mn10300: Remove the architecture

Remove the MN10300 arch as the hardware is defunct.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Masahiro Yamada <yamada.masahiro@socionext.com>
cc: linux-am33-list@redhat.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 505 deletions

diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
deleted file mode 100644
index 3dfe2d31c67b..000000000000
--- a/arch/mn10300/unit-asb2305/pci.c
+++ /dev/null
@@ -1,505 +0,0 @@
-/* ASB2305 PCI support
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * Derived from arch/i386/kernel/pci-pc.c
- *	(c) 1999--2000 Martin Mares <mj@suse.cz>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include "pci-asb2305.h"
-
-unsigned int pci_probe = 1;
-
-struct pci_ops *pci_root_ops;
-
-/*
- * The accessible PCI window does not cover the entire CPU address space, but
- * there are devices we want to access outside of that window, so we need to
- * insert specific PCI bus resources instead of using the platform-level bus
- * resources directly for the PCI root bus.
- *
- * These are configured and inserted by pcibios_init().
- */
-static struct resource pci_ioport_resource = {
-	.name	= "PCI IO",
-	.start	= 0xbe000000,
-	.end	= 0xbe03ffff,
-	.flags	= IORESOURCE_IO,
-};
-
-static struct resource pci_iomem_resource = {
-	.name	= "PCI mem",
-	.start	= 0xb8000000,
-	.end	= 0xbbffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-/*
- * Functions for accessing PCI configuration space
- */
-
-#define CONFIG_CMD(bus, devfn, where) \
-	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-#define MEM_PAGING_REG	(*(volatile __u32 *) 0xBFFFFFF4)
-#define CONFIG_ADDRESS	(*(volatile __u32 *) 0xBFFFFFF8)
-#define CONFIG_DATAL(X)	(*(volatile __u32 *) 0xBFFFFFFC)
-#define CONFIG_DATAW(X)	(*(volatile __u16 *) (0xBFFFFFFC + ((X) & 2)))
-#define CONFIG_DATAB(X)	(*(volatile __u8  *) (0xBFFFFFFC + ((X) & 3)))
-
-#define BRIDGEREGB(X)	(*(volatile __u8  *) (0xBE040000 + (X)))
-#define BRIDGEREGW(X)	(*(volatile __u16 *) (0xBE040000 + (X)))
-#define BRIDGEREGL(X)	(*(volatile __u32 *) (0xBE040000 + (X)))
-
-static inline int __query(const struct pci_bus *bus, unsigned int devfn)
-{
-#if 0
-	return bus->number == 0 && (devfn == PCI_DEVFN(0, 0));
-	return bus->number == 1;
-	return bus->number == 0 &&
-		(devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0));
-#endif
-	return 1;
-}
-
-/*
- *
- */
-static int pci_ampci_read_config_byte(struct pci_bus *bus, unsigned int devfn,
-				      int where, u32 *_value)
-{
-	u32 rawval, value;
-
-	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
-		value = BRIDGEREGB(where);
-		__pcbdebug("=> %02hx", &BRIDGEREGL(where), value);
-	} else {
-		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
-		rawval = CONFIG_ADDRESS;
-		value = CONFIG_DATAB(where);
-		if (__query(bus, devfn))
-			__pcidebug("=> %02hx", bus, devfn, where, value);
-	}
-
-	*_value = value;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_ampci_read_config_word(struct pci_bus *bus, unsigned int devfn,
-				      int where, u32 *_value)
-{
-	u32 rawval, value;
-
-	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
-		value = BRIDGEREGW(where);
-		__pcbdebug("=> %04hx", &BRIDGEREGL(where), value);
-	} else {
-		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
-		rawval = CONFIG_ADDRESS;
-		value = CONFIG_DATAW(where);
-		if (__query(bus, devfn))
-			__pcidebug("=> %04hx", bus, devfn, where, value);
-	}
-
-	*_value = value;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_ampci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
-				       int where, u32 *_value)
-{
-	u32 rawval, value;
-
-	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
-		value = BRIDGEREGL(where);
-		__pcbdebug("=> %08x", &BRIDGEREGL(where), value);
-	} else {
-		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
