summaryrefslogtreecommitdiff
path: root/arch/mips/include
diff options
context:
space:
mode:
authorThomas Bogendoerfer <tsbogend@alpha.franken.de>2020-04-20 14:30:35 +0200
committerThomas Bogendoerfer <tsbogend@alpha.franken.de>2020-05-09 18:05:52 +0200
commit1b00767fd8e1b49685ee7237c3875b8aa998ae3b (patch)
treecea53c3d4425dac113e83f5ac21975d8ada66848 /arch/mips/include
parent10760dde9be317a1abb426b2db9d6a698086cac9 (diff)
MIPS: Remove PMC MSP71xx platform
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Diffstat (limited to 'arch/mips/include')
-rw-r--r--arch/mips/include/asm/bootinfo.h11
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h22
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h139
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h343
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h31
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h189
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h159
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h237
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h652
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h129
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h124
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/war.h28
12 files changed, 0 insertions, 2064 deletions
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index dcd6a75277d1..c3bd9b2d66e4 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -42,17 +42,6 @@
#define MACH_DS5900 10 /* DECsystem 5900 */
/*
- * Valid machtype for group PMC-MSP
- */
-#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */
-#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */
-#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */
-#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */
-#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */
-#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
-#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
-
-/*
* Valid machtype for group Mikrotik
*/
#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h
deleted file mode 100644
index 016fa9446ba9..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_has_mips16 1
-#define cpu_has_dsp 1
-/* #define cpu_has_dsp2 ??? - do runtime detection */
-#define cpu_has_mipsmt 1
-#define cpu_has_fpu 0
-
-#define cpu_has_mips32r1 0
-#define cpu_has_mips32r2 1
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
-
-#endif /* __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h
deleted file mode 100644
index 50de6876e1c9..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Defines for the MSP interrupt controller.
- *
- * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
- * Author: Carsten Langgaard, carstenl@mips.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#ifndef _MSP_CIC_INT_H
-#define _MSP_CIC_INT_H
-
-/*
- * The PMC-Sierra CIC interrupts are all centrally managed by the
- * CIC sub-system.
- * We attempt to keep the interrupt numbers as consistent as possible
- * across all of the MSP devices, but some differences will creep in ...
- * The interrupts which are directly forwarded to the MIPS core interrupts
- * are assigned interrupts in the range 0-7, interrupts cascaded through
- * the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4
- * (MSP_INT_CIC). Currently we don't really distinguish between VPE1
- * and VPE0 (or thread contexts for that matter). Will have to fix.
- * The PER interrupts are assigned interrupts in the range 40-71.
-*/
-
-
-/*
- * IRQs directly forwarded to the CPU
- */
-#define MSP_MIPS_INTBASE 0
-#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */
-#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */
-#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */
-#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */
-#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */
-#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */
-#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */
-#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */
-
-/*
- * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
- * These defines should be tied to the register definitions for the CIC
- * interrupt routine. For now, just use hard-coded values.
- */
-#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8)
-#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0)
- /* External interrupt 0 */
-#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1)
- /* External interrupt 1 */
-#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2)
- /* External interrupt 2 */
-#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3)
- /* External interrupt 3 */
-#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4)
- /* CPU interface interrupt */
-#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5)
- /* External interrupt 4 */
-#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6)
- /* Cascaded IRQ for USB */
-#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7)
- /* Sec engine mailbox IRQ */
-#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8)
- /* External interrupt 5 */
-#define MSP_INT_TDM (MSP_CIC_INTBASE + 9)
- /* TDM interrupt */
-#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10)
- /* Cascaded IRQ for MAC 0 */
-#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11)
- /* Cascaded IRQ for MAC 1 */
-#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12)
- /* Cascaded IRQ for sec engine */
-#define MSP_INT_PER (MSP_CIC_INTBASE + 13)
- /* Peripheral interrupt */
-#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14)
- /* SLP timer 0 */
-#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15)
- /* SLP timer 1 */
-#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16)
- /* SLP timer 2 */
-#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17)
- /* VPE0 MIPS timer */
-#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18)
- /* Block Copy */
-#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19)
- /* UART 0 */
-#define MSP_INT_PCI (MSP_CIC_INTBASE + 20)
- /* PCI subsystem */
-#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21)
- /* External interrupt 5 */
-#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22)
- /* PCI Message Signal */
-#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23)
- /* Cascaded ADSL2+ SAR IRQ */
-#define MSP_INT_DSL (MSP_CIC_INTBASE + 24)
- /* ADSL2+ IRQ */
-#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25)
- /* SLP error condition */
-#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26)
- /* VPE1 MIPS timer */
-#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27)
- /* VPE0 Performance counter */
-#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28)
- /* VPE1 Performance counter */
-#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29)
- /* External interrupt 5 */
-#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30)
- /* VPE0 Software interrupt */
-#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31)
- /* VPE0 Software interrupt */
-
-/*
- * IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
- */
-#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32)
-/* Reserved 0-1 */
-#define MSP_INT_UART1 (MSP_PER_INTBASE + 2)
- /* UART 1 */
-/* Reserved 3-5 */
-#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6)
- /* 2-wire */
-#define MSP_INT_TM0 (MSP_PER_INTBASE + 7)
- /* Peripheral timer block out 0 */
-#define MSP_INT_TM1 (MSP_PER_INTBASE + 8)
- /* Peripheral timer block out 1 */
-/* Reserved 9 */
-#define MSP_INT_SPRX (MSP_PER_INTBASE + 10)
- /* SPI RX complete */
-#define MSP_INT_SPTX (MSP_PER_INTBASE + 11)
- /* SPI TX complete */
-#define MSP_INT_GPIO (MSP_PER_INTBASE + 12)
- /* GPIO */
-#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13)
- /* Peripheral error */
-/* Reserved 14-31 */
-
-#endif /* !_MSP_CIC_INT_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
deleted file mode 100644
index daacebb047c2..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- *
- * Macros for external SMP-safe access to the PMC MSP71xx reference
- * board GPIO pins
- *
- * Copyright 2010 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MSP_GPIO_MACROS_H__
-#define __MSP_GPIO_MACROS_H__
-
-#include <msp_regops.h>
-#include <msp_regs.h>
-
-#ifdef CONFIG_PMC_MSP7120_GW
-#define MSP_NUM_GPIOS 20
-#else
-#define MSP_NUM_GPIOS 28
-#endif
-
-/* -- GPIO Enumerations -- */
-enum msp_gpio_data {
- MSP_GPIO_LO = 0,
- MSP_GPIO_HI = 1,
- MSP_GPIO_NONE, /* Special - Means pin is out of range */
- MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */
-};
-
-enum msp_gpio_mode {
- MSP_GPIO_INPUT = 0x0,
- /* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */
- MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */
- MSP_GPIO_OUTPUT = 0x8,
- MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */
- MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */
- MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */
- MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */
