Merge tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Time, timekeeping and related device driver updates:

  Core:

   - A set of fixes, cleanups and enhancements to the posix timer code:

       - Prevent another possible live lock scenario in the exit() path,
         which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.

       - Fix a loop termination issue which was reported syzcaller/KSAN
         in the posix timer ID allocation code.

         That triggered a deeper look into the posix-timer code which
         unearthed more small issues.

       - Add missing READ/WRITE_ONCE() annotations

       - Fix or remove completely outdated comments

       - Document places which are subtle and completely undocumented.

   - Add missing hrtimer modes to the trace event decoder

   - Small cleanups and enhancements all over the place

  Drivers:

   - Rework the Hyper-V clocksource and sched clock setup code

   - Remove a deprecated clocksource driver

   - Small fixes and enhancements all over the place"

* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
  dt-bindings: timers: Add Ralink SoCs timer
  clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
  dt-bindings: timer: brcm,kona-timer: convert to YAML
  clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
  clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
  hrtimer: Add missing sparse annotations to hrtimer locking
  clocksource/drivers/imx-gpt: Use only a single name for functions
  clocksource/drivers/loongson1: Move PWM timer to clocksource framework
  dt-bindings: timer: Add Loongson-1 clocksource
  MIPS: Loongson32: Remove deprecated PWM timer clocksource
  clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
  tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
  posix-timers: Add sys_ni_posix_timers() prototype
  tick/rcu: Fix bogus ratelimit condition
  alarmtimer: Remove unnecessary (void *) cast
  alarmtimer: Remove unnecessary initialization of variable 'ret'
  posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
  posix-timers: Polish coding style in a few places
  posix-timers: Remove pointless comments
  ...

4 files changed, 0 insertions, 273 deletions

diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
index eb3ddbec1752..d8f9dec0ecc3 100644
--- a/arch/mips/include/asm/mach-loongson32/loongson1.h
+++ b/arch/mips/include/asm/mach-loongson32/loongson1.h
@@ -47,7 +47,6 @@
 
 #include <regs-clk.h>
 #include <regs-mux.h>
-#include <regs-pwm.h>
 #include <regs-rtc.h>
 #include <regs-wdt.h>
 
diff --git a/arch/mips/include/asm/mach-loongson32/regs-pwm.h b/arch/mips/include/asm/mach-loongson32/regs-pwm.h
deleted file mode 100644
index ec870c82d492..000000000000
--- a/arch/mips/include/asm/mach-loongson32/regs-pwm.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 PWM Register Definitions.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_REGS_PWM_H
-#define __ASM_MACH_LOONGSON32_REGS_PWM_H
-
-/* Loongson 1 PWM Timer Register Definitions */
-#define PWM_CNT			0x0
-#define PWM_HRC			0x4
-#define PWM_LRC			0x8
-#define PWM_CTRL		0xc
-
-/* PWM Control Register Bits */
-#define CNT_RST			BIT(7)
-#define INT_SR			BIT(6)
-#define INT_EN			BIT(5)
-#define PWM_SINGLE		BIT(4)
-#define PWM_OE			BIT(3)
-#define CNT_EN			BIT(0)
-
-#endif /* __ASM_MACH_LOONGSON32_REGS_PWM_H */
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 2ef9da0016df..a7c500959577 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -35,41 +35,4 @@ config LOONGSON1_LS1C
 	select COMMON_CLK
 endchoice
 
