summaryrefslogtreecommitdiff
path: root/arch/ia64
diff options
context:
space:
mode:
authorTony Luck <tony.luck@intel.com>2005-10-31 10:51:57 -0800
committerTony Luck <tony.luck@intel.com>2005-10-31 10:51:57 -0800
commitc7fb577e2a6cb04732541f2dc402bd46747f7558 (patch)
treedf3b1a1922ed13bfbcc45d08650c38beeb1a7bd1 /arch/ia64
parent9cec58dc138d6fcad9f447a19c8ff69f6540e667 (diff)
parent581c1b14394aee60aff46ea67d05483261ed6527 (diff)
manual update from upstream:
Applied Al's change 06a544971fad0992fe8b92c5647538d573089dd4 to new location of swiotlb.c Signed-off-by: Tony Luck <tony.luck@intel.com>
Diffstat (limited to 'arch/ia64')
-rw-r--r--arch/ia64/Kconfig98
-rw-r--r--arch/ia64/configs/bigsur_defconfig395
-rw-r--r--arch/ia64/configs/gensparse_defconfig1319
-rw-r--r--arch/ia64/configs/tiger_defconfig86
-rw-r--r--arch/ia64/configs/zx1_defconfig92
-rw-r--r--arch/ia64/defconfig265
-rw-r--r--arch/ia64/hp/common/hwsw_iommu.c2
-rw-r--r--arch/ia64/hp/common/sba_iommu.c2
-rw-r--r--arch/ia64/hp/sim/simscsi.c13
-rw-r--r--arch/ia64/ia32/sys_ia32.c1
-rw-r--r--arch/ia64/kernel/acpi.c13
-rw-r--r--arch/ia64/kernel/cyclone.c1
-rw-r--r--arch/ia64/kernel/efi.c510
-rw-r--r--arch/ia64/kernel/irq.c12
-rw-r--r--arch/ia64/kernel/mca.c4
-rw-r--r--arch/ia64/kernel/module.c6
-rw-r--r--arch/ia64/kernel/patch.c16
-rw-r--r--arch/ia64/kernel/perfmon.c3
-rw-r--r--arch/ia64/kernel/ptrace.c28
-rw-r--r--arch/ia64/kernel/setup.c63
-rw-r--r--arch/ia64/kernel/smp.c10
-rw-r--r--arch/ia64/kernel/smpboot.c6
-rw-r--r--arch/ia64/kernel/time.c4
-rw-r--r--arch/ia64/kernel/uncached.c17
-rw-r--r--arch/ia64/mm/Makefile5
-rw-r--r--arch/ia64/mm/contig.c4
-rw-r--r--arch/ia64/mm/discontig.c50
-rw-r--r--arch/ia64/mm/fault.c34
-rw-r--r--arch/ia64/mm/init.c15
-rw-r--r--arch/ia64/mm/numa.c24
-rw-r--r--arch/ia64/mm/tlb.c23
-rw-r--r--arch/ia64/pci/pci.c58
-rw-r--r--arch/ia64/sn/kernel/bte.c2
-rw-r--r--arch/ia64/sn/kernel/io_init.c4
-rw-r--r--arch/ia64/sn/kernel/setup.c160
-rw-r--r--arch/ia64/sn/kernel/sn2/sn2_smp.c31
-rw-r--r--arch/ia64/sn/kernel/sn2/sn_hwperf.c4
-rw-r--r--arch/ia64/sn/kernel/tiocx.c67
-rw-r--r--arch/ia64/sn/kernel/xpc.h368
-rw-r--r--arch/ia64/sn/kernel/xpc_channel.c329
-rw-r--r--arch/ia64/sn/kernel/xpc_main.c330
-rw-r--r--arch/ia64/sn/kernel/xpc_partition.c475
-rw-r--r--arch/ia64/sn/pci/pci_dma.c48
-rw-r--r--arch/ia64/sn/pci/pcibr/pcibr_reg.c59
-rw-r--r--arch/ia64/sn/pci/tioca_provider.c32
-rw-r--r--arch/ia64/sn/pci/tioce_provider.c30
46 files changed, 3882 insertions, 1236 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 8f699a2e7981..3b4248cff9a7 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -67,8 +67,6 @@ config IA64_GENERIC
select ACPI
select NUMA
select ACPI_NUMA
- select VIRTUAL_MEM_MAP
- select DISCONTIGMEM
help
This selects the system type of your hardware. A "generic" kernel
will run on any supported IA-64 system. However, if you configure
@@ -180,40 +178,6 @@ config IA64_L1_CACHE_SHIFT
default "6" if ITANIUM
# align cache-sensitive data to 64 bytes
-config NUMA
- bool "NUMA support"
- depends on !IA64_HP_SIM
- default y if IA64_SGI_SN2
- select ACPI_NUMA
- help
- Say Y to compile the kernel to support NUMA (Non-Uniform Memory
- Access). This option is for configuring high-end multiprocessor
- server systems. If in doubt, say N.
-
-config VIRTUAL_MEM_MAP
- bool "Virtual mem map"
- default y if !IA64_HP_SIM
- help
- Say Y to compile the kernel with support for a virtual mem map.
- This code also only takes effect if a memory hole of greater than
- 1 Gb is found during boot. You must turn this option on if you
- require the DISCONTIGMEM option for your machine. If you are
- unsure, say Y.
-
-config HOLES_IN_ZONE
- bool
- default y if VIRTUAL_MEM_MAP
-
-config ARCH_DISCONTIGMEM_ENABLE
- bool "Discontiguous memory support"
- depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
- default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
- help
- Say Y to support efficient handling of discontiguous physical memory,
- for architectures which are either NUMA (Non-Uniform Memory Access)
- or have huge holes in the physical address space for other reasons.
- See <file:Documentation/vm/numa> for more.
-
config IA64_CYCLONE
bool "Cyclone (EXA) Time Source support"
help
@@ -236,8 +200,10 @@ config IA64_SGI_SN_XP
based on a network adapter and DMA messaging.
config FORCE_MAX_ZONEORDER
- int
- default "18"
+ int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
+ range 11 17 if !HUGETLB_PAGE
+ default "17" if HUGETLB_PAGE
+ default "11"
config SMP
bool "Symmetric multi-processing support"
@@ -258,8 +224,8 @@ config SMP
If you don't know what to do here, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-512)"
- range 2 512
+ int "Maximum number of CPUs (2-1024)"
+ range 2 1024
depends on SMP
default "64"
help
@@ -302,6 +268,58 @@ config PREEMPT
source "mm/Kconfig"
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+ help
+ Say Y to support efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config NUMA
+ bool "NUMA support"
+ depends on !IA64_HP_SIM && !FLATMEM
+ default y if IA64_SGI_SN2
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option is for configuring high-end multiprocessor
+ server systems. If in doubt, say N.
+
+# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
+# VIRTUAL_MEM_MAP has been retained for historical reasons.
+config VIRTUAL_MEM_MAP
+ bool "Virtual mem map"
+ depends on !SPARSEMEM
+ default y if !IA64_HP_SIM
+ help
+ Say Y to compile the kernel with support for a virtual mem map.
+ This code also only takes effect if a memory hole of greater than
+ 1 Gb is found during boot. You must turn this option on if you
+ require the DISCONTIGMEM option for your machine. If you are
+ unsure, say Y.
+
+config HOLES_IN_ZONE
+ bool
+ default y if VIRTUAL_MEM_MAP
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ def_bool y
+ depends on NEED_MULTIPLE_NODES
+
config IA32_SUPPORT
bool "Support for Linux/x86 binaries"
help
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 3b65cbb31b1d..b40672bb3ab0 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Mon Nov 29 13:27:48 2004
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:18:49 2005
#
#
@@ -10,34 +10,40 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -58,12 +64,15 @@ CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
CONFIG_ITANIUM=y
@@ -72,17 +81,30 @@ CONFIG_ITANIUM=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
# CONFIG_NUMA is not set
# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@@ -95,6 +117,7 @@ CONFIG_IA64_PALINFO=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -102,18 +125,26 @@ CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
@@ -122,7 +153,7 @@ CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
@@ -135,8 +166,70 @@ CONFIG_PCI_NAMES=y
# CONFIG_PCCARD is not set
#
-# PC-card bridges
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -151,6 +244,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -163,7 +261,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
@@ -172,14 +276,15 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -189,6 +294,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -211,7 +317,8 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=m
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
@@ -233,6 +340,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -250,6 +358,7 @@ CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -261,6 +370,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -274,6 +384,8 @@ CONFIG_SCSI_LOGGING=y
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -288,18 +400,13 @@ CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
@@ -309,7 +416,8 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -332,11 +440,14 @@ CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
@@ -349,72 +460,14 @@ CONFIG_DM_ZERO=m
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
@@ -422,6 +475,11 @@ CONFIG_DUMMY=y
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -443,7 +501,6 @@ CONFIG_NET_PCI=y
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -465,13 +522,17 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -496,6 +557,8 @@ CONFIG_EEPRO100=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -525,18 +588,6 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -554,6 +605,17 @@ CONFIG_MOUSE_PS2=y
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -571,7 +633,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -579,6 +640,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -603,14 +665,22 @@ CONFIG_EFI_RTC=y
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
-CONFIG_DRM=y
+CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -635,7 +705,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@@ -651,16 +721,43 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PCA_ISA is not set
#
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
#
-# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
@@ -671,33 +768,26 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
+# Misc devices
#
-# CONFIG_W1 is not set
#
-# Misc devices
+# Multimedia Capabilities Port drivers
#
#
@@ -752,11 +842,12 @@ CONFIG_SND_OPL3_LIB=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -768,6 +859,8 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS4281=m
# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
@@ -775,9 +868,10 @@ CONFIG_SND_CS4281=m
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
@@ -791,13 +885,14 @@ CONFIG_SND_CS4281=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
@@ -807,6 +902,8 @@ CONFIG_SND_CS4281=m
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
@@ -818,35 +915,38 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-CONFIG_USB_AUDIO=m
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_BLUETOOTH_TTY=m
-CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@@ -863,19 +963,23 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
@@ -894,6 +998,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -909,7 +1014,6 @@ CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
@@ -918,10 +1022,12 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -930,10 +1036,25 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_GADGET is not set
#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -945,17 +1066,20 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -982,14 +1106,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1013,15 +1134,18 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -1031,9 +1155,11 @@ CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1103,8 +1229,12 @@ CONFIG_NLS_UTF8=m
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
@@ -1115,14 +1245,20 @@ CONFIG_OPROFILE=y
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
# CONFIG_IA64_GRANULE_16MB is not set
CONFIG_IA64_GRANULE_64MB=y
# CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1149,6 +1285,7 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
@@ -1164,3 +1301,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
new file mode 100644
index 000000000000..80f8663bc6d9
--- /dev/null
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -0,0 +1,1319 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Wed Sep 28 08:27:29 2005
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_GENERIC=y
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
+CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_SMP=y
+CONFIG_NR_CPUS=512
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_SCHED_SMT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SGIIOC4=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+CONFIG_SCSI_SATA_VITESSE=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=m
+CONFIG_E100=m
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_MBCS=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+# CONFIG_HPET_RTC_IRQ is not set
+CONFIG_HPET_MMAP=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_MMTIMER=y
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS4281=m
+CONFIG_SND_EMU10K1=m
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+CONFIG_SND_FM801=m
+# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_MTHCA=m
+# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+
+#
+# SN Devices
+#
+CONFIG_SGI_IOC4=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index d452e18ac494..9bc8bcafc905 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6-tiger-smp
-# Wed Aug 17 10:19:51 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:17:57 2005
#
#
@@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
@@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -122,20 +126,27 @@ CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
-# CONFIG_ACPI_HOTPLUG_CPU is not set
+CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
@@ -144,7 +155,6 @@ CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -188,14 +198,19 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -218,9 +233,11 @@ CONFIG_TCP_CONG_BIC=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -235,6 +252,11 @@ CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -247,7 +269,13 @@ CONFIG_FW_LOADER=m
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
@@ -266,7 +294,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -299,7 +326,8 @@ CONFIG_BLK_DEV_IDESCSI=m
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
@@ -339,6 +367,7 @@ CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -366,6 +395,7 @@ CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -454,6 +484,7 @@ CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
@@ -461,6 +492,11 @@ CONFIG_DUMMY=m
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -481,6 +517,7 @@ CONFIG_TULIP=m
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
@@ -512,6 +549,7 @@ CONFIG_E1000=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -521,6 +559,7 @@ CONFIG_TIGON3=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -618,6 +657,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
@@ -675,6 +715,7 @@ CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
@@ -691,7 +732,6 @@ CONFIG_MAX_RAW_DEVS=256
# I2C support
#
# CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
@@ -702,6 +742,7 @@ CONFIG_MAX_RAW_DEVS=256
# Hardware Monitoring support
#
CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -709,6 +750,10 @@ CONFIG_HWMON=y
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -800,9 +845,11 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -902,16 +949,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -919,6 +962,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -947,13 +991,11 @@ CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1003,6 +1045,7 @@ CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1072,10 +1115,12 @@ CONFIG_NLS_UTF8=m
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
@@ -1089,6 +1134,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 80b0e9eb7fb3..0856ca67dd50 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Wed Aug 17 10:02:43 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:15:01 2005
#
#
@@ -18,6 +18,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -29,6 +30,7 @@ CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
@@ -122,28 +126,34 @@ CONFIG_BINFMT_MISC=y
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -187,8 +197,8 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
@@ -204,7 +214,6 @@ CONFIG_NETFILTER=y
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
@@ -212,6 +221,11 @@ CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARP_MANGLE is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -234,9 +248,11 @@ CONFIG_IP_NF_ARPTABLES=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -251,6 +267,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -263,7 +284,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
@@ -282,7 +309,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -315,7 +341,8 @@ CONFIG_BLK_DEV_IDECD=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
@@ -354,6 +381,7 @@ CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -381,6 +409,7 @@ CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -457,6 +486,7 @@ CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
@@ -464,6 +494,11 @@ CONFIG_DUMMY=y
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -485,6 +520,7 @@ CONFIG_TULIP_NAPI_HW_MITIGATION=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
@@ -516,6 +552,7 @@ CONFIG_E1000=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -525,6 +562,7 @@ CONFIG_TIGON3=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -650,12 +688,12 @@ CONFIG_AGP=y
CONFIG_AGP_HP_ZX1=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
@@ -689,7 +727,6 @@ CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@@ -703,7 +740,6 @@ CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
#
# Miscellaneous I2C Chip support
@@ -730,12 +766,17 @@ CONFIG_I2C_ALGOPCF=y
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
@@ -806,6 +847,7 @@ CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_S1D13XXX is not set
@@ -862,11 +904,12 @@ CONFIG_SND_OPL3_LIB=y
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -890,7 +933,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
@@ -952,9 +995,8 @@ CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
@@ -971,6 +1013,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
@@ -987,9 +1030,11 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -1088,10 +1133,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -1100,6 +1141,7 @@ CONFIG_FS_MBCACHE=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -1126,13 +1168,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1177,6 +1217,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1246,10 +1287,12 @@ CONFIG_NLS_UTF8=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
@@ -1263,6 +1306,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 5da208115ea1..6e3f147e03e5 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Tue Jun 21 11:30:42 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:13:03 2005
#
#
@@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
@@ -80,6 +82,10 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_NUMA=y
CONFIG_VIRTUAL_MEM_MAP=y
@@ -87,12 +93,21 @@ CONFIG_HOLES_IN_ZONE=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
@@ -105,6 +120,7 @@ CONFIG_IA64_PALINFO=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -112,30 +128,36 @@ CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -147,6 +169,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -154,6 +177,73 @@ CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_PCCARD is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -162,10 +252,15 @@ CONFIG_HOTPLUG_PCI_ACPI=m
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -178,7 +273,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
@@ -197,7 +298,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -230,7 +330,8 @@ CONFIG_BLK_DEV_IDESCSI=m
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
@@ -252,6 +353,7 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -270,6 +372,7 @@ CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -297,6 +400,7 @@ CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -314,6 +418,7 @@ CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
@@ -335,7 +440,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -344,6 +448,7 @@ CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -390,74 +495,14 @@ CONFIG_FUSION_MAX_SGE=128
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
+# Network device support
#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
@@ -465,6 +510,11 @@ CONFIG_DUMMY=m
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -485,6 +535,7 @@ CONFIG_TULIP=m
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
@@ -516,6 +567,7 @@ CONFIG_E1000=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -525,6 +577,7 @@ CONFIG_TIGON3=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -549,6 +602,10 @@ CONFIG_TIGON3=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@@ -607,9 +664,7 @@ CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
#
# Character devices
@@ -620,6 +675,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
@@ -641,7 +697,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -650,8 +705,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
-CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -684,6 +739,8 @@ CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
@@ -708,10 +765,21 @@ CONFIG_MMTIMER=y
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -753,6 +821,7 @@ CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@@ -764,11 +833,12 @@ CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -790,9 +860,10 @@ CONFIG_SND_EMU10K1=m
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
@@ -844,6 +915,7 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -853,9 +925,8 @@ CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
@@ -888,12 +959,17 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -918,7 +994,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -944,10 +1020,11 @@ CONFIG_USB_MON=m
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -964,6 +1041,8 @@ CONFIG_USB_MON=m
# InfiniBand support
#
CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
@@ -981,6 +1060,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -996,22 +1076,20 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -1040,14 +1118,11 @@ CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1071,15 +1146,18 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -1094,6 +1172,7 @@ CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1163,10 +1242,12 @@ CONFIG_NLS_UTF8=m
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# HP Simulator drivers
@@ -1187,6 +1268,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1194,6 +1276,7 @@ CONFIG_LOG_BUF_SHIFT=20
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1215,7 +1298,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 317c334c5a18..a5a5637507be 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -80,7 +80,7 @@ hwsw_init (void)
}
void *
-hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
{
if (use_swiotlb(dev))
return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index e64ca04ace89..bdccd0b1eb60 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1076,7 +1076,7 @@ void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, int dir)
* See Documentation/DMA-mapping.txt
*/
void *
-sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
{
struct ioc *ioc;
void *addr;
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index a18983a3c934..a3fe97531134 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -205,10 +205,11 @@ simscsi_get_disk_size (int fd)
char buf[512];
/*
- * This is a bit kludgey: the simulator doesn't provide a direct way of determining
- * the disk size, so we do a binary search, assuming a maximum disk size of 4GB.
+ * This is a bit kludgey: the simulator doesn't provide a
+ * direct way of determining the disk size, so we do a binary
+ * search, assuming a maximum disk size of 128GB.
*/
- for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) {
+ for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
req.addr = __pa(&buf);
req.len = sizeof(buf);
ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
@@ -225,8 +226,10 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
{
unsigned long offset;
- offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16)
- | (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512;
+ offset = (((unsigned long)sc->cmnd[2] << 24)
+ | ((unsigned long)sc->cmnd[3] << 16)
+ | ((unsigned long)sc->cmnd[4] << 8)
+ | ((unsigned long)sc->cmnd[5] << 0))*512UL;
if (sc->use_sg > 0)
simscsi_sg_readwrite(sc, mode, offset);
else
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 3fa67ecebc83..dc282710421a 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -36,6 +36,7 @@
#include <linux/uio.h>
#include <linux/nfs_fs.h>
#include <linux/quota.h>
+#include <linux/syscalls.h>
#include <linux/sunrpc/svc.h>
#include <linux/nfsd/nfsd.h>
#include <linux/nfsd/cache.h>
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 7e926471e4ec..9ad94ddf6687 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -838,7 +838,7 @@ EXPORT_SYMBOL(acpi_unmap_lsapic);
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
#ifdef CONFIG_ACPI_NUMA
-acpi_status __devinit
+static acpi_status __devinit
acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -890,7 +890,16 @@ acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
map_iosapic_to_node(gsi_base, node);
return AE_OK;
}
-#endif /* CONFIG_NUMA */
+
+static int __init
+acpi_map_iosapics (void)
+{
+ acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
+ return 0;
+}
+
+fs_initcall(acpi_map_iosapics);
+#endif /* CONFIG_ACPI_NUMA */
int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
{
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index 768c7e46957c..6ade3790ce07 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -2,6 +2,7 @@
#include <linux/smp.h>
#include <linux/time.h>
#include <linux/errno.h>
+#include <linux/timex.h>
#include <asm/io.h>
/* IBM Summit (EXA) Cyclone counter code*/
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 179f230816ed..f72ea6aebcb1 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -239,57 +239,30 @@ is_available_memory (efi_memory_desc_t *md)
return 0;
}
-/*
- * Trim descriptor MD so its starts at address START_ADDR. If the descriptor covers
- * memory that is normally available to the kernel, issue a warning that some memory
- * is being ignored.