-};
-
-/* -- Static Tables -- */
-
-/* Maps pins to data register */
-static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = {
- /* GPIO 0 and 1 on the first register */
- GPIO_DATA1_REG, GPIO_DATA1_REG,
- /* GPIO 2, 3, 4, and 5 on the second register */
- GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG,
- /* GPIO 6, 7, 8, and 9 on the third register */
- GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG,
- /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
- GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG,
- GPIO_DATA4_REG, GPIO_DATA4_REG,
- /* GPIO 16 - 23 on the first strange EXTENDED register */
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- /* GPIO 24 - 27 on the second strange EXTENDED register */
- EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
- EXTENDED_GPIO2_REG,
-};
-
-/* Maps pins to mode register */
-static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = {
- /* GPIO 0 and 1 on the first register */
- GPIO_CFG1_REG, GPIO_CFG1_REG,
- /* GPIO 2, 3, 4, and 5 on the second register */
- GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG,
- /* GPIO 6, 7, 8, and 9 on the third register */
- GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG,
- /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
- GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG,
- GPIO_CFG4_REG, GPIO_CFG4_REG,
- /* GPIO 16 - 23 on the first strange EXTENDED register */
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- /* GPIO 24 - 27 on the second strange EXTENDED register */
- EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
- EXTENDED_GPIO2_REG,
-};
-
-/* Maps 'basic' pins to relative offset from 0 per register */
-static int MSP_GPIO_OFFSET[] = {
- /* GPIO 0 and 1 on the first register */
- 0, 0,
- /* GPIO 2, 3, 4, and 5 on the second register */
- 2, 2, 2, 2,
- /* GPIO 6, 7, 8, and 9 on the third register */
- 6, 6, 6, 6,
- /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
- 10, 10, 10, 10, 10, 10,
-};
-
-/* Maps MODE to allowed pin mask */
-static unsigned int MSP_GPIO_MODE_ALLOWED[] = {
- 0xffffffff, /* Mode 0 - INPUT */
- 0x00000, /* Mode 1 - INTERRUPT */
- 0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/
- 0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */
- 0xffffffff, /* Mode 8 - OUTPUT */
- 0x0000f, /* Mode 9 - UART_OUTPUT/
- PERF_TIMERA (GPIO 0, 1, 2, 3) */
- 0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */
- 0x00000, /* Mode b - Not really a mode! */
-};
-
-/* -- Bit masks -- */
-
-/* This gives you the 'register relative offset gpio' number */
-#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio])
-
-/* These take the 'register relative offset gpio' number */
-#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio)
-#define BASIC_MODE_REG_VALUE(mode, ogpio) \
- (mode << BASIC_MODE_REG_SHIFT(ogpio))
-#define BASIC_MODE_REG_MASK(ogpio) \
- BASIC_MODE_REG_VALUE(0xf, ogpio)
-#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4)
-#define BASIC_MODE_REG_FROM_REG(data, ogpio) \
- ((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio))
-
-/* These take the actual GPIO number (0 through 15) */
-#define BASIC_DATA_MASK(gpio) \
- BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_MASK(gpio) \
- BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE(mode, gpio) \
- BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_SHIFT(gpio) \
- BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_FROM_REG(data, gpio) \
- BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio))
-
-/*
- * Each extended GPIO register is 32 bits long and is responsible for up to
- * eight GPIOs. The least significant 16 bits contain the set and clear bit
- * pair for each of the GPIOs. The most significant 16 bits contain the
- * disable and enable bit pair for each of the GPIOs. For example, the
- * extended GPIO reg for GPIOs 16-23 is as follows:
- *
- * 31: GPIO23_DISABLE
- * ...
- * 19: GPIO17_DISABLE
- * 18: GPIO17_ENABLE
- * 17: GPIO16_DISABLE
- * 16: GPIO16_ENABLE
- * ...
- * 3: GPIO17_SET
- * 2: GPIO17_CLEAR
- * 1: GPIO16_SET
- * 0: GPIO16_CLEAR
- */
-
-/* This gives the 'register relative offset gpio' number */
-#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24)
-
-/* These take the 'register relative offset gpio' number */
-#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16))
-#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16))
-#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2))
-#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2))
-
-/* These take the actual GPIO number (16 through 27) */
-#define EXTENDED_DISABLE(gpio) \
- EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio))
-#define EXTENDED_ENABLE(gpio) \
- EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio))
-#define EXTENDED_SET(gpio) \
- EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio))
-#define EXTENDED_CLR(gpio) \
- EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio))
-
-#define EXTENDED_FULL_MASK (0xffffffff)
-
-/* -- API inline-functions -- */
-
-/*
- * Gets the current value of the specified pin
- */
-static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio)
-{
- u32 pinhi_mask = 0, pinhi_mask2 = 0;
-
- if (gpio >= MSP_NUM_GPIOS)
- return MSP_GPIO_NONE;
-
- if (gpio < 16) {
- pinhi_mask = BASIC_DATA_MASK(gpio);
- } else {
- /*
- * Two cases are possible with the EXTENDED register:
- * - In output mode (ENABLED flag set), check the CLR bit
- * - In input mode (ENABLED flag not set), check the SET bit
- */
- pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio);
- pinhi_mask2 = EXTENDED_SET(gpio);
- }
- if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) ||
- (*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2))
- return MSP_GPIO_HI;
- else
- return MSP_GPIO_LO;
-}
-
-/* Sets the specified pin to the specified value */
-static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio)
-{
- if (gpio >= MSP_NUM_GPIOS)
- return;
-
- if (gpio < 16) {
- if (data == MSP_GPIO_TOGGLE)
- toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- BASIC_DATA_MASK(gpio));
- else if (data == MSP_GPIO_HI)
- set_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- BASIC_DATA_MASK(gpio));
- else
- clear_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- BASIC_DATA_MASK(gpio));
- } else {
- if (data == MSP_GPIO_TOGGLE) {
- /* Special ugly case:
- * We have to read the CLR bit.
- * If set, we write the CLR bit.
- * If not, we write the SET bit.
- */
- u32 tmpdata;
-
- custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- tmpdata);
- if (tmpdata & EXTENDED_CLR(gpio))
- tmpdata = EXTENDED_CLR(gpio);
- else
- tmpdata = EXTENDED_SET(gpio);
- custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- tmpdata);
- } else {
- u32 newdata;
-
- if (data == MSP_GPIO_HI)
- newdata = EXTENDED_SET(gpio);
- else
- newdata = EXTENDED_CLR(gpio);
- set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- EXTENDED_FULL_MASK, newdata);
- }
- }
-}
-
-/* Sets the specified pin to the specified value */
-static inline void msp_gpio_pin_hi(unsigned int gpio)
-{
- msp_gpio_pin_set(MSP_GPIO_HI, gpio);
-}
-
-/* Sets the specified pin to the specified value */
-static inline void msp_gpio_pin_lo(unsigned int gpio)
-{
- msp_gpio_pin_set(MSP_GPIO_LO, gpio);
-}
-
-/* Sets the specified pin to the opposite value */
-static inline void msp_gpio_pin_toggle(unsigned int gpio)
-{
- msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio);
-}
-
-/* Gets the mode of the specified pin */
-static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio)
-{
- enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN;
- uint32_t data;
-
- if (gpio >= MSP_NUM_GPIOS)
- return retval;
-
- data = *MSP_GPIO_MODE_REGISTER[gpio];
-
- if (gpio < 16) {
- retval = BASIC_MODE_FROM_REG(data, gpio);
- } else {
- /* Extended pins can only be either INPUT or OUTPUT */
- if (data & EXTENDED_ENABLE(gpio))
- retval = MSP_GPIO_OUTPUT;
- else
- retval = MSP_GPIO_INPUT;
- }
-
- return retval;
-}
-
-/*
- * Sets the specified mode on the requested pin
- * Returns 0 on success, or -1 if that mode is not allowed on this pin
- */
-static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio)
-{
- u32 modemask, newmode;
-
- if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode])
- return -1;
-
- if (gpio >= MSP_NUM_GPIOS)
- return -1;
-
- if (gpio < 16) {
- modemask = BASIC_MODE_MASK(gpio);
- newmode = BASIC_MODE(mode, gpio);
- } else {
- modemask = EXTENDED_FULL_MASK;
- if (mode == MSP_GPIO_INPUT)
- newmode = EXTENDED_DISABLE(gpio);
- else
- newmode = EXTENDED_ENABLE(gpio);
- }
- /* Do the set atomically */
- set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode);
-
- return 0;
-}
-
-#endif /* __MSP_GPIO_MACROS_H__ */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h
deleted file mode 100644
index 55078b40f5b5..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Defines for the MSP interrupt handlers.
