Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "Here is the bulk of the powerpc changes for this merge window.  It got
  a bit delayed in part because I wasn't paying attention, and in part
  because I discovered I had a core PCI change without a PCI maintainer
  ack in it.  Bjorn eventually agreed it was ok to merge it though we'll
  probably improve it later and I didn't want to rebase to add his ack.

  There is going to be a bit more next week, essentially fixes that I
  still want to sort through and test.

  The biggest item this time is the support to build the ppc64 LE kernel
  with our new v2 ABI.  We previously supported v2 userspace but the
  kernel itself was a tougher nut to crack.  This is now sorted mostly
  thanks to Anton and Rusty.

  We also have a fairly big series from Cedric that add support for
  64-bit LE zImage boot wrapper.  This was made harder by the fact that
  traditionally our zImage wrapper was always 32-bit, but our new LE
  toolchains don't really support 32-bit anymore (it's somewhat there
  but not really "supported") so we didn't want to rely on it.  This
  meant more churn that just endian fixes.

  This brings some more LE bits as well, such as the ability to run in
  LE mode without a hypervisor (ie. under OPAL firmware) by doing the
  right OPAL call to reinitialize the CPU to take HV interrupts in the
  right mode and the usual pile of endian fixes.

  There's another series from Gavin adding EEH improvements (one day we
  *will* have a release with less than 20 EEH patches, I promise!).

  Another highlight is the support for the "Split core" functionality on
  P8 by Michael.  This allows a P8 core to be split into "sub cores" of
  4 threads which allows the subcores to run different guests under KVM
  (the HW still doesn't support a partition per thread).

  And then the usual misc bits and fixes ..."

[ Further delayed by gmail deciding that BenH is a dirty spammer.
  Google knows.  ]

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
  powerpc/powernv: Add missing include to LPC code
  selftests/powerpc: Test the THP bug we fixed in the previous commit
  powerpc/mm: Check paca psize is up to date for huge mappings
  powerpc/powernv: Pass buffer size to OPAL validate flash call
  powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
  powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
  powerpc/powernv: Set memory_block_size_bytes to 256MB
  powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
  powerpc/powernv: Fix endian issues in memory error handling code
  powerpc/eeh: Skip eeh sysfs when eeh is disabled
  powerpc: 64bit sendfile is capped at 2GB
  powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
  powerpc/serial: Use saner flags when creating legacy ports
  powerpc: Add cpu family documentation
  powerpc/xmon: Fix up xmon format strings
  powerpc/powernv: Add calls to support little endian host
  powerpc: Document sysfs DSCR interface
  powerpc: Fix regression of per-CPU DSCR setting
  powerpc: Split __SYSFS_SPRSETUP macro
  arch: powerpc/fadump: Cleaning up inconsistent NULL checks
  ...

1 files changed, 59 insertions, 58 deletions

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b7363bd42452..a95145d7f61b 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -70,16 +70,15 @@ _GLOBAL(__start)
 	/* NOP this out unconditionally */
 BEGIN_FTR_SECTION
 	FIXUP_ENDIAN
-	b	.__start_initialization_multiplatform
+	b	__start_initialization_multiplatform
 END_FTR_SECTION(0, 1)
 
 	/* Catch branch to 0 in real mode */
 	trap
 
-	/* Secondary processors spin on this value until it becomes nonzero.
-	 * When it does it contains the real address of the descriptor
-	 * of the function that the cpu should jump to to continue
-	 * initialization.
+	/* Secondary processors spin on this value until it becomes non-zero.
+	 * When non-zero, it contains the real address of the function the cpu
+	 * should jump to.
 	 */
 	.balign 8
 	.globl  __secondary_hold_spinloop
@@ -140,16 +139,15 @@ __secondary_hold:
 	tovirt(r26,r26)
 #endif
 	/* All secondary cpus wait here until told to start. */
-100:	ld	r4,__secondary_hold_spinloop-_stext(r26)
-	cmpdi	0,r4,0
+100:	ld	r12,__secondary_hold_spinloop-_stext(r26)
+	cmpdi	0,r12,0
 	beq	100b
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
 #ifdef CONFIG_PPC_BOOK3E
-	tovirt(r4,r4)
+	tovirt(r12,r12)
 #endif
-	ld	r4,0(r4)		/* deref function descriptor */
-	mtctr	r4
+	mtctr	r12
 	mr	r3,r24
 	/*
 	 * it may be the case that other platforms have r4 right to
@@ -186,16 +184,16 @@ _GLOBAL(generic_secondary_thread_init)
 	mr	r24,r3
 
