub2() (sn_hub_info->shub2)
-#define is_shub1() (sn_hub_info->shub2 == 0)
-
-/*
- * Use this macro to test if shub 1.1 wars should be enabled
- */
-#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found)
-
-
-/*
- * Compact node ID to nasid mappings kept in the per-cpu data areas of each
- * cpu.
- */
-DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
-#define sn_cnodeid_to_nasid this_cpu_ptr(&__sn_cnodeid_to_nasid[0])
-
-
-extern u8 sn_partition_id;
-extern u8 sn_system_size;
-extern u8 sn_sharing_domain_size;
-extern u8 sn_region_size;
-
-extern void sn_flush_all_caches(long addr, long bytes);
-extern bool sn_cpu_disable_allowed(int cpu);
-
-#endif /* _ASM_IA64_SN_ARCH_H */
diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h
deleted file mode 100644
index cd71ab5faf62..000000000000
--- a/arch/ia64/include/asm/sn/bte.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-
-#ifndef _ASM_IA64_SN_BTE_H
-#define _ASM_IA64_SN_BTE_H
-
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/types.h>
-#include <asm/sn/shub_mmr.h>
-
-struct nodepda_s;
-
-#define IBCT_NOTIFY (0x1UL << 4)
-#define IBCT_ZFIL_MODE (0x1UL << 0)
-
-/* #define BTE_DEBUG */
-/* #define BTE_DEBUG_VERBOSE */
-
-#ifdef BTE_DEBUG
-# define BTE_PRINTK(x) printk x /* Terse */
-# ifdef BTE_DEBUG_VERBOSE
-# define BTE_PRINTKV(x) printk x /* Verbose */
-# else
-# define BTE_PRINTKV(x)
-# endif /* BTE_DEBUG_VERBOSE */
-#else
-# define BTE_PRINTK(x)
-# define BTE_PRINTKV(x)
-#endif /* BTE_DEBUG */
-
-
-/* BTE status register only supports 16 bits for length field */
-#define BTE_LEN_BITS (16)
-#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
-#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT)
-
-
-/* Define hardware */
-#define BTES_PER_NODE (is_shub2() ? 4 : 2)
-#define MAX_BTES_PER_NODE 4
-
-#define BTE2OFF_CTRL 0
-#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0)
-#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0)
-#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0)
-
-#define BTE_BASE_ADDR(interface) \
- (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \
- (interface == 1) ? SH2_BT_ENG_CSR_1 : \
- (interface == 2) ? SH2_BT_ENG_CSR_2 : \
- SH2_BT_ENG_CSR_3 \
- : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1)
-
-#define BTE_SOURCE_ADDR(base) \
- (is_shub2() ? base + (BTE2OFF_SRC/8) \
- : base + (BTEOFF_SRC/8))
-
-#define BTE_DEST_ADDR(base) \
- (is_shub2() ? base + (BTE2OFF_DEST/8) \
- : base + (BTEOFF_DEST/8))
-
-#define BTE_CTRL_ADDR(base) \
- (is_shub2() ? base + (BTE2OFF_CTRL/8) \
- : base + (BTEOFF_CTRL/8))
-
-#define BTE_NOTIF_ADDR(base) \
- (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \
- : base + (BTEOFF_NOTIFY/8))
-
-/* Define hardware modes */
-#define BTE_NOTIFY IBCT_NOTIFY
-#define BTE_NORMAL BTE_NOTIFY
-#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
-/* Use a reserved bit to let the caller specify a wait for any BTE */
-#define BTE_WACQUIRE 0x4000
-/* Use the BTE on the node with the destination memory */
-#define BTE_USE_DEST (BTE_WACQUIRE << 1)
-/* Use any available BTE interface on any node for the transfer */
-#define BTE_USE_ANY (BTE_USE_DEST << 1)
-/* macro to force the IBCT0 value valid */
-#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
-
-#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR)
-#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1)
-#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE)
-
-/*
- * Some macros to simplify reading.
- * Start with macros to locate the BTE control registers.
- */
-#define BTE_LNSTAT_LOAD(_bte) \
- HUB_L(_bte->bte_base_addr)
-#define BTE_LNSTAT_STORE(_bte, _x) \
- HUB_S(_bte->bte_base_addr, (_x))
-#define BTE_SRC_STORE(_bte, _x) \
-({ \
- u64 __addr = ((_x) & ~AS_MASK); \
- if (is_shub2()) \
- __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
- HUB_S(_bte->bte_source_addr, __addr); \
-})
-#define BTE_DEST_STORE(_bte, _x) \
-({ \
- u64 __addr = ((_x) & ~AS_MASK); \
- if (is_shub2()) \
- __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
- HUB_S(_bte->bte_destination_addr, __addr); \
-})
-#define BTE_CTRL_STORE(_bte, _x) \
- HUB_S(_bte->bte_control_addr, (_x))
-#define BTE_NOTIF_STORE(_bte, _x) \
-({ \
- u64 __addr = ia64_tpa((_x) & ~AS_MASK); \
- if (is_shub2()) \
- __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
- HUB_S(_bte->bte_notify_addr, __addr); \
-})
-
-#define BTE_START_TRANSFER(_bte, _len, _mode) \
- is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \
- : BTE_LNSTAT_STORE(_bte, _len); \
- BTE_CTRL_STORE(_bte, _mode)
-
-/* Possible results from bte_copy and bte_unaligned_copy */
-/* The following error codes map into the BTE hardware codes
- * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
- * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
- * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
- * codes to give the following error codes.
- */
-#define BTEFAIL_OFFSET 1
-
-typedef enum {
- BTE_SUCCESS, /* 0 is success */
- BTEFAIL_DIR, /* Directory error due to IIO access*/
- BTEFAIL_POISON, /* poison error on IO access (write to poison page) */
- BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */
- BTEFAIL_ACCESS, /* access error (protection violation) */
- BTEFAIL_PWERR, /* Partial Write Error */
- BTEFAIL_PRERR, /* Partial Read Error */
- BTEFAIL_TOUT, /* CRB Time out */
- BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */
- BTEFAIL_NOTAVAIL, /* BTE not available */
-} bte_result_t;
-
-#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */
-#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */
-#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */
-#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */
-#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */
-#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */
-#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */
-
-#define BTE_ERR_BITS 0x3FUL
-#define BTE_ERR_SHIFT 36
-#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT)
-
-#define BTE_ERROR_RETRY(value) \
- (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \
- : (value != BTEFAIL_TOUT))
-
-/*
- * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2()
- */
-#define BTE_SHUB2_ERROR(_status) \
- ((_status & BTE_ERR_MASK) \
- ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \
- : _status)
-
-#define BTE_GET_ERROR_STATUS(_status) \
- (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR)
-
-#define BTE_VALID_SH2_ERROR(value) \
- ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL))
-
-/*
- * Structure defining a bte. An instance of this
- * structure is created in the nodepda for each
- * bte on that node (as defined by BTES_PER_NODE)
- * This structure contains everything necessary
- * to work with a BTE.
- */
-struct bteinfo_s {
- volatile u64 notify ____cacheline_aligned;
- u64 *bte_base_addr ____cacheline_aligned;
- u64 *bte_source_addr;
- u64 *bte_destination_addr;
- u64 *bte_control_addr;
- u64 *bte_notify_addr;
- spinlock_t spinlock;
- cnodeid_t bte_cnode; /* cnode */
- int bte_error_count; /* Number of errors encountered */
- int bte_num; /* 0 --> BTE0, 1 --> BTE1 */
- int cleanup_active; /* Interface is locked for cleanup */
- volatile bte_result_t bh_error; /* error while processing */
- volatile u64 *most_rcnt_na;
- struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE];
-};
-
-
-/*
- * Function prototypes (functions defined in bte.c, used elsewhere)
- */
-extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
-extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
-extern void bte_error_handler(struct nodepda_s *);
-
-#define bte_zero(dest, len, mode, notification) \
- bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
-
-/*
- * The following is the preferred way of calling bte_unaligned_copy
- * If the copy is fully cache line aligned, then bte_copy is
- * used instead. Since bte_copy is inlined, this saves a call
- * stack. NOTE: bte_copy is called synchronously and does block
- * until the transfer is complete. In order to get the asynch
- * version of bte_copy, you must perform this check yourself.
- */
-#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
- (((len & (L1_CACHE_BYTES - 1)) || \
- (src & (L1_CACHE_BYTES - 1)) || \
- (dest & (L1_CACHE_BYTES - 1))) ? \
- bte_unaligned_copy(src, dest, len, mode) : \
- bte_copy(src, dest, len, mode, NULL))
-
-
-#endif /* _ASM_IA64_SN_BTE_H */
diff --git a/arch/ia64/include/asm/sn/clksupport.h b/arch/ia64/include/asm/sn/clksupport.h
deleted file mode 100644
index d340c365a824..000000000000
--- a/arch/ia64/include/asm/sn/clksupport.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-/*
- * This file contains definitions for accessing a platform supported high resolution
- * clock. The clock is monitonically increasing and can be accessed from any node
- * in the system. The clock is synchronized across nodes - all nodes see the
- * same value.
- *
- * RTC_COUNTER_ADDR - contains the address of the counter
- *
- */
-
-#ifndef _ASM_IA64_SN_CLKSUPPORT_H
-#define _ASM_IA64_SN_CLKSUPPORT_H
-
-extern unsigned long sn_rtc_cycles_per_second;
-
-#define RTC_COUNTER_ADDR ((long *)LOCAL_MMR_ADDR(SH_RTC))
-
-#define rtc_time() (*RTC_COUNTER_ADDR)
-
-#endif /* _ASM_IA64_SN_CLKSUPPORT_H */
diff --git a/arch/ia64/include/asm/sn/geo.h b/arch/ia64/include/asm/sn/geo.h
deleted file mode 100644
index f083c9434066..000000000000
--- a/arch/ia64/include/asm/sn/geo.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_GEO_H
-#define _ASM_IA64_SN_GEO_H
-
-/* The geoid_t implementation below is based loosely on the pcfg_t
- implementation in sys/SN/promcfg.h. */
-
-/* Type declaractions */
-
-/* Size of a geoid_t structure (must be before decl. of geoid_u) */
-#define GEOID_SIZE 8 /* Would 16 be better? The size can
- be different on different platforms. */
-
-#define MAX_SLOTS 0xf /* slots per module */
-#define MAX_SLABS 0xf /* slabs per slot */
-
-typedef unsigned char geo_type_t;
-
-/* Fields common to all substructures */
-typedef struct geo_common_s {
- moduleid_t module; /* The module (box) this h/w lives in */
- geo_type_t type; /* What type of h/w is named by this geoid_t */
- slabid_t slab:4; /* slab (ASIC), 0 .. 15 within slot */
- slotid_t slot:4; /* slot (Blade), 0 .. 15 within module */
-} geo_common_t;
-
-/* Additional fields for particular types of hardware */
-typedef struct geo_node_s {
- geo_common_t common; /* No additional fields needed */
-} geo_node_t;
-
-typedef struct geo_rtr_s {
- geo_common_t common; /* No additional fields needed */
-} geo_rtr_t;
-
-typedef struct geo_iocntl_s {
- geo_common_t common; /* No additional fields needed */
-} geo_iocntl_t;
-
-typedef struct geo_pcicard_s {
- geo_iocntl_t common;
- char bus; /* Bus/widget number */
- char slot; /* PCI slot number */
-} geo_pcicard_t;
-
-/* Subcomponents of a node */
-typedef struct geo_cpu_s {
- geo_node_t node;
- char slice; /* Which CPU on the node */
-} geo_cpu_t;
-
-typedef struct geo_mem_s {
- geo_node_t node;
- char membus; /* The memory bus on the node */
- char memslot; /* The memory slot on the bus */
-} geo_mem_t;
-
-
-typedef union geoid_u {
- geo_common_t common;
- geo_node_t node;
- geo_iocntl_t iocntl;
- geo_pcicard_t pcicard;
- geo_rtr_t rtr;
- geo_cpu_t cpu;
- geo_mem_t mem;
- char padsize[GEOID_SIZE];
-} geoid_t;
-
-
-/* Preprocessor macros */
-
-#define GEO_MAX_LEN 48 /* max. formatted length, plus some pad:
- module/001c07/slab/5/node/memory/2/slot/4 */
-
-/* Values for geo_type_t */
-#define GEO_TYPE_INVALID 0
-#define GEO_TYPE_MODULE 1
-#define GEO_TYPE_NODE 2
-#define GEO_TYPE_RTR 3
-#define GEO_TYPE_IOCNTL 4
-#define GEO_TYPE_IOCARD 5
-#define GEO_TYPE_CPU 6
-#define GEO_TYPE_MEM 7
-#define GEO_TYPE_MAX (GEO_TYPE_MEM+1)
-
-/* Parameter for hwcfg_format_geoid_compt() */
-#define GEO_COMPT_MODULE 1
-#define GEO_COMPT_SLAB 2
-#define GEO_COMPT_IOBUS 3
-#define GEO_COMPT_IOSLOT 4
-#define GEO_COMPT_CPU 5
-#define GEO_COMPT_MEMBUS 6
-#define GEO_COMPT_MEMSLOT 7
-
-#define GEO_INVALID_STR "<invalid>"
-
-#define INVALID_NASID ((nasid_t)-1)
-#define INVALID_CNODEID ((cnodeid_t)-1)
-#define INVALID_PNODEID ((pnodeid_t)-1)
-#define INVALID_SLAB (slabid_t)-1
-#define INVALID_SLOT (slotid_t)-1
-#define INVALID_MODULE ((moduleid_t)-1)
-
-static inline slabid_t geo_slab(geoid_t g)
-{
- return (g.common.type == GEO_TYPE_INVALID) ?
- INVALID_SLAB : g.common.slab;
-}
-
-static inline slotid_t geo_slot(geoid_t g)
-{
- return (g.common.type == GEO_TYPE_INVALID) ?
- INVALID_SLOT : g.common.slot;
-}
-
-static inline moduleid_t geo_module(geoid_t g)
-{
- return (g.common.type == GEO_TYPE_INVALID) ?
- INVALID_MODULE : g.common.module;
-}
-
-extern geoid_t cnodeid_get_geoid(cnodeid_t cnode);
-
-#endif /* _ASM_IA64_SN_GEO_H */
diff --git a/arch/ia64/include/asm/sn/intr.h b/arch/ia64/include/asm/sn/intr.h
index e0487aa97418..3885a77b21df 100644
--- a/arch/ia64/include/asm/sn/intr.h
+++ b/arch/ia64/include/asm/sn/intr.h
@@ -9,60 +9,7 @@
#ifndef _ASM_IA64_SN_INTR_H
#define _ASM_IA64_SN_INTR_H
-#include <linux/rcupdate.h>
-#include <asm/sn/types.h>
-
-#define SGI_UART_VECTOR 0xe9
-
-/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
#define SGI_XPC_ACTIVATE 0x30
-#define SGI_II_ERROR 0x31
-#define SGI_XBOW_ERROR 0x32
-#define SGI_PCIASIC_ERROR 0x33
-#define SGI_ACPI_SCI_INT 0x34
-#define SGI_TIOCA_ERROR 0x35
-#define SGI_TIO_ERROR 0x36
-#define SGI_TIOCX_ERROR 0x37
-#define SGI_MMTIMER_VECTOR 0x38
#define SGI_XPC_NOTIFY 0xe7
-#define IA64_SN2_FIRST_DEVICE_VECTOR 0x3c
-#define IA64_SN2_LAST_DEVICE_VECTOR 0xe6
-
-#define SN2_IRQ_RESERVED 0x1
-#define SN2_IRQ_CONNECTED 0x2
-#define SN2_IRQ_SHARED 0x4
-
-// The SN PROM irq struct
-struct sn_irq_info {
- struct sn_irq_info *irq_next; /* deprecated DO NOT USE */
- short irq_nasid; /* Nasid IRQ is assigned to */
- int irq_slice; /* slice IRQ is assigned to */
- int irq_cpuid; /* kernel logical cpuid */
- int irq_irq; /* the IRQ number */
- int irq_int_bit; /* Bridge interrupt pin */
- /* <0 means MSI */
- u64 irq_xtalkaddr; /* xtalkaddr IRQ is sent to */
- int irq_bridge_type;/* pciio asic type (pciio.h) */
- void *irq_bridge; /* bridge generating irq */
- void *irq_pciioinfo; /* associated pciio_info_t */
- int irq_last_intr; /* For Shub lb lost intr WAR */
- int irq_cookie; /* unique cookie */
- int irq_flags; /* flags */
- int irq_share_cnt; /* num devices sharing IRQ */
- struct list_head list; /* list of sn_irq_info structs */
- struct rcu_head rcu; /* rcu callback list */
-};
-
-extern void sn_send_IPI_phys(int, long, int, int);
-extern u64 sn_intr_alloc(nasid_t, int,
- struct sn_irq_info *,
- int, nasid_t, int);
-extern void sn_intr_free(nasid_t, int, struct sn_irq_info *);
-extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int);
-extern void sn_set_err_irq_affinity(unsigned int);
-extern struct list_head **sn_irq_lh;
-
-#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector)
-
#endif /* _ASM_IA64_SN_INTR_H */
diff --git a/arch/ia64/include/asm/sn/io.h b/arch/ia64/include/asm/sn/io.h
deleted file mode 100644
index 41c73a735628..000000000000
--- a/arch/ia64/include/asm/sn/io.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_SN_IO_H
-#define _ASM_SN_IO_H
-#include <linux/compiler.h>
-#include <asm/intrinsics.h>
-
-extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
-extern void __sn_mmiowb(void); /* Forward definition */
-
-extern int num_cnodes;
-
-#define __sn_mf_a() ia64_mfa()
-
-extern void sn_dma_flush(unsigned long);
-
-#define __sn_inb ___sn_inb
-#define __sn_inw ___sn_inw
-#define __sn_inl ___sn_inl
-#define __sn_outb ___sn_outb
-#define __sn_outw ___sn_outw
-#define __sn_outl ___sn_outl
-#define __sn_readb ___sn_readb
-#define __sn_readw ___sn_readw
-#define __sn_readl ___sn_readl
-#define __sn_readq ___sn_readq
-#define __sn_readb_relaxed ___sn_readb_relaxed
-#define __sn_readw_relaxed ___sn_readw_relaxed
-#define __sn_readl_relaxed ___sn_readl_relaxed
-#define __sn_readq_relaxed ___sn_readq_relaxed
-
-/*
- * Convenience macros for setting/clearing bits using the above accessors
- */
-
-#define __sn_setq_relaxed(addr, val) \
- writeq((__sn_readq_relaxed(addr) | (val)), (addr))
-#define __sn_clrq_relaxed(addr, val) \
- writeq((__sn_readq_relaxed(addr) & ~(val)), (addr))
-
-/*
- * The following routines are SN Platform specific, called when
- * a reference is made to inX/outX set macros. SN Platform
- * inX set of macros ensures that Posted DMA writes on the
- * Bridge is flushed.
- *
- * The routines should be self explainatory.
- */
-
-static inline unsigned int
-___sn_inb (unsigned long port)
-{
- volatile unsigned char *addr;
- unsigned char ret = -1;
-
- if ((addr = sn_io_addr(port))) {
- ret = *addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- }
- return ret;
-}
-
-static inline unsigned int
-___sn_inw (unsigned long port)
-{
- volatile unsigned short *addr;
- unsigned short ret = -1;
-
- if ((addr = sn_io_addr(port))) {
- ret = *addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- }
- return ret;
-}
-
-static inline unsigned int
-___sn_inl (unsigned long port)
-{
- volatile unsigned int *addr;
- unsigned int ret = -1;
-
- if ((addr = sn_io_addr(port))) {
- ret = *addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- }
- return ret;
-}
-
-static inline void
-___sn_outb (unsigned char val, unsigned long port)
-{
- volatile unsigned char *addr;
-
- if ((addr = sn_io_addr(port))) {
- *addr = val;
- __sn_mmiowb();
- }
-}
-
-static inline void
-___sn_outw (unsigned short val, unsigned long port)
-{
- volatile unsigned short *addr;
-
- if ((addr = sn_io_addr(port))) {
- *addr = val;
- __sn_mmiowb();
- }
-}
-
-static inline void
-___sn_outl (unsigned int val, unsigned long port)
-{
- volatile unsigned int *addr;
-
- if ((addr = sn_io_addr(port))) {
- *addr = val;
- __sn_mmiowb();
- }
-}
-
-/*
- * The following routines are SN Platform specific, called when
- * a reference is made to readX/writeX set macros. SN Platform
- * readX set of macros ensures that Posted DMA writes on the
- * Bridge is flushed.
- *
- * The routines should be self explainatory.
- */
-
-static inline unsigned char
-___sn_readb (const volatile void __iomem *addr)
-{
- unsigned char val;
-
- val = *(volatile unsigned char __force *)addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- return val;
-}
-
-static inline unsigned short
-___sn_readw (const volatile void __iomem *addr)
-{
- unsigned short val;
-
- val = *(volatile unsigned short __force *)addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- return val;
-}
-
-static inline unsigned int
-___sn_readl (const volatile void __iomem *addr)
-{
- unsigned int val;
-
- val = *(volatile unsigned int __force *)addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- return val;
-}
-
-static inline unsigned long
-___sn_readq (const volatile void __iomem *addr)
-{
- unsigned long val;
-
- val = *(volatile unsigned long __force *)addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- return val;
-}
-
-/*
- * For generic and SN2 kernels, we have a set of fast access
- * PIO macros. These macros are provided on SN Platform
- * because the normal inX and readX macros perform an
- * additional task of flushing Post DMA request on the Bridge.
- *
- * These routines should be self explainatory.
- */
-
-static inline unsigned int
-sn_inb_fast (unsigned long port)
-{
- volatile unsigned char *addr = (unsigned char *)port;
- unsigned char ret;
-
- ret = *addr;
- __sn_mf_a();
- return ret;
-}
-
-static inline unsigned int
-sn_inw_fast (unsigned long port)
-{
- volatile unsigned short *addr = (unsigned short *)port;
- unsigned short ret;
-
- ret = *addr;
- __sn_mf_a();
- return ret;
-}
-
-static inline unsigned int
-sn_inl_fast (unsigned long port)
-{
- volatile unsigned int *addr = (unsigned int *)port;
- unsigned int ret;
-
- ret = *addr;
- __sn_mf_a();
- return ret;
-}
-
-static inline unsigned char
-___sn_readb_relaxed (const volatile void __iomem *addr)
-{
- return *(volatile unsigned char __force *)addr;
-}
-
-static inline unsigned short
-___sn_readw_relaxed (const volatile void __iomem *addr)
-{
- return *(volatile unsigned short __force *)addr;
-}
-
-static inline unsigned int
-___sn_readl_relaxed (const volatile void __iomem *addr)
-{
- return *(volatile unsigned int __force *) addr;
-}
-
-static inline unsigned long
-___sn_readq_relaxed (const volatile void __iomem *addr)
-{
- return *(volatile unsigned long __force *) addr;
-}
-
-struct pci_dev;
-
-static inline int
-sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan)
-{
-
- if (vchan > 1) {
- return -1;
- }
-
- if (!(*addr >> 32)) /* Using a mask here would be cleaner */
- return 0; /* but this generates better code */
-
- if (vchan == 1) {
- /* Set Bit 57 */
- *addr |= (1UL << 57);
- } else {
- /* Clear Bit 57 */
- *addr &= ~(1UL << 57);
- }
-
- return 0;
-}
-
-#endif /* _ASM_SN_IO_H */
diff --git a/arch/ia64/include/asm/sn/ioc3.h b/arch/ia64/include/asm/sn/ioc3.h
deleted file mode 100644
index d4a524951df3..000000000000
--- a/arch/ia64/include/asm/sn/ioc3.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2005 Silicon Graphics, Inc.
- */
-#ifndef IA64_SN_IOC3_H
-#define IA64_SN_IOC3_H
-
-/* serial port register map */
-struct ioc3_serialregs {
- uint32_t sscr;
- uint32_t stpir;
- uint32_t stcir;
- uint32_t srpir;
- uint32_t srcir;
- uint32_t srtr;
- uint32_t shadow;
-};
-
-/* SUPERIO uart register map */
-struct ioc3_uartregs {
- char iu_lcr;
- union {
- char iir; /* read only */
- char fcr; /* write only */
- } u3;
- union {
- char ier; /* DLAB == 0 */
- char dlm; /* DLAB == 1 */
- } u2;
- union {
- char rbr; /* read only, DLAB == 0 */
- char thr; /* write only, DLAB == 0 */
- char dll; /* DLAB == 1 */
- } u1;
- char iu_scr;
- char iu_msr;
- char iu_lsr;
- char iu_mcr;
-};
-
-#define iu_rbr u1.rbr
-#define iu_thr u1.thr
-#define iu_dll u1.dll
-#define iu_ier u2.ier
-#define iu_dlm u2.dlm
-#define iu_iir u3.iir
-#define iu_fcr u3.fcr
-
-struct ioc3_sioregs {
- char fill[0x170];
- struct ioc3_uartregs uartb;
- struct ioc3_uartregs uarta;
-};
-
-/* PCI IO/mem space register map */
-struct ioc3 {
- uint32_t pci_id;
- uint32_t pci_scr;
- uint32_t pci_rev;
- uint32_t pci_lat;
- uint32_t pci_addr;
- uint32_t pci_err_addr_l;
- uint32_t pci_err_addr_h;
-
- uint32_t sio_ir;
- /* these registers are read-only for general kernel code. To
- * modify them use the functions in ioc3.c
- */
- uint32_t sio_ies;
- uint32_t sio_iec;
- uint32_t sio_cr;
- uint32_t int_out;
- uint32_t mcr;
- uint32_t gpcr_s;
- uint32_t gpcr_c;
- uint32_t gpdr;
- uint32_t gppr[9];
- char fill[0x4c];
-
- /* serial port registers */
- uint32_t sbbr_h;
- uint32_t sbbr_l;
-
- struct ioc3_serialregs port_a;
- struct ioc3_serialregs port_b;
- char fill1[0x1ff10];
- /* superio registers */
- struct ioc3_sioregs sregs;
-};
-
-/* These don't exist on the ioc3 serial card... */
-#define eier fill1[8]
-#define eisr fill1[4]
-
-#define PCI_LAT 0xc /* Latency Timer */
-#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */
-#define UARTA_BASE 0x178
-#define UARTB_BASE 0x170
-
-
-/* bitmasks for serial RX status byte */
-#define RXSB_OVERRUN 0x01 /* char(s) lost */
-#define RXSB_PAR_ERR 0x02 /* parity error */
-#define RXSB_FRAME_ERR 0x04 /* framing error */
-#define RXSB_BREAK 0x08 /* break character */
-#define RXSB_CTS 0x10 /* state of CTS */
-#define RXSB_DCD 0x20 /* state of DCD */
-#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */
-#define RXSB_DATA_VALID 0x80 /* FRAME_ERR PAR_ERR & BREAK valid */
-
-/* bitmasks for serial TX control byte */
-#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */
-#define TXCB_INVALID 0x00 /* byte is invalid */
-#define TXCB_VALID 0x40 /* byte is valid */
-#define TXCB_MCR 0x80 /* data<7:0> to modem cntrl register */
-#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */
-
-/* bitmasks for SBBR_L */
-#define SBBR_L_SIZE 0x00000001 /* 0 1KB rings, 1 4KB rings */
-
-/* bitmasks for SSCR_<A:B> */
-#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */
-#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
-#define SSCR_HFC_EN 0x00020000 /* h/w flow cntrl enabled */
-#define SSCR_RX_RING_DCD 0x00040000 /* postRX record on delta-DCD */
-#define SSCR_RX_RING_CTS 0x00080000 /* postRX record on delta-CTS */
-#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */
-#define SSCR_DIAG 0x00200000 /* bypass clock divider */
-#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */
-#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */
-#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */
-#define SSCR_PAUSE_STATE 0x40000000 /* set when PAUSE takes effect*/
-#define SSCR_RESET 0x80000000 /* reset DMA channels */
-
-/* all producer/consumer pointers are the same bitfield */
-#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */
-#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */
-#define PROD_CONS_PTR_OFF 3
-
-/* bitmasks for SRCIR_<A:B> */
-#define SRCIR_ARM 0x80000000 /* arm RX timer */
-
-/* bitmasks for SHADOW_<A:B> */
-#define SHADOW_DR 0x00000001 /* data ready */
-#define SHADOW_OE 0x00000002 /* overrun error */
-#define SHADOW_PE 0x00000004 /* parity error */
-#define SHADOW_FE 0x00000008 /* framing error */
-#define SHADOW_BI 0x00000010 /* break interrupt */
-#define SHADOW_THRE 0x00000020 /* transmit holding reg empty */
-#define SHADOW_TEMT 0x00000040 /* transmit shift reg empty */
-#define SHADOW_RFCE 0x00000080 /* char in RX fifo has error */
-#define SHADOW_DCTS 0x00010000 /* delta clear to send */
-#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */
-#define SHADOW_CTS 0x00100000 /* clear to send */
-#define SHADOW_DCD 0x00800000 /* data carrier detect */
-#define SHADOW_DTR 0x01000000 /* data terminal ready */
-#define SHADOW_RTS 0x02000000 /* request to send */
-#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
-#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
-#define SHADOW_LOOP 0x10000000 /* loopback enabled */
-
-/* bitmasks for SRTR_<A:B> */
-#define SRTR_CNT 0x00000fff /* reload value for RX timer */
-#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */
-#define SRTR_CNT_VAL_SHIFT 16
-#define SRTR_HZ 16000 /* SRTR clock frequency */
-
-/* bitmasks for SIO_IR, SIO_IEC and SIO_IES */
-#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */
-#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */
-#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */
-#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */
-#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */
-#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */
-#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */
-#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */
-#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */
-#define SIO_IR_SB_TX_MT 0x00000200
-#define SIO_IR_SB_RX_FULL 0x00000400
-#define SIO_IR_SB_RX_HIGH 0x00000800
-#define SIO_IR_SB_RX_TIMER 0x00001000
-#define SIO_IR_SB_DELTA_DCD 0x00002000
-#define SIO_IR_SB_DELTA_CTS 0x00004000
-#define SIO_IR_SB_INT 0x00008000
-#define SIO_IR_SB_TX_EXPLICIT 0x00010000
-#define SIO_IR_SB_MEMERR 0x00020000
-#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */
-#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */
-#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */
-#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */
-#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */
-#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */
-#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */
-#define SIO_IR_GEN_INT_SHIFT 28
-
-/* per device interrupt masks */
-#define SIO_IR_SA (SIO_IR_SA_TX_MT | \
- SIO_IR_SA_RX_FULL | \
- SIO_IR_SA_RX_HIGH | \
- SIO_IR_SA_RX_TIMER | \
- SIO_IR_SA_DELTA_DCD | \
- SIO_IR_SA_DELTA_CTS | \
- SIO_IR_SA_INT | \
- SIO_IR_SA_TX_EXPLICIT | \
- SIO_IR_SA_MEMERR)
-
-#define SIO_IR_SB (SIO_IR_SB_TX_MT | \
- SIO_IR_SB_RX_FULL | \
- SIO_IR_SB_RX_HIGH | \
- SIO_IR_SB_RX_TIMER | \
- SIO_IR_SB_DELTA_DCD | \
- SIO_IR_SB_DELTA_CTS | \
- SIO_IR_SB_INT | \
- SIO_IR_SB_TX_EXPLICIT | \
- SIO_IR_SB_MEMERR)
-
-#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \
- SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
-#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1)
-
-/* bitmasks for SIO_CR */
-#define SIO_CR_CMD_PULSE_SHIFT 15
-#define SIO_CR_SER_A_BASE_SHIFT 1
-#define SIO_CR_SER_B_BASE_SHIFT 8
-#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */
-#define SIO_CR_ARB_DIAG_TXA 0x00000000
-#define SIO_CR_ARB_DIAG_RXA 0x00080000
-#define SIO_CR_ARB_DIAG_TXB 0x00100000
-#define SIO_CR_ARB_DIAG_RXB 0x00180000
-#define SIO_CR_ARB_DIAG_PP 0x00200000
-#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */
-
-/* defs for some of the generic I/O pins */
-#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */
-#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */
-#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */
-
-#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */
-#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin cntrling uartb modeselect */
-#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin cntrling uarta modeselect */
-
-#endif /* IA64_SN_IOC3_H */
diff --git a/arch/ia64/include/asm/sn/klconfig.h b/arch/ia64/include/asm/sn/klconfig.h
deleted file mode 100644
index bcbf209d63be..000000000000
--- a/arch/ia64/include/asm/sn/klconfig.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Derived from IRIX <sys/SN/klconfig.h>.
- *
- * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved.
- * Copyright (C) 1999 by Ralf Baechle
- */
-#ifndef _ASM_IA64_SN_KLCONFIG_H
-#define _ASM_IA64_SN_KLCONFIG_H
-
-/*
- * The KLCONFIG structures store info about the various BOARDs found
- * during Hardware Discovery. In addition, it stores info about the
- * components found on the BOARDs.
- */
-
-typedef s32 klconf_off_t;
-
-
-/* Functions/macros needed to use this structure */
-
-typedef struct kl_config_hdr {
- char pad[20];
- klconf_off_t ch_board_info; /* the link list of boards */
- char pad0[88];
-} kl_config_hdr_t;
-
-
-#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
-
-/*
- * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
- * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
- * the LOCAL/current NODE. REMOTE means it is attached to a different
- * node.(TBD - Need a way to treat ROUTER boards.)
- *
- * There are 2 different structures to represent these boards -
- * lboard - Local board, rboard - remote board. These 2 structures
- * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
- * Figure below). The first byte of the rboard or lboard structure
- * is used to find out its type - no unions are used.
- * If it is a lboard, then the config info of this board will be found
- * on the local node. (LOCAL NODE BASE + offset value gives pointer to
- * the structure.
- * If it is a rboard, the local structure contains the node number
- * and the offset of the beginning of the LINKED LIST on the remote node.
- * The details of the hardware on a remote node can be built locally,
- * if required, by reading the LINKED LIST on the remote node and
- * ignoring all the rboards on that node.
- *
- * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
- * First board info on the remote node. The remote node list is
- * traversed as the local list, using the REMOTE BASE ADDRESS and not
- * the local base address and ignoring all rboard values.
- *
- *
- KLCONFIG
-
- +------------+ +------------+ +------------+ +------------+
- | lboard | +-->| lboard | +-->| rboard | +-->| lboard |
- +------------+ | +------------+ | +------------+ | +------------+
- | board info | | | board info | | |errinfo,bptr| | | board info |
- +------------+ | +------------+ | +------------+ | +------------+
- | offset |--+ | offset |--+ | offset |--+ |offset=NULL |
- +------------+ +------------+ +------------+ +------------+
-
-
- +------------+
- | board info |
- +------------+ +--------------------------------+
- | compt 1 |------>| type, rev, diaginfo, size ... | (CPU)
- +------------+ +--------------------------------+
- | compt 2 |--+
- +------------+ | +--------------------------------+
- | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK)
- +------------+ +--------------------------------+
- | errinfo |--+
- +------------+ | +--------------------------------+
- +--->|r/l brd errinfo,compt err flags |
- +--------------------------------+
-
- *
- * Each BOARD consists of COMPONENTs and the BOARD structure has
- * pointers (offsets) to its COMPONENT structure.
- * The COMPONENT structure has version info, size and speed info, revision,
- * error info and the NIC info. This structure can accommodate any
- * BOARD with arbitrary COMPONENT composition.
- *
- * The ERRORINFO part of each BOARD has error information
- * that describes errors about the BOARD itself. It also has flags to
- * indicate the COMPONENT(s) on the board that have errors. The error
- * information specific to the COMPONENT is present in the respective
- * COMPONENT structure.
- *
- * The ERRORINFO structure is also treated like a COMPONENT, ie. the
- * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
- * structure also has a pointer to the ERRORINFO structure. This is
- * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
- * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
- * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
- * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
- * which is present on the REMOTE NODE.(TBD)
- * REMOTE ERRINFO can be stored on any of the nearest nodes
- * or on all the nearest nodes.(TBD)
- * Like BOARD structures, REMOTE ERRINFO structures can be built locally
- * using the rboard errinfo pointer.
- *
- * In order to get useful information from this Data organization, a set of
- * interface routines are provided (TBD). The important thing to remember while
- * manipulating the structures, is that, the NODE number information should
- * be used. If the NODE is non-zero (remote) then each offset should
- * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
- * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
- *
- * Note that these structures do not provide much info about connectivity.
- * That info will be part of HWGRAPH, which is an extension of the cfg_t
- * data structure. (ref IP27prom/cfg.h) It has to be extended to include
- * the IO part of the Network(TBD).
- *
- * The data structures below define the above concepts.
- */
-
-
-/*
- * BOARD classes
- */
-
-#define KLCLASS_MASK 0xf0
-#define KLCLASS_NONE 0x00
-#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */
-#define KLCLASS_CPU KLCLASS_NODE
-#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI
- and the non-graphics widget boards */
-#define KLCLASS_ROUTER 0x30 /* Router board */
-#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board
- so that we can record error info */
-#define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */
-#define KLCLASS_MAX 8 /* Bump this if a new CLASS is added */
-
-#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
-
-
-/*
- * board types
- */
-
-#define KLTYPE_MASK 0x0f
-#define KLTYPE(_x) ((_x) & KLTYPE_MASK)
-
-#define KLTYPE_SNIA (KLCLASS_CPU | 0x1)
-#define KLTYPE_TIO (KLCLASS_CPU | 0x2)
-
-#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
-#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
-#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
-
-#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2)
-
-#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0)
-#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4)
-#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6)
-#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7)
-#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8)
-#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9)
-#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa)
-#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb)
-#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc)
-#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd)
-
-
-/*
- * board structures
- */
-
-#define MAX_COMPTS_PER_BRD 24
-
-typedef struct lboard_s {
- klconf_off_t brd_next_any; /* Next BOARD */
- unsigned char struct_type; /* type of structure, local or remote */
- unsigned char brd_type; /* type+class */
- unsigned char brd_sversion; /* version of this structure */
- unsigned char brd_brevision; /* board revision */
- unsigned char brd_promver; /* board prom version, if any */
- unsigned char brd_flags; /* Enabled, Disabled etc */
- unsigned char brd_slot; /* slot number */
- unsigned short brd_debugsw; /* Debug switches */
- geoid_t brd_geoid; /* geo id */
- partid_t brd_partition; /* Partition number */
- unsigned short brd_diagval; /* diagnostic value */
- unsigned short brd_diagparm; /* diagnostic parameter */
- unsigned char brd_inventory; /* inventory history */
- unsigned char brd_numcompts; /* Number of components */
- nic_t brd_nic; /* Number in CAN */
- nasid_t brd_nasid; /* passed parameter */
- klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
- klconf_off_t brd_errinfo; /* Board's error information */
- struct lboard_s *brd_parent; /* Logical parent for this brd */
- char pad0[4];
- unsigned char brd_confidence; /* confidence that the board is bad */
- nasid_t brd_owner; /* who owns this board */
- unsigned char brd_nic_flags; /* To handle 8 more NICs */
- char pad1[24]; /* future expansion */
- char brd_name[32];
- nasid_t brd_next_same_host; /* host of next brd w/same nasid */
- klconf_off_t brd_next_same; /* Next BOARD with same nasid */
-} lboard_t;
-
-/*
- * Generic info structure. This stores common info about a
- * component.
- */
-
-typedef struct klinfo_s { /* Generic info */
- unsigned char struct_type; /* type of this structure */
- unsigned char struct_version; /* version of this structure */
- unsigned char flags; /* Enabled, disabled etc */
- unsigned char revision; /* component revision */
- unsigned short diagval; /* result of diagnostics */
- unsigned short diagparm; /* diagnostic parameter */
- unsigned char inventory; /* previous inventory status */
- unsigned short partid; /* widget part number */
- nic_t nic; /* MUst be aligned properly */
- unsigned char physid; /* physical id of component */
- unsigned int virtid; /* virtual id as seen by system */
- unsigned char widid; /* Widget id - if applicable */
- nasid_t nasid; /* node number - from parent */
- char pad1; /* pad out structure. */
- char pad2; /* pad out structure. */
- void *data;
- klconf_off_t errinfo; /* component specific errors */
- unsigned short pad3; /* pci fields have moved over to */
- unsigned short pad4; /* klbri_t */
-} klinfo_t ;
-
-
-static inline lboard_t *find_lboard_next(lboard_t * brd)
-{
- if (brd && brd->brd_next_any)
- return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
- return NULL;
-}
-
-#endif /* _ASM_IA64_SN_KLCONFIG_H */
diff --git a/arch/ia64/include/asm/sn/l1.h b/arch/ia64/include/asm/sn/l1.h
deleted file mode 100644
index 344bf44bb356..000000000000
--- a/arch/ia64/include/asm/sn/l1.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#ifndef _ASM_IA64_SN_L1_H
-#define _ASM_IA64_SN_L1_H
-
-/* brick type response codes */
-#define L1_BRICKTYPE_PX 0x23 /* # */
-#define L1_BRICKTYPE_PE 0x25 /* % */
-#define L1_BRICKTYPE_N_p0 0x26 /* & */
-#define L1_BRICKTYPE_IP45 0x34 /* 4 */
-#define L1_BRICKTYPE_IP41 0x35 /* 5 */
-#define L1_BRICKTYPE_TWISTER 0x36 /* 6 */ /* IP53 & ROUTER */
-#define L1_BRICKTYPE_IX 0x3d /* = */
-#define L1_BRICKTYPE_IP34 0x61 /* a */
-#define L1_BRICKTYPE_GA 0x62 /* b */
-#define L1_BRICKTYPE_C 0x63 /* c */
-#define L1_BRICKTYPE_OPUS_TIO 0x66 /* f */
-#define L1_BRICKTYPE_I 0x69 /* i */
-#define L1_BRICKTYPE_N 0x6e /* n */
-#define L1_BRICKTYPE_OPUS 0x6f /* o */
-#define L1_BRICKTYPE_P 0x70 /* p */
-#define L1_BRICKTYPE_R 0x72 /* r */
-#define L1_BRICKTYPE_CHI_CG 0x76 /* v */
-#define L1_BRICKTYPE_X 0x78 /* x */
-#define L1_BRICKTYPE_X2 0x79 /* y */
-#define L1_BRICKTYPE_SA 0x5e /* ^ */
-#define L1_BRICKTYPE_PA 0x6a /* j */
-#define L1_BRICKTYPE_IA 0x6b /* k */
-#define L1_BRICKTYPE_ATHENA 0x2b /* + */
-#define L1_BRICKTYPE_DAYTONA 0x7a /* z */
-#define L1_BRICKTYPE_1932 0x2c /* . */
-#define L1_BRICKTYPE_191010 0x2e /* , */
-
-/* board type response codes */
-#define L1_BOARDTYPE_IP69 0x0100 /* CA */
-#define L1_BOARDTYPE_IP63 0x0200 /* CB */
-#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */
-#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */
-#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */
-#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */
-#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */
-#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */
-#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */
-
-#endif /* _ASM_IA64_SN_L1_H */
diff --git a/arch/ia64/include/asm/sn/leds.h b/arch/ia64/include/asm/sn/leds.h
deleted file mode 100644
index 66cf8c4d92c9..000000000000
--- a/arch/ia64/include/asm/sn/leds.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_LEDS_H
-#define _ASM_IA64_SN_LEDS_H
-
-#include <asm/sn/addrs.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/shub_mmr.h>
-
-#define LED0 (LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0))
-#define LED_CPU_SHIFT 16
-
-#define LED_CPU_HEARTBEAT 0x01
-#define LED_CPU_ACTIVITY 0x02
-#define LED_ALWAYS_SET 0x00
-
-/*
- * Basic macros for flashing the LEDS on an SGI SN.
