MIPS: BCM63XX: add support for BCM3368 Cable Modem

The Broadcom BCM3368 Cable Modem SoC is extremely similar to the
existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort
in the existing code base is required to get it supported. This patch adds
support for the following on-chip peripherals:

- two UARTS
- GPIO
- Ethernet
- SPI
- PCI
- NOR Flash

The most noticeable difference with 3368 is that it has its peripheral
register at 0xfff8_0000 we check that separately in ioremap.h. Since
3368 is identical to 6358 for its clock and reset bits, we use them
verbatim.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5499/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 44 insertions, 1 deletions

diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index 3203fe49b34d..654213746b32 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -15,6 +15,39 @@
 /* Clock Control register */
 #define PERF_CKCTL_REG			0x4
 
+#define CKCTL_3368_MAC_EN		(1 << 3)
+#define CKCTL_3368_TC_EN		(1 << 5)
+#define CKCTL_3368_US_TOP_EN		(1 << 6)
+#define CKCTL_3368_DS_TOP_EN		(1 << 7)
+#define CKCTL_3368_APM_EN		(1 << 8)
+#define CKCTL_3368_SPI_EN		(1 << 9)
+#define CKCTL_3368_USBS_EN		(1 << 10)
+#define CKCTL_3368_BMU_EN		(1 << 11)
+#define CKCTL_3368_PCM_EN		(1 << 12)
+#define CKCTL_3368_NTP_EN		(1 << 13)
+#define CKCTL_3368_ACP_B_EN		(1 << 14)
+#define CKCTL_3368_ACP_A_EN		(1 << 15)
+#define CKCTL_3368_EMUSB_EN		(1 << 17)
+#define CKCTL_3368_ENET0_EN		(1 << 18)
+#define CKCTL_3368_ENET1_EN		(1 << 19)
+#define CKCTL_3368_USBU_EN		(1 << 20)
+#define CKCTL_3368_EPHY_EN		(1 << 21)
+
+#define CKCTL_3368_ALL_SAFE_EN		(CKCTL_3368_MAC_EN | \
+					 CKCTL_3368_TC_EN | \
+					 CKCTL_3368_US_TOP_EN | \
+					 CKCTL_3368_DS_TOP_EN | \
+					 CKCTL_3368_APM_EN | \
+					 CKCTL_3368_SPI_EN | \
+					 CKCTL_3368_USBS_EN | \
+					 CKCTL_3368_BMU_EN | \
+					 CKCTL_3368_PCM_EN | \
+					 CKCTL_3368_NTP_EN | \
+					 CKCTL_3368_ACP_B_EN | \
+					 CKCTL_3368_ACP_A_EN | \
+					 CKCTL_3368_EMUSB_EN | \
+					 CKCTL_3368_USBU_EN)
+
 #define CKCTL_6328_PHYMIPS_EN		(1 << 0)
 #define CKCTL_6328_ADSL_QPROC_EN	(1 << 1)
 #define CKCTL_6328_ADSL_AFE_EN		(1 << 2)
@@ -181,6 +214,7 @@
 #define SYS_PLL_SOFT_RESET		0x1
 
 /* Interrupt Mask register */
+#define PERF_IRQMASK_3368_REG		0xc
 #define PERF_IRQMASK_6328_REG		0x20
 #define PERF_IRQMASK_6338_REG		0xc
 #define PERF_IRQMASK_6345_REG		0xc
@@ -190,6 +224,7 @@
 #define PERF_IRQMASK_6368_REG		0x20
 
 /* Interrupt Status register */
+#define PERF_IRQSTAT_3368_REG		0x10
 #define PERF_IRQSTAT_6328_REG		0x28
 #define PERF_IRQSTAT_6338_REG		0x10
 #define PERF_IRQSTAT_6345_REG		0x10
@@ -199,6 +234,7 @@
 #define PERF_IRQSTAT_6368_REG		0x28
 
 /* External Interrupt Configuration register */
+#define PERF_EXTIRQ_CFG_REG_3368	0x14
 #define PERF_EXTIRQ_CFG_REG_6328	0x18
 #define PERF_EXTIRQ_CFG_REG_6338	0x14
 #define PERF_EXTIRQ_CFG_REG_6345	0x14
@@ -236,6 +272,13 @@
 #define PERF_SOFTRESET_6362_REG		0x10
 #define PERF_SOFTRESET_6368_REG		0x10
 
+#define SOFTRESET_3368_SPI_MASK		(1 << 0)
+#define SOFTRESET_3368_ENET_MASK	(1 << 2)
+#define SOFTRESET_3368_MPI_MASK		(1 << 3)
+#define SOFTRESET_3368_EPHY_MASK	(1 << 6)
+#define SOFTRESET_3368_USBS_MASK	(1 << 11)
+#define SOFTRESET_3368_PCM_MASK		(1 << 13)
+
 #define SOFTRESET_6328_SPI_MASK		(1 << 0)
 #define SOFTRESET_6328_EPHY_MASK	(1 << 1)
 #define SOFTRESET_6328_SAR_MASK		(1 << 2)
@@ -1293,7 +1336,7 @@
 #define SPI_6348_RX_DATA		0x80
 #define SPI_6348_RX_DATA_SIZE		0x3f
 
-/* BCM 6358/6262/6368 SPI core */
+/* BCM 3368/6358/6262/6368 SPI core */
 #define SPI_6358_MSG_CTL		0x00	/* 16-bits register */
 #define SPI_6358_MSG_CTL_WIDTH		16
 #define SPI_6358_MSG_DATA		0x02