mn10300: add the MN10300/AM33 architecture to the kernel

Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 223 insertions, 0 deletions

diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c
new file mode 100644
index 000000000000..e705f25ad5ff
--- /dev/null
+++ b/arch/mn10300/kernel/fpu.c
@@ -0,0 +1,223 @@
+/* MN10300 FPU management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/uaccess.h>
+#include <asm/fpu.h>
+#include <asm/elf.h>
+#include <asm/exceptions.h>
+
+struct task_struct *fpu_state_owner;
+
+/*
+ * handle an exception due to the FPU being disabled
+ */
+asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code)
+{
+	struct task_struct *tsk = current;
+
+	if (!user_mode(regs))
+		die_if_no_fixup("An FPU Disabled exception happened in"
+				" kernel space\n",
+				regs, code);
+
+#ifdef CONFIG_FPU
+	preempt_disable();
+
+	/* transfer the last process's FPU state to memory */
+	if (fpu_state_owner) {
+		fpu_save(&fpu_state_owner->thread.fpu_state);
+		fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+	}
+
+	/* the current process now owns the FPU state */
+	fpu_state_owner = tsk;
+	regs->epsw |= EPSW_FE;
+
+	/* load the FPU with the current process's FPU state or invent a new
+	 * clean one if the process doesn't have one */
+	if (is_using_fpu(tsk)) {
+		fpu_restore(&tsk->thread.fpu_state);
+	} else {
+		fpu_init_state();
+		set_using_fpu(tsk);
+	}
+
+	preempt_enable();
+#else
+	{
+		siginfo_t info;
+
+		info.si_signo = SIGFPE;
+		info.si_errno = 0;
+		info.si_addr = (void *) tsk->thread.uregs->pc;
+		info.si_code = FPE_FLTINV;
+
+		force_sig_info(SIGFPE, &info, tsk);
+	}
+#endif  /* CONFIG_FPU */
+}
+
+/*
+ * handle an FPU operational exception
+ * - there's a possibility that if the FPU is asynchronous, the signal might
+ *   be meant for a process other than the current one
+ */
+asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code)
+{
+	struct task_struct *tsk = fpu_state_owner;
+	siginfo_t info;
+
+	if (!user_mode(regs))
+		die_if_no_fixup("An FPU Operation exception happened in"
+				" kernel space\n",
+				regs, code);
+
+	if (!tsk)
+		die_if_no_fixup("An FPU Operation exception happened,"
+				" but the FPU is not in use",
+				regs, code);
+
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_addr = (void *) tsk->thread.uregs->pc;
+	info.si_code = FPE_FLTINV;
+
+#ifdef CONFIG_FPU
+	{
+		u32 fpcr;
+
+		/* get FPCR (we need to enable the FPU whilst we do this) */
+		asm volatile("	or	%1,epsw		\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+			     "	nop			\n"
+			     "	nop			\n"
+			     "	nop			\n"
+#endif
+			     "	fmov	fpcr,%0		\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+			     "	nop			\n"
+			     "	nop			\n"
+			     "	nop			\n"
+#endif
+			     "	and	%2,epsw		\n"
+			     : "=&d"(fpcr)
+			     : "i"(EPSW_FE), "i"(~EPSW_FE)
+			     );
+
+		if (fpcr & FPCR_EC_Z)
+			info.si_code = FPE_FLTDIV;
+		else if	(fpcr & FPCR_EC_O)
+			info.si_code = FPE_FLTOVF;
+		else if	(fpcr & FPCR_EC_U)
+			info.si_code = FPE_FLTUND;
+		else if	(fpcr & FPCR_EC_I)
+			info.si_code = FPE_FLTRES;
+	}
+#endif
+
+	force_sig_info(SIGFPE, &info, tsk);
+}
+
+/*
+ * save the FPU state to a signal context
+ */
+int fpu_setup_sigcontext(struct fpucontext *fpucontext)
+{
+#ifdef CONFIG_FPU
+	struct task_struct *tsk = current;
+
+	if (!is_using_fpu(tsk))
+		return 0;
+
+	/* transfer the current FPU state to memory and cause fpu_init() to be
+	 * triggered by the next attempted FPU operation by the current
+	 * process.
+	 */
+	preempt_disable();
+
+	if (fpu_state_owner == tsk) {
+		fpu_save(&tsk->thread.fpu_state);
+		fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+		fpu_state_owner = NULL;
+	}
+
+	preempt_enable();
+
+	/* we no longer have a valid current FPU state */
+	clear_using_fpu(tsk);
+
+	/* transfer the saved FPU state onto the userspace stack */
+	if (copy_to_user(fpucontext,
+			 &tsk->thread.fpu_state,
+			 min(sizeof(struct fpu_state_struct),
+			     sizeof(struct fpucontext))))
+		return -1;
+
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+/*
+ * kill a process's FPU state during restoration after signal handling
+ */
+void fpu_kill_state(struct task_struct *tsk)
+{
+#ifdef CONFIG_FPU
+	/* disown anything left in the FPU */
+	preempt_disable();
+
+	if (fpu_state_owner == tsk) {
+		fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+		fpu_state_owner = NULL;
+	}
+
+	preempt_enable();
+#endif
+	/* we no longer have a valid current FPU state */
+	clear_using_fpu(tsk);
+}
+
+/*
+ * restore the FPU state from a signal context
+ */
+int fpu_restore_sigcontext(struct fpucontext *fpucontext)
+{
+	struct task_struct *tsk = current;
+	int ret;
+
+	/* load up the old FPU state */
+	ret = copy_from_user(&tsk->thread.fpu_state,
+			     fpucontext,
+			     min(sizeof(struct fpu_state_struct),
+				 sizeof(struct fpucontext)));
+	if (!ret)
+		set_using_fpu(tsk);
+
+	return ret;
+}
+
+/*
+ * fill in the FPU structure for a core dump
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg)
+{
+	struct task_struct *tsk = current;
+	int fpvalid;
+
+	fpvalid = is_using_fpu(tsk);
+	if (fpvalid) {
+		unlazy_fpu(tsk);
+		memcpy(fpreg, &tsk->thread.fpu_state, sizeof(*fpreg));
+	}
+
+	return fpvalid;
+}