- */
-
-static __inline__ void
-set_led_bits(u8 value, u8 mask)
-{
- pda->led_state = (pda->led_state & ~mask) | (value & mask);
- *pda->led_address = (short) pda->led_state;
-}
-
-#endif /* _ASM_IA64_SN_LEDS_H */
-
diff --git a/arch/ia64/include/asm/sn/module.h b/arch/ia64/include/asm/sn/module.h
deleted file mode 100644
index 734e980ece2f..000000000000
--- a/arch/ia64/include/asm/sn/module.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_MODULE_H
-#define _ASM_IA64_SN_MODULE_H
-
-/* parameter for format_module_id() */
-#define MODULE_FORMAT_BRIEF 1
-#define MODULE_FORMAT_LONG 2
-#define MODULE_FORMAT_LCD 3
-
-/*
- * Module id format
- *
- * 31-16 Rack ID (encoded class, group, number - 16-bit unsigned int)
- * 15-8 Brick type (8-bit ascii character)
- * 7-0 Bay (brick position in rack (0-63) - 8-bit unsigned int)
- *
- */
-
-/*
- * Macros for getting the brick type
- */
-#define MODULE_BTYPE_MASK 0xff00
-#define MODULE_BTYPE_SHFT 8
-#define MODULE_GET_BTYPE(_m) (((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT)
-#define MODULE_BT_TO_CHAR(_b) ((char)(_b))
-#define MODULE_GET_BTCHAR(_m) (MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m)))
-
-/*
- * Macros for getting the rack ID.
- */
-#define MODULE_RACK_MASK 0xffff0000
-#define MODULE_RACK_SHFT 16
-#define MODULE_GET_RACK(_m) (((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT)
-
-/*
- * Macros for getting the brick position
- */
-#define MODULE_BPOS_MASK 0x00ff
-#define MODULE_BPOS_SHFT 0
-#define MODULE_GET_BPOS(_m) (((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT)
-
-/*
- * Macros for encoding and decoding rack IDs
- * A rack number consists of three parts:
- * class (0==CPU/mixed, 1==I/O), group, number
- *
- * Rack number is stored just as it is displayed on the screen:
- * a 3-decimal-digit number.
- */
-#define RACK_CLASS_DVDR 100
-#define RACK_GROUP_DVDR 10
-#define RACK_NUM_DVDR 1
-
-#define RACK_CREATE_RACKID(_c, _g, _n) ((_c) * RACK_CLASS_DVDR + \
- (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR)
-
-#define RACK_GET_CLASS(_r) ((_r) / RACK_CLASS_DVDR)
-#define RACK_GET_GROUP(_r) (((_r) - RACK_GET_CLASS(_r) * \
- RACK_CLASS_DVDR) / RACK_GROUP_DVDR)
-#define RACK_GET_NUM(_r) (((_r) - RACK_GET_CLASS(_r) * \
- RACK_CLASS_DVDR - RACK_GET_GROUP(_r) * \
- RACK_GROUP_DVDR) / RACK_NUM_DVDR)
-
-/*
- * Macros for encoding and decoding rack IDs
- * A rack number consists of three parts:
- * class 1 bit, 0==CPU/mixed, 1==I/O
- * group 2 bits for CPU/mixed, 3 bits for I/O
- * number 3 bits for CPU/mixed, 2 bits for I/O (1 based)
- */
-#define RACK_GROUP_BITS(_r) (RACK_GET_CLASS(_r) ? 3 : 2)
-#define RACK_NUM_BITS(_r) (RACK_GET_CLASS(_r) ? 2 : 3)
-
-#define RACK_CLASS_MASK(_r) 0x20
-#define RACK_CLASS_SHFT(_r) 5
-#define RACK_ADD_CLASS(_r, _c) \
- ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r))
-
-#define RACK_GROUP_SHFT(_r) RACK_NUM_BITS(_r)
-#define RACK_GROUP_MASK(_r) \
- ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) )
-#define RACK_ADD_GROUP(_r, _g) \
- ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r))
-
-#define RACK_NUM_SHFT(_r) 0
-#define RACK_NUM_MASK(_r) \
- ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) )
-#define RACK_ADD_NUM(_r, _n) \
- ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r))
-
-
-/*
- * Brick type definitions
- */
-#define MAX_BRICK_TYPES 256 /* brick type is stored as uchar */
-
-extern char brick_types[];
-
-#define MODULE_CBRICK 0
-#define MODULE_RBRICK 1
-#define MODULE_IBRICK 2
-#define MODULE_KBRICK 3
-#define MODULE_XBRICK 4
-#define MODULE_DBRICK 5
-#define MODULE_PBRICK 6
-#define MODULE_NBRICK 7
-#define MODULE_PEBRICK 8
-#define MODULE_PXBRICK 9
-#define MODULE_IXBRICK 10
-#define MODULE_CGBRICK 11
-#define MODULE_OPUSBRICK 12
-#define MODULE_SABRICK 13 /* TIO BringUp Brick */
-#define MODULE_IABRICK 14
-#define MODULE_PABRICK 15
-#define MODULE_GABRICK 16
-#define MODULE_OPUS_TIO 17 /* OPUS TIO Riser */
-
-extern char brick_types[];
-extern void format_module_id(char *, moduleid_t, int);
-
-#endif /* _ASM_IA64_SN_MODULE_H */
diff --git a/arch/ia64/include/asm/sn/mspec.h b/arch/ia64/include/asm/sn/mspec.h
deleted file mode 100644
index c1d3c50c3223..000000000000
--- a/arch/ia64/include/asm/sn/mspec.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_MSPEC_H
-#define _ASM_IA64_SN_MSPEC_H
-
-#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */
-
-#define FETCHOP_LOAD 0
-#define FETCHOP_INCREMENT 8
-#define FETCHOP_DECREMENT 16
-#define FETCHOP_CLEAR 24
-
-#define FETCHOP_STORE 0
-#define FETCHOP_AND 24
-#define FETCHOP_OR 32
-
-#define FETCHOP_CLEAR_CACHE 56
-
-#define FETCHOP_LOAD_OP(addr, op) ( \
- *(volatile long *)((char*) (addr) + (op)))
-
-#define FETCHOP_STORE_OP(addr, op, x) ( \
- *(volatile long *)((char*) (addr) + (op)) = (long) (x))
-
-#ifdef __KERNEL__
-
-/*
- * Each Atomic Memory Operation (amo, formerly known as fetchop)
- * variable is 64 bytes long. The first 8 bytes are used. The
- * remaining 56 bytes are unaddressable due to the operation taking
- * that portion of the address.
- *
- * NOTE: The amo structure _MUST_ be placed in either the first or second
- * half of the cache line. The cache line _MUST NOT_ be used for anything
- * other than additional amo entries. This is because there are two
- * addresses which reference the same physical cache line. One will
- * be a cached entry with the memory type bits all set. This address
- * may be loaded into processor cache. The amo will be referenced
- * uncached via the memory special memory type. If any portion of the
- * cached cache-line is modified, when that line is flushed, it will
- * overwrite the uncached value in physical memory and lead to
- * inconsistency.
- */
-struct amo {
- u64 variable;
- u64 unused[7];
-};
-
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IA64_SN_MSPEC_H */
diff --git a/arch/ia64/include/asm/sn/nodepda.h b/arch/ia64/include/asm/sn/nodepda.h
deleted file mode 100644
index 7c8b4710f071..000000000000
--- a/arch/ia64/include/asm/sn/nodepda.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_NODEPDA_H
-#define _ASM_IA64_SN_NODEPDA_H
-
-
-#include <asm/irq.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/bte.h>
-
-/*
- * NUMA Node-Specific Data structures are defined in this file.
- * In particular, this is the location of the node PDA.
- * A pointer to the right node PDA is saved in each CPU PDA.
- */
-
-/*
- * Node-specific data structure.
- *
- * One of these structures is allocated on each node of a NUMA system.
- *
- * This structure provides a convenient way of keeping together
- * all per-node data structures.
- */
-struct phys_cpuid {
- short nasid;
- char subnode;
- char slice;
-};
-
-struct nodepda_s {
- void *pdinfo; /* Platform-dependent per-node info */
-
- /*
- * The BTEs on this node are shared by the local cpus
- */
- struct bteinfo_s bte_if[MAX_BTES_PER_NODE]; /* Virtual Interface */
- struct timer_list bte_recovery_timer;
- spinlock_t bte_recovery_lock;
-
- /*
- * Array of pointers to the nodepdas for each node.
- */
- struct nodepda_s *pernode_pdaindr[MAX_COMPACT_NODES];
-
- /*
- * Array of physical cpu identifiers. Indexed by cpuid.
- */
- struct phys_cpuid phys_cpuid[NR_CPUS];
- spinlock_t ptc_lock ____cacheline_aligned_in_smp;
-};
-
-typedef struct nodepda_s nodepda_t;
-
-/*
- * Access Functions for node PDA.
- * Since there is one nodepda for each node, we need a convenient mechanism
- * to access these nodepdas without cluttering code with #ifdefs.
- * The next set of definitions provides this.
- * Routines are expected to use
- *
- * sn_nodepda - to access node PDA for the node on which code is running
- * NODEPDA(cnodeid) - to access node PDA for cnodeid
- */
-
-DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda);
-#define sn_nodepda __this_cpu_read(__sn_nodepda)
-#define NODEPDA(cnodeid) (sn_nodepda->pernode_pdaindr[cnodeid])
-
-/*
- * Check if given a compact node id the corresponding node has all the
- * cpus disabled.
- */
-#define is_headless_node(cnodeid) (nr_cpus_node(cnodeid) == 0)
-
-#endif /* _ASM_IA64_SN_NODEPDA_H */
diff --git a/arch/ia64/include/asm/sn/pcibr_provider.h b/arch/ia64/include/asm/sn/pcibr_provider.h
deleted file mode 100644
index da205b7cdaac..000000000000
--- a/arch/ia64/include/asm/sn/pcibr_provider.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
-#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
-
-#include <asm/sn/intr.h>
-#include <asm/sn/pcibus_provider_defs.h>
-
-/* Workarounds */
-#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */
-
-#define BUSTYPE_MASK 0x1
-
-/* Macros given a pcibus structure */
-#define IS_PCIX(ps) ((ps)->pbi_bridge_mode & BUSTYPE_MASK)
-#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \
- asic == PCIIO_ASIC_TYPE_TIOCP)
-#define IS_PIC_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC)
-#define IS_TIOCP_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP)
-
-
-/*
- * The different PCI Bridge types supported on the SGI Altix platforms
- */
-#define PCIBR_BRIDGETYPE_UNKNOWN -1
-#define PCIBR_BRIDGETYPE_PIC 2
-#define PCIBR_BRIDGETYPE_TIOCP 3
-
-/*
- * Bridge 64bit Direct Map Attributes
- */
-#define PCI64_ATTR_PREF (1ull << 59)
-#define PCI64_ATTR_PREC (1ull << 58)
-#define PCI64_ATTR_VIRTUAL (1ull << 57)
-#define PCI64_ATTR_BAR (1ull << 56)
-#define PCI64_ATTR_SWAP (1ull << 55)
-#define PCI64_ATTR_VIRTUAL1 (1ull << 54)
-
-#define PCI32_LOCAL_BASE 0
-#define PCI32_MAPPED_BASE 0x40000000
-#define PCI32_DIRECT_BASE 0x80000000
-
-#define IS_PCI32_MAPPED(x) ((u64)(x) < PCI32_DIRECT_BASE && \
- (u64)(x) >= PCI32_MAPPED_BASE)
-#define IS_PCI32_DIRECT(x) ((u64)(x) >= PCI32_MAPPED_BASE)
-
-
-/*
- * Bridge PMU Address Transaltion Entry Attibutes
- */
-#define PCI32_ATE_V (0x1 << 0)
-#define PCI32_ATE_CO (0x1 << 1) /* PIC ASIC ONLY */
-#define PCI32_ATE_PIO (0x1 << 1) /* TIOCP ASIC ONLY */
-#define PCI32_ATE_MSI (0x1 << 2)
-#define PCI32_ATE_PREF (0x1 << 3)
-#define PCI32_ATE_BAR (0x1 << 4)
-#define PCI32_ATE_ADDR_SHFT 12
-
-#define MINIMAL_ATES_REQUIRED(addr, size) \
- (IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1))
-
-#define MINIMAL_ATE_FLAG(addr, size) \
- (MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0)
-
-/* bit 29 of the pci address is the SWAP bit */
-#define ATE_SWAPSHIFT 29
-#define ATE_SWAP_ON(x) ((x) |= (1 << ATE_SWAPSHIFT))
-#define ATE_SWAP_OFF(x) ((x) &= ~(1 << ATE_SWAPSHIFT))
-
-/*
- * I/O page size
- */
-#if PAGE_SIZE < 16384
-#define IOPFNSHIFT 12 /* 4K per mapped page */
-#else
-#define IOPFNSHIFT 14 /* 16K per mapped page */
-#endif
-
-#define IOPGSIZE (1 << IOPFNSHIFT)
-#define IOPG(x) ((x) >> IOPFNSHIFT)
-#define IOPGOFF(x) ((x) & (IOPGSIZE-1))
-
-#define PCIBR_DEV_SWAP_DIR (1ull << 19)
-#define PCIBR_CTRL_PAGE_SIZE (0x1 << 21)
-
-/*
- * PMU resources.
- */
-struct ate_resource{
- u64 *ate;
- u64 num_ate;
- u64 lowest_free_index;
-};
-
-struct pcibus_info {
- struct pcibus_bussoft pbi_buscommon; /* common header */
- u32 pbi_moduleid;
- short pbi_bridge_type;
- short pbi_bridge_mode;
-
- struct ate_resource pbi_int_ate_resource;
- u64 pbi_int_ate_size;
-
- u64 pbi_dir_xbase;
- char pbi_hub_xid;
-
- u64 pbi_devreg[8];
-
- u32 pbi_valid_devices;
- u32 pbi_enabled_devices;
-
- spinlock_t pbi_lock;
-};
-
-extern int pcibr_init_provider(void);
-extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *);
-extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type);
-extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type);
-extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int);
-
-/*
- * prototypes for the bridge asic register access routines in pcibr_reg.c
- */
-extern void pcireg_control_bit_clr(struct pcibus_info *, u64);
-extern void pcireg_control_bit_set(struct pcibus_info *, u64);
-extern u64 pcireg_tflush_get(struct pcibus_info *);
-extern u64 pcireg_intr_status_get(struct pcibus_info *);
-extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, u64);
-extern void pcireg_intr_enable_bit_set(struct pcibus_info *, u64);
-extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64);
-extern void pcireg_force_intr_set(struct pcibus_info *, int);
-extern u64 pcireg_wrb_flush_get(struct pcibus_info *, int);
-extern void pcireg_int_ate_set(struct pcibus_info *, int, u64);
-extern u64 __iomem * pcireg_int_ate_addr(struct pcibus_info *, int);
-extern void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info);
-extern void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info);
-extern int pcibr_ate_alloc(struct pcibus_info *, int);
-extern void pcibr_ate_free(struct pcibus_info *, int);
-extern void ate_write(struct pcibus_info *, int, int, u64);
-extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
- void *resp, char **ssdt);
-extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
- int action, void *resp);
-extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus);
-#endif
diff --git a/arch/ia64/include/asm/sn/pcibus_provider_defs.h b/arch/ia64/include/asm/sn/pcibus_provider_defs.h
deleted file mode 100644
index 8f7c83d0f6d3..000000000000
--- a/arch/ia64/include/asm/sn/pcibus_provider_defs.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
-#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
-
-/*
- * SN pci asic types. Do not ever renumber these or reuse values. The
- * values must agree with what prom thinks they are.
- */
-
-#define PCIIO_ASIC_TYPE_UNKNOWN 0
-#define PCIIO_ASIC_TYPE_PPB 1
-#define PCIIO_ASIC_TYPE_PIC 2
-#define PCIIO_ASIC_TYPE_TIOCP 3
-#define PCIIO_ASIC_TYPE_TIOCA 4
-#define PCIIO_ASIC_TYPE_TIOCE 5
-
-#define PCIIO_ASIC_MAX_TYPES 6
-
-/*
- * Common pciio bus provider data. There should be one of these as the
- * first field in any pciio based provider soft structure (e.g. pcibr_soft
- * tioca_soft, etc).
- */
-
-struct pcibus_bussoft {
- u32 bs_asic_type; /* chipset type */
- u32 bs_xid; /* xwidget id */
- u32 bs_persist_busnum; /* Persistent Bus Number */
- u32 bs_persist_segment; /* Segment Number */
- u64 bs_legacy_io; /* legacy io pio addr */
- u64 bs_legacy_mem; /* legacy mem pio addr */
- u64 bs_base; /* widget base */
- struct xwidget_info *bs_xwidget_info;
-};
-
-struct pci_controller;
-/*
- * SN pci bus indirection
- */
-
-struct sn_pcibus_provider {
- dma_addr_t (*dma_map)(struct pci_dev *, unsigned long, size_t, int flags);
- dma_addr_t (*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags);
- void (*dma_unmap)(struct pci_dev *, dma_addr_t, int);
- void * (*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *);
- void (*force_interrupt)(struct sn_irq_info *);
- void (*target_interrupt)(struct sn_irq_info *);
-};
-
-/*
- * Flags used by the map interfaces
- * bits 3:0 specifies format of passed in address
- * bit 4 specifies that address is to be used for MSI
- */
-
-#define SN_DMA_ADDRTYPE(x) ((x) & 0xf)
-#define SN_DMA_ADDR_PHYS 1 /* address is an xio address. */
-#define SN_DMA_ADDR_XIO 2 /* address is phys memory */
-#define SN_DMA_MSI 0x10 /* Bus address is to be used for MSI */
-
-extern struct sn_pcibus_provider *sn_pci_provider[];
-#endif /* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */
diff --git a/arch/ia64/include/asm/sn/pcidev.h b/arch/ia64/include/asm/sn/pcidev.h
deleted file mode 100644
index 1c2382cea807..000000000000
--- a/arch/ia64/include/asm/sn/pcidev.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PCIDEV_H
-#define _ASM_IA64_SN_PCI_PCIDEV_H
-
-#include <linux/pci.h>
-
-/*
- * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to
- * the pcidev_info structs for all devices under a controller, we keep a
- * list of pcidev_info under pci_controller->platform_data.
- */
-struct sn_platform_data {
- void *provider_soft;
- struct list_head pcidev_info;
-};
-
-#define SN_PLATFORM_DATA(busdev) \
- ((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data))
-
-#define SN_PCIDEV_INFO(dev) sn_pcidev_info_get(dev)
-
-/*
- * Given a pci_bus, return the sn pcibus_bussoft struct. Note that
- * this only works for root busses, not for busses represented by PPB's.
- */
-
-#define SN_PCIBUS_BUSSOFT(pci_bus) \
- ((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
-
-#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
- ((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
-/*
- * Given a struct pci_dev, return the sn pcibus_bussoft struct. Note
- * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due
- * due to possible PPB's in the path.
- */
-
-#define SN_PCIDEV_BUSSOFT(pci_dev) \
- (SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info)
-
-#define SN_PCIDEV_BUSPROVIDER(pci_dev) \
- (SN_PCIDEV_INFO(pci_dev)->pdi_provider)
-
-#define PCIIO_BUS_NONE 255 /* bus 255 reserved */
-#define PCIIO_SLOT_NONE 255
-#define PCIIO_FUNC_NONE 255
-#define PCIIO_VENDOR_ID_NONE (-1)
-
-struct pcidev_info {
- u64 pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */
- u64 pdi_slot_host_handle; /* Bus and devfn Host pci_dev */
-
- struct pcibus_bussoft *pdi_pcibus_info; /* Kernel common bus soft */
- struct pcidev_info *pdi_host_pcidev_info; /* Kernel Host pci_dev */
- struct pci_dev *pdi_linux_pcidev; /* Kernel pci_dev */
-
- struct sn_irq_info *pdi_sn_irq_info;
- struct sn_pcibus_provider *pdi_provider; /* sn pci ops */
- struct pci_dev *host_pci_dev; /* host bus link */
- struct list_head pdi_list; /* List of pcidev_info */
-};
-
-extern void sn_irq_fixup(struct pci_dev *pci_dev,
- struct sn_irq_info *sn_irq_info);
-extern void sn_irq_unfixup(struct pci_dev *pci_dev);
-extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *);
-extern void sn_bus_fixup(struct pci_bus *);
-extern void sn_acpi_bus_fixup(struct pci_bus *);
-extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *);
-extern void sn_bus_store_sysdata(struct pci_dev *dev);
-extern void sn_bus_free_sysdata(void);
-extern void sn_generate_path(struct pci_bus *pci_bus, char *address);
-extern void sn_io_slot_fixup(struct pci_dev *);
-extern void sn_acpi_slot_fixup(struct pci_dev *);
-extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *,
- struct sn_irq_info *);
-extern void sn_pci_unfixup_slot(struct pci_dev *dev);
-extern void sn_irq_lh_init(void);
-#endif /* _ASM_IA64_SN_PCI_PCIDEV_H */
diff --git a/arch/ia64/include/asm/sn/pda.h b/arch/ia64/include/asm/sn/pda.h
deleted file mode 100644
index 22ae358c8d16..000000000000
--- a/arch/ia64/include/asm/sn/pda.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PDA_H
-#define _ASM_IA64_SN_PDA_H
-
-#include <linux/cache.h>
-#include <asm/percpu.h>
-
-
-/*
- * CPU-specific data structure.
- *
- * One of these structures is allocated for each cpu of a NUMA system.
- *
- * This structure provides a convenient way of keeping together
- * all SN per-cpu data structures.
- */
-
-typedef struct pda_s {
-
- /*
- * Support for SN LEDs
- */
- volatile short *led_address;
- u8 led_state;
- u8 hb_state; /* supports blinking heartbeat leds */
- unsigned int hb_count;
-
- unsigned int idle_flag;
-
- volatile unsigned long *bedrock_rev_id;
- volatile unsigned long *pio_write_status_addr;
- unsigned long pio_write_status_val;
- volatile unsigned long *pio_shub_war_cam_addr;
-
- unsigned long sn_in_service_ivecs[4];
- int sn_lb_int_war_ticks;
- int sn_last_irq;
- int sn_first_irq;
-} pda_t;
-
-
-#define CACHE_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
-
-/*
- * PDA
- * Per-cpu private data area for each cpu. The PDA is located immediately after
- * the IA64 cpu_data area. A full page is allocated for the cp_data area for each
- * cpu but only a small amout of the page is actually used. We put the SNIA PDA
- * in the same page as the cpu_data area. Note that there is a check in the setup
- * code to verify that we don't overflow the page.
- *
- * Seems like we should should cache-line align the pda so that any changes in the
- * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
- * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
- */
-DECLARE_PER_CPU(struct pda_s, pda_percpu);
-
-#define pda (&__ia64_per_cpu_var(pda_percpu))
-
-#define pdacpu(cpu) (&per_cpu(pda_percpu, cpu))
-
-#endif /* _ASM_IA64_SN_PDA_H */
diff --git a/arch/ia64/include/asm/sn/pic.h b/arch/ia64/include/asm/sn/pic.h
deleted file mode 100644
index 5f9da5fd6e56..000000000000
--- a/arch/ia64/include/asm/sn/pic.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PIC_H
-#define _ASM_IA64_SN_PCI_PIC_H
-
-/*
- * PIC AS DEVICE ZERO
- * ------------------
- *
- * PIC handles PCI/X busses. PCI/X requires that the 'bridge' (i.e. PIC)
- * be designated as 'device 0'. That is a departure from earlier SGI
- * PCI bridges. Because of that we use config space 1 to access the
- * config space of the first actual PCI device on the bus.
- * Here's what the PIC manual says:
- *
- * The current PCI-X bus specification now defines that the parent
- * hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC
- * reduced the total number of devices from 8 to 4 and removed the
- * device registers and windows, now only supporting devices 0,1,2, and
- * 3. PIC did leave all 8 configuration space windows. The reason was
- * there was nothing to gain by removing them. Here in lies the problem.
- * The device numbering we do using 0 through 3 is unrelated to the device
- * numbering which PCI-X requires in configuration space. In the past we
- * correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc.
- * PCI-X requires we start a 1, not 0 and currently the PX brick
- * does associate our:
- *
- * device 0 with configuration space window 1,
- * device 1 with configuration space window 2,
- * device 2 with configuration space window 3,
- * device 3 with configuration space window 4.
- *
- * The net effect is that all config space access are off-by-one with
- * relation to other per-slot accesses on the PIC.
- * Here is a table that shows some of that:
- *
- * Internal Slot#
- * |
- * | 0 1 2 3
- * ----------|---------------------------------------
- * config | 0x21000 0x22000 0x23000 0x24000
- * |
- * even rrb | 0[0] n/a 1[0] n/a [] == implied even/odd
- * |
- * odd rrb | n/a 0[1] n/a 1[1]
- * |
- * int dev | 00 01 10 11
- * |
- * ext slot# | 1 2 3 4
- * ----------|---------------------------------------
- */
-
-#define PIC_ATE_TARGETID_SHFT 8
-#define PIC_HOST_INTR_ADDR 0x0000FFFFFFFFFFFFUL
-#define PIC_PCI64_ATTR_TARG_SHFT 60
-
-
-/*****************************************************************************
- *********************** PIC MMR structure mapping ***************************
- *****************************************************************************/
-
-/* NOTE: PIC WAR. PV#854697. PIC does not allow writes just to [31:0]
- * of a 64-bit register. When writing PIC registers, always write the
- * entire 64 bits.
- */
-
-struct pic {
-
- /* 0x000000-0x00FFFF -- Local Registers */
-
- /* 0x000000-0x000057 -- Standard Widget Configuration */
- u64 p_wid_id; /* 0x000000 */
- u64 p_wid_stat; /* 0x000008 */
- u64 p_wid_err_upper; /* 0x000010 */
- u64 p_wid_err_lower; /* 0x000018 */
- #define p_wid_err p_wid_err_lower
- u64 p_wid_control; /* 0x000020 */
- u64 p_wid_req_timeout; /* 0x000028 */
- u64 p_wid_int_upper; /* 0x000030 */
- u64 p_wid_int_lower; /* 0x000038 */
- #define p_wid_int p_wid_int_lower
- u64 p_wid_err_cmdword; /* 0x000040 */
- u64 p_wid_llp; /* 0x000048 */
- u64 p_wid_tflush; /* 0x000050 */
-
- /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */
- u64 p_wid_aux_err; /* 0x000058 */
- u64 p_wid_resp_upper; /* 0x000060 */
- u64 p_wid_resp_lower; /* 0x000068 */
- #define p_wid_resp p_wid_resp_lower
- u64 p_wid_tst_pin_ctrl; /* 0x000070 */
- u64 p_wid_addr_lkerr; /* 0x000078 */
-
- /* 0x000080-0x00008F -- PMU & MAP */
- u64 p_dir_map; /* 0x000080 */
- u64 _pad_000088; /* 0x000088 */
-
- /* 0x000090-0x00009F -- SSRAM */
- u64 p_map_fault; /* 0x000090 */
- u64 _pad_000098; /* 0x000098 */
-
- /* 0x0000A0-0x0000AF -- Arbitration */
- u64 p_arb; /* 0x0000A0 */
- u64 _pad_0000A8; /* 0x0000A8 */
-
- /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
- u64 p_ate_parity_err; /* 0x0000B0 */
- u64 _pad_0000B8; /* 0x0000B8 */
-
- /* 0x0000C0-0x0000FF -- PCI/GIO */
- u64 p_bus_timeout; /* 0x0000C0 */
- u64 p_pci_cfg; /* 0x0000C8 */
- u64 p_pci_err_upper; /* 0x0000D0 */
- u64 p_pci_err_lower; /* 0x0000D8 */
- #define p_pci_err p_pci_err_lower
- u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */
-
- /* 0x000100-0x0001FF -- Interrupt */
- u64 p_int_status; /* 0x000100 */
- u64 p_int_enable; /* 0x000108 */
- u64 p_int_rst_stat; /* 0x000110 */
- u64 p_int_mode; /* 0x000118 */
- u64 p_int_device; /* 0x000120 */
- u64 p_int_host_err; /* 0x000128 */
- u64 p_int_addr[8]; /* 0x0001{30,,,68} */
- u64 p_err_int_view; /* 0x000170 */
- u64 p_mult_int; /* 0x000178 */
- u64 p_force_always[8]; /* 0x0001{80,,,B8} */
- u64 p_force_pin[8]; /* 0x0001{C0,,,F8} */
-
- /* 0x000200-0x000298 -- Device */
- u64 p_device[4]; /* 0x0002{00,,,18} */
- u64 _pad_000220[4]; /* 0x0002{20,,,38} */
- u64 p_wr_req_buf[4]; /* 0x0002{40,,,58} */
- u64 _pad_000260[4]; /* 0x0002{60,,,78} */
- u64 p_rrb_map[2]; /* 0x0002{80,,,88} */
- #define p_even_resp p_rrb_map[0] /* 0x000280 */
- #define p_odd_resp p_rrb_map[1] /* 0x000288 */
- u64 p_resp_status; /* 0x000290 */
- u64 p_resp_clear; /* 0x000298 */
-
- u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */
-
- /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
- struct {
- u64 upper; /* 0x0003{00,,,F0} */
- u64 lower; /* 0x0003{08,,,F8} */
- } p_buf_addr_match[16];
-
- /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
- struct {
- u64 flush_w_touch; /* 0x000{400,,,5C0} */
- u64 flush_wo_touch; /* 0x000{408,,,5C8} */
- u64 inflight; /* 0x000{410,,,5D0} */
- u64 prefetch; /* 0x000{418,,,5D8} */
- u64 total_pci_retry; /* 0x000{420,,,5E0} */
- u64 max_pci_retry; /* 0x000{428,,,5E8} */
- u64 max_latency; /* 0x000{430,,,5F0} */
- u64 clear_all; /* 0x000{438,,,5F8} */
- } p_buf_count[8];
-
-
- /* 0x000600-0x0009FF -- PCI/X registers */
- u64 p_pcix_bus_err_addr; /* 0x000600 */
- u64 p_pcix_bus_err_attr; /* 0x000608 */
- u64 p_pcix_bus_err_data; /* 0x000610 */
- u64 p_pcix_pio_split_addr; /* 0x000618 */
- u64 p_pcix_pio_split_attr; /* 0x000620 */
- u64 p_pcix_dma_req_err_attr; /* 0x000628 */
- u64 p_pcix_dma_req_err_addr; /* 0x000630 */
- u64 p_pcix_timeout; /* 0x000638 */
-
- u64 _pad_000640[120]; /* 0x000{640,,,9F8} */
-
- /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
- struct {
- u64 p_buf_addr; /* 0x000{A00,,,AF0} */
- u64 p_buf_attr; /* 0X000{A08,,,AF8} */
- } p_pcix_read_buf_64[16];
-
- struct {
- u64 p_buf_addr; /* 0x000{B00,,,BE0} */
- u64 p_buf_attr; /* 0x000{B08,,,BE8} */
- u64 p_buf_valid; /* 0x000{B10,,,BF0} */
- u64 __pad1; /* 0x000{B18,,,BF8} */
- } p_pcix_write_buf_64[8];
-
- /* End of Local Registers -- Start of Address Map space */
-
- char _pad_000c00[0x010000 - 0x000c00];
-
- /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */
- u64 p_int_ate_ram[1024]; /* 0x010000-0x011fff */
-
- /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */
- u64 p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */
-
- char _pad_014000[0x18000 - 0x014000];
-
- /* 0x18000-0x197F8 -- PIC Write Request Ram */
- u64 p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */
- u64 p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */
- u64 p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */
-
- char _pad_019800[0x20000 - 0x019800];
-
- /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */
- union {
- u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */
- u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */
- u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */
- u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */
- union {
- u8 c[0x100 / 1];
- u16 s[0x100 / 2];
- u32 l[0x100 / 4];
- u64 d[0x100 / 8];
- } f[8];
- } p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */
-
- /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
- union {
- u8 c[0x1000 / 1]; /* 0x028000-0x029000 */
- u16 s[0x1000 / 2]; /* 0x028000-0x029000 */
- u32 l[0x1000 / 4]; /* 0x028000-0x029000 */
- u64 d[0x1000 / 8]; /* 0x028000-0x029000 */
- union {
- u8 c[0x100 / 1];
- u16 s[0x100 / 2];
- u32 l[0x100 / 4];
- u64 d[0x100 / 8];
- } f[8];
- } p_type1_cfg; /* 0x028000-0x029000 */
-
- char _pad_029000[0x030000-0x029000];
-
- /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
- union {
- u8 c[8 / 1];
- u16 s[8 / 2];
- u32 l[8 / 4];
- u64 d[8 / 8];
- } p_pci_iack; /* 0x030000-0x030007 */
-
- char _pad_030007[0x040000-0x030008];
-
- /* 0x040000-0x030007 -- PCIX Special Cycle */
- union {
- u8 c[8 / 1];
- u16 s[8 / 2];
- u32 l[8 / 4];
- u64 d[8 / 8];
- } p_pcix_cycle; /* 0x040000-0x040007 */
-};
-
-#endif /* _ASM_IA64_SN_PCI_PIC_H */
diff --git a/arch/ia64/include/asm/sn/rw_mmr.h b/arch/ia64/include/asm/sn/rw_mmr.h
deleted file mode 100644
index 2d78f4c5a45e..000000000000
--- a/arch/ia64/include/asm/sn/rw_mmr.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002-2006 Silicon Graphics, Inc. All Rights Reserved.
- */
-#ifndef _ASM_IA64_SN_RW_MMR_H
-#define _ASM_IA64_SN_RW_MMR_H
-
-
-/*
- * This file that access MMRs via uncached physical addresses.
- * pio_phys_read_mmr - read an MMR
- * pio_phys_write_mmr - write an MMR
- * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
- * Second MMR will be skipped if address is NULL
- *
- * Addresses passed to these routines should be uncached physical addresses
- * ie., 0x80000....