- *
- * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved.
- * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#ifndef _MSP_INT_H
-#define _MSP_INT_H
-
-/*
- * The PMC-Sierra MSP product line has at least two different interrupt
- * controllers, the SLP register based scheme and the CIC interrupt
- * controller block mechanism. This file distinguishes between them
- * so that devices see a uniform interface.
- */
-
-#if defined(CONFIG_IRQ_MSP_SLP)
- #include "msp_slp_int.h"
-#elif defined(CONFIG_IRQ_MSP_CIC)
- #include "msp_cic_int.h"
-#else
- #error "What sort of interrupt controller does *your* MSP have?"
-#endif
-
-#endif /* !_MSP_INT_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h
deleted file mode 100644
index 5b2535efceb2..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2000-2006 PMC-Sierra INC.
- *
- * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
- * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
- * SOFTWARE.
- */
-
-#ifndef _MSP_PCI_H_
-#define _MSP_PCI_H_
-
-#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
-
-/*
- * It is convenient to program the OATRAN register so that
- * Athena virtual address space and PCI address space are
- * the same. This is not a requirement, just a convenience.
- *
- * The only hard restrictions on the value of OATRAN is that
- * OATRAN must not be programmed to allow translated memory
- * addresses to fall within the lowest 512MB of
- * PCI address space. This region is hardcoded
- * for use as Athena PCI Host Controller target
- * access memory space to the Athena's SDRAM.
- *
- * Note that OATRAN applies only to memory accesses, not
- * to I/O accesses.
- *
- * To program OATRAN to make Athena virtual address space
- * and PCI address space have the same values, OATRAN
- * is to be programmed to 0xB8000000. The top seven
- * bits of the value mimic the seven bits clipped off
- * by the PCI Host controller.
- *
- * With OATRAN at the said value, when the CPU does
- * an access to its virtual address at, say 0xB900_5000,
- * the address appearing on the PCI bus will be
- * 0xB900_5000.
- * - Michael Penner
- */
-#define MSP_PCI_OATRAN 0xB8000000UL
-
-#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL)
-#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000)
-#define MSP_PCI_SPACE_END \
- (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
-#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL)
-#define MSP_PCI_IOSPACE_SIZE 0x1000
-#define MSP_PCI_IOSPACE_END \
- (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
-
-/* IRQ for PCI status interrupts */
-#define PCI_STAT_IRQ 20
-
-#define QFLUSH_REG_1 0xB7F40000
-
-typedef volatile unsigned int pcireg;
-typedef void * volatile ppcireg;
-
-struct pci_block_copy
-{
- pcireg unused1; /* +0x00 */
- pcireg unused2; /* +0x04 */
- ppcireg unused3; /* +0x08 */
- ppcireg unused4; /* +0x0C */
- pcireg unused5; /* +0x10 */
- pcireg unused6; /* +0x14 */
- pcireg unused7; /* +0x18 */
- ppcireg unused8; /* +0x1C */
- ppcireg unused9; /* +0x20 */
- pcireg unusedA; /* +0x24 */
- ppcireg unusedB; /* +0x28 */
- ppcireg unusedC; /* +0x2C */
-};
-
-enum
-{
- config_device_vendor, /* 0 */
- config_status_command, /* 1 */
- config_class_revision, /* 2 */
- config_BIST_header_latency_cache, /* 3 */
- config_BAR0, /* 4 */
- config_BAR1, /* 5 */
- config_BAR2, /* 6 */
- config_not_used7, /* 7 */
- config_not_used8, /* 8 */
- config_not_used9, /* 9 */
- config_CIS, /* 10 */
- config_subsystem, /* 11 */
- config_not_used12, /* 12 */
- config_capabilities, /* 13 */
- config_not_used14, /* 14 */
- config_lat_grant_irq, /* 15 */
- config_message_control,/* 16 */
- config_message_addr, /* 17 */
- config_message_data, /* 18 */
- config_VPD_addr, /* 19 */
- config_VPD_data, /* 20 */
- config_maxregs /* 21 - number of registers */
-};
-
-struct msp_pci_regs
-{
- pcireg hop_unused_00; /* +0x00 */
- pcireg hop_unused_04; /* +0x04 */
- pcireg hop_unused_08; /* +0x08 */
- pcireg hop_unused_0C; /* +0x0C */
- pcireg hop_unused_10; /* +0x10 */
- pcireg hop_unused_14; /* +0x14 */
- pcireg hop_unused_18; /* +0x18 */
- pcireg hop_unused_1C; /* +0x1C */
- pcireg hop_unused_20; /* +0x20 */
- pcireg hop_unused_24; /* +0x24 */
- pcireg hop_unused_28; /* +0x28 */
- pcireg hop_unused_2C; /* +0x2C */
- pcireg hop_unused_30; /* +0x30 */
- pcireg hop_unused_34; /* +0x34 */
- pcireg if_control; /* +0x38 */
- pcireg oatran; /* +0x3C */
- pcireg reset_ctl; /* +0x40 */
- pcireg config_addr; /* +0x44 */
- pcireg hop_unused_48; /* +0x48 */
- pcireg msg_signaled_int_status; /* +0x4C */
- pcireg msg_signaled_int_mask; /* +0x50 */
- pcireg if_status; /* +0x54 */
- pcireg if_mask; /* +0x58 */
- pcireg hop_unused_5C; /* +0x5C */
- pcireg hop_unused_60; /* +0x60 */
- pcireg hop_unused_64; /* +0x64 */
- pcireg hop_unused_68; /* +0x68 */
- pcireg hop_unused_6C; /* +0x6C */
- pcireg hop_unused_70; /* +0x70 */
-
- struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
-
- pcireg error_hdr1; /* +0xE0 */
- pcireg error_hdr2; /* +0xE4 */
-
- pcireg config[config_maxregs] __attribute__((aligned(256)));
-
-};
-
-#define BPCI_CFGADDR_BUSNUM_SHF 16
-#define BPCI_CFGADDR_FUNCTNUM_SHF 8
-#define BPCI_CFGADDR_REGNUM_SHF 2
-#define BPCI_CFGADDR_ENABLE (1<<31)
-
-#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
-#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
-#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */
-#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */
-#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
-#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */
-#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */
-
-#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */
-#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */
-#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */
-#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
-#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
-#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
-#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
-#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
-#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */
-#define BPCI_IFSTATUS_SER (1<<19) /* System error */
-#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */
-#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */
-#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */
-#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */
-#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */
-#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */
-#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */
-#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */
-#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */
-
-#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */
-#define BPCI_RESETCTL_RT (1<<4) /* Release time */
-#define BPCI_RESETCTL_CT (1<<8) /* Config time */
-#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */
-#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */
-#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */
-
-extern struct msp_pci_regs msp_pci_regs
- __attribute__((section(".register")));
-extern unsigned long msp_pci_config_space
- __attribute__((section(".register")));
-
-#endif /* !_MSP_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h
deleted file mode 100644
index 4120a01c30a9..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * MIPS boards bootprom interface for the Linux kernel.
