summaryrefslogtreecommitdiff
path: root/arch/powerpc/include
diff options
context:
space:
mode:
authorAnatolij Gustschin <agust@denx.de>2013-02-04 11:16:02 +0100
committerAnatolij Gustschin <agust@denx.de>2013-02-04 23:29:26 +0000
commitedfcf33cabf29710f12a3bba4a7b3761a918e268 (patch)
treeb9f679459510a074153e0ab63dbceb02f7860eb7 /arch/powerpc/include
parentb2639b5f1d01f218dc95537a1c352b3a551c4dd5 (diff)
powerpc/512x: add function for chip select parameter configuration
Add ability to configure chip select (CS) parameters for devices that need different CS parameters setup after their configuration. I.e. an FPGA device on LP bus can require different CS parameters for its bus interface after loading firmware into it. A driver can easily reconfigure the LPC CS parameters using this function. Acked-by: Timur Tabi <timur@tabi.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
Diffstat (limited to 'arch/powerpc/include')
-rw-r--r--arch/powerpc/include/asm/mpc5121.h16
1 files changed, 16 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
index 8c0ab2ca689c..8ae133eaf9fa 100644
--- a/arch/powerpc/include/asm/mpc5121.h
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -53,4 +53,20 @@ struct mpc512x_ccm {
u32 m4ccr; /* MSCAN4 CCR */
u8 res[0x98]; /* Reserved */
};
+
+/*
+ * LPC Module
+ */
+struct mpc512x_lpc {
+ u32 cs_cfg[8]; /* CS config */
+ u32 cs_ctrl; /* CS Control Register */
+ u32 cs_status; /* CS Status Register */
+ u32 burst_ctrl; /* CS Burst Control Register */
+ u32 deadcycle_ctrl; /* CS Deadcycle Control Register */
+ u32 holdcycle_ctrl; /* CS Holdcycle Control Register */
+ u32 alt; /* Address Latch Timing Register */
+};
+
+int mpc512x_cs_config(unsigned int cs, u32 val);
+
#endif /* __ASM_POWERPC_MPC5121_H__ */