- */
-
-
-extern long pio_phys_read_mmr(volatile long *mmr);
-extern void pio_phys_write_mmr(volatile long *mmr, long val);
-extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2);
-
-#endif /* _ASM_IA64_SN_RW_MMR_H */
diff --git a/arch/ia64/include/asm/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h
deleted file mode 100644
index a84d870f4294..000000000000
--- a/arch/ia64/include/asm/sn/shub_mmr.h
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_SHUB_MMR_H
-#define _ASM_IA64_SN_SHUB_MMR_H
-
-/* ==================================================================== */
-/* Register "SH_IPI_INT" */
-/* SHub Inter-Processor Interrupt Registers */
-/* ==================================================================== */
-#define SH1_IPI_INT __IA64_UL_CONST(0x0000000110000380)
-#define SH2_IPI_INT __IA64_UL_CONST(0x0000000010000380)
-
-/* SH_IPI_INT_TYPE */
-/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_IPI_INT_TYPE_SHFT 0
-#define SH_IPI_INT_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
-
-/* SH_IPI_INT_AGT */
-/* Description: Agent, must be 0 for SHub */
-#define SH_IPI_INT_AGT_SHFT 3
-#define SH_IPI_INT_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
-
-/* SH_IPI_INT_PID */
-/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_IPI_INT_PID_SHFT 4
-#define SH_IPI_INT_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
-
-/* SH_IPI_INT_BASE */
-/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_IPI_INT_BASE_SHFT 21
-#define SH_IPI_INT_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
-
-/* SH_IPI_INT_IDX */
-/* Description: Targeted McKinley interrupt vector */
-#define SH_IPI_INT_IDX_SHFT 52
-#define SH_IPI_INT_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
-
-/* SH_IPI_INT_SEND */
-/* Description: Send Interrupt Message to PI, This generates a puls */
-#define SH_IPI_INT_SEND_SHFT 63
-#define SH_IPI_INT_SEND_MASK __IA64_UL_CONST(0x8000000000000000)
-
-/* ==================================================================== */
-/* Register "SH_EVENT_OCCURRED" */
-/* SHub Interrupt Event Occurred */
-/* ==================================================================== */
-#define SH1_EVENT_OCCURRED __IA64_UL_CONST(0x0000000110010000)
-#define SH1_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000110010008)
-#define SH2_EVENT_OCCURRED __IA64_UL_CONST(0x0000000010010000)
-#define SH2_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000010010008)
-
-/* ==================================================================== */
-/* Register "SH_PI_CAM_CONTROL" */
-/* CRB CAM MMR Access Control */
-/* ==================================================================== */
-#define SH1_PI_CAM_CONTROL __IA64_UL_CONST(0x0000000120050300)
-
-/* ==================================================================== */
-/* Register "SH_SHUB_ID" */
-/* SHub ID Number */
-/* ==================================================================== */
-#define SH1_SHUB_ID __IA64_UL_CONST(0x0000000110060580)
-#define SH1_SHUB_ID_REVISION_SHFT 28
-#define SH1_SHUB_ID_REVISION_MASK __IA64_UL_CONST(0x00000000f0000000)
-
-/* ==================================================================== */
-/* Register "SH_RTC" */
-/* Real-time Clock */
-/* ==================================================================== */
-#define SH1_RTC __IA64_UL_CONST(0x00000001101c0000)
-#define SH2_RTC __IA64_UL_CONST(0x00000002101c0000)
-#define SH_RTC_MASK __IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/* Register "SH_PIO_WRITE_STATUS_0|1" */
-/* PIO Write Status for CPU 0 & 1 */
-/* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000120070200)
-#define SH1_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000120070280)
-#define SH2_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000020070200)
-#define SH2_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000020070280)
-#define SH2_PIO_WRITE_STATUS_2 __IA64_UL_CONST(0x0000000020070300)
-#define SH2_PIO_WRITE_STATUS_3 __IA64_UL_CONST(0x0000000020070380)
-
-/* SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK */
-/* Description: Deadlock response detected */
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \
- __IA64_UL_CONST(0x0000000000000002)
-
-/* SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT */
-/* Description: Count of currently pending PIO writes */
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \
- __IA64_UL_CONST(0x3f00000000000000)
-
-/* ==================================================================== */
-/* Register "SH_PIO_WRITE_STATUS_0_ALIAS" */
-/* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000120070208)
-#define SH2_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000020070208)
-
-/* ==================================================================== */
-/* Register "SH_EVENT_OCCURRED" */
-/* SHub Interrupt Event Occurred */
-/* ==================================================================== */
-/* SH_EVENT_OCCURRED_UART_INT */
-/* Description: Pending Junk Bus UART Interrupt */
-#define SH_EVENT_OCCURRED_UART_INT_SHFT 20
-#define SH_EVENT_OCCURRED_UART_INT_MASK __IA64_UL_CONST(0x0000000000100000)
-
-/* SH_EVENT_OCCURRED_IPI_INT */
-/* Description: Pending IPI Interrupt */
-#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28
-#define SH_EVENT_OCCURRED_IPI_INT_MASK __IA64_UL_CONST(0x0000000010000000)
-
-/* SH_EVENT_OCCURRED_II_INT0 */
-/* Description: Pending II 0 Interrupt */
-#define SH_EVENT_OCCURRED_II_INT0_SHFT 29
-#define SH_EVENT_OCCURRED_II_INT0_MASK __IA64_UL_CONST(0x0000000020000000)
-
-/* SH_EVENT_OCCURRED_II_INT1 */
-/* Description: Pending II 1 Interrupt */
-#define SH_EVENT_OCCURRED_II_INT1_SHFT 30
-#define SH_EVENT_OCCURRED_II_INT1_MASK __IA64_UL_CONST(0x0000000040000000)
-
-/* SH2_EVENT_OCCURRED_EXTIO_INT2 */
-/* Description: Pending SHUB 2 EXT IO INT2 */
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT 33
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000)
-
-/* SH2_EVENT_OCCURRED_EXTIO_INT3 */
-/* Description: Pending SHUB 2 EXT IO INT3 */
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT 34
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000)
-
-#define SH_ALL_INT_MASK \
- (SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \
- SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \
- SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \
- SH2_EVENT_OCCURRED_EXTIO_INT3_MASK)
-
-
-/* ==================================================================== */
-/* LEDS */
-/* ==================================================================== */
-#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL
-#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL
-#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL
-#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL
-
-#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL
-#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL
-#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL
-#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL
-
-/* ==================================================================== */
-/* Register "SH1_PTC_0" */
-/* Puge Translation Cache Message Configuration Information */
-/* ==================================================================== */
-#define SH1_PTC_0 __IA64_UL_CONST(0x00000001101a0000)
-
-/* SH1_PTC_0_A */
-/* Description: Type */
-#define SH1_PTC_0_A_SHFT 0
-
-/* SH1_PTC_0_PS */
-/* Description: Page Size */
-#define SH1_PTC_0_PS_SHFT 2
-
-/* SH1_PTC_0_RID */
-/* Description: Region ID */
-#define SH1_PTC_0_RID_SHFT 8
-
-/* SH1_PTC_0_START */
-/* Description: Start */
-#define SH1_PTC_0_START_SHFT 63
-
-/* ==================================================================== */
-/* Register "SH1_PTC_1" */
-/* Puge Translation Cache Message Configuration Information */
-/* ==================================================================== */
-#define SH1_PTC_1 __IA64_UL_CONST(0x00000001101a0080)
-
-/* SH1_PTC_1_START */
-/* Description: PTC_1 Start */
-#define SH1_PTC_1_START_SHFT 63
-
-/* ==================================================================== */
-/* Register "SH2_PTC" */
-/* Puge Translation Cache Message Configuration Information */
-/* ==================================================================== */
-#define SH2_PTC __IA64_UL_CONST(0x0000000170000000)
-
-/* SH2_PTC_A */
-/* Description: Type */
-#define SH2_PTC_A_SHFT 0
-
-/* SH2_PTC_PS */
-/* Description: Page Size */
-#define SH2_PTC_PS_SHFT 2
-
-/* SH2_PTC_RID */
-/* Description: Region ID */
-#define SH2_PTC_RID_SHFT 4
-
-/* SH2_PTC_START */
-/* Description: Start */
-#define SH2_PTC_START_SHFT 63
-
-/* SH2_PTC_ADDR_RID */
-/* Description: Region ID */
-#define SH2_PTC_ADDR_SHFT 4
-#define SH2_PTC_ADDR_MASK __IA64_UL_CONST(0x1ffffffffffff000)
-
-/* ==================================================================== */
-/* Register "SH_RTC1_INT_CONFIG" */
-/* SHub RTC 1 Interrupt Config Registers */
-/* ==================================================================== */
-
-#define SH1_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000110001480)
-#define SH2_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000010001480)
-#define SH_RTC1_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff)
-#define SH_RTC1_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC1_INT_CONFIG_TYPE */
-/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0
-#define SH_RTC1_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
-
-/* SH_RTC1_INT_CONFIG_AGT */
-/* Description: Agent, must be 0 for SHub */
-#define SH_RTC1_INT_CONFIG_AGT_SHFT 3
-#define SH_RTC1_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
-
-/* SH_RTC1_INT_CONFIG_PID */
-/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_RTC1_INT_CONFIG_PID_SHFT 4
-#define SH_RTC1_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
-
-/* SH_RTC1_INT_CONFIG_BASE */
-/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_RTC1_INT_CONFIG_BASE_SHFT 21
-#define SH_RTC1_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
-
-/* SH_RTC1_INT_CONFIG_IDX */
-/* Description: Targeted McKinley interrupt vector */
-#define SH_RTC1_INT_CONFIG_IDX_SHFT 52
-#define SH_RTC1_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
-
-/* ==================================================================== */
-/* Register "SH_RTC1_INT_ENABLE" */
-/* SHub RTC 1 Interrupt Enable Registers */
-/* ==================================================================== */
-
-#define SH1_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000110001500)
-#define SH2_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000010001500)
-#define SH_RTC1_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001)
-#define SH_RTC1_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC1_INT_ENABLE_RTC1_ENABLE */
-/* Description: Enable RTC 1 Interrupt */
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \
- __IA64_UL_CONST(0x0000000000000001)
-
-/* ==================================================================== */
-/* Register "SH_RTC2_INT_CONFIG" */
-/* SHub RTC 2 Interrupt Config Registers */
-/* ==================================================================== */
-
-#define SH1_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000110001580)
-#define SH2_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000010001580)
-#define SH_RTC2_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff)
-#define SH_RTC2_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC2_INT_CONFIG_TYPE */
-/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0
-#define SH_RTC2_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
-
-/* SH_RTC2_INT_CONFIG_AGT */
-/* Description: Agent, must be 0 for SHub */
-#define SH_RTC2_INT_CONFIG_AGT_SHFT 3
-#define SH_RTC2_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
-
-/* SH_RTC2_INT_CONFIG_PID */
-/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_RTC2_INT_CONFIG_PID_SHFT 4
-#define SH_RTC2_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
-
-/* SH_RTC2_INT_CONFIG_BASE */
-/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_RTC2_INT_CONFIG_BASE_SHFT 21
-#define SH_RTC2_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
-
-/* SH_RTC2_INT_CONFIG_IDX */
-/* Description: Targeted McKinley interrupt vector */
-#define SH_RTC2_INT_CONFIG_IDX_SHFT 52
-#define SH_RTC2_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
-
-/* ==================================================================== */
-/* Register "SH_RTC2_INT_ENABLE" */
-/* SHub RTC 2 Interrupt Enable Registers */
-/* ==================================================================== */
-
-#define SH1_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000110001600)
-#define SH2_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000010001600)
-#define SH_RTC2_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001)
-#define SH_RTC2_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC2_INT_ENABLE_RTC2_ENABLE */
-/* Description: Enable RTC 2 Interrupt */
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \
- __IA64_UL_CONST(0x0000000000000001)
-
-/* ==================================================================== */
-/* Register "SH_RTC3_INT_CONFIG" */
-/* SHub RTC 3 Interrupt Config Registers */
-/* ==================================================================== */
-
-#define SH1_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000110001680)
-#define SH2_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000010001680)
-#define SH_RTC3_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff)
-#define SH_RTC3_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC3_INT_CONFIG_TYPE */
-/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0
-#define SH_RTC3_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
-
-/* SH_RTC3_INT_CONFIG_AGT */
-/* Description: Agent, must be 0 for SHub */
-#define SH_RTC3_INT_CONFIG_AGT_SHFT 3
-#define SH_RTC3_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
-
-/* SH_RTC3_INT_CONFIG_PID */
-/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_RTC3_INT_CONFIG_PID_SHFT 4
-#define SH_RTC3_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
-
-/* SH_RTC3_INT_CONFIG_BASE */
-/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_RTC3_INT_CONFIG_BASE_SHFT 21
-#define SH_RTC3_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
-
-/* SH_RTC3_INT_CONFIG_IDX */
-/* Description: Targeted McKinley interrupt vector */
-#define SH_RTC3_INT_CONFIG_IDX_SHFT 52
-#define SH_RTC3_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
-
-/* ==================================================================== */
-/* Register "SH_RTC3_INT_ENABLE" */
-/* SHub RTC 3 Interrupt Enable Registers */
-/* ==================================================================== */
-
-#define SH1_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000110001700)
-#define SH2_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000010001700)
-#define SH_RTC3_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001)
-#define SH_RTC3_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC3_INT_ENABLE_RTC3_ENABLE */
-/* Description: Enable RTC 3 Interrupt */
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \
- __IA64_UL_CONST(0x0000000000000001)
-
-/* SH_EVENT_OCCURRED_RTC1_INT */
-/* Description: Pending RTC 1 Interrupt */
-#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24
-#define SH_EVENT_OCCURRED_RTC1_INT_MASK __IA64_UL_CONST(0x0000000001000000)
-
-/* SH_EVENT_OCCURRED_RTC2_INT */
-/* Description: Pending RTC 2 Interrupt */
-#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25
-#define SH_EVENT_OCCURRED_RTC2_INT_MASK __IA64_UL_CONST(0x0000000002000000)
-
-/* SH_EVENT_OCCURRED_RTC3_INT */
-/* Description: Pending RTC 3 Interrupt */
-#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26
-#define SH_EVENT_OCCURRED_RTC3_INT_MASK __IA64_UL_CONST(0x0000000004000000)
-
-/* ==================================================================== */
-/* Register "SH_IPI_ACCESS" */
-/* CPU interrupt Access Permission Bits */
-/* ==================================================================== */
-
-#define SH1_IPI_ACCESS __IA64_UL_CONST(0x0000000110060480)
-#define SH2_IPI_ACCESS0 __IA64_UL_CONST(0x0000000010060c00)
-#define SH2_IPI_ACCESS1 __IA64_UL_CONST(0x0000000010060c80)
-#define SH2_IPI_ACCESS2 __IA64_UL_CONST(0x0000000010060d00)
-#define SH2_IPI_ACCESS3 __IA64_UL_CONST(0x0000000010060d80)
-
-/* ==================================================================== */
-/* Register "SH_INT_CMPB" */
-/* RTC Compare Value for Processor B */
-/* ==================================================================== */
-
-#define SH1_INT_CMPB __IA64_UL_CONST(0x00000001101b0080)
-#define SH2_INT_CMPB __IA64_UL_CONST(0x00000000101b0080)
-#define SH_INT_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff)
-#define SH_INT_CMPB_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_INT_CMPB_REAL_TIME_CMPB */
-/* Description: Real Time Clock Compare */
-#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
-#define SH_INT_CMPB_REAL_TIME_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/* Register "SH_INT_CMPC" */
-/* RTC Compare Value for Processor C */
-/* ==================================================================== */
-
-#define SH1_INT_CMPC __IA64_UL_CONST(0x00000001101b0100)
-#define SH2_INT_CMPC __IA64_UL_CONST(0x00000000101b0100)
-#define SH_INT_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff)
-#define SH_INT_CMPC_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_INT_CMPC_REAL_TIME_CMPC */
-/* Description: Real Time Clock Compare */
-#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
-#define SH_INT_CMPC_REAL_TIME_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/* Register "SH_INT_CMPD" */
-/* RTC Compare Value for Processor D */
-/* ==================================================================== */
-
-#define SH1_INT_CMPD __IA64_UL_CONST(0x00000001101b0180)
-#define SH2_INT_CMPD __IA64_UL_CONST(0x00000000101b0180)
-#define SH_INT_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff)
-#define SH_INT_CMPD_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_INT_CMPD_REAL_TIME_CMPD */
-/* Description: Real Time Clock Compare */
-#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
-#define SH_INT_CMPD_REAL_TIME_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/* Register "SH_MD_DQLP_MMR_DIR_PRIVEC0" */
-/* privilege vector for acc=0 */
-/* ==================================================================== */
-#define SH1_MD_DQLP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100030300)
-
-/* ==================================================================== */
-/* Register "SH_MD_DQRP_MMR_DIR_PRIVEC0" */
-/* privilege vector for acc=0 */
-/* ==================================================================== */
-#define SH1_MD_DQRP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100050300)
-
-/* ==================================================================== */
-/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
-/* and SHUB2 that it makes sense to define a geberic name for the MMR. */
-/* It is acceptable to use (for example) SH_IPI_INT to reference the */
-/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */
-/* on the type of the SHUB. Do not use these #defines in performance */
-/* critical code or loops - there is a small performance penalty. */
-/* ==================================================================== */
-#define shubmmr(a,b) (is_shub2() ? a##2_##b : a##1_##b)
-
-#define SH_REAL_JUNK_BUS_LED0 shubmmr(SH, REAL_JUNK_BUS_LED0)
-#define SH_IPI_INT shubmmr(SH, IPI_INT)
-#define SH_EVENT_OCCURRED shubmmr(SH, EVENT_OCCURRED)
-#define SH_EVENT_OCCURRED_ALIAS shubmmr(SH, EVENT_OCCURRED_ALIAS)
-#define SH_RTC shubmmr(SH, RTC)
-#define SH_RTC1_INT_CONFIG shubmmr(SH, RTC1_INT_CONFIG)
-#define SH_RTC1_INT_ENABLE shubmmr(SH, RTC1_INT_ENABLE)
-#define SH_RTC2_INT_CONFIG shubmmr(SH, RTC2_INT_CONFIG)
-#define SH_RTC2_INT_ENABLE shubmmr(SH, RTC2_INT_ENABLE)
-#define SH_RTC3_INT_CONFIG shubmmr(SH, RTC3_INT_CONFIG)
-#define SH_RTC3_INT_ENABLE shubmmr(SH, RTC3_INT_ENABLE)
-#define SH_INT_CMPB shubmmr(SH, INT_CMPB)
-#define SH_INT_CMPC shubmmr(SH, INT_CMPC)
-#define SH_INT_CMPD shubmmr(SH, INT_CMPD)
-
-/* ========================================================================== */
-/* Register "SH2_BT_ENG_CSR_0" */
-/* Engine 0 Control and Status Register */
-/* ========================================================================== */
-
-#define SH2_BT_ENG_CSR_0 __IA64_UL_CONST(0x0000000030040000)
-#define SH2_BT_ENG_SRC_ADDR_0 __IA64_UL_CONST(0x0000000030040080)
-#define SH2_BT_ENG_DEST_ADDR_0 __IA64_UL_CONST(0x0000000030040100)
-#define SH2_BT_ENG_NOTIF_ADDR_0 __IA64_UL_CONST(0x0000000030040180)
-
-/* ========================================================================== */
-/* BTE interfaces 1-3 */
-/* ========================================================================== */
-
-#define SH2_BT_ENG_CSR_1 __IA64_UL_CONST(0x0000000030050000)
-#define SH2_BT_ENG_CSR_2 __IA64_UL_CONST(0x0000000030060000)
-#define SH2_BT_ENG_CSR_3 __IA64_UL_CONST(0x0000000030070000)
-
-#endif /* _ASM_IA64_SN_SHUB_MMR_H */
diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
deleted file mode 100644
index 8a1ec139f977..000000000000
--- a/arch/ia64/include/asm/sn/shubio.h
+++ /dev/null
@@ -1,3358 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_SHUBIO_H
-#define _ASM_IA64_SN_SHUBIO_H
-
-#define HUB_WIDGET_ID_MAX 0xf
-#define IIO_NUM_ITTES 7
-#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1)
-
-#define IIO_WID 0x00400000 /* Crosstalk Widget Identification */
- /* This register is also accessible from
- * Crosstalk at address 0x0. */
-#define IIO_WSTAT 0x00400008 /* Crosstalk Widget Status */
-#define IIO_WCR 0x00400020 /* Crosstalk Widget Control Register */
-#define IIO_ILAPR 0x00400100 /* IO Local Access Protection Register */
-#define IIO_ILAPO 0x00400108 /* IO Local Access Protection Override */
-#define IIO_IOWA 0x00400110 /* IO Outbound Widget Access */
-#define IIO_IIWA 0x00400118 /* IO Inbound Widget Access */
-#define IIO_IIDEM 0x00400120 /* IO Inbound Device Error Mask */
-#define IIO_ILCSR 0x00400128 /* IO LLP Control and Status Register */
-#define IIO_ILLR 0x00400130 /* IO LLP Log Register */
-#define IIO_IIDSR 0x00400138 /* IO Interrupt Destination */
-
-#define IIO_IGFX0 0x00400140 /* IO Graphics Node-Widget Map 0 */
-#define IIO_IGFX1 0x00400148 /* IO Graphics Node-Widget Map 1 */
-
-#define IIO_ISCR0 0x00400150 /* IO Scratch Register 0 */
-#define IIO_ISCR1 0x00400158 /* IO Scratch Register 1 */
-
-#define IIO_ITTE1 0x00400160 /* IO Translation Table Entry 1 */
-#define IIO_ITTE2 0x00400168 /* IO Translation Table Entry 2 */
-#define IIO_ITTE3 0x00400170 /* IO Translation Table Entry 3 */
-#define IIO_ITTE4 0x00400178 /* IO Translation Table Entry 4 */
-#define IIO_ITTE5 0x00400180 /* IO Translation Table Entry 5 */
-#define IIO_ITTE6 0x00400188 /* IO Translation Table Entry 6 */
-#define IIO_ITTE7 0x00400190 /* IO Translation Table Entry 7 */
-
-#define IIO_IPRB0 0x00400198 /* IO PRB Entry 0 */
-#define IIO_IPRB8 0x004001A0 /* IO PRB Entry 8 */
-#define IIO_IPRB9 0x004001A8 /* IO PRB Entry 9 */
-#define IIO_IPRBA 0x004001B0 /* IO PRB Entry A */
-#define IIO_IPRBB 0x004001B8 /* IO PRB Entry B */
-#define IIO_IPRBC 0x004001C0 /* IO PRB Entry C */
-#define IIO_IPRBD 0x004001C8 /* IO PRB Entry D */
-#define IIO_IPRBE 0x004001D0 /* IO PRB Entry E */
-#define IIO_IPRBF 0x004001D8 /* IO PRB Entry F */
-
-#define IIO_IXCC 0x004001E0 /* IO Crosstalk Credit Count Timeout */
-#define IIO_IMEM 0x004001E8 /* IO Miscellaneous Error Mask */
-#define IIO_IXTT 0x004001F0 /* IO Crosstalk Timeout Threshold */
-#define IIO_IECLR 0x004001F8 /* IO Error Clear Register */
-#define IIO_IBCR 0x00400200 /* IO BTE Control Register */
-
-#define IIO_IXSM 0x00400208 /* IO Crosstalk Spurious Message */
-#define IIO_IXSS 0x00400210 /* IO Crosstalk Spurious Sideband */
-
-#define IIO_ILCT 0x00400218 /* IO LLP Channel Test */
-
-#define IIO_IIEPH1 0x00400220 /* IO Incoming Error Packet Header, Part 1 */
-#define IIO_IIEPH2 0x00400228 /* IO Incoming Error Packet Header, Part 2 */
-
-#define IIO_ISLAPR 0x00400230 /* IO SXB Local Access Protection Regster */
-#define IIO_ISLAPO 0x00400238 /* IO SXB Local Access Protection Override */
-
-#define IIO_IWI 0x00400240 /* IO Wrapper Interrupt Register */
-#define IIO_IWEL 0x00400248 /* IO Wrapper Error Log Register */
-#define IIO_IWC 0x00400250 /* IO Wrapper Control Register */
-#define IIO_IWS 0x00400258 /* IO Wrapper Status Register */
-#define IIO_IWEIM 0x00400260 /* IO Wrapper Error Interrupt Masking Register */
-
-#define IIO_IPCA 0x00400300 /* IO PRB Counter Adjust */
-
-#define IIO_IPRTE0_A 0x00400308 /* IO PIO Read Address Table Entry 0, Part A */
-#define IIO_IPRTE1_A 0x00400310 /* IO PIO Read Address Table Entry 1, Part A */
-#define IIO_IPRTE2_A 0x00400318 /* IO PIO Read Address Table Entry 2, Part A */
-#define IIO_IPRTE3_A 0x00400320 /* IO PIO Read Address Table Entry 3, Part A */
-#define IIO_IPRTE4_A 0x00400328 /* IO PIO Read Address Table Entry 4, Part A */
-#define IIO_IPRTE5_A 0x00400330 /* IO PIO Read Address Table Entry 5, Part A */
-#define IIO_IPRTE6_A 0x00400338 /* IO PIO Read Address Table Entry 6, Part A */
-#define IIO_IPRTE7_A 0x00400340 /* IO PIO Read Address Table Entry 7, Part A */
-
-#define IIO_IPRTE0_B 0x00400348 /* IO PIO Read Address Table Entry 0, Part B */
-#define IIO_IPRTE1_B 0x00400350 /* IO PIO Read Address Table Entry 1, Part B */
-#define IIO_IPRTE2_B 0x00400358 /* IO PIO Read Address Table Entry 2, Part B */
-#define IIO_IPRTE3_B 0x00400360 /* IO PIO Read Address Table Entry 3, Part B */
-#define IIO_IPRTE4_B 0x00400368 /* IO PIO Read Address Table Entry 4, Part B */
-#define IIO_IPRTE5_B 0x00400370 /* IO PIO Read Address Table Entry 5, Part B */
-#define IIO_IPRTE6_B 0x00400378 /* IO PIO Read Address Table Entry 6, Part B */
-#define IIO_IPRTE7_B 0x00400380 /* IO PIO Read Address Table Entry 7, Part B */
-
-#define IIO_IPDR 0x00400388 /* IO PIO Deallocation Register */
-#define IIO_ICDR 0x00400390 /* IO CRB Entry Deallocation Register */
-#define IIO_IFDR 0x00400398 /* IO IOQ FIFO Depth Register */
-#define IIO_IIAP 0x004003A0 /* IO IIQ Arbitration Parameters */
-#define IIO_ICMR 0x004003A8 /* IO CRB Management Register */
-#define IIO_ICCR 0x004003B0 /* IO CRB Control Register */
-#define IIO_ICTO 0x004003B8 /* IO CRB Timeout */
-#define IIO_ICTP 0x004003C0 /* IO CRB Timeout Prescalar */
-
-#define IIO_ICRB0_A 0x00400400 /* IO CRB Entry 0_A */
-#define IIO_ICRB0_B 0x00400408 /* IO CRB Entry 0_B */
-#define IIO_ICRB0_C 0x00400410 /* IO CRB Entry 0_C */
-#define IIO_ICRB0_D 0x00400418 /* IO CRB Entry 0_D */
-#define IIO_ICRB0_E 0x00400420 /* IO CRB Entry 0_E */
-
-#define IIO_ICRB1_A 0x00400430 /* IO CRB Entry 1_A */
-#define IIO_ICRB1_B 0x00400438 /* IO CRB Entry 1_B */
-#define IIO_ICRB1_C 0x00400440 /* IO CRB Entry 1_C */
-#define IIO_ICRB1_D 0x00400448 /* IO CRB Entry 1_D */
-#define IIO_ICRB1_E 0x00400450 /* IO CRB Entry 1_E */
-
-#define IIO_ICRB2_A 0x00400460 /* IO CRB Entry 2_A */
-#define IIO_ICRB2_B 0x00400468 /* IO CRB Entry 2_B */
-#define IIO_ICRB2_C 0x00400470 /* IO CRB Entry 2_C */
-#define IIO_ICRB2_D 0x00400478 /* IO CRB Entry 2_D */
-#define IIO_ICRB2_E 0x00400480 /* IO CRB Entry 2_E */
-
-#define IIO_ICRB3_A 0x00400490 /* IO CRB Entry 3_A */
-#define IIO_ICRB3_B 0x00400498 /* IO CRB Entry 3_B */
-#define IIO_ICRB3_C 0x004004a0 /* IO CRB Entry 3_C */
-#define IIO_ICRB3_D 0x004004a8 /* IO CRB Entry 3_D */
-#define IIO_ICRB3_E 0x004004b0 /* IO CRB Entry 3_E */
-
-#define IIO_ICRB4_A 0x004004c0 /* IO CRB Entry 4_A */
-#define IIO_ICRB4_B 0x004004c8 /* IO CRB Entry 4_B */
-#define IIO_ICRB4_C 0x004004d0 /* IO CRB Entry 4_C */
-#define IIO_ICRB4_D 0x004004d8 /* IO CRB Entry 4_D */
-#define IIO_ICRB4_E 0x004004e0 /* IO CRB Entry 4_E */
-
-#define IIO_ICRB5_A 0x004004f0 /* IO CRB Entry 5_A */
-#define IIO_ICRB5_B 0x004004f8 /* IO CRB Entry 5_B */
-#define IIO_ICRB5_C 0x00400500 /* IO CRB Entry 5_C */
-#define IIO_ICRB5_D 0x00400508 /* IO CRB Entry 5_D */
-#define IIO_ICRB5_E 0x00400510 /* IO CRB Entry 5_E */
-
-#define IIO_ICRB6_A 0x00400520 /* IO CRB Entry 6_A */
-#define IIO_ICRB6_B 0x00400528 /* IO CRB Entry 6_B */
-#define IIO_ICRB6_C 0x00400530 /* IO CRB Entry 6_C */
-#define IIO_ICRB6_D 0x00400538 /* IO CRB Entry 6_D */
-#define IIO_ICRB6_E 0x00400540 /* IO CRB Entry 6_E */
-
-#define IIO_ICRB7_A 0x00400550 /* IO CRB Entry 7_A */
-#define IIO_ICRB7_B 0x00400558 /* IO CRB Entry 7_B */
-#define IIO_ICRB7_C 0x00400560 /* IO CRB Entry 7_C */
-#define IIO_ICRB7_D 0x00400568 /* IO CRB Entry 7_D */
-#define IIO_ICRB7_E 0x00400570 /* IO CRB Entry 7_E */
-
-#define IIO_ICRB8_A 0x00400580 /* IO CRB Entry 8_A */
-#define IIO_ICRB8_B 0x00400588 /* IO CRB Entry 8_B */
-#define IIO_ICRB8_C 0x00400590 /* IO CRB Entry 8_C */
-#define IIO_ICRB8_D 0x00400598 /* IO CRB Entry 8_D */
-#define IIO_ICRB8_E 0x004005a0 /* IO CRB Entry 8_E */
-
-#define IIO_ICRB9_A 0x004005b0 /* IO CRB Entry 9_A */
-#define IIO_ICRB9_B 0x004005b8 /* IO CRB Entry 9_B */
-#define IIO_ICRB9_C 0x004005c0 /* IO CRB Entry 9_C */
-#define IIO_ICRB9_D 0x004005c8 /* IO CRB Entry 9_D */
-#define IIO_ICRB9_E 0x004005d0 /* IO CRB Entry 9_E */
-
-#define IIO_ICRBA_A 0x004005e0 /* IO CRB Entry A_A */
-#define IIO_ICRBA_B 0x004005e8 /* IO CRB Entry A_B */
-#define IIO_ICRBA_C 0x004005f0 /* IO CRB Entry A_C */
-#define IIO_ICRBA_D 0x004005f8 /* IO CRB Entry A_D */
-#define IIO_ICRBA_E 0x00400600 /* IO CRB Entry A_E */
-
-#define IIO_ICRBB_A 0x00400610 /* IO CRB Entry B_A */
-#define IIO_ICRBB_B 0x00400618 /* IO CRB Entry B_B */
-#define IIO_ICRBB_C 0x00400620 /* IO CRB Entry B_C */
-#define IIO_ICRBB_D 0x00400628 /* IO CRB Entry B_D */
-#define IIO_ICRBB_E 0x00400630 /* IO CRB Entry B_E */
-
-#define IIO_ICRBC_A 0x00400640 /* IO CRB Entry C_A */
-#define IIO_ICRBC_B 0x00400648 /* IO CRB Entry C_B */
-#define IIO_ICRBC_C 0x00400650 /* IO CRB Entry C_C */
-#define IIO_ICRBC_D 0x00400658 /* IO CRB Entry C_D */
-#define IIO_ICRBC_E 0x00400660 /* IO CRB Entry C_E */
-
-#define IIO_ICRBD_A 0x00400670 /* IO CRB Entry D_A */
-#define IIO_ICRBD_B 0x00400678 /* IO CRB Entry D_B */
-#define IIO_ICRBD_C 0x00400680 /* IO CRB Entry D_C */
-#define IIO_ICRBD_D 0x00400688 /* IO CRB Entry D_D */
-#define IIO_ICRBD_E 0x00400690 /* IO CRB Entry D_E */
-
-#define IIO_ICRBE_A 0x004006a0 /* IO CRB Entry E_A */
-#define IIO_ICRBE_B 0x004006a8 /* IO CRB Entry E_B */
-#define IIO_ICRBE_C 0x004006b0 /* IO CRB Entry E_C */
-#define IIO_ICRBE_D 0x004006b8 /* IO CRB Entry E_D */
-#define IIO_ICRBE_E 0x004006c0 /* IO CRB Entry E_E */
-
-#define IIO_ICSML 0x00400700 /* IO CRB Spurious Message Low */
-#define IIO_ICSMM 0x00400708 /* IO CRB Spurious Message Middle */
-#define IIO_ICSMH 0x00400710 /* IO CRB Spurious Message High */
-
-#define IIO_IDBSS 0x00400718 /* IO Debug Submenu Select */
-
-#define IIO_IBLS0 0x00410000 /* IO BTE Length Status 0 */
-#define IIO_IBSA0 0x00410008 /* IO BTE Source Address 0 */
-#define IIO_IBDA0 0x00410010 /* IO BTE Destination Address 0 */
-#define IIO_IBCT0 0x00410018 /* IO BTE Control Terminate 0 */
-#define IIO_IBNA0 0x00410020 /* IO BTE Notification Address 0 */
-#define IIO_IBIA0 0x00410028 /* IO BTE Interrupt Address 0 */
-#define IIO_IBLS1 0x00420000 /* IO BTE Length Status 1 */
-#define IIO_IBSA1 0x00420008 /* IO BTE Source Address 1 */
-#define IIO_IBDA1 0x00420010 /* IO BTE Destination Address 1 */
-#define IIO_IBCT1 0x00420018 /* IO BTE Control Terminate 1 */
-#define IIO_IBNA1 0x00420020 /* IO BTE Notification Address 1 */
-#define IIO_IBIA1 0x00420028 /* IO BTE Interrupt Address 1 */
-
-#define IIO_IPCR 0x00430000 /* IO Performance Control */
-#define IIO_IPPR 0x00430008 /* IO Performance Profiling */
-
-/************************************************************************
- * *
- * Description: This register echoes some information from the *
- * LB_REV_ID register. It is available through Crosstalk as described *
- * above. The REV_NUM and MFG_NUM fields receive their values from *
- * the REVISION and MANUFACTURER fields in the LB_REV_ID register. *
- * The PART_NUM field's value is the Crosstalk device ID number that *
- * Steve Miller assigned to the SHub chip. *
- * *
- ************************************************************************/
-
-typedef union ii_wid_u {
- u64 ii_wid_regval;
- struct {
- u64 w_rsvd_1:1;
- u64 w_mfg_num:11;
- u64 w_part_num:16;
- u64 w_rev_num:4;
- u64 w_rsvd:32;
- } ii_wid_fld_s;
-} ii_wid_u_t;
-
-/************************************************************************
- * *
- * The fields in this register are set upon detection of an error *
- * and cleared by various mechanisms, as explained in the *
- * description. *
- * *
- ************************************************************************/
-
-typedef union ii_wstat_u {
- u64 ii_wstat_regval;
- struct {
- u64 w_pending:4;
- u64 w_xt_crd_to:1;
- u64 w_xt_tail_to:1;
- u64 w_rsvd_3:3;
- u64 w_tx_mx_rty:1;
- u64 w_rsvd_2:6;
- u64 w_llp_tx_cnt:8;
- u64 w_rsvd_1:8;
- u64 w_crazy:1;
- u64 w_rsvd:31;
- } ii_wstat_fld_s;
-} ii_wstat_u_t;
-
-/************************************************************************
- * *
- * Description: This is a read-write enabled register. It controls *
- * various aspects of the Crosstalk flow control. *
- * *
- ************************************************************************/
-
-typedef union ii_wcr_u {
- u64 ii_wcr_regval;
- struct {
- u64 w_wid:4;
- u64 w_tag:1;
- u64 w_rsvd_1:8;
- u64 w_dst_crd:3;
- u64 w_f_bad_pkt:1;
- u64 w_dir_con:1;
- u64 w_e_thresh:5;
- u64 w_rsvd:41;
- } ii_wcr_fld_s;
-} ii_wcr_u_t;
-
-/************************************************************************
- * *
- * Description: This register's value is a bit vector that guards *
- * access to local registers within the II as well as to external *
- * Crosstalk widgets. Each bit in the register corresponds to a *
- * particular region in the system; a region consists of one, two or *
- * four nodes (depending on the value of the REGION_SIZE field in the *
- * LB_REV_ID register, which is documented in Section 8.3.1.1). The *
- * protection provided by this register applies to PIO read *
- * operations as well as PIO write operations. The II will perform a *
- * PIO read or write request only if the bit for the requestor's *
- * region is set; otherwise, the II will not perform the requested *
- * operation and will return an error response. When a PIO read or *
- * write request targets an external Crosstalk widget, then not only *
- * must the bit for the requestor's region be set in the ILAPR, but *
- * also the target widget's bit in the IOWA register must be set in *
- * order for the II to perform the requested operation; otherwise, *
- * the II will return an error response. Hence, the protection *
- * provided by the IOWA register supplements the protection provided *
- * by the ILAPR for requests that target external Crosstalk widgets. *
- * This register itself can be accessed only by the nodes whose *
- * region ID bits are enabled in this same register. It can also be *
- * accessed through the IAlias space by the local processors. *
- * The reset value of this register allows access by all nodes. *
- * *
- ************************************************************************/
-
-typedef union ii_ilapr_u {
- u64 ii_ilapr_regval;
- struct {
- u64 i_region:64;
- } ii_ilapr_fld_s;
-} ii_ilapr_u_t;
-
-/************************************************************************
- * *
- * Description: A write to this register of the 64-bit value *
- * "SGIrules" in ASCII, will cause the bit in the ILAPR register *
- * corresponding to the region of the requestor to be set (allow *
- * access). A write of any other value will be ignored. Access *
- * protection for this register is "SGIrules". *
- * This register can also be accessed through the IAlias space. *
- * However, this access will not change the access permissions in the *
- * ILAPR. *
- * *
- ************************************************************************/
-
-typedef union ii_ilapo_u {
- u64 ii_ilapo_regval;
- struct {
- u64 i_io_ovrride:64;
- } ii_ilapo_fld_s;
-} ii_ilapo_u_t;
-
-/************************************************************************
- * *
- * This register qualifies all the PIO and Graphics writes launched *
- * from the SHUB towards a widget. *
- * *
- ************************************************************************/
-
-typedef union ii_iowa_u {
- u64 ii_iowa_regval;
- struct {
- u64 i_w0_oac:1;
- u64 i_rsvd_1:7;
- u64 i_wx_oac:8;
- u64 i_rsvd:48;
- } ii_iowa_fld_s;
-} ii_iowa_u_t;
-
-/************************************************************************
- * *
- * Description: This register qualifies all the requests launched *
- * from a widget towards the Shub. This register is intended to be *
- * used by software in case of misbehaving widgets. *
- * *
- * *
- ************************************************************************/
-
-typedef union ii_iiwa_u {
- u64 ii_iiwa_regval;
- struct {
- u64 i_w0_iac:1;
- u64 i_rsvd_1:7;
- u64 i_wx_iac:8;
- u64 i_rsvd:48;
- } ii_iiwa_fld_s;
-} ii_iiwa_u_t;
-
-/************************************************************************
- * *
- * Description: This register qualifies all the operations launched *
- * from a widget towards the SHub. It allows individual access *
- * control for up to 8 devices per widget. A device refers to *
- * individual DMA master hosted by a widget. *
- * The bits in each field of this register are cleared by the Shub *
- * upon detection of an error which requires the device to be *
- * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric *
- * Crosstalk). Whether or not a device has access rights to this *
- * Shub is determined by an AND of the device enable bit in the *
- * appropriate field of this register and the corresponding bit in *
- * the Wx_IAC field (for the widget which this device belongs to). *
- * The bits in this field are set by writing a 1 to them. Incoming *
- * replies from Crosstalk are not subject to this access control *
- * mechanism. *
- * *
- ************************************************************************/
-
-typedef union ii_iidem_u {
- u64 ii_iidem_regval;
- struct {
- u64 i_w8_dxs:8;
- u64 i_w9_dxs:8;
- u64 i_wa_dxs:8;
- u64 i_wb_dxs:8;
- u64 i_wc_dxs:8;
- u64 i_wd_dxs:8;
- u64 i_we_dxs:8;
- u64 i_wf_dxs:8;
- } ii_iidem_fld_s;
-} ii_iidem_u_t;
-
-/************************************************************************
- * *
- * This register contains the various programmable fields necessary *
- * for controlling and observing the LLP signals. *
- * *
- ************************************************************************/
-
-typedef union ii_ilcsr_u {
- u64 ii_ilcsr_regval;
- struct {
- u64 i_nullto:6;
- u64 i_rsvd_4:2;
- u64 i_wrmrst:1;
- u64 i_rsvd_3:1;
- u64 i_llp_en:1;
- u64 i_bm8:1;
- u64 i_llp_stat:2;
- u64 i_remote_power:1;
- u64 i_rsvd_2:1;
- u64 i_maxrtry:10;
- u64 i_d_avail_sel:2;
- u64 i_rsvd_1:4;
- u64 i_maxbrst:10;
- u64 i_rsvd:22;
-
- } ii_ilcsr_fld_s;
-} ii_ilcsr_u_t;
-
-/************************************************************************
- * *
- * This is simply a status registers that monitors the LLP error *
- * rate. *
- * *
- ************************************************************************/
-
-typedef union ii_illr_u {
- u64 ii_illr_regval;
- struct {
- u64 i_sn_cnt:16;
- u64 i_cb_cnt:16;
- u64 i_rsvd:32;
- } ii_illr_fld_s;
-} ii_illr_u_t;
-
-/************************************************************************
- * *
- * Description: All II-detected non-BTE error interrupts are *
- * specified via this register. *
- * NOTE: The PI interrupt register address is hardcoded in the II. If *
- * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI *
- * packet) to address offset 0x0180_0090 within the local register *
- * address space of PI0 on the node specified by the NODE field. If *
- * PI_ID==1, then the II sends the interrupt request to address *
- * offset 0x01A0_0090 within the local register address space of PI1 *
- * on the node specified by the NODE field. *
- * *
- ************************************************************************/
-
-typedef union ii_iidsr_u {
- u64 ii_iidsr_regval;
- struct {
- u64 i_level:8;
- u64 i_pi_id:1;
- u64 i_node:11;
- u64 i_rsvd_3:4;
- u64 i_enable:1;
- u64 i_rsvd_2:3;
- u64 i_int_sent:2;
- u64 i_rsvd_1:2;
- u64 i_pi0_forward_int:1;
- u64 i_pi1_forward_int:1;
- u64 i_rsvd:30;
- } ii_iidsr_fld_s;
-} ii_iidsr_u_t;
-
-/************************************************************************
- * *
- * There are two instances of this register. This register is used *
- * for matching up the incoming responses from the graphics widget to *
- * the processor that initiated the graphics operation. The *
- * write-responses are converted to graphics credits and returned to *
- * the processor so that the processor interface can manage the flow *
- * control. *
- * *
- ************************************************************************/
-
-typedef union ii_igfx0_u {
- u64 ii_igfx0_regval;
- struct {
- u64 i_w_num:4;
- u64 i_pi_id:1;
- u64 i_n_num:12;
- u64 i_p_num:1;
- u64 i_rsvd:46;
- } ii_igfx0_fld_s;
-} ii_igfx0_u_t;
-
-/************************************************************************
- * *
- * There are two instances of this register. This register is used *
- * for matching up the incoming responses from the graphics widget to *
- * the processor that initiated the graphics operation. The *
- * write-responses are converted to graphics credits and returned to *
- * the processor so that the processor interface can manage the flow *
- * control. *
- * *
- ************************************************************************/
-
-typedef union ii_igfx1_u {
- u64 ii_igfx1_regval;
- struct {
- u64 i_w_num:4;
- u64 i_pi_id:1;
- u64 i_n_num:12;
- u64 i_p_num:1;
- u64 i_rsvd:46;
- } ii_igfx1_fld_s;
-} ii_igfx1_u_t;
-
-/************************************************************************
- * *
- * There are two instances of this registers. These registers are *
- * used as scratch registers for software use. *
- * *
- ************************************************************************/
-
-typedef union ii_iscr0_u {
- u64 ii_iscr0_regval;
- struct {
- u64 i_scratch:64;
- } ii_iscr0_fld_s;
-} ii_iscr0_u_t;
-
-/************************************************************************
- * *
- * There are two instances of this registers. These registers are *
- * used as scratch registers for software use. *
- * *
- ************************************************************************/
-
-typedef union ii_iscr1_u {
- u64 ii_iscr1_regval;
- struct {
- u64 i_scratch:64;
- } ii_iscr1_fld_s;
-} ii_iscr1_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the SHub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the Shub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte1_u {
- u64 ii_itte1_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte1_fld_s;
-} ii_itte1_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the Shub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte2_u {
- u64 ii_itte2_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte2_fld_s;
-} ii_itte2_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the SHub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte3_u {
- u64 ii_itte3_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte3_fld_s;
-} ii_itte3_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a SHub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the SHub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the SHub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte4_u {
- u64 ii_itte4_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte4_fld_s;
-} ii_itte4_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a SHub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the Shub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte5_u {