- *
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * Author: Carsten Langgaard, carstenl@mips.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#ifndef _ASM_MSP_PROM_H
-#define _ASM_MSP_PROM_H
-
-#include <linux/types.h>
-
-#define DEVICEID "deviceid"
-#define FEATURES "features"
-#define PROM_ENV "prom_env"
-#define PROM_ENV_FILE "/proc/"PROM_ENV
-#define PROM_ENV_SIZE 256
-
-#define CPU_DEVID_FAMILY 0x0000ff00
-#define CPU_DEVID_REVISION 0x000000ff
-
-#define FPGA_IS_POLO(revision) \
- (((revision >= 0xb0) && (revision < 0xd0)))
-#define FPGA_IS_5000(revision) \
- ((revision >= 0x80) && (revision <= 0x90))
-#define FPGA_IS_ZEUS(revision) ((revision < 0x7f))
-#define FPGA_IS_DUET(revision) \
- (((revision >= 0xa0) && (revision < 0xb0)))
-#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0))
-#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0))
-
-#define MACHINE_TYPE_POLO "POLO"
-#define MACHINE_TYPE_DUET "DUET"
-#define MACHINE_TYPE_ZEUS "ZEUS"
-#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB"
-#define MACHINE_TYPE_MSP5000 "MSP5000"
-#define MACHINE_TYPE_MSP4200 "MSP4200"
-#define MACHINE_TYPE_MSP7120 "MSP7120"
-#define MACHINE_TYPE_MSP7130 "MSP7130"
-#define MACHINE_TYPE_OTHER "OTHER"
-
-#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA"
-#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA"
-#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA"
-#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA"
-#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA"
-#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA"
-#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA"
-#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA"
-
-/* Device Family definitions */
-#define FAMILY_FPGA 0x0000
-#define FAMILY_ZEUS 0x1000
-#define FAMILY_POLO 0x2000
-#define FAMILY_DUET 0x4000
-#define FAMILY_TRIAD 0x5000
-#define FAMILY_MSP4200 0x4200
-#define FAMILY_MSP4200_FPGA 0x4f00
-#define FAMILY_MSP7100 0x7100
-#define FAMILY_MSP7100_FPGA 0x7f00
-
-/* Device Type definitions */
-#define TYPE_MSP7120 0x7120
-#define TYPE_MSP7130 0x7130
-
-#define ENET_KEY 'E'
-#define ENETTXD_KEY 'e'
-#define PCI_KEY 'P'
-#define PCIMUX_KEY 'p'
-#define SEC_KEY 'S'
-#define SPAD_KEY 'D'
-#define TDM_KEY 'T'
-#define ZSP_KEY 'Z'
-
-#define FEATURE_NOEXIST '-'
-#define FEATURE_EXIST '+'
-
-#define ENET_MII 'M'
-#define ENET_RMII 'R'
-
-#define ENETTXD_FALLING 'F'
-#define ENETTXD_RISING 'R'
-
-#define PCI_HOST 'H'
-#define PCI_PERIPHERAL 'P'
-
-#define PCIMUX_FULL 'F'
-#define PCIMUX_SINGLE 'S'
-
-#define SEC_DUET 'D'
-#define SEC_POLO 'P'
-#define SEC_SLOW 'S'
-#define SEC_TRIAD 'T'
-
-#define SPAD_POLO 'P'
-
-#define TDM_DUET 'D' /* DUET TDMs might exist */
-#define TDM_POLO 'P' /* POLO TDMs might exist */
-#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */
-
-#define ZSP_DUET 'D' /* one DUET zsp engine */
-#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */
-
-extern char *prom_getenv(char *name);
-extern void prom_init_cmdline(void);
-extern void prom_meminit(void);
-extern void prom_fixup_mem_map(unsigned long start_mem,
- unsigned long end_mem);
-
-extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr);
-extern unsigned long get_deviceid(void);
-extern char identify_enet(unsigned long interface_num);
-extern char identify_enetTxD(unsigned long interface_num);
-extern char identify_pci(void);
-extern char identify_sec(void);
-extern char identify_spad(void);
-extern char identify_sec(void);
-extern char identify_tdm(void);
-extern char identify_zsp(void);
-extern unsigned long identify_family(void);
-extern unsigned long identify_revision(void);
-
-/*
- * The following macro calls prom_printf and puts the format string
- * into an init section so it can be reclaimed.
- */
-#define ppfinit(f, x...) \
- do { \
- static char _f[] __initdata = KERN_INFO f; \
- printk(_f, ## x); \
- } while (0)
-
-/* Memory descriptor management. */
-#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */
-
-enum yamon_memtypes {
- yamon_dontuse,
- yamon_prom,
- yamon_free,
-};
-
-struct prom_pmemblock {
- unsigned long base; /* Within KSEG0. */
- unsigned int size; /* In bytes. */
- unsigned int type; /* free or prom memory */
-};
-
-extern int prom_argc;
-extern char **prom_argv;
-extern char **prom_envp;
-extern int *prom_vec;
-extern struct prom_pmemblock *prom_getmdesc(void);
-
-#endif /* !_ASM_MSP_PROM_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
deleted file mode 100644
index 90dbe43c8d27..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * SMP/VPE-safe functions to access "registers" (see note).
- *
- * NOTES:
-* - These macros use ll/sc instructions, so it is your responsibility to
- * ensure these are available on your platform before including this file.
- * - The MIPS32 spec states that ll/sc results are undefined for uncached
- * accesses. This means they can't be used on HW registers accessed
- * through kseg1. Code which requires these macros for this purpose must
- * front-end the registers with cached memory "registers" and have a single
- * thread update the actual HW registers.
- * - A maximum of 2k of code can be inserted between ll and sc. Every
- * memory accesses between the instructions will increase the chance of
- * sc failing and having to loop.
- * - When using custom_read_reg32/custom_write_reg32 only perform the
- * necessary logical operations on the register value in between these
- * two calls. All other logic should be performed before the first call.
- * - There is a bug on the R10000 chips which has a workaround. If you
- * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR'
- * to be non-zero. If you are using this header from within linux, you may
- * include <asm/war.h> before including this file to have this defined
- * appropriately for you.
- *
- * Copyright 2005-2007 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
- * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc., 675
- * Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_REGOPS_H__
-#define __ASM_REGOPS_H__
-
-#include <linux/types.h>
-
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-#ifndef R10000_LLSC_WAR
-#define R10000_LLSC_WAR 0
-#endif
-
-#if R10000_LLSC_WAR == 1
-#define __beqz "beqzl "
-#else
-#define __beqz "beqz "
-#endif
-
-#ifndef _LINUX_TYPES_H
-typedef unsigned int u32;
-#endif
-
-/*
- * Sets all the masked bits to the corresponding value bits
- */
-static inline void set_value_reg32(volatile u32 *const addr,
- u32 const mask,
- u32 const value)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set arch=r4000 \n"
- "1: ll %0, %1 # set_value_reg32 \n"
- " and %0, %2 \n"
- " or %0, %3 \n"
- " sc %0, %1 \n"
- " "__beqz"%0, 1b \n"
- " nop \n"
- " .set pop \n"
- : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
- : "ir" (~mask), "ir" (value), GCC_OFF_SMALL_ASM() (*addr));
-}
-
-/*
- * Sets all the masked bits to '1'
- */
-static inline void set_reg32(volatile u32 *const addr,
- u32 const mask)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set arch=r4000 \n"
- "1: ll %0, %1 # set_reg32 \n"
- " or %0, %2 \n"
- " sc %0, %1 \n"
- " "__beqz"%0, 1b \n"
- " nop \n"
- " .set pop \n"
- : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
- : "ir" (mask), GCC_OFF_SMALL_ASM() (*addr));
-}
-
-/*
- * Sets all the masked bits to '0'
- */
-static inline void clear_reg32(volatile u32 *const addr,
- u32 const mask)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set arch=r4000 \n"
- "1: ll %0, %1 # clear_reg32 \n"
- " and %0, %2 \n"
- " sc %0, %1 \n"
- " "__beqz"%0, 1b \n"
- " nop \n"
- " .set pop \n"
- : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
- : "ir" (~mask), GCC_OFF_SMALL_ASM() (*addr));
-}
-
-/*
- * Toggles all masked bits from '0' to '1' and '1' to '0'
- */
-static inline void toggle_reg32(volatile u32 *const addr,
- u32 const mask)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set arch=r4000 \n"
- "1: ll %0, %1 # toggle_reg32 \n"
- " xor %0, %2 \n"
- " sc %0, %1 \n"
- " "__beqz"%0, 1b \n"
- " nop \n"
- " .set pop \n"
- : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
- : "ir" (mask), GCC_OFF_SMALL_ASM() (*addr));
-}
-
-/*
- * Read all masked bits others are returned as '0'
- */
-static inline u32 read_reg32(volatile u32 *const addr,
- u32 const mask)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " lw %0, %1 # read \n"
- " and %0, %2 # mask \n"
- " .set pop \n"
- : "=&r" (temp)
- : "m" (*addr), "ir" (mask));
-
- return temp;
-}
-
-/*
- * blocking_read_reg32 - Read address with blocking load
- *
- * Uncached writes need to be read back to ensure they reach RAM.
