powerpc/64s: power4 nap fixup in C

There is no need for this to be in asm, use the new intrrupt entry wrapper.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210406025508.821718-1-npiggin@gmail.com

1 files changed, 0 insertions, 45 deletions

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 8082b690e874..0cdb59e8b577 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -693,25 +693,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 .endm
 
 /*
- * When the idle code in power4_idle puts the CPU into NAP mode,
- * it has to do so in a loop, and relies on the external interrupt
- * and decrementer interrupt entry code to get it out of the loop.
- * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
- * to signal that it is in the loop and needs help to get out.
- */
-#ifdef CONFIG_PPC_970_NAP
-#define FINISH_NAP				\
-BEGIN_FTR_SECTION				\
-	ld	r11, PACA_THREAD_INFO(r13);	\
-	ld	r9,TI_LOCAL_FLAGS(r11);		\
-	andi.	r10,r9,_TLF_NAPPING;		\
-	bnel	power4_fixup_nap;		\
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-#else
-#define FINISH_NAP
-#endif
-
-/*
  * There are a few constraints to be concerned with.
  * - Real mode exceptions code/data must be located at their physical location.
  * - Virtual mode exceptions must be mapped at their 0xc000... location.
@@ -1248,7 +1229,6 @@ EXC_COMMON_BEGIN(machine_check_common)
 	 */
 	GEN_COMMON machine_check
 
-	FINISH_NAP
 	/* Enable MSR_RI when finished with PACA_EXMC */
 	li	r10,MSR_RI
 	mtmsrd 	r10,1
@@ -1571,7 +1551,6 @@ EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100)
 EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
 EXC_COMMON_BEGIN(hardware_interrupt_common)
 	GEN_COMMON hardware_interrupt
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_IRQ
 	b	interrupt_return
@@ -1801,7 +1780,6 @@ EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80)
 EXC_VIRT_END(decrementer, 0x4900, 0x80)
 EXC_COMMON_BEGIN(decrementer_common)
 	GEN_COMMON decrementer
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	timer_interrupt
 	b	interrupt_return
@@ -1886,7 +1864,6 @@ EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100)
 EXC_VIRT_END(doorbell_super, 0x4a00, 0x100)
 EXC_COMMON_BEGIN(doorbell_super_common)
 	GEN_COMMON doorbell_super
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_DOORBELL
 	bl	doorbell_exception
@@ -2237,7 +2214,6 @@ EXC_COMMON_BEGIN(hmi_exception_early_common)
 
 EXC_COMMON_BEGIN(hmi_exception_common)
 	GEN_COMMON hmi_exception
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	handle_hmi_exception
 	b	interrupt_return
@@ -2266,7 +2242,6 @@ EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20)
 EXC_VIRT_END(h_doorbell, 0x4e80, 0x20)
 EXC_COMMON_BEGIN(h_doorbell_common)
 	GEN_COMMON h_doorbell
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_DOORBELL
 	bl	doorbell_exception
@@ -2299,7 +2274,6 @@ EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20)
 EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20)
 EXC_COMMON_BEGIN(h_virt_irq_common)
 	GEN_COMMON h_virt_irq
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_IRQ
 	b	interrupt_return
@@ -2345,7 +2319,6 @@ EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20)
 EXC_VIRT_END(performance_monitor, 0x4f00, 0x20)
 EXC_COMMON_BEGIN(performance_monitor_common)
 	GEN_COMMON performance_monitor
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	performance_monitor_exception
 	b	interrupt_return
@@ -3096,24 +3069,6 @@ USE_FIXED_SECTION(virt_trampolines)
 __end_interrupts:
 DEFINE_FIXED_SYMBOL(__end_interrupts)
 
-#ifdef CONFIG_PPC_970_NAP
-	/*
-	 * Called by exception entry code if _TLF_NAPPING was set, this clears
-	 * the NAPPING flag, and redirects the exception exit to
-	 * power4_fixup_nap_return.
-	 */
-	.globl power4_fixup_nap
-EXC_COMMON_BEGIN(power4_fixup_nap)
-	andc	r9,r9,r10
-	std	r9,TI_LOCAL_FLAGS(r11)
-	LOAD_REG_ADDR(r10, power4_idle_nap_return)
-	std	r10,_NIP(r1)
-	blr
-
-power4_idle_nap_return:
-	blr
-#endif
-
 CLOSE_FIXED_SECTION(real_vectors);
 CLOSE_FIXED_SECTION(real_trampolines);
 CLOSE_FIXED_SECTION(virt_vectors);