- */
-static void
-trim_bottom (efi_memory_desc_t *md, u64 start_addr)
-{
- u64 num_skipped_pages;
+typedef struct kern_memdesc {
+ u64 attribute;
+ u64 start;
+ u64 num_pages;
+} kern_memdesc_t;
- if (md->phys_addr >= start_addr || !md->num_pages)
- return;
-
- num_skipped_pages = (start_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
- if (num_skipped_pages > md->num_pages)
- num_skipped_pages = md->num_pages;
-
- if (is_available_memory(md))
- printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
- "at 0x%lx\n", __FUNCTION__,
- (num_skipped_pages << EFI_PAGE_SHIFT) >> 10,
- md->phys_addr, start_addr - IA64_GRANULE_SIZE);
- /*
- * NOTE: Don't set md->phys_addr to START_ADDR because that could cause the memory
- * descriptor list to become unsorted. In such a case, md->num_pages will be
- * zero, so the Right Thing will happen.
- */
- md->phys_addr += num_skipped_pages << EFI_PAGE_SHIFT;
- md->num_pages -= num_skipped_pages;
-}
+static kern_memdesc_t *kern_memmap;
static void
-trim_top (efi_memory_desc_t *md, u64 end_addr)
+walk (efi_freemem_callback_t callback, void *arg, u64 attr)
{
- u64 num_dropped_pages, md_end_addr;
-
- md_end_addr = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
-
- if (md_end_addr <= end_addr || !md->num_pages)
- return;
+ kern_memdesc_t *k;
+ u64 start, end, voff;
- num_dropped_pages = (md_end_addr - end_addr) >> EFI_PAGE_SHIFT;
- if (num_dropped_pages > md->num_pages)
- num_dropped_pages = md->num_pages;
-
- if (is_available_memory(md))
- printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
- "at 0x%lx\n", __FUNCTION__,
- (num_dropped_pages << EFI_PAGE_SHIFT) >> 10,
- md->phys_addr, end_addr);
- md->num_pages -= num_dropped_pages;
+ voff = (attr == EFI_MEMORY_WB) ? PAGE_OFFSET : __IA64_UNCACHED_OFFSET;
+ for (k = kern_memmap; k->start != ~0UL; k++) {
+ if (k->attribute != attr)
+ continue;
+ start = PAGE_ALIGN(k->start);
+ end = (k->start + (k->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK;
+ if (start < end)
+ if ((*callback)(start + voff, end + voff, arg) < 0)
+ return;
+ }
}
/*
@@ -299,148 +272,19 @@ trim_top (efi_memory_desc_t *md, u64 end_addr)
void
efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
{
- int prev_valid = 0;
- struct range {
- u64 start;
- u64 end;
- } prev, curr;
- void *efi_map_start, *efi_map_end, *p, *q;
- efi_memory_desc_t *md, *check_md;
- u64 efi_desc_size, start, end, granule_addr, last_granule_addr, first_non_wb_addr = 0;
- unsigned long total_mem = 0;
-
- efi_map_start = __va(ia64_boot_param->efi_memmap);
- efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
- efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
- for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
- md = p;
-
- /* skip over non-WB memory descriptors; that's all we're interested in... */
- if (!(md->attribute & EFI_MEMORY_WB))
- continue;
-
- /*
- * granule_addr is the base of md's first granule.
- * [granule_addr - first_non_wb_addr) is guaranteed to
- * be contiguous WB memory.
- */
- granule_addr = GRANULEROUNDDOWN(md->phys_addr);
- first_non_wb_addr = max(first_non_wb_addr, granule_addr);
-
- if (first_non_wb_addr < md->phys_addr) {
- trim_bottom(md, granule_addr + IA64_GRANULE_SIZE);
- granule_addr = GRANULEROUNDDOWN(md->phys_addr);
- first_non_wb_addr = max(first_non_wb_addr, granule_addr);
- }
-
- for (q = p; q < efi_map_end; q += efi_desc_size) {
- check_md = q;
-
- if ((check_md->attribute & EFI_MEMORY_WB) &&
- (check_md->phys_addr == first_non_wb_addr))
- first_non_wb_addr += check_md->num_pages << EFI_PAGE_SHIFT;
- else
- break; /* non-WB or hole */
- }
-
- last_granule_addr = GRANULEROUNDDOWN(first_non_wb_addr);
- if (last_granule_addr < md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT))
- trim_top(md, last_granule_addr);
-
- if (is_available_memory(md)) {
- if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) >= max_addr) {
- if (md->phys_addr >= max_addr)
- continue;
- md->num_pages = (max_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
- first_non_wb_addr = max_addr;
- }
-
- if (total_mem >= mem_limit)
- continue;
-
- if (total_mem + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {
- unsigned long limit_addr = md->phys_addr;
-
- limit_addr += mem_limit - total_mem;
- limit_addr = GRANULEROUNDDOWN(limit_addr);
-
- if (md->phys_addr > limit_addr)
- continue;
-
- md->num_pages = (limit_addr - md->phys_addr) >>
- EFI_PAGE_SHIFT;
- first_non_wb_addr = max_addr = md->phys_addr +
- (md->num_pages << EFI_PAGE_SHIFT);
- }
- total_mem += (md->num_pages << EFI_PAGE_SHIFT);
-
- if (md->num_pages == 0)
- continue;
-
- curr.start = PAGE_OFFSET + md->phys_addr;
- curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT);
-
- if (!prev_valid) {
- prev = curr;
- prev_valid = 1;
- } else {
- if (curr.start < prev.start)
- printk(KERN_ERR "Oops: EFI memory table not ordered!\n");
-
- if (prev.end == curr.start) {
- /* merge two consecutive memory ranges */
- prev.end = curr.end;
- } else {
- start = PAGE_ALIGN(prev.start);
- end = prev.end & PAGE_MASK;
- if ((end > start) && (*callback)(start, end, arg) < 0)
- return;
- prev = curr;
- }
- }
- }
- }
- if (prev_valid) {
- start = PAGE_ALIGN(prev.start);
- end = prev.end & PAGE_MASK;
- if (end > start)
- (*callback)(start, end, arg);
- }
+ walk(callback, arg, EFI_MEMORY_WB);
}
/*
- * Walk the EFI memory map to pull out leftover pages in the lower
- * memory regions which do not end up in the regular memory map and
- * stick them into the uncached allocator
- *
- * The regular walk function is significantly more complex than the
- * uncached walk which means it really doesn't make sense to try and
- * marge the two.
+ * Walks the EFI memory map and calls CALLBACK once for each EFI memory descriptor that
+ * has memory that is available for uncached allocator.
*/
-void __init
-efi_memmap_walk_uc (efi_freemem_callback_t callback)
+void
+efi_memmap_walk_uc (efi_freemem_callback_t callback, void *arg)
{
- void *efi_map_start, *efi_map_end, *p;
- efi_memory_desc_t *md;
- u64 efi_desc_size, start, end;
-
- efi_map_start = __va(ia64_boot_param->efi_memmap);
- efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
- efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
- for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
- md = p;
- if (md->attribute == EFI_MEMORY_UC) {
- start = PAGE_ALIGN(md->phys_addr);
- end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK);
- if ((*callback)(start, end, NULL) < 0)
- return;
- }
- }
+ walk(callback, arg, EFI_MEMORY_UC);
}
-
/*
* Look for the PAL_CODE region reported by EFI and maps it using an
* ITR to enable safe PAL calls in virtual mode. See IA-64 Processor
@@ -862,3 +706,307 @@ efi_uart_console_only(void)
printk(KERN_ERR "Malformed %s value\n", name);
return 0;
}
+
+#define efi_md_size(md) (md->num_pages << EFI_PAGE_SHIFT)
+
+static inline u64
+kmd_end(kern_memdesc_t *kmd)
+{
+ return (kmd->start + (kmd->num_pages << EFI_PAGE_SHIFT));
+}
+
+static inline u64
+efi_md_end(efi_memory_desc_t *md)
+{
+ return (md->phys_addr + efi_md_size(md));
+}
+
+static inline int
+efi_wb(efi_memory_desc_t *md)
+{
+ return (md->attribute & EFI_MEMORY_WB);
+}
+
+static inline int
+efi_uc(efi_memory_desc_t *md)
+{
+ return (md->attribute & EFI_MEMORY_UC);
+}
+
+/*
+ * Look for the first granule aligned memory descriptor memory
+ * that is big enough to hold EFI memory map. Make sure this
+ * descriptor is atleast granule sized so it does not get trimmed
+ */
+struct kern_memdesc *
+find_memmap_space (void)
+{
+ u64 contig_low=0, contig_high=0;
+ u64 as = 0, ae;
+ void *efi_map_start, *efi_map_end, *p, *q;
+ efi_memory_desc_t *md, *pmd = NULL, *check_md;
+ u64 space_needed, efi_desc_size;
+ unsigned long total_mem = 0;
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ /*
+ * Worst case: we need 3 kernel descriptors for each efi descriptor
+ * (if every entry has a WB part in the middle, and UC head and tail),
+ * plus one for the end marker.
+ */
+ space_needed = sizeof(kern_memdesc_t) *
+ (3 * (ia64_boot_param->efi_memmap_size/efi_desc_size) + 1);
+
+ for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+ md = p;
+ if (!efi_wb(md)) {
+ continue;
+ }
+ if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+ contig_low = GRANULEROUNDUP(md->phys_addr);
+ contig_high = efi_md_end(md);
+ for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+ check_md = q;
+ if (!efi_wb(check_md))
+ break;
+ if (contig_high != check_md->phys_addr)
+ break;
+ contig_high = efi_md_end(check_md);
+ }
+ contig_high = GRANULEROUNDDOWN(contig_high);
+ }
+ if (!is_available_memory(md) || md->type == EFI_LOADER_DATA)
+ continue;
+
+ /* Round ends inward to granule boundaries */
+ as = max(contig_low, md->phys_addr);
+ ae = min(contig_high, efi_md_end(md));
+
+ /* keep within max_addr= command line arg */
+ ae = min(ae, max_addr);
+ if (ae <= as)
+ continue;
+
+ /* avoid going over mem= command line arg */
+ if (total_mem + (ae - as) > mem_limit)
+ ae -= total_mem + (ae - as) - mem_limit;
+
+ if (ae <= as)
+ continue;
+
+ if (ae - as > space_needed)
+ break;
+ }
+ if (p >= efi_map_end)
+ panic("Can't allocate space for kernel memory descriptors");
+
+ return __va(as);
+}
+
+/*
+ * Walk the EFI memory map and gather all memory available for kernel
+ * to use. We can allocate partial granules only if the unavailable
+ * parts exist, and are WB.
+ */
+void
+efi_memmap_init(unsigned long *s, unsigned long *e)
+{
+ struct kern_memdesc *k, *prev = 0;
+ u64 contig_low=0, contig_high=0;
+ u64 as, ae, lim;
+ void *efi_map_start, *efi_map_end, *p, *q;
+ efi_memory_desc_t *md, *pmd = NULL, *check_md;
+ u64 efi_desc_size;
+ unsigned long total_mem = 0;
+
+ k = kern_memmap = find_memmap_space();
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+ md = p;
+ if (!efi_wb(md)) {
+ if (efi_uc(md) && (md->type == EFI_CONVENTIONAL_MEMORY ||
+ md->type == EFI_BOOT_SERVICES_DATA)) {
+ k->attribute = EFI_MEMORY_UC;
+ k->start = md->phys_addr;
+ k->num_pages = md->num_pages;
+ k++;
+ }
+ continue;
+ }
+ if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+ contig_low = GRANULEROUNDUP(md->phys_addr);
+ contig_high = efi_md_end(md);
+ for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+ check_md = q;
+ if (!efi_wb(check_md))
+ break;
+ if (contig_high != check_md->phys_addr)
+ break;
+ contig_high = efi_md_end(check_md);
+ }
+ contig_high = GRANULEROUNDDOWN(contig_high);
+ }
+ if (!is_available_memory(md))
+ continue;
+
+ /*
+ * Round ends inward to granule boundaries
+ * Give trimmings to uncached allocator
+ */
+ if (md->phys_addr < contig_low) {
+ lim = min(efi_md_end(md), contig_low);
+ if (efi_uc(md)) {
+ if (k > kern_memmap && (k-1)->attribute == EFI_MEMORY_UC &&
+ kmd_end(k-1) == md->phys_addr) {
+ (k-1)->num_pages += (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+ } else {
+ k->attribute = EFI_MEMORY_UC;
+ k->start = md->phys_addr;
+ k->num_pages = (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+ k++;
+ }
+ }
+ as = contig_low;
+ } else
+ as = md->phys_addr;
+
+ if (efi_md_end(md) > contig_high) {
+ lim = max(md->phys_addr, contig_high);
+ if (efi_uc(md)) {
+ if (lim == md->phys_addr && k > kern_memmap &&
+ (k-1)->attribute == EFI_MEMORY_UC &&
+ kmd_end(k-1) == md->phys_addr) {
+ (k-1)->num_pages += md->num_pages;
+ } else {
+ k->attribute = EFI_MEMORY_UC;
+ k->start = lim;
+ k->num_pages = (efi_md_end(md) - lim) >> EFI_PAGE_SHIFT;
+ k++;
+ }
+ }
+ ae = contig_high;
+ } else
+ ae = efi_md_end(md);
+
+ /* keep within max_addr= command line arg */
+ ae = min(ae, max_addr);
+ if (ae <= as)
+ continue;
+
+ /* avoid going over mem= command line arg */
+ if (total_mem + (ae - as) > mem_limit)
+ ae -= total_mem + (ae - as) - mem_limit;
+
+ if (ae <= as)
+ continue;
+ if (prev && kmd_end(prev) == md->phys_addr) {
+ prev->num_pages += (ae - as) >> EFI_PAGE_SHIFT;
+ total_mem += ae - as;
+ continue;
+ }
+ k->attribute = EFI_MEMORY_WB;
+ k->start = as;
+ k->num_pages = (ae - as) >> EFI_PAGE_SHIFT;
+ total_mem += ae - as;
+ prev = k++;
+ }
+ k->start = ~0L; /* end-marker */
+
+ /* reserve the memory we are using for kern_memmap */
+ *s = (u64)kern_memmap;
+ *e = (u64)++k;
+}
+
+void
+efi_initialize_iomem_resources(struct resource *code_resource,
+ struct resource *data_resource)
+{
+ struct resource *res;
+ void *efi_map_start, *efi_map_end, *p;
+ efi_memory_desc_t *md;
+ u64 efi_desc_size;
+ char *name;
+ unsigned long flags;
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ res = NULL;
+
+ for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
+ md = p;
+
+ if (md->num_pages == 0) /* should not happen */
+ continue;
+
+ flags = IORESOURCE_MEM;
+ switch (md->type) {
+
+ case EFI_MEMORY_MAPPED_IO:
+ case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+ continue;
+
+ case EFI_LOADER_CODE:
+ case EFI_LOADER_DATA:
+ case EFI_BOOT_SERVICES_DATA:
+ case EFI_BOOT_SERVICES_CODE:
+ case EFI_CONVENTIONAL_MEMORY:
+ if (md->attribute & EFI_MEMORY_WP) {
+ name = "System ROM";
+ flags |= IORESOURCE_READONLY;
+ } else {
+ name = "System RAM";
+ }
+ break;
+
+ case EFI_ACPI_MEMORY_NVS:
+ name = "ACPI Non-volatile Storage";
+ flags |= IORESOURCE_BUSY;
+ break;
+
+ case EFI_UNUSABLE_MEMORY:
+ name = "reserved";
+ flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED;
+ break;
+
+ case EFI_RESERVED_TYPE:
+ case EFI_RUNTIME_SERVICES_CODE:
+ case EFI_RUNTIME_SERVICES_DATA:
+ case EFI_ACPI_RECLAIM_MEMORY:
+ default:
+ name = "reserved";
+ flags |= IORESOURCE_BUSY;
+ break;
+ }
+
+ if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) {
+ printk(KERN_ERR "failed to alocate resource for iomem\n");
+ return;
+ }
+
+ res->name = name;
+ res->start = md->phys_addr;
+ res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+ res->flags = flags;
+
+ if (insert_resource(&iomem_resource, res) < 0)
+ kfree(res);
+ else {
+ /*
+ * We don't know which region contains
+ * kernel data so we try it repeatedly and
+ * let the resource manager test it.
+ */
+ insert_resource(res, code_resource);
+ insert_resource(res, data_resource);
+ }
+ }
+}
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 205d98028261..d33244c32759 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -57,9 +57,9 @@ int show_interrupts(struct seq_file *p, void *v)
if (i == 0) {
seq_printf(p, " ");
- for (j=0; j<NR_CPUS; j++)
- if (cpu_online(j))
- seq_printf(p, "CPU%d ",j);
+ for_each_online_cpu(j) {
+ seq_printf(p, "CPU%d ",j);
+ }
seq_putc(p, '\n');
}
@@ -72,9 +72,9 @@ int show_interrupts(struct seq_file *p, void *v)
#ifndef CONFIG_SMP
seq_printf(p, "%10u ", kstat_irqs(i));
#else
- for (j = 0; j < NR_CPUS; j++)
- if (cpu_online(j))
- seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+ for_each_online_cpu(j) {
+ seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+ }
#endif
seq_printf(p, " %14s", irq_desc[i].handler->typename);
seq_printf(p, " %s", action->name);
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index d0a5106fba24..52c47da17246 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -508,9 +508,7 @@ ia64_mca_wakeup_all(void)
int cpu;
/* Clear the Rendez checkin flag for all cpus */
- for(cpu = 0; cpu < NR_CPUS; cpu++) {
- if (!cpu_online(cpu))
- continue;
+ for_each_online_cpu(cpu) {
if (ia64_mc_info.imi_rendez_checkin[cpu] == IA64_MCA_RENDEZ_CHECKIN_DONE)
ia64_mca_wakeup(cpu);
}
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index f1aca7cffd12..7a2f0a798d12 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -947,8 +947,8 @@ void
percpu_modcopy (void *pcpudst, const void *src, unsigned long size)
{
unsigned int i;
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_possible(i))
- memcpy(pcpudst + __per_cpu_offset[i], src, size);
+ for_each_cpu(i) {
+ memcpy(pcpudst + __per_cpu_offset[i], src, size);
+ }
}
#endif /* CONFIG_SMP */
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index 367804a605fa..6a4ac7d70b35 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -64,22 +64,30 @@ ia64_patch (u64 insn_addr, u64 mask, u64 val)
void
ia64_patch_imm64 (u64 insn_addr, u64 val)
{
- ia64_patch(insn_addr,
+ /* The assembler may generate offset pointing to either slot 1
+ or slot 2 for a long (2-slot) instruction, occupying slots 1
+ and 2. */
+ insn_addr &= -16UL;
+ ia64_patch(insn_addr + 2,
0x01fffefe000UL, ( ((val & 0x8000000000000000UL) >> 27) /* bit 63 -> 36 */
| ((val & 0x0000000000200000UL) << 0) /* bit 21 -> 21 */
| ((val & 0x00000000001f0000UL) << 6) /* bit 16 -> 22 */
| ((val & 0x000000000000ff80UL) << 20) /* bit 7 -> 27 */
| ((val & 0x000000000000007fUL) << 13) /* bit 0 -> 13 */));
- ia64_patch(insn_addr - 1, 0x1ffffffffffUL, val >> 22);
+ ia64_patch(insn_addr + 1, 0x1ffffffffffUL, val >> 22);
}
void
ia64_patch_imm60 (u64 insn_addr, u64 val)
{
- ia64_patch(insn_addr,
+ /* The assembler may generate offset pointing to either slot 1
+ or slot 2 for a long (2-slot) instruction, occupying slots 1
+ and 2. */
+ insn_addr &= -16UL;
+ ia64_patch(insn_addr + 2,
0x011ffffe000UL, ( ((val & 0x0800000000000000UL) >> 23) /* bit 59 -> 36 */
| ((val & 0x00000000000fffffUL) << 13) /* bit 0 -> 13 */));
- ia64_patch(insn_addr - 1, 0x1fffffffffcUL, val >> 18);
+ ia64_patch(insn_addr + 1, 0x1fffffffffcUL, val >> 18);
}
/*
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index d71731ee5b61..f7dfc107cb7b 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2352,7 +2352,8 @@ pfm_smpl_buffer_alloc(struct task_struct *task, pfm_context_t *ctx, unsigned lon
insert_vm_struct(mm, vma);
mm->total_vm += size >> PAGE_SHIFT;
- vm_stat_account(vma);
+ vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file,
+ vma_pages(vma));
up_write(&task->mm->mmap_sem);
/*
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index bbb8bc7c0552..4b19d0410632 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -587,8 +587,9 @@ thread_matches (struct task_struct *thread, unsigned long addr)
static struct task_struct *
find_thread_for_addr (struct task_struct *child, unsigned long addr)
{
- struct task_struct *g, *p;
+ struct task_struct *p;
struct mm_struct *mm;
+ struct list_head *this, *next;
int mm_users;
if (!(mm = get_task_mm(child)))
@@ -600,28 +601,21 @@ find_thread_for_addr (struct task_struct *child, unsigned long addr)
goto out; /* not multi-threaded */
/*
- * First, traverse the child's thread-list. Good for scalability with
- * NPTL-threads.