- * The returned value must be 'used' to prevent from becoming a
- * non-blocking load.
- */
-static inline u32 blocking_read_reg32(volatile u32 *const addr)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " lw %0, %1 # read \n"
- " move %0, %0 # block \n"
- " .set pop \n"
- : "=&r" (temp)
- : "m" (*addr));
-
- return temp;
-}
-
-/*
- * For special strange cases only:
- *
- * If you need custom processing within a ll/sc loop, use the following macros
- * VERY CAREFULLY:
- *
- * u32 tmp; <-- Define a variable to hold the data
- *
- * custom_read_reg32(address, tmp); <-- Reads the address and put the value
- * in the 'tmp' variable given
- *
- * From here on out, you are (basically) atomic, so don't do anything too
- * fancy!
- * Also, this code may loop if the end of this block fails to write
- * everything back safely due do the other CPU, so do NOT do anything
- * with side-effects!
- *
- * custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely.
- */
-#define custom_read_reg32(address, tmp) \
- __asm__ __volatile__( \
- " .set push \n" \
- " .set arch=r4000 \n" \
- "1: ll %0, %1 #custom_read_reg32 \n" \
- " .set pop \n" \
- : "=r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \
- : GCC_OFF_SMALL_ASM() (*address))
-
-#define custom_write_reg32(address, tmp) \
- __asm__ __volatile__( \
- " .set push \n" \
- " .set arch=r4000 \n" \
- " sc %0, %1 #custom_write_reg32 \n" \
- " "__beqz"%0, 1b \n" \
- " nop \n" \
- " .set pop \n" \
- : "=&r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \
- : "0" (tmp), GCC_OFF_SMALL_ASM() (*address))
-
-#endif /* __ASM_REGOPS_H__ */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h
deleted file mode 100644
index e2ce9be51f3f..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h
+++ /dev/null
@@ -1,652 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Defines for the address space, registers and register configuration
- * (bit masks, access macros etc) for the PMC-Sierra line of MSP products.
- * This file contains addess maps for all the devices in the line of
- * products but only has register definitions and configuration masks for
- * registers which aren't definitely associated with any device. Things
- * like clock settings, reset access, the ELB etc. Individual device
- * drivers will reference the appropriate XXX_BASE value defined here
- * and have individual registers offset from that.
- *
- * Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved.
- * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#include <asm/addrspace.h>
-#include <linux/types.h>
-
-#ifndef _ASM_MSP_REGS_H
-#define _ASM_MSP_REGS_H
-
-/*
- ########################################################################
- # Address space and device base definitions #
- ########################################################################
- */
-
-/*
- ***************************************************************************
- * System Logic and Peripherals (ELB, UART0, etc) device address space *
- ***************************************************************************
- */
-#define MSP_SLP_BASE 0x1c000000
- /* System Logic and Peripherals */
-#define MSP_RST_BASE (MSP_SLP_BASE + 0x10)
- /* System reset register base */
-#define MSP_RST_SIZE 0x0C /* System reset register space */
-
-#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C)
- /* watchdog timer base */
-#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054)
- /* internal timer base */
-#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100)
- /* UART0 controller base */
-#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120)
- /* Block Copy controller base */
-#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160)
- /* Block Copy descriptor base */
-
-/*
- ***************************************************************************
- * PCI address space *
- ***************************************************************************
- */
-#define MSP_PCI_BASE 0x19000000
-
-/*
- ***************************************************************************
- * MSbus device address space *
- ***************************************************************************
- */
-#define MSP_MSB_BASE 0x18000000
- /* MSbus address start */
-#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000)
- /* Peripheral device registers */
-#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000)
- /* MAC A device registers */
-#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000)
- /* MAC B device registers */
-#define MSP_MAC_SIZE 0xE0 /* MAC register space */
-
-#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000)
- /* Security Engine registers */
-#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000)
- /* MAC C device registers */
-#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000)
- /* ADSL2 device registers */
-#define MSP_USB0_BASE (MSP_MSB_BASE + 0xB00000)
- /* USB0 device registers */
-#define MSP_USB1_BASE (MSP_MSB_BASE + 0x300000)
- /* USB1 device registers */
-#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000)
- /* CPU interface registers */
-
-/* Devices within the MSbus peripheral block */
-#define MSP_UART1_BASE (MSP_PER_BASE + 0x030)
- /* UART1 controller base */
-#define MSP_SPI_BASE (MSP_PER_BASE + 0x058)
- /* SPI/MPI control registers */
-#define MSP_TWI_BASE (MSP_PER_BASE + 0x090)
- /* Two-wire control registers */
-#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0)
- /* Programmable timer control */
-
-/*
- ***************************************************************************
- * Physical Memory configuration address space *
- ***************************************************************************
- */
-#define MSP_MEM_CFG_BASE 0x17f00000
-
-#define MSP_MEM_INDIRECT_CTL_10 0x10
-
-/*
- * Notes:
- * 1) The SPI registers are split into two blocks, one offset from the
- * MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by
- * 0x68. The SPI driver definitions for the register must be aware
- * of this.
- * 2) The block copy engine register are divided into two regions, one
- * for the control/configuration of the engine proper and one for the
- * values of the descriptors used in the copy process. These have
- * different base defines (CTRL_BASE vs DESC_BASE)
- * 3) These constants are for physical addresses which means that they
- * work correctly with "ioremap" and friends. This means that device
- * drivers will need to remap these addresses using ioremap and perhaps
- * the readw/writew macros. Or they could use the regptr() macro
- * defined below, but the readw/writew calls are the correct thing.
- * 4) The UARTs have an additional status register offset from the base
- * address. This register isn't used in the standard 8250 driver but
- * may be used in other software. Consult the hardware datasheet for
- * offset details.
- * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers
- * start at an offset of 0x84 from the base address but the block of
- * registers before this is reserved for the security engine. The
- * driver will have to be aware of this but it makes the register
- * definitions line up better with the documentation.
- */
-
-/*
- ########################################################################
- # System register definitions. Not associated with a specific device #
- ########################################################################
- */
-
-/*
- * This macro maps the physical register number into uncached space
- * and (for C code) casts it into a u32 pointer so it can be dereferenced
- * Normally these would be accessed with ioremap and readX/writeX, but
- * these are convenient for a lot of internal kernel code.