- u64 ii_itte5_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte5_fld_s;
-} ii_itte5_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the Shub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte6_u {
- u64 ii_itte6_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte6_fld_s;
-} ii_itte6_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the SHub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte7_u {
- u64 ii_itte7_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte7_fld_s;
-} ii_itte7_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprb0_u {
- u64 ii_iprb0_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprb0_fld_s;
-} ii_iprb0_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprb8_u {
- u64 ii_iprb8_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprb8_fld_s;
-} ii_iprb8_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprb9_u {
- u64 ii_iprb9_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprb9_fld_s;
-} ii_iprb9_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * *
- * *
- ************************************************************************/
-
-typedef union ii_iprba_u {
- u64 ii_iprba_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprba_fld_s;
-} ii_iprba_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbb_u {
- u64 ii_iprbb_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbb_fld_s;
-} ii_iprbb_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbc_u {
- u64 ii_iprbc_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbc_fld_s;
-} ii_iprbc_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbd_u {
- u64 ii_iprbd_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbd_fld_s;
-} ii_iprbd_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbe_u {
- u64 ii_iprbe_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbe_fld_s;
-} ii_iprbe_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of Shub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbf_u {
- u64 ii_iprbf_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbe_fld_s;
-} ii_iprbf_u_t;
-
-/************************************************************************
- * *
- * This register specifies the timeout value to use for monitoring *
- * Crosstalk credits which are used outbound to Crosstalk. An *
- * internal counter called the Crosstalk Credit Timeout Counter *
- * increments every 128 II clocks. The counter starts counting *
- * anytime the credit count drops below a threshold, and resets to *
- * zero (stops counting) anytime the credit count is at or above the *
- * threshold. The threshold is 1 credit in direct connect mode and 2 *
- * in Crossbow connect mode. When the internal Crosstalk Credit *
- * Timeout Counter reaches the value programmed in this register, a *
- * Crosstalk Credit Timeout has occurred. The internal counter is not *
- * readable from software, and stops counting at its maximum value, *
- * so it cannot cause more than one interrupt. *
- * *
- ************************************************************************/
-
-typedef union ii_ixcc_u {
- u64 ii_ixcc_regval;
- struct {
- u64 i_time_out:26;
- u64 i_rsvd:38;
- } ii_ixcc_fld_s;
-} ii_ixcc_u_t;
-
-/************************************************************************
- * *
- * Description: This register qualifies all the PIO and DMA *
- * operations launched from widget 0 towards the SHub. In *
- * addition, it also qualifies accesses by the BTE streams. *
- * The bits in each field of this register are cleared by the SHub *
- * upon detection of an error which requires widget 0 or the BTE *
- * streams to be terminated. Whether or not widget x has access *
- * rights to this SHub is determined by an AND of the device *
- * enable bit in the appropriate field of this register and bit 0 in *
- * the Wx_IAC field. The bits in this field are set by writing a 1 to *
- * them. Incoming replies from Crosstalk are not subject to this *
- * access control mechanism. *
- * *
- ************************************************************************/
-
-typedef union ii_imem_u {
- u64 ii_imem_regval;
- struct {
- u64 i_w0_esd:1;
- u64 i_rsvd_3:3;
- u64 i_b0_esd:1;
- u64 i_rsvd_2:3;
- u64 i_b1_esd:1;
- u64 i_rsvd_1:3;
- u64 i_clr_precise:1;
- u64 i_rsvd:51;
- } ii_imem_fld_s;
-} ii_imem_u_t;
-
-/************************************************************************
- * *
- * Description: This register specifies the timeout value to use for *
- * monitoring Crosstalk tail flits coming into the Shub in the *
- * TAIL_TO field. An internal counter associated with this register *
- * is incremented every 128 II internal clocks (7 bits). The counter *
- * starts counting anytime a header micropacket is received and stops *
- * counting (and resets to zero) any time a micropacket with a Tail *
- * bit is received. Once the counter reaches the threshold value *
- * programmed in this register, it generates an interrupt to the *
- * processor that is programmed into the IIDSR. The counter saturates *
- * (does not roll over) at its maximum value, so it cannot cause *
- * another interrupt until after it is cleared. *
- * The register also contains the Read Response Timeout values. The *
- * Prescalar is 23 bits, and counts II clocks. An internal counter *
- * increments on every II clock and when it reaches the value in the *
- * Prescalar field, all IPRTE registers with their valid bits set *
- * have their Read Response timers bumped. Whenever any of them match *
- * the value in the RRSP_TO field, a Read Response Timeout has *
- * occurred, and error handling occurs as described in the Error *
- * Handling section of this document. *
- * *
- ************************************************************************/
-
-typedef union ii_ixtt_u {
- u64 ii_ixtt_regval;
- struct {
- u64 i_tail_to:26;
- u64 i_rsvd_1:6;
- u64 i_rrsp_ps:23;
- u64 i_rrsp_to:5;
- u64 i_rsvd:4;
- } ii_ixtt_fld_s;
-} ii_ixtt_u_t;
-
-/************************************************************************
- * *
- * Writing a 1 to the fields of this register clears the appropriate *
- * error bits in other areas of SHub. Note that when the *
- * E_PRB_x bits are used to clear error bits in PRB registers, *
- * SPUR_RD and SPUR_WR may persist, because they require additional *
- * action to clear them. See the IPRBx and IXSS Register *
- * specifications. *
- * *
- ************************************************************************/
-
-typedef union ii_ieclr_u {
- u64 ii_ieclr_regval;
- struct {
- u64 i_e_prb_0:1;
- u64 i_rsvd:7;
- u64 i_e_prb_8:1;
- u64 i_e_prb_9:1;
- u64 i_e_prb_a:1;
- u64 i_e_prb_b:1;
- u64 i_e_prb_c:1;
- u64 i_e_prb_d:1;
- u64 i_e_prb_e:1;
- u64 i_e_prb_f:1;
- u64 i_e_crazy:1;
- u64 i_e_bte_0:1;
- u64 i_e_bte_1:1;
- u64 i_reserved_1:10;
- u64 i_spur_rd_hdr:1;
- u64 i_cam_intr_to:1;
- u64 i_cam_overflow:1;
- u64 i_cam_read_miss:1;
- u64 i_ioq_rep_underflow:1;
- u64 i_ioq_req_underflow:1;
- u64 i_ioq_rep_overflow:1;
- u64 i_ioq_req_overflow:1;
- u64 i_iiq_rep_overflow:1;
- u64 i_iiq_req_overflow:1;
- u64 i_ii_xn_rep_cred_overflow:1;
- u64 i_ii_xn_req_cred_overflow:1;
- u64 i_ii_xn_invalid_cmd:1;
- u64 i_xn_ii_invalid_cmd:1;
- u64 i_reserved_2:21;
- } ii_ieclr_fld_s;
-} ii_ieclr_u_t;
-
-/************************************************************************
- * *
- * This register controls both BTEs. SOFT_RESET is intended for *
- * recovery after an error. COUNT controls the total number of CRBs *
- * that both BTEs (combined) can use, which affects total BTE *
- * bandwidth. *
- * *
- ************************************************************************/
-
-typedef union ii_ibcr_u {
- u64 ii_ibcr_regval;
- struct {
- u64 i_count:4;
- u64 i_rsvd_1:4;
- u64 i_soft_reset:1;
- u64 i_rsvd:55;
- } ii_ibcr_fld_s;
-} ii_ibcr_u_t;
-
-/************************************************************************
- * *
- * This register contains the header of a spurious read response *
- * received from Crosstalk. A spurious read response is defined as a *
- * read response received by II from a widget for which (1) the SIDN *
- * has a value between 1 and 7, inclusive (II never sends requests to *
- * these widgets (2) there is no valid IPRTE register which *
- * corresponds to the TNUM, or (3) the widget indicated in SIDN is *
- * not the same as the widget recorded in the IPRTE register *
- * referenced by the TNUM. If this condition is true, and if the *
- * IXSS[VALID] bit is clear, then the header of the spurious read *
- * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The *
- * errant header is thereby captured, and no further spurious read *
- * respones are captured until IXSS[VALID] is cleared by setting the *
- * appropriate bit in IECLR. Every time a spurious read response is *
- * detected, the SPUR_RD bit of the PRB corresponding to the incoming *
- * message's SIDN field is set. This always happens, regardless of *
- * whether a header is captured. The programmer should check *
- * IXSM[SIDN] to determine which widget sent the spurious response, *
- * because there may be more than one SPUR_RD bit set in the PRB *
- * registers. The widget indicated by IXSM[SIDN] was the first *
- * spurious read response to be received since the last time *
- * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB *
- * will be set. Any SPUR_RD bits in any other PRB registers indicate *
- * spurious messages from other widets which were detected after the *
- * header was captured.. *
- * *
- ************************************************************************/
-
-typedef union ii_ixsm_u {
- u64 ii_ixsm_regval;
- struct {
- u64 i_byte_en:32;
- u64 i_reserved:1;
- u64 i_tag:3;
- u64 i_alt_pactyp:4;
- u64 i_bo:1;
- u64 i_error:1;
- u64 i_vbpm:1;
- u64 i_gbr:1;
- u64 i_ds:2;
- u64 i_ct:1;
- u64 i_tnum:5;
- u64 i_pactyp:4;
- u64 i_sidn:4;
- u64 i_didn:4;
- } ii_ixsm_fld_s;
-} ii_ixsm_u_t;
-
-/************************************************************************
- * *
- * This register contains the sideband bits of a spurious read *
- * response received from Crosstalk. *
- * *
- ************************************************************************/
-
-typedef union ii_ixss_u {
- u64 ii_ixss_regval;
- struct {
- u64 i_sideband:8;
- u64 i_rsvd:55;
- u64 i_valid:1;
- } ii_ixss_fld_s;
-} ii_ixss_u_t;
-
-/************************************************************************
- * *
- * This register enables software to access the II LLP's test port. *
- * Refer to the LLP 2.5 documentation for an explanation of the test *
- * port. Software can write to this register to program the values *
- * for the control fields (TestErrCapture, TestClear, TestFlit, *
- * TestMask and TestSeed). Similarly, software can read from this *
- * register to obtain the values of the test port's status outputs *
- * (TestCBerr, TestValid and TestData). *
- * *
- ************************************************************************/
-
-typedef union ii_ilct_u {
- u64 ii_ilct_regval;
- struct {
- u64 i_test_seed:20;
- u64 i_test_mask:8;
- u64 i_test_data:20;
- u64 i_test_valid:1;
- u64 i_test_cberr:1;
- u64 i_test_flit:3;
- u64 i_test_clear:1;
- u64 i_test_err_capture:1;
- u64 i_rsvd:9;
- } ii_ilct_fld_s;
-} ii_ilct_u_t;
-
-/************************************************************************
- * *
- * If the II detects an illegal incoming Duplonet packet (request or *
- * reply) when VALID==0 in the IIEPH1 register, then it saves the *
- * contents of the packet's header flit in the IIEPH1 and IIEPH2 *
- * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit, *
- * and assigns a value to the ERR_TYPE field which indicates the *
- * specific nature of the error. The II recognizes four different *
- * types of errors: short request packets (ERR_TYPE==2), short reply *
- * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long *
- * reply packets (ERR_TYPE==5). The encodings for these types of *
- * errors were chosen to be consistent with the same types of errors *
- * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in *
- * the LB unit). If the II detects an illegal incoming Duplonet *
- * packet when VALID==1 in the IIEPH1 register, then it merely sets *
- * the OVERRUN bit to indicate that a subsequent error has happened, *
- * and does nothing further. *
- * *
- ************************************************************************/
-
-typedef union ii_iieph1_u {
- u64 ii_iieph1_regval;
- struct {
- u64 i_command:7;
- u64 i_rsvd_5:1;
- u64 i_suppl:14;
- u64 i_rsvd_4:1;
- u64 i_source:14;
- u64 i_rsvd_3:1;
- u64 i_err_type:4;
- u64 i_rsvd_2:4;
- u64 i_overrun:1;
- u64 i_rsvd_1:3;
- u64 i_valid:1;
- u64 i_rsvd:13;
- } ii_iieph1_fld_s;
-} ii_iieph1_u_t;
-
-/************************************************************************
- * *
- * This register holds the Address field from the header flit of an *
- * incoming erroneous Duplonet packet, along with the tail bit which *
- * accompanied this header flit. This register is essentially an *
- * extension of IIEPH1. Two registers were necessary because the 64 *
- * bits available in only a single register were insufficient to *
- * capture the entire header flit of an erroneous packet. *
- * *
- ************************************************************************/
-
-typedef union ii_iieph2_u {
- u64 ii_iieph2_regval;
- struct {
- u64 i_rsvd_0:3;
- u64 i_address:47;
- u64 i_rsvd_1:10;
- u64 i_tail:1;
- u64 i_rsvd:3;
- } ii_iieph2_fld_s;
-} ii_iieph2_u_t;
-
-/******************************/
-
-/************************************************************************
- * *
- * This register's value is a bit vector that guards access from SXBs *
- * to local registers within the II as well as to external Crosstalk *
- * widgets *
- * *
- ************************************************************************/
-
-typedef union ii_islapr_u {
- u64 ii_islapr_regval;
- struct {
- u64 i_region:64;
- } ii_islapr_fld_s;
-} ii_islapr_u_t;
-
-/************************************************************************
- * *
- * A write to this register of the 56-bit value "Pup+Bun" will cause *
- * the bit in the ISLAPR register corresponding to the region of the *
- * requestor to be set (access allowed). (
- * *
- ************************************************************************/
-
-typedef union ii_islapo_u {
- u64 ii_islapo_regval;
- struct {
- u64 i_io_sbx_ovrride:56;
- u64 i_rsvd:8;
- } ii_islapo_fld_s;
-} ii_islapo_u_t;
-
-/************************************************************************
- * *
- * Determines how long the wrapper will wait aftr an interrupt is *
- * initially issued from the II before it times out the outstanding *
- * interrupt and drops it from the interrupt queue. *
- * *
- ************************************************************************/
-
-typedef union ii_iwi_u {
- u64 ii_iwi_regval;
- struct {
- u64 i_prescale:24;
- u64 i_rsvd:8;
- u64 i_timeout:8;
- u64 i_rsvd1:8;
- u64 i_intrpt_retry_period:8;
- u64 i_rsvd2:8;
- } ii_iwi_fld_s;
-} ii_iwi_u_t;
-
-/************************************************************************
- * *
- * Log errors which have occurred in the II wrapper. The errors are *
- * cleared by writing to the IECLR register. *
- * *
- ************************************************************************/
-
-typedef union ii_iwel_u {
- u64 ii_iwel_regval;
- struct {
- u64 i_intr_timed_out:1;
- u64 i_rsvd:7;
- u64 i_cam_overflow:1;
- u64 i_cam_read_miss:1;
- u64 i_rsvd1:2;
- u64 i_ioq_rep_underflow:1;
- u64 i_ioq_req_underflow:1;
- u64 i_ioq_rep_overflow:1;
- u64 i_ioq_req_overflow:1;
- u64 i_iiq_rep_overflow:1;
- u64 i_iiq_req_overflow:1;
- u64 i_rsvd2:6;
- u64 i_ii_xn_rep_cred_over_under:1;
- u64 i_ii_xn_req_cred_over_under:1;
- u64 i_rsvd3:6;
- u64 i_ii_xn_invalid_cmd:1;
- u64 i_xn_ii_invalid_cmd:1;
- u64 i_rsvd4:30;
- } ii_iwel_fld_s;
-} ii_iwel_u_t;
-
-/************************************************************************
- * *
- * Controls the II wrapper. *
- * *
- ************************************************************************/
-
-typedef union ii_iwc_u {
- u64 ii_iwc_regval;
- struct {
- u64 i_dma_byte_swap:1;
- u64 i_rsvd:3;
- u64 i_cam_read_lines_reset:1;
- u64 i_rsvd1:3;
- u64 i_ii_xn_cred_over_under_log:1;
- u64 i_rsvd2:19;
- u64 i_xn_rep_iq_depth:5;
- u64 i_rsvd3:3;
- u64 i_xn_req_iq_depth:5;
- u64 i_rsvd4:3;
- u64 i_iiq_depth:6;
- u64 i_rsvd5:12;
- u64 i_force_rep_cred:1;
- u64 i_force_req_cred:1;
- } ii_iwc_fld_s;
-} ii_iwc_u_t;
-
-/************************************************************************
- * *
- * Status in the II wrapper. *
- * *
- ************************************************************************/
-
-typedef union ii_iws_u {
- u64 ii_iws_regval;
- struct {
- u64 i_xn_rep_iq_credits:5;
- u64 i_rsvd:3;
- u64 i_xn_req_iq_credits:5;
- u64 i_rsvd1:51;
- } ii_iws_fld_s;
-} ii_iws_u_t;
-
-/************************************************************************
- * *
- * Masks errors in the IWEL register. *
- * *
- ************************************************************************/
-
-typedef union ii_iweim_u {
- u64 ii_iweim_regval;
- struct {
- u64 i_intr_timed_out:1;
- u64 i_rsvd:7;
- u64 i_cam_overflow:1;
- u64 i_cam_read_miss:1;
- u64 i_rsvd1:2;
- u64 i_ioq_rep_underflow:1;
- u64 i_ioq_req_underflow:1;
- u64 i_ioq_rep_overflow:1;
- u64 i_ioq_req_overflow:1;
- u64 i_iiq_rep_overflow:1;
- u64 i_iiq_req_overflow:1;
- u64 i_rsvd2:6;
- u64 i_ii_xn_rep_cred_overflow:1;
- u64 i_ii_xn_req_cred_overflow:1;
- u64 i_rsvd3:6;
- u64 i_ii_xn_invalid_cmd:1;
- u64 i_xn_ii_invalid_cmd:1;
- u64 i_rsvd4:30;
- } ii_iweim_fld_s;
-} ii_iweim_u_t;
-
-/************************************************************************
- * *
- * A write to this register causes a particular field in the *
- * corresponding widget's PRB entry to be adjusted up or down by 1. *
- * This counter should be used when recovering from error and reset *
- * conditions. Note that software would be capable of causing *
- * inadvertent overflow or underflow of these counters. *
- * *
- ************************************************************************/
-
-typedef union ii_ipca_u {
- u64 ii_ipca_regval;
- struct {
- u64 i_wid:4;
- u64 i_adjust:1;
- u64 i_rsvd_1:3;
- u64 i_field:2;
- u64 i_rsvd:54;
- } ii_ipca_fld_s;
-} ii_ipca_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte0a_u {
- u64 ii_iprte0a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte0a_fld_s;
-} ii_iprte0a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte1a_u {
- u64 ii_iprte1a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte1a_fld_s;
-} ii_iprte1a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte2a_u {
- u64 ii_iprte2a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte2a_fld_s;
-} ii_iprte2a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte3a_u {
- u64 ii_iprte3a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte3a_fld_s;
-} ii_iprte3a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte4a_u {
- u64 ii_iprte4a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte4a_fld_s;
-} ii_iprte4a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte5a_u {
- u64 ii_iprte5a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte5a_fld_s;
-} ii_iprte5a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte6a_u {
- u64 ii_iprte6a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte6a_fld_s;
-} ii_iprte6a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte7a_u {
- u64 ii_iprte7a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprtea7_fld_s;
-} ii_iprte7a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte0b_u {
- u64 ii_iprte0b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte0b_fld_s;
-} ii_iprte0b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte1b_u {
- u64 ii_iprte1b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte1b_fld_s;
-} ii_iprte1b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte2b_u {
- u64 ii_iprte2b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte2b_fld_s;
-} ii_iprte2b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte3b_u {
- u64 ii_iprte3b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte3b_fld_s;
-} ii_iprte3b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte4b_u {
- u64 ii_iprte4b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte4b_fld_s;
-} ii_iprte4b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte5b_u {
- u64 ii_iprte5b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte5b_fld_s;
-} ii_iprte5b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte6b_u {
- u64 ii_iprte6b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
-
- } ii_iprte6b_fld_s;
-} ii_iprte6b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte7b_u {
- u64 ii_iprte7b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte7b_fld_s;
-} ii_iprte7b_u_t;
-
-/************************************************************************
- * *
- * Description: SHub II contains a feature which did not exist in *
- * the Hub which automatically cleans up after a Read Response *
- * timeout, including deallocation of the IPRTE and recovery of IBuf *
- * space. The inclusion of this register in SHub is for backward *
- * compatibility *
- * A write to this register causes an entry from the table of *
- * outstanding PIO Read Requests to be freed and returned to the *
- * stack of free entries. This register is used in handling the *
- * timeout errors that result in a PIO Reply never returning from *
- * Crosstalk. *
- * Note that this register does not affect the contents of the IPRTE *
- * registers. The Valid bits in those registers have to be *
- * specifically turned off by software. *
- * *
- ************************************************************************/
-
-typedef union ii_ipdr_u {
- u64 ii_ipdr_regval;
- struct {
- u64 i_te:3;
- u64 i_rsvd_1:1;
- u64 i_pnd:1;
- u64 i_init_rpcnt:1;
- u64 i_rsvd:58;
- } ii_ipdr_fld_s;
-} ii_ipdr_u_t;
-
-/************************************************************************
- * *
- * A write to this register causes a CRB entry to be returned to the *
- * queue of free CRBs. The entry should have previously been cleared *
- * (mark bit) via backdoor access to the pertinent CRB entry. This *
- * register is used in the last step of handling the errors that are *
- * captured and marked in CRB entries. Briefly: 1) first error for *
- * DMA write from a particular device, and first error for a *
- * particular BTE stream, lead to a marked CRB entry, and processor *
- * interrupt, 2) software reads the error information captured in the *
- * CRB entry, and presumably takes some corrective action, 3) *
- * software clears the mark bit, and finally 4) software writes to *
- * the ICDR register to return the CRB entry to the list of free CRB *
- * entries. *
- * *
- ************************************************************************/
-
-typedef union ii_icdr_u {
- u64 ii_icdr_regval;
- struct {
- u64 i_crb_num:4;
- u64 i_pnd:1;
- u64 i_rsvd:59;
- } ii_icdr_fld_s;
-} ii_icdr_u_t;
-
-/************************************************************************
- * *
- * This register provides debug access to two FIFOs inside of II. *
- * Both IOQ_MAX* fields of this register contain the instantaneous *
- * depth (in units of the number of available entries) of the *
- * associated IOQ FIFO. A read of this register will return the *
- * number of free entries on each FIFO at the time of the read. So *
- * when a FIFO is idle, the associated field contains the maximum *
- * depth of the FIFO. This register is writable for debug reasons *
- * and is intended to be written with the maximum desired FIFO depth *
- * while the FIFO is idle. Software must assure that II is idle when *
- * this register is written. If there are any active entries in any *
- * of these FIFOs when this register is written, the results are *
- * undefined. *
- * *
- ************************************************************************/
-
-typedef union ii_ifdr_u {
- u64 ii_ifdr_regval;
- struct {
- u64 i_ioq_max_rq:7;
- u64 i_set_ioq_rq:1;
- u64 i_ioq_max_rp:7;
- u64 i_set_ioq_rp:1;
- u64 i_rsvd:48;
- } ii_ifdr_fld_s;
-} ii_ifdr_u_t;
-
-/************************************************************************
- * *
- * This register allows the II to become sluggish in removing *
- * messages from its inbound queue (IIQ). This will cause messages to *
- * back up in either virtual channel. Disabling the "molasses" mode *
- * subsequently allows the II to be tested under stress. In the *
- * sluggish ("Molasses") mode, the localized effects of congestion *
- * can be observed. *
- * *
- ************************************************************************/
-
-typedef union ii_iiap_u {
- u64 ii_iiap_regval;
- struct {
- u64 i_rq_mls:6;
- u64 i_rsvd_1:2;
- u64 i_rp_mls:6;
- u64 i_rsvd:50;
- } ii_iiap_fld_s;
-} ii_iiap_u_t;
-
-/************************************************************************
- * *
- * This register allows several parameters of CRB operation to be *
- * set. Note that writing to this register can have catastrophic side *
- * effects, if the CRB is not quiescent, i.e. if the CRB is *
- * processing protocol messages when the write occurs. *
- * *
- ************************************************************************/
-
-typedef union ii_icmr_u {
- u64 ii_icmr_regval;
- struct {
- u64 i_sp_msg:1;
- u64 i_rd_hdr:1;
- u64 i_rsvd_4:2;
- u64 i_c_cnt:4;
- u64 i_rsvd_3:4;
- u64 i_clr_rqpd:1;
- u64 i_clr_rppd:1;
- u64 i_rsvd_2:2;
- u64 i_fc_cnt:4;
- u64 i_crb_vld:15;
- u64 i_crb_mark:15;
- u64 i_rsvd_1:2;
- u64 i_precise:1;
- u64 i_rsvd:11;
- } ii_icmr_fld_s;
-} ii_icmr_u_t;
-
-/************************************************************************
- * *
- * This register allows control of the table portion of the CRB *
- * logic via software. Control operations from this register have *
- * priority over all incoming Crosstalk or BTE requests. *
- * *
- ************************************************************************/
-
-typedef union ii_iccr_u {
- u64 ii_iccr_regval;
- struct {
- u64 i_crb_num:4;
- u64 i_rsvd_1:4;
- u64 i_cmd:8;
- u64 i_pending:1;
- u64 i_rsvd:47;
- } ii_iccr_fld_s;
-} ii_iccr_u_t;
-
-/************************************************************************
- * *
- * This register allows the maximum timeout value to be programmed. *
- * *
- ************************************************************************/
-
-typedef union ii_icto_u {
- u64 ii_icto_regval;
- struct {
- u64 i_timeout:8;
- u64 i_rsvd:56;
- } ii_icto_fld_s;
-} ii_icto_u_t;
-
-/************************************************************************
- * *
- * This register allows the timeout prescalar to be programmed. An *
- * internal counter is associated with this register. When the *
- * internal counter reaches the value of the PRESCALE field, the *
- * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT] *
- * field). The internal counter resets to zero, and then continues *
- * counting. *
- * *
- ************************************************************************/
-
-typedef union ii_ictp_u {
- u64 ii_ictp_regval;
- struct {
- u64 i_prescale:24;
- u64 i_rsvd:40;
- } ii_ictp_fld_s;
-} ii_ictp_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * The CRB Entry registers can be conceptualized as rows and columns *
- * (illustrated in the table above). Each row contains the 4 *
- * registers required for a single CRB Entry. The first doubleword *
- * (column) for each entry is labeled A, and the second doubleword *
- * (higher address) is labeled B, the third doubleword is labeled C, *
- * the fourth doubleword is labeled D and the fifth doubleword is *
- * labeled E. All CRB entries have their addresses on a quarter *
- * cacheline aligned boundary. *
- * Upon reset, only the following fields are initialized: valid *
- * (VLD), priority count, timeout, timeout valid, and context valid. *
- * All other bits should be cleared by software before use (after *
- * recovering any potential error state from before the reset). *
- * The following four tables summarize the format for the four *
- * registers that are used for each ICRB# Entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_a_u {
- u64 ii_icrb0_a_regval;
- struct {
- u64 ia_iow:1;
- u64 ia_vld:1;
- u64 ia_addr:47;
- u64 ia_tnum:5;
- u64 ia_sidn:4;
- u64 ia_rsvd:6;
- } ii_icrb0_a_fld_s;
-} ii_icrb0_a_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_b_u {
- u64 ii_icrb0_b_regval;
- struct {
- u64 ib_xt_err:1;
- u64 ib_mark:1;
- u64 ib_ln_uce:1;
- u64 ib_errcode:3;
- u64 ib_error:1;
- u64 ib_stall__bte_1:1;
- u64 ib_stall__bte_0:1;
- u64 ib_stall__intr:1;
- u64 ib_stall_ib:1;
- u64 ib_intvn:1;
- u64 ib_wb:1;
- u64 ib_hold:1;
- u64 ib_ack:1;
- u64 ib_resp:1;
- u64 ib_ack_cnt:11;
- u64 ib_rsvd:7;
- u64 ib_exc:5;
- u64 ib_init:3;
- u64 ib_imsg:8;
- u64 ib_imsgtype:2;
- u64 ib_use_old:1;
- u64 ib_rsvd_1:11;
- } ii_icrb0_b_fld_s;
-} ii_icrb0_b_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_c_u {
- u64 ii_icrb0_c_regval;
- struct {
- u64 ic_source:15;
- u64 ic_size:2;
- u64 ic_ct:1;
- u64 ic_bte_num:1;
- u64 ic_gbr:1;
- u64 ic_resprqd:1;
- u64 ic_bo:1;
- u64 ic_suppl:15;
- u64 ic_rsvd:27;
- } ii_icrb0_c_fld_s;
-} ii_icrb0_c_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_d_u {
- u64 ii_icrb0_d_regval;
- struct {
- u64 id_pa_be:43;
- u64 id_bte_op:1;
- u64 id_pr_psc:4;
- u64 id_pr_cnt:4;
- u64 id_sleep:1;
- u64 id_rsvd:11;
- } ii_icrb0_d_fld_s;
-} ii_icrb0_d_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_e_u {
- u64 ii_icrb0_e_regval;
- struct {
- u64 ie_timeout:8;
- u64 ie_context:15;
- u64 ie_rsvd:1;
- u64 ie_tvld:1;
- u64 ie_cvld:1;
- u64 ie_rsvd_0:38;
- } ii_icrb0_e_fld_s;
-} ii_icrb0_e_u_t;
-
-/************************************************************************
- * *
- * This register contains the lower 64 bits of the header of the *
- * spurious message captured by II. Valid when the SP_MSG bit in ICMR *
- * register is set. *
- * *
- ************************************************************************/
-
-typedef union ii_icsml_u {
- u64 ii_icsml_regval;
- struct {
- u64 i_tt_addr:47;
- u64 i_newsuppl_ex:14;
- u64 i_reserved:2;
- u64 i_overflow:1;
- } ii_icsml_fld_s;
-} ii_icsml_u_t;
-
-/************************************************************************
- * *
- * This register contains the middle 64 bits of the header of the *
- * spurious message captured by II. Valid when the SP_MSG bit in ICMR *
- * register is set. *
- * *
- ************************************************************************/
-
-typedef union ii_icsmm_u {
- u64 ii_icsmm_regval;
- struct {
- u64 i_tt_ack_cnt:11;
- u64 i_reserved:53;
- } ii_icsmm_fld_s;
-} ii_icsmm_u_t;
-
-/************************************************************************
- * *
- * This register contains the microscopic state, all the inputs to *
- * the protocol table, captured with the spurious message. Valid when *
- * the SP_MSG bit in the ICMR register is set. *
- * *
- ************************************************************************/
-
-typedef union ii_icsmh_u {
- u64 ii_icsmh_regval;
- struct {
- u64 i_tt_vld:1;
- u64 i_xerr:1;
- u64 i_ft_cwact_o:1;
- u64 i_ft_wact_o:1;
- u64 i_ft_active_o:1;
- u64 i_sync:1;
- u64 i_mnusg:1;
- u64 i_mnusz:1;
- u64 i_plusz:1;
- u64 i_plusg:1;
- u64 i_tt_exc:5;
- u64 i_tt_wb:1;
- u64 i_tt_hold:1;
- u64 i_tt_ack:1;
- u64 i_tt_resp:1;
- u64 i_tt_intvn:1;
- u64 i_g_stall_bte1:1;
- u64 i_g_stall_bte0:1;
- u64 i_g_stall_il:1;
- u64 i_g_stall_ib:1;
- u64 i_tt_imsg:8;
- u64 i_tt_imsgtype:2;
- u64 i_tt_use_old:1;
- u64 i_tt_respreqd:1;
- u64 i_tt_bte_num:1;
- u64 i_cbn:1;
- u64 i_match:1;
- u64 i_rpcnt_lt_34:1;
- u64 i_rpcnt_ge_34:1;
- u64 i_rpcnt_lt_18:1;
- u64 i_rpcnt_ge_18:1;
- u64 i_rpcnt_lt_2:1;
- u64 i_rpcnt_ge_2:1;
- u64 i_rqcnt_lt_18:1;
- u64 i_rqcnt_ge_18:1;
- u64 i_rqcnt_lt_2:1;
- u64 i_rqcnt_ge_2:1;
- u64 i_tt_device:7;
- u64 i_tt_init:3;
- u64 i_reserved:5;
- } ii_icsmh_fld_s;
-} ii_icsmh_u_t;
-
-/************************************************************************
- * *
- * The Shub DEBUG unit provides a 3-bit selection signal to the *
- * II core and a 3-bit selection signal to the fsbclk domain in the II *
- * wrapper. *
- * *
- ************************************************************************/
-
-typedef union ii_idbss_u {
- u64 ii_idbss_regval;
- struct {
- u64 i_iioclk_core_submenu:3;
- u64 i_rsvd:5;
- u64 i_fsbclk_wrapper_submenu:3;
- u64 i_rsvd_1:5;
- u64 i_iioclk_menu:5;
- u64 i_rsvd_2:43;
- } ii_idbss_fld_s;
-} ii_idbss_u_t;
-
-/************************************************************************
- * *
- * Description: This register is used to set up the length for a *
- * transfer and then to monitor the progress of that transfer. This *
- * register needs to be initialized before a transfer is started. A *
- * legitimate write to this register will set the Busy bit, clear the *
- * Error bit, and initialize the length to the value desired. *
- * While the transfer is in progress, hardware will decrement the *
- * length field with each successful block that is copied. Once the *
- * transfer completes, hardware will clear the Busy bit. The length *
- * field will also contain the number of cache lines left to be *
- * transferred. *
- * *
- ************************************************************************/
-
-typedef union ii_ibls0_u {
- u64 ii_ibls0_regval;
- struct {
- u64 i_length:16;
- u64 i_error:1;
- u64 i_rsvd_1:3;
- u64 i_busy:1;
- u64 i_rsvd:43;
- } ii_ibls0_fld_s;
-} ii_ibls0_u_t;
-
-/************************************************************************
- * *
- * This register should be loaded before a transfer is started. The *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
- * address as described in Section 1.3, Figure2 and Figure3. Since *
- * the bottom 7 bits of the address are always taken to be zero, BTE *
- * transfers are always cacheline-aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibsa0_u {
- u64 ii_ibsa0_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:42;
- u64 i_rsvd:15;
- } ii_ibsa0_fld_s;
-} ii_ibsa0_u_t;
-
-/************************************************************************
- * *
- * This register should be loaded before a transfer is started. The *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
- * address as described in Section 1.3, Figure2 and Figure3. Since *
- * the bottom 7 bits of the address are always taken to be zero, BTE *
- * transfers are always cacheline-aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibda0_u {
- u64 ii_ibda0_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:42;
- u64 i_rsvd:15;
- } ii_ibda0_fld_s;
-} ii_ibda0_u_t;
-
-/************************************************************************
- * *
- * Writing to this register sets up the attributes of the transfer *
- * and initiates the transfer operation. Reading this register has *
- * the side effect of terminating any transfer in progress. Note: *
- * stopping a transfer midstream could have an adverse impact on the *
- * other BTE. If a BTE stream has to be stopped (due to error *
- * handling for example), both BTE streams should be stopped and *
- * their transfers discarded. *
- * *
- ************************************************************************/
-
-typedef union ii_ibct0_u {
- u64 ii_ibct0_regval;
- struct {
- u64 i_zerofill:1;
- u64 i_rsvd_2:3;
- u64 i_notify:1;
- u64 i_rsvd_1:3;
- u64 i_poison:1;
- u64 i_rsvd:55;
- } ii_ibct0_fld_s;
-} ii_ibct0_u_t;
-
-/************************************************************************
- * *
- * This register contains the address to which the WINV is sent. *
- * This address has to be cache line aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibna0_u {
- u64 ii_ibna0_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:42;
- u64 i_rsvd:15;
- } ii_ibna0_fld_s;
-} ii_ibna0_u_t;
-
-/************************************************************************
- * *
- * This register contains the programmable level as well as the node *
- * ID and PI unit of the processor to which the interrupt will be *
- * sent. *
- * *
- ************************************************************************/
-
-typedef union ii_ibia0_u {
- u64 ii_ibia0_regval;
- struct {
- u64 i_rsvd_2:1;
- u64 i_node_id:11;
- u64 i_rsvd_1:4;
- u64 i_level:7;
- u64 i_rsvd:41;
- } ii_ibia0_fld_s;
-} ii_ibia0_u_t;
-
-/************************************************************************
- * *
- * Description: This register is used to set up the length for a *
- * transfer and then to monitor the progress of that transfer. This *
- * register needs to be initialized before a transfer is started. A *
- * legitimate write to this register will set the Busy bit, clear the *
- * Error bit, and initialize the length to the value desired. *
- * While the transfer is in progress, hardware will decrement the *
- * length field with each successful block that is copied. Once the *
- * transfer completes, hardware will clear the Busy bit. The length *
- * field will also contain the number of cache lines left to be *
- * transferred. *
- * *
- ************************************************************************/
-
-typedef union ii_ibls1_u {
- u64 ii_ibls1_regval;
- struct {
- u64 i_length:16;
- u64 i_error:1;
- u64 i_rsvd_1:3;
- u64 i_busy:1;
- u64 i_rsvd:43;
- } ii_ibls1_fld_s;
-} ii_ibls1_u_t;
-
-/************************************************************************
- * *
- * This register should be loaded before a transfer is started. The *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
- * address as described in Section 1.3, Figure2 and Figure3. Since *
- * the bottom 7 bits of the address are always taken to be zero, BTE *
- * transfers are always cacheline-aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibsa1_u {
- u64 ii_ibsa1_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:33;
- u64 i_rsvd:24;
- } ii_ibsa1_fld_s;
-} ii_ibsa1_u_t;
-
-/************************************************************************
- * *
- * This register should be loaded before a transfer is started. The *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
- * address as described in Section 1.3, Figure2 and Figure3. Since *
- * the bottom 7 bits of the address are always taken to be zero, BTE *
- * transfers are always cacheline-aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibda1_u {
- u64 ii_ibda1_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:33;
- u64 i_rsvd:24;
- } ii_ibda1_fld_s;
-} ii_ibda1_u_t;
-
-/************************************************************************
- * *
- * Writing to this register sets up the attributes of the transfer *
- * and initiates the transfer operation. Reading this register has *
- * the side effect of terminating any transfer in progress. Note: *
- * stopping a transfer midstream could have an adverse impact on the *
- * other BTE. If a BTE stream has to be stopped (due to error *
- * handling for example), both BTE streams should be stopped and *
- * their transfers discarded. *
- * *
- ************************************************************************/
-
-typedef union ii_ibct1_u {
- u64 ii_ibct1_regval;
- struct {
- u64 i_zerofill:1;
- u64 i_rsvd_2:3;
- u64 i_notify:1;
- u64 i_rsvd_1:3;
- u64 i_poison:1;
- u64 i_rsvd:55;
- } ii_ibct1_fld_s;
-} ii_ibct1_u_t;
-
-/************************************************************************
- * *
- * This register contains the address to which the WINV is sent. *
- * This address has to be cache line aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibna1_u {
- u64 ii_ibna1_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:33;
- u64 i_rsvd:24;
- } ii_ibna1_fld_s;
-} ii_ibna1_u_t;
-
-/************************************************************************
- * *
- * This register contains the programmable level as well as the node *
- * ID and PI unit of the processor to which the interrupt will be *
- * sent. *
- * *
- ************************************************************************/
-
-typedef union ii_ibia1_u {
- u64 ii_ibia1_regval;
- struct {
- u64 i_pi_id:1;
- u64 i_node_id:8;
- u64 i_rsvd_1:7;
- u64 i_level:7;
- u64 i_rsvd:41;
- } ii_ibia1_fld_s;
-} ii_ibia1_u_t;
-
-/************************************************************************
- * *
- * This register defines the resources that feed information into *
- * the two performance counters located in the IO Performance *
- * Profiling Register. There are 17 different quantities that can be *
- * measured. Given these 17 different options, the two performance *
- * counters have 15 of them in common; menu selections 0 through 0xE *
- * are identical for each performance counter. As for the other two *
- * options, one is available from one performance counter and the *
- * other is available from the other performance counter. Hence, the *
- * II supports all 17*16=272 possible combinations of quantities to *
- * measure. *
- * *
- ************************************************************************/
-
-typedef union ii_ipcr_u {
- u64 ii_ipcr_regval;
- struct {
- u64 i_ippr0_c:4;
- u64 i_ippr1_c:4;
- u64 i_icct:8;
- u64 i_rsvd:48;
- } ii_ipcr_fld_s;
-} ii_ipcr_u_t;
-
-/************************************************************************
- * *
- * *
- * *
- ************************************************************************/
-
-typedef union ii_ippr_u {
- u64 ii_ippr_regval;
- struct {
- u64 i_ippr0:32;
- u64 i_ippr1:32;
- } ii_ippr_fld_s;
-} ii_ippr_u_t;
-
-/************************************************************************
- * *
- * The following defines which were not formed into structures are *
- * probably identical to another register, and the name of the *
- * register is provided against each of these registers. This *
- * information needs to be checked carefully *
- * *
- * IIO_ICRB1_A IIO_ICRB0_A *
- * IIO_ICRB1_B IIO_ICRB0_B *
- * IIO_ICRB1_C IIO_ICRB0_C *
- * IIO_ICRB1_D IIO_ICRB0_D *
- * IIO_ICRB1_E IIO_ICRB0_E *
- * IIO_ICRB2_A IIO_ICRB0_A *
- * IIO_ICRB2_B IIO_ICRB0_B *
- * IIO_ICRB2_C IIO_ICRB0_C *
- * IIO_ICRB2_D IIO_ICRB0_D *
- * IIO_ICRB2_E IIO_ICRB0_E *
- * IIO_ICRB3_A IIO_ICRB0_A *
- * IIO_ICRB3_B IIO_ICRB0_B *
- * IIO_ICRB3_C IIO_ICRB0_C *
- * IIO_ICRB3_D IIO_ICRB0_D *
- * IIO_ICRB3_E IIO_ICRB0_E *
- * IIO_ICRB4_A IIO_ICRB0_A *
- * IIO_ICRB4_B IIO_ICRB0_B *
- * IIO_ICRB4_C IIO_ICRB0_C *
- * IIO_ICRB4_D IIO_ICRB0_D *
- * IIO_ICRB4_E IIO_ICRB0_E *
- * IIO_ICRB5_A IIO_ICRB0_A *
- * IIO_ICRB5_B IIO_ICRB0_B *
- * IIO_ICRB5_C IIO_ICRB0_C *
- * IIO_ICRB5_D IIO_ICRB0_D *
- * IIO_ICRB5_E IIO_ICRB0_E *
- * IIO_ICRB6_A IIO_ICRB0_A *
- * IIO_ICRB6_B IIO_ICRB0_B *
- * IIO_ICRB6_C IIO_ICRB0_C *
- * IIO_ICRB6_D IIO_ICRB0_D *
- * IIO_ICRB6_E IIO_ICRB0_E *
- * IIO_ICRB7_A IIO_ICRB0_A *
- * IIO_ICRB7_B IIO_ICRB0_B *
- * IIO_ICRB7_C IIO_ICRB0_C *
- * IIO_ICRB7_D IIO_ICRB0_D *
- * IIO_ICRB7_E IIO_ICRB0_E *
- * IIO_ICRB8_A IIO_ICRB0_A *
- * IIO_ICRB8_B IIO_ICRB0_B *
- * IIO_ICRB8_C IIO_ICRB0_C *
- * IIO_ICRB8_D IIO_ICRB0_D *
- * IIO_ICRB8_E IIO_ICRB0_E *
- * IIO_ICRB9_A IIO_ICRB0_A *
- * IIO_ICRB9_B IIO_ICRB0_B *
- * IIO_ICRB9_C IIO_ICRB0_C *
- * IIO_ICRB9_D IIO_ICRB0_D *
- * IIO_ICRB9_E IIO_ICRB0_E *
- * IIO_ICRBA_A IIO_ICRB0_A *
- * IIO_ICRBA_B IIO_ICRB0_B *
- * IIO_ICRBA_C IIO_ICRB0_C *
- * IIO_ICRBA_D IIO_ICRB0_D *
- * IIO_ICRBA_E IIO_ICRB0_E *
- * IIO_ICRBB_A IIO_ICRB0_A *
- * IIO_ICRBB_B IIO_ICRB0_B *
- * IIO_ICRBB_C IIO_ICRB0_C *
- * IIO_ICRBB_D IIO_ICRB0_D *
- * IIO_ICRBB_E IIO_ICRB0_E *
- * IIO_ICRBC_A IIO_ICRB0_A *
- * IIO_ICRBC_B IIO_ICRB0_B *
- * IIO_ICRBC_C IIO_ICRB0_C *
- * IIO_ICRBC_D IIO_ICRB0_D *
- * IIO_ICRBC_E IIO_ICRB0_E *
- * IIO_ICRBD_A IIO_ICRB0_A *
- * IIO_ICRBD_B IIO_ICRB0_B *
- * IIO_ICRBD_C IIO_ICRB0_C *
- * IIO_ICRBD_D IIO_ICRB0_D *
- * IIO_ICRBD_E IIO_ICRB0_E *
- * IIO_ICRBE_A IIO_ICRB0_A *
- * IIO_ICRBE_B IIO_ICRB0_B *
- * IIO_ICRBE_C IIO_ICRB0_C *
- * IIO_ICRBE_D IIO_ICRB0_D *
- * IIO_ICRBE_E IIO_ICRB0_E *
- * *
- ************************************************************************/
-
-/*
- * Slightly friendlier names for some common registers.