+ * Traverse the current process' children list. Every task that
+ * one attaches to becomes a child. And it is only attached children
+ * of the debugger that are of interest (ptrace_check_attach checks
+ * for this).
*/
- p = child;
- do {
- if (thread_matches(p, addr)) {
- child = p;
- goto out;
- }
- if (mm_users-- <= 1)
- goto out;
- } while ((p = next_thread(p)) != child);
-
- do_each_thread(g, p) {
- if (child->mm != mm)
+ list_for_each_safe(this, next, &current->children) {
+ p = list_entry(this, struct task_struct, sibling);
+ if (p->mm != mm)
continue;
-
if (thread_matches(p, addr)) {
child = p;
goto out;
}
- } while_each_thread(g, p);
+ }
+
out:
mmput(mm);
return child;
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 1f5c26dbe705..fc56ca2da358 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -78,6 +78,19 @@ struct screen_info screen_info;
unsigned long vga_console_iobase;
unsigned long vga_console_membase;
+static struct resource data_resource = {
+ .name = "Kernel data",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+ .name = "Kernel code",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+extern void efi_initialize_iomem_resources(struct resource *,
+ struct resource *);
+extern char _text[], _end[], _etext[];
+
unsigned long ia64_max_cacheline_size;
unsigned long ia64_iobase; /* virtual address for I/O accesses */
EXPORT_SYMBOL(ia64_iobase);
@@ -171,6 +184,22 @@ sort_regions (struct rsvd_region *rsvd_region, int max)
}
}
+/*
+ * Request address space for all standard resources
+ */
+static int __init register_memory(void)
+{
+ code_resource.start = ia64_tpa(_text);
+ code_resource.end = ia64_tpa(_etext) - 1;
+ data_resource.start = ia64_tpa(_etext);
+ data_resource.end = ia64_tpa(_end) - 1;
+ efi_initialize_iomem_resources(&code_resource, &data_resource);
+
+ return 0;
+}
+
+__initcall(register_memory);
+
/**
* reserve_memory - setup reserved memory areas
*
@@ -211,6 +240,9 @@ reserve_memory (void)
}
#endif
+ efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end);
+ n++;
+
/* end of memory marker */
rsvd_region[n].start = ~0UL;
rsvd_region[n].end = ~0UL;
@@ -244,28 +276,31 @@ find_initrd (void)
static void __init
io_port_init (void)
{
- extern unsigned long ia64_iobase;
unsigned long phys_iobase;
/*
- * Set `iobase' to the appropriate address in region 6 (uncached access range).
+ * Set `iobase' based on the EFI memory map or, failing that, the
+ * value firmware left in ar.k0.
*
- * The EFI memory map is the "preferred" location to get the I/O port space base,
- * rather the relying on AR.KR0. This should become more clear in future SAL
- * specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is
- * found in the memory map.
+ * Note that in ia32 mode, IN/OUT instructions use ar.k0 to compute
+ * the port's virtual address, so ia32_load_state() loads it with a
+ * user virtual address. But in ia64 mode, glibc uses the
+ * *physical* address in ar.k0 to mmap the appropriate area from
+ * /dev/mem, and the inX()/outX() interfaces use MMIO. In both
+ * cases, user-mode can only use the legacy 0-64K I/O port space.
+ *
+ * ar.k0 is not involved in kernel I/O port accesses, which can use
+ * any of the I/O port spaces and are done via MMIO using the
+ * virtual mmio_base from the appropriate io_space[].
*/
phys_iobase = efi_get_iobase();
- if (phys_iobase)
- /* set AR.KR0 since this is all we use it for anyway */
- ia64_set_kr(IA64_KR_IO_BASE, phys_iobase);
- else {
+ if (!phys_iobase) {
phys_iobase = ia64_get_kr(IA64_KR_IO_BASE);
- printk(KERN_INFO "No I/O port range found in EFI memory map, falling back "
- "to AR.KR0\n");
- printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase);
+ printk(KERN_INFO "No I/O port range found in EFI memory map, "
+ "falling back to AR.KR0 (0x%lx)\n", phys_iobase);
}
ia64_iobase = (unsigned long) ioremap(phys_iobase, 0);
+ ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
/* setup legacy IO port space */
io_space[0].mmio_base = ia64_iobase;
@@ -526,7 +561,7 @@ show_cpuinfo (struct seq_file *m, void *v)
c->itc_freq / 1000000, c->itc_freq % 1000000,
lpj*HZ/500000, (lpj*HZ/5000) % 100);
#ifdef CONFIG_SMP
- seq_printf(m, "siblings : %u\n", c->num_log);
+ seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum]));
if (c->threads_per_core > 1 || c->cores_per_socket > 1)
seq_printf(m,
"physical id: %u\n"
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 0166a9847095..657ac99a451c 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -185,8 +185,8 @@ send_IPI_allbutself (int op)
{
unsigned int i;
- for (i = 0; i < NR_CPUS; i++) {
- if (cpu_online(i) && i != smp_processor_id())
+ for_each_online_cpu(i) {
+ if (i != smp_processor_id())
send_IPI_single(i, op);
}
}
@@ -199,9 +199,9 @@ send_IPI_all (int op)
{
int i;
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_online(i))
- send_IPI_single(i, op);
+ for_each_online_cpu(i) {
+ send_IPI_single(i, op);
+ }
}
/*
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 7d72c0d872b3..400a48987124 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -694,9 +694,9 @@ smp_cpus_done (unsigned int dummy)
* Allow the user to impress friends.
*/
- for (cpu = 0; cpu < NR_CPUS; cpu++)
- if (cpu_online(cpu))
- bogosum += cpu_data(cpu)->loops_per_jiffy;
+ for_each_online_cpu(cpu) {
+ bogosum += cpu_data(cpu)->loops_per_jiffy;
+ }
printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
(int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 8b8a5a45b621..5b7e736f3b49 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -32,10 +32,6 @@
extern unsigned long wall_jiffies;
-u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
#define TIME_KEEPER_ID 0 /* smp_processor_id() of time-keeper */
#ifdef CONFIG_IA64_DEBUG_IRQ
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index 4e9d06c48a8b..c6d40446c2c4 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -205,23 +205,18 @@ EXPORT_SYMBOL(uncached_free_page);
static int __init
uncached_build_memmap(unsigned long start, unsigned long end, void *arg)
{
- long length;
- unsigned long vstart, vend;
+ long length = end - start;
int node;
- length = end - start;
- vstart = start + __IA64_UNCACHED_OFFSET;
- vend = end + __IA64_UNCACHED_OFFSET;
-
dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end);
- memset((char *)vstart, 0, length);
+ memset((char *)start, 0, length);
- node = paddr_to_nid(start);
+ node = paddr_to_nid(start - __IA64_UNCACHED_OFFSET);
- for (; vstart < vend ; vstart += PAGE_SIZE) {
- dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart);
- gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE);
+ for (; start < end ; start += PAGE_SIZE) {
+ dprintk(KERN_INFO "sticking %lx into the pool!\n", start);
+ gen_pool_free(uncached_pool[node], start, PAGE_SIZE);
}
return 0;
diff --git a/arch/ia64/mm/Makefile b/arch/ia64/mm/Makefile
index 7078f67887ec..d78d20f0a0f0 100644
--- a/arch/ia64/mm/Makefile
+++ b/arch/ia64/mm/Makefile
@@ -7,6 +7,5 @@ obj-y := init.o fault.o tlb.o extable.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
-ifndef CONFIG_DISCONTIGMEM
-obj-y += contig.o
-endif
+obj-$(CONFIG_SPARSEMEM) += discontig.o
+obj-$(CONFIG_FLATMEM) += contig.o
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 91a055f5731f..acaaec4e4681 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -269,7 +269,7 @@ paging_init (void)
efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
if (max_gap < LARGE_GAP) {
vmem_map = (struct page *) 0;
- free_area_init_node(0, &contig_page_data, zones_size, 0,
+ free_area_init_node(0, NODE_DATA(0), zones_size, 0,
zholes_size);
} else {
unsigned long map_size;
@@ -282,7 +282,7 @@ paging_init (void)
efi_memmap_walk(create_mem_map_page_table, NULL);
NODE_DATA(0)->node_mem_map = vmem_map;
- free_area_init_node(0, &contig_page_data, zones_size,
+ free_area_init_node(0, NODE_DATA(0), zones_size,
0, zholes_size);
printk("Virtual mem_map starts at 0x%p\n", mem_map);
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index b5c90e548195..a88cdb7232f8 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -421,6 +421,37 @@ static void __init memory_less_nodes(void)
return;
}
+#ifdef CONFIG_SPARSEMEM
+/**
+ * register_sparse_mem - notify SPARSEMEM that this memory range exists.
+ * @start: physical start of range
+ * @end: physical end of range
+ * @arg: unused
+ *
+ * Simply calls SPARSEMEM to register memory section(s).
+ */
+static int __init register_sparse_mem(unsigned long start, unsigned long end,
+ void *arg)
+{
+ int nid;
+
+ start = __pa(start) >> PAGE_SHIFT;
+ end = __pa(end) >> PAGE_SHIFT;
+ nid = early_pfn_to_nid(start);
+ memory_present(nid, start, end);
+
+ return 0;
+}
+
+static void __init arch_sparse_init(void)
+{
+ efi_memmap_walk(register_sparse_mem, NULL);
+ sparse_init();
+}
+#else
+#define arch_sparse_init() do {} while (0)
+#endif
+
/**
* find_memory - walk the EFI memory map and setup the bootmem allocator
*
@@ -524,12 +555,18 @@ void show_mem(void)
show_free_areas();
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_pgdat(pgdat) {
- unsigned long present = pgdat->node_present_pages;
+ unsigned long present;
+ unsigned long flags;
int shared = 0, cached = 0, reserved = 0;
+
printk("Node ID: %d\n", pgdat->node_id);
+ pgdat_resize_lock(pgdat, &flags);
+ present = pgdat->node_present_pages;
for(i = 0; i < pgdat->node_spanned_pages; i++) {
- struct page *page = pgdat_page_nr(pgdat, i);
- if (!ia64_pfn_valid(pgdat->node_start_pfn+i))
+ struct page *page;
+ if (pfn_valid(pgdat->node_start_pfn + i))
+ page = pfn_to_page(pgdat->node_start_pfn + i);
+ else
continue;
if (PageReserved(page))
reserved++;
@@ -538,6 +575,7 @@ void show_mem(void)
else if (page_count(page))
shared += page_count(page)-1;
}
+ pgdat_resize_unlock(pgdat, &flags);
total_present += present;
total_reserved += reserved;
total_cached += cached;
@@ -648,12 +686,16 @@ void __init paging_init(void)
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ arch_sparse_init();
+
efi_memmap_walk(filter_rsvd_memory, count_node_pages);
+#ifdef CONFIG_VIRTUAL_MEM_MAP
vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page));
vmem_map = (struct page *) vmalloc_end;
efi_memmap_walk(create_mem_map_page_table, NULL);
printk("Virtual mem_map starts at 0x%p\n", vmem_map);
+#endif
for_each_online_node(node) {
memset(zones_size, 0, sizeof(zones_size));
@@ -690,7 +732,9 @@ void __init paging_init(void)
pfn_offset = mem_data[node].min_pfn;
+#ifdef CONFIG_VIRTUAL_MEM_MAP
NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
+#endif
free_area_init_node(node, NODE_DATA(node), zones_size,
pfn_offset, zholes_size);
}
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 3c32af910d60..af7eb087dca7 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -20,32 +20,6 @@
extern void die (char *, struct pt_regs *, long);
/*
- * This routine is analogous to expand_stack() but instead grows the
- * register backing store (which grows towards higher addresses).
- * Since the register backing store is access sequentially, we
- * disallow growing the RBS by more than a page at a time. Note that
- * the VM_GROWSUP flag can be set on any VM area but that's fine
- * because the total process size is still limited by RLIMIT_STACK and
- * RLIMIT_AS.
- */
-static inline long
-expand_backing_store (struct vm_area_struct *vma, unsigned long address)
-{
- unsigned long grow;
-
- grow = PAGE_SIZE >> PAGE_SHIFT;
- if (address - vma->vm_start > current->signal->rlim[RLIMIT_STACK].rlim_cur
- || (((vma->vm_mm->total_vm + grow) << PAGE_SHIFT) > current->signal->rlim[RLIMIT_AS].rlim_cur))
- return -ENOMEM;
- vma->vm_end += PAGE_SIZE;
- vma->vm_mm->total_vm += grow;
- if (vma->vm_flags & VM_LOCKED)
- vma->vm_mm->locked_vm += grow;
- __vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file, grow);
- return 0;
-}
-
-/*
* Return TRUE if ADDRESS points at a page in the kernel's mapped segment
* (inside region 5, on ia64) and that page is present.
*/
@@ -185,7 +159,13 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start)
|| REGION_OFFSET(address) >= RGN_MAP_LIMIT)
goto bad_area;
- if (expand_backing_store(vma, address))
+ /*
+ * Since the register backing store is accessed sequentially,
+ * we disallow growing it by more than a page at a time.
+ */
+ if (address > vma->vm_end + PAGE_SIZE - sizeof(long))
+ goto bad_area;
+ if (expand_upwards(vma, address))
goto bad_area;
}
goto good_area;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 1281c609ee98..e3215ba64ffd 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -158,7 +158,7 @@ ia64_init_addr_space (void)
vma->vm_start = current->thread.rbs_bot & PAGE_MASK;
vma->vm_end = vma->vm_start + PAGE_SIZE;
vma->vm_page_prot = protection_map[VM_DATA_DEFAULT_FLAGS & 0x7];
- vma->vm_flags = VM_DATA_DEFAULT_FLAGS | VM_GROWSUP;
+ vma->vm_flags = VM_DATA_DEFAULT_FLAGS|VM_GROWSUP|VM_ACCOUNT;
down_write(&current->mm->mmap_sem);
if (insert_vm_struct(current->mm, vma)) {
up_write(&current->mm->mmap_sem);
@@ -275,26 +275,21 @@ put_kernel_page (struct page *page, unsigned long address, pgprot_t pgprot)
pgd = pgd_offset_k(address); /* note: this is NOT pgd_offset()! */
- spin_lock(&init_mm.page_table_lock);
{
pud = pud_alloc(&init_mm, pgd, address);
if (!pud)
goto out;
-
pmd = pmd_alloc(&init_mm, pud, address);
if (!pmd)
goto out;
- pte = pte_alloc_map(&init_mm, pmd, address);
+ pte = pte_alloc_kernel(pmd, address);
if (!pte)
goto out;
- if (!pte_none(*pte)) {
- pte_unmap(pte);
+ if (!pte_none(*pte))
goto out;
- }
set_pte(pte, mk_pte(page, pgprot));
- pte_unmap(pte);
}
- out: spin_unlock(&init_mm.page_table_lock);
+ out:
/* no need for flush_tlb */
return page;
}
@@ -593,7 +588,7 @@ mem_init (void)
platform_dma_init();
#endif
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
if (!mem_map)
BUG();
max_mapnr = max_low_pfn;
diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index 77118bbf3d8b..4e5c8b36ad93 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -47,3 +47,27 @@ paddr_to_nid(unsigned long paddr)
return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
}
+
+#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
+/*
+ * Because of holes evaluate on section limits.
+ * If the section of memory exists, then return the node where the section
+ * resides. Otherwise return node 0 as the default. This is used by
+ * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
+ * the section resides.
+ */
+int early_pfn_to_nid(unsigned long pfn)
+{
+ int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
+
+ for (i = 0; i < num_node_memblks; i++) {
+ ssec = node_memblk[i].start_paddr >> PA_SECTION_SHIFT;
+ esec = (node_memblk[i].start_paddr + node_memblk[i].size +
+ ((1L << PA_SECTION_SHIFT) - 1)) >> PA_SECTION_SHIFT;
+ if (section >= ssec && section < esec)
+ return node_memblk[i].nid;
+ }
+
+ return 0;
+}
+#endif
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 464557e4ed82..c79a9b96d02b 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -77,19 +77,25 @@ wrap_mmu_context (struct mm_struct *mm)
/* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */
{
int cpu = get_cpu(); /* prevent preemption/migration */
- for (i = 0; i < NR_CPUS; ++i)
- if (cpu_online(i) && (i != cpu))
+ for_each_online_cpu(i) {
+ if (i != cpu)
per_cpu(ia64_need_tlb_flush, i) = 1;
+ }
put_cpu();
}
local_flush_tlb_all();
}
void
-ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits)
+ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long nbits)
{
static DEFINE_SPINLOCK(ptcg_lock);
+ if (mm != current->active_mm) {
+ flush_tlb_all();
+ return;
+ }
+
/* HW requires global serialization of ptc.ga. */
spin_lock(&ptcg_lock);
{
@@ -135,15 +141,12 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long
unsigned long size = end - start;
unsigned long nbits;
+#ifndef CONFIG_SMP
if (mm != current->active_mm) {
- /* this does happen, but perhaps it's not worth optimizing for? */
-#ifdef CONFIG_SMP
- flush_tlb_all();
-#else
mm->context = 0;
-#endif
return;
}
+#endif
nbits = ia64_fls(size + 0xfff);
while (unlikely (((1UL << nbits) & purge.mask) == 0) && (nbits < purge.max_bits))
@@ -153,12 +156,14 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long
start &= ~((1UL << nbits) - 1);
# ifdef CONFIG_SMP
- platform_global_tlb_purge(start, end, nbits);
+ platform_global_tlb_purge(mm, start, end, nbits);
# else
+ preempt_disable();
do {
ia64_ptcl(start, (nbits<<2));
start += (1UL << nbits);
} while (start < end);
+ preempt_enable();
# endif
ia64_srlz_i(); /* srlz.i implies srlz.d */
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 9b5de589b82f..017cfc3f4789 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -120,29 +120,6 @@ struct pci_ops pci_root_ops = {
.write = pci_write,
};
-#ifdef CONFIG_NUMA
-extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **);
-static void acpi_map_iosapics(void)
-{
- acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
-}
-#else
-static void acpi_map_iosapics(void)
-{
- return;
-}
-#endif /* CONFIG_NUMA */
-
-static int __init
-pci_acpi_init (void)
-{
- acpi_map_iosapics();
-
- return 0;
-}
-
-subsys_initcall(pci_acpi_init);
-
/* Called by ACPI when it finds a new root bus. */
static struct pci_controller * __devinit
@@ -191,6 +168,29 @@ add_io_space (struct acpi_resource_address64 *addr)
return IO_SPACE_BASE(i);
}
+static acpi_status __devinit resource_to_window(struct acpi_resource *resource,
+ struct acpi_resource_address64 *addr)
+{
+ acpi_status status;
+
+ /*
+ * We're only interested in _CRS descriptors that are
+ * - address space descriptors for memory or I/O space
+ * - non-zero size
+ * - producers, i.e., the address space is routed downstream,
+ * not consumed by the bridge itself
+ */
+ status = acpi_resource_to_address64(resource, addr);
+ if (ACPI_SUCCESS(status) &&
+ (addr->resource_type == ACPI_MEMORY_RANGE ||
+ addr->resource_type == ACPI_IO_RANGE) &&
+ addr->address_length &&
+ addr->producer_consumer == ACPI_PRODUCER)
+ return AE_OK;
+
+ return AE_ERROR;
+}
+
static acpi_status __devinit
count_window (struct acpi_resource *resource, void *data)
{
@@ -198,11 +198,9 @@ count_window (struct acpi_resource *resource, void *data)
struct acpi_resource_address64 addr;
acpi_status status;
- status = acpi_resource_to_address64(resource, &addr);
+ status = resource_to_window(resource, &addr);
if (ACPI_SUCCESS(status))
- if (addr.resource_type == ACPI_MEMORY_RANGE ||
- addr.resource_type == ACPI_IO_RANGE)
- (*windows)++;
+ (*windows)++;
return AE_OK;
}
@@ -221,13 +219,11 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
unsigned long flags, offset = 0;
struct resource *root;
- status = acpi_resource_to_address64(res, &addr);
+ /* Return AE_OK for non-window resources to keep scanning for more */
+ status = resource_to_window(res, &addr);
if (!ACPI_SUCCESS(status))
return AE_OK;
- if (!addr.address_length)
- return AE_OK;
-
if (addr.resource_type == ACPI_MEMORY_RANGE) {
flags = IORESOURCE_MEM;
root = &iomem_resource;
diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c
index 45854c637e9c..d71f4de44f79 100644
--- a/arch/ia64/sn/kernel/bte.c
+++ b/arch/ia64/sn/kernel/bte.c
@@ -87,7 +87,7 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
unsigned long irq_flags;
unsigned long itc_end = 0;
int nasid_to_try[MAX_NODES_TO_TRY];
- int my_nasid = get_nasid();
+ int my_nasid = cpuid_to_nasid(raw_smp_processor_id());
int bte_if_index, nasid_index;
int bte_first, btes_per_node = BTES_PER_NODE;
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 906622d9f933..b4f5053f5e1b 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -22,8 +22,6 @@
#include "xtalk/hubdev.h"
#include "xtalk/xwidgetdev.h"
-nasid_t master_nasid = INVALID_NASID; /* Partition Master */
-
static struct list_head sn_sysdata_list;
/* sysdata list struct */
@@ -165,7 +163,7 @@ static void sn_fixup_ionodes(void)
* Get SGI Specific HUB chipset information.