- */
-#ifdef __ASSEMBLER__
- #define regptr(addr) (KSEG1ADDR(addr))
-#else
- #define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr)))
-#endif
-
-/*
- ***************************************************************************
- * System Logic and Peripherals (RESET, ELB, etc) registers *
- ***************************************************************************
- */
-
-/* System Control register definitions */
-#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00)
- /* Device-ID RO */
-#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04)
- /* Firmware-ID Register RW */
-#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08)
- /* System-ID Register-0 RW */
-#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C)
- /* System-ID Register-1 RW */
-
-/* System Reset register definitions */
-#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10)
- /* System Reset Status RO */
-#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14)
- /* System Set Reset WO */
-#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18)
- /* System Clear Reset WO */
-
-/* System Clock Registers */
-#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C)
- /* PCI clock generator RW */
-#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20)
- /* UART clock generator RW */
-/* reserved (MSP_SLP_BASE + 0x24) */
-/* reserved (MSP_SLP_BASE + 0x28) */
-#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C)
- /* PLL1 clock generator RW */
-#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30)
- /* PLL0 clock generator RW */
-#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34)
- /* MIPS clock generator RW */
-#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38)
- /* Voice Eng clock generator RW */
-/* reserved (MSP_SLP_BASE + 0x3C) */
-#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40)
- /* MS-Bus clock generator RW */
-#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44)
- /* Sec & MAC clock generator RW */
-#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48)
- /* Per & TDM clock generator RW */
-
-/* Interrupt Controller Registers */
-#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70)
- /* Interrupt status register RW */
-#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74)
- /* Interrupt enable/mask RW */
-#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78)
- /* Security Engine mailbox RW */
-#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C)
- /* Voice Engine mailbox RW */
-
-/* ELB Controller Registers */
-#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80)
- /* ELB CS0 Configuration Reg */
-#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84)
- /* ELB CS0 Base Address Reg */
-#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88)
- /* ELB CS0 Mask Register */
-#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C)
- /* ELB CS0 access register */
-
-#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90)
- /* ELB CS1 Configuration Reg */
-#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94)
- /* ELB CS1 Base Address Reg */
-#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98)
- /* ELB CS1 Mask Register */
-#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C)
- /* ELB CS1 access register */
-
-#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0)
- /* ELB CS2 Configuration Reg */
-#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4)
- /* ELB CS2 Base Address Reg */
-#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8)
- /* ELB CS2 Mask Register */
-#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC)
- /* ELB CS2 access register */
-
-#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0)
- /* ELB CS3 Configuration Reg */
-#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4)
- /* ELB CS3 Base Address Reg */
-#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8)
- /* ELB CS3 Mask Register */
-#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC)
- /* ELB CS3 access register */
-
-#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0)
- /* ELB CS4 Configuration Reg */
-#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4)
- /* ELB CS4 Base Address Reg */
-#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8)
- /* ELB CS4 Mask Register */
-#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC)
- /* ELB CS4 access register */
-
-#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0)
- /* ELB CS5 Configuration Reg */
-#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4)
- /* ELB CS5 Base Address Reg */
-#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8)
- /* ELB CS5 Mask Register */
-#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC)
- /* ELB CS5 access register */
-
-/* reserved 0xE0 - 0xE8 */
-#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC)
- /* ELB single PC card detect */
-
-/* reserved 0xF0 - 0xF8 */
-#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC)
- /* SDRAM read/ELB timing Reg */
-
-/* Extended UART status registers */
-#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0)
- /* UART Status Register 0 */
-#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170)
- /* UART Status Register 1 */
-
-/* Performance monitoring registers */
-#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140)
- /* Performance monitor control */
-#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144)
- /* Performance monitor clear */
-#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148)
- /* Perf monitor counter high */
-#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C)
- /* Perf monitor counter low */
-
-/* System control registers */
-#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150)
- /* System control register */
-#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154)
- /* System Error status 1 */
-#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158)
- /* System Error status 2 */
-#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C)
- /* System Interrupt config */
-
-/* Voice Engine Memory configuration */
-#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C)
- /* Voice engine memory config */
-
-/* CPU/SLP Error Status registers */
-#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180)
- /* CPU/SLP Error status 1 */
-#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184)
- /* CPU/SLP Error status 1 */
-
-/* Extended GPIO registers */
-#define EXTENDED_GPIO1_REG regptr(MSP_SLP_BASE + 0x188)
-#define EXTENDED_GPIO2_REG regptr(MSP_SLP_BASE + 0x18c)
-#define EXTENDED_GPIO_REG EXTENDED_GPIO1_REG
- /* Backward-compatibility */
-
-/* System Error registers */
-#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190)
- /* Int status for SLP errors */
-#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194)
- /* Int mask for SLP errors */
-#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198)
- /* External ELB reset */
-#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C)
- /* Boot Status */
-
-/* Extended ELB addressing */
-#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0)
- /* CS0 Extended address */
-#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4)
- /* CS1 Extended address */
-#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8)
- /* CS2 Extended address */
-#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC)
- /* CS3 Extended address */
-/* reserved 0x1B0 */
-#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4)
- /* CS5 Extended address */
-
-/* PLL Adjustment registers */
-#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200)
- /* PLL0 lock status */
-#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204)
- /* PLL Analog reset status */
-#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208)
- /* PLL0 Adjustment value */
-#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C)
- /* PLL1 Adjustment value */
-
-/*
- ***************************************************************************
- * Peripheral Register definitions *
- ***************************************************************************
- */
-
-/* Peripheral status */
-#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50)
- /* Peripheral control register */
-#define PER_STS_REG regptr(MSP_PER_BASE + 0x54)
- /* Peripheral status register */
-
-/* SPI/MPI Registers */
-#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58)
- /* SPI/MPI Tx Size register */
-#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C)
- /* SPI/MPI Rx Size register */
-#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60)
- /* SPI/MPI Control register */
-#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64)
- /* SPI/MPI Chip Select reg */
-#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0)
- /* SPI/MPI Core Data reg */
-#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4)
- /* SPI/MPI Core Control reg */
-#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8)
- /* SPI/MPI Core Status reg */
-#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC)
- /* SPI/MPI Core Ssel reg */
-#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0)
- /* SPI/MPI Data FIFO reg */
-
-/* Peripheral Block Error Registers */
-#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70)
- /* Error Bit Status Register */
-#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74)
- /* Error Bit Mask Register */
-#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78)
- /* Error Header 1 Register */
-#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C)
- /* Error Header 2 Register */
-
-/* Peripheral Block Interrupt Registers */
-#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80)
- /* Interrupt status register */
-#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84)
- /* Interrupt Mask Register */
-#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88)
- /* GPIO interrupt status reg */
-#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C)
- /* GPIO interrupt MASK Reg */
-
-/* POLO GPIO registers */
-#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0)
- /* Polo GPIO[8:0] data reg */
-#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4)
- /* Polo GPIO[7:0] config reg */
-#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8)
- /* Polo GPIO[15:8] config reg */
-#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC)
- /* Polo GPIO[31:0] output drive */
-#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170)
- /* Polo GPIO[23:16] config reg */
-#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174)
- /* Polo GPIO[15:9] data reg */
-#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178)
- /* Polo GPIO[23:16] data reg */
-#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C)
- /* Polo GPIO[31:24] data reg */
-#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180)
- /* Polo GPIO[39:32] data reg */
-#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184)
- /* Polo GPIO[47:40] data reg */
-#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188)
- /* Polo GPIO[54:48] data reg */
-#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C)
- /* Polo GPIO[31:24] config reg */