-menuconfig CEVT_CSRC_LS1X
-	bool "Use PWM Timer for clockevent/clocksource"
-	select MIPS_EXTERNAL_TIMER
-	depends on CPU_LOONGSON32
-	help
-	  This option changes the default clockevent/clocksource to PWM Timer,
-	  and is required by Loongson1 CPUFreq support.
-
-	  If unsure, say N.
-
-choice
-	prompt "Select clockevent/clocksource"
-	depends on CEVT_CSRC_LS1X
-	default TIMER_USE_PWM0
-
-config TIMER_USE_PWM0
-	bool "Use PWM Timer 0"
-	help
-	  Use PWM Timer 0 as the default clockevent/clocksourcer.
-
-config TIMER_USE_PWM1
-	bool "Use PWM Timer 1"
-	help
-	  Use PWM Timer 1 as the default clockevent/clocksourcer.
-
-config TIMER_USE_PWM2
-	bool "Use PWM Timer 2"
-	help
-	  Use PWM Timer 2 as the default clockevent/clocksourcer.
-
-config TIMER_USE_PWM3
-	bool "Use PWM Timer 3"
-	help
-	  Use PWM Timer 3 as the default clockevent/clocksourcer.
-
-endchoice
-
 endif # MACH_LOONGSON32
diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c
index 965c04aa56fd..74ad2b17918d 100644
--- a/arch/mips/loongson32/common/time.c
+++ b/arch/mips/loongson32/common/time.c
@@ -5,208 +5,8 @@
 
 #include <linux/clk.h>
 #include <linux/of_clk.h>
-#include <linux/interrupt.h>
-#include <linux/sizes.h>
 #include <asm/time.h>
 