* Inform Prom that this kernel can support domain bus numbering.
*/
- for (i = 0; i < numionodes; i++) {
+ for (i = 0; i < num_cnodes; i++) {
hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
nasid = cnodeid_to_nasid(i);
hubdev->max_segment_number = 0xffffffff;
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 6f8c5883716b..0fb579ef18c2 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -59,8 +59,6 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu);
#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */
-lboard_t *root_lboard[MAX_COMPACT_NODES];
-
extern void bte_init_node(nodepda_t *, cnodeid_t);
extern void sn_timer_init(void);
@@ -97,15 +95,15 @@ u8 sn_region_size;
EXPORT_SYMBOL(sn_region_size);
int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
-short physical_node_map[MAX_PHYSNODE_ID];
+short physical_node_map[MAX_NUMALINK_NODES];
static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS];
EXPORT_SYMBOL(physical_node_map);
-int numionodes;
+int num_cnodes;
static void sn_init_pdas(char **);
-static void scan_for_ionodes(void);
+static void build_cnode_tables(void);
static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
@@ -140,19 +138,6 @@ char drive_info[4 * 16];
#endif
/*
- * Get nasid of current cpu early in boot before nodepda is initialized
- */
-static int
-boot_get_nasid(void)
-{
- int nasid;
-
- if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL))
- BUG();
- return nasid;
-}
-
-/*
* This routine can only be used during init, since
* smp_boot_data is an init data structure.
* We have to use smp_boot_data.cpu_phys_id to find
@@ -223,7 +208,6 @@ void __init early_sn_setup(void)
}
extern int platform_intr_list[];
-extern nasid_t master_nasid;
static int __initdata shub_1_1_found = 0;
/*
@@ -269,7 +253,6 @@ static void __init sn_check_for_wars(void)
void __init sn_setup(char **cmdline_p)
{
long status, ticks_per_sec, drift;
- int pxm;
u32 version = sn_sal_rev();
extern void sn_cpu_init(void);
@@ -300,11 +283,10 @@ void __init sn_setup(char **cmdline_p)
MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
- memset(physical_node_map, -1, sizeof(physical_node_map));
- for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++)
- if (pxm_to_nid_map[pxm] != -1)
- physical_node_map[pxm_to_nasid(pxm)] =
- pxm_to_nid_map[pxm];
+ /*
+ * Build the tables for managing cnodes.
+ */
+ build_cnode_tables();
/*
* Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
@@ -319,8 +301,6 @@ void __init sn_setup(char **cmdline_p)
printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
- master_nasid = boot_get_nasid();
-
status =
ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
&drift);
@@ -378,15 +358,6 @@ static void __init sn_init_pdas(char **cmdline_p)
{
cnodeid_t cnode;
- memset(sn_cnodeid_to_nasid, -1,
- sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
- for_each_online_node(cnode)
- sn_cnodeid_to_nasid[cnode] =
- pxm_to_nasid(nid_to_pxm_map[cnode]);
-
- numionodes = num_online_nodes();
- scan_for_ionodes();
-
/*
* Allocate & initalize the nodepda for each node.
*/
@@ -402,7 +373,7 @@ static void __init sn_init_pdas(char **cmdline_p)
/*
* Allocate & initialize nodepda for TIOs. For now, put them on node 0.
*/
- for (cnode = num_online_nodes(); cnode < numionodes; cnode++) {
+ for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
@@ -411,7 +382,7 @@ static void __init sn_init_pdas(char **cmdline_p)
/*
* Now copy the array of nodepda pointers to each nodepda.
*/
- for (cnode = 0; cnode < numionodes; cnode++)
+ for (cnode = 0; cnode < num_cnodes; cnode++)
memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
sizeof(nodepdaindr));
@@ -428,7 +399,7 @@ static void __init sn_init_pdas(char **cmdline_p)
* Initialize the per node hubdev. This includes IO Nodes and
* headless/memless nodes.
*/
- for (cnode = 0; cnode < numionodes; cnode++) {
+ for (cnode = 0; cnode < num_cnodes; cnode++) {
hubdev_init_node(nodepdaindr[cnode], cnode);
}
}
@@ -553,87 +524,58 @@ void __init sn_cpu_init(void)
}
/*
- * Scan klconfig for ionodes. Add the nasids to the
- * physical_node_map and the pda and increment numionodes.
+ * Build tables for converting between NASIDs and cnodes.
*/
+static inline int __init board_needs_cnode(int type)
+{
+ return (type == KLTYPE_SNIA || type == KLTYPE_TIO);
+}
-static void __init scan_for_ionodes(void)
+void __init build_cnode_tables(void)
{
- int nasid = 0;
+ int nasid;
+ int node;
lboard_t *brd;
- /* fakeprom does not support klgraph */
- if (IS_RUNNING_ON_FAKE_PROM())
- return;
-
- /* Setup ionodes with memory */
- for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
- char *klgraph_header;
- cnodeid_t cnodeid;
-
- if (physical_node_map[nasid] == -1)
- continue;
+ memset(physical_node_map, -1, sizeof(physical_node_map));
+ memset(sn_cnodeid_to_nasid, -1,
+ sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
- cnodeid = -1;
- klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
- if (!klgraph_header) {
- BUG(); /* All nodes must have klconfig tables! */
- }
- cnodeid = nasid_to_cnodeid(nasid);
- root_lboard[cnodeid] = (lboard_t *)
- NODE_OFFSET_TO_LBOARD((nasid),
- ((kl_config_hdr_t
- *) (klgraph_header))->
- ch_board_info);
+ /*
+ * First populate the tables with C/M bricks. This ensures that
+ * cnode == node for all C & M bricks.
+ */
+ for_each_online_node(node) {
+ nasid = pxm_to_nasid(nid_to_pxm_map[node]);
+ sn_cnodeid_to_nasid[node] = nasid;
+ physical_node_map[nasid] = node;
}
- /* Scan headless/memless IO Nodes. */
- for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
- /* if there's no nasid, don't try to read the klconfig on the node */
- if (physical_node_map[nasid] == -1)
- continue;
- brd = find_lboard_any((lboard_t *)
- root_lboard[nasid_to_cnodeid(nasid)],
- KLTYPE_SNIA);
- if (brd) {
- brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */
- if (!brd)
- continue;
- }
-
- brd = find_lboard_any(brd, KLTYPE_SNIA);
+ /*
+ * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node
+ * limit on the number of nodes, we can't use the generic node numbers
+ * for this. Note that num_cnodes is incremented below as TIOs or
+ * headless/memoryless nodes are discovered.
+ */
+ num_cnodes = num_online_nodes();
- while (brd) {
- sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
- physical_node_map[brd->brd_nasid] = numionodes;
- root_lboard[numionodes] = brd;
- numionodes++;
- brd = KLCF_NEXT_ANY(brd);
- if (!brd)
- break;
-
- brd = find_lboard_any(brd, KLTYPE_SNIA);
- }
- }
+ /* fakeprom does not support klgraph */
+ if (IS_RUNNING_ON_FAKE_PROM())
+ return;
- /* Scan for TIO nodes. */
- for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
- /* if there's no nasid, don't try to read the klconfig on the node */
- if (physical_node_map[nasid] == -1)
- continue;
- brd = find_lboard_any((lboard_t *)
- root_lboard[nasid_to_cnodeid(nasid)],
- KLTYPE_TIO);
+ /* Find TIOs & headless/memoryless nodes and add them to the tables */
+ for_each_online_node(node) {
+ kl_config_hdr_t *klgraph_header;
+ nasid = cnodeid_to_nasid(node);
+ if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
+ BUG();
+ brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
while (brd) {
- sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
- physical_node_map[brd->brd_nasid] = numionodes;
- root_lboard[numionodes] = brd;
- numionodes++;
- brd = KLCF_NEXT_ANY(brd);
- if (!brd)
- break;
-
- brd = find_lboard_any(brd, KLTYPE_TIO);
+ if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) {
+ sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid;
+ physical_node_map[brd->brd_nasid] = num_cnodes++;
+ }
+ brd = find_lboard_next(brd);
}
}
}
diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
index 0a4ee50c302f..49b530c39a42 100644
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c
@@ -177,6 +177,7 @@ void sn_tlb_migrate_finish(struct mm_struct *mm)
/**
* sn2_global_tlb_purge - globally purge translation cache of virtual address range
+ * @mm: mm_struct containing virtual address range
* @start: start of virtual address range
* @end: end of virtual address range
* @nbits: specifies number of bytes to purge per instruction (num = 1<<(nbits & 0xfc))
@@ -188,21 +189,22 @@ void sn_tlb_migrate_finish(struct mm_struct *mm)
* - cpu_vm_mask is a bit mask that indicates which cpus have loaded the context.
* - cpu_vm_mask is converted into a nodemask of the nodes containing the
* cpus in cpu_vm_mask.
- * - if only one bit is set in cpu_vm_mask & it is the current cpu,
- * then only the local TLB needs to be flushed. This flushing can be done
- * using ptc.l. This is the common case & avoids the global spinlock.
+ * - if only one bit is set in cpu_vm_mask & it is the current cpu & the
+ * process is purging its own virtual address range, then only the
+ * local TLB needs to be flushed. This flushing can be done using
+ * ptc.l. This is the common case & avoids the global spinlock.
* - if multiple cpus have loaded the context, then flushing has to be
* done with ptc.g/MMRs under protection of the global ptc_lock.
*/
void
-sn2_global_tlb_purge(unsigned long start, unsigned long end,
- unsigned long nbits)
+sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
+ unsigned long end, unsigned long nbits)
{
int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
+ int mymm = (mm == current->active_mm);
volatile unsigned long *ptc0, *ptc1;
- unsigned long itc, itc2, flags, data0 = 0, data1 = 0;
- struct mm_struct *mm = current->active_mm;
+ unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value;
short nasids[MAX_NUMNODES], nix;
nodemask_t nodes_flushed;
@@ -216,9 +218,12 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
i++;
}
+ if (i == 0)
+ return;
+
preempt_disable();
- if (likely(i == 1 && lcpu == smp_processor_id())) {
+ if (likely(i == 1 && lcpu == smp_processor_id() && mymm)) {
do {
ia64_ptcl(start, nbits << 2);
start += (1UL << nbits);
@@ -229,7 +234,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
return;
}
- if (atomic_read(&mm->mm_users) == 1) {
+ if (atomic_read(&mm->mm_users) == 1 && mymm) {
flush_tlb_mm(mm);
__get_cpu_var(ptcstats).change_rid++;
preempt_enable();
@@ -241,11 +246,13 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
for_each_node_mask(cnode, nodes_flushed)
nasids[nix++] = cnodeid_to_nasid(cnode);
+ rr_value = (mm->context << 3) | REGION_NUMBER(start);
+
shub1 = is_shub1();
if (shub1) {
data0 = (1UL << SH1_PTC_0_A_SHFT) |
(nbits << SH1_PTC_0_PS_SHFT) |
- ((ia64_get_rr(start) >> 8) << SH1_PTC_0_RID_SHFT) |
+ (rr_value << SH1_PTC_0_RID_SHFT) |
(1UL << SH1_PTC_0_START_SHFT);
ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_0);
ptc1 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_1);
@@ -254,7 +261,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
(nbits << SH2_PTC_PS_SHFT) |
(1UL << SH2_PTC_START_SHFT);
ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH2_PTC +
- ((ia64_get_rr(start) >> 8) << SH2_PTC_RID_SHFT) );
+ (rr_value << SH2_PTC_RID_SHFT));
ptc1 = NULL;
}
@@ -275,7 +282,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
for (i = 0; i < nix; i++) {
nasid = nasids[i];
- if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid)) {
+ if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) {
ia64_ptcga(start, nbits << 2);
ia64_srlz_i();
} else {
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 0513aacac8c1..6c6fbca3229c 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -476,8 +476,8 @@ static int sn_topology_show(struct seq_file *s, void *d)
for_each_online_cpu(j) {
seq_printf(s, j ? ":%d" : ", dist %d",
node_distance(
- cpuid_to_cnodeid(i),
- cpuid_to_cnodeid(j)));
+ cpu_to_node(i),
+ cpu_to_node(j)));
}
seq_putc(s, '\n');
}
diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c
index b45db5133f55..0d8592a745a7 100644
--- a/arch/ia64/sn/kernel/tiocx.c
+++ b/arch/ia64/sn/kernel/tiocx.c
@@ -183,11 +183,12 @@ int cx_driver_unregister(struct cx_drv *cx_driver)
* @part_num: device's part number
* @mfg_num: device's manufacturer number
* @hubdev: hub info associated with this device
+ * @bt: board type of the device
*
*/
int
cx_device_register(nasid_t nasid, int part_num, int mfg_num,
- struct hubdev_info *hubdev)
+ struct hubdev_info *hubdev, int bt)
{
struct cx_dev *cx_dev;
@@ -200,6 +201,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
cx_dev->cx_id.mfg_num = mfg_num;
cx_dev->cx_id.nasid = nasid;
cx_dev->hubdev = hubdev;
+ cx_dev->bt = bt;
cx_dev->dev.parent = NULL;
cx_dev->dev.bus = &tiocx_bus_type;
@@ -238,7 +240,8 @@ static int cx_device_reload(struct cx_dev *cx_dev)
{
cx_device_unregister(cx_dev);
return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
- cx_dev->cx_id.mfg_num, cx_dev->hubdev);
+ cx_dev->cx_id.mfg_num, cx_dev->hubdev,
+ cx_dev->bt);
}
static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget,
@@ -365,26 +368,20 @@ static void tio_corelet_reset(nasid_t nasid, int corelet)
udelay(2000);
}
-static int tiocx_btchar_get(int nasid)
+static int is_fpga_tio(int nasid, int *bt)
{
- moduleid_t module_id;
- geoid_t geoid;
- int cnodeid;
-
- cnodeid = nasid_to_cnodeid(nasid);
- geoid = cnodeid_get_geoid(cnodeid);
- module_id = geo_module(geoid);
- return MODULE_GET_BTCHAR(module_id);
-}
+ int ioboard_type;
-static int is_fpga_brick(int nasid)
-{
- switch (tiocx_btchar_get(nasid)) {
+ ioboard_type = ia64_sn_sysctl_ioboard_get(nasid);
+
+ switch (ioboard_type) {
case L1_BRICKTYPE_SA:
case L1_BRICKTYPE_ATHENA:
- case L1_BRICKTYPE_DAYTONA:
+ case L1_BOARDTYPE_DAYTONA:
+ *bt = ioboard_type;
return 1;
}
+
return 0;
}
@@ -407,16 +404,22 @@ static int tiocx_reload(struct cx_dev *cx_dev)
if (bitstream_loaded(nasid)) {
uint64_t cx_id;
-
- cx_id =
- *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
+ int rv;
+
+ rv = ia64_sn_sysctl_tio_clock_reset(nasid);
+ if (rv) {
+ printk(KERN_ALERT "CX port JTAG reset failed.\n");
+ } else {
+ cx_id = *(volatile uint64_t *)
+ (TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
WIDGET_ID);
- part_num = XWIDGET_PART_NUM(cx_id);
- mfg_num = XWIDGET_MFG_NUM(cx_id);
- DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
- /* just ignore it if it's a CE */
- if (part_num == TIO_CE_ASIC_PARTNUM)
- return 0;
+ part_num = XWIDGET_PART_NUM(cx_id);
+ mfg_num = XWIDGET_MFG_NUM(cx_id);
+ DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
+ /* just ignore it if it's a CE */
+ if (part_num == TIO_CE_ASIC_PARTNUM)
+ return 0;
+ }
}
cx_dev->cx_id.part_num = part_num;
@@ -436,10 +439,10 @@ static ssize_t show_cxdev_control(struct device *dev, struct device_attribute *a
{
struct cx_dev *cx_dev = to_cx_dev(dev);
- return sprintf(buf, "0x%x 0x%x 0x%x %d\n",
+ return sprintf(buf, "0x%x 0x%x 0x%x 0x%x\n",
cx_dev->cx_id.nasid,
cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num,
- tiocx_btchar_get(cx_dev->cx_id.nasid));
+ cx_dev->bt);
}
static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf,
@@ -486,13 +489,13 @@ static int __init tiocx_init(void)
bus_register(&tiocx_bus_type);
- for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) {
+ for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) {
nasid_t nasid;
+ int bt;
- if ((nasid = cnodeid_to_nasid(cnodeid)) < 0)
- break; /* No more nasids .. bail out of loop */
+ nasid = cnodeid_to_nasid(cnodeid);
- if ((nasid & 0x1) && is_fpga_brick(nasid)) {
+ if ((nasid & 0x1) && is_fpga_tio(nasid, &bt)) {
struct hubdev_info *hubdev;
struct xwidget_info *widgetp;
@@ -512,7 +515,7 @@ static int __init tiocx_init(void)
if (cx_device_register
(nasid, widgetp->xwi_hwid.part_num,
- widgetp->xwi_hwid.mfg_num, hubdev) < 0)
+ widgetp->xwi_hwid.mfg_num, hubdev, bt) < 0)
return -ENXIO;
else
found_tiocx_device++;
diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h
index d0ee635daf2e..fbcedc7c27fa 100644
--- a/arch/ia64/sn/kernel/xpc.h
+++ b/arch/ia64/sn/kernel/xpc.h
@@ -57,7 +57,7 @@
#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
#define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */
-#define XPC_HB_CHECK_DEFAULT_TIMEOUT 20 /* check HB every x secs */
+#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */
/* define the process name of HB checker and the CPU it is pinned to */
#define XPC_HB_CHECK_THREAD_NAME "xpc_hb"
@@ -67,34 +67,82 @@
#define XPC_DISCOVERY_THREAD_NAME "xpc_discovery"
-#define XPC_HB_ALLOWED(_p, _v) ((_v)->heartbeating_to_mask & (1UL << (_p)))
-#define XPC_ALLOW_HB(_p, _v) (_v)->heartbeating_to_mask |= (1UL << (_p))
-#define XPC_DISALLOW_HB(_p, _v) (_v)->heartbeating_to_mask &= (~(1UL << (_p)))
-
-
/*
- * Reserved Page provided by SAL.
+ * the reserved page
+ *
+ * SAL reserves one page of memory per partition for XPC. Though a full page
+ * in length (16384 bytes), its starting address is not page aligned, but it
+ * is cacheline aligned. The reserved page consists of the following:
+ *
+ * reserved page header
+ *
+ * The first cacheline of the reserved page contains the header
+ * (struct xpc_rsvd_page). Before SAL initialization has completed,
+ * SAL has set up the following fields of the reserved page header:
+ * SAL_signature, SAL_version, partid, and nasids_size. The other
+ * fields are set up by XPC. (xpc_rsvd_page points to the local
+ * partition's reserved page.)
*
- * SAL provides one page per partition of reserved memory. When SAL
- * initialization is complete, SAL_signature, SAL_version, partid,
- * part_nasids, and mach_nasids are set.
+ * part_nasids mask
+ * mach_nasids mask
+ *
+ * SAL also sets up two bitmaps (or masks), one that reflects the actual
+ * nasids in this partition (part_nasids), and the other that reflects
+ * the actual nasids in the entire machine (mach_nasids). We're only
+ * interested in the even numbered nasids (which contain the processors
+ * and/or memory), so we only need half as many bits to represent the
+ * nasids. The part_nasids mask is located starting at the first cacheline
+ * following the reserved page header. The mach_nasids mask follows right
+ * after the part_nasids mask. The size in bytes of each mask is reflected
+ * by the reserved page header field 'nasids_size'. (Local partition's
+ * mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ *
+ * vars
+ * vars part
+ *
+ * Immediately following the mach_nasids mask are the XPC variables
+ * required by other partitions. First are those that are generic to all
+ * partitions (vars), followed on the next available cacheline by those
+ * which are partition specific (vars part). These are setup by XPC.
+ * (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
*
* Note: Until vars_pa is set, the partition XPC code has not been initialized.