- */
-#define IIO_WIDGET IIO_WID /* Widget identification */
-#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */
-#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */
-#define IIO_PROTECT IIO_ILAPR /* IO interface protection */
-#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */
-#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */
-#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */
-#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */
-#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */
-#define IIO_LLP_LOG IIO_ILLR /* LLP log */
-#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout */
-#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */
-#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */
-#define IIO_IGFX_0 IIO_IGFX0
-#define IIO_IGFX_1 IIO_IGFX1
-#define IIO_IBCT_0 IIO_IBCT0
-#define IIO_IBCT_1 IIO_IBCT1
-#define IIO_IBLS_0 IIO_IBLS0
-#define IIO_IBLS_1 IIO_IBLS1
-#define IIO_IBSA_0 IIO_IBSA0
-#define IIO_IBSA_1 IIO_IBSA1
-#define IIO_IBDA_0 IIO_IBDA0
-#define IIO_IBDA_1 IIO_IBDA1
-#define IIO_IBNA_0 IIO_IBNA0
-#define IIO_IBNA_1 IIO_IBNA1
-#define IIO_IBIA_0 IIO_IBIA0
-#define IIO_IBIA_1 IIO_IBIA1
-#define IIO_IOPRB_0 IIO_IPRB0
-
-#define IIO_PRTE_A(_x) (IIO_IPRTE0_A + (8 * (_x)))
-#define IIO_PRTE_B(_x) (IIO_IPRTE0_B + (8 * (_x)))
-#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */
-#define IIO_WIDPRTE_A(x) IIO_PRTE_A(((x) - 8)) /* widget ID to its PRTE num */
-#define IIO_WIDPRTE_B(x) IIO_PRTE_B(((x) - 8)) /* widget ID to its PRTE num */
-
-#define IIO_NUM_IPRBS 9
-
-#define IIO_LLP_CSR_IS_UP 0x00002000
-#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000
-#define IIO_LLP_CSR_LLP_STAT_SHFT 12
-
-#define IIO_LLP_CB_MAX 0xffff /* in ILLR CB_CNT, Max Check Bit errors */
-#define IIO_LLP_SN_MAX 0xffff /* in ILLR SN_CNT, Max Sequence Number errors */
-
-/* key to IIO_PROTECT_OVRRD */
-#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */
-
-/* BTE register names */
-#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */
-#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */
-#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */
-#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */
-#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */
-#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */
-#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */
-#define IIO_BTE_OFF_1 (IIO_IBLS_1 - IIO_IBLS_0) /* Offset from base to BTE 1 */
-
-/* BTE register offsets from base */
-#define BTEOFF_STAT 0
-#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
-#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
-#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
-#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
-#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0)
-
-/* names used in shub diags */
-#define IIO_BASE_BTE0 IIO_IBLS_0
-#define IIO_BASE_BTE1 IIO_IBLS_1
-
-/*
- * Macro which takes the widget number, and returns the
- * IO PRB address of that widget.
- * value _x is expected to be a widget number in the range
- * 0, 8 - 0xF
- */
-#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
- (_x) : \
- (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
-
-/* GFX Flow Control Node/Widget Register */
-#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */
-#define IIO_IGFX_W_NUM_MASK ((1<<IIO_IGFX_W_NUM_BITS)-1)
-#define IIO_IGFX_W_NUM_SHIFT 0
-#define IIO_IGFX_PI_NUM_BITS 1 /* size of PI num field */
-#define IIO_IGFX_PI_NUM_MASK ((1<<IIO_IGFX_PI_NUM_BITS)-1)
-#define IIO_IGFX_PI_NUM_SHIFT 4
-#define IIO_IGFX_N_NUM_BITS 8 /* size of node num field */
-#define IIO_IGFX_N_NUM_MASK ((1<<IIO_IGFX_N_NUM_BITS)-1)
-#define IIO_IGFX_N_NUM_SHIFT 5
-#define IIO_IGFX_P_NUM_BITS 1 /* size of processor num field */
-#define IIO_IGFX_P_NUM_MASK ((1<<IIO_IGFX_P_NUM_BITS)-1)
-#define IIO_IGFX_P_NUM_SHIFT 16
-#define IIO_IGFX_INIT(widget, pi, node, cpu) (\
- (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \
- (((pi) & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)| \
- (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \
- (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT))
-
-/* Scratch registers (all bits available) */
-#define IIO_SCRATCH_REG0 IIO_ISCR0
-#define IIO_SCRATCH_REG1 IIO_ISCR1
-#define IIO_SCRATCH_MASK 0xffffffffffffffffUL
-
-#define IIO_SCRATCH_BIT0_0 0x0000000000000001UL
-#define IIO_SCRATCH_BIT0_1 0x0000000000000002UL
-#define IIO_SCRATCH_BIT0_2 0x0000000000000004UL
-#define IIO_SCRATCH_BIT0_3 0x0000000000000008UL
-#define IIO_SCRATCH_BIT0_4 0x0000000000000010UL
-#define IIO_SCRATCH_BIT0_5 0x0000000000000020UL
-#define IIO_SCRATCH_BIT0_6 0x0000000000000040UL
-#define IIO_SCRATCH_BIT0_7 0x0000000000000080UL
-#define IIO_SCRATCH_BIT0_8 0x0000000000000100UL
-#define IIO_SCRATCH_BIT0_9 0x0000000000000200UL
-#define IIO_SCRATCH_BIT0_A 0x0000000000000400UL
-
-#define IIO_SCRATCH_BIT1_0 0x0000000000000001UL
-#define IIO_SCRATCH_BIT1_1 0x0000000000000002UL
-/* IO Translation Table Entries */
-#define IIO_NUM_ITTES 7 /* ITTEs numbered 0..6 */
- /* Hw manuals number them 1..7! */
-/*
- * IIO_IMEM Register fields.
- */
-#define IIO_IMEM_W0ESD 0x1UL /* Widget 0 shut down due to error */
-#define IIO_IMEM_B0ESD (1UL << 4) /* BTE 0 shut down due to error */
-#define IIO_IMEM_B1ESD (1UL << 8) /* BTE 1 Shut down due to error */
-
-/*
- * As a permanent workaround for a bug in the PI side of the shub, we've
- * redefined big window 7 as small window 0.
- XXX does this still apply for SN1??
- */
-#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1)
-
-/*
- * Use the top big window as a surrogate for the first small window
- */
-#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW
-
-#define ILCSR_WARM_RESET 0x100
-
-/*
- * CRB manipulation macros
- * The CRB macros are slightly complicated, since there are up to
- * four registers associated with each CRB entry.
- */
-#define IIO_NUM_CRBS 15 /* Number of CRBs */
-#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */
-#define IIO_ICRB_OFFSET 8
-#define IIO_ICRB_0 IIO_ICRB0_A
-#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */
-/* XXX - This is now tuneable:
- #define IIO_FIRST_PC_ENTRY 12
- */
-
-#define IIO_ICRB_A(_x) ((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x))))
-#define IIO_ICRB_B(_x) ((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET))
-#define IIO_ICRB_C(_x) ((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET))
-#define IIO_ICRB_D(_x) ((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET))
-#define IIO_ICRB_E(_x) ((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET))
-
-#define TNUM_TO_WIDGET_DEV(_tnum) (_tnum & 0x7)
-
-/*
- * values for "ecode" field
- */
-#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */
-#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */
-#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access
- * e.g. WINV to a Read only line. */
-#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */
-#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */
-#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */
-#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */
-#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */
-
-/*
- * Values for field imsgtype
- */
-#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming message from Xtalk */
-#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */
-#define IIO_ICRB_IMSGT_SN1NET 2 /* Incoming message from SN1 net */
-#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */
-
-/*
- * values for field initiator.
- */
-#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */
-#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */
-#define IIO_ICRB_INIT_SN1NET 0x2 /* Message originated in SN1net */
-#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */
-#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */
-
-/*
- * Number of credits Hub widget has while sending req/response to
- * xbow.
- * Value of 3 is required by Xbow 1.1
- * We may be able to increase this to 4 with Xbow 1.2.
- */
-#define HUBII_XBOW_CREDIT 3
-#define HUBII_XBOW_REV2_CREDIT 4
-
-/*
- * Number of credits that xtalk devices should use when communicating
- * with a SHub (depth of SHub's queue).
- */
-#define HUB_CREDIT 4
-
-/*
- * Some IIO_PRB fields
- */
-#define IIO_PRB_MULTI_ERR (1LL << 63)
-#define IIO_PRB_SPUR_RD (1LL << 51)
-#define IIO_PRB_SPUR_WR (1LL << 50)
-#define IIO_PRB_RD_TO (1LL << 49)
-#define IIO_PRB_ERROR (1LL << 48)
-
-/*************************************************************************
-
- Some of the IIO field masks and shifts are defined here.
- This is in order to maintain compatibility in SN0 and SN1 code
-
-**************************************************************************/
-
-/*
- * ICMR register fields
- * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not
- * present in SHub)
- */
-
-#define IIO_ICMR_CRB_VLD_SHFT 20
-#define IIO_ICMR_CRB_VLD_MASK (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
-
-#define IIO_ICMR_FC_CNT_SHFT 16
-#define IIO_ICMR_FC_CNT_MASK (0xf << IIO_ICMR_FC_CNT_SHFT)
-
-#define IIO_ICMR_C_CNT_SHFT 4
-#define IIO_ICMR_C_CNT_MASK (0xf << IIO_ICMR_C_CNT_SHFT)
-
-#define IIO_ICMR_PRECISE (1UL << 52)
-#define IIO_ICMR_CLR_RPPD (1UL << 13)
-#define IIO_ICMR_CLR_RQPD (1UL << 12)
-
-/*
- * IIO PIO Deallocation register field masks : (IIO_IPDR)
- XXX present but not needed in bedrock? See the manual.
- */
-#define IIO_IPDR_PND (1 << 4)
-
-/*
- * IIO CRB deallocation register field masks: (IIO_ICDR)
- */
-#define IIO_ICDR_PND (1 << 4)
-
-/*
- * IO BTE Length/Status (IIO_IBLS) register bit field definitions
- */
-#define IBLS_BUSY (0x1UL << 20)
-#define IBLS_ERROR_SHFT 16
-#define IBLS_ERROR (0x1UL << IBLS_ERROR_SHFT)
-#define IBLS_LENGTH_MASK 0xffff
-
-/*
- * IO BTE Control/Terminate register (IBCT) register bit field definitions
- */
-#define IBCT_POISON (0x1UL << 8)
-#define IBCT_NOTIFY (0x1UL << 4)
-#define IBCT_ZFIL_MODE (0x1UL << 0)
-
-/*
- * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2)
- */
-#define IIEPH1_VALID (1UL << 44)
-#define IIEPH1_OVERRUN (1UL << 40)
-#define IIEPH1_ERR_TYPE_SHFT 32
-#define IIEPH1_ERR_TYPE_MASK 0xf
-#define IIEPH1_SOURCE_SHFT 20
-#define IIEPH1_SOURCE_MASK 11
-#define IIEPH1_SUPPL_SHFT 8
-#define IIEPH1_SUPPL_MASK 11
-#define IIEPH1_CMD_SHFT 0
-#define IIEPH1_CMD_MASK 7
-
-#define IIEPH2_TAIL (1UL << 40)
-#define IIEPH2_ADDRESS_SHFT 0
-#define IIEPH2_ADDRESS_MASK 38
-
-#define IIEPH1_ERR_SHORT_REQ 2
-#define IIEPH1_ERR_SHORT_REPLY 3
-#define IIEPH1_ERR_LONG_REQ 4
-#define IIEPH1_ERR_LONG_REPLY 5
-
-/*
- * IO Error Clear register bit field definitions
- */
-#define IECLR_PI1_FWD_INT (1UL << 31) /* clear PI1_FORWARD_INT in iidsr */
-#define IECLR_PI0_FWD_INT (1UL << 30) /* clear PI0_FORWARD_INT in iidsr */
-#define IECLR_SPUR_RD_HDR (1UL << 29) /* clear valid bit in ixss reg */
-#define IECLR_BTE1 (1UL << 18) /* clear bte error 1 */
-#define IECLR_BTE0 (1UL << 17) /* clear bte error 0 */
-#define IECLR_CRAZY (1UL << 16) /* clear crazy bit in wstat reg */
-#define IECLR_PRB_F (1UL << 15) /* clear err bit in PRB_F reg */
-#define IECLR_PRB_E (1UL << 14) /* clear err bit in PRB_E reg */
-#define IECLR_PRB_D (1UL << 13) /* clear err bit in PRB_D reg */
-#define IECLR_PRB_C (1UL << 12) /* clear err bit in PRB_C reg */
-#define IECLR_PRB_B (1UL << 11) /* clear err bit in PRB_B reg */
-#define IECLR_PRB_A (1UL << 10) /* clear err bit in PRB_A reg */
-#define IECLR_PRB_9 (1UL << 9) /* clear err bit in PRB_9 reg */
-#define IECLR_PRB_8 (1UL << 8) /* clear err bit in PRB_8 reg */
-#define IECLR_PRB_0 (1UL << 0) /* clear err bit in PRB_0 reg */
-
-/*
- * IIO CRB control register Fields: IIO_ICCR
- */
-#define IIO_ICCR_PENDING 0x10000
-#define IIO_ICCR_CMD_MASK 0xFF
-#define IIO_ICCR_CMD_SHFT 7
-#define IIO_ICCR_CMD_NOP 0x0 /* No Op */
-#define IIO_ICCR_CMD_WAKE 0x100 /* Reactivate CRB entry and process */
-#define IIO_ICCR_CMD_TIMEOUT 0x200 /* Make CRB timeout & mark invalid */
-#define IIO_ICCR_CMD_EJECT 0x400 /* Contents of entry written to memory
- * via a WB
- */
-#define IIO_ICCR_CMD_FLUSH 0x800
-
-/*
- *
- * CRB Register description.
- *
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- *
- * Many of the fields in CRB are status bits used by hardware
- * for implementation of the protocol. It's very dangerous to
- * mess around with the CRB registers.
- *
- * It's OK to read the CRB registers and try to make sense out of the
- * fields in CRB.
- *
- * Updating CRB requires all activities in Hub IIO to be quiesced.
- * otherwise, a write to CRB could corrupt other CRB entries.
- * CRBs are here only as a back door peek to shub IIO's status.
- * Quiescing implies no dmas no PIOs
- * either directly from the cpu or from sn0net.
- * this is not something that can be done easily. So, AVOID updating
- * CRBs.
- */
-
-/*
- * Easy access macros for CRBs, all 5 registers (A-E)
- */
-typedef ii_icrb0_a_u_t icrba_t;
-#define a_sidn ii_icrb0_a_fld_s.ia_sidn
-#define a_tnum ii_icrb0_a_fld_s.ia_tnum
-#define a_addr ii_icrb0_a_fld_s.ia_addr
-#define a_valid ii_icrb0_a_fld_s.ia_vld
-#define a_iow ii_icrb0_a_fld_s.ia_iow
-#define a_regvalue ii_icrb0_a_regval
-
-typedef ii_icrb0_b_u_t icrbb_t;
-#define b_use_old ii_icrb0_b_fld_s.ib_use_old
-#define b_imsgtype ii_icrb0_b_fld_s.ib_imsgtype
-#define b_imsg ii_icrb0_b_fld_s.ib_imsg
-#define b_initiator ii_icrb0_b_fld_s.ib_init
-#define b_exc ii_icrb0_b_fld_s.ib_exc
-#define b_ackcnt ii_icrb0_b_fld_s.ib_ack_cnt
-#define b_resp ii_icrb0_b_fld_s.ib_resp
-#define b_ack ii_icrb0_b_fld_s.ib_ack
-#define b_hold ii_icrb0_b_fld_s.ib_hold
-#define b_wb ii_icrb0_b_fld_s.ib_wb
-#define b_intvn ii_icrb0_b_fld_s.ib_intvn
-#define b_stall_ib ii_icrb0_b_fld_s.ib_stall_ib
-#define b_stall_int ii_icrb0_b_fld_s.ib_stall__intr
-#define b_stall_bte_0 ii_icrb0_b_fld_s.ib_stall__bte_0
-#define b_stall_bte_1 ii_icrb0_b_fld_s.ib_stall__bte_1
-#define b_error ii_icrb0_b_fld_s.ib_error
-#define b_ecode ii_icrb0_b_fld_s.ib_errcode
-#define b_lnetuce ii_icrb0_b_fld_s.ib_ln_uce
-#define b_mark ii_icrb0_b_fld_s.ib_mark
-#define b_xerr ii_icrb0_b_fld_s.ib_xt_err
-#define b_regvalue ii_icrb0_b_regval
-
-typedef ii_icrb0_c_u_t icrbc_t;
-#define c_suppl ii_icrb0_c_fld_s.ic_suppl
-#define c_barrop ii_icrb0_c_fld_s.ic_bo
-#define c_doresp ii_icrb0_c_fld_s.ic_resprqd
-#define c_gbr ii_icrb0_c_fld_s.ic_gbr
-#define c_btenum ii_icrb0_c_fld_s.ic_bte_num
-#define c_cohtrans ii_icrb0_c_fld_s.ic_ct
-#define c_xtsize ii_icrb0_c_fld_s.ic_size
-#define c_source ii_icrb0_c_fld_s.ic_source
-#define c_regvalue ii_icrb0_c_regval
-
-typedef ii_icrb0_d_u_t icrbd_t;
-#define d_sleep ii_icrb0_d_fld_s.id_sleep
-#define d_pricnt ii_icrb0_d_fld_s.id_pr_cnt
-#define d_pripsc ii_icrb0_d_fld_s.id_pr_psc
-#define d_bteop ii_icrb0_d_fld_s.id_bte_op
-#define d_bteaddr ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names */
-#define d_benable ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names */
-#define d_regvalue ii_icrb0_d_regval
-
-typedef ii_icrb0_e_u_t icrbe_t;
-#define icrbe_ctxtvld ii_icrb0_e_fld_s.ie_cvld
-#define icrbe_toutvld ii_icrb0_e_fld_s.ie_tvld
-#define icrbe_context ii_icrb0_e_fld_s.ie_context
-#define icrbe_timeout ii_icrb0_e_fld_s.ie_timeout
-#define e_regvalue ii_icrb0_e_regval
-
-/* Number of widgets supported by shub */
-#define HUB_NUM_WIDGET 9
-#define HUB_WIDGET_ID_MIN 0x8
-#define HUB_WIDGET_ID_MAX 0xf
-
-#define HUB_WIDGET_PART_NUM 0xc120
-#define MAX_HUBS_PER_XBOW 2
-
-/* A few more #defines for backwards compatibility */
-#define iprb_t ii_iprb0_u_t
-#define iprb_regval ii_iprb0_regval
-#define iprb_mult_err ii_iprb0_fld_s.i_mult_err
-#define iprb_spur_rd ii_iprb0_fld_s.i_spur_rd
-#define iprb_spur_wr ii_iprb0_fld_s.i_spur_wr
-#define iprb_rd_to ii_iprb0_fld_s.i_rd_to
-#define iprb_ovflow ii_iprb0_fld_s.i_of_cnt
-#define iprb_error ii_iprb0_fld_s.i_error
-#define iprb_ff ii_iprb0_fld_s.i_f
-#define iprb_mode ii_iprb0_fld_s.i_m
-#define iprb_bnakctr ii_iprb0_fld_s.i_nb
-#define iprb_anakctr ii_iprb0_fld_s.i_na
-#define iprb_xtalkctr ii_iprb0_fld_s.i_c
-
-#define LNK_STAT_WORKING 0x2 /* LLP is working */
-
-#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */
-#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */
-#define IIO_WSTAT_TXRETRY_MASK 0x7F /* should be 0xFF?? */
-#define IIO_WSTAT_TXRETRY_SHFT 16
-#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
- IIO_WSTAT_TXRETRY_MASK)
-
-/* Number of II perf. counters we can multiplex at once */
-
-#define IO_PERF_SETS 32
-
-/* Bit for the widget in inbound access register */
-#define IIO_IIWA_WIDGET(_w) ((u64)(1ULL << _w))
-/* Bit for the widget in outbound access register */
-#define IIO_IOWA_WIDGET(_w) ((u64)(1ULL << _w))
-
-/* NOTE: The following define assumes that we are going to get
- * widget numbers from 8 thru F and the device numbers within
- * widget from 0 thru 7.
- */
-#define IIO_IIDEM_WIDGETDEV_MASK(w, d) ((u64)(1ULL << (8 * ((w) - 8) + (d))))
-
-/* IO Interrupt Destination Register */
-#define IIO_IIDSR_SENT_SHIFT 28
-#define IIO_IIDSR_SENT_MASK 0x30000000
-#define IIO_IIDSR_ENB_SHIFT 24
-#define IIO_IIDSR_ENB_MASK 0x01000000
-#define IIO_IIDSR_NODE_SHIFT 9
-#define IIO_IIDSR_NODE_MASK 0x000ff700
-#define IIO_IIDSR_PI_ID_SHIFT 8
-#define IIO_IIDSR_PI_ID_MASK 0x00000100
-#define IIO_IIDSR_LVL_SHIFT 0
-#define IIO_IIDSR_LVL_MASK 0x000000ff
-
-/* Xtalk timeout threshold register (IIO_IXTT) */
-#define IXTT_RRSP_TO_SHFT 55 /* read response timeout */
-#define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT)
-#define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */
-#define IXTT_RRSP_PS_MASK (0x7FFFFFULL << IXTT_RRSP_PS_SHFT)
-#define IXTT_TAIL_TO_SHFT 0 /* tail timeout counter threshold */
-#define IXTT_TAIL_TO_MASK (0x3FFFFFFULL << IXTT_TAIL_TO_SHFT)
-
-/*
- * The IO LLP control status register and widget control register
- */
-
-typedef union hubii_wcr_u {
- u64 wcr_reg_value;
- struct {
- u64 wcr_widget_id:4, /* LLP crossbar credit */
- wcr_tag_mode:1, /* Tag mode */
- wcr_rsvd1:8, /* Reserved */
- wcr_xbar_crd:3, /* LLP crossbar credit */
- wcr_f_bad_pkt:1, /* Force bad llp pkt enable */
- wcr_dir_con:1, /* widget direct connect */
- wcr_e_thresh:5, /* elasticity threshold */
- wcr_rsvd:41; /* unused */
- } wcr_fields_s;
-} hubii_wcr_t;
-
-#define iwcr_dir_con wcr_fields_s.wcr_dir_con
-
-/* The structures below are defined to extract and modify the ii
-performance registers */
-
-/* io_perf_sel allows the caller to specify what tests will be
- performed */
-
-typedef union io_perf_sel {
- u64 perf_sel_reg;
- struct {
- u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48;
- } perf_sel_bits;
-} io_perf_sel_t;
-
-/* io_perf_cnt is to extract the count from the shub registers. Due to
- hardware problems there is only one counter, not two. */
-
-typedef union io_perf_cnt {
- u64 perf_cnt;
- struct {
- u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32;
- } perf_cnt_bits;
-
-} io_perf_cnt_t;
-
-typedef union iprte_a {
- u64 entry;
- struct {
- u64 i_rsvd_1:3;
- u64 i_addr:38;
- u64 i_init:3;
- u64 i_source:8;
- u64 i_rsvd:2;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } iprte_fields;
-} iprte_a_t;
-
-#endif /* _ASM_IA64_SN_SHUBIO_H */
diff --git a/arch/ia64/include/asm/sn/simulator.h b/arch/ia64/include/asm/sn/simulator.h
index c2611f6cfe33..3e4557df3b7c 100644
--- a/arch/ia64/include/asm/sn/simulator.h
+++ b/arch/ia64/include/asm/sn/simulator.h
@@ -8,7 +8,7 @@
#ifndef _ASM_IA64_SN_SIMULATOR_H
#define _ASM_IA64_SN_SIMULATOR_H
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV)
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_UV)
#define SNMAGIC 0xaeeeeeee8badbeefL
#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
diff --git a/arch/ia64/include/asm/sn/sn2/sn_hwperf.h b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
deleted file mode 100644
index e61ebac38cdd..000000000000
--- a/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
- *
- * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring
- * SGI Altix node and router hardware
- *
- * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004
- */
-
-#ifndef SN_HWPERF_H
-#define SN_HWPERF_H
-
-/*
- * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO
- * return an array of these. Do not change this without also
- * changing the corresponding SAL code.
- */
-#define SN_HWPERF_MAXSTRING 128
-struct sn_hwperf_object_info {
- u32 id;
- union {
- struct {
- u64 this_part:1;
- u64 is_shared:1;
- } fields;
- struct {
- u64 flags;
- u64 reserved;
- } b;
- } f;
- char name[SN_HWPERF_MAXSTRING];
- char location[SN_HWPERF_MAXSTRING];
- u32 ports;
-};
-
-#define sn_hwp_this_part f.fields.this_part
-#define sn_hwp_is_shared f.fields.is_shared
-#define sn_hwp_flags f.b.flags
-
-/* macros for object classification */
-#define SN_HWPERF_IS_NODE(x) ((x) && strstr((x)->name, "SHub"))
-#define SN_HWPERF_IS_NODE_SHUB2(x) ((x) && strstr((x)->name, "SHub 2."))
-#define SN_HWPERF_IS_IONODE(x) ((x) && strstr((x)->name, "TIO"))
-#define SN_HWPERF_IS_NL3ROUTER(x) ((x) && strstr((x)->name, "NL3Router"))
-#define SN_HWPERF_IS_NL4ROUTER(x) ((x) && strstr((x)->name, "NL4Router"))
-#define SN_HWPERF_IS_OLDROUTER(x) ((x) && strstr((x)->name, "Router"))
-#define SN_HWPERF_IS_ROUTER(x) (SN_HWPERF_IS_NL3ROUTER(x) || \
- SN_HWPERF_IS_NL4ROUTER(x) || \
- SN_HWPERF_IS_OLDROUTER(x))
-#define SN_HWPERF_FOREIGN(x) ((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
-#define SN_HWPERF_SAME_OBJTYPE(x,y) ((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
- (SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
- (SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y)))
-
-/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */
-struct sn_hwperf_port_info {
- u32 port;
- u32 conn_id;
- u32 conn_port;
-};
-
-/* for HWPERF_{GET,SET}_MMRS */
-struct sn_hwperf_data {
- u64 addr;
- u64 data;
-};
-
-/* user ioctl() argument, see below */
-struct sn_hwperf_ioctl_args {
- u64 arg; /* argument, usually an object id */
- u64 sz; /* size of transfer */
- void *ptr; /* pointer to source/target */
- u32 v0; /* second return value */
-};
-
-/*
- * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE,
- * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which
- * to call SAL, and whether to use an interprocessor interrupt
- * or task migration in order to do so. If the CPU specified is
- * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used.
- */
-#define SN_HWPERF_ARG_ANY_CPU 0x7fffffffUL
-#define SN_HWPERF_ARG_CPU_MASK 0x7fffffff00000000ULL
-#define SN_HWPERF_ARG_USE_IPI_MASK 0x8000000000000000ULL
-#define SN_HWPERF_ARG_OBJID_MASK 0x00000000ffffffffULL
-
-/*
- * ioctl requests on the "sn_hwperf" misc device that call SAL.
- */
-#define SN_HWPERF_OP_MEM_COPYIN 0x1000
-#define SN_HWPERF_OP_MEM_COPYOUT 0x2000
-#define SN_HWPERF_OP_MASK 0x0fff
-
-/*
- * Determine mem requirement.
- * arg don't care
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_GET_HEAPSIZE 1
-
-/*
- * Install mem for SAL drvr
- * arg don't care
- * sz sizeof buffer pointed to by p
- * p pointer to buffer for scratch area
- */
-#define SN_HWPERF_INSTALL_HEAP 2
-
-/*
- * Determine number of objects
- * arg don't care
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_OBJECT_COUNT (10|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Determine object "distance", relative to a cpu. This operation can
- * execute on a designated logical cpu number, using either an IPI or
- * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
- * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
- *
- * arg bitmap of IPI flag, cpu number and object id
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_OBJECT_DISTANCE (11|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Enumerate objects. Special case if sz == 8, returns the required
- * buffer size.
- * arg don't care
- * sz sizeof buffer pointed to by p
- * p pointer to array of struct sn_hwperf_object_info
- */
-#define SN_HWPERF_ENUM_OBJECTS (12|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Enumerate NumaLink ports for an object. Special case if sz == 8,
- * returns the required buffer size.
- * arg object id
- * sz sizeof buffer pointed to by p
- * p pointer to array of struct sn_hwperf_port_info
- */
-#define SN_HWPERF_ENUM_PORTS (13|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * SET/GET memory mapped registers. These operations can execute
- * on a designated logical cpu number, using either an IPI or via
- * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
- * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
- *
- * arg bitmap of ipi flag, cpu number and object id
- * sz sizeof buffer pointed to by p
- * p pointer to array of struct sn_hwperf_data
- */
-#define SN_HWPERF_SET_MMRS (14|SN_HWPERF_OP_MEM_COPYIN)
-#define SN_HWPERF_GET_MMRS (15|SN_HWPERF_OP_MEM_COPYOUT| \
- SN_HWPERF_OP_MEM_COPYIN)
-/*
- * Lock a shared object
- * arg object id
- * sz don't care
- * p don't care
- */
-#define SN_HWPERF_ACQUIRE 16
-
-/*
- * Unlock a shared object
- * arg object id
- * sz don't care
- * p don't care
- */
-#define SN_HWPERF_RELEASE 17
-
-/*
- * Break a lock on a shared object
- * arg object id
- * sz don't care
- * p don't care
- */
-#define SN_HWPERF_FORCE_RELEASE 18
-
-/*
- * ioctl requests on "sn_hwperf" that do not call SAL
- */
-
-/*
- * get cpu info as an array of hwperf_object_info_t.
- * id is logical CPU number, name is description, location
- * is geoid (e.g. 001c04#1c). Special case if sz == 8,
- * returns the required buffer size.
- *
- * arg don't care
- * sz sizeof buffer pointed to by p
- * p pointer to array of struct sn_hwperf_object_info
- */
-#define SN_HWPERF_GET_CPU_INFO (100|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Given an object id, return it's node number (aka cnode).
- * arg object id
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_GET_OBJ_NODE (101|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Given a node number (cnode), return it's nasid.
- * arg ordinal node number (aka cnodeid)
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_GET_NODE_NASID (102|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Given a node id, determine the id of the nearest node with CPUs
- * and the id of the nearest node that has memory. The argument
- * node would normally be a "headless" node, e.g. an "IO node".
- * Return 0 on success.
- */
-extern int sn_hwperf_get_nearest_node(cnodeid_t node,
- cnodeid_t *near_mem, cnodeid_t *near_cpu);
-
-/* return codes */
-#define SN_HWPERF_OP_OK 0
-#define SN_HWPERF_OP_NOMEM 1
-#define SN_HWPERF_OP_NO_PERM 2
-#define SN_HWPERF_OP_IO_ERROR 3
-#define SN_HWPERF_OP_BUSY 4
-#define SN_HWPERF_OP_RECONFIGURE 253
-#define SN_HWPERF_OP_INVAL 254
-
-int sn_topology_open(struct inode *inode, struct file *file);
-int sn_topology_release(struct inode *inode, struct file *file);
-#endif /* SN_HWPERF_H */
diff --git a/arch/ia64/include/asm/sn/sn_cpuid.h b/arch/ia64/include/asm/sn/sn_cpuid.h
deleted file mode 100644
index a676dd9ace3e..000000000000
--- a/arch/ia64/include/asm/sn/sn_cpuid.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-
-#ifndef _ASM_IA64_SN_SN_CPUID_H
-#define _ASM_IA64_SN_SN_CPUID_H
-
-#include <linux/smp.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/pda.h>
-#include <asm/intrinsics.h>
-
-
-/*
- * Functions for converting between cpuids, nodeids and NASIDs.
- *
- * These are for SGI platforms only.
- *
- */
-
-
-
-
-/*
- * Definitions of terms (these definitions are for IA64 ONLY. Other architectures
- * use cpuid/cpunum quite defferently):
- *
- * CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies
- * the cpu. The value cpuid has no significance on IA64 other than
- * the boot cpu is 0.
- * smp_processor_id() returns the cpuid of the current cpu.
- *
- * CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID)
- * This is the same as 31:24 of the processor LID register
- * hard_smp_processor_id()- cpu_physical_id of current processor
- * cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
- * cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid>
- * * not real efficient - don't use in perf critical code
- *
- * SLICE - a number in the range of 0 - 3 (typically) that represents the
- * cpu number on a brick.
- *
- * SUBNODE - (almost obsolete) the number of the FSB that a cpu is
- * connected to. This is also the same as the PI number. Usually 0 or 1.
- *
- * NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no
- * significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM.
- *
- *
- * The macros convert between cpu physical ids & slice/nasid/cnodeid.
- * These terms are described below:
- *
- *
- * Brick
- * ----- ----- ----- ----- CPU
- * | 0 | | 1 | | 0 | | 1 | SLICE
- * ----- ----- ----- -----
- * | | | |
- * | | | |
- * 0 | | 2 0 | | 2 FSB SLOT
- * ------- -------
- * | |
- * | |
- * | |
- * ------------ -------------
- * | | | |
- * | SHUB | | SHUB | NASID (0..MAX_NASIDS)
- * | |----- | | CNODEID (0..num_compact_nodes-1)
- * | | | |
- * | | | |
- * ------------ -------------
- * | |
- *
- *
- */
-
-#define get_node_number(addr) NASID_GET(addr)
-
-/*
- * NOTE: on non-MP systems, only cpuid 0 exists
- */
-
-extern short physical_node_map[]; /* indexed by nasid to get cnode */
-
-/*
- * Macros for retrieving info about current cpu
- */
-#define get_nasid() (sn_nodepda->phys_cpuid[smp_processor_id()].nasid)
-#define get_subnode() (sn_nodepda->phys_cpuid[smp_processor_id()].subnode)
-#define get_slice() (sn_nodepda->phys_cpuid[smp_processor_id()].slice)
-#define get_cnode() (sn_nodepda->phys_cpuid[smp_processor_id()].cnode)
-#define get_sapicid() ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
-
-/*
- * Macros for retrieving info about an arbitrary cpu
- * cpuid - logical cpu id
- */
-#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid)
-#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode)
-#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice)
-
-
-/*
- * Dont use the following in performance critical code. They require scans
- * of potentially large tables.
- */
-extern int nasid_slice_to_cpuid(int, int);
-
-/*
- * cnodeid_to_nasid - convert a cnodeid to a NASID
- */
-#define cnodeid_to_nasid(cnodeid) (sn_cnodeid_to_nasid[cnodeid])
-
-/*
- * nasid_to_cnodeid - convert a NASID to a cnodeid
- */
-#define nasid_to_cnodeid(nasid) (physical_node_map[nasid])
-
-/*
- * partition_coherence_id - get the coherence ID of the current partition
- */
-extern u8 sn_coherency_id;
-#define partition_coherence_id() (sn_coherency_id)
-
-#endif /* _ASM_IA64_SN_SN_CPUID_H */
-
diff --git a/arch/ia64/include/asm/sn/sn_feature_sets.h b/arch/ia64/include/asm/sn/sn_feature_sets.h
deleted file mode 100644
index 8e83ac117ace..000000000000
--- a/arch/ia64/include/asm/sn/sn_feature_sets.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef _ASM_IA64_SN_FEATURE_SETS_H
-#define _ASM_IA64_SN_FEATURE_SETS_H
-
-/*
- * SN PROM Features
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005-2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-
-/* --------------------- PROM Features -----------------------------*/
-extern int sn_prom_feature_available(int id);
-
-#define MAX_PROM_FEATURE_SETS 2
-
-/*
- * The following defines features that may or may not be supported by the
- * current PROM. The OS uses sn_prom_feature_available(feature) to test for
- * the presence of a PROM feature. Down rev (old) PROMs will always test
- * "false" for new features.
- *
- * Use:
- * if (sn_prom_feature_available(PRF_XXX))
- * ...
- */
-
-#define PRF_PAL_CACHE_FLUSH_SAFE 0
-#define PRF_DEVICE_FLUSH_LIST 1
-#define PRF_HOTPLUG_SUPPORT 2
-#define PRF_CPU_DISABLE_SUPPORT 3
-
-/* --------------------- OS Features -------------------------------*/
-
-/*
- * The following defines OS features that are optionally present in
- * the operating system.
- * During boot, PROM is notified of these features via a series of calls:
- *
- * ia64_sn_set_os_feature(feature1);
- *
- * Once enabled, a feature cannot be disabled.
- *
- * By default, features are disabled unless explicitly enabled.
- *
- * These defines must be kept in sync with the corresponding
- * PROM definitions in feature_sets.h.
- */
-#define OSF_MCA_SLV_TO_OS_INIT_SLV 0
-#define OSF_FEAT_LOG_SBES 1
-#define OSF_ACPI_ENABLE 2
-#define OSF_PCISEGMENT_ENABLE 3
-
-
-#endif /* _ASM_IA64_SN_FEATURE_SETS_H */
diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h
index 1f5ff470a5a1..48b88d0807db 100644
--- a/arch/ia64/include/asm/sn/sn_sal.h
+++ b/arch/ia64/include/asm/sn/sn_sal.h
@@ -11,140 +11,17 @@
* Copyright (c) 2000-2006 Silicon Graphics, Inc. All rights reserved.
*/
-
+#include <linux/types.h>
#include <asm/sal.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/shub_mmr.h>
// SGI Specific Calls
-#define SN_SAL_POD_MODE 0x02000001
-#define SN_SAL_SYSTEM_RESET 0x02000002
-#define SN_SAL_PROBE 0x02000003
-#define SN_SAL_GET_MASTER_NASID 0x02000004
-#define SN_SAL_GET_KLCONFIG_ADDR 0x02000005
-#define SN_SAL_LOG_CE 0x02000006
-#define SN_SAL_REGISTER_CE 0x02000007
#define SN_SAL_GET_PARTITION_ADDR 0x02000009
-#define SN_SAL_XP_ADDR_REGION 0x0200000f
-#define SN_SAL_NO_FAULT_ZONE_VIRTUAL 0x02000010
-#define SN_SAL_NO_FAULT_ZONE_PHYSICAL 0x02000011
-#define SN_SAL_PRINT_ERROR 0x02000012
-#define SN_SAL_REGISTER_PMI_HANDLER 0x02000014
-#define SN_SAL_SET_ERROR_HANDLING_FEATURES 0x0200001a // reentrant
-#define SN_SAL_GET_FIT_COMPT 0x0200001b // reentrant
-#define SN_SAL_GET_SAPIC_INFO 0x0200001d
-#define SN_SAL_GET_SN_INFO 0x0200001e
-#define SN_SAL_CONSOLE_PUTC 0x02000021
-#define SN_SAL_CONSOLE_GETC 0x02000022
-#define SN_SAL_CONSOLE_PUTS 0x02000023
-#define SN_SAL_CONSOLE_GETS 0x02000024
-#define SN_SAL_CONSOLE_GETS_TIMEOUT 0x02000025
-#define SN_SAL_CONSOLE_POLL 0x02000026
-#define SN_SAL_CONSOLE_INTR 0x02000027
-#define SN_SAL_CONSOLE_PUTB 0x02000028
-#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a
-#define SN_SAL_CONSOLE_READC 0x0200002b
-#define SN_SAL_SYSCTL_OP 0x02000030
-#define SN_SAL_SYSCTL_MODID_GET 0x02000031
-#define SN_SAL_SYSCTL_GET 0x02000032
-#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033
-#define SN_SAL_SYSCTL_IO_PORTSPEED_GET 0x02000035
-#define SN_SAL_SYSCTL_SLAB_GET 0x02000036
-#define SN_SAL_BUS_CONFIG 0x02000037
-#define SN_SAL_SYS_SERIAL_GET 0x02000038
-#define SN_SAL_PARTITION_SERIAL_GET 0x02000039
-#define SN_SAL_SYSCTL_PARTITION_GET 0x0200003a
-#define SN_SAL_SYSTEM_POWER_DOWN 0x0200003b
-#define SN_SAL_GET_MASTER_BASEIO_NASID 0x0200003c
-#define SN_SAL_COHERENCE 0x0200003d
#define SN_SAL_MEMPROTECT 0x0200003e
-#define SN_SAL_SYSCTL_FRU_CAPTURE 0x0200003f
-
-#define SN_SAL_SYSCTL_IOBRICK_PCI_OP 0x02000042 // reentrant
-#define SN_SAL_IROUTER_OP 0x02000043
-#define SN_SAL_SYSCTL_EVENT 0x02000044
-#define SN_SAL_IOIF_INTERRUPT 0x0200004a
-#define SN_SAL_HWPERF_OP 0x02000050 // lock
-#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051
-#define SN_SAL_IOIF_PCI_SAFE 0x02000052
-#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053
-#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054
-#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055
-#define SN_SAL_IOIF_GET_PCIBUS_INFO 0x02000056
-#define SN_SAL_IOIF_GET_PCIDEV_INFO 0x02000057
-#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058 // deprecated
-#define SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST 0x0200005a
-
-#define SN_SAL_IOIF_INIT 0x0200005f
-#define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060
-#define SN_SAL_BTE_RECOVER 0x02000061
-#define SN_SAL_RESERVED_DO_NOT_USE 0x02000062
-#define SN_SAL_IOIF_GET_PCI_TOPOLOGY 0x02000064
-
-#define SN_SAL_GET_PROM_FEATURE_SET 0x02000065
-#define SN_SAL_SET_OS_FEATURE_SET 0x02000066
-#define SN_SAL_INJECT_ERROR 0x02000067
-#define SN_SAL_SET_CPU_NUMBER 0x02000068
-#define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069
#define SN_SAL_WATCHLIST_ALLOC 0x02000070
#define SN_SAL_WATCHLIST_FREE 0x02000071
/*
- * Service-specific constants
- */
-
-/* Console interrupt manipulation */
- /* action codes */
-#define SAL_CONSOLE_INTR_OFF 0 /* turn the interrupt off */
-#define SAL_CONSOLE_INTR_ON 1 /* turn the interrupt on */
-#define SAL_CONSOLE_INTR_STATUS 2 /* retrieve the interrupt status */
- /* interrupt specification & status return codes */
-#define SAL_CONSOLE_INTR_XMIT 1 /* output interrupt */
-#define SAL_CONSOLE_INTR_RECV 2 /* input interrupt */
-
-/* interrupt handling */
-#define SAL_INTR_ALLOC 1
-#define SAL_INTR_FREE 2
-#define SAL_INTR_REDIRECT 3
-
-/*
- * operations available on the generic SN_SAL_SYSCTL_OP
- * runtime service
- */
-#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */
-#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */
-
-/*
- * IRouter (i.e. generalized system controller) operations
- */
-#define SAL_IROUTER_OPEN 0 /* open a subchannel */
-#define SAL_IROUTER_CLOSE 1 /* close a subchannel */
-#define SAL_IROUTER_SEND 2 /* send part of an IRouter packet */
-#define SAL_IROUTER_RECV 3 /* receive part of an IRouter packet */
-#define SAL_IROUTER_INTR_STATUS 4 /* check the interrupt status for
- * an open subchannel
- */
-#define SAL_IROUTER_INTR_ON 5 /* enable an interrupt */
-#define SAL_IROUTER_INTR_OFF 6 /* disable an interrupt */
-#define SAL_IROUTER_INIT 7 /* initialize IRouter driver */
-
-/* IRouter interrupt mask bits */
-#define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT
-#define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV
-
-/*
- * Error Handling Features
- */
-#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV 0x1 // obsolete
-#define SAL_ERR_FEAT_LOG_SBES 0x2 // obsolete
-#define SAL_ERR_FEAT_MFR_OVERRIDE 0x4
-#define SAL_ERR_FEAT_SBE_THRESHOLD 0xffff0000
-
-/*
* SAL Error Codes
*/
#define SALRET_MORE_PASSES 1
@@ -155,456 +32,6 @@
#define SN_SAL_FAKE_PROM 0x02009999
-/**
- * sn_sal_revision - get the SGI SAL revision number
- *
- * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor).