-#include <loongson1.h>
-#include <platform.h>
-
-#ifdef CONFIG_CEVT_CSRC_LS1X
-
-#if defined(CONFIG_TIMER_USE_PWM1)
-#define LS1X_TIMER_BASE	LS1X_PWM1_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM1_IRQ
-
-#elif defined(CONFIG_TIMER_USE_PWM2)
-#define LS1X_TIMER_BASE	LS1X_PWM2_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM2_IRQ
-
-#elif defined(CONFIG_TIMER_USE_PWM3)
-#define LS1X_TIMER_BASE	LS1X_PWM3_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM3_IRQ
-
-#else
-#define LS1X_TIMER_BASE	LS1X_PWM0_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM0_IRQ
-#endif
-
-DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
-
-static void __iomem *timer_reg_base;
-static uint32_t ls1x_jiffies_per_tick;
-
-static inline void ls1x_pwmtimer_set_period(uint32_t period)
-{
-	__raw_writel(period, timer_reg_base + PWM_HRC);
-	__raw_writel(period, timer_reg_base + PWM_LRC);
-}
-
-static inline void ls1x_pwmtimer_restart(void)
-{
-	__raw_writel(0x0, timer_reg_base + PWM_CNT);
-	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
-}
-
-void __init ls1x_pwmtimer_init(void)
-{
-	timer_reg_base = ioremap(LS1X_TIMER_BASE, SZ_16);
-	if (!timer_reg_base)
-		panic("Failed to remap timer registers");
-
-	ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
-
-	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
-	ls1x_pwmtimer_restart();
-}
-
-static u64 ls1x_clocksource_read(struct clocksource *cs)
-{
-	unsigned long flags;
-	int count;
-	u32 jifs;
-	static int old_count;
-	static u32 old_jifs;
-
-	raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
-	/*
-	 * Although our caller may have the read side of xtime_lock,
-	 * this is now a seqlock, and we are cheating in this routine
-	 * by having side effects on state that we cannot undo if
-	 * there is a collision on the seqlock and our caller has to
-	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
-	 * jiffies as volatile despite the lock.  We read jiffies
-	 * before latching the timer count to guarantee that although
-	 * the jiffies value might be older than the count (that is,
-	 * the counter may underflow between the last point where
-	 * jiffies was incremented and the point where we latch the
-	 * count), it cannot be newer.
-	 */
-	jifs = jiffies;
-	/* read the count */
-	count = __raw_readl(timer_reg_base + PWM_CNT);
-
-	/*
-	 * It's possible for count to appear to go the wrong way for this
-	 * reason:
-	 *
-	 *  The timer counter underflows, but we haven't handled the resulting
-	 *  interrupt and incremented jiffies yet.
-	 *
-	 * Previous attempts to handle these cases intelligently were buggy, so
-	 * we just do the simple thing now.
-	 */
-	if (count < old_count && jifs == old_jifs)
-		count = old_count;
-
-	old_count = count;
-	old_jifs = jifs;
-
-	raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
-
-	return (u64) (jifs * ls1x_jiffies_per_tick) + count;
-}
-
-static struct clocksource ls1x_clocksource = {
-	.name		= "ls1x-pwmtimer",
-	.read		= ls1x_clocksource_read,
-	.mask		= CLOCKSOURCE_MASK(24),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
-{
-	struct clock_event_device *cd = devid;
-
-	ls1x_pwmtimer_restart();
-	cd->event_handler(cd);
-
-	return IRQ_HANDLED;
-}
-
-static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
-	ls1x_pwmtimer_restart();
-	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
-	raw_spin_unlock(&ls1x_timer_lock);
-
-	return 0;
-}
-
-static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
-	raw_spin_unlock(&ls1x_timer_lock);
-
-	return 0;
-}
-
-static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	__raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
-		     timer_reg_base + PWM_CTRL);
-	raw_spin_unlock(&ls1x_timer_lock);
-
-	return 0;
-}
-
-static int ls1x_clockevent_set_next(unsigned long evt,
-				    struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	ls1x_pwmtimer_set_period(evt);
-	ls1x_pwmtimer_restart();
-	raw_spin_unlock(&ls1x_timer_lock);
-
-	return 0;
-}
-
-static struct clock_event_device ls1x_clockevent = {
-	.name			= "ls1x-pwmtimer",
-	.features		= CLOCK_EVT_FEAT_PERIODIC,
-	.rating			= 300,
-	.irq			= LS1X_TIMER_IRQ,
-	.set_next_event		= ls1x_clockevent_set_next,
-	.set_state_shutdown	= ls1x_clockevent_set_state_shutdown,
-	.set_state_periodic	= ls1x_clockevent_set_state_periodic,
-	.set_state_oneshot	= ls1x_clockevent_set_state_shutdown,
-	.tick_resume		= ls1x_clockevent_tick_resume,
-};
-
-static void __init ls1x_time_init(void)
-{
-	struct clock_event_device *cd = &ls1x_clockevent;
-	int ret;
-
-	if (!mips_hpt_frequency)
-		panic("Invalid timer clock rate");
-
-	ls1x_pwmtimer_init();
-
-	clockevent_set_clock(cd, mips_hpt_frequency);
-	cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
-	cd->max_delta_ticks = 0xffffff;
-	cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
-	cd->min_delta_ticks = 0x000300;
-	cd->cpumask = cpumask_of(smp_processor_id());
-	clockevents_register_device(cd);
-
-	ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
-	ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
-	if (ret)
-		panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
-
-	if (request_irq(LS1X_TIMER_IRQ, ls1x_clockevent_isr,
-			IRQF_PERCPU | IRQF_TIMER, "ls1x-pwmtimer",
-			&ls1x_clockevent))
-		pr_err("Failed to register ls1x-pwmtimer interrupt\n");
-}
-#endif /* CONFIG_CEVT_CSRC_LS1X */
-
 void __init plat_time_init(void)
 {
 	struct clk *clk = NULL;
@@ -214,20 +14,10 @@ void __init plat_time_init(void)
 	/* initialize LS1X clocks */
 	of_clk_init(NULL);
 
-#ifdef CONFIG_CEVT_CSRC_LS1X
-	/* setup LS1X PWM timer */
-	clk = clk_get(NULL, "ls1x-pwmtimer");
-	if (IS_ERR(clk))
-		panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
-
-	mips_hpt_frequency = clk_get_rate(clk);
-	ls1x_time_init();
-#else
 	/* setup mips r4k timer */
 	clk = clk_get(NULL, "cpu_clk");
 	if (IS_ERR(clk))
 		panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
 
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
-#endif /* CONFIG_CEVT_CSRC_LS1X */
 }