Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.8.  Also includes is a
  minor SSB cleanup as SSB code traditionally is merged through the MIPS
  tree:

  ATH25:
    - MIPS: Add default configuration for ath25

  Boot:
    - For zboot, copy appended dtb to the end of the kernel
    - store the appended dtb address in a variable

  BPF:
    - Fix off by one error in offset allocation

  Cobalt code:
    - Fix typos

  Core code:
    - debugfs_create_file returns NULL on error, so don't use IS_ERR for
      testing for errors.
    - Fix double locking issue in RM7000 S-cache code.  This would only
      affect RM7000 ARC systems on reboot.
    - Fix page table corruption on THP permission changes.
    - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
      David says, there are no compatibility issues raised by this fix.
    - Move some signal code around.
    - Rewrite r4k count/compare clockevent device registration such that
      min_delta_ticks/max_delta_ticks files are guaranteed to be
      initialized.
    - Only register r4k count/compare as clockevent device if we can
      assume the clock to be constant.
    - Fix MSA asm warnings in control reg accessors
    - uasm and tlbex fixes and tweaking.
    - Print segment physical address when EU=1.
    - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
    - CP: Allow booting by VP other than VP 0
    - Cache handling fixes and optimizations for r4k class caches
    - Add hotplug support for R6 processors
    - Cleanup hotplug bits in kconfig
    - traps: return correct si code for accessing nonmapped addresses
    - Remove cpu_has_safe_index_cacheops

  Lantiq:
    - Register IRQ handler for virtual IRQ number
    - Fix EIU interrupt loading code
    - Use the real EXIN count
    - Fix build error.

  Loongson 3:
    - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES

  Octeon:
    - Delete built-in DTB pruning code for D-Link DSR-1000N.
    - Clean up GPIO definitions in dlink_dsr-1000n.dts.
    - Add more LEDs to the DSR-100n DTS
    - Fix off by one in octeon_irq_gpio_map()
    - Typo fixes
    - Enable SATA by default in cavium_octeon_defconfig
    - Support readq/writeq()
    - Remove forced mappings of USB interrupts.
    - Ensure DMA descriptors are always in the low 4GB
    - Improve USB reset code for OCTEON II.

  Pistachio:
    - Add maintainers entry for pistachio SoC Support
    - Remove plat_setup_iocoherency

  Ralink:
    - Fix pwm UART in spis group pinmux.

  SSB:
    - Change bare unsigned to unsigned int to suit coding style

  Tools:
    - Fix reloc tool compiler warnings.

  Other:
    - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
  MIPS: mm: Fix definition of R6 cache instruction
  MIPS: tools: Fix relocs tool compiler warnings
  MIPS: Cobalt: Fix typo
  MIPS: Octeon: Fix typo
  MIPS: Lantiq: Fix build failure
  MIPS: Use CPHYSADDR to implement mips32 __pa
  MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
  MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
  MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
  MIPS: store the appended dtb address in a variable
  MIPS: ZBOOT: copy appended dtb to the end of the kernel
  MIPS: ralink: fix spis group pinmux
  MIPS: Factor o32 specific code into signal_o32.c
  MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
  MIPS: Use per-mm page to execute branch delay slot instructions
  MIPS: Modify error handling
  MIPS: c-r4k: Use SMP calls for CM indexed cache ops
  MIPS: c-r4k: Avoid small flush_icache_range SMP calls
  MIPS: c-r4k: Local flush_icache_range cache op override
  MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
  ...

1 files changed, 16 insertions, 15 deletions

diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index ff17669e30a3..8ac0e5994ed2 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -66,7 +66,7 @@ int gic_present;
 #endif
 
 static int exin_avail;
-static struct resource ltq_eiu_irq[MAX_EIU];
+static u32 ltq_eiu_irq[MAX_EIU];
 static void __iomem *ltq_icu_membase[MAX_IM];
 static void __iomem *ltq_eiu_membase;
 static struct irq_domain *ltq_domain;
@@ -75,7 +75,7 @@ static int ltq_perfcount_irq;
 int ltq_eiu_get_irq(int exin)
 {
 	if (exin < exin_avail)
-		return ltq_eiu_irq[exin].start;
+		return ltq_eiu_irq[exin];
 	return -1;
 }
 
@@ -125,8 +125,8 @@ static int ltq_eiu_settype(struct irq_data *d, unsigned int type)
 {
 	int i;
 
-	for (i = 0; i < MAX_EIU; i++) {
-		if (d->hwirq == ltq_eiu_irq[i].start) {
+	for (i = 0; i < exin_avail; i++) {
+		if (d->hwirq == ltq_eiu_irq[i]) {
 			int val = 0;
 			int edge = 0;
 
@@ -173,8 +173,8 @@ static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
 	int i;
 
 	ltq_enable_irq(d);
-	for (i = 0; i < MAX_EIU; i++) {
-		if (d->hwirq == ltq_eiu_irq[i].start) {
+	for (i = 0; i < exin_avail; i++) {
+		if (d->hwirq == ltq_eiu_irq[i]) {
 			/* by default we are low level triggered */
 			ltq_eiu_settype(d, IRQF_TRIGGER_LOW);
 			/* clear all pending */
@@ -195,8 +195,8 @@ static void ltq_shutdown_eiu_irq(struct irq_data *d)
 	int i;
 
 	ltq_disable_irq(d);
-	for (i = 0; i < MAX_EIU; i++) {
-		if (d->hwirq == ltq_eiu_irq[i].start) {
+	for (i = 0; i < exin_avail; i++) {
+		if (d->hwirq == ltq_eiu_irq[i]) {
 			/* disable */
 			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~BIT(i),
 				LTQ_EIU_EXIN_INEN);
@@ -206,7 +206,7 @@ static void ltq_shutdown_eiu_irq(struct irq_data *d)
 }
 
 static struct irq_chip ltq_irq_type = {
-	"icu",
+	.name = "icu",
 	.irq_enable = ltq_enable_irq,
 	.irq_disable = ltq_disable_irq,
 	.irq_unmask = ltq_enable_irq,
@@ -216,7 +216,7 @@ static struct irq_chip ltq_irq_type = {
 };
 
 static struct irq_chip ltq_eiu_type = {
-	"eiu",
+	.name = "eiu",
 	.irq_startup = ltq_startup_eiu_irq,
 	.irq_shutdown = ltq_shutdown_eiu_irq,
 	.irq_enable = ltq_enable_irq,
@@ -341,10 +341,10 @@ static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
 		return 0;
 
 	for (i = 0; i < exin_avail; i++)
-		if (hw == ltq_eiu_irq[i].start)
+		if (hw == ltq_eiu_irq[i])
 			chip = &ltq_eiu_type;
 
-	irq_set_chip_and_handler(hw, chip, handle_level_irq);
+	irq_set_chip_and_handler(irq, chip, handle_level_irq);
 
 	return 0;
 }
@@ -439,14 +439,15 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
 	if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
 		/* find out how many external irq sources we have */
-		exin_avail = of_irq_count(eiu_node);
+		exin_avail = of_property_count_u32_elems(eiu_node,
+							 "lantiq,eiu-irqs");
 
 		if (exin_avail > MAX_EIU)
 			exin_avail = MAX_EIU;
 
-		ret = of_irq_to_resource_table(eiu_node,
+		ret = of_property_read_u32_array(eiu_node, "lantiq,eiu-irqs",
 						ltq_eiu_irq, exin_avail);
-		if (ret != exin_avail)
+		if (ret)
 			panic("failed to load external irq resources");
 
 		if (!request_mem_region(res.start, resource_size(&res),