-#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190)
- /* Polo GPIO[39:32] config reg */
-#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194)
- /* Polo GPIO[47:40] config reg */
-#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198)
- /* Polo GPIO[54:48] config reg */
-#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C)
- /* Polo GPIO[54:32] output drive */
-
-/* Generic GPIO registers */
-#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170)
- /* GPIO[1:0] data register */
-#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174)
- /* GPIO[5:2] data register */
-#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178)
- /* GPIO[9:6] data register */
-#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C)
- /* GPIO[15:10] data register */
-#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180)
- /* GPIO[1:0] config register */
-#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184)
- /* GPIO[5:2] config register */
-#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188)
- /* GPIO[9:6] config register */
-#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C)
- /* GPIO[15:10] config register */
-#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190)
- /* GPIO[15:0] output drive */
-
-/*
- ***************************************************************************
- * CPU Interface register definitions *
- ***************************************************************************
- */
-#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00)
- /* PCI-SDRAM queue flush trigger */
-#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04)
- /* OCP Error Attribute 1 */
-#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08)
- /* OCP Error Attribute 2 */
-#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C)
- /* OCP Error Status */
-#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10)
- /* CPU policy configuration */
-#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10)
- /* Misc configuration options */
-
-/* Central Interrupt Controller Registers */
-#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000)
- /* Central Interrupt registers */
-#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00)
- /* External interrupt config */
-#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04)
- /* CIC Interrupt Status */
-#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08)
- /* VPE0 Interrupt Mask */
-#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C)
- /* VPE1 Interrupt Mask */
-#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10)
- /* Thread Context 0 Int Mask */
-#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14)
- /* Thread Context 1 Int Mask */
-#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18)
- /* Thread Context 2 Int Mask */
-#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18)
- /* Thread Context 3 Int Mask */
-#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18)
- /* Thread Context 4 Int Mask */
-#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18)
-#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18)
-#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18)
-#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08)
-
-
-/*
- ***************************************************************************
- * Memory controller registers *
- ***************************************************************************
- */
-#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00)
-#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00)
-#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04)
-#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08)
-
-/*
- ***************************************************************************
- * PCI controller registers *
- ***************************************************************************
- */
-#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00)
-#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800)
-#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c)
-
-/*
- ########################################################################
- # Register content & macro definitions #
- ########################################################################
- */
-
-/*
- ***************************************************************************
- * DEV_ID defines *
- ***************************************************************************
- */
-#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */
-#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */
-#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */
-#define DEV_ID_FAMILY (0xff << 8) /* family ID code */
-#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */
-
-#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */
-#define MSP5000_ID (0x50 << 8)
-#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */
-#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */
-#define MSP4200_ID (0x42 << 8)
-#define MSP4000_ID (0x40 << 8)
-#define MSP2XXX_ID (0x20 << 8)
-#define MSPZEUS_ID (0x10 << 8)
-
-#define MSP2004_SUB_ID (0x0 << 16)
-#define MSP2005_SUB_ID (0x1 << 16)
-#define MSP2006_SUB_ID (0x1 << 16)
-#define MSP2007_SUB_ID (0x2 << 16)
-#define MSP2010_SUB_ID (0x3 << 16)
-#define MSP2015_SUB_ID (0x4 << 16)
-#define MSP2020_SUB_ID (0x5 << 16)
-#define MSP2100_SUB_ID (0x6 << 16)
-
-/*
- ***************************************************************************
- * RESET defines *
- ***************************************************************************
- */
-#define MSP_GR_RST (0x01 << 0) /* Global reset bit */
-#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */
-#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */
-#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */
-/* reserved */
-#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */
-#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */
-#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */
-#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */
-#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */
-#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */
-#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */
-#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */
-#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */
-
-/*
- ***************************************************************************
- * UART defines *
- ***************************************************************************
- */
-#define MSP_BASE_BAUD 25000000
-#define MSP_UART_REG_LEN 0x20
-
-/*
- ***************************************************************************
- * ELB defines *
- ***************************************************************************
- */
-#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */
-#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */
-
-/*
- ***************************************************************************
- * CIC defines *
- ***************************************************************************
- */
-
-/* CIC_EXT_CFG_REG */
-#define EXT_INT_POL(eirq) (1 << (eirq + 8))
-#define EXT_INT_EDGE(eirq) (1 << eirq)
-
-#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq))
-#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq))
-#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq))
-#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq))
-#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI
-#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO
-
-#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \
- ((reg & EXT_INT_EDGE(eirq)) == 0)
-#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq))
-#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq))
-#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \
- ((reg & EXT_INT_POL(eirq)) == 0)
-#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI
-#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO
-
-/*
- ***************************************************************************
- * Memory Controller defines *
- ***************************************************************************
- */
-
-/* Indirect memory controller registers */
-#define DDRC_CFG(n) (n)
-#define DDRC_DEBUG(n) (0x04 + n)
-#define DDRC_CTL(n) (0x40 + n)
-
-/* Macro to perform DDRC indirect write */
-#define DDRC_INDIRECT_WRITE(reg, mask, value) \
-({ \
- *MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \
- *MEM_SS_DATA = (value); \
- *MEM_SS_WRITE = 1; \
-})
-
-/*
- ***************************************************************************
- * SPI/MPI Mode *
- ***************************************************************************
- */
-#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */
-#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */
-#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */
-#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */
-
-/*
- ***************************************************************************
- * SPI/MPI Control Register *
- ***************************************************************************
- */
-#define SPI_MPI_RX_START 0x00000004 /* Start receive command */
-#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */
-#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */
-
-#endif /* !_ASM_MSP_REGS_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h
deleted file mode 100644
index 9a763eb5e5f5..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Defines for the MSP interrupt controller.
- *
- * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
- * Author: Carsten Langgaard, carstenl@mips.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#ifndef _MSP_SLP_INT_H
-#define _MSP_SLP_INT_H
-
-/*
- * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded
- * hierarchical system. The first level are the direct MIPS interrupts
- * and are assigned the interrupt range 0-7. The second level is the SLM
- * interrupt controller and is assigned the range 8-39. The third level
- * comprises the Peripherial block, the PCI block, the PCI MSI block and
- * the SLP. The PCI interrupts and the SLP errors are handled by the
- * relevant subsystems so the core interrupt code needs only concern
- * itself with the Peripheral block. These are assigned interrupts in
- * the range 40-71.
- */
-
-/*
- * IRQs directly connected to CPU
- */
-#define MSP_MIPS_INTBASE 0
-#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */
-#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */
-#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */
-#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */
-#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */
-#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */
-#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */
-#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */
-
-/*
- * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
- * These defines should be tied to the register definition for the SLM
- * interrupt routine. For now, just use hard-coded values.