-		rawval = CONFIG_ADDRESS;
-		value = CONFIG_DATAL(where);
-		if (__query(bus, devfn))
-			__pcidebug("=> %08x", bus, devfn, where, value);
-	}
-
-	*_value = value;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_ampci_write_config_byte(struct pci_bus *bus, unsigned int devfn,
-				       int where, u8 value)
-{
-	u32 rawval;
-
-	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
-		__pcbdebug("<= %02x", &BRIDGEREGB(where), value);
-		BRIDGEREGB(where) = value;
-	} else {
-		if (bus->number == 0 &&
-		    (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0))
-		    )
-			__pcidebug("<= %02x", bus, devfn, where, value);
-		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
-		rawval = CONFIG_ADDRESS;
-		CONFIG_DATAB(where) = value;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_ampci_write_config_word(struct pci_bus *bus, unsigned int devfn,
-				       int where, u16 value)
-{
-	u32 rawval;
-
-	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
-		__pcbdebug("<= %04hx", &BRIDGEREGW(where), value);
-		BRIDGEREGW(where) = value;
-	} else {
-		if (__query(bus, devfn))
-			__pcidebug("<= %04hx", bus, devfn, where, value);
-		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
-		rawval = CONFIG_ADDRESS;
-		CONFIG_DATAW(where) = value;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_ampci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
-					int where, u32 value)
-{
-	u32 rawval;
-
-	if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
-		__pcbdebug("<= %08x", &BRIDGEREGL(where), value);
-		BRIDGEREGL(where) = value;
-	} else {
-		if (__query(bus, devfn))
-			__pcidebug("<= %08x", bus, devfn, where, value);
-		CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
-		rawval = CONFIG_ADDRESS;
-		CONFIG_DATAL(where) = value;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_ampci_read_config(struct pci_bus *bus, unsigned int devfn,
-				 int where, int size, u32 *val)
-{
-	switch (size) {
-	case 1:
-		return pci_ampci_read_config_byte(bus, devfn, where, val);
-	case 2:
-		return pci_ampci_read_config_word(bus, devfn, where, val);
-	case 4:
-		return pci_ampci_read_config_dword(bus, devfn, where, val);
-	default:
-		BUG();
-		return -EOPNOTSUPP;
-	}
-}
-
-static int pci_ampci_write_config(struct pci_bus *bus, unsigned int devfn,
-				  int where, int size, u32 val)
-{
-	switch (size) {
-	case 1:
-		return pci_ampci_write_config_byte(bus, devfn, where, val);
-	case 2:
-		return pci_ampci_write_config_word(bus, devfn, where, val);
-	case 4:
-		return pci_ampci_write_config_dword(bus, devfn, where, val);
-	default:
-		BUG();
-		return -EOPNOTSUPP;
-	}
-}
-
-static struct pci_ops pci_direct_ampci = {
-	.read = pci_ampci_read_config,
-	.write = pci_ampci_write_config,
-};
-
-/*
- * Before we decide to use direct hardware access mechanisms, we try to do some
- * trivial checks to ensure it at least _seems_ to be working -- we just test
- * whether bus 00 contains a host bridge (this is similar to checking
- * techniques used in XFree86, but ours should be more reliable since we
- * attempt to make use of direct access hints provided by the PCI BIOS).
- *
- * This should be close to trivial, but it isn't, because there are buggy
- * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
- */
-static int __init pci_sanity_check(struct pci_ops *o)
-{
-	struct pci_bus bus;		/* Fake bus and device */
-	u32 x;
-
-	bus.number = 0;
-
-	if ((!o->read(&bus, 0, PCI_CLASS_DEVICE, 2, &x) &&
-	     (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)) ||
-	    (!o->read(&bus, 0, PCI_VENDOR_ID, 2, &x) &&
-	     (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
-		return 1;
-
-	printk(KERN_ERR "PCI: Sanity check failed\n");
-	return 0;
-}
-
-static int __init pci_check_direct(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	/*
-	 * Check if access works.