*/
struct xpc_rsvd_page {
- u64 SAL_signature; /* SAL unique signature */
- u64 SAL_version; /* SAL specified version */
- u8 partid; /* partition ID from SAL */
+ u64 SAL_signature; /* SAL: unique signature */
+ u64 SAL_version; /* SAL: version */
+ u8 partid; /* SAL: partition ID */
u8 version;
- u8 pad[6]; /* pad to u64 align */
+ u8 pad1[6]; /* align to next u64 in cacheline */
volatile u64 vars_pa;
- u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
- u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
+ struct timespec stamp; /* time when reserved page was setup by XPC */
+ u64 pad2[9]; /* align to last u64 in cacheline */
+ u64 nasids_size; /* SAL: size of each nasid mask in bytes */
};
-#define XPC_RP_VERSION _XPC_VERSION(1,0) /* version 1.0 of the reserved page */
-#define XPC_RSVD_PAGE_ALIGNED_SIZE \
- (L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)))
+#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */
+
+#define XPC_SUPPORTS_RP_STAMP(_version) \
+ (_version >= _XPC_VERSION(1,1))
+
+/*
+ * compare stamps - the return value is:
+ *
+ * < 0, if stamp1 < stamp2
+ * = 0, if stamp1 == stamp2
+ * > 0, if stamp1 > stamp2
+ */
+static inline int
+xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
+{
+ int ret;
+
+
+ if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) {
+ ret = stamp1->tv_nsec - stamp2->tv_nsec;
+ }
+ return ret;
+}
/*
@@ -121,11 +169,58 @@ struct xpc_vars {
u64 vars_part_pa;
u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */
AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */
- AMO_t *act_amos; /* pointer to the first activation AMO */
};
-#define XPC_V_VERSION _XPC_VERSION(3,0) /* version 3.0 of the cross vars */
-#define XPC_VARS_ALIGNED_SIZE (L1_CACHE_ALIGN(sizeof(struct xpc_vars)))
+#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */
+
+#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
+ (_version >= _XPC_VERSION(3,1))
+
+
+static inline int
+xpc_hb_allowed(partid_t partid, struct xpc_vars *vars)
+{
+ return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
+}
+
+static inline void
+xpc_allow_hb(partid_t partid, struct xpc_vars *vars)
+{
+ u64 old_mask, new_mask;
+
+ do {
+ old_mask = vars->heartbeating_to_mask;
+ new_mask = (old_mask | (1UL << partid));
+ } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+ old_mask);
+}
+
+static inline void
+xpc_disallow_hb(partid_t partid, struct xpc_vars *vars)
+{
+ u64 old_mask, new_mask;
+
+ do {
+ old_mask = vars->heartbeating_to_mask;
+ new_mask = (old_mask & ~(1UL << partid));
+ } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+ old_mask);
+}
+
+
+/*
+ * The AMOs page consists of a number of AMO variables which are divided into
+ * four groups, The first two groups are used to identify an IRQ's sender.
+ * These two groups consist of 64 and 128 AMO variables respectively. The last
+ * two groups, consisting of just one AMO variable each, are used to identify
+ * the remote partitions that are currently engaged (from the viewpoint of
+ * the XPC running on the remote partition).
+ */
+#define XPC_NOTIFY_IRQ_AMOS 0
+#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
+#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
+#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1)
+
/*
* The following structure describes the per partition specific variables.
@@ -165,6 +260,16 @@ struct xpc_vars_part {
#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
+/* the reserved page sizes and offsets */
+
+#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
+#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+
+#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE)
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS(_rp) ((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS_PART(_rp) (struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE)
+
/*
* Functions registered by add_timer() or called by kernel_thread() only
@@ -349,6 +454,9 @@ struct xpc_channel {
atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */
wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */
+ u8 delayed_IPI_flags; /* IPI flags received, but delayed */
+ /* action until channel disconnected */
+
/* queue of msg senders who want to be notified when msg received */
atomic_t n_to_notify; /* #of msg senders to notify */
@@ -358,7 +466,7 @@ struct xpc_channel {
void *key; /* pointer to user's key */
struct semaphore msg_to_pull_sema; /* next msg to pull serialization */
- struct semaphore teardown_sema; /* wait for teardown completion */
+ struct semaphore wdisconnect_sema; /* wait for channel disconnect */
struct xpc_openclose_args *local_openclose_args; /* args passed on */
/* opening or closing of channel */
@@ -410,6 +518,8 @@ struct xpc_channel {
#define XPC_C_DISCONNECTED 0x00002000 /* channel is disconnected */
#define XPC_C_DISCONNECTING 0x00004000 /* channel is being disconnected */
+#define XPC_C_DISCONNECTCALLOUT 0x00008000 /* chan disconnected callout made */
+#define XPC_C_WDISCONNECT 0x00010000 /* waiting for channel disconnect */
@@ -422,6 +532,8 @@ struct xpc_partition {
/* XPC HB infrastructure */
+ u8 remote_rp_version; /* version# of partition's rsvd pg */
+ struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */
u64 remote_rp_pa; /* phys addr of partition's rsvd pg */
u64 remote_vars_pa; /* phys addr of partition's vars */
u64 remote_vars_part_pa; /* phys addr of partition's vars part */
@@ -432,14 +544,18 @@ struct xpc_partition {
u32 act_IRQ_rcvd; /* IRQs since activation */
spinlock_t act_lock; /* protect updating of act_state */
u8 act_state; /* from XPC HB viewpoint */
+ u8 remote_vars_version; /* version# of partition's vars */
enum xpc_retval reason; /* reason partition is deactivating */
int reason_line; /* line# deactivation initiated from */
int reactivate_nasid; /* nasid in partition to reactivate */
+ unsigned long disengage_request_timeout; /* timeout in jiffies */
+ struct timer_list disengage_request_timer;
+
/* XPC infrastructure referencing and teardown control */
- volatile u8 setup_state; /* infrastructure setup state */
+ volatile u8 setup_state; /* infrastructure setup state */
wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */
atomic_t references; /* #of references to infrastructure */
@@ -454,6 +570,7 @@ struct xpc_partition {
u8 nchannels; /* #of defined channels supported */
atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */
+ atomic_t nchannels_engaged;/* #of channels engaged with remote part */
struct xpc_channel *channels;/* array of channel structures */
void *local_GPs_base; /* base address of kmalloc'd space */
@@ -518,6 +635,7 @@ struct xpc_partition {
#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */
+
/*
* struct xpc_partition IPI_timer #of seconds to wait before checking for
* dropped IPIs. These occur whenever an IPI amo write doesn't complete until
@@ -526,6 +644,13 @@ struct xpc_partition {
#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ)
+/* number of seconds to wait for other partitions to disengage */
+#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90
+
+/* interval in seconds to print 'waiting disengagement' messages */
+#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10
+
+
#define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0]))
@@ -534,24 +659,20 @@ struct xpc_partition {
extern struct xpc_registration xpc_registrations[];
-/* >>> found in xpc_main.c only */
+/* found in xpc_main.c */
extern struct device *xpc_part;
extern struct device *xpc_chan;
+extern int xpc_disengage_request_timelimit;
extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *);
extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern void xpc_activate_partition(struct xpc_partition *);
extern void xpc_activate_kthreads(struct xpc_channel *, int);
extern void xpc_create_kthreads(struct xpc_channel *, int);
extern void xpc_disconnect_wait(int);
-/* found in xpc_main.c and efi-xpc.c */
-extern void xpc_activate_partition(struct xpc_partition *);
-
-
/* found in xpc_partition.c */
extern int xpc_exiting;
-extern int xpc_hb_interval;
-extern int xpc_hb_check_interval;
extern struct xpc_vars *xpc_vars;
extern struct xpc_rsvd_page *xpc_rsvd_page;
extern struct xpc_vars_part *xpc_vars_part;
@@ -561,6 +682,7 @@ extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
extern void xpc_allow_IPI_ops(void);
extern void xpc_restrict_IPI_ops(void);
extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_partition_disengaged(struct xpc_partition *);
extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *);
extern void xpc_mark_partition_inactive(struct xpc_partition *);
extern void xpc_discovery(void);
@@ -585,8 +707,8 @@ extern void xpc_connected_callout(struct xpc_channel *);
extern void xpc_deliver_msg(struct xpc_channel *);
extern void xpc_disconnect_channel(const int, struct xpc_channel *,
enum xpc_retval, unsigned long *);
-extern void xpc_disconnected_callout(struct xpc_channel *);
-extern void xpc_partition_down(struct xpc_partition *, enum xpc_retval);
+extern void xpc_disconnecting_callout(struct xpc_channel *);
+extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval);
extern void xpc_teardown_infrastructure(struct xpc_partition *);
@@ -674,6 +796,157 @@ xpc_part_ref(struct xpc_partition *part)
/*
+ * This next set of inlines are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static inline void
+xpc_mark_partition_engaged(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* set bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+ (1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_mark_partition_disengaged(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* clear bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~(1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_request_partition_disengage(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* set bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+ (1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_cancel_partition_disengage_request(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* clear bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~(1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline u64
+xpc_partition_engaged(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+ /* return our partition's AMO variable ANDed with partid_mask */
+ return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+ partid_mask);
+}
+
+static inline u64
+xpc_partition_disengage_requested(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+ /* return our partition's AMO variable ANDed with partid_mask */
+ return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+ partid_mask);
+}
+
+static inline void
+xpc_clear_partition_engaged(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+ /* clear bit(s) based on partid_mask in our partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~partid_mask);
+}
+
+static inline void
+xpc_clear_partition_disengage_request(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+ /* clear bit(s) based on partid_mask in our partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~partid_mask);
+}
+
+
+
+/*
* The following set of macros and inlines are used for the sending and
* receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
* one that is associated with partition activity (SGI_XPC_ACTIVATE) and
@@ -722,13 +995,13 @@ xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
* Flag the appropriate AMO variable and send an IPI to the specified node.
*/
static inline void
-xpc_activate_IRQ_send(u64 amos_page, int from_nasid, int to_nasid,
+xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
int to_phys_cpuid)
{
int w_index = XPC_NASID_W_INDEX(from_nasid);
int b_index = XPC_NASID_B_INDEX(from_nasid);
- AMO_t *amos = (AMO_t *) __va(amos_page +
- (XP_MAX_PARTITIONS * sizeof(AMO_t)));
+ AMO_t *amos = (AMO_t *) __va(amos_page_pa +
+ (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
(void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
@@ -756,6 +1029,13 @@ xpc_IPI_send_reactivate(struct xpc_partition *part)
xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
}
+static inline void
+xpc_IPI_send_disengage(struct xpc_partition *part)
+{
+ xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
+ part->remote_act_nasid, part->remote_act_phys_cpuid);
+}
+
/*
* IPIs associated with SGI_XPC_NOTIFY IRQ.
@@ -836,6 +1116,7 @@ xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
/* given an AMO variable and a channel#, get its associated IPI flags */
#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff))
+#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8))
#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0f)
#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010)
@@ -903,17 +1184,18 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
* cacheable mapping for the entire region. This will prevent speculative
* reading of cached copies of our lines from being issued which will cause
* a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * (XP_MAX_PARTITIONS) AMO variables for message notification (xpc_main.c)
- * and an additional 16 AMO variables for partition activation (xpc_hb.c).
+ * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
+ * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
+ * activation and 2 AMO variables for partition deactivation.
*/
static inline AMO_t *
-xpc_IPI_init(partid_t partid)
+xpc_IPI_init(int index)
{
- AMO_t *part_amo = xpc_vars->amos_page + partid;
+ AMO_t *amo = xpc_vars->amos_page + index;
- xpc_IPI_receive(part_amo);
- return part_amo;
+ (void) xpc_IPI_receive(amo); /* clear AMO variable */
+ return amo;
}
@@ -939,7 +1221,7 @@ xpc_map_bte_errors(bte_result_t error)
static inline void *
-xpc_kmalloc_cacheline_aligned(size_t size, int flags, void **base)
+xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
{
/* see if kmalloc will give us cachline aligned memory by default */
*base = kmalloc(size, flags);
diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c
index 94698bea7be0..abf4fc2a87bb 100644
--- a/arch/ia64/sn/kernel/xpc_channel.c
+++ b/arch/ia64/sn/kernel/xpc_channel.c
@@ -57,6 +57,7 @@ xpc_initialize_channels(struct xpc_partition *part, partid_t partid)
spin_lock_init(&ch->lock);
sema_init(&ch->msg_to_pull_sema, 1); /* mutex */
+ sema_init(&ch->wdisconnect_sema, 0); /* event wait */
atomic_set(&ch->n_on_msg_allocate_wq, 0);
init_waitqueue_head(&ch->msg_allocate_wq);
@@ -166,6 +167,7 @@ xpc_setup_infrastructure(struct xpc_partition *part)
xpc_initialize_channels(part, partid);
atomic_set(&part->nchannels_active, 0);
+ atomic_set(&part->nchannels_engaged, 0);
/* local_IPI_amo were set to 0 by an earlier memset() */
@@ -555,8 +557,6 @@ xpc_allocate_msgqueues(struct xpc_channel *ch)
sema_init(&ch->notify_queue[i].sema, 0);
}
- sema_init(&ch->teardown_sema, 0); /* event wait */
-
spin_lock_irqsave(&ch->lock, irq_flags);
ch->flags |= XPC_C_SETUP;
spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -626,6 +626,55 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
/*
+ * Notify those who wanted to be notified upon delivery of their message.
+ */
+static void
+xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
+{
+ struct xpc_notify *notify;
+ u8 notify_type;
+ s64 get = ch->w_remote_GP.get - 1;
+
+
+ while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
+
+ notify = &ch->notify_queue[get % ch->local_nentries];
+
+ /*
+ * See if the notify entry indicates it was associated with
+ * a message who's sender wants to be notified. It is possible
+ * that it is, but someone else is doing or has done the
+ * notification.
+ */
+ notify_type = notify->type;
+ if (notify_type == 0 ||
+ cmpxchg(&notify->type, notify_type, 0) !=
+ notify_type) {
+ continue;
+ }
+
+ DBUG_ON(notify_type != XPC_N_CALL);
+
+ atomic_dec(&ch->n_to_notify);
+
+ if (notify->func != NULL) {
+ dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
+ "msg_number=%ld, partid=%d, channel=%d\n",
+ (void *) notify, get, ch->partid, ch->number);
+
+ notify->func(reason, ch->partid, ch->number,
+ notify->key);
+
+ dev_dbg(xpc_chan, "notify->func() returned, "
+ "notify=0x%p, msg_number=%ld, partid=%d, "
+ "channel=%d\n", (void *) notify, get,
+ ch->partid, ch->number);
+ }
+ }
+}
+
+
+/*
* Free up message queues and other stuff that were allocated for the specified
* channel.
*
@@ -669,9 +718,6 @@ xpc_free_msgqueues(struct xpc_channel *ch)
ch->remote_msgqueue = NULL;
kfree(ch->notify_queue);
ch->notify_queue = NULL;
-
- /* in case someone is waiting for the teardown to complete */
- up(&ch->teardown_sema);
}
}
@@ -683,7 +729,7 @@ static void
xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
{
struct xpc_partition *part = &xpc_partitions[ch->partid];
- u32 ch_flags = ch->flags;
+ u32 channel_was_connected = (ch->flags & XPC_C_WASCONNECTED);
DBUG_ON(!spin_is_locked(&ch->lock));
@@ -701,12 +747,13 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
}
DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0);
- /* it's now safe to free the channel's message queues */
-
- xpc_free_msgqueues(ch);
- DBUG_ON(ch->flags & XPC_C_SETUP);
+ if (part->act_state == XPC_P_DEACTIVATING) {
+ /* can't proceed until the other side disengages from us */
+ if (xpc_partition_engaged(1UL << ch->partid)) {
+ return;
+ }
- if (part->act_state != XPC_P_DEACTIVATING) {
+ } else {
/* as long as the other side is up do the full protocol */
@@ -724,16 +771,42 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
}
}
+ /* wake those waiting for notify completion */
+ if (atomic_read(&ch->n_to_notify) > 0) {
+ /* >>> we do callout while holding ch->lock */
+ xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
+ }
+
/* both sides are disconnected now */
- ch->flags = XPC_C_DISCONNECTED; /* clear all flags, but this one */
+ /* it's now safe to free the channel's message queues */
+ xpc_free_msgqueues(ch);
+
+ /* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
+ ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
atomic_dec(&part->nchannels_active);
- if (ch_flags & XPC_C_WASCONNECTED) {
+ if (channel_was_connected) {
dev_info(xpc_chan, "channel %d to partition %d disconnected, "
"reason=%d\n", ch->number, ch->partid, ch->reason);
}
+
+ if (ch->flags & XPC_C_WDISCONNECT) {
+ spin_unlock_irqrestore(&ch->lock, *irq_flags);
+ up(&ch->wdisconnect_sema);
+ spin_lock_irqsave(&ch->lock, *irq_flags);
+
+ } else if (ch->delayed_IPI_flags) {
+ if (part->act_state != XPC_P_DEACTIVATING) {
+ /* time to take action on any delayed IPI flags */
+ spin_lock(&part->IPI_lock);
+ XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
+ ch->delayed_IPI_flags);
+ spin_unlock(&part->IPI_lock);
+ }
+ ch->delayed_IPI_flags = 0;
+ }
}
@@ -754,6 +827,19 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
spin_lock_irqsave(&ch->lock, irq_flags);
+again:
+
+ if ((ch->flags & XPC_C_DISCONNECTED) &&
+ (ch->flags & XPC_C_WDISCONNECT)) {
+ /*
+ * Delay processing IPI flags until thread waiting disconnect
+ * has had a chance to see that the channel is disconnected.
+ */
+ ch->delayed_IPI_flags |= IPI_flags;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
+
if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
@@ -764,7 +850,7 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
/*
* If RCLOSEREQUEST is set, we're probably waiting for
* RCLOSEREPLY. We should find it and a ROPENREQUEST packed
- * with this RCLOSEQREUQEST in the IPI_flags.
+ * with this RCLOSEREQUEST in the IPI_flags.
*/
if (ch->flags & XPC_C_RCLOSEREQUEST) {
@@ -779,14 +865,22 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
/* both sides have finished disconnecting */
xpc_process_disconnect(ch, &irq_flags);
+ DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
+ goto again;
}
if (ch->flags & XPC_C_DISCONNECTED) {
- // >>> explain this section
-
if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
- DBUG_ON(part->act_state !=
- XPC_P_DEACTIVATING);
+ if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
+ ch_number) & XPC_IPI_OPENREQUEST)) {
+
+ DBUG_ON(ch->delayed_IPI_flags != 0);
+ spin_lock(&part->IPI_lock);
+ XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+ ch_number,
+ XPC_IPI_CLOSEREQUEST);
+ spin_unlock(&part->IPI_lock);
+ }
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
@@ -816,9 +910,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
}
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
- } else {
- xpc_process_disconnect(ch, &irq_flags);
+
+ DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
}
+
+ xpc_process_disconnect(ch, &irq_flags);
}
@@ -834,7 +932,20 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
}
DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
- DBUG_ON(!(ch->flags & XPC_C_RCLOSEREQUEST));
+
+ if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
+ if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
+ & XPC_IPI_CLOSEREQUEST)) {
+
+ DBUG_ON(ch->delayed_IPI_flags != 0);
+ spin_lock(&part->IPI_lock);
+ XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+ ch_number, XPC_IPI_CLOSEREPLY);
+ spin_unlock(&part->IPI_lock);
+ }
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
ch->flags |= XPC_C_RCLOSEREPLY;
@@ -852,8 +963,14 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
"channel=%d\n", args->msg_size, args->local_nentries,
ch->partid, ch->number);
- if ((ch->flags & XPC_C_DISCONNECTING) ||
- part->act_state == XPC_P_DEACTIVATING) {
+ if (part->act_state == XPC_P_DEACTIVATING ||
+ (ch->flags & XPC_C_ROPENREQUEST)) {
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
+
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
+ ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
@@ -867,8 +984,11 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
* msg_size = size of channel's messages in bytes
* local_nentries = remote partition's local_nentries
*/
- DBUG_ON(args->msg_size == 0);
- DBUG_ON(args->local_nentries == 0);
+ if (args->msg_size == 0 || args->local_nentries == 0) {
+ /* assume OPENREQUEST was delayed by mistake */
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
ch->remote_nentries = args->local_nentries;
@@ -906,7 +1026,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
- DBUG_ON(!(ch->flags & XPC_C_OPENREQUEST));
+ if (!(ch->flags & XPC_C_OPENREQUEST)) {
+ XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError,
+ &irq_flags);
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ return;
+ }
+
DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
DBUG_ON(ch->flags & XPC_C_CONNECTED);
@@ -960,8 +1086,8 @@ xpc_connect_channel(struct xpc_channel *ch)
struct xpc_registration *registration = &xpc_registrations[ch->number];
- if (down_interruptible(&registration->sema) != 0) {
- return xpcInterrupted;
+ if (down_trylock(&registration->sema) != 0) {
+ return xpcRetry;
}
if (!XPC_CHANNEL_REGISTERED(ch->number)) {
@@ -1040,55 +1166,6 @@ xpc_connect_channel(struct xpc_channel *ch)
/*
- * Notify those who wanted to be notified upon delivery of their message.