- * This routine simply extracts the major and minor values and
- * presents them in a u32 format.
- *
- * For example, version 4.05 would be represented at 0x0405.
- */
-static inline u32
-sn_sal_rev(void)
-{
- struct ia64_sal_systab *systab = __va(efi.sal_systab);
-
- return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor);
-}
-
-/*
- * Returns the master console nasid, if the call fails, return an illegal
- * value.
- */
-static inline u64
-ia64_sn_get_console_nasid(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0);
-
- if (ret_stuff.status < 0)
- return ret_stuff.status;
-
- /* Master console nasid is in 'v0' */
- return ret_stuff.v0;
-}
-
-/*
- * Returns the master baseio nasid, if the call fails, return an illegal
- * value.
- */
-static inline u64
-ia64_sn_get_master_baseio_nasid(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0);
-
- if (ret_stuff.status < 0)
- return ret_stuff.status;
-
- /* Master baseio nasid is in 'v0' */
- return ret_stuff.v0;
-}
-
-static inline void *
-ia64_sn_get_klconfig_addr(nasid_t nasid)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
- return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
-}
-
-/*
- * Returns the next console character.
- */
-static inline u64
-ia64_sn_console_getc(int *ch)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0);
-
- /* character is in 'v0' */
- *ch = (int)ret_stuff.v0;
-
- return ret_stuff.status;
-}
-
-/*
- * Read a character from the SAL console device, after a previous interrupt
- * or poll operation has given us to know that a character is available
- * to be read.
- */
-static inline u64
-ia64_sn_console_readc(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0);
-
- /* character is in 'v0' */
- return ret_stuff.v0;
-}
-
-/*
- * Sends the given character to the console.
- */
-static inline u64
-ia64_sn_console_putc(char ch)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0);
-
- return ret_stuff.status;
-}
-
-/*
- * Sends the given buffer to the console.
- */
-static inline u64
-ia64_sn_console_putb(const char *buf, int len)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0);
-
- if ( ret_stuff.status == 0 ) {
- return ret_stuff.v0;
- }
- return (u64)0;
-}
-
-/*
- * Print a platform error record
- */
-static inline u64
-ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0);
-
- return ret_stuff.status;
-}
-
-/*
- * Check for Platform errors
- */
-static inline u64
-ia64_sn_plat_cpei_handler(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0);
-
- return ret_stuff.status;
-}
-
-/*
- * Set Error Handling Features (Obsolete)
- */
-static inline u64
-ia64_sn_plat_set_error_handling_features(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES,
- SAL_ERR_FEAT_LOG_SBES,
- 0, 0, 0, 0, 0, 0);
-
- return ret_stuff.status;
-}
-
-/*
- * Checks for console input.
- */
-static inline u64
-ia64_sn_console_check(int *result)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0);
-
- /* result is in 'v0' */
- *result = (int)ret_stuff.v0;
-
- return ret_stuff.status;
-}
-
-/*
- * Checks console interrupt status
- */
-static inline u64
-ia64_sn_console_intr_status(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR,
- 0, SAL_CONSOLE_INTR_STATUS,
- 0, 0, 0, 0, 0);
-
- if (ret_stuff.status == 0) {
- return ret_stuff.v0;
- }
-
- return 0;
-}
-
-/*
- * Enable an interrupt on the SAL console device.
- */
-static inline void
-ia64_sn_console_intr_enable(u64 intr)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR,
- intr, SAL_CONSOLE_INTR_ON,
- 0, 0, 0, 0, 0);
-}
-
-/*
- * Disable an interrupt on the SAL console device.
- */
-static inline void
-ia64_sn_console_intr_disable(u64 intr)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR,
- intr, SAL_CONSOLE_INTR_OFF,
- 0, 0, 0, 0, 0);
-}
-
-/*
- * Sends a character buffer to the console asynchronously.
- */
-static inline u64
-ia64_sn_console_xmit_chars(char *buf, int len)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
- (u64)buf, (u64)len,
- 0, 0, 0, 0, 0);
-
- if (ret_stuff.status == 0) {
- return ret_stuff.v0;
- }
-
- return 0;
-}
-
-/*
- * Returns the iobrick module Id
- */
-static inline u64
-ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0);
-
- /* result is in 'v0' */
- *result = (int)ret_stuff.v0;
-
- return ret_stuff.status;
-}
-
-/**
- * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function
- *
- * SN_SAL_POD_MODE actually takes an argument, but it's always
- * 0 when we call it from the kernel, so we don't have to expose
- * it to the caller.
- */
-static inline u64
-ia64_sn_pod_mode(void)
-{
- struct ia64_sal_retval isrv;
- SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
- if (isrv.status)
- return 0;
- return isrv.v0;
-}
-
-/**
- * ia64_sn_probe_mem - read from memory safely
- * @addr: address to probe
- * @size: number bytes to read (1,2,4,8)
- * @data_ptr: address to store value read by probe (-1 returned if probe fails)
- *
- * Call into the SAL to do a memory read. If the read generates a machine
- * check, this routine will recover gracefully and return -1 to the caller.
- * @addr is usually a kernel virtual address in uncached space (i.e. the
- * address starts with 0xc), but if called in physical mode, @addr should
- * be a physical address.
- *
- * Return values:
- * 0 - probe successful
- * 1 - probe failed (generated MCA)
- * 2 - Bad arg
- * <0 - PAL error
- */
-static inline u64
-ia64_sn_probe_mem(long addr, long size, void *data_ptr)
-{
- struct ia64_sal_retval isrv;
-
- SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0);
-
- if (data_ptr) {
- switch (size) {
- case 1:
- *((u8*)data_ptr) = (u8)isrv.v0;
- break;
- case 2:
- *((u16*)data_ptr) = (u16)isrv.v0;
- break;
- case 4:
- *((u32*)data_ptr) = (u32)isrv.v0;
- break;
- case 8:
- *((u64*)data_ptr) = (u64)isrv.v0;
- break;
- default:
- isrv.status = 2;
- }
- }
- return isrv.status;
-}
-
-/*
- * Retrieve the system serial number as an ASCII string.
- */
-static inline u64
-ia64_sn_sys_serial_get(char *buf)
-{
- struct ia64_sal_retval ret_stuff;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
-extern char sn_system_serial_number_string[];
-extern u64 sn_partition_serial_number;
-
-static inline char *
-sn_system_serial_number(void) {
- if (sn_system_serial_number_string[0]) {
- return(sn_system_serial_number_string);
- } else {
- ia64_sn_sys_serial_get(sn_system_serial_number_string);
- return(sn_system_serial_number_string);
- }
-}
-
-
-/*
- * Returns a unique id number for this system and partition (suitable for
- * use with license managers), based in part on the system serial number.
- */
-static inline u64
-ia64_sn_partition_serial_get(void)
-{
- struct ia64_sal_retval ret_stuff;
- ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0,
- 0, 0, 0, 0, 0, 0);
- if (ret_stuff.status != 0)
- return 0;
- return ret_stuff.v0;
-}
-
-static inline u64
-sn_partition_serial_number_val(void) {
- if (unlikely(sn_partition_serial_number == 0)) {
- sn_partition_serial_number = ia64_sn_partition_serial_get();
- }
- return sn_partition_serial_number;
-}
-
-/*
- * Returns the partition id of the nasid passed in as an argument,
- * or INVALID_PARTID if the partition id cannot be retrieved.
- */
-static inline partid_t
-ia64_sn_sysctl_partition_get(nasid_t nasid)
-{
- struct ia64_sal_retval ret_stuff;
- SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid,
- 0, 0, 0, 0, 0, 0);
- if (ret_stuff.status != 0)
- return -1;
- return ((partid_t)ret_stuff.v0);
-}
-
/*
* Returns the physical address of the partition's reserved page through
* an iterative number of calls.
@@ -634,96 +61,6 @@ sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)
}
/*
- * Register or unregister a physical address range being referenced across
- * a partition boundary for which certain SAL errors should be scanned for,
- * cleaned up and ignored. This is of value for kernel partitioning code only.
- * Values for the operation argument:
- * 1 = register this address range with SAL
- * 0 = unregister this address range with SAL
- *
- * SAL maintains a reference count on an address range in case it is registered
- * multiple times.
- *
- * On success, returns the reference count of the address range after the SAL
- * call has performed the current registration/unregistration. Returns a
- * negative value if an error occurred.
- */
-static inline int
-sn_register_xp_addr_region(u64 paddr, u64 len, int operation)
-{
- struct ia64_sal_retval ret_stuff;
- ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len,
- (u64)operation, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
-/*
- * Register or unregister an instruction range for which SAL errors should
- * be ignored. If an error occurs while in the registered range, SAL jumps
- * to return_addr after ignoring the error. Values for the operation argument:
- * 1 = register this instruction range with SAL
- * 0 = unregister this instruction range with SAL
- *
- * Returns 0 on success, or a negative value if an error occurred.
- */
-static inline int
-sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr,
- int virtual, int operation)
-{
- struct ia64_sal_retval ret_stuff;
- u64 call;
- if (virtual) {
- call = SN_SAL_NO_FAULT_ZONE_VIRTUAL;
- } else {
- call = SN_SAL_NO_FAULT_ZONE_PHYSICAL;
- }
- ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr,
- (u64)1, 0, 0, 0);
- return ret_stuff.status;
-}
-
-/*
- * Register or unregister a function to handle a PMI received by a CPU.
- * Before calling the registered handler, SAL sets r1 to the value that
- * was passed in as the global_pointer.
- *
- * If the handler pointer is NULL, then the currently registered handler
- * will be unregistered.
- *
- * Returns 0 on success, or a negative value if an error occurred.
- */
-static inline int
-sn_register_pmi_handler(u64 handler, u64 global_pointer)
-{
- struct ia64_sal_retval ret_stuff;
- ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler,
- global_pointer, 0, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
-/*
- * Change or query the coherence domain for this partition. Each cpu-based
- * nasid is represented by a bit in an array of 64-bit words:
- * 0 = not in this partition's coherency domain
- * 1 = in this partition's coherency domain
- *
- * It is not possible for the local system's nasids to be removed from
- * the coherency domain. Purpose of the domain arguments:
- * new_domain = set the coherence domain to the given nasids
- * old_domain = return the current coherence domain
- *
- * Returns 0 on success, or a negative value if an error occurred.
- */
-static inline int
-sn_change_coherence(u64 *new_domain, u64 *old_domain)
-{
- struct ia64_sal_retval ret_stuff;
- ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain,
- (u64)old_domain, 0, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
-/*
* Change memory access protections for a physical address range.
* nasid_array is not used on Altix, but may be in future architectures.
* Available memory protection access classes are defined after the function.
@@ -744,395 +81,6 @@ sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
#define SN_MEMPROT_ACCESS_CLASS_6 0x084080
#define SN_MEMPROT_ACCESS_CLASS_7 0x021080
-/*
- * Turns off system power.
- */
-static inline void
-ia64_sn_power_down(void)
-{
- struct ia64_sal_retval ret_stuff;
- SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
- while(1)
- cpu_relax();
- /* never returns */
-}
-
-/**
- * ia64_sn_fru_capture - tell the system controller to capture hw state
- *
- * This routine will call the SAL which will tell the system controller(s)
- * to capture hw mmr information from each SHub in the system.
- */
-static inline u64
-ia64_sn_fru_capture(void)
-{
- struct ia64_sal_retval isrv;
- SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0);
- if (isrv.status)
- return 0;
- return isrv.v0;
-}
-
-/*
- * Performs an operation on a PCI bus or slot -- power up, power down
- * or reset.
- */
-static inline u64
-ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type,
- u64 bus, char slot,
- u64 action)
-{
- struct ia64_sal_retval rv = {0, 0, 0, 0};
-
- SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action,
- bus, (u64) slot, 0, 0);
- if (rv.status)
- return rv.v0;
- return 0;
-}
-
-
-/*
- * Open a subchannel for sending arbitrary data to the system
- * controller network via the system controller device associated with
- * 'nasid'. Return the subchannel number or a negative error code.
- */
-static inline int
-ia64_sn_irtr_open(nasid_t nasid)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
- 0, 0, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Close system controller subchannel 'subch' previously opened on 'nasid'.
- */
-static inline int
-ia64_sn_irtr_close(nasid_t nasid, int subch)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
- (u64) nasid, (u64) subch, 0, 0, 0, 0);
- return (int) rv.status;
-}
-
-/*
- * Read data from system controller associated with 'nasid' on
- * subchannel 'subch'. The buffer to be filled is pointed to by
- * 'buf', and its capacity is in the integer pointed to by 'len'. The
- * referent of 'len' is set to the number of bytes read by the SAL
- * call. The return value is either SALRET_OK (for bytes read) or
- * SALRET_ERROR (for error or "no data available").
- */
-static inline int
-ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
- (u64) nasid, (u64) subch, (u64) buf, (u64) len,
- 0, 0);
- return (int) rv.status;
-}
-
-/*
- * Write data to the system controller network via the system
- * controller associated with 'nasid' on suchannel 'subch'. The
- * buffer to be written out is pointed to by 'buf', and 'len' is the
- * number of bytes to be written. The return value is either the
- * number of bytes written (which could be zero) or a negative error
- * code.
- */
-static inline int
-ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
- (u64) nasid, (u64) subch, (u64) buf, (u64) len,
- 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Check whether any interrupts are pending for the system controller
- * associated with 'nasid' and its subchannel 'subch'. The return
- * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
- * SAL_IROUTER_INTR_RECV).
- */
-static inline int
-ia64_sn_irtr_intr(nasid_t nasid, int subch)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
- (u64) nasid, (u64) subch, 0, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Enable the interrupt indicated by the intr parameter (either
- * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
- */
-static inline int
-ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
- (u64) nasid, (u64) subch, intr, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Disable the interrupt indicated by the intr parameter (either
- * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
- */
-static inline int
-ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
- (u64) nasid, (u64) subch, intr, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Set up a node as the point of contact for system controller
- * environmental event delivery.
- */
-static inline int
-ia64_sn_sysctl_event_init(nasid_t nasid)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid,
- 0, 0, 0, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Ask the system controller on the specified nasid to reset
- * the CX corelet clock. Only valid on TIO nodes.
- */
-static inline int
-ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
- nasid, 0, 0, 0, 0, 0);
- if (rv.status != 0)
- return (int)rv.status;
- if (rv.v0 != 0)
- return (int)rv.v0;
-
- return 0;
-}
-
-/*
- * Get the associated ioboard type for a given nasid.
- */
-static inline long
-ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard)
-{
- struct ia64_sal_retval isrv;
- SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
- nasid, 0, 0, 0, 0, 0);
- if (isrv.v0 != 0) {
- *ioboard = isrv.v0;
- return isrv.status;
- }
- if (isrv.v1 != 0) {
- *ioboard = isrv.v1;
- return isrv.status;
- }
-
- return isrv.status;
-}
-
-/**
- * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
- * @nasid: NASID of node to read
- * @index: FIT entry index to be retrieved (0..n)
- * @fitentry: 16 byte buffer where FIT entry will be stored.
- * @banbuf: optional buffer for retrieving banner
- * @banlen: length of banner buffer
- *
- * Access to the physical PROM chips needs to be serialized since reads and
- * writes can't occur at the same time, so we need to call into the SAL when
- * we want to look at the FIT entries on the chips.
- *
- * Returns:
- * %SALRET_OK if ok
- * %SALRET_INVALID_ARG if index too big
- * %SALRET_NOT_IMPLEMENTED if running on older PROM
- * ??? if nasid invalid OR banner buffer not large enough
- */
-static inline int
-ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
- u64 banlen)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
- banbuf, banlen, 0, 0);
- return (int) rv.status;
-}
-
-/*
- * Initialize the SAL components of the system controller
- * communication driver; specifically pass in a sizable buffer that
- * can be used for allocation of subchannel queues as new subchannels
- * are opened. "buf" points to the buffer, and "len" specifies its
- * length.
- */
-static inline int
-ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
- (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
- return (int) rv.status;
-}
-
-/*
- * Returns the nasid, subnode & slice corresponding to a SAPIC ID
- *
- * In:
- * arg0 - SN_SAL_GET_SAPIC_INFO
- * arg1 - sapicid (lid >> 16)
- * Out:
- * v0 - nasid
- * v1 - subnode
- * v2 - slice
- */
-static inline u64
-ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);
-
-/***** BEGIN HACK - temp til old proms no longer supported ********/
- if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
- if (nasid) *nasid = sapicid & 0xfff;
- if (subnode) *subnode = (sapicid >> 13) & 1;
- if (slice) *slice = (sapicid >> 12) & 3;
- return 0;
- }
-/***** END HACK *******/
-
- if (ret_stuff.status < 0)
- return ret_stuff.status;
-
- if (nasid) *nasid = (int) ret_stuff.v0;
- if (subnode) *subnode = (int) ret_stuff.v1;
- if (slice) *slice = (int) ret_stuff.v2;
- return 0;
-}
-
-/*
- * Returns information about the HUB/SHUB.
- * In:
- * arg0 - SN_SAL_GET_SN_INFO
- * arg1 - 0 (other values reserved for future use)
- * Out:
- * v0
- * [7:0] - shub type (0=shub1, 1=shub2)
- * [15:8] - Log2 max number of nodes in entire system (includes
- * C-bricks, I-bricks, etc)
- * [23:16] - Log2 of nodes per sharing domain
- * [31:24] - partition ID
- * [39:32] - coherency_id
- * [47:40] - regionsize
- * v1
- * [15:0] - nasid mask (ex., 0x7ff for 11 bit nasid)
- * [23:15] - bit position of low nasid bit
- */
-static inline u64
-ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift,
- u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);
-
-/***** BEGIN HACK - temp til old proms no longer supported ********/
- if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
- int nasid = get_sapicid() & 0xfff;
-#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL
-#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48
- if (shubtype) *shubtype = 0;
- if (nasid_bitmask) *nasid_bitmask = 0x7ff;
- if (nasid_shift) *nasid_shift = 38;
- if (systemsize) *systemsize = 10;
- if (sharing_domain_size) *sharing_domain_size = 8;
- if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
- if (coher) *coher = nasid >> 9;
- if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
- SH_SHUB_ID_NODES_PER_BIT_SHFT;
- return 0;
- }
-/***** END HACK *******/
-
- if (ret_stuff.status < 0)
- return ret_stuff.status;
-
- if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
- if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
- if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
- if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
- if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
- if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
- if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
- if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
- return 0;
-}
-
-/*
- * This is the access point to the Altix PROM hardware performance
- * and status monitoring interface. For info on using this, see
- * arch/ia64/include/asm/sn/sn2/sn_hwperf.h
- */
-static inline int
-ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
- u64 a3, u64 a4, int *v0)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
- opcode, a0, a1, a2, a3, a4);
- if (v0)
- *v0 = (int) rv.v0;
- return (int) rv.status;
-}
-
-static inline int
-ia64_sn_ioif_get_pci_topology(u64 buf, u64 len)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0);
- return (int) rv.status;
-}
-
-/*
- * BTE error recovery is implemented in SAL
- */
-static inline int
-ia64_sn_bte_recovery(nasid_t nasid)
-{
- struct ia64_sal_retval rv;
-
- rv.status = 0;
- SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0);
- if (rv.status == SALRET_NOT_IMPLEMENTED)
- return 0;
- return (int) rv.status;
-}
-
static inline int
ia64_sn_is_fake_prom(void)
{
@@ -1141,53 +89,6 @@ ia64_sn_is_fake_prom(void)
return (rv.status == 0);
}
-static inline int
-ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set)
-{
- struct ia64_sal_retval rv;
-
- SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0);
- if (rv.status != 0)
- return rv.status;
- *feature_set = rv.v0;
- return 0;
-}
-
-static inline int
-ia64_sn_set_os_feature(int feature)
-{
- struct ia64_sal_retval rv;
-
- SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0);
- return rv.status;
-}
-
-static inline int
-sn_inject_error(u64 paddr, u64 *data, u64 *ecc)
-{
- struct ia64_sal_retval ret_stuff;
-
- ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data,
- (u64)ecc, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
-static inline int
-ia64_sn_set_cpu_number(int cpu)
-{
- struct ia64_sal_retval rv;
-
- SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0);
- return rv.status;
-}
-static inline int
-ia64_sn_kernel_launch_event(void)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0);
- return rv.status;
-}
-
union sn_watchlist_u {
u64 val;
struct {
diff --git a/arch/ia64/include/asm/sn/tioca.h b/arch/ia64/include/asm/sn/tioca.h
deleted file mode 100644
index 666222d7f0f6..000000000000
--- a/arch/ia64/include/asm/sn/tioca.h
+++ /dev/null
@@ -1,596 +0,0 @@
-#ifndef _ASM_IA64_SN_TIO_TIOCA_H
-#define _ASM_IA64_SN_TIO_TIOCA_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-
-#define TIOCA_PART_NUM 0xE020
-#define TIOCA_MFGR_NUM 0x24
-#define TIOCA_REV_A 0x1
-
-/*
- * Register layout for TIO:CA. See below for bitmasks for each register.
- */
-
-struct tioca {
- u64 ca_id; /* 0x000000 */
- u64 ca_control1; /* 0x000008 */
- u64 ca_control2; /* 0x000010 */
- u64 ca_status1; /* 0x000018 */
- u64 ca_status2; /* 0x000020 */
- u64 ca_gart_aperature; /* 0x000028 */
- u64 ca_gfx_detach; /* 0x000030 */
- u64 ca_inta_dest_addr; /* 0x000038 */
- u64 ca_intb_dest_addr; /* 0x000040 */
- u64 ca_err_int_dest_addr; /* 0x000048 */
- u64 ca_int_status; /* 0x000050 */
- u64 ca_int_status_alias; /* 0x000058 */
- u64 ca_mult_error; /* 0x000060 */
- u64 ca_mult_error_alias; /* 0x000068 */
- u64 ca_first_error; /* 0x000070 */
- u64 ca_int_mask; /* 0x000078 */
- u64 ca_crm_pkterr_type; /* 0x000080 */
- u64 ca_crm_pkterr_type_alias; /* 0x000088 */
- u64 ca_crm_ct_error_detail_1; /* 0x000090 */
- u64 ca_crm_ct_error_detail_2; /* 0x000098 */
- u64 ca_crm_tnumto; /* 0x0000A0 */
- u64 ca_gart_err; /* 0x0000A8 */
- u64 ca_pcierr_type; /* 0x0000B0 */
- u64 ca_pcierr_addr; /* 0x0000B8 */
-
- u64 ca_pad_0000C0[3]; /* 0x0000{C0..D0} */
-
- u64 ca_pci_rd_buf_flush; /* 0x0000D8 */
- u64 ca_pci_dma_addr_extn; /* 0x0000E0 */
- u64 ca_agp_dma_addr_extn; /* 0x0000E8 */
- u64 ca_force_inta; /* 0x0000F0 */
- u64 ca_force_intb; /* 0x0000F8 */
- u64 ca_debug_vector_sel; /* 0x000100 */
- u64 ca_debug_mux_core_sel; /* 0x000108 */
- u64 ca_debug_mux_pci_sel; /* 0x000110 */
- u64 ca_debug_domain_sel; /* 0x000118 */
-
- u64 ca_pad_000120[28]; /* 0x0001{20..F8} */
-
- u64 ca_gart_ptr_table; /* 0x200 */
- u64 ca_gart_tlb_addr[8]; /* 0x2{08..40} */
-};
-
-/*
- * Mask/shift definitions for TIO:CA registers. The convention here is
- * to mainly use the names as they appear in the "TIO AEGIS Programmers'
- * Reference" with a CA_ prefix added. Some exceptions were made to fix
- * duplicate field names or to generalize fields that are common to
- * different registers (ca_debug_mux_core_sel and ca_debug_mux_pci_sel for
- * example).
- *
- * Fields consisting of a single bit have a single #define have a single
- * macro declaration to mask the bit. Fields consisting of multiple bits
- * have two declarations: one to mask the proper bits in a register, and
- * a second with the suffix "_SHFT" to identify how far the mask needs to
- * be shifted right to get its base value.
- */
-
-/* ==== ca_control1 */
-#define CA_SYS_BIG_END (1ull << 0)
-#define CA_DMA_AGP_SWAP (1ull << 1)
-#define CA_DMA_PCI_SWAP (1ull << 2)
-#define CA_PIO_IO_SWAP (1ull << 3)
-#define CA_PIO_MEM_SWAP (1ull << 4)
-#define CA_GFX_WR_SWAP (1ull << 5)
-#define CA_AGP_FW_ENABLE (1ull << 6)
-#define CA_AGP_CAL_CYCLE (0x7ull << 7)
-#define CA_AGP_CAL_CYCLE_SHFT 7
-#define CA_AGP_CAL_PRSCL_BYP (1ull << 10)
-#define CA_AGP_INIT_CAL_ENB (1ull << 11)
-#define CA_INJ_ADDR_PERR (1ull << 12)
-#define CA_INJ_DATA_PERR (1ull << 13)
- /* bits 15:14 unused */
-#define CA_PCIM_IO_NBE_AD (0x7ull << 16)
-#define CA_PCIM_IO_NBE_AD_SHFT 16
-#define CA_PCIM_FAST_BTB_ENB (1ull << 19)
- /* bits 23:20 unused */
-#define CA_PIO_ADDR_OFFSET (0xffull << 24)
-#define CA_PIO_ADDR_OFFSET_SHFT 24
- /* bits 35:32 unused */
-#define CA_AGPDMA_OP_COMBDELAY (0x1full << 36)
-#define CA_AGPDMA_OP_COMBDELAY_SHFT 36
- /* bit 41 unused */
-#define CA_AGPDMA_OP_ENB_COMBDELAY (1ull << 42)
-#define CA_PCI_INT_LPCNT (0xffull << 44)
-#define CA_PCI_INT_LPCNT_SHFT 44
- /* bits 63:52 unused */
-
-/* ==== ca_control2 */
-#define CA_AGP_LATENCY_TO (0xffull << 0)
-#define CA_AGP_LATENCY_TO_SHFT 0
-#define CA_PCI_LATENCY_TO (0xffull << 8)
-#define CA_PCI_LATENCY_TO_SHFT 8
-#define CA_PCI_MAX_RETRY (0x3ffull << 16)
-#define CA_PCI_MAX_RETRY_SHFT 16
- /* bits 27:26 unused */
-#define CA_RT_INT_EN (0x3ull << 28)
-#define CA_RT_INT_EN_SHFT 28
-#define CA_MSI_INT_ENB (1ull << 30)
-#define CA_PCI_ARB_ERR_ENB (1ull << 31)
-#define CA_GART_MEM_PARAM (0x3ull << 32)
-#define CA_GART_MEM_PARAM_SHFT 32
-#define CA_GART_RD_PREFETCH_ENB (1ull << 34)
-#define CA_GART_WR_PREFETCH_ENB (1ull << 35)
-#define CA_GART_FLUSH_TLB (1ull << 36)
- /* bits 39:37 unused */
-#define CA_CRM_TNUMTO_PERIOD (0x1fffull << 40)
-#define CA_CRM_TNUMTO_PERIOD_SHFT 40
- /* bits 55:53 unused */
-#define CA_CRM_TNUMTO_ENB (1ull << 56)
-#define CA_CRM_PRESCALER_BYP (1ull << 57)
- /* bits 59:58 unused */
-#define CA_CRM_MAX_CREDIT (0x7ull << 60)
-#define CA_CRM_MAX_CREDIT_SHFT 60
- /* bit 63 unused */
-
-/* ==== ca_status1 */
-#define CA_CORELET_ID (0x3ull << 0)
-#define CA_CORELET_ID_SHFT 0
-#define CA_INTA_N (1ull << 2)
-#define CA_INTB_N (1ull << 3)
-#define CA_CRM_CREDIT_AVAIL (0x7ull << 4)
-#define CA_CRM_CREDIT_AVAIL_SHFT 4
- /* bit 7 unused */
-#define CA_CRM_SPACE_AVAIL (0x7full << 8)
-#define CA_CRM_SPACE_AVAIL_SHFT 8
- /* bit 15 unused */
-#define CA_GART_TLB_VAL (0xffull << 16)
-#define CA_GART_TLB_VAL_SHFT 16
- /* bits 63:24 unused */
-
-/* ==== ca_status2 */
-#define CA_GFX_CREDIT_AVAIL (0xffull << 0)
-#define CA_GFX_CREDIT_AVAIL_SHFT 0
-#define CA_GFX_OPQ_AVAIL (0xffull << 8)
-#define CA_GFX_OPQ_AVAIL_SHFT 8
-#define CA_GFX_WRBUFF_AVAIL (0xffull << 16)
-#define CA_GFX_WRBUFF_AVAIL_SHFT 16
-#define CA_ADMA_OPQ_AVAIL (0xffull << 24)
-#define CA_ADMA_OPQ_AVAIL_SHFT 24
-#define CA_ADMA_WRBUFF_AVAIL (0xffull << 32)
-#define CA_ADMA_WRBUFF_AVAIL_SHFT 32
-#define CA_ADMA_RDBUFF_AVAIL (0x7full << 40)
-#define CA_ADMA_RDBUFF_AVAIL_SHFT 40
-#define CA_PCI_PIO_OP_STAT (1ull << 47)
-#define CA_PDMA_OPQ_AVAIL (0xfull << 48)
-#define CA_PDMA_OPQ_AVAIL_SHFT 48
-#define CA_PDMA_WRBUFF_AVAIL (0xfull << 52)
-#define CA_PDMA_WRBUFF_AVAIL_SHFT 52
-#define CA_PDMA_RDBUFF_AVAIL (0x3ull << 56)
-#define CA_PDMA_RDBUFF_AVAIL_SHFT 56
- /* bits 63:58 unused */
-
-/* ==== ca_gart_aperature */
-#define CA_GART_AP_ENB_AGP (1ull << 0)
-#define CA_GART_PAGE_SIZE (1ull << 1)
-#define CA_GART_AP_ENB_PCI (1ull << 2)
- /* bits 11:3 unused */
-#define CA_GART_AP_SIZE (0x3ffull << 12)
-#define CA_GART_AP_SIZE_SHFT 12
-#define CA_GART_AP_BASE (0x3ffffffffffull << 22)
-#define CA_GART_AP_BASE_SHFT 22
-
-/* ==== ca_inta_dest_addr
- ==== ca_intb_dest_addr
- ==== ca_err_int_dest_addr */
- /* bits 2:0 unused */
-#define CA_INT_DEST_ADDR (0x7ffffffffffffull << 3)
-#define CA_INT_DEST_ADDR_SHFT 3
- /* bits 55:54 unused */
-#define CA_INT_DEST_VECT (0xffull << 56)
-#define CA_INT_DEST_VECT_SHFT 56
-
-/* ==== ca_int_status */
-/* ==== ca_int_status_alias */
-/* ==== ca_mult_error */
-/* ==== ca_mult_error_alias */
-/* ==== ca_first_error */
-/* ==== ca_int_mask */
-#define CA_PCI_ERR (1ull << 0)
- /* bits 3:1 unused */
-#define CA_GART_FETCH_ERR (1ull << 4)
-#define CA_GFX_WR_OVFLW (1ull << 5)
-#define CA_PIO_REQ_OVFLW (1ull << 6)
-#define CA_CRM_PKTERR (1ull << 7)
-#define CA_CRM_DVERR (1ull << 8)
-#define CA_TNUMTO (1ull << 9)
-#define CA_CXM_RSP_CRED_OVFLW (1ull << 10)
-#define CA_CXM_REQ_CRED_OVFLW (1ull << 11)
-#define CA_PIO_INVALID_ADDR (1ull << 12)
-#define CA_PCI_ARB_TO (1ull << 13)
-#define CA_AGP_REQ_OFLOW (1ull << 14)
-#define CA_SBA_TYPE1_ERR (1ull << 15)
- /* bit 16 unused */
-#define CA_INTA (1ull << 17)
-#define CA_INTB (1ull << 18)
-#define CA_MULT_INTA (1ull << 19)
-#define CA_MULT_INTB (1ull << 20)
-#define CA_GFX_CREDIT_OVFLW (1ull << 21)
- /* bits 63:22 unused */
-
-/* ==== ca_crm_pkterr_type */
-/* ==== ca_crm_pkterr_type_alias */
-#define CA_CRM_PKTERR_SBERR_HDR (1ull << 0)
-#define CA_CRM_PKTERR_DIDN (1ull << 1)
-#define CA_CRM_PKTERR_PACTYPE (1ull << 2)
-#define CA_CRM_PKTERR_INV_TNUM (1ull << 3)
-#define CA_CRM_PKTERR_ADDR_RNG (1ull << 4)
-#define CA_CRM_PKTERR_ADDR_ALGN (1ull << 5)
-#define CA_CRM_PKTERR_HDR_PARAM (1ull << 6)
-#define CA_CRM_PKTERR_CW_ERR (1ull << 7)
-#define CA_CRM_PKTERR_SBERR_NH (1ull << 8)
-#define CA_CRM_PKTERR_EARLY_TERM (1ull << 9)
-#define CA_CRM_PKTERR_EARLY_TAIL (1ull << 10)
-#define CA_CRM_PKTERR_MSSNG_TAIL (1ull << 11)
-#define CA_CRM_PKTERR_MSSNG_HDR (1ull << 12)
- /* bits 15:13 unused */
-#define CA_FIRST_CRM_PKTERR_SBERR_HDR (1ull << 16)
-#define CA_FIRST_CRM_PKTERR_DIDN (1ull << 17)
-#define CA_FIRST_CRM_PKTERR_PACTYPE (1ull << 18)
-#define CA_FIRST_CRM_PKTERR_INV_TNUM (1ull << 19)
-#define CA_FIRST_CRM_PKTERR_ADDR_RNG (1ull << 20)
-#define CA_FIRST_CRM_PKTERR_ADDR_ALGN (1ull << 21)
-#define CA_FIRST_CRM_PKTERR_HDR_PARAM (1ull << 22)
-#define CA_FIRST_CRM_PKTERR_CW_ERR (1ull << 23)
-#define CA_FIRST_CRM_PKTERR_SBERR_NH (1ull << 24)
-#define CA_FIRST_CRM_PKTERR_EARLY_TERM (1ull << 25)
-#define CA_FIRST_CRM_PKTERR_EARLY_TAIL (1ull << 26)
-#define CA_FIRST_CRM_PKTERR_MSSNG_TAIL (1ull << 27)
-#define CA_FIRST_CRM_PKTERR_MSSNG_HDR (1ull << 28)
- /* bits 63:29 unused */
-
-/* ==== ca_crm_ct_error_detail_1 */
-#define CA_PKT_TYPE (0xfull << 0)
-#define CA_PKT_TYPE_SHFT 0
-#define CA_SRC_ID (0x3ull << 4)
-#define CA_SRC_ID_SHFT 4
-#define CA_DATA_SZ (0x3ull << 6)
-#define CA_DATA_SZ_SHFT 6
-#define CA_TNUM (0xffull << 8)
-#define CA_TNUM_SHFT 8
-#define CA_DW_DATA_EN (0xffull << 16)
-#define CA_DW_DATA_EN_SHFT 16
-#define CA_GFX_CRED (0xffull << 24)
-#define CA_GFX_CRED_SHFT 24
-#define CA_MEM_RD_PARAM (0x3ull << 32)
-#define CA_MEM_RD_PARAM_SHFT 32
-#define CA_PIO_OP (1ull << 34)
-#define CA_CW_ERR (1ull << 35)
- /* bits 62:36 unused */
-#define CA_VALID (1ull << 63)
-
-/* ==== ca_crm_ct_error_detail_2 */
- /* bits 2:0 unused */
-#define CA_PKT_ADDR (0x1fffffffffffffull << 3)
-#define CA_PKT_ADDR_SHFT 3
- /* bits 63:56 unused */
-
-/* ==== ca_crm_tnumto */
-#define CA_CRM_TNUMTO_VAL (0xffull << 0)
-#define CA_CRM_TNUMTO_VAL_SHFT 0
-#define CA_CRM_TNUMTO_WR (1ull << 8)
- /* bits 63:9 unused */
-
-/* ==== ca_gart_err */
-#define CA_GART_ERR_SOURCE (0x3ull << 0)
-#define CA_GART_ERR_SOURCE_SHFT 0
- /* bits 3:2 unused */
-#define CA_GART_ERR_ADDR (0xfffffffffull << 4)
-#define CA_GART_ERR_ADDR_SHFT 4
- /* bits 63:40 unused */
-
-/* ==== ca_pcierr_type */
-#define CA_PCIERR_DATA (0xffffffffull << 0)
-#define CA_PCIERR_DATA_SHFT 0
-#define CA_PCIERR_ENB (0xfull << 32)
-#define CA_PCIERR_ENB_SHFT 32
-#define CA_PCIERR_CMD (0xfull << 36)
-#define CA_PCIERR_CMD_SHFT 36
-#define CA_PCIERR_A64 (1ull << 40)
-#define CA_PCIERR_SLV_SERR (1ull << 41)
-#define CA_PCIERR_SLV_WR_PERR (1ull << 42)
-#define CA_PCIERR_SLV_RD_PERR (1ull << 43)
-#define CA_PCIERR_MST_SERR (1ull << 44)
-#define CA_PCIERR_MST_WR_PERR (1ull << 45)
-#define CA_PCIERR_MST_RD_PERR (1ull << 46)
-#define CA_PCIERR_MST_MABT (1ull << 47)
-#define CA_PCIERR_MST_TABT (1ull << 48)
-#define CA_PCIERR_MST_RETRY_TOUT (1ull << 49)
-
-#define CA_PCIERR_TYPES \
- (CA_PCIERR_A64|CA_PCIERR_SLV_SERR| \
- CA_PCIERR_SLV_WR_PERR|CA_PCIERR_SLV_RD_PERR| \
- CA_PCIERR_MST_SERR|CA_PCIERR_MST_WR_PERR|CA_PCIERR_MST_RD_PERR| \
- CA_PCIERR_MST_MABT|CA_PCIERR_MST_TABT|CA_PCIERR_MST_RETRY_TOUT)
-
- /* bits 63:50 unused */
-
-/* ==== ca_pci_dma_addr_extn */
-#define CA_UPPER_NODE_OFFSET (0x3full << 0)
-#define CA_UPPER_NODE_OFFSET_SHFT 0
- /* bits 7:6 unused */
-#define CA_CHIPLET_ID (0x3ull << 8)
-#define CA_CHIPLET_ID_SHFT 8
- /* bits 11:10 unused */
-#define CA_PCI_DMA_NODE_ID (0xffffull << 12)
-#define CA_PCI_DMA_NODE_ID_SHFT 12
- /* bits 27:26 unused */
-#define CA_PCI_DMA_PIO_MEM_TYPE (1ull << 28)
- /* bits 63:29 unused */
-
-
-/* ==== ca_agp_dma_addr_extn */
- /* bits 19:0 unused */
-#define CA_AGP_DMA_NODE_ID (0xffffull << 20)
-#define CA_AGP_DMA_NODE_ID_SHFT 20
- /* bits 27:26 unused */
-#define CA_AGP_DMA_PIO_MEM_TYPE (1ull << 28)
- /* bits 63:29 unused */
-
-/* ==== ca_debug_vector_sel */
-#define CA_DEBUG_MN_VSEL (0xfull << 0)
-#define CA_DEBUG_MN_VSEL_SHFT 0
-#define CA_DEBUG_PP_VSEL (0xfull << 4)
-#define CA_DEBUG_PP_VSEL_SHFT 4
-#define CA_DEBUG_GW_VSEL (0xfull << 8)
-#define CA_DEBUG_GW_VSEL_SHFT 8
-#define CA_DEBUG_GT_VSEL (0xfull << 12)
-#define CA_DEBUG_GT_VSEL_SHFT 12
-#define CA_DEBUG_PD_VSEL (0xfull << 16)
-#define CA_DEBUG_PD_VSEL_SHFT 16
-#define CA_DEBUG_AD_VSEL (0xfull << 20)
-#define CA_DEBUG_AD_VSEL_SHFT 20
-#define CA_DEBUG_CX_VSEL (0xfull << 24)
-#define CA_DEBUG_CX_VSEL_SHFT 24
-#define CA_DEBUG_CR_VSEL (0xfull << 28)
-#define CA_DEBUG_CR_VSEL_SHFT 28
-#define CA_DEBUG_BA_VSEL (0xfull << 32)
-#define CA_DEBUG_BA_VSEL_SHFT 32
-#define CA_DEBUG_PE_VSEL (0xfull << 36)
-#define CA_DEBUG_PE_VSEL_SHFT 36
-#define CA_DEBUG_BO_VSEL (0xfull << 40)
-#define CA_DEBUG_BO_VSEL_SHFT 40
-#define CA_DEBUG_BI_VSEL (0xfull << 44)
-#define CA_DEBUG_BI_VSEL_SHFT 44
-#define CA_DEBUG_AS_VSEL (0xfull << 48)
-#define CA_DEBUG_AS_VSEL_SHFT 48
-#define CA_DEBUG_PS_VSEL (0xfull << 52)
-#define CA_DEBUG_PS_VSEL_SHFT 52
-#define CA_DEBUG_PM_VSEL (0xfull << 56)
-#define CA_DEBUG_PM_VSEL_SHFT 56
- /* bits 63:60 unused */
-
-/* ==== ca_debug_mux_core_sel */
-/* ==== ca_debug_mux_pci_sel */
-#define CA_DEBUG_MSEL0 (0x7ull << 0)
-#define CA_DEBUG_MSEL0_SHFT 0
- /* bit 3 unused */
-#define CA_DEBUG_NSEL0 (0x7ull << 4)
-#define CA_DEBUG_NSEL0_SHFT 4
- /* bit 7 unused */
-#define CA_DEBUG_MSEL1 (0x7ull << 8)
-#define CA_DEBUG_MSEL1_SHFT 8
- /* bit 11 unused */
-#define CA_DEBUG_NSEL1 (0x7ull << 12)
-#define CA_DEBUG_NSEL1_SHFT 12
- /* bit 15 unused */
-#define CA_DEBUG_MSEL2 (0x7ull << 16)
-#define CA_DEBUG_MSEL2_SHFT 16
- /* bit 19 unused */
-#define CA_DEBUG_NSEL2 (0x7ull << 20)
-#define CA_DEBUG_NSEL2_SHFT 20
- /* bit 23 unused */
-#define CA_DEBUG_MSEL3 (0x7ull << 24)
-#define CA_DEBUG_MSEL3_SHFT 24
- /* bit 27 unused */
-#define CA_DEBUG_NSEL3 (0x7ull << 28)
-#define CA_DEBUG_NSEL3_SHFT 28
- /* bit 31 unused */
-#define CA_DEBUG_MSEL4 (0x7ull << 32)
-#define CA_DEBUG_MSEL4_SHFT 32
- /* bit 35 unused */
-#define CA_DEBUG_NSEL4 (0x7ull << 36)
-#define CA_DEBUG_NSEL4_SHFT 36
- /* bit 39 unused */
-#define CA_DEBUG_MSEL5 (0x7ull << 40)
-#define CA_DEBUG_MSEL5_SHFT 40
- /* bit 43 unused */
-#define CA_DEBUG_NSEL5 (0x7ull << 44)
-#define CA_DEBUG_NSEL5_SHFT 44
- /* bit 47 unused */
-#define CA_DEBUG_MSEL6 (0x7ull << 48)
-#define CA_DEBUG_MSEL6_SHFT 48
- /* bit 51 unused */
-#define CA_DEBUG_NSEL6 (0x7ull << 52)
-#define CA_DEBUG_NSEL6_SHFT 52
- /* bit 55 unused */
-#define CA_DEBUG_MSEL7 (0x7ull << 56)
-#define CA_DEBUG_MSEL7_SHFT 56
- /* bit 59 unused */
-#define CA_DEBUG_NSEL7 (0x7ull << 60)
-#define CA_DEBUG_NSEL7_SHFT 60
- /* bit 63 unused */
-
-
-/* ==== ca_debug_domain_sel */
-#define CA_DEBUG_DOMAIN_L (1ull << 0)
-#define CA_DEBUG_DOMAIN_H (1ull << 1)
- /* bits 63:2 unused */
-
-/* ==== ca_gart_ptr_table */
-#define CA_GART_PTR_VAL (1ull << 0)
- /* bits 11:1 unused */
-#define CA_GART_PTR_ADDR (0xfffffffffffull << 12)
-#define CA_GART_PTR_ADDR_SHFT 12
- /* bits 63:56 unused */
-
-/* ==== ca_gart_tlb_addr[0-7] */
-#define CA_GART_TLB_ADDR (0xffffffffffffffull << 0)
-#define CA_GART_TLB_ADDR_SHFT 0
- /* bits 62:56 unused */
-#define CA_GART_TLB_ENTRY_VAL (1ull << 63)
-
-/*
- * PIO address space ranges for TIO:CA
- */
-
-/* CA internal registers */
-#define CA_PIO_ADMIN 0x00000000
-#define CA_PIO_ADMIN_LEN 0x00010000
-
-/* GFX Write Buffer - Diagnostics */
-#define CA_PIO_GFX 0x00010000
-#define CA_PIO_GFX_LEN 0x00010000
-
-/* AGP DMA Write Buffer - Diagnostics */
-#define CA_PIO_AGP_DMAWRITE 0x00020000
-#define CA_PIO_AGP_DMAWRITE_LEN 0x00010000
-
-/* AGP DMA READ Buffer - Diagnostics */
-#define CA_PIO_AGP_DMAREAD 0x00030000
-#define CA_PIO_AGP_DMAREAD_LEN 0x00010000
-
-/* PCI Config Type 0 */
-#define CA_PIO_PCI_TYPE0_CONFIG 0x01000000
-#define CA_PIO_PCI_TYPE0_CONFIG_LEN 0x01000000
-
-/* PCI Config Type 1 */
-#define CA_PIO_PCI_TYPE1_CONFIG 0x02000000
-#define CA_PIO_PCI_TYPE1_CONFIG_LEN 0x01000000
-
-/* PCI I/O Cycles - mapped to PCI Address 0x00000000-0x04ffffff */
-#define CA_PIO_PCI_IO 0x03000000
-#define CA_PIO_PCI_IO_LEN 0x05000000
-
-/* PCI MEM Cycles - mapped to PCI with CA_PIO_ADDR_OFFSET of ca_control1 */
-/* use Fast Write if enabled and coretalk packet type is a GFX request */
-#define CA_PIO_PCI_MEM_OFFSET 0x08000000
-#define CA_PIO_PCI_MEM_OFFSET_LEN 0x08000000
-
-/* PCI MEM Cycles - mapped to PCI Address 0x00000000-0xbfffffff */
-/* use Fast Write if enabled and coretalk packet type is a GFX request */
-#define CA_PIO_PCI_MEM 0x40000000
-#define CA_PIO_PCI_MEM_LEN 0xc0000000
-
-/*
- * DMA space
- *
- * The CA aperature (ie. bus address range) mapped by the GART is segmented into
- * two parts. The lower portion of the aperature is used for mapping 32 bit
- * PCI addresses which are managed by the dma interfaces in this file. The
- * upper poprtion of the aperature is used for mapping 48 bit AGP addresses.