-	 */
-	if (pci_sanity_check(&pci_direct_ampci)) {
-		local_irq_restore(flags);
-		printk(KERN_INFO "PCI: Using configuration ampci\n");
-		request_mem_region(0xBE040000, 256, "AMPCI bridge");
-		request_mem_region(0xBFFFFFF4, 12, "PCI ampci");
-		request_mem_region(0xBC000000, 32 * 1024 * 1024, "PCI SRAM");
-		return 0;
-	}
-
-	local_irq_restore(flags);
-	return -ENODEV;
-}
-
-static void pcibios_fixup_device_resources(struct pci_dev *dev)
-{
-	int idx;
-
-	if (!dev->bus)
-		return;
-
-	for (idx = 0; idx < PCI_BRIDGE_RESOURCES; idx++) {
-		struct resource *r = &dev->resource[idx];
-
-		if (!r->flags || r->parent || !r->start)
-			continue;
-
-		pci_claim_resource(dev, idx);
-	}
-}
-
-static void pcibios_fixup_bridge_resources(struct pci_dev *dev)
-{
-	int idx;
-
-	if (!dev->bus)
-		return;
-
-	for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
-		struct resource *r = &dev->resource[idx];
-
-		if (!r->flags || r->parent || !r->start)
-			continue;
-
-		pci_claim_bridge_resource(dev, idx);
-	}
-}
-
-/*
- *  Called after each bus is probed, but before its children
- *  are examined.
- */
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	if (bus->self) {
-		pci_read_bridge_bases(bus);
-		pcibios_fixup_bridge_resources(bus->self);
-	}
-
-	list_for_each_entry(dev, &bus->devices, bus_list)
-		pcibios_fixup_device_resources(dev);
-}
-
-/*
- * Initialization. Try all known PCI access methods. Note that we support
- * using both PCI BIOS and direct access: in such cases, we use I/O ports
- * to access config space, but we still keep BIOS order of cards to be
- * compatible with 2.0.X. This should go away some day.
- */
-static int __init pcibios_init(void)
-{
-	resource_size_t io_offset, mem_offset;
-	LIST_HEAD(resources);
-	struct pci_bus *bus;
-
-	ioport_resource.start	= 0xA0000000;
-	ioport_resource.end	= 0xDFFFFFFF;
-	iomem_resource.start	= 0xA0000000;
-	iomem_resource.end	= 0xDFFFFFFF;
-
-	if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
-		panic("Unable to insert PCI IOMEM resource\n");
-	if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
-		panic("Unable to insert PCI IOPORT resource\n");
-
-	if (!pci_probe)
-		return 0;
-
-	if (pci_check_direct() < 0) {
-		printk(KERN_WARNING "PCI: No PCI bus detected\n");
-		return 0;
-	}
-
-	printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
-	       MEM_PAGING_REG);
-
-	io_offset = pci_ioport_resource.start -
-	    (pci_ioport_resource.start & 0x00ffffff);
-	mem_offset = pci_iomem_resource.start -
-	    ((pci_iomem_resource.start & 0x03ffffff) | MEM_PAGING_REG);
-
-	pci_add_resource_offset(&resources, &pci_ioport_resource, io_offset);
-	pci_add_resource_offset(&resources, &pci_iomem_resource, mem_offset);
-	bus = pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources);
-	if (!bus)
-		return 0;
-
-	pcibios_irq_init();
-	pcibios_fixup_irqs();
-	pcibios_resource_survey();
-	pci_bus_add_devices(bus);
-	return 0;
-}
-
-arch_initcall(pcibios_init);
-
-char *__init pcibios_setup(char *str)
-{
-	if (!strcmp(str, "off")) {
-		pci_probe = 0;
-		return NULL;
-	}
-
-	return str;
-}
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	int err;
-
-	err = pci_enable_resources(dev, mask);
-	if (err == 0)
-		pcibios_enable_irq(dev);
-	return err;
-}
-
-/*
- * disable the ethernet chipset
- */
-static void __init unit_disable_pcnet(struct pci_bus *bus, struct pci_ops *o)
-{