- */
-static void
-xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
-{
- struct xpc_notify *notify;
- u8 notify_type;
- s64 get = ch->w_remote_GP.get - 1;
-
-
- while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
-
- notify = &ch->notify_queue[get % ch->local_nentries];
-
- /*
- * See if the notify entry indicates it was associated with
- * a message who's sender wants to be notified. It is possible
- * that it is, but someone else is doing or has done the
- * notification.
- */
- notify_type = notify->type;
- if (notify_type == 0 ||
- cmpxchg(&notify->type, notify_type, 0) !=
- notify_type) {
- continue;
- }
-
- DBUG_ON(notify_type != XPC_N_CALL);
-
- atomic_dec(&ch->n_to_notify);
-
- if (notify->func != NULL) {
- dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
- "msg_number=%ld, partid=%d, channel=%d\n",
- (void *) notify, get, ch->partid, ch->number);
-
- notify->func(reason, ch->partid, ch->number,
- notify->key);
-
- dev_dbg(xpc_chan, "notify->func() returned, "
- "notify=0x%p, msg_number=%ld, partid=%d, "
- "channel=%d\n", (void *) notify, get,
- ch->partid, ch->number);
- }
- }
-}
-
-
-/*
* Clear some of the msg flags in the local message queue.
*/
static inline void
@@ -1240,6 +1317,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
u64 IPI_amo, IPI_flags;
struct xpc_channel *ch;
int ch_number;
+ u32 ch_flags;
IPI_amo = xpc_get_IPI_flags(part);
@@ -1266,8 +1344,9 @@ xpc_process_channel_activity(struct xpc_partition *part)
xpc_process_openclose_IPI(part, ch_number, IPI_flags);
}
+ ch_flags = ch->flags; /* need an atomic snapshot of flags */
- if (ch->flags & XPC_C_DISCONNECTING) {
+ if (ch_flags & XPC_C_DISCONNECTING) {
spin_lock_irqsave(&ch->lock, irq_flags);
xpc_process_disconnect(ch, &irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1278,9 +1357,9 @@ xpc_process_channel_activity(struct xpc_partition *part)
continue;
}
- if (!(ch->flags & XPC_C_CONNECTED)) {
- if (!(ch->flags & XPC_C_OPENREQUEST)) {
- DBUG_ON(ch->flags & XPC_C_SETUP);
+ if (!(ch_flags & XPC_C_CONNECTED)) {
+ if (!(ch_flags & XPC_C_OPENREQUEST)) {
+ DBUG_ON(ch_flags & XPC_C_SETUP);
(void) xpc_connect_channel(ch);
} else {
spin_lock_irqsave(&ch->lock, irq_flags);
@@ -1305,8 +1384,8 @@ xpc_process_channel_activity(struct xpc_partition *part)
/*
- * XPC's heartbeat code calls this function to inform XPC that a partition has
- * gone down. XPC responds by tearing down the XPartition Communication
+ * XPC's heartbeat code calls this function to inform XPC that a partition is
+ * going down. XPC responds by tearing down the XPartition Communication
* infrastructure used for the just downed partition.
*
* XPC's heartbeat code will never call this function and xpc_partition_up()
@@ -1314,7 +1393,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
* at the same time.
*/
void
-xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason)
+xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason)
{
unsigned long irq_flags;
int ch_number;
@@ -1330,12 +1409,11 @@ xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason)
}
- /* disconnect all channels associated with the downed partition */
+ /* disconnect channels associated with the partition going down */
for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
ch = &part->channels[ch_number];
-
xpc_msgqueue_ref(ch);
spin_lock_irqsave(&ch->lock, irq_flags);
@@ -1370,6 +1448,7 @@ xpc_teardown_infrastructure(struct xpc_partition *part)
* this partition.
*/
+ DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
DBUG_ON(atomic_read(&part->nchannels_active) != 0);
DBUG_ON(part->setup_state != XPC_P_SETUP);
part->setup_state = XPC_P_WTEARDOWN;
@@ -1428,19 +1507,11 @@ xpc_initiate_connect(int ch_number)
if (xpc_part_ref(part)) {
ch = &part->channels[ch_number];
- if (!(ch->flags & XPC_C_DISCONNECTING)) {
- DBUG_ON(ch->flags & XPC_C_OPENREQUEST);
- DBUG_ON(ch->flags & XPC_C_CONNECTED);
- DBUG_ON(ch->flags & XPC_C_SETUP);
-
- /*
- * Initiate the establishment of a connection
- * on the newly registered channel to the
- * remote partition.
- */
- xpc_wakeup_channel_mgr(part);
- }
-
+ /*
+ * Initiate the establishment of a connection on the
+ * newly registered channel to the remote partition.
+ */
+ xpc_wakeup_channel_mgr(part);
xpc_part_deref(part);
}
}
@@ -1450,9 +1521,6 @@ xpc_initiate_connect(int ch_number)
void
xpc_connected_callout(struct xpc_channel *ch)
{
- unsigned long irq_flags;
-
-
/* let the registerer know that a connection has been established */
if (ch->func != NULL) {
@@ -1465,10 +1533,6 @@ xpc_connected_callout(struct xpc_channel *ch)
dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, "
"partid=%d, channel=%d\n", ch->partid, ch->number);
}
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- ch->flags |= XPC_C_CONNECTCALLOUT;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
}
@@ -1506,8 +1570,12 @@ xpc_initiate_disconnect(int ch_number)
spin_lock_irqsave(&ch->lock, irq_flags);
- XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
+ if (!(ch->flags & XPC_C_DISCONNECTED)) {
+ ch->flags |= XPC_C_WDISCONNECT;
+
+ XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
&irq_flags);
+ }
spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1523,8 +1591,9 @@ xpc_initiate_disconnect(int ch_number)
/*
* To disconnect a channel, and reflect it back to all who may be waiting.
*
- * >>> An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
- * >>> xpc_free_msgqueues().
+ * An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
+ * xpc_process_disconnect(), and if set, XPC_C_WDISCONNECT is cleared by
+ * xpc_disconnect_wait().
*
* THE CHANNEL IS TO BE LOCKED BY THE CALLER AND WILL REMAIN LOCKED UPON RETURN.
*/
@@ -1532,7 +1601,7 @@ void
xpc_disconnect_channel(const int line, struct xpc_channel *ch,
enum xpc_retval reason, unsigned long *irq_flags)
{
- u32 flags;
+ u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED);
DBUG_ON(!spin_is_locked(&ch->lock));
@@ -1547,61 +1616,53 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
XPC_SET_REASON(ch, reason, line);
- flags = ch->flags;
+ ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
/* some of these may not have been set */
ch->flags &= ~(XPC_C_OPENREQUEST | XPC_C_OPENREPLY |
XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
XPC_C_CONNECTING | XPC_C_CONNECTED);
- ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
xpc_IPI_send_closerequest(ch, irq_flags);
- if (flags & XPC_C_CONNECTED) {
+ if (channel_was_connected) {
ch->flags |= XPC_C_WASCONNECTED;
}
+ spin_unlock_irqrestore(&ch->lock, *irq_flags);
+
+ /* wake all idle kthreads so they can exit */
if (atomic_read(&ch->kthreads_idle) > 0) {
- /* wake all idle kthreads so they can exit */
wake_up_all(&ch->idle_wq);
}
- spin_unlock_irqrestore(&ch->lock, *irq_flags);
-
-
/* wake those waiting to allocate an entry from the local msg queue */
-
if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) {
wake_up(&ch->msg_allocate_wq);
}
- /* wake those waiting for notify completion */
-
- if (atomic_read(&ch->n_to_notify) > 0) {
- xpc_notify_senders(ch, reason, ch->w_local_GP.put);
- }
-
spin_lock_irqsave(&ch->lock, *irq_flags);
}
void
-xpc_disconnected_callout(struct xpc_channel *ch)
+xpc_disconnecting_callout(struct xpc_channel *ch)
{
/*
- * Let the channel's registerer know that the channel is now
+ * Let the channel's registerer know that the channel is being
* disconnected. We don't want to do this if the registerer was never
- * informed of a connection being made, unless the disconnect was for
- * abnormal reasons.
+ * informed of a connection being made.
*/
if (ch->func != NULL) {
- dev_dbg(xpc_chan, "ch->func() called, reason=%d, partid=%d, "
- "channel=%d\n", ch->reason, ch->partid, ch->number);
+ dev_dbg(xpc_chan, "ch->func() called, reason=xpcDisconnecting,"
+ " partid=%d, channel=%d\n", ch->partid, ch->number);
- ch->func(ch->reason, ch->partid, ch->number, NULL, ch->key);
+ ch->func(xpcDisconnecting, ch->partid, ch->number, NULL,
+ ch->key);
- dev_dbg(xpc_chan, "ch->func() returned, reason=%d, partid=%d, "
- "channel=%d\n", ch->reason, ch->partid, ch->number);
+ dev_dbg(xpc_chan, "ch->func() returned, reason="
+ "xpcDisconnecting, partid=%d, channel=%d\n",
+ ch->partid, ch->number);
}
}
@@ -1848,7 +1909,7 @@ xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
xpc_notify_func func, void *key)
{
enum xpc_retval ret = xpcSuccess;
- struct xpc_notify *notify = NULL; // >>> to keep the compiler happy!!
+ struct xpc_notify *notify = notify;
s64 put, msg_number = msg->number;
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index ed7c21586e98..cece3c7c69be 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -54,6 +54,7 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/reboot.h>
#include <asm/sn/intr.h>
#include <asm/sn/sn_sal.h>
#include <asm/uaccess.h>
@@ -82,11 +83,17 @@ struct device *xpc_chan = &xpc_chan_dbg_subname;
/* systune related variables for /proc/sys directories */
-static int xpc_hb_min = 1;
-static int xpc_hb_max = 10;
+static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
+static int xpc_hb_min_interval = 1;
+static int xpc_hb_max_interval = 10;
-static int xpc_hb_check_min = 10;
-static int xpc_hb_check_max = 120;
+static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
+static int xpc_hb_check_min_interval = 10;
+static int xpc_hb_check_max_interval = 120;
+
+int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
+static int xpc_disengage_request_min_timelimit = 0;
+static int xpc_disengage_request_max_timelimit = 120;
static ctl_table xpc_sys_xpc_hb_dir[] = {
{
@@ -99,7 +106,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = {
&proc_dointvec_minmax,
&sysctl_intvec,
NULL,
- &xpc_hb_min, &xpc_hb_max
+ &xpc_hb_min_interval,
+ &xpc_hb_max_interval
},
{
2,
@@ -111,7 +119,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = {
&proc_dointvec_minmax,
&sysctl_intvec,
NULL,
- &xpc_hb_check_min, &xpc_hb_check_max
+ &xpc_hb_check_min_interval,
+ &xpc_hb_check_max_interval
},
{0}
};
@@ -124,6 +133,19 @@ static ctl_table xpc_sys_xpc_dir[] = {
0555,
xpc_sys_xpc_hb_dir
},
+ {
+ 2,
+ "disengage_request_timelimit",
+ &xpc_disengage_request_timelimit,
+ sizeof(int),
+ 0644,
+ NULL,
+ &proc_dointvec_minmax,
+ &sysctl_intvec,
+ NULL,
+ &xpc_disengage_request_min_timelimit,
+ &xpc_disengage_request_max_timelimit
+ },
{0}
};
static ctl_table xpc_sys_dir[] = {
@@ -148,10 +170,10 @@ static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
static unsigned long xpc_hb_check_timeout;
-/* xpc_hb_checker thread exited notification */
+/* notification that the xpc_hb_checker thread has exited */
static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited);
-/* xpc_discovery thread exited notification */
+/* notification that the xpc_discovery thread has exited */
static DECLARE_MUTEX_LOCKED(xpc_discovery_exited);
@@ -161,6 +183,30 @@ static struct timer_list xpc_hb_timer;
static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
+static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
+static struct notifier_block xpc_reboot_notifier = {
+ .notifier_call = xpc_system_reboot,
+};
+
+
+/*
+ * Timer function to enforce the timelimit on the partition disengage request.
+ */
+static void
+xpc_timeout_partition_disengage_request(unsigned long data)
+{
+ struct xpc_partition *part = (struct xpc_partition *) data;
+
+
+ DBUG_ON(jiffies < part->disengage_request_timeout);
+
+ (void) xpc_partition_disengaged(part);
+
+ DBUG_ON(part->disengage_request_timeout != 0);
+ DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
+}
+
+
/*
* Notify the heartbeat check thread that an IRQ has been received.
*/
@@ -214,12 +260,6 @@ xpc_hb_checker(void *ignore)
while (!(volatile int) xpc_exiting) {
- /* wait for IRQ or timeout */
- (void) wait_event_interruptible(xpc_act_IRQ_wq,
- (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
- jiffies >= xpc_hb_check_timeout ||
- (volatile int) xpc_exiting));
-
dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
"been received\n",
(int) (xpc_hb_check_timeout - jiffies),
@@ -240,6 +280,7 @@ xpc_hb_checker(void *ignore)
}
+ /* check for outstanding IRQs */
new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
force_IRQ = 0;
@@ -257,12 +298,18 @@ xpc_hb_checker(void *ignore)
xpc_hb_check_timeout = jiffies +
(xpc_hb_check_interval * HZ);
}
+
+ /* wait for IRQ or timeout */
+ (void) wait_event_interruptible(xpc_act_IRQ_wq,
+ (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
+ jiffies >= xpc_hb_check_timeout ||
+ (volatile int) xpc_exiting));
}
dev_dbg(xpc_part, "heartbeat checker is exiting\n");
- /* mark this thread as inactive */
+ /* mark this thread as having exited */
up(&xpc_hb_checker_exited);
return 0;
}
@@ -282,7 +329,7 @@ xpc_initiate_discovery(void *ignore)
dev_dbg(xpc_part, "discovery thread is exiting\n");
- /* mark this thread as inactive */
+ /* mark this thread as having exited */
up(&xpc_discovery_exited);
return 0;
}
@@ -309,7 +356,7 @@ xpc_make_first_contact(struct xpc_partition *part)
"partition %d\n", XPC_PARTID(part));
/* wait a 1/4 of a second or so */
- msleep_interruptible(250);
+ (void) msleep_interruptible(250);
if (part->act_state == XPC_P_DEACTIVATING) {
return part->reason;
@@ -336,7 +383,8 @@ static void
xpc_channel_mgr(struct xpc_partition *part)
{
while (part->act_state != XPC_P_DEACTIVATING ||
- atomic_read(&part->nchannels_active) > 0) {
+ atomic_read(&part->nchannels_active) > 0 ||
+ !xpc_partition_disengaged(part)) {
xpc_process_channel_activity(part);
@@ -360,7 +408,8 @@ xpc_channel_mgr(struct xpc_partition *part)
(volatile u64) part->local_IPI_amo != 0 ||
((volatile u8) part->act_state ==
XPC_P_DEACTIVATING &&
- atomic_read(&part->nchannels_active) == 0)));
+ atomic_read(&part->nchannels_active) == 0 &&
+ xpc_partition_disengaged(part))));
atomic_set(&part->channel_mgr_requests, 1);
// >>> Does it need to wakeup periodically as well? In case we
@@ -482,7 +531,7 @@ xpc_activating(void *__partid)
return 0;
}
- XPC_ALLOW_HB(partid, xpc_vars);
+ xpc_allow_hb(partid, xpc_vars);
xpc_IPI_send_activated(part);
@@ -492,6 +541,7 @@ xpc_activating(void *__partid)
*/
(void) xpc_partition_up(part);
+ xpc_disallow_hb(partid, xpc_vars);
xpc_mark_partition_inactive(part);
if (part->reason == xpcReactivating) {
@@ -670,6 +720,7 @@ xpc_daemonize_kthread(void *args)
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_channel *ch;
int n_needed;
+ unsigned long irq_flags;
daemonize("xpc%02dc%d", partid, ch_number);
@@ -680,11 +731,14 @@ xpc_daemonize_kthread(void *args)
ch = &part->channels[ch_number];
if (!(ch->flags & XPC_C_DISCONNECTING)) {
- DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
/* let registerer know that connection has been established */
- if (atomic_read(&ch->kthreads_assigned) == 1) {
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ if (!(ch->flags & XPC_C_CONNECTCALLOUT)) {
+ ch->flags |= XPC_C_CONNECTCALLOUT;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+
xpc_connected_callout(ch);
/*
@@ -699,16 +753,28 @@ xpc_daemonize_kthread(void *args)
!(ch->flags & XPC_C_DISCONNECTING)) {
xpc_activate_kthreads(ch, n_needed);
}
+ } else {
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
}
xpc_kthread_waitmsgs(part, ch);
}
- if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
- ((ch->flags & XPC_C_CONNECTCALLOUT) ||
- (ch->reason != xpcUnregistering &&
- ch->reason != xpcOtherUnregistering))) {
- xpc_disconnected_callout(ch);
+ if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ if ((ch->flags & XPC_C_CONNECTCALLOUT) &&
+ !(ch->flags & XPC_C_DISCONNECTCALLOUT)) {
+ ch->flags |= XPC_C_DISCONNECTCALLOUT;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ xpc_disconnecting_callout(ch);
+ } else {
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+ }
+ if (atomic_dec_return(&part->nchannels_engaged) == 0) {
+ xpc_mark_partition_disengaged(part);
+ xpc_IPI_send_disengage(part);
+ }
}
@@ -740,12 +806,33 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
unsigned long irq_flags;
pid_t pid;
u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
+ struct xpc_partition *part = &xpc_partitions[ch->partid];
while (needed-- > 0) {
+
+ /*
+ * The following is done on behalf of the newly created
+ * kthread. That kthread is responsible for doing the
+ * counterpart to the following before it exits.
+ */
+ (void) xpc_part_ref(part);
+ xpc_msgqueue_ref(ch);
+ if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
+ atomic_inc_return(&part->nchannels_engaged) == 1) {
+ xpc_mark_partition_engaged(part);
+ }
+
pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0);
if (pid < 0) {
/* the fork failed */
+ if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
+ atomic_dec_return(&part->nchannels_engaged) == 0) {
+ xpc_mark_partition_disengaged(part);
+ xpc_IPI_send_disengage(part);
+ }
+ xpc_msgqueue_deref(ch);
+ xpc_part_deref(part);
if (atomic_read(&ch->kthreads_assigned) <
ch->kthreads_idle_limit) {
@@ -765,14 +852,6 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
break;
}
- /*
- * The following is done on behalf of the newly created
- * kthread. That kthread is responsible for doing the
- * counterpart to the following before it exits.
- */
- (void) xpc_part_ref(&xpc_partitions[ch->partid]);
- xpc_msgqueue_ref(ch);
- atomic_inc(&ch->kthreads_assigned);
ch->kthreads_created++; // >>> temporary debug only!!!
}
}
@@ -781,87 +860,142 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
void
xpc_disconnect_wait(int ch_number)
{
+ unsigned long irq_flags;
partid_t partid;
struct xpc_partition *part;
struct xpc_channel *ch;
+ int wakeup_channel_mgr;
/* now wait for all callouts to the caller's function to cease */
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
part = &xpc_partitions[partid];
- if (xpc_part_ref(part)) {
- ch = &part->channels[ch_number];
+ if (!xpc_part_ref(part)) {
+ continue;
+ }
-// >>> how do we keep from falling into the window between our check and going
-// >>> down and coming back up where sema is re-inited?
- if (ch->flags & XPC_C_SETUP) {
- (void) down(&ch->teardown_sema);
- }
+ ch = &part->channels[ch_number];
+ if (!(ch->flags & XPC_C_WDISCONNECT)) {
xpc_part_deref(part);
+ continue;
+ }
+
+ (void) down(&ch->wdisconnect_sema);
+
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
+ wakeup_channel_mgr = 0;
+
+ if (ch->delayed_IPI_flags) {
+ if (part->act_state != XPC_P_DEACTIVATING) {
+ spin_lock(&part->IPI_lock);
+ XPC_SET_IPI_FLAGS(part->local_IPI_amo,
+ ch->number, ch->delayed_IPI_flags);
+ spin_unlock(&part->IPI_lock);
+ wakeup_channel_mgr = 1;
+ }
+ ch->delayed_IPI_flags = 0;
}
+
+ ch->flags &= ~XPC_C_WDISCONNECT;
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ if (wakeup_channel_mgr) {
+ xpc_wakeup_channel_mgr(part);
+ }
+
+ xpc_part_deref(part);
}
}
static void
-xpc_do_exit(void)
+xpc_do_exit(enum xpc_retval reason)
{
partid_t partid;
int active_part_count;
struct xpc_partition *part;
+ unsigned long printmsg_time;
- /* now it's time to eliminate our heartbeat */
- del_timer_sync(&xpc_hb_timer);
- xpc_vars->heartbeating_to_mask = 0;
-
- /* indicate to others that our reserved page is uninitialized */
- xpc_rsvd_page->vars_pa = 0;
-
- /*
- * Ignore all incoming interrupts. Without interupts the heartbeat
- * checker won't activate any new partitions that may come up.
