Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...

1 files changed, 83 insertions, 38 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1a322c807f22..b3c5bde43d34 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -65,6 +65,7 @@ config MIPS
 	select HANDLE_DOMAIN_IRQ
 	select HAVE_EXIT_THREAD
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_ARCH_HARDENED_USERCOPY
 
 menu "Machine selection"
 
@@ -72,6 +73,57 @@ choice
 	prompt "System type"
 	default SGI_IP22
 
+config MIPS_GENERIC
+	bool "Generic board-agnostic MIPS kernel"
+	select BOOT_RAW
+	select BUILTIN_DTB
+	select CEVT_R4K
+	select CLKSRC_MIPS_GIC
+	select COMMON_CLK
+	select CPU_MIPSR2_IRQ_VI
+	select CPU_MIPSR2_IRQ_EI
+	select CSRC_R4K
+	select DMA_PERDEV_COHERENT
+	select HW_HAS_PCI
+	select IRQ_MIPS_CPU
+	select LIBFDT
+	select MIPS_CPU_SCACHE
+	select MIPS_GIC
+	select MIPS_L1_CACHE_SHIFT_7
+	select NO_EXCEPT_FILL
+	select PCI_DRIVERS_GENERIC
+	select PINCTRL
+	select SMP_UP if SMP
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS32_R6
+	select SYS_HAS_CPU_MIPS64_R1
+	select SYS_HAS_CPU_MIPS64_R2
+	select SYS_HAS_CPU_MIPS64_R6
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MICROMIPS
+	select SYS_SUPPORTS_MIPS_CPS
+	select SYS_SUPPORTS_MIPS16
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_SUPPORTS_RELOCATABLE
+	select SYS_SUPPORTS_SMARTMIPS
+	select USB_EHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+	select USB_EHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+	select USE_OF
+	help
+	  Select this to build a kernel which aims to support multiple boards,
+	  generally using a flattened device tree passed from the bootloader
+	  using the boot protocol defined in the UHI (Unified Hosting
+	  Interface) specification.
+
 config MIPS_ALCHEMY
 	bool "Alchemy processor based machines"
 	select ARCH_PHYS_ADDR_T_64BIT
@@ -478,6 +530,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_ZBOOT
 	select SYS_SUPPORTS_RELOCATABLE
 	select USE_OF
+	select LIBFDT
 	select ZONE_DMA32 if 64BIT
 	select BUILTIN_DTB
 	select LIBFDT
@@ -493,42 +546,6 @@ config MACH_PIC32
 	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
 	  microcontrollers.
 
-config MIPS_SEAD3
-	bool "MIPS SEAD3 board"
-	select BOOT_ELF32
-	select BOOT_RAW
-	select BUILTIN_DTB
-	select CEVT_R4K
-	select CSRC_R4K
-	select CLKSRC_MIPS_GIC
-	select COMMON_CLK
-	select CPU_MIPSR2_IRQ_VI
-	select CPU_MIPSR2_IRQ_EI
-	select DMA_NONCOHERENT
-	select IRQ_MIPS_CPU
-	select MIPS_GIC
-	select LIBFDT
-	select MIPS_MSC
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS32_R6
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_SMARTMIPS
-	select SYS_SUPPORTS_MICROMIPS
-	select SYS_SUPPORTS_MIPS16
-	select SYS_SUPPORTS_RELOCATABLE
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	select USE_OF
-	help
-	  This enables support for the MIPS Technologies SEAD3 evaluation
-	  board.
-
 config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
@@ -988,6 +1005,7 @@ source "arch/mips/ath79/Kconfig"
 source "arch/mips/bcm47xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/bmips/Kconfig"
+source "arch/mips/generic/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
@@ -1098,6 +1116,10 @@ config DMA_MAYBE_COHERENT
 	select DMA_NONCOHERENT
 	bool
 
+config DMA_PERDEV_COHERENT
+	bool
+	select DMA_MAYBE_COHERENT
+
 config DMA_COHERENT
 	bool
 
@@ -1401,6 +1423,16 @@ config CPU_LOONGSON1B
 	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
 	  release 2 instruction set.
 
+config CPU_LOONGSON1C
+	bool "Loongson 1C"
+	depends on SYS_HAS_CPU_LOONGSON1C
+	select CPU_LOONGSON1
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select LEDS_GPIO_REGISTER
+	help
+	  The Loongson 1C is a 32-bit SoC, which implements the MIPS32
+	  release 2 instruction set.
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1850,6 +1882,9 @@ config SYS_HAS_CPU_LOONGSON2F
 config SYS_HAS_CPU_LOONGSON1B
 	bool
 
+config SYS_HAS_CPU_LOONGSON1C
+	bool
+
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
@@ -2906,7 +2941,7 @@ endchoice
 choice
 	prompt "Kernel command line type" if !CMDLINE_OVERRIDE
 	default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
-					 !MIPS_MALTA && !MIPS_SEAD3 && \
+					 !MIPS_MALTA && \
 					 !CAVIUM_OCTEON_SOC
 	default MIPS_CMDLINE_FROM_BOOTLOADER
 
@@ -2960,7 +2995,6 @@ config PCI
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -2981,6 +3015,17 @@ config HT_PCI
 config PCI_DOMAINS
 	bool
 
+config PCI_DOMAINS_GENERIC
+	bool
+
+config PCI_DRIVERS_GENERIC
+	select PCI_DOMAINS_GENERIC if PCI_DOMAINS
+	bool
+
+config PCI_DRIVERS_LEGACY
+	def_bool !PCI_DRIVERS_GENERIC
+	select NO_GENERIC_PCI_IOPORT_MAP
+
 source "drivers/pci/Kconfig"
 
 #