-	u32 x;
-
-	bus->number = 0;
-
-	o->read (bus, PCI_DEVFN(2, 0), PCI_VENDOR_ID,		4, &x);
-	o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND,		2, &x);
-	x |= PCI_COMMAND_MASTER |
-		PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-		PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
-	o->write(bus, PCI_DEVFN(2, 0), PCI_COMMAND,		2, x);
-	o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND,		2, &x);
-	o->write(bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0,	4, 0x00030001);
-	o->read (bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0,	4, &x);
-
-#define RDP (*(volatile u32 *) 0xBE030010)
-#define RAP (*(volatile u32 *) 0xBE030014)
-#define __set_RAP(X) do { RAP = (X); x = RAP; } while (0)
-#define __set_RDP(X) do { RDP = (X); x = RDP; } while (0)
-#define __get_RDP() ({ RDP & 0xffff; })
-
-	__set_RAP(0);
-	__set_RDP(0x0004);	/* CSR0 = STOP */
-
-	__set_RAP(88);		/* check CSR88 indicates an Am79C973 */
-	BUG_ON(__get_RDP() != 0x5003);
-
-	for (x = 0; x < 100; x++)
-		asm volatile("nop");
-
-	__set_RDP(0x0004);	/* CSR0 = STOP */
-}
-
-/*
- * initialise the unit hardware
- */
-asmlinkage void __init unit_pci_init(void)
-{
-	struct pci_bus bus;		/* Fake bus and device */
-	struct pci_ops *o = &pci_direct_ampci;
-	u32 x;
-
-	set_intr_level(XIRQ1, NUM2GxICR_LEVEL(CONFIG_PCI_IRQ_LEVEL));
-
-	memset(&bus, 0, sizeof(bus));
-
-	MEM_PAGING_REG = 0xE8000000;
-
-	/* we need to set up the bridge _now_ or we won't be able to access the
-	 * PCI config registers
-	 */
-	BRIDGEREGW(PCI_COMMAND) |=
-		PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
-		PCI_COMMAND_MEMORY | PCI_COMMAND_IO | PCI_COMMAND_MASTER;
-	BRIDGEREGW(PCI_STATUS)		= 0xF800;
-	BRIDGEREGB(PCI_LATENCY_TIMER)	= 0x10;
-	BRIDGEREGL(PCI_BASE_ADDRESS_0)	= 0x80000000;
-	BRIDGEREGB(PCI_INTERRUPT_LINE)	= 1;
-	BRIDGEREGL(0x48)		= 0x98000000;	/* AMPCI base addr */
-	BRIDGEREGB(0x41)		= 0x00;		/* secondary bus
-							 * number */
-	BRIDGEREGB(0x42)		= 0x01;		/* subordinate bus
-							 * number */
-	BRIDGEREGB(0x44)		= 0x01;
-	BRIDGEREGL(0x50)		= 0x00000001;
-	BRIDGEREGL(0x58)		= 0x00001002;
-	BRIDGEREGL(0x5C)		= 0x00000011;
-
-	/* we also need to set up the PCI-PCI bridge */
-	bus.number = 0;
-
-	/* IO: 0x00000000-0x00020000 */
-	o->read (&bus, PCI_DEVFN(3, 0), PCI_COMMAND,		2, &x);
-	x |= PCI_COMMAND_MASTER |
-		PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-		PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
-	o->write(&bus, PCI_DEVFN(3, 0), PCI_COMMAND,		2, x);
-
-	o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE,		1, &x);
-	o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16,	4, &x);
-	o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE,	4, &x);
-	o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE,	4, &x);
-
-	o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE,		1, 0x01);
-	o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE,		1, &x);
-	o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16,	4, 0x00020000);
-	o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16,	4, &x);
-	o->write(&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE,	4, 0xEBB0EA00);
-	o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE,	4, &x);
-	o->write(&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE,	4, 0xE9F0E800);
-	o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE,	4, &x);
-
-	unit_disable_pcnet(&bus, o);
-}