- */
- free_irq(SGI_XPC_ACTIVATE, NULL);
+ /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
+ DBUG_ON(xpc_exiting == 1);
/*
- * Cause the heartbeat checker and the discovery threads to exit.
- * We don't want them attempting to activate new partitions as we
- * try to deactivate the existing ones.
+ * Let the heartbeat checker thread and the discovery thread
+ * (if one is running) know that they should exit. Also wake up
+ * the heartbeat checker thread in case it's sleeping.
*/
xpc_exiting = 1;
wake_up_interruptible(&xpc_act_IRQ_wq);
- /* wait for the heartbeat checker thread to mark itself inactive */
- down(&xpc_hb_checker_exited);
+ /* ignore all incoming interrupts */
+ free_irq(SGI_XPC_ACTIVATE, NULL);
- /* wait for the discovery thread to mark itself inactive */
+ /* wait for the discovery thread to exit */
down(&xpc_discovery_exited);
+ /* wait for the heartbeat checker thread to exit */
+ down(&xpc_hb_checker_exited);
- msleep_interruptible(300);
+
+ /* sleep for a 1/3 of a second or so */
+ (void) msleep_interruptible(300);
/* wait for all partitions to become inactive */
+ printmsg_time = jiffies;
+
do {
active_part_count = 0;
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
part = &xpc_partitions[partid];
- if (part->act_state != XPC_P_INACTIVE) {
- active_part_count++;
- XPC_DEACTIVATE_PARTITION(part, xpcUnloading);
+ if (xpc_partition_disengaged(part) &&
+ part->act_state == XPC_P_INACTIVE) {
+ continue;
}
+
+ active_part_count++;
+
+ XPC_DEACTIVATE_PARTITION(part, reason);
}
- if (active_part_count)
- msleep_interruptible(300);
- } while (active_part_count > 0);
+ if (active_part_count == 0) {
+ break;
+ }
+ if (jiffies >= printmsg_time) {
+ dev_info(xpc_part, "waiting for partitions to "
+ "deactivate/disengage, active count=%d, remote "
+ "engaged=0x%lx\n", active_part_count,
+ xpc_partition_engaged(1UL << partid));
+
+ printmsg_time = jiffies +
+ (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+ }
+
+ /* sleep for a 1/3 of a second or so */
+ (void) msleep_interruptible(300);
+
+ } while (1);
+
+ DBUG_ON(xpc_partition_engaged(-1UL));
+
+
+ /* indicate to others that our reserved page is uninitialized */
+ xpc_rsvd_page->vars_pa = 0;
+
+ /* now it's time to eliminate our heartbeat */
+ del_timer_sync(&xpc_hb_timer);
+ DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
+
+ /* take ourselves off of the reboot_notifier_list */
+ (void) unregister_reboot_notifier(&xpc_reboot_notifier);
/* close down protections for IPI operations */
xpc_restrict_IPI_ops();
@@ -876,6 +1010,34 @@ xpc_do_exit(void)
}
+/*
+ * This function is called when the system is being rebooted.
+ */
+static int
+xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
+{
+ enum xpc_retval reason;
+
+
+ switch (event) {
+ case SYS_RESTART:
+ reason = xpcSystemReboot;
+ break;
+ case SYS_HALT:
+ reason = xpcSystemHalt;
+ break;
+ case SYS_POWER_OFF:
+ reason = xpcSystemPoweroff;
+ break;
+ default:
+ reason = xpcSystemGoingDown;
+ }
+
+ xpc_do_exit(reason);
+ return NOTIFY_DONE;
+}
+
+
int __init
xpc_init(void)
{
@@ -891,11 +1053,11 @@ xpc_init(void)
/*
* xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
- * both a partition's reserved page and its XPC variables. Its size was
- * based on the size of a reserved page. So we need to ensure that the
- * XPC variables will fit as well.
+ * various portions of a partition's reserved page. Its size is based
+ * on the size of the reserved page header and part_nasids mask. So we
+ * need to ensure that the other items will fit as well.
*/
- if (XPC_VARS_ALIGNED_SIZE > XPC_RSVD_PAGE_ALIGNED_SIZE) {
+ if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) {
dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n");
return -EPERM;
}
@@ -924,6 +1086,12 @@ xpc_init(void)
spin_lock_init(&part->act_lock);
part->act_state = XPC_P_INACTIVE;
XPC_SET_REASON(part, 0, 0);
+
+ init_timer(&part->disengage_request_timer);
+ part->disengage_request_timer.function =
+ xpc_timeout_partition_disengage_request;
+ part->disengage_request_timer.data = (unsigned long) part;
+
part->setup_state = XPC_P_UNSET;
init_waitqueue_head(&part->teardown_wq);
atomic_set(&part->references, 0);
@@ -980,6 +1148,13 @@ xpc_init(void)
}
+ /* add ourselves to the reboot_notifier_list */
+ ret = register_reboot_notifier(&xpc_reboot_notifier);
+ if (ret != 0) {
+ dev_warn(xpc_part, "can't register reboot notifier\n");
+ }
+
+
/*
* Set the beating to other partitions into motion. This is
* the last requirement for other partitions' discovery to
@@ -1001,6 +1176,9 @@ xpc_init(void)
/* indicate to others that our reserved page is uninitialized */
xpc_rsvd_page->vars_pa = 0;
+ /* take ourselves off of the reboot_notifier_list */
+ (void) unregister_reboot_notifier(&xpc_reboot_notifier);
+
del_timer_sync(&xpc_hb_timer);
free_irq(SGI_XPC_ACTIVATE, NULL);
xpc_restrict_IPI_ops();
@@ -1024,7 +1202,7 @@ xpc_init(void)
/* mark this new thread as a non-starter */
up(&xpc_discovery_exited);
- xpc_do_exit();
+ xpc_do_exit(xpcUnloading);
return -EBUSY;
}
@@ -1043,7 +1221,7 @@ module_init(xpc_init);
void __exit
xpc_exit(void)
{
- xpc_do_exit();
+ xpc_do_exit(xpcUnloading);
}
module_exit(xpc_exit);
@@ -1060,3 +1238,7 @@ module_param(xpc_hb_check_interval, int, 0);
MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
"heartbeat checks.");
+module_param(xpc_disengage_request_timelimit, int, 0);
+MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
+ "for disengage request to complete.");
+
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 578265ea9e67..581e113d2d37 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -44,16 +44,19 @@ static u64 xpc_sh2_IPI_access3;
/* original protection values for each node */
-u64 xpc_prot_vec[MAX_COMPACT_NODES];
+u64 xpc_prot_vec[MAX_NUMNODES];
-/* this partition's reserved page */
+/* this partition's reserved page pointers */
struct xpc_rsvd_page *xpc_rsvd_page;
-
-/* this partition's XPC variables (within the reserved page) */
+static u64 *xpc_part_nasids;
+static u64 *xpc_mach_nasids;
struct xpc_vars *xpc_vars;
struct xpc_vars_part *xpc_vars_part;
+static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */
+static int xp_nasid_mask_words; /* actual size in words of nasid mask */
+
/*
* For performance reasons, each entry of xpc_partitions[] is cacheline
@@ -65,20 +68,16 @@ struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
/*
- * Generic buffer used to store a local copy of the remote partitions
- * reserved page or XPC variables.
+ * Generic buffer used to store a local copy of portions of a remote
+ * partition's reserved page (either its header and part_nasids mask,
+ * or its vars).
*
* xpc_discovery runs only once and is a seperate thread that is
* very likely going to be processing in parallel with receiving
* interrupts.
*/
-char ____cacheline_aligned
- xpc_remote_copy_buffer[XPC_RSVD_PAGE_ALIGNED_SIZE];
-
-
-/* systune related variables */
-int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
-int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT;
+char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
+ XP_NASID_MASK_BYTES];
/*
@@ -86,13 +85,16 @@ int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT;
* for that nasid. This function returns 0 on any error.
*/
static u64
-xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
+xpc_get_rsvd_page_pa(int nasid)
{
bte_result_t bte_res;
s64 status;
u64 cookie = 0;
u64 rp_pa = nasid; /* seed with nasid */
u64 len = 0;
+ u64 buf = buf;
+ u64 buf_len = 0;
+ void *buf_base = NULL;
while (1) {
@@ -108,13 +110,22 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
break;
}
- if (len > buf_size) {
- dev_err(xpc_part, "len (=0x%016lx) > buf_size\n", len);
- status = SALRET_ERROR;
- break;
+ if (L1_CACHE_ALIGN(len) > buf_len) {
+ if (buf_base != NULL) {
+ kfree(buf_base);
+ }
+ buf_len = L1_CACHE_ALIGN(len);
+ buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len,
+ GFP_KERNEL, &buf_base);
+ if (buf_base == NULL) {
+ dev_err(xpc_part, "unable to kmalloc "
+ "len=0x%016lx\n", buf_len);
+ status = SALRET_ERROR;
+ break;
+ }
}
- bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_size,
+ bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bte_res != BTE_SUCCESS) {
dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
@@ -123,6 +134,10 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
}
}
+ if (buf_base != NULL) {
+ kfree(buf_base);
+ }
+
if (status != SALRET_OK) {
rp_pa = 0;
}
@@ -141,15 +156,15 @@ xpc_rsvd_page_init(void)
{
struct xpc_rsvd_page *rp;
AMO_t *amos_page;
- u64 rp_pa, next_cl, nasid_array = 0;
+ u64 rp_pa, nasid_array = 0;
int i, ret;
/* get the local reserved page's address */
- rp_pa = xpc_get_rsvd_page_pa(cnodeid_to_nasid(0),
- (u64) xpc_remote_copy_buffer,
- XPC_RSVD_PAGE_ALIGNED_SIZE);
+ preempt_disable();
+ rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
+ preempt_enable();
if (rp_pa == 0) {
dev_err(xpc_part, "SAL failed to locate the reserved page\n");
return NULL;
@@ -164,12 +179,19 @@ xpc_rsvd_page_init(void)
rp->version = XPC_RP_VERSION;
- /*
- * Place the XPC variables on the cache line following the
- * reserved page structure.
- */
- next_cl = (u64) rp + XPC_RSVD_PAGE_ALIGNED_SIZE;
- xpc_vars = (struct xpc_vars *) next_cl;
+ /* establish the actual sizes of the nasid masks */
+ if (rp->SAL_version == 1) {
+ /* SAL_version 1 didn't set the nasids_size field */
+ rp->nasids_size = 128;
+ }
+ xp_nasid_mask_bytes = rp->nasids_size;
+ xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
+
+ /* setup the pointers to the various items in the reserved page */
+ xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
+ xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
+ xpc_vars = XPC_RP_VARS(rp);
+ xpc_vars_part = XPC_RP_VARS_PART(rp);
/*
* Before clearing xpc_vars, see if a page of AMOs had been previously
@@ -221,33 +243,32 @@ xpc_rsvd_page_init(void)
amos_page = (AMO_t *) TO_AMO((u64) amos_page);
}
+ /* clear xpc_vars */
memset(xpc_vars, 0, sizeof(struct xpc_vars));
- /*
- * Place the XPC per partition specific variables on the cache line
- * following the XPC variables structure.
- */
- next_cl += XPC_VARS_ALIGNED_SIZE;
- memset((u64 *) next_cl, 0, sizeof(struct xpc_vars_part) *
- XP_MAX_PARTITIONS);
- xpc_vars_part = (struct xpc_vars_part *) next_cl;
- xpc_vars->vars_part_pa = __pa(next_cl);
-
xpc_vars->version = XPC_V_VERSION;
xpc_vars->act_nasid = cpuid_to_nasid(0);
xpc_vars->act_phys_cpuid = cpu_physical_id(0);
+ xpc_vars->vars_part_pa = __pa(xpc_vars_part);
+ xpc_vars->amos_page_pa = ia64_tpa((u64) amos_page);
xpc_vars->amos_page = amos_page; /* save for next load of XPC */
- /*
- * Initialize the activation related AMO variables.
- */
- xpc_vars->act_amos = xpc_IPI_init(XP_MAX_PARTITIONS);
- for (i = 1; i < XP_NASID_MASK_WORDS; i++) {
- xpc_IPI_init(i + XP_MAX_PARTITIONS);
+ /* clear xpc_vars_part */
+ memset((u64 *) xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
+ XP_MAX_PARTITIONS);
+
+ /* initialize the activate IRQ related AMO variables */
+ for (i = 0; i < xp_nasid_mask_words; i++) {
+ (void) xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
}
- /* export AMO page's physical address to other partitions */
- xpc_vars->amos_page_pa = ia64_tpa((u64) xpc_vars->amos_page);
+
+ /* initialize the engaged remote partitions related AMO variables */
+ (void) xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
+ (void) xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
+
+ /* timestamp of when reserved page was setup by XPC */
+ rp->stamp = CURRENT_TIME;
/*
* This signifies to the remote partition that our reserved
@@ -387,6 +408,11 @@ xpc_check_remote_hb(void)
remote_vars = (struct xpc_vars *) xpc_remote_copy_buffer;
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+
+ if (xpc_exiting) {
+ break;
+ }
+
if (partid == sn_partition_id) {
continue;
}
@@ -401,7 +427,7 @@ xpc_check_remote_hb(void)
/* pull the remote_hb cache line */
bres = xp_bte_copy(part->remote_vars_pa,
ia64_tpa((u64) remote_vars),
- XPC_VARS_ALIGNED_SIZE,
+ XPC_RP_VARS_SIZE,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bres != BTE_SUCCESS) {
XPC_DEACTIVATE_PARTITION(part,
@@ -417,7 +443,7 @@ xpc_check_remote_hb(void)
if (((remote_vars->heartbeat == part->last_heartbeat) &&
(remote_vars->kdb_status == 0)) ||
- !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
+ !xpc_hb_allowed(sn_partition_id, remote_vars)) {
XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat);
continue;
@@ -429,31 +455,31 @@ xpc_check_remote_hb(void)
/*
- * Get a copy of the remote partition's rsvd page.
+ * Get a copy of a portion of the remote partition's rsvd page.
*
* remote_rp points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_RSVD_PAGE_ALIGNED_SIZE.
+ * is large enough to contain a copy of their reserved page header and
+ * part_nasids mask.
*/
static enum xpc_retval
xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
- struct xpc_rsvd_page *remote_rp, u64 *remote_rsvd_page_pa)
+ struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
{
int bres, i;
/* get the reserved page's physical address */
- *remote_rsvd_page_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp,
- XPC_RSVD_PAGE_ALIGNED_SIZE);
- if (*remote_rsvd_page_pa == 0) {
+ *remote_rp_pa = xpc_get_rsvd_page_pa(nasid);
+ if (*remote_rp_pa == 0) {
return xpcNoRsvdPageAddr;
}
- /* pull over the reserved page structure */
+ /* pull over the reserved page header and part_nasids mask */
- bres = xp_bte_copy(*remote_rsvd_page_pa, ia64_tpa((u64) remote_rp),
- XPC_RSVD_PAGE_ALIGNED_SIZE,
+ bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp),
+ XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bres != BTE_SUCCESS) {
return xpc_map_bte_errors(bres);
@@ -461,8 +487,11 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
if (discovered_nasids != NULL) {
- for (i = 0; i < XP_NASID_MASK_WORDS; i++) {
- discovered_nasids[i] |= remote_rp->part_nasids[i];
+ u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
+
+
+ for (i = 0; i < xp_nasid_mask_words; i++) {
+ discovered_nasids[i] |= remote_part_nasids[i];
}
}
@@ -489,10 +518,10 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
/*
- * Get a copy of the remote partition's XPC variables.
+ * Get a copy of the remote partition's XPC variables from the reserved page.
*
* remote_vars points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_VARS_ALIGNED_SIZE.
+ * assumed to be of size XPC_RP_VARS_SIZE.
*/
static enum xpc_retval
xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
@@ -508,7 +537,7 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
/* pull over the cross partition variables */
bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars),
- XPC_VARS_ALIGNED_SIZE,
+ XPC_RP_VARS_SIZE,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bres != BTE_SUCCESS) {
return xpc_map_bte_errors(bres);
@@ -524,7 +553,56 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
/*
- * Prior code has determine the nasid which generated an IPI. Inspect
+ * Update the remote partition's info.
+ */
+static void
+xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
+ struct timespec *remote_rp_stamp, u64 remote_rp_pa,
+ u64 remote_vars_pa, struct xpc_vars *remote_vars)
+{
+ part->remote_rp_version = remote_rp_version;
+ dev_dbg(xpc_part, " remote_rp_version = 0x%016lx\n",
+ part->remote_rp_version);
+
+ part->remote_rp_stamp = *remote_rp_stamp;
+ dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
+ part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
+
+ part->remote_rp_pa = remote_rp_pa;
+ dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
+
+ part->remote_vars_pa = remote_vars_pa;
+ dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
+ part->remote_vars_pa);
+
+ part->last_heartbeat = remote_vars->heartbeat;
+ dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
+ part->last_heartbeat);
+
+ part->remote_vars_part_pa = remote_vars->vars_part_pa;
+ dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n",
+ part->remote_vars_part_pa);
+
+ part->remote_act_nasid = remote_vars->act_nasid;
+ dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n",
+ part->remote_act_nasid);
+
+ part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
+ dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n",
+ part->remote_act_phys_cpuid);
+
+ part->remote_amos_page_pa = remote_vars->amos_page_pa;
+ dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n",
+ part->remote_amos_page_pa);
+
+ part->remote_vars_version = remote_vars->version;
+ dev_dbg(xpc_part, " remote_vars_version = 0x%x\n",
+ part->remote_vars_version);
+}
+
+
+/*
+ * Prior code has determined the nasid which generated an IPI. Inspect
* that nasid to determine if its partition needs to be activated or
* deactivated.
*
@@ -542,8 +620,12 @@ xpc_identify_act_IRQ_req(int nasid)
{
struct xpc_rsvd_page *remote_rp;
struct xpc_vars *remote_vars;
- u64 remote_rsvd_page_pa;
+ u64 remote_rp_pa;
u64 remote_vars_pa;
+ int remote_rp_version;
+ int reactivate = 0;
+ int stamp_diff;
+ struct timespec remote_rp_stamp = { 0, 0 };
partid_t partid;
struct xpc_partition *part;
enum xpc_retval ret;
@@ -553,7 +635,7 @@ xpc_identify_act_IRQ_req(int nasid)
remote_rp = (struct xpc_rsvd_page *) xpc_remote_copy_buffer;
- ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rsvd_page_pa);
+ ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
if (ret != xpcSuccess) {
dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
"which sent interrupt, reason=%d\n", nasid, ret);
@@ -561,6 +643,10 @@ xpc_identify_act_IRQ_req(int nasid)
}
remote_vars_pa = remote_rp->vars_pa;
+ remote_rp_version = remote_rp->version;
+ if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+ remote_rp_stamp = remote_rp->stamp;
+ }
partid = remote_rp->partid;
part = &xpc_partitions[partid];
@@ -586,44 +672,117 @@ xpc_identify_act_IRQ_req(int nasid)
"%ld:0x%lx\n", (int) nasid, (int) partid, part->act_IRQ_rcvd,
remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
+ if (xpc_partition_disengaged(part) &&
+ part->act_state == XPC_P_INACTIVE) {
- if (part->act_state == XPC_P_INACTIVE) {
+ xpc_update_partition_info(part, remote_rp_version,
+ &remote_rp_stamp, remote_rp_pa,
+ remote_vars_pa, remote_vars);
- part->remote_rp_pa = remote_rsvd_page_pa;
- dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n",
- part->remote_rp_pa);
+ if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+ if (xpc_partition_disengage_requested(1UL << partid)) {
+ /*
+ * Other side is waiting on us to disengage,
+ * even though we already have.
+ */
+ return;
+ }
+ } else {
+ /* other side doesn't support disengage requests */
+ xpc_clear_partition_disengage_request(1UL << partid);
+ }
- part->remote_vars_pa = remote_vars_pa;
- dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
- part->remote_vars_pa);
+ xpc_activate_partition(part);
+ return;
+ }
- part->last_heartbeat = remote_vars->heartbeat;
- dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
- part->last_heartbeat);
+ DBUG_ON(part->remote_rp_version == 0);
+ DBUG_ON(part->remote_vars_version == 0);
+
+ if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
+ DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
+ remote_vars_version));
+
+ if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+ DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
+ version));
+ /* see if the other side rebooted */
+ if (part->remote_amos_page_pa ==
+ remote_vars->amos_page_pa &&
+ xpc_hb_allowed(sn_partition_id,
+ remote_vars)) {
+ /* doesn't look that way, so ignore the IPI */
+ return;
+ }
+ }
- part->remote_vars_part_pa = remote_vars->vars_part_pa;
- dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n",
- part->remote_vars_part_pa);
+ /*
+ * Other side rebooted and previous XPC didn't support the
+ * disengage request, so we don't need to do anything special.