- */
-#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8)
-#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0)
- /* External interrupt 0 */
-#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1)
- /* External interrupt 1 */
-#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2)
- /* External interrupt 2 */
-#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3)
- /* External interrupt 3 */
-/* Reserved 4-7 */
-
-/*
- *************************************************************************
- * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER *
- * Some MSP produces have this interrupt labelled as Voice and some are *
- * SEC mbox ... *
- *************************************************************************
- */
-#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8)
- /* Cascaded IRQ for Voice Engine*/
-#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9)
- /* TDM interrupt */
-#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10)
- /* Cascaded IRQ for MAC 0 */
-#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11)
- /* Cascaded IRQ for MAC 1 */
-#define MSP_INT_SEC (MSP_SLP_INTBASE + 12)
- /* IRQ for security engine */
-#define MSP_INT_PER (MSP_SLP_INTBASE + 13)
- /* Peripheral interrupt */
-#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14)
- /* SLP timer 0 */
-#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15)
- /* SLP timer 1 */
-#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16)
- /* SLP timer 2 */
-#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17)
- /* Cascaded MIPS timer */
-#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18)
- /* Block Copy */
-#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19)
- /* UART 0 */
-#define MSP_INT_PCI (MSP_SLP_INTBASE + 20)
- /* PCI subsystem */
-#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21)
- /* PCI doorbell */
-#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22)
- /* PCI Message Signal */
-#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23)
- /* PCI Block Copy 0 */
-#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24)
- /* PCI Block Copy 1 */
-#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25)
- /* SLP error condition */
-#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26)
- /* IRQ for MAC2 */
-/* Reserved 26-31 */
-
-/*
- * IRQs cascaded on SLP PER interrupt (MSP_INT_PER)
- */
-#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32)
-/* Reserved 0-1 */
-#define MSP_INT_UART1 (MSP_PER_INTBASE + 2)
- /* UART 1 */
-/* Reserved 3-5 */
-#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6)
- /* 2-wire */
-#define MSP_INT_TM0 (MSP_PER_INTBASE + 7)
- /* Peripheral timer block out 0 */
-#define MSP_INT_TM1 (MSP_PER_INTBASE + 8)
- /* Peripheral timer block out 1 */
-/* Reserved 9 */
-#define MSP_INT_SPRX (MSP_PER_INTBASE + 10)
- /* SPI RX complete */
-#define MSP_INT_SPTX (MSP_PER_INTBASE + 11)
- /* SPI TX complete */
-#define MSP_INT_GPIO (MSP_PER_INTBASE + 12)
- /* GPIO */
-#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13)
- /* Peripheral error */
-/* Reserved 14-31 */
-
-#endif /* !_MSP_SLP_INT_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h
deleted file mode 100644
index 3cc3edb336b6..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/******************************************************************
- * Copyright (c) 2000-2007 PMC-Sierra INC.
- *
- * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
- * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
- * SOFTWARE.
- */
-#ifndef MSP_USB_H_
-#define MSP_USB_H_
-
-#define NUM_USB_DEVS 1
-
-/* Register spaces for USB host 0 */
-#define MSP_USB0_MAB_START (MSP_USB0_BASE + 0x0)
-#define MSP_USB0_MAB_END (MSP_USB0_BASE + 0x17)
-#define MSP_USB0_ID_START (MSP_USB0_BASE + 0x40000)
-#define MSP_USB0_ID_END (MSP_USB0_BASE + 0x4008f)
-#define MSP_USB0_HS_START (MSP_USB0_BASE + 0x40100)
-#define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF)
-
-/* Register spaces for USB host 1 */
-#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0)
-#define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17)
-#define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000)
-#define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f)
-#define MSP_USB1_HS_START (MSP_USB1_BASE + 0x40100)
-#define MSP_USB1_HS_END (MSP_USB1_BASE + 0x401ff)
-
-/* USB Identification registers */
-struct msp_usbid_regs {
- u32 id; /* 0x0: Identification register */
- u32 hwgen; /* 0x4: General HW params */
- u32 hwhost; /* 0x8: Host HW params */
- u32 hwdev; /* 0xc: Device HW params */
- u32 hwtxbuf; /* 0x10: Tx buffer HW params */
- u32 hwrxbuf; /* 0x14: Rx buffer HW params */
- u32 reserved[26];
- u32 timer0_load; /* 0x80: General-purpose timer 0 load*/
- u32 timer0_ctrl; /* 0x84: General-purpose timer 0 control */
- u32 timer1_load; /* 0x88: General-purpose timer 1 load*/
- u32 timer1_ctrl; /* 0x8c: General-purpose timer 1 control */
-};
-
-/* MSBus to AMBA registers */
-struct msp_mab_regs {
- u32 isr; /* 0x0: Interrupt status */
- u32 imr; /* 0x4: Interrupt mask */
- u32 thcr0; /* 0x8: Transaction header capture 0 */
- u32 thcr1; /* 0xc: Transaction header capture 1 */
- u32 int_stat; /* 0x10: Interrupt status summary */
- u32 phy_cfg; /* 0x14: USB phy config */
-};
-
-/* EHCI registers */
-struct msp_usbhs_regs {
- u32 hciver; /* 0x0: Version and offset to operational regs */
- u32 hcsparams; /* 0x4: Host control structural parameters */
- u32 hccparams; /* 0x8: Host control capability parameters */
- u32 reserved0[5];
- u32 dciver; /* 0x20: Device interface version */
- u32 dccparams; /* 0x24: Device control capability parameters */
- u32 reserved1[6];
- u32 cmd; /* 0x40: USB command */
- u32 sts; /* 0x44: USB status */
- u32 int_ena; /* 0x48: USB interrupt enable */
- u32 frindex; /* 0x4c: Frame index */
- u32 reserved3;
- union {
- struct {
- u32 flb_addr; /* 0x54: Frame list base address */
- u32 next_async_addr; /* 0x58: next asynchronous addr */
- u32 ttctrl; /* 0x5c: embedded transaction translator
- async buffer status */
- u32 burst_size; /* 0x60: Controller burst size */
- u32 tx_fifo_ctrl; /* 0x64: Tx latency FIFO tuning */
- u32 reserved0[4];
- u32 endpt_nak; /* 0x78: Endpoint NAK */
- u32 endpt_nak_ena; /* 0x7c: Endpoint NAK enable */
- u32 cfg_flag; /* 0x80: Config flag */
- u32 port_sc1; /* 0x84: Port status & control 1 */
- u32 reserved1[7];
- u32 otgsc; /* 0xa4: OTG status & control */
- u32 mode; /* 0xa8: USB controller mode */
- } host;
-
- struct {
- u32 dev_addr; /* 0x54: Device address */
- u32 endpt_list_addr; /* 0x58: Endpoint list address */
- u32 reserved0[7];
- u32 endpt_nak; /* 0x74 */
- u32 endpt_nak_ctrl; /* 0x78 */
- u32 cfg_flag; /* 0x80 */
- u32 port_sc1; /* 0x84: Port status & control 1 */
- u32 reserved[7];
- u32 otgsc; /* 0xa4: OTG status & control */
- u32 mode; /* 0xa8: USB controller mode */
- u32 endpt_setup_stat; /* 0xac */
- u32 endpt_prime; /* 0xb0 */
- u32 endpt_flush; /* 0xb4 */
- u32 endpt_stat; /* 0xb8 */
- u32 endpt_complete; /* 0xbc */
- u32 endpt_ctrl0; /* 0xc0 */
- u32 endpt_ctrl1; /* 0xc4 */
- u32 endpt_ctrl2; /* 0xc8 */
- u32 endpt_ctrl3; /* 0xcc */
- } device;
- } u;
-};
-/*
- * Container for the more-generic platform_device.
- * This exists mainly as a way to map the non-standard register
- * spaces and make them accessible to the USB ISR.
- */
-struct mspusb_device {
- struct msp_mab_regs __iomem *mab_regs;
- struct msp_usbid_regs __iomem *usbid_regs;
- struct msp_usbhs_regs __iomem *usbhs_regs;
- struct platform_device dev;
-};
-
-#define to_mspusb_device(x) container_of((x), struct mspusb_device, dev)
-#define TO_HOST_ID(x) ((x) & 0x3)
-#endif /*MSP_USB_H_*/
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/war.h b/arch/mips/include/asm/mach-pmcs-msp71xx/war.h
deleted file mode 100644
index 31c546f58bb5..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/war.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H
-#define __ASM_MIPS_PMC_SIERRA_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
- defined(CONFIG_PMC_MSP7120_FPGA)
-#define MIPS34K_MISSED_ITLB_WAR 1
-#else
-#define MIPS34K_MISSED_ITLB_WAR 0
-#endif
-
-#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */