summaryrefslogtreecommitdiff
path: root/arch/microblaze/kernel/prom.c
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2010-01-28 22:18:56 -0700
committerGrant Likely <grant.likely@secretlab.ca>2010-02-09 08:32:36 -0700
commit580537140568caddbc8a727d4c2f238d38707f68 (patch)
treea5cdd290efc0409efac396749406072ea0a360d0 /arch/microblaze/kernel/prom.c
parent0ada0a73120c28cc432bcdbac061781465c2f48f (diff)
microblaze: remove early_init_dt_scan_cpus() and phyp_dump_*()
Microblaze only has one CPU, it isn't SMP at all. early_init_dt_scan_cpus() is effectively just a no-op, so remove it. Microblaze doesn't support hypervisor assisted dump either, so the phyp stuff can also go. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Michal Simek <monstr@monstr.eu>
Diffstat (limited to 'arch/microblaze/kernel/prom.c')
-rw-r--r--arch/microblaze/kernel/prom.c153
1 files changed, 0 insertions, 153 deletions
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 6eff83a71218..cd158ef5b583 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -47,67 +47,6 @@ struct device_node *of_chosen;
#define early_init_dt_scan_drconf_memory(node) 0
-static int __init early_init_dt_scan_cpus(unsigned long node,
- const char *uname, int depth,
- void *data)
-{
- static int logical_cpuid;
- char *type = of_get_flat_dt_prop(node, "device_type", NULL);
- const u32 *intserv;
- int i, nthreads;
- int found = 0;
-
- /* We are scanning "cpu" nodes only */
- if (type == NULL || strcmp(type, "cpu") != 0)
- return 0;
-
- /* Get physical cpuid */
- intserv = of_get_flat_dt_prop(node, "reg", NULL);
- nthreads = 1;
-
- /*
- * Now see if any of these threads match our boot cpu.
- * NOTE: This must match the parsing done in smp_setup_cpu_maps.
- */
- for (i = 0; i < nthreads; i++) {
- /*
- * version 2 of the kexec param format adds the phys cpuid of
- * booted proc.
- */
- if (initial_boot_params && initial_boot_params->version >= 2) {
- if (intserv[i] ==
- initial_boot_params->boot_cpuid_phys) {
- found = 1;
- break;
- }
- } else {
- /*
- * Check if it's the boot-cpu, set it's hw index now,
- * unfortunately this format did not support booting
- * off secondary threads.
- */
- if (of_get_flat_dt_prop(node,
- "linux,boot-cpu", NULL) != NULL) {
- found = 1;
- break;
- }
- }
-
-#ifdef CONFIG_SMP
- /* logical cpu id is always 0 on UP kernels */
- logical_cpuid++;
-#endif
- }
-
- if (found) {
- pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid,
- intserv[i]);
- boot_cpuid = logical_cpuid;
- }
-
- return 0;
-}
-
void __init early_init_dt_scan_chosen_arch(unsigned long node)
{
/* No Microblaze specific code here */
@@ -163,86 +102,6 @@ static int __init early_init_dt_scan_memory(unsigned long node,
return 0;
}
-#ifdef CONFIG_PHYP_DUMP
-/**
- * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
- *
- * Function to find the largest size we need to reserve
- * during early boot process.
- *
- * It either looks for boot param and returns that OR
- * returns larger of 256 or 5% rounded down to multiples of 256MB.
- *
- */
-static inline unsigned long phyp_dump_calculate_reserve_size(void)
-{
- unsigned long tmp;
-
- if (phyp_dump_info->reserve_bootvar)
- return phyp_dump_info->reserve_bootvar;
-
- /* divide by 20 to get 5% of value */
- tmp = lmb_end_of_DRAM();
- do_div(tmp, 20);
-
- /* round it down in multiples of 256 */
- tmp = tmp & ~0x0FFFFFFFUL;
-
- return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
-}
-
-/**
- * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
- *
- * This routine may reserve memory regions in the kernel only
- * if the system is supported and a dump was taken in last
- * boot instance or if the hardware is supported and the
- * scratch area needs to be setup. In other instances it returns
- * without reserving anything. The memory in case of dump being
- * active is freed when the dump is collected (by userland tools).
- */
-static void __init phyp_dump_reserve_mem(void)
-{
- unsigned long base, size;
- unsigned long variable_reserve_size;
-
- if (!phyp_dump_info->phyp_dump_configured) {
- printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
- return;
- }
-
- if (!phyp_dump_info->phyp_dump_at_boot) {
- printk(KERN_INFO "Phyp-dump disabled at boot time\n");
- return;
- }
-
- variable_reserve_size = phyp_dump_calculate_reserve_size();
-
- if (phyp_dump_info->phyp_dump_is_active) {
- /* Reserve *everything* above RMR.Area freed by userland tools*/
- base = variable_reserve_size;
- size = lmb_end_of_DRAM() - base;
-
- /* XXX crashed_ram_end is wrong, since it may be beyond
- * the memory_limit, it will need to be adjusted. */
- lmb_reserve(base, size);
-
- phyp_dump_info->init_reserve_start = base;
- phyp_dump_info->init_reserve_size = size;
- } else {
- size = phyp_dump_info->cpu_state_size +
- phyp_dump_info->hpte_region_size +
- variable_reserve_size;
- base = lmb_end_of_DRAM() - size;
- lmb_reserve(base, size);
- phyp_dump_info->init_reserve_start = base;
- phyp_dump_info->init_reserve_size = size;
- }
-}
-#else
-static inline void __init phyp_dump_reserve_mem(void) {}
-#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */
-
#ifdef CONFIG_EARLY_PRINTK
/* MS this is Microblaze specifig function */
static int __init early_init_dt_scan_serial(unsigned long node,
@@ -284,11 +143,6 @@ void __init early_init_devtree(void *params)
/* Setup flat device-tree pointer */
initial_boot_params = params;
-#ifdef CONFIG_PHYP_DUMP
- /* scan tree to see if dump occured during last boot */
- of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
-#endif
-
/* Retrieve various informations from the /chosen node of the
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
@@ -308,13 +162,6 @@ void __init early_init_devtree(void *params)
pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
- pr_debug("Scanning CPUs ...\n");
-
- /* Retreive CPU related informations from the flat tree
- * (altivec support, boot CPU ID, ...)
- */
- of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
-
pr_debug(" <- early_init_devtree()\n");
}