+ */
- part->remote_act_nasid = remote_vars->act_nasid;
- dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n",
- part->remote_act_nasid);
+ xpc_update_partition_info(part, remote_rp_version,
+ &remote_rp_stamp, remote_rp_pa,
+ remote_vars_pa, remote_vars);
+ part->reactivate_nasid = nasid;
+ XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+ return;
+ }
- part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
- dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n",
- part->remote_act_phys_cpuid);
+ DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
- part->remote_amos_page_pa = remote_vars->amos_page_pa;
- dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n",
- part->remote_amos_page_pa);
+ if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
+ DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
- xpc_activate_partition(part);
+ /*
+ * Other side rebooted and previous XPC did support the
+ * disengage request, but the new one doesn't.
+ */
+
+ xpc_clear_partition_engaged(1UL << partid);
+ xpc_clear_partition_disengage_request(1UL << partid);
- } else if (part->remote_amos_page_pa != remote_vars->amos_page_pa ||
- !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
+ xpc_update_partition_info(part, remote_rp_version,
+ &remote_rp_stamp, remote_rp_pa,
+ remote_vars_pa, remote_vars);
+ reactivate = 1;
+
+ } else {
+ DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
+ stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
+ &remote_rp_stamp);
+ if (stamp_diff != 0) {
+ DBUG_ON(stamp_diff >= 0);
+
+ /*
+ * Other side rebooted and the previous XPC did support
+ * the disengage request, as does the new one.
+ */
+
+ DBUG_ON(xpc_partition_engaged(1UL << partid));
+ DBUG_ON(xpc_partition_disengage_requested(1UL <<
+ partid));
+
+ xpc_update_partition_info(part, remote_rp_version,
+ &remote_rp_stamp, remote_rp_pa,
+ remote_vars_pa, remote_vars);
+ reactivate = 1;
+ }
+ }
+
+ if (!xpc_partition_disengaged(part)) {
+ /* still waiting on other side to disengage from us */
+ return;
+ }
+
+ if (reactivate) {
part->reactivate_nasid = nasid;
XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+
+ } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
+ xpc_partition_disengage_requested(1UL << partid)) {
+ XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown);
}
}
@@ -643,14 +802,17 @@ xpc_identify_act_IRQ_sender(void)
u64 nasid; /* remote nasid */
int n_IRQs_detected = 0;
AMO_t *act_amos;
- struct xpc_rsvd_page *rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
- act_amos = xpc_vars->act_amos;
+ act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
/* scan through act AMO variable looking for non-zero entries */
- for (word = 0; word < XP_NASID_MASK_WORDS; word++) {
+ for (word = 0; word < xp_nasid_mask_words; word++) {
+
+ if (xpc_exiting) {
+ break;
+ }
nasid_mask = xpc_IPI_receive(&act_amos[word]);
if (nasid_mask == 0) {
@@ -668,7 +830,7 @@ xpc_identify_act_IRQ_sender(void)
* remote nasid in our reserved pages machine mask.
* This is used in the event of module reload.
*/
- rp->mach_nasids[word] |= nasid_mask;
+ xpc_mach_nasids[word] |= nasid_mask;
/* locate the nasid(s) which sent interrupts */
@@ -688,6 +850,55 @@ xpc_identify_act_IRQ_sender(void)
/*
+ * See if the other side has responded to a partition disengage request
+ * from us.
+ */
+int
+xpc_partition_disengaged(struct xpc_partition *part)
+{
+ partid_t partid = XPC_PARTID(part);
+ int disengaged;
+
+
+ disengaged = (xpc_partition_engaged(1UL << partid) == 0);
+ if (part->disengage_request_timeout) {
+ if (!disengaged) {
+ if (jiffies < part->disengage_request_timeout) {
+ /* timelimit hasn't been reached yet */
+ return 0;
+ }
+
+ /*
+ * Other side hasn't responded to our disengage
+ * request in a timely fashion, so assume it's dead.
+ */
+
+ xpc_clear_partition_engaged(1UL << partid);
+ disengaged = 1;
+ }
+ part->disengage_request_timeout = 0;
+
+ /* cancel the timer function, provided it's not us */
+ if (!in_interrupt()) {
+ del_singleshot_timer_sync(&part->
+ disengage_request_timer);
+ }
+
+ DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
+ part->act_state != XPC_P_INACTIVE);
+ if (part->act_state != XPC_P_INACTIVE) {
+ xpc_wakeup_channel_mgr(part);
+ }
+
+ if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+ xpc_cancel_partition_disengage_request(part);
+ }
+ }
+ return disengaged;
+}
+
+
+/*
* Mark specified partition as active.
*/
enum xpc_retval
@@ -721,7 +932,6 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
enum xpc_retval reason)
{
unsigned long irq_flags;
- partid_t partid = XPC_PARTID(part);
spin_lock_irqsave(&part->act_lock, irq_flags);
@@ -749,17 +959,27 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
spin_unlock_irqrestore(&part->act_lock, irq_flags);
- XPC_DISALLOW_HB(partid, xpc_vars);
+ if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
+ xpc_request_partition_disengage(part);
+ xpc_IPI_send_disengage(part);
- dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", partid,
- reason);
+ /* set a timelimit on the disengage request */
+ part->disengage_request_timeout = jiffies +
+ (xpc_disengage_request_timelimit * HZ);
+ part->disengage_request_timer.expires =
+ part->disengage_request_timeout;
+ add_timer(&part->disengage_request_timer);
+ }
+
+ dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
+ XPC_PARTID(part), reason);
- xpc_partition_down(part, reason);
+ xpc_partition_going_down(part, reason);
}
/*
- * Mark specified partition as active.
+ * Mark specified partition as inactive.
*/
void
xpc_mark_partition_inactive(struct xpc_partition *part)
@@ -792,9 +1012,10 @@ xpc_discovery(void)
void *remote_rp_base;
struct xpc_rsvd_page *remote_rp;
struct xpc_vars *remote_vars;
- u64 remote_rsvd_page_pa;
+ u64 remote_rp_pa;
u64 remote_vars_pa;
int region;
+ int region_size;
int max_regions;
int nasid;
struct xpc_rsvd_page *rp;
@@ -804,7 +1025,8 @@ xpc_discovery(void)
enum xpc_retval ret;
- remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RSVD_PAGE_ALIGNED_SIZE,
+ remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
+ xp_nasid_mask_bytes,
GFP_KERNEL, &remote_rp_base);
if (remote_rp == NULL) {
return;
@@ -812,13 +1034,13 @@ xpc_discovery(void)
remote_vars = (struct xpc_vars *) remote_rp;
- discovered_nasids = kmalloc(sizeof(u64) * XP_NASID_MASK_WORDS,
+ discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words,
GFP_KERNEL);
if (discovered_nasids == NULL) {
kfree(remote_rp_base);
return;
}
- memset(discovered_nasids, 0, sizeof(u64) * XP_NASID_MASK_WORDS);
+ memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words);
rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
@@ -827,11 +1049,19 @@ xpc_discovery(void)
* nodes that can comprise an access protection grouping. The access
* protection is in regards to memory, IOI and IPI.
*/
-//>>> move the next two #defines into either include/asm-ia64/sn/arch.h or
-//>>> include/asm-ia64/sn/addrs.h
-#define SH1_MAX_REGIONS 64
-#define SH2_MAX_REGIONS 256
- max_regions = is_shub2() ? SH2_MAX_REGIONS : SH1_MAX_REGIONS;
+ max_regions = 64;
+ region_size = sn_region_size;
+
+ switch (region_size) {
+ case 128:
+ max_regions *= 2;
+ case 64:
+ max_regions *= 2;
+ case 32:
+ max_regions *= 2;
+ region_size = 16;
+ DBUG_ON(!is_shub2());
+ }
for (region = 0; region < max_regions; region++) {
@@ -841,8 +1071,8 @@ xpc_discovery(void)
dev_dbg(xpc_part, "searching region %d\n", region);
- for (nasid = (region * sn_region_size * 2);
- nasid < ((region + 1) * sn_region_size * 2);
+ for (nasid = (region * region_size * 2);
+ nasid < ((region + 1) * region_size * 2);
nasid += 2) {
if ((volatile int) xpc_exiting) {
@@ -852,14 +1082,14 @@ xpc_discovery(void)
dev_dbg(xpc_part, "checking nasid %d\n", nasid);
- if (XPC_NASID_IN_ARRAY(nasid, rp->part_nasids)) {
+ if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
dev_dbg(xpc_part, "PROM indicates Nasid %d is "
"part of the local partition; skipping "
"region\n", nasid);
break;
}
- if (!(XPC_NASID_IN_ARRAY(nasid, rp->mach_nasids))) {
+ if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
dev_dbg(xpc_part, "PROM indicates Nasid %d was "
"not on Numa-Link network at reset\n",
nasid);
@@ -877,7 +1107,7 @@ xpc_discovery(void)
/* pull over the reserved page structure */
ret = xpc_get_remote_rp(nasid, discovered_nasids,
- remote_rp, &remote_rsvd_page_pa);
+ remote_rp, &remote_rp_pa);
if (ret != xpcSuccess) {
dev_dbg(xpc_part, "unable to get reserved page "
"from nasid %d, reason=%d\n", nasid,
@@ -948,6 +1178,13 @@ xpc_discovery(void)
remote_vars->act_nasid,
remote_vars->act_phys_cpuid);
+ if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
+ version)) {
+ part->remote_amos_page_pa =
+ remote_vars->amos_page_pa;
+ xpc_mark_partition_disengaged(part);
+ xpc_cancel_partition_disengage_request(part);
+ }
xpc_IPI_send_activate(remote_vars);
}
}
@@ -974,12 +1211,12 @@ xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask)
return xpcPartitionDown;
}
- part_nasid_pa = part->remote_rp_pa +
- (u64) &((struct xpc_rsvd_page *) 0)->part_nasids;
+ memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
+
+ part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa);
bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask),
- L1_CACHE_ALIGN(XP_NASID_MASK_BYTES),
- (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+ xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
return xpc_map_bte_errors(bte_res);
}
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 0e4b9ad9ef02..9bf9f23b9a1f 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -75,7 +75,7 @@ EXPORT_SYMBOL(sn_dma_set_mask);
* more information.
*/
void *sn_dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int flags)
+ dma_addr_t * dma_handle, gfp_t flags)
{
void *cpuaddr;
unsigned long phys_addr;
@@ -326,6 +326,29 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
{
unsigned long addr;
int ret;
+ struct ia64_sal_retval isrv;
+
+ /*
+ * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+ * around hw issues at the pci bus level. SGI proms older than
+ * 4.10 don't implment this.
+ */
+
+ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+ pci_domain_nr(bus), bus->number,
+ 0, /* io */
+ 0, /* read */
+ port, size, __pa(val));
+
+ if (isrv.status == 0)
+ return size;
+
+ /*
+ * If the above failed, retry using the SAL_PROBE call which should
+ * be present in all proms (but which cannot work round PCI chipset
+ * bugs). This code is retained for compatability with old
+ * pre-4.10 proms, and should be removed at some point in the future.
+ */
if (!SN_PCIBUS_BUSSOFT(bus))
return -ENODEV;
@@ -349,6 +372,29 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
int ret = size;
unsigned long paddr;
unsigned long *addr;
+ struct ia64_sal_retval isrv;
+
+ /*
+ * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+ * around hw issues at the pci bus level. SGI proms older than
+ * 4.10 don't implment this.
+ */
+
+ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+ pci_domain_nr(bus), bus->number,
+ 0, /* io */
+ 1, /* write */
+ port, size, __pa(&val));
+
+ if (isrv.status == 0)
+ return size;
+
+ /*
+ * If the above failed, retry using the SAL_PROBE call which should
+ * be present in all proms (but which cannot work round PCI chipset
+ * bugs). This code is retained for compatability with old
+ * pre-4.10 proms, and should be removed at some point in the future.
+ */
if (!SN_PCIBUS_BUSSOFT(bus)) {
ret = -ENODEV;
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
index 21426d02fbe6..4f718c3e93d3 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
@@ -8,6 +8,7 @@
#include <linux/interrupt.h>
#include <linux/types.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcibr_provider.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/pcidev.h>
@@ -29,10 +30,10 @@ void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_control &= ~bits;
+ __sn_clrq_relaxed(&ptr->tio.cp_control, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_wid_control &= ~bits;
+ __sn_clrq_relaxed(&ptr->pic.p_wid_control, bits);
break;
default:
panic
@@ -49,10 +50,10 @@ void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_control |= bits;
+ __sn_setq_relaxed(&ptr->tio.cp_control, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_wid_control |= bits;
+ __sn_setq_relaxed(&ptr->pic.p_wid_control, bits);
break;
default:
panic
@@ -73,10 +74,10 @@ uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret = ptr->tio.cp_tflush;
+ ret = __sn_readq_relaxed(&ptr->tio.cp_tflush);
break;
case PCIBR_BRIDGETYPE_PIC:
- ret = ptr->pic.p_wid_tflush;
+ ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush);
break;
default:
panic
@@ -103,10 +104,10 @@ uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret = ptr->tio.cp_int_status;
+ ret = __sn_readq_relaxed(&ptr->tio.cp_int_status);
break;
case PCIBR_BRIDGETYPE_PIC:
- ret = ptr->pic.p_int_status;
+ ret = __sn_readq_relaxed(&ptr->pic.p_int_status);
break;
default:
panic
@@ -127,10 +128,10 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_enable &= ~bits;
+ __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_enable &= ~bits;
+ __sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits);
break;
default:
panic
@@ -147,10 +148,10 @@ void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_enable |= bits;
+ __sn_setq_relaxed(&ptr->tio.cp_int_enable, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_enable |= bits;
+ __sn_setq_relaxed(&ptr->pic.p_int_enable, bits);
break;
default:
panic
@@ -171,14 +172,16 @@ void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n,
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR;
- ptr->tio.cp_int_addr[int_n] |=
- (addr & TIOCP_HOST_INTR_ADDR);
+ __sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n],
+ TIOCP_HOST_INTR_ADDR);
+ __sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n],
+ (addr & TIOCP_HOST_INTR_ADDR));
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR;
- ptr->pic.p_int_addr[int_n] |=
- (addr & PIC_HOST_INTR_ADDR);
+ __sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n],
+ PIC_HOST_INTR_ADDR);
+ __sn_setq_relaxed(&ptr->pic.p_int_addr[int_n],
+ (addr & PIC_HOST_INTR_ADDR));
break;
default:
panic
@@ -198,10 +201,10 @@ void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_force_pin[int_n] = 1;
+ writeq(1, &ptr->tio.cp_force_pin[int_n]);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_force_pin[int_n] = 1;
+ writeq(1, &ptr->pic.p_force_pin[int_n]);
break;
default:
panic
@@ -222,10 +225,12 @@ uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret = ptr->tio.cp_wr_req_buf[device];
+ ret =
+ __sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]);
break;
case PCIBR_BRIDGETYPE_PIC:
- ret = ptr->pic.p_wr_req_buf[device];
+ ret =
+ __sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]);
break;
default:
panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr);
@@ -244,10 +249,10 @@ void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index,
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val;
+ writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val;
+ writeq(val, &ptr->pic.p_int_ate_ram[ate_index]);
break;
default:
panic
@@ -265,12 +270,10 @@ uint64_t *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret =
- (uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]);
+ ret = &ptr->tio.cp_int_ate_ram[ate_index];
break;
case PCIBR_BRIDGETYPE_PIC:
- ret =
- (uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]);
+ ret = &ptr->pic.p_int_ate_ram[ate_index];
break;
default:
panic
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 19bced34d5f1..46b646a6d345 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioca_provider.h>
@@ -37,7 +38,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
uint64_t offset;
struct page *tmp;
struct tioca_common *tioca_common;
- volatile struct tioca *ca_base;
+ struct tioca *ca_base;
tioca_common = tioca_kern->ca_common;
ca_base = (struct tioca *)tioca_common->ca_common.bs_base;
@@ -174,27 +175,29 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
* DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029
*/
- ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY; /* PV895469 ? */
- ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM);
- ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT);
+ __sn_setq_relaxed(&ca_base->ca_control1,
+ CA_AGPDMA_OP_ENB_COMBDELAY); /* PV895469 ? */
+ __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
+ __sn_setq_relaxed(&ca_base->ca_control2,
+ (0x2ull << CA_GART_MEM_PARAM_SHFT));
tioca_kern->ca_gart_iscoherent = 1;
- ca_base->ca_control2 &=
- ~(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB);
+ __sn_clrq_relaxed(&ca_base->ca_control2,
+ (CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB));
/*
* Unmask GART fetch error interrupts. Clear residual errors first.
*/
- ca_base->ca_int_status_alias = CA_GART_FETCH_ERR;
- ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR;
- ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR;
+ writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias);
+ writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias);
+ __sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR);
/*
* Program the aperature and gart registers in TIOCA
*/
- ca_base->ca_gart_aperature = ap_reg;
- ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1;
+ writeq(ap_reg, &ca_base->ca_gart_aperature);
+ writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table);
return 0;
}
@@ -211,7 +214,6 @@ void
tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
{
int cap_ptr;
- uint64_t ca_control1;
uint32_t reg;
struct tioca *tioca_base;
struct pci_dev *pdev;
@@ -256,9 +258,7 @@ tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
*/
tioca_base = (struct tioca *)common->ca_common.bs_base;
- ca_control1 = tioca_base->ca_control1;
- ca_control1 |= CA_AGP_FW_ENABLE;
- tioca_base->ca_control1 = ca_control1;
+ __sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE);
}
EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */
@@ -345,7 +345,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
return 0;
}
- agp_dma_extn = ca_base->ca_agp_dma_addr_extn;
+ agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn);
if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
printk(KERN_ERR "%s: coretalk upper node (%u) "
"mismatch with ca_agp_dma_addr_extn (%lu)\n",
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index 8e75db2b825d..9f03d4e5121c 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioce_provider.h>
@@ -227,7 +228,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
ate = ATE_MAKE(addr, pagesize);
ate_shadow[i + j] = ate;
- ate_reg[i + j] = ate;
+ writeq(ate, &ate_reg[i + j]);
addr += pagesize;
}
@@ -268,10 +269,10 @@ tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
- volatile uint64_t tmp;
+ uint64_t tmp;
ce_kern->ce_port[port].dirmap_shadow = ct_upper;
- ce_mmr->ce_ure_dir_map[port] = ct_upper;
+ writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
tmp = ce_mmr->ce_ure_dir_map[port];
dma_ok = 1;
} else
@@ -343,7 +344,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
if (TIOCE_D32_ADDR(bus_addr)) {
if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
ce_kern->ce_port[port].dirmap_shadow = 0;
- ce_mmr->ce_ure_dir_map[port] = 0;
+ writeq(0, &ce_mmr->ce_ure_dir_map[port]);
}
} else {
struct tioce_dmamap *map;
@@ -582,18 +583,18 @@ tioce_kern_init(struct tioce_common *tioce_common)
*/
tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
- tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK;
- tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE;
+ __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK);
+ __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE);
tioce_kern->ce_ate3240_pagesize = KB(256);
for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
tioce_kern->ce_ate40_shadow[i] = 0;
- tioce_mmr->ce_ure_ate40[i] = 0;
+ writeq(0, &tioce_mmr->ce_ure_ate40[i]);
}
for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
tioce_kern->ce_ate3240_shadow[i] = 0;
- tioce_mmr->ce_ure_ate3240[i] = 0;
+ writeq(0, &tioce_mmr->ce_ure_ate3240[i]);
}
return tioce_kern;
@@ -665,7 +666,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
default:
return;
}
- ce_mmr->ce_adm_force_int = force_int_val;
+ writeq(force_int_val, &ce_mmr->ce_adm_force_int);
}
/**
@@ -686,6 +687,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
struct tioce_common *ce_common;
struct tioce *ce_mmr;
int bit;
+ uint64_t vector;
pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
if (!pcidev_info)
@@ -696,11 +698,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
bit = sn_irq_info->irq_int_bit;
- ce_mmr->ce_adm_int_mask |= (1UL << bit);
- ce_mmr->ce_adm_int_dest[bit] =
- ((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) |
- sn_irq_info->irq_xtalkaddr;
- ce_mmr->ce_adm_int_mask &= ~(1UL << bit);
+ __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+ vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+ vector |= sn_irq_info->irq_xtalkaddr;
+ writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
+ __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
tioce_force_interrupt(sn_irq_info);
}