- * The AGP portion of the aperature is managed by the agpgart_be.c driver
- * in drivers/linux/agp. There are ca-specific hooks in that driver to
- * manipulate the gart, but management of the AGP portion of the aperature
- * is the responsibility of that driver.
- *
- * CA allows three main types of DMA mapping:
- *
- * PCI 64-bit Managed by this driver
- * PCI 32-bit Managed by this driver
- * AGP 48-bit Managed by hooks in the /dev/agpgart driver
- *
- * All of the above can optionally be remapped through the GART. The following
- * table lists the combinations of addressing types and GART remapping that
- * is currently supported by the driver (h/w supports all, s/w limits this):
- *
- * PCI64 PCI32 AGP48
- * GART no yes yes
- * Direct yes yes no
- *
- * GART remapping of PCI64 is not done because there is no need to. The
- * 64 bit PCI address holds all of the information necessary to target any
- * memory in the system.
- *
- * AGP48 is always mapped through the GART. Management of the AGP48 portion
- * of the aperature is the responsibility of code in the agpgart_be driver.
- *
- * The non-64 bit bus address space will currently be partitioned like this:
- *
- * 0xffff_ffff_ffff +--------
- * | AGP48 direct
- * | Space managed by this driver
- * CA_AGP_DIRECT_BASE +--------
- * | AGP GART mapped (gfx aperature)
- * | Space managed by /dev/agpgart driver
- * | This range is exposed to the agpgart
- * | driver as the "graphics aperature"
- * CA_AGP_MAPPED_BASE +-----
- * | PCI GART mapped
- * | Space managed by this driver
- * CA_PCI32_MAPPED_BASE +----
- * | PCI32 direct
- * | Space managed by this driver
- * 0xC000_0000 +--------
- * (CA_PCI32_DIRECT_BASE)
- *
- * The bus address range CA_PCI32_MAPPED_BASE through CA_AGP_DIRECT_BASE
- * is what we call the CA aperature. Addresses falling in this range will
- * be remapped using the GART.
- *
- * The bus address range CA_AGP_MAPPED_BASE through CA_AGP_DIRECT_BASE
- * is what we call the graphics aperature. This is a subset of the CA
- * aperature and is under the control of the agpgart_be driver.
- *
- * CA_PCI32_MAPPED_BASE, CA_AGP_MAPPED_BASE, and CA_AGP_DIRECT_BASE are
- * somewhat arbitrary values. The known constraints on choosing these is:
- *
- * 1) CA_AGP_DIRECT_BASE-CA_PCI32_MAPPED_BASE+1 (the CA aperature size)
- * must be one of the values supported by the ca_gart_aperature register.
- * Currently valid values are: 4MB through 4096MB in powers of 2 increments
- *
- * 2) CA_AGP_DIRECT_BASE-CA_AGP_MAPPED_BASE+1 (the gfx aperature size)
- * must be in MB units since that's what the agpgart driver assumes.
- */
-
-/*
- * Define Bus DMA ranges. These are configurable (see constraints above)
- * and will probably need tuning based on experience.
- */
-
-
-/*
- * 11/24/03
- * CA has an addressing glitch w.r.t. PCI direct 32 bit DMA that makes it
- * generally unusable. The problem is that for PCI direct 32
- * DMA's, all 32 bits of the bus address are used to form the lower 32 bits
- * of the coretalk address, and coretalk bits 38:32 come from a register.
- * Since only PCI bus addresses 0xC0000000-0xFFFFFFFF (1GB) are available
- * for DMA (the rest is allocated to PIO), host node addresses need to be
- * such that their lower 32 bits fall in the 0xC0000000-0xffffffff range
- * as well. So there can be no PCI32 direct DMA below 3GB!! For this
- * reason we set the CA_PCI32_DIRECT_SIZE to 0 which essentially makes
- * tioca_dma_direct32() a noop but preserves the code flow should this issue
- * be fixed in a respin.
- *
- * For now, all PCI32 DMA's must be mapped through the GART.
- */
-
-#define CA_PCI32_DIRECT_BASE 0xC0000000UL /* BASE not configurable */
-#define CA_PCI32_DIRECT_SIZE 0x00000000UL /* 0 MB */
-
-#define CA_PCI32_MAPPED_BASE 0xC0000000UL
-#define CA_PCI32_MAPPED_SIZE 0x40000000UL /* 2GB */
-
-#define CA_AGP_MAPPED_BASE 0x80000000UL
-#define CA_AGP_MAPPED_SIZE 0x40000000UL /* 2GB */
-
-#define CA_AGP_DIRECT_BASE 0x40000000UL /* 2GB */
-#define CA_AGP_DIRECT_SIZE 0x40000000UL
-
-#define CA_APERATURE_BASE (CA_AGP_MAPPED_BASE)
-#define CA_APERATURE_SIZE (CA_AGP_MAPPED_SIZE+CA_PCI32_MAPPED_SIZE)
-
-#endif /* _ASM_IA64_SN_TIO_TIOCA_H */
diff --git a/arch/ia64/include/asm/sn/tioca_provider.h b/arch/ia64/include/asm/sn/tioca_provider.h
deleted file mode 100644
index 9a820ac61be3..000000000000
--- a/arch/ia64/include/asm/sn/tioca_provider.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
-#define _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
-
-#include <asm/sn/tioca.h>
-
-/*
- * WAR enables
- * Defines for individual WARs. Each is a bitmask of applicable
- * part revision numbers. (1 << 1) == rev A, (1 << 2) == rev B,
- * (3 << 1) == (rev A or rev B), etc
- */
-
-#define TIOCA_WAR_ENABLED(pv, tioca_common) \
- ((1 << tioca_common->ca_rev) & pv)
-
- /* TIO:ICE:FRZ:Freezer loses a PIO data ucred on PIO RD RSP with CW error */
-#define PV907908 (1 << 1)
- /* ATI config space problems after BIOS execution starts */
-#define PV908234 (1 << 1)
- /* CA:AGPDMA write request data mismatch with ABC1CL merge */
-#define PV895469 (1 << 1)
- /* TIO:CA TLB invalidate of written GART entries possibly not occurring in CA*/
-#define PV910244 (1 << 1)
-
-struct tioca_dmamap{
- struct list_head cad_list; /* headed by ca_list */
-
- dma_addr_t cad_dma_addr; /* Linux dma handle */
- uint cad_gart_entry; /* start entry in ca_gart_pagemap */
- uint cad_gart_size; /* #entries for this map */
-};
-
-/*
- * Kernel only fields. Prom may look at this stuff for debugging only.
- * Access this structure through the ca_kernel_private ptr.
- */
-
-struct tioca_common ;
-
-struct tioca_kernel {
- struct tioca_common *ca_common; /* tioca this belongs to */
- struct list_head ca_list; /* list of all ca's */
- struct list_head ca_dmamaps;
- spinlock_t ca_lock; /* Kernel lock */
- cnodeid_t ca_closest_node;
- struct list_head *ca_devices; /* bus->devices */
-
- /*
- * General GART stuff
- */
- u64 ca_ap_size; /* size of aperature in bytes */
- u32 ca_gart_entries; /* # u64 entries in gart */
- u32 ca_ap_pagesize; /* aperature page size in bytes */
- u64 ca_ap_bus_base; /* bus address of CA aperature */
- u64 ca_gart_size; /* gart size in bytes */
- u64 *ca_gart; /* gart table vaddr */
- u64 ca_gart_coretalk_addr; /* gart coretalk addr */
- u8 ca_gart_iscoherent; /* used in tioca_tlbflush */
-
- /* PCI GART convenience values */
- u64 ca_pciap_base; /* pci aperature bus base address */
- u64 ca_pciap_size; /* pci aperature size (bytes) */
- u64 ca_pcigart_base; /* gfx GART bus base address */
- u64 *ca_pcigart; /* gfx GART vm address */
- u32 ca_pcigart_entries;
- u32 ca_pcigart_start; /* PCI start index in ca_gart */
- void *ca_pcigart_pagemap;
-
- /* AGP GART convenience values */
- u64 ca_gfxap_base; /* gfx aperature bus base address */
- u64 ca_gfxap_size; /* gfx aperature size (bytes) */
- u64 ca_gfxgart_base; /* gfx GART bus base address */
- u64 *ca_gfxgart; /* gfx GART vm address */
- u32 ca_gfxgart_entries;
- u32 ca_gfxgart_start; /* agpgart start index in ca_gart */
-};
-
-/*
- * Common tioca info shared between kernel and prom
- *
- * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES
- * TO THE PROM VERSION.
- */
-
-struct tioca_common {
- struct pcibus_bussoft ca_common; /* common pciio header */
-
- u32 ca_rev;
- u32 ca_closest_nasid;
-
- u64 ca_prom_private;
- u64 ca_kernel_private;
-};
-
-/**
- * tioca_paddr_to_gart - Convert an SGI coretalk address to a CA GART entry
- * @paddr: page address to convert
- *
- * Convert a system [coretalk] address to a GART entry. GART entries are
- * formed using the following:
- *
- * data = ( (1<<63) | ( (REMAP_NODE_ID << 40) | (MD_CHIPLET_ID << 38) |
- * (REMAP_SYS_ADDR) ) >> 12 )
- *
- * DATA written to 1 GART TABLE Entry in system memory is remapped system
- * addr for 1 page
- *
- * The data is for coretalk address format right shifted 12 bits with a
- * valid bit.
- *
- * GART_TABLE_ENTRY [ 25:0 ] -- REMAP_SYS_ADDRESS[37:12].
- * GART_TABLE_ENTRY [ 27:26 ] -- SHUB MD chiplet id.
- * GART_TABLE_ENTRY [ 41:28 ] -- REMAP_NODE_ID.
- * GART_TABLE_ENTRY [ 63 ] -- Valid Bit
- */
-static inline u64
-tioca_paddr_to_gart(unsigned long paddr)
-{
- /*
- * We are assuming right now that paddr already has the correct
- * format since the address from xtalk_dmaXXX should already have
- * NODE_ID, CHIPLET_ID, and SYS_ADDR in the correct locations.
- */
-
- return ((paddr) >> 12) | (1UL << 63);
-}
-
-/**
- * tioca_physpage_to_gart - Map a host physical page for SGI CA based DMA
- * @page_addr: system page address to map
- */
-
-static inline unsigned long
-tioca_physpage_to_gart(u64 page_addr)
-{
- u64 coretalk_addr;
-
- coretalk_addr = PHYS_TO_TIODMA(page_addr);
- if (!coretalk_addr) {
- return 0;
- }
-
- return tioca_paddr_to_gart(coretalk_addr);
-}
-
-/**
- * tioca_tlbflush - invalidate cached SGI CA GART TLB entries
- * @tioca_kernel: CA context
- *
- * Invalidate tlb entries for a given CA GART. Main complexity is to account
- * for revA bug.
- */
-static inline void
-tioca_tlbflush(struct tioca_kernel *tioca_kernel)
-{
- volatile u64 tmp;
- volatile struct tioca __iomem *ca_base;
- struct tioca_common *tioca_common;
-
- tioca_common = tioca_kernel->ca_common;
- ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base;
-
- /*
- * Explicit flushes not needed if GART is in cached mode
- */
- if (tioca_kernel->ca_gart_iscoherent) {
- if (TIOCA_WAR_ENABLED(PV910244, tioca_common)) {
- /*
- * PV910244: RevA CA needs explicit flushes.
- * Need to put GART into uncached mode before
- * flushing otherwise the explicit flush is ignored.
- *
- * Alternate WAR would be to leave GART cached and
- * touch every CL aligned GART entry.
- */
-
- __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
- __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
- __sn_setq_relaxed(&ca_base->ca_control2,
- (0x2ull << CA_GART_MEM_PARAM_SHFT));
- tmp = __sn_readq_relaxed(&ca_base->ca_control2);
- }
-
- return;
- }
-
- /*
- * Gart in uncached mode ... need an explicit flush.
- */
-
- __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
- tmp = __sn_readq_relaxed(&ca_base->ca_control2);
-}
-
-extern u32 tioca_gart_found;
-extern struct list_head tioca_list;
-extern int tioca_init_provider(void);
-extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern);
-#endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */
diff --git a/arch/ia64/include/asm/sn/tioce.h b/arch/ia64/include/asm/sn/tioce.h
deleted file mode 100644
index 6eae8ada90f0..000000000000
--- a/arch/ia64/include/asm/sn/tioce.h
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef __ASM_IA64_SN_TIOCE_H__
-#define __ASM_IA64_SN_TIOCE_H__
-
-/* CE ASIC part & mfgr information */
-#define TIOCE_PART_NUM 0xCE00
-#define TIOCE_SRC_ID 0x01
-#define TIOCE_REV_A 0x1
-
-/* CE Virtual PPB Vendor/Device IDs */
-#define CE_VIRT_PPB_VENDOR_ID 0x10a9
-#define CE_VIRT_PPB_DEVICE_ID 0x4002
-
-/* CE Host Bridge Vendor/Device IDs */
-#define CE_HOST_BRIDGE_VENDOR_ID 0x10a9
-#define CE_HOST_BRIDGE_DEVICE_ID 0x4001
-
-
-#define TIOCE_NUM_M40_ATES 4096
-#define TIOCE_NUM_M3240_ATES 2048
-#define TIOCE_NUM_PORTS 2
-
-/*
- * Register layout for TIOCE. MMR offsets are shown at the far right of the
- * structure definition.
- */
-typedef volatile struct tioce {
- /*
- * ADMIN : Administration Registers
- */
- u64 ce_adm_id; /* 0x000000 */
- u64 ce_pad_000008; /* 0x000008 */
- u64 ce_adm_dyn_credit_status; /* 0x000010 */
- u64 ce_adm_last_credit_status; /* 0x000018 */
- u64 ce_adm_credit_limit; /* 0x000020 */
- u64 ce_adm_force_credit; /* 0x000028 */
- u64 ce_adm_control; /* 0x000030 */
- u64 ce_adm_mmr_chn_timeout; /* 0x000038 */
- u64 ce_adm_ssp_ure_timeout; /* 0x000040 */
- u64 ce_adm_ssp_dre_timeout; /* 0x000048 */
- u64 ce_adm_ssp_debug_sel; /* 0x000050 */
- u64 ce_adm_int_status; /* 0x000058 */
- u64 ce_adm_int_status_alias; /* 0x000060 */
- u64 ce_adm_int_mask; /* 0x000068 */
- u64 ce_adm_int_pending; /* 0x000070 */
- u64 ce_adm_force_int; /* 0x000078 */
- u64 ce_adm_ure_ups_buf_barrier_flush; /* 0x000080 */
- u64 ce_adm_int_dest[15]; /* 0x000088 -- 0x0000F8 */
- u64 ce_adm_error_summary; /* 0x000100 */
- u64 ce_adm_error_summary_alias; /* 0x000108 */
- u64 ce_adm_error_mask; /* 0x000110 */
- u64 ce_adm_first_error; /* 0x000118 */
- u64 ce_adm_error_overflow; /* 0x000120 */
- u64 ce_adm_error_overflow_alias; /* 0x000128 */
- u64 ce_pad_000130[2]; /* 0x000130 -- 0x000138 */
- u64 ce_adm_tnum_error; /* 0x000140 */
- u64 ce_adm_mmr_err_detail; /* 0x000148 */
- u64 ce_adm_msg_sram_perr_detail; /* 0x000150 */
- u64 ce_adm_bap_sram_perr_detail; /* 0x000158 */
- u64 ce_adm_ce_sram_perr_detail; /* 0x000160 */
- u64 ce_adm_ce_credit_oflow_detail; /* 0x000168 */
- u64 ce_adm_tx_link_idle_max_timer; /* 0x000170 */
- u64 ce_adm_pcie_debug_sel; /* 0x000178 */
- u64 ce_pad_000180[16]; /* 0x000180 -- 0x0001F8 */
-
- u64 ce_adm_pcie_debug_sel_top; /* 0x000200 */
- u64 ce_adm_pcie_debug_lat_sel_lo_top; /* 0x000208 */
- u64 ce_adm_pcie_debug_lat_sel_hi_top; /* 0x000210 */
- u64 ce_adm_pcie_debug_trig_sel_top; /* 0x000218 */
- u64 ce_adm_pcie_debug_trig_lat_sel_lo_top; /* 0x000220 */
- u64 ce_adm_pcie_debug_trig_lat_sel_hi_top; /* 0x000228 */
- u64 ce_adm_pcie_trig_compare_top; /* 0x000230 */
- u64 ce_adm_pcie_trig_compare_en_top; /* 0x000238 */
- u64 ce_adm_ssp_debug_sel_top; /* 0x000240 */
- u64 ce_adm_ssp_debug_lat_sel_lo_top; /* 0x000248 */
- u64 ce_adm_ssp_debug_lat_sel_hi_top; /* 0x000250 */
- u64 ce_adm_ssp_debug_trig_sel_top; /* 0x000258 */
- u64 ce_adm_ssp_debug_trig_lat_sel_lo_top; /* 0x000260 */
- u64 ce_adm_ssp_debug_trig_lat_sel_hi_top; /* 0x000268 */
- u64 ce_adm_ssp_trig_compare_top; /* 0x000270 */
- u64 ce_adm_ssp_trig_compare_en_top; /* 0x000278 */
- u64 ce_pad_000280[48]; /* 0x000280 -- 0x0003F8 */
-
- u64 ce_adm_bap_ctrl; /* 0x000400 */
- u64 ce_pad_000408[127]; /* 0x000408 -- 0x0007F8 */
-
- u64 ce_msg_buf_data63_0[35]; /* 0x000800 -- 0x000918 */
- u64 ce_pad_000920[29]; /* 0x000920 -- 0x0009F8 */
-
- u64 ce_msg_buf_data127_64[35]; /* 0x000A00 -- 0x000B18 */
- u64 ce_pad_000B20[29]; /* 0x000B20 -- 0x000BF8 */
-
- u64 ce_msg_buf_parity[35]; /* 0x000C00 -- 0x000D18 */
- u64 ce_pad_000D20[29]; /* 0x000D20 -- 0x000DF8 */
-
- u64 ce_pad_000E00[576]; /* 0x000E00 -- 0x001FF8 */
-
- /*
- * LSI : LSI's PCI Express Link Registers (Link#1 and Link#2)
- * Link#1 MMRs at start at 0x002000, Link#2 MMRs at 0x003000
- * NOTE: the comment offsets at far right: let 'z' = {2 or 3}
- */
- #define ce_lsi(link_num) ce_lsi[link_num-1]
- struct ce_lsi_reg {
- u64 ce_lsi_lpu_id; /* 0x00z000 */
- u64 ce_lsi_rst; /* 0x00z008 */
- u64 ce_lsi_dbg_stat; /* 0x00z010 */
- u64 ce_lsi_dbg_cfg; /* 0x00z018 */
- u64 ce_lsi_ltssm_ctrl; /* 0x00z020 */
- u64 ce_lsi_lk_stat; /* 0x00z028 */
- u64 ce_pad_00z030[2]; /* 0x00z030 -- 0x00z038 */
- u64 ce_lsi_int_and_stat; /* 0x00z040 */
- u64 ce_lsi_int_mask; /* 0x00z048 */
- u64 ce_pad_00z050[22]; /* 0x00z050 -- 0x00z0F8 */
- u64 ce_lsi_lk_perf_cnt_sel; /* 0x00z100 */
- u64 ce_pad_00z108; /* 0x00z108 */
- u64 ce_lsi_lk_perf_cnt_ctrl; /* 0x00z110 */
- u64 ce_pad_00z118; /* 0x00z118 */
- u64 ce_lsi_lk_perf_cnt1; /* 0x00z120 */
- u64 ce_lsi_lk_perf_cnt1_test; /* 0x00z128 */
- u64 ce_lsi_lk_perf_cnt2; /* 0x00z130 */
- u64 ce_lsi_lk_perf_cnt2_test; /* 0x00z138 */
- u64 ce_pad_00z140[24]; /* 0x00z140 -- 0x00z1F8 */
- u64 ce_lsi_lk_lyr_cfg; /* 0x00z200 */
- u64 ce_lsi_lk_lyr_status; /* 0x00z208 */
- u64 ce_lsi_lk_lyr_int_stat; /* 0x00z210 */
- u64 ce_lsi_lk_ly_int_stat_test; /* 0x00z218 */
- u64 ce_lsi_lk_ly_int_stat_mask; /* 0x00z220 */
- u64 ce_pad_00z228[3]; /* 0x00z228 -- 0x00z238 */
- u64 ce_lsi_fc_upd_ctl; /* 0x00z240 */
- u64 ce_pad_00z248[3]; /* 0x00z248 -- 0x00z258 */
- u64 ce_lsi_flw_ctl_upd_to_timer; /* 0x00z260 */
- u64 ce_lsi_flw_ctl_upd_timer0; /* 0x00z268 */
- u64 ce_lsi_flw_ctl_upd_timer1; /* 0x00z270 */
- u64 ce_pad_00z278[49]; /* 0x00z278 -- 0x00z3F8 */
- u64 ce_lsi_freq_nak_lat_thrsh; /* 0x00z400 */
- u64 ce_lsi_ack_nak_lat_tmr; /* 0x00z408 */
- u64 ce_lsi_rply_tmr_thr; /* 0x00z410 */
- u64 ce_lsi_rply_tmr; /* 0x00z418 */
- u64 ce_lsi_rply_num_stat; /* 0x00z420 */
- u64 ce_lsi_rty_buf_max_addr; /* 0x00z428 */
- u64 ce_lsi_rty_fifo_ptr; /* 0x00z430 */
- u64 ce_lsi_rty_fifo_rd_wr_ptr; /* 0x00z438 */
- u64 ce_lsi_rty_fifo_cred; /* 0x00z440 */
- u64 ce_lsi_seq_cnt; /* 0x00z448 */
- u64 ce_lsi_ack_sent_seq_num; /* 0x00z450 */
- u64 ce_lsi_seq_cnt_fifo_max_addr; /* 0x00z458 */
- u64 ce_lsi_seq_cnt_fifo_ptr; /* 0x00z460 */
- u64 ce_lsi_seq_cnt_rd_wr_ptr; /* 0x00z468 */
- u64 ce_lsi_tx_lk_ts_ctl; /* 0x00z470 */
- u64 ce_pad_00z478; /* 0x00z478 */
- u64 ce_lsi_mem_addr_ctl; /* 0x00z480 */
- u64 ce_lsi_mem_d_ld0; /* 0x00z488 */
- u64 ce_lsi_mem_d_ld1; /* 0x00z490 */
- u64 ce_lsi_mem_d_ld2; /* 0x00z498 */
- u64 ce_lsi_mem_d_ld3; /* 0x00z4A0 */
- u64 ce_lsi_mem_d_ld4; /* 0x00z4A8 */
- u64 ce_pad_00z4B0[2]; /* 0x00z4B0 -- 0x00z4B8 */
- u64 ce_lsi_rty_d_cnt; /* 0x00z4C0 */
- u64 ce_lsi_seq_buf_cnt; /* 0x00z4C8 */
- u64 ce_lsi_seq_buf_bt_d; /* 0x00z4D0 */
- u64 ce_pad_00z4D8; /* 0x00z4D8 */
- u64 ce_lsi_ack_lat_thr; /* 0x00z4E0 */
- u64 ce_pad_00z4E8[3]; /* 0x00z4E8 -- 0x00z4F8 */
- u64 ce_lsi_nxt_rcv_seq_1_cntr; /* 0x00z500 */
- u64 ce_lsi_unsp_dllp_rcvd; /* 0x00z508 */
- u64 ce_lsi_rcv_lk_ts_ctl; /* 0x00z510 */
- u64 ce_pad_00z518[29]; /* 0x00z518 -- 0x00z5F8 */
- u64 ce_lsi_phy_lyr_cfg; /* 0x00z600 */
- u64 ce_pad_00z608; /* 0x00z608 */
- u64 ce_lsi_phy_lyr_int_stat; /* 0x00z610 */
- u64 ce_lsi_phy_lyr_int_stat_test; /* 0x00z618 */
- u64 ce_lsi_phy_lyr_int_mask; /* 0x00z620 */
- u64 ce_pad_00z628[11]; /* 0x00z628 -- 0x00z678 */
- u64 ce_lsi_rcv_phy_cfg; /* 0x00z680 */
- u64 ce_lsi_rcv_phy_stat1; /* 0x00z688 */
- u64 ce_lsi_rcv_phy_stat2; /* 0x00z690 */
- u64 ce_lsi_rcv_phy_stat3; /* 0x00z698 */
- u64 ce_lsi_rcv_phy_int_stat; /* 0x00z6A0 */
- u64 ce_lsi_rcv_phy_int_stat_test; /* 0x00z6A8 */
- u64 ce_lsi_rcv_phy_int_mask; /* 0x00z6B0 */
- u64 ce_pad_00z6B8[9]; /* 0x00z6B8 -- 0x00z6F8 */
- u64 ce_lsi_tx_phy_cfg; /* 0x00z700 */
- u64 ce_lsi_tx_phy_stat; /* 0x00z708 */
- u64 ce_lsi_tx_phy_int_stat; /* 0x00z710 */
- u64 ce_lsi_tx_phy_int_stat_test; /* 0x00z718 */
- u64 ce_lsi_tx_phy_int_mask; /* 0x00z720 */
- u64 ce_lsi_tx_phy_stat2; /* 0x00z728 */
- u64 ce_pad_00z730[10]; /* 0x00z730 -- 0x00z77F */
- u64 ce_lsi_ltssm_cfg1; /* 0x00z780 */
- u64 ce_lsi_ltssm_cfg2; /* 0x00z788 */
- u64 ce_lsi_ltssm_cfg3; /* 0x00z790 */
- u64 ce_lsi_ltssm_cfg4; /* 0x00z798 */
- u64 ce_lsi_ltssm_cfg5; /* 0x00z7A0 */
- u64 ce_lsi_ltssm_stat1; /* 0x00z7A8 */
- u64 ce_lsi_ltssm_stat2; /* 0x00z7B0 */
- u64 ce_lsi_ltssm_int_stat; /* 0x00z7B8 */
- u64 ce_lsi_ltssm_int_stat_test; /* 0x00z7C0 */
- u64 ce_lsi_ltssm_int_mask; /* 0x00z7C8 */
- u64 ce_lsi_ltssm_stat_wr_en; /* 0x00z7D0 */
- u64 ce_pad_00z7D8[5]; /* 0x00z7D8 -- 0x00z7F8 */
- u64 ce_lsi_gb_cfg1; /* 0x00z800 */
- u64 ce_lsi_gb_cfg2; /* 0x00z808 */
- u64 ce_lsi_gb_cfg3; /* 0x00z810 */
- u64 ce_lsi_gb_cfg4; /* 0x00z818 */
- u64 ce_lsi_gb_stat; /* 0x00z820 */
- u64 ce_lsi_gb_int_stat; /* 0x00z828 */
- u64 ce_lsi_gb_int_stat_test; /* 0x00z830 */
- u64 ce_lsi_gb_int_mask; /* 0x00z838 */
- u64 ce_lsi_gb_pwr_dn1; /* 0x00z840 */
- u64 ce_lsi_gb_pwr_dn2; /* 0x00z848 */
- u64 ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */
- } ce_lsi[2];
-
- u64 ce_pad_004000[10]; /* 0x004000 -- 0x004048 */
-
- /*
- * CRM: Coretalk Receive Module Registers
- */
- u64 ce_crm_debug_mux; /* 0x004050 */
- u64 ce_pad_004058; /* 0x004058 */
- u64 ce_crm_ssp_err_cmd_wrd; /* 0x004060 */
- u64 ce_crm_ssp_err_addr; /* 0x004068 */
- u64 ce_crm_ssp_err_syn; /* 0x004070 */
-
- u64 ce_pad_004078[499]; /* 0x004078 -- 0x005008 */
-
- /*
- * CXM: Coretalk Xmit Module Registers
- */
- u64 ce_cxm_dyn_credit_status; /* 0x005010 */
- u64 ce_cxm_last_credit_status; /* 0x005018 */
- u64 ce_cxm_credit_limit; /* 0x005020 */
- u64 ce_cxm_force_credit; /* 0x005028 */
- u64 ce_cxm_disable_bypass; /* 0x005030 */
- u64 ce_pad_005038[3]; /* 0x005038 -- 0x005048 */
- u64 ce_cxm_debug_mux; /* 0x005050 */
-
- u64 ce_pad_005058[501]; /* 0x005058 -- 0x005FF8 */
-
- /*
- * DTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
- * DTL: Link#1 MMRs at start at 0x006000, Link#2 MMRs at 0x008000
- * DTL: the comment offsets at far right: let 'y' = {6 or 8}
- *
- * UTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
- * UTL: Link#1 MMRs at start at 0x007000, Link#2 MMRs at 0x009000
- * UTL: the comment offsets at far right: let 'z' = {7 or 9}
- */
- #define ce_dtl(link_num) ce_dtl_utl[link_num-1]
- #define ce_utl(link_num) ce_dtl_utl[link_num-1]
- struct ce_dtl_utl_reg {
- /* DTL */
- u64 ce_dtl_dtdr_credit_limit; /* 0x00y000 */
- u64 ce_dtl_dtdr_credit_force; /* 0x00y008 */
- u64 ce_dtl_dyn_credit_status; /* 0x00y010 */
- u64 ce_dtl_dtl_last_credit_stat; /* 0x00y018 */
- u64 ce_dtl_dtl_ctrl; /* 0x00y020 */
- u64 ce_pad_00y028[5]; /* 0x00y028 -- 0x00y048 */
- u64 ce_dtl_debug_sel; /* 0x00y050 */
- u64 ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */
-
- /* UTL */
- u64 ce_utl_utl_ctrl; /* 0x00z000 */
- u64 ce_utl_debug_sel; /* 0x00z008 */
- u64 ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */
- } ce_dtl_utl[2];
-
- u64 ce_pad_00A000[514]; /* 0x00A000 -- 0x00B008 */
-
- /*
- * URE: Upstream Request Engine
- */
- u64 ce_ure_dyn_credit_status; /* 0x00B010 */
- u64 ce_ure_last_credit_status; /* 0x00B018 */
- u64 ce_ure_credit_limit; /* 0x00B020 */
- u64 ce_pad_00B028; /* 0x00B028 */
- u64 ce_ure_control; /* 0x00B030 */
- u64 ce_ure_status; /* 0x00B038 */
- u64 ce_pad_00B040[2]; /* 0x00B040 -- 0x00B048 */
- u64 ce_ure_debug_sel; /* 0x00B050 */
- u64 ce_ure_pcie_debug_sel; /* 0x00B058 */
- u64 ce_ure_ssp_err_cmd_wrd; /* 0x00B060 */
- u64 ce_ure_ssp_err_addr; /* 0x00B068 */
- u64 ce_ure_page_map; /* 0x00B070 */
- u64 ce_ure_dir_map[TIOCE_NUM_PORTS]; /* 0x00B078 */
- u64 ce_ure_pipe_sel1; /* 0x00B088 */
- u64 ce_ure_pipe_mask1; /* 0x00B090 */
- u64 ce_ure_pipe_sel2; /* 0x00B098 */
- u64 ce_ure_pipe_mask2; /* 0x00B0A0 */
- u64 ce_ure_pcie1_credits_sent; /* 0x00B0A8 */
- u64 ce_ure_pcie1_credits_used; /* 0x00B0B0 */
- u64 ce_ure_pcie1_credit_limit; /* 0x00B0B8 */
- u64 ce_ure_pcie2_credits_sent; /* 0x00B0C0 */
- u64 ce_ure_pcie2_credits_used; /* 0x00B0C8 */
- u64 ce_ure_pcie2_credit_limit; /* 0x00B0D0 */
- u64 ce_ure_pcie_force_credit; /* 0x00B0D8 */
- u64 ce_ure_rd_tnum_val; /* 0x00B0E0 */
- u64 ce_ure_rd_tnum_rsp_rcvd; /* 0x00B0E8 */
- u64 ce_ure_rd_tnum_esent_timer; /* 0x00B0F0 */
- u64 ce_ure_rd_tnum_error; /* 0x00B0F8 */
- u64 ce_ure_rd_tnum_first_cl; /* 0x00B100 */
- u64 ce_ure_rd_tnum_link_buf; /* 0x00B108 */
- u64 ce_ure_wr_tnum_val; /* 0x00B110 */
- u64 ce_ure_sram_err_addr0; /* 0x00B118 */
- u64 ce_ure_sram_err_addr1; /* 0x00B120 */
- u64 ce_ure_sram_err_addr2; /* 0x00B128 */
- u64 ce_ure_sram_rd_addr0; /* 0x00B130 */
- u64 ce_ure_sram_rd_addr1; /* 0x00B138 */
- u64 ce_ure_sram_rd_addr2; /* 0x00B140 */
- u64 ce_ure_sram_wr_addr0; /* 0x00B148 */
- u64 ce_ure_sram_wr_addr1; /* 0x00B150 */
- u64 ce_ure_sram_wr_addr2; /* 0x00B158 */
- u64 ce_ure_buf_flush10; /* 0x00B160 */
- u64 ce_ure_buf_flush11; /* 0x00B168 */
- u64 ce_ure_buf_flush12; /* 0x00B170 */
- u64 ce_ure_buf_flush13; /* 0x00B178 */
- u64 ce_ure_buf_flush20; /* 0x00B180 */
- u64 ce_ure_buf_flush21; /* 0x00B188 */
- u64 ce_ure_buf_flush22; /* 0x00B190 */
- u64 ce_ure_buf_flush23; /* 0x00B198 */
- u64 ce_ure_pcie_control1; /* 0x00B1A0 */
- u64 ce_ure_pcie_control2; /* 0x00B1A8 */
-
- u64 ce_pad_00B1B0[458]; /* 0x00B1B0 -- 0x00BFF8 */
-
- /* Upstream Data Buffer, Port1 */
- struct ce_ure_maint_ups_dat1_data {
- u64 data63_0[512]; /* 0x00C000 -- 0x00CFF8 */
- u64 data127_64[512]; /* 0x00D000 -- 0x00DFF8 */
- u64 parity[512]; /* 0x00E000 -- 0x00EFF8 */
- } ce_ure_maint_ups_dat1;
-
- /* Upstream Header Buffer, Port1 */
- struct ce_ure_maint_ups_hdr1_data {
- u64 data63_0[512]; /* 0x00F000 -- 0x00FFF8 */
- u64 data127_64[512]; /* 0x010000 -- 0x010FF8 */
- u64 parity[512]; /* 0x011000 -- 0x011FF8 */
- } ce_ure_maint_ups_hdr1;
-
- /* Upstream Data Buffer, Port2 */
- struct ce_ure_maint_ups_dat2_data {
- u64 data63_0[512]; /* 0x012000 -- 0x012FF8 */
- u64 data127_64[512]; /* 0x013000 -- 0x013FF8 */
- u64 parity[512]; /* 0x014000 -- 0x014FF8 */
- } ce_ure_maint_ups_dat2;
-
- /* Upstream Header Buffer, Port2 */
- struct ce_ure_maint_ups_hdr2_data {
- u64 data63_0[512]; /* 0x015000 -- 0x015FF8 */
- u64 data127_64[512]; /* 0x016000 -- 0x016FF8 */
- u64 parity[512]; /* 0x017000 -- 0x017FF8 */
- } ce_ure_maint_ups_hdr2;
-
- /* Downstream Data Buffer */
- struct ce_ure_maint_dns_dat_data {
- u64 data63_0[512]; /* 0x018000 -- 0x018FF8 */
- u64 data127_64[512]; /* 0x019000 -- 0x019FF8 */
- u64 parity[512]; /* 0x01A000 -- 0x01AFF8 */
- } ce_ure_maint_dns_dat;
-
- /* Downstream Header Buffer */
- struct ce_ure_maint_dns_hdr_data {
- u64 data31_0[64]; /* 0x01B000 -- 0x01B1F8 */
- u64 data95_32[64]; /* 0x01B200 -- 0x01B3F8 */
- u64 parity[64]; /* 0x01B400 -- 0x01B5F8 */
- } ce_ure_maint_dns_hdr;
-
- /* RCI Buffer Data */
- struct ce_ure_maint_rci_data {
- u64 data41_0[64]; /* 0x01B600 -- 0x01B7F8 */
- u64 data69_42[64]; /* 0x01B800 -- 0x01B9F8 */
- } ce_ure_maint_rci;
-
- /* Response Queue */
- u64 ce_ure_maint_rspq[64]; /* 0x01BA00 -- 0x01BBF8 */
-
- u64 ce_pad_01C000[4224]; /* 0x01BC00 -- 0x023FF8 */
-
- /* Admin Build-a-Packet Buffer */
- struct ce_adm_maint_bap_buf_data {
- u64 data63_0[258]; /* 0x024000 -- 0x024808 */
- u64 data127_64[258]; /* 0x024810 -- 0x025018 */
- u64 parity[258]; /* 0x025020 -- 0x025828 */
- } ce_adm_maint_bap_buf;
-
- u64 ce_pad_025830[5370]; /* 0x025830 -- 0x02FFF8 */
-
- /* URE: 40bit PMU ATE Buffer */ /* 0x030000 -- 0x037FF8 */
- u64 ce_ure_ate40[TIOCE_NUM_M40_ATES];
-
- /* URE: 32/40bit PMU ATE Buffer */ /* 0x038000 -- 0x03BFF8 */
- u64 ce_ure_ate3240[TIOCE_NUM_M3240_ATES];
-
- u64 ce_pad_03C000[2050]; /* 0x03C000 -- 0x040008 */
-
- /*
- * DRE: Down Stream Request Engine
- */
- u64 ce_dre_dyn_credit_status1; /* 0x040010 */
- u64 ce_dre_dyn_credit_status2; /* 0x040018 */
- u64 ce_dre_last_credit_status1; /* 0x040020 */
- u64 ce_dre_last_credit_status2; /* 0x040028 */
- u64 ce_dre_credit_limit1; /* 0x040030 */
- u64 ce_dre_credit_limit2; /* 0x040038 */
- u64 ce_dre_force_credit1; /* 0x040040 */
- u64 ce_dre_force_credit2; /* 0x040048 */
- u64 ce_dre_debug_mux1; /* 0x040050 */
- u64 ce_dre_debug_mux2; /* 0x040058 */
- u64 ce_dre_ssp_err_cmd_wrd; /* 0x040060 */
- u64 ce_dre_ssp_err_addr; /* 0x040068 */
- u64 ce_dre_comp_err_cmd_wrd; /* 0x040070 */
- u64 ce_dre_comp_err_addr; /* 0x040078 */
- u64 ce_dre_req_status; /* 0x040080 */
- u64 ce_dre_config1; /* 0x040088 */
- u64 ce_dre_config2; /* 0x040090 */
- u64 ce_dre_config_req_status; /* 0x040098 */
- u64 ce_pad_0400A0[12]; /* 0x0400A0 -- 0x0400F8 */
- u64 ce_dre_dyn_fifo; /* 0x040100 */
- u64 ce_pad_040108[3]; /* 0x040108 -- 0x040118 */
- u64 ce_dre_last_fifo; /* 0x040120 */
-
- u64 ce_pad_040128[27]; /* 0x040128 -- 0x0401F8 */
-
- /* DRE Downstream Head Queue */
- struct ce_dre_maint_ds_head_queue {
- u64 data63_0[32]; /* 0x040200 -- 0x0402F8 */
- u64 data127_64[32]; /* 0x040300 -- 0x0403F8 */
- u64 parity[32]; /* 0x040400 -- 0x0404F8 */
- } ce_dre_maint_ds_head_q;
-
- u64 ce_pad_040500[352]; /* 0x040500 -- 0x040FF8 */
-
- /* DRE Downstream Data Queue */
- struct ce_dre_maint_ds_data_queue {
- u64 data63_0[256]; /* 0x041000 -- 0x0417F8 */
- u64 ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */
- u64 data127_64[256]; /* 0x042000 -- 0x0427F8 */
- u64 ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */
- u64 parity[256]; /* 0x043000 -- 0x0437F8 */
- u64 ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */
- } ce_dre_maint_ds_data_q;
-
- /* DRE URE Upstream Response Queue */
- struct ce_dre_maint_ure_us_rsp_queue {
- u64 data63_0[8]; /* 0x044000 -- 0x044038 */
- u64 ce_pad_044040[24]; /* 0x044040 -- 0x0440F8 */
- u64 data127_64[8]; /* 0x044100 -- 0x044138 */
- u64 ce_pad_044140[24]; /* 0x044140 -- 0x0441F8 */
- u64 parity[8]; /* 0x044200 -- 0x044238 */
- u64 ce_pad_044240[24]; /* 0x044240 -- 0x0442F8 */
- } ce_dre_maint_ure_us_rsp_q;
-
- u64 ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */
-
- u64 ce_end_of_struct; /* 0x044400 */
-} tioce_t;
-
-/* ce_lsiX_gb_cfg1 register bit masks & shifts */
-#define CE_LSI_GB_CFG1_RXL0S_THS_SHFT 0
-#define CE_LSI_GB_CFG1_RXL0S_THS_MASK (0xffULL << 0)
-#define CE_LSI_GB_CFG1_RXL0S_SMP_SHFT 8
-#define CE_LSI_GB_CFG1_RXL0S_SMP_MASK (0xfULL << 8)
-#define CE_LSI_GB_CFG1_RXL0S_ADJ_SHFT 12
-#define CE_LSI_GB_CFG1_RXL0S_ADJ_MASK (0x7ULL << 12)
-#define CE_LSI_GB_CFG1_RXL0S_FLT_SHFT 15
-#define CE_LSI_GB_CFG1_RXL0S_FLT_MASK (0x1ULL << 15)
-#define CE_LSI_GB_CFG1_LPBK_SEL_SHFT 16
-#define CE_LSI_GB_CFG1_LPBK_SEL_MASK (0x3ULL << 16)
-#define CE_LSI_GB_CFG1_LPBK_EN_SHFT 18
-#define CE_LSI_GB_CFG1_LPBK_EN_MASK (0x1ULL << 18)
-#define CE_LSI_GB_CFG1_RVRS_LB_SHFT 19
-#define CE_LSI_GB_CFG1_RVRS_LB_MASK (0x1ULL << 19)
-#define CE_LSI_GB_CFG1_RVRS_CLK_SHFT 20
-#define CE_LSI_GB_CFG1_RVRS_CLK_MASK (0x3ULL << 20)
-#define CE_LSI_GB_CFG1_SLF_TS_SHFT 24
-#define CE_LSI_GB_CFG1_SLF_TS_MASK (0xfULL << 24)
-
-/* ce_adm_int_mask/ce_adm_int_status register bit defines */
-#define CE_ADM_INT_CE_ERROR_SHFT 0
-#define CE_ADM_INT_LSI1_IP_ERROR_SHFT 1
-#define CE_ADM_INT_LSI2_IP_ERROR_SHFT 2
-#define CE_ADM_INT_PCIE_ERROR_SHFT 3
-#define CE_ADM_INT_PORT1_HOTPLUG_EVENT_SHFT 4
-#define CE_ADM_INT_PORT2_HOTPLUG_EVENT_SHFT 5
-#define CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT 6
-#define CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT 7
-#define CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT 8
-#define CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT 9
-#define CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT 10
-#define CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT 11
-#define CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT 12
-#define CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT 13
-#define CE_ADM_INT_PCIE_MSG_SHFT 14 /*see int_dest_14*/
-#define CE_ADM_INT_PCIE_MSG_SLOT_0_SHFT 14
-#define CE_ADM_INT_PCIE_MSG_SLOT_1_SHFT 15
-#define CE_ADM_INT_PCIE_MSG_SLOT_2_SHFT 16
-#define CE_ADM_INT_PCIE_MSG_SLOT_3_SHFT 17
-#define CE_ADM_INT_PORT1_PM_PME_MSG_SHFT 22
-#define CE_ADM_INT_PORT2_PM_PME_MSG_SHFT 23
-
-/* ce_adm_force_int register bit defines */
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT 0
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT 1
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT 2
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT 3
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT 4
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT 5
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT 6
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT 7
-#define CE_ADM_FORCE_INT_ALWAYS_SHFT 8
-
-/* ce_adm_int_dest register bit masks & shifts */
-#define INTR_VECTOR_SHFT 56
-
-/* ce_adm_error_mask and ce_adm_error_summary register bit masks */
-#define CE_ADM_ERR_CRM_SSP_REQ_INVALID (0x1ULL << 0)
-#define CE_ADM_ERR_SSP_REQ_HEADER (0x1ULL << 1)
-#define CE_ADM_ERR_SSP_RSP_HEADER (0x1ULL << 2)
-#define CE_ADM_ERR_SSP_PROTOCOL_ERROR (0x1ULL << 3)
-#define CE_ADM_ERR_SSP_SBE (0x1ULL << 4)
-#define CE_ADM_ERR_SSP_MBE (0x1ULL << 5)
-#define CE_ADM_ERR_CXM_CREDIT_OFLOW (0x1ULL << 6)
-#define CE_ADM_ERR_DRE_SSP_REQ_INVAL (0x1ULL << 7)
-#define CE_ADM_ERR_SSP_REQ_LONG (0x1ULL << 8)
-#define CE_ADM_ERR_SSP_REQ_OFLOW (0x1ULL << 9)
-#define CE_ADM_ERR_SSP_REQ_SHORT (0x1ULL << 10)
-#define CE_ADM_ERR_SSP_REQ_SIDEBAND (0x1ULL << 11)
-#define CE_ADM_ERR_SSP_REQ_ADDR_ERR (0x1ULL << 12)
-#define CE_ADM_ERR_SSP_REQ_BAD_BE (0x1ULL << 13)
-#define CE_ADM_ERR_PCIE_COMPL_TIMEOUT (0x1ULL << 14)
-#define CE_ADM_ERR_PCIE_UNEXP_COMPL (0x1ULL << 15)
-#define CE_ADM_ERR_PCIE_ERR_COMPL (0x1ULL << 16)
-#define CE_ADM_ERR_DRE_CREDIT_OFLOW (0x1ULL << 17)
-#define CE_ADM_ERR_DRE_SRAM_PE (0x1ULL << 18)
-#define CE_ADM_ERR_SSP_RSP_INVALID (0x1ULL << 19)
-#define CE_ADM_ERR_SSP_RSP_LONG (0x1ULL << 20)
-#define CE_ADM_ERR_SSP_RSP_SHORT (0x1ULL << 21)
-#define CE_ADM_ERR_SSP_RSP_SIDEBAND (0x1ULL << 22)
-#define CE_ADM_ERR_URE_SSP_RSP_UNEXP (0x1ULL << 23)
-#define CE_ADM_ERR_URE_SSP_WR_REQ_TIMEOUT (0x1ULL << 24)
-#define CE_ADM_ERR_URE_SSP_RD_REQ_TIMEOUT (0x1ULL << 25)
-#define CE_ADM_ERR_URE_ATE3240_PAGE_FAULT (0x1ULL << 26)
-#define CE_ADM_ERR_URE_ATE40_PAGE_FAULT (0x1ULL << 27)
-#define CE_ADM_ERR_URE_CREDIT_OFLOW (0x1ULL << 28)
-#define CE_ADM_ERR_URE_SRAM_PE (0x1ULL << 29)
-#define CE_ADM_ERR_ADM_SSP_RSP_UNEXP (0x1ULL << 30)
-#define CE_ADM_ERR_ADM_SSP_REQ_TIMEOUT (0x1ULL << 31)
-#define CE_ADM_ERR_MMR_ACCESS_ERROR (0x1ULL << 32)
-#define CE_ADM_ERR_MMR_ADDR_ERROR (0x1ULL << 33)
-#define CE_ADM_ERR_ADM_CREDIT_OFLOW (0x1ULL << 34)
-#define CE_ADM_ERR_ADM_SRAM_PE (0x1ULL << 35)
-#define CE_ADM_ERR_DTL1_MIN_PDATA_CREDIT_ERR (0x1ULL << 36)
-#define CE_ADM_ERR_DTL1_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 37)
-#define CE_ADM_ERR_DTL1_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 38)
-#define CE_ADM_ERR_DTL1_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 39)
-#define CE_ADM_ERR_DTL1_COMP_HD_CRED_MAX_ERR (0x1ULL << 40)
-#define CE_ADM_ERR_DTL1_COMP_D_CRED_MAX_ERR (0x1ULL << 41)
-#define CE_ADM_ERR_DTL1_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 42)
-#define CE_ADM_ERR_DTL1_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 43)
-#define CE_ADM_ERR_DTL1_POSTED_HD_CRED_MAX_ERR (0x1ULL << 44)
-#define CE_ADM_ERR_DTL1_POSTED_D_CRED_MAX_ERR (0x1ULL << 45)
-#define CE_ADM_ERR_DTL2_MIN_PDATA_CREDIT_ERR (0x1ULL << 46)
-#define CE_ADM_ERR_DTL2_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 47)
-#define CE_ADM_ERR_DTL2_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 48)
-#define CE_ADM_ERR_DTL2_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 49)
-#define CE_ADM_ERR_DTL2_COMP_HD_CRED_MAX_ERR (0x1ULL << 50)
-#define CE_ADM_ERR_DTL2_COMP_D_CRED_MAX_ERR (0x1ULL << 51)
-#define CE_ADM_ERR_DTL2_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 52)
-#define CE_ADM_ERR_DTL2_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 53)
-#define CE_ADM_ERR_DTL2_POSTED_HD_CRED_MAX_ERR (0x1ULL << 54)
-#define CE_ADM_ERR_DTL2_POSTED_D_CRED_MAX_ERR (0x1ULL << 55)
-#define CE_ADM_ERR_PORT1_PCIE_COR_ERR (0x1ULL << 56)
-#define CE_ADM_ERR_PORT1_PCIE_NFAT_ERR (0x1ULL << 57)
-#define CE_ADM_ERR_PORT1_PCIE_FAT_ERR (0x1ULL << 58)
-#define CE_ADM_ERR_PORT2_PCIE_COR_ERR (0x1ULL << 59)
-#define CE_ADM_ERR_PORT2_PCIE_NFAT_ERR (0x1ULL << 60)
-#define CE_ADM_ERR_PORT2_PCIE_FAT_ERR (0x1ULL << 61)
-
-/* ce_adm_ure_ups_buf_barrier_flush register bit masks and shifts */
-#define FLUSH_SEL_PORT1_PIPE0_SHFT 0
-#define FLUSH_SEL_PORT1_PIPE1_SHFT 4
-#define FLUSH_SEL_PORT1_PIPE2_SHFT 8
-#define FLUSH_SEL_PORT1_PIPE3_SHFT 12
-#define FLUSH_SEL_PORT2_PIPE0_SHFT 16
-#define FLUSH_SEL_PORT2_PIPE1_SHFT 20
-#define FLUSH_SEL_PORT2_PIPE2_SHFT 24
-#define FLUSH_SEL_PORT2_PIPE3_SHFT 28
-
-/* ce_dre_config1 register bit masks and shifts */
-#define CE_DRE_RO_ENABLE (0x1ULL << 0)
-#define CE_DRE_DYN_RO_ENABLE (0x1ULL << 1)
-#define CE_DRE_SUP_CONFIG_COMP_ERROR (0x1ULL << 2)
-#define CE_DRE_SUP_IO_COMP_ERROR (0x1ULL << 3)
-#define CE_DRE_ADDR_MODE_SHFT 4
-
-/* ce_dre_config_req_status register bit masks */
-#define CE_DRE_LAST_CONFIG_COMPLETION (0x7ULL << 0)
-#define CE_DRE_DOWNSTREAM_CONFIG_ERROR (0x1ULL << 3)
-#define CE_DRE_CONFIG_COMPLETION_VALID (0x1ULL << 4)
-#define CE_DRE_CONFIG_REQUEST_ACTIVE (0x1ULL << 5)
-
-/* ce_ure_control register bit masks & shifts */
-#define CE_URE_RD_MRG_ENABLE (0x1ULL << 0)
-#define CE_URE_WRT_MRG_ENABLE1 (0x1ULL << 4)
-#define CE_URE_WRT_MRG_ENABLE2 (0x1ULL << 5)
-#define CE_URE_WRT_MRG_TIMER_SHFT 12
-#define CE_URE_WRT_MRG_TIMER_MASK (0x7FFULL << CE_URE_WRT_MRG_TIMER_SHFT)
-#define CE_URE_WRT_MRG_TIMER(x) (((u64)(x) << \
- CE_URE_WRT_MRG_TIMER_SHFT) & \
- CE_URE_WRT_MRG_TIMER_MASK)
-#define CE_URE_RSPQ_BYPASS_DISABLE (0x1ULL << 24)
-#define CE_URE_UPS_DAT1_PAR_DISABLE (0x1ULL << 32)
-#define CE_URE_UPS_HDR1_PAR_DISABLE (0x1ULL << 33)
-#define CE_URE_UPS_DAT2_PAR_DISABLE (0x1ULL << 34)
-#define CE_URE_UPS_HDR2_PAR_DISABLE (0x1ULL << 35)
-#define CE_URE_ATE_PAR_DISABLE (0x1ULL << 36)
-#define CE_URE_RCI_PAR_DISABLE (0x1ULL << 37)
-#define CE_URE_RSPQ_PAR_DISABLE (0x1ULL << 38)
-#define CE_URE_DNS_DAT_PAR_DISABLE (0x1ULL << 39)
-#define CE_URE_DNS_HDR_PAR_DISABLE (0x1ULL << 40)
-#define CE_URE_MALFORM_DISABLE (0x1ULL << 44)
-#define CE_URE_UNSUP_DISABLE (0x1ULL << 45)
-
-/* ce_ure_page_map register bit masks & shifts */
-#define CE_URE_ATE3240_ENABLE (0x1ULL << 0)
-#define CE_URE_ATE40_ENABLE (0x1ULL << 1)
-#define CE_URE_PAGESIZE_SHFT 4
-#define CE_URE_PAGESIZE_MASK (0x7ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_4K_PAGESIZE (0x0ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_16K_PAGESIZE (0x1ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_64K_PAGESIZE (0x2ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_128K_PAGESIZE (0x3ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_256K_PAGESIZE (0x4ULL << CE_URE_PAGESIZE_SHFT)
-
-/* ce_ure_pipe_sel register bit masks & shifts */
-#define PKT_TRAFIC_SHRT 16
-#define BUS_SRC_ID_SHFT 8
-#define DEV_SRC_ID_SHFT 3
-#define FNC_SRC_ID_SHFT 0
-#define CE_URE_TC_MASK (0x07ULL << PKT_TRAFIC_SHRT)
-#define CE_URE_BUS_MASK (0xFFULL << BUS_SRC_ID_SHFT)
-#define CE_URE_DEV_MASK (0x1FULL << DEV_SRC_ID_SHFT)
-#define CE_URE_FNC_MASK (0x07ULL << FNC_SRC_ID_SHFT)
-#define CE_URE_PIPE_BUS(b) (((u64)(b) << BUS_SRC_ID_SHFT) & \
- CE_URE_BUS_MASK)
-#define CE_URE_PIPE_DEV(d) (((u64)(d) << DEV_SRC_ID_SHFT) & \
- CE_URE_DEV_MASK)
-#define CE_URE_PIPE_FNC(f) (((u64)(f) << FNC_SRC_ID_SHFT) & \
- CE_URE_FNC_MASK)
-
-#define CE_URE_SEL1_SHFT 0
-#define CE_URE_SEL2_SHFT 20
-#define CE_URE_SEL3_SHFT 40
-#define CE_URE_SEL1_MASK (0x7FFFFULL << CE_URE_SEL1_SHFT)
-#define CE_URE_SEL2_MASK (0x7FFFFULL << CE_URE_SEL2_SHFT)
-#define CE_URE_SEL3_MASK (0x7FFFFULL << CE_URE_SEL3_SHFT)
-
-
-/* ce_ure_pipe_mask register bit masks & shifts */
-#define CE_URE_MASK1_SHFT 0
-#define CE_URE_MASK2_SHFT 20
-#define CE_URE_MASK3_SHFT 40
-#define CE_URE_MASK1_MASK (0x7FFFFULL << CE_URE_MASK1_SHFT)
-#define CE_URE_MASK2_MASK (0x7FFFFULL << CE_URE_MASK2_SHFT)
-#define CE_URE_MASK3_MASK (0x7FFFFULL << CE_URE_MASK3_SHFT)
-
-
-/* ce_ure_pcie_control1 register bit masks & shifts */
-#define CE_URE_SI (0x1ULL << 0)
-#define CE_URE_ELAL_SHFT 4
-#define CE_URE_ELAL_MASK (0x7ULL << CE_URE_ELAL_SHFT)
-#define CE_URE_ELAL_SET(n) (((u64)(n) << CE_URE_ELAL_SHFT) & \
- CE_URE_ELAL_MASK)
-#define CE_URE_ELAL1_SHFT 8
-#define CE_URE_ELAL1_MASK (0x7ULL << CE_URE_ELAL1_SHFT)
-#define CE_URE_ELAL1_SET(n) (((u64)(n) << CE_URE_ELAL1_SHFT) & \
- CE_URE_ELAL1_MASK)
-#define CE_URE_SCC (0x1ULL << 12)
-#define CE_URE_PN1_SHFT 16
-#define CE_URE_PN1_MASK (0xFFULL << CE_URE_PN1_SHFT)
-#define CE_URE_PN2_SHFT 24
-#define CE_URE_PN2_MASK (0xFFULL << CE_URE_PN2_SHFT)
-#define CE_URE_PN1_SET(n) (((u64)(n) << CE_URE_PN1_SHFT) & \
- CE_URE_PN1_MASK)
-#define CE_URE_PN2_SET(n) (((u64)(n) << CE_URE_PN2_SHFT) & \
- CE_URE_PN2_MASK)
-
-/* ce_ure_pcie_control2 register bit masks & shifts */
-#define CE_URE_ABP (0x1ULL << 0)
-#define CE_URE_PCP (0x1ULL << 1)
-#define CE_URE_MSP (0x1ULL << 2)
-#define CE_URE_AIP (0x1ULL << 3)
-#define CE_URE_PIP (0x1ULL << 4)
-#define CE_URE_HPS (0x1ULL << 5)
-#define CE_URE_HPC (0x1ULL << 6)
-#define CE_URE_SPLV_SHFT 7
-#define CE_URE_SPLV_MASK (0xFFULL << CE_URE_SPLV_SHFT)
-#define CE_URE_SPLV_SET(n) (((u64)(n) << CE_URE_SPLV_SHFT) & \
- CE_URE_SPLV_MASK)
-#define CE_URE_SPLS_SHFT 15
-#define CE_URE_SPLS_MASK (0x3ULL << CE_URE_SPLS_SHFT)
-#define CE_URE_SPLS_SET(n) (((u64)(n) << CE_URE_SPLS_SHFT) & \
- CE_URE_SPLS_MASK)
-#define CE_URE_PSN1_SHFT 19
-#define CE_URE_PSN1_MASK (0x1FFFULL << CE_URE_PSN1_SHFT)
-#define CE_URE_PSN2_SHFT 32
-#define CE_URE_PSN2_MASK (0x1FFFULL << CE_URE_PSN2_SHFT)
-#define CE_URE_PSN1_SET(n) (((u64)(n) << CE_URE_PSN1_SHFT) & \
- CE_URE_PSN1_MASK)
-#define CE_URE_PSN2_SET(n) (((u64)(n) << CE_URE_PSN2_SHFT) & \
- CE_URE_PSN2_MASK)
-
-/*
- * PIO address space ranges for CE
- */
-
-/* Local CE Registers Space */
-#define CE_PIO_MMR 0x00000000
-#define CE_PIO_MMR_LEN 0x04000000
-
-/* PCI Compatible Config Space */
-#define CE_PIO_CONFIG_SPACE 0x04000000
-#define CE_PIO_CONFIG_SPACE_LEN 0x04000000
-
-/* PCI I/O Space Alias */
-#define CE_PIO_IO_SPACE_ALIAS 0x08000000
-#define CE_PIO_IO_SPACE_ALIAS_LEN 0x08000000
-
-/* PCI Enhanced Config Space */
-#define CE_PIO_E_CONFIG_SPACE 0x10000000
-#define CE_PIO_E_CONFIG_SPACE_LEN 0x10000000
-
-/* PCI I/O Space */
-#define CE_PIO_IO_SPACE 0x100000000
-#define CE_PIO_IO_SPACE_LEN 0x100000000
-
-/* PCI MEM Space */
-#define CE_PIO_MEM_SPACE 0x200000000
-#define CE_PIO_MEM_SPACE_LEN TIO_HWIN_SIZE
-
-
-/*
- * CE PCI Enhanced Config Space shifts & masks
- */
-#define CE_E_CONFIG_BUS_SHFT 20
-#define CE_E_CONFIG_BUS_MASK (0xFF << CE_E_CONFIG_BUS_SHFT)
-#define CE_E_CONFIG_DEVICE_SHFT 15
-#define CE_E_CONFIG_DEVICE_MASK (0x1F << CE_E_CONFIG_DEVICE_SHFT)
-#define CE_E_CONFIG_FUNC_SHFT 12
-#define CE_E_CONFIG_FUNC_MASK (0x7 << CE_E_CONFIG_FUNC_SHFT)
-
-#endif /* __ASM_IA64_SN_TIOCE_H__ */
diff --git a/arch/ia64/include/asm/sn/tioce_provider.h b/arch/ia64/include/asm/sn/tioce_provider.h
deleted file mode 100644
index 32c32f30b099..000000000000
--- a/arch/ia64/include/asm/sn/tioce_provider.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_CE_PROVIDER_H
-#define _ASM_IA64_SN_CE_PROVIDER_H
-
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/tioce.h>
-
-/*
- * Common TIOCE structure shared between the prom and kernel
- *
- * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE
- * PROM VERSION.
- */
-struct tioce_common {
- struct pcibus_bussoft ce_pcibus; /* common pciio header */
-
- u32 ce_rev;
- u64 ce_kernel_private;
- u64 ce_prom_private;
-};
-
-struct tioce_kernel {
- struct tioce_common *ce_common;
- spinlock_t ce_lock;
- struct list_head ce_dmamap_list;
-
- u64 ce_ate40_shadow[TIOCE_NUM_M40_ATES];
- u64 ce_ate3240_shadow[TIOCE_NUM_M3240_ATES];
- u32 ce_ate3240_pagesize;
-
- u8 ce_port1_secondary;
-
- /* per-port resources */
- struct {
- int dirmap_refcnt;
- u64 dirmap_shadow;
- } ce_port[TIOCE_NUM_PORTS];
-};
-
-struct tioce_dmamap {
- struct list_head ce_dmamap_list; /* headed by tioce_kernel */
- u32 refcnt;
-
- u64 nbytes; /* # bytes mapped */
-
- u64 ct_start; /* coretalk start address */
- u64 pci_start; /* bus start address */
-
- u64 __iomem *ate_hw;/* hw ptr of first ate in map */
- u64 *ate_shadow; /* shadow ptr of firat ate */
- u16 ate_count; /* # ate's in the map */
-};
-
-extern int tioce_init_provider(void);
-
-#endif /* __ASM_IA64_SN_CE_PROVIDER_H */
diff --git a/arch/ia64/include/asm/sn/tiocp.h b/arch/ia64/include/asm/sn/tiocp.h
deleted file mode 100644
index e8ad0bb5b6c5..000000000000
--- a/arch/ia64/include/asm/sn/tiocp.h
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_TIOCP_H
-#define _ASM_IA64_SN_PCI_TIOCP_H
-
-#define TIOCP_HOST_INTR_ADDR 0x003FFFFFFFFFFFFFUL
-#define TIOCP_PCI64_CMDTYPE_MEM (0x1ull << 60)
-#define TIOCP_PCI64_CMDTYPE_MSI (0x3ull << 60)
-
-
-/*****************************************************************************
- *********************** TIOCP MMR structure mapping ***************************
- *****************************************************************************/
-
-struct tiocp{
-
- /* 0x000000-0x00FFFF -- Local Registers */
-
- /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */
- u64 cp_id; /* 0x000000 */
- u64 cp_stat; /* 0x000008 */
- u64 cp_err_upper; /* 0x000010 */
- u64 cp_err_lower; /* 0x000018 */
- #define cp_err cp_err_lower
- u64 cp_control; /* 0x000020 */
- u64 cp_req_timeout; /* 0x000028 */
- u64 cp_intr_upper; /* 0x000030 */
- u64 cp_intr_lower; /* 0x000038 */
- #define cp_intr cp_intr_lower
- u64 cp_err_cmdword; /* 0x000040 */
- u64 _pad_000048; /* 0x000048 */
- u64 cp_tflush; /* 0x000050 */
-
- /* 0x000058-0x00007F -- Bridge-specific Configuration */
- u64 cp_aux_err; /* 0x000058 */
- u64 cp_resp_upper; /* 0x000060 */
- u64 cp_resp_lower; /* 0x000068 */
- #define cp_resp cp_resp_lower
- u64 cp_tst_pin_ctrl; /* 0x000070 */
- u64 cp_addr_lkerr; /* 0x000078 */
-
- /* 0x000080-0x00008F -- PMU & MAP */
- u64 cp_dir_map; /* 0x000080 */
- u64 _pad_000088; /* 0x000088 */
-
- /* 0x000090-0x00009F -- SSRAM */
- u64 cp_map_fault; /* 0x000090 */
- u64 _pad_000098; /* 0x000098 */
-
- /* 0x0000A0-0x0000AF -- Arbitration */
- u64 cp_arb; /* 0x0000A0 */
- u64 _pad_0000A8; /* 0x0000A8 */
-
- /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
- u64 cp_ate_parity_err; /* 0x0000B0 */
- u64 _pad_0000B8; /* 0x0000B8 */
-
- /* 0x0000C0-0x0000FF -- PCI/GIO */
- u64 cp_bus_timeout; /* 0x0000C0 */
- u64 cp_pci_cfg; /* 0x0000C8 */
- u64 cp_pci_err_upper; /* 0x0000D0 */
- u64 cp_pci_err_lower; /* 0x0000D8 */
- #define cp_pci_err cp_pci_err_lower
- u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */
-
- /* 0x000100-0x0001FF -- Interrupt */
- u64 cp_int_status; /* 0x000100 */
- u64 cp_int_enable; /* 0x000108 */
- u64 cp_int_rst_stat; /* 0x000110 */
- u64 cp_int_mode; /* 0x000118 */
- u64 cp_int_device; /* 0x000120 */
- u64 cp_int_host_err; /* 0x000128 */
- u64 cp_int_addr[8]; /* 0x0001{30,,,68} */
- u64 cp_err_int_view; /* 0x000170 */
- u64 cp_mult_int; /* 0x000178 */
- u64 cp_force_always[8]; /* 0x0001{80,,,B8} */
- u64 cp_force_pin[8]; /* 0x0001{C0,,,F8} */
-
- /* 0x000200-0x000298 -- Device */
- u64 cp_device[4]; /* 0x0002{00,,,18} */
- u64 _pad_000220[4]; /* 0x0002{20,,,38} */
- u64 cp_wr_req_buf[4]; /* 0x0002{40,,,58} */
- u64 _pad_000260[4]; /* 0x0002{60,,,78} */
- u64 cp_rrb_map[2]; /* 0x0002{80,,,88} */
- #define cp_even_resp cp_rrb_map[0] /* 0x000280 */
- #define cp_odd_resp cp_rrb_map[1] /* 0x000288 */
- u64 cp_resp_status; /* 0x000290 */
- u64 cp_resp_clear; /* 0x000298 */
-
- u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */
-
- /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
- struct {
- u64 upper; /* 0x0003{00,,,F0} */
- u64 lower; /* 0x0003{08,,,F8} */
- } cp_buf_addr_match[16];
-
- /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
- struct {
- u64 flush_w_touch; /* 0x000{400,,,5C0} */
- u64 flush_wo_touch; /* 0x000{408,,,5C8} */
- u64 inflight; /* 0x000{410,,,5D0} */
- u64 prefetch; /* 0x000{418,,,5D8} */
- u64 total_pci_retry; /* 0x000{420,,,5E0} */
- u64 max_pci_retry; /* 0x000{428,,,5E8} */
- u64 max_latency; /* 0x000{430,,,5F0} */
- u64 clear_all; /* 0x000{438,,,5F8} */
- } cp_buf_count[8];
-
-
- /* 0x000600-0x0009FF -- PCI/X registers */
- u64 cp_pcix_bus_err_addr; /* 0x000600 */
- u64 cp_pcix_bus_err_attr; /* 0x000608 */
- u64 cp_pcix_bus_err_data; /* 0x000610 */
- u64 cp_pcix_pio_split_addr; /* 0x000618 */
- u64 cp_pcix_pio_split_attr; /* 0x000620 */
- u64 cp_pcix_dma_req_err_attr; /* 0x000628 */
- u64 cp_pcix_dma_req_err_addr; /* 0x000630 */
- u64 cp_pcix_timeout; /* 0x000638 */
-
- u64 _pad_000640[24]; /* 0x000{640,,,6F8} */
-
- /* 0x000700-0x000737 -- Debug Registers */
- u64 cp_ct_debug_ctl; /* 0x000700 */
- u64 cp_br_debug_ctl; /* 0x000708 */
- u64 cp_mux3_debug_ctl; /* 0x000710 */
- u64 cp_mux4_debug_ctl; /* 0x000718 */
- u64 cp_mux5_debug_ctl; /* 0x000720 */
- u64 cp_mux6_debug_ctl; /* 0x000728 */
- u64 cp_mux7_debug_ctl; /* 0x000730 */
-
- u64 _pad_000738[89]; /* 0x000{738,,,9F8} */
-
- /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
- struct {
- u64 cp_buf_addr; /* 0x000{A00,,,AF0} */
- u64 cp_buf_attr; /* 0X000{A08,,,AF8} */
- } cp_pcix_read_buf_64[16];
-
- struct {
- u64 cp_buf_addr; /* 0x000{B00,,,BE0} */
- u64 cp_buf_attr; /* 0x000{B08,,,BE8} */
- u64 cp_buf_valid; /* 0x000{B10,,,BF0} */
- u64 __pad1; /* 0x000{B18,,,BF8} */
- } cp_pcix_write_buf_64[8];
-
- /* End of Local Registers -- Start of Address Map space */
-
- char _pad_000c00[0x010000 - 0x000c00];
-
- /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */
- u64 cp_int_ate_ram[1024]; /* 0x010000-0x011FF8 */
-
- char _pad_012000[0x14000 - 0x012000];
-
- /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */
- u64 cp_int_ate_ram_mp[1024]; /* 0x014000-0x015FF8 */
-
- char _pad_016000[0x18000 - 0x016000];
-
- /* 0x18000-0x197F8 -- TIOCP Write Request Ram */
- u64 cp_wr_req_lower[256]; /* 0x18000 - 0x187F8 */
- u64 cp_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */
- u64 cp_wr_req_parity[256]; /* 0x19000 - 0x197F8 */
-
- char _pad_019800[0x1C000 - 0x019800];
-
- /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */
- u64 cp_rd_resp_lower[512]; /* 0x1C000 - 0x1CFF8 */
- u64 cp_rd_resp_upper[512]; /* 0x1D000 - 0x1DFF8 */
- u64 cp_rd_resp_parity[512]; /* 0x1E000 - 0x1EFF8 */
-
- char _pad_01F000[0x20000 - 0x01F000];
-
- /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used) */
- char _pad_020000[0x021000 - 0x20000];
-
- /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */
- union {
- u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */
- u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */
- u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */
- u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */
- union {
- u8 c[0x100 / 1];
- u16 s[0x100 / 2];
- u32 l[0x100 / 4];
- u64 d[0x100 / 8];
- } f[8];
- } cp_type0_cfg_dev[7]; /* 0x02{1000,,,7FFF} */
-
- /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
- union {
- u8 c[0x1000 / 1]; /* 0x028000-0x029000 */
- u16 s[0x1000 / 2]; /* 0x028000-0x029000 */
- u32 l[0x1000 / 4]; /* 0x028000-0x029000 */
- u64 d[0x1000 / 8]; /* 0x028000-0x029000 */
- union {
- u8 c[0x100 / 1];
- u16 s[0x100 / 2];
- u32 l[0x100 / 4];
- u64 d[0x100 / 8];
- } f[8];
- } cp_type1_cfg; /* 0x028000-0x029000 */
-
- char _pad_029000[0x030000-0x029000];
-
- /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
- union {
- u8 c[8 / 1];
- u16 s[8 / 2];
- u32 l[8 / 4];
- u64 d[8 / 8];
- } cp_pci_iack; /* 0x030000-0x030007 */
-
- char _pad_030007[0x040000-0x030008];
-
- /* 0x040000-0x040007 -- PCIX Special Cycle */
- union {
- u8 c[8 / 1];
- u16 s[8 / 2];
- u32 l[8 / 4];
- u64 d[8 / 8];
- } cp_pcix_cycle; /* 0x040000-0x040007 */
-
- char _pad_040007[0x200000-0x040008];
-
- /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */
- union {
- u8 c[0x100000 / 1];
- u16 s[0x100000 / 2];
- u32 l[0x100000 / 4];
- u64 d[0x100000 / 8];
- } cp_devio_raw[6]; /* 0x200000-0x7FFFFF */
-
- #define cp_devio(n) cp_devio_raw[((n)<2)?(n*2):(n+2)]
-
- char _pad_800000[0xA00000-0x800000];
-
- /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush */
- union {
- u8 c[0x100000 / 1];
- u16 s[0x100000 / 2];
- u32 l[0x100000 / 4];
- u64 d[0x100000 / 8];
- } cp_devio_raw_flush[6]; /* 0xA00000-0xBFFFFF */
-
- #define cp_devio_flush(n) cp_devio_raw_flush[((n)<2)?(n*2):(n+2)]
-
-};
-
-#endif /* _ASM_IA64_SN_PCI_TIOCP_H */
diff --git a/arch/ia64/include/asm/sn/tiocx.h b/arch/ia64/include/asm/sn/tiocx.h
deleted file mode 100644
index d29728492f36..000000000000
--- a/arch/ia64/include/asm/sn/tiocx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_TIO_TIOCX_H
-#define _ASM_IA64_SN_TIO_TIOCX_H
-
-#ifdef __KERNEL__
-
-struct cx_id_s {
- unsigned int part_num;
- unsigned int mfg_num;
- int nasid;
-};
-
-struct cx_dev {
- struct cx_id_s cx_id;
- int bt; /* board/blade type */
- void *soft; /* driver specific */
- struct hubdev_info *hubdev;
- struct device dev;
- struct cx_drv *driver;
-};
-
-struct cx_device_id {
- unsigned int part_num;
- unsigned int mfg_num;
-};
-
-struct cx_drv {
- char *name;
- const struct cx_device_id *id_table;
- struct device_driver driver;
- int (*probe) (struct cx_dev * dev, const struct cx_device_id * id);
- int (*remove) (struct cx_dev * dev);
-};
-
-/* create DMA address by stripping AS bits */
-#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL)
-
-#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) | \
- ((((u64)(a)) & 0xffffc000000000UL) <<2))
-
-#define TIO_CE_ASIC_PARTNUM 0xce00
-#define TIOCX_CORELET 3
-
-/* These are taken from tio_mmr_as.h */
-#define TIO_ICE_FRZ_CFG TIO_MMR_ADDR_MOD(0x00000000b0008100UL)
-#define TIO_ICE_PMI_TX_CFG TIO_MMR_ADDR_MOD(0x00000000b000b100UL)
-#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3 TIO_MMR_ADDR_MOD(0x00000000b000be18UL)
-#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK 0x000000000000000fUL
-
-#define to_cx_dev(n) container_of(n, struct cx_dev, dev)
-#define to_cx_driver(drv) container_of(drv, struct cx_drv, driver)
-
-extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int);
-extern void tiocx_irq_free(struct sn_irq_info *);
-extern int cx_device_unregister(struct cx_dev *);
-extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int);
-extern int cx_driver_unregister(struct cx_drv *);
-extern int cx_driver_register(struct cx_drv *);
-extern u64 tiocx_dma_addr(u64 addr);
-extern u64 tiocx_swin_base(int nasid);
-extern void tiocx_mmr_store(int nasid, u64 offset, u64 value);
-extern u64 tiocx_mmr_load(int nasid, u64 offset);
-
-#endif // __KERNEL__
-#endif // _ASM_IA64_SN_TIO_TIOCX__
diff --git a/arch/ia64/include/asm/sn/types.h b/arch/ia64/include/asm/sn/types.h
deleted file mode 100644
index 8e04ee211e59..000000000000
--- a/arch/ia64/include/asm/sn/types.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc. All Rights Reserved.
- * Copyright (C) 1999 by Ralf Baechle
- */
-#ifndef _ASM_IA64_SN_TYPES_H
-#define _ASM_IA64_SN_TYPES_H
-
-#include <linux/types.h>
-
-typedef unsigned long cpuid_t;
-typedef signed short nasid_t; /* node id in numa-as-id space */
-typedef signed char partid_t; /* partition ID type */
-typedef unsigned int moduleid_t; /* user-visible module number type */
-typedef unsigned int cmoduleid_t; /* kernel compact module id type */
-typedef unsigned char slotid_t; /* slot (blade) within module */
-typedef unsigned char slabid_t; /* slab (asic) within slot */
-typedef u64 nic_t;
-typedef unsigned long iopaddr_t;
-typedef unsigned long paddr_t;
-typedef short cnodeid_t;
-
-#endif /* _ASM_IA64_SN_TYPES_H */