 	/* turn on 64-bit mode */
-	bl	.enable_64b_mode
+	bl	enable_64b_mode
 
 	/* get a valid TOC pointer, wherever we're mapped at */
-	bl	.relative_toc
+	bl	relative_toc
 	tovirt(r2,r2)
 
 #ifdef CONFIG_PPC_BOOK3E
 	/* Book3E initialization */
 	mr	r3,r24
-	bl	.book3e_secondary_thread_init
+	bl	book3e_secondary_thread_init
 #endif
 	b	generic_secondary_common_init
 
@@ -214,17 +212,17 @@ _GLOBAL(generic_secondary_smp_init)
 	mr	r25,r4
 
 	/* turn on 64-bit mode */
-	bl	.enable_64b_mode
+	bl	enable_64b_mode
 
 	/* get a valid TOC pointer, wherever we're mapped at */
-	bl	.relative_toc
+	bl	relative_toc
 	tovirt(r2,r2)
 
 #ifdef CONFIG_PPC_BOOK3E
 	/* Book3E initialization */
 	mr	r3,r24
 	mr	r4,r25
-	bl	.book3e_secondary_core_init
+	bl	book3e_secondary_core_init
 #endif
 
 generic_secondary_common_init:
@@ -236,7 +234,7 @@ generic_secondary_common_init:
 	ld	r13,0(r13)		/* Get base vaddr of paca array	 */
 #ifndef CONFIG_SMP
 	addi	r13,r13,PACA_SIZE	/* know r13 if used accidentally */
-	b	.kexec_wait		/* wait for next kernel if !SMP	 */
+	b	kexec_wait		/* wait for next kernel if !SMP	 */
 #else
 	LOAD_REG_ADDR(r7, nr_cpu_ids)	/* Load nr_cpu_ids address       */
 	lwz	r7,0(r7)		/* also the max paca allocated 	 */
@@ -250,7 +248,7 @@ generic_secondary_common_init:
 	blt	1b
 
 	mr	r3,r24			/* not found, copy phys to r3	 */
-	b	.kexec_wait		/* next kernel might do better	 */
+	b	kexec_wait		/* next kernel might do better	 */
 
 2:	SET_PACA(r13)
 #ifdef CONFIG_PPC_BOOK3E
@@ -264,11 +262,13 @@ generic_secondary_common_init:
 	/* See if we need to call a cpu state restore handler */
 	LOAD_REG_ADDR(r23, cur_cpu_spec)
 	ld	r23,0(r23)
-	ld	r23,CPU_SPEC_RESTORE(r23)
-	cmpdi	0,r23,0
+	ld	r12,CPU_SPEC_RESTORE(r23)
+	cmpdi	0,r12,0
 	beq	3f
-	ld	r23,0(r23)
-	mtctr	r23
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
+	ld	r12,0(r12)
+#endif
+	mtctr	r12
 	bctrl
 
 3:	LOAD_REG_ADDR(r3, spinning_secondaries) /* Decrement spinning_secondaries */
@@ -299,7 +299,7 @@ generic_secondary_common_init:
  * Assumes we're mapped EA == RA if the MMU is on.
  */
 #ifdef CONFIG_PPC_BOOK3S
-_STATIC(__mmu_off)
+__mmu_off:
 	mfmsr	r3
 	andi.	r0,r3,MSR_IR|MSR_DR
 	beqlr
@@ -324,12 +324,12 @@ _STATIC(__mmu_off)
  *                 DT block, r4 is a physical pointer to the kernel itself
  *
  */
-_GLOBAL(__start_initialization_multiplatform)
+__start_initialization_multiplatform:
 	/* Make sure we are running in 64 bits mode */
-	bl	.enable_64b_mode
+	bl	enable_64b_mode
 
 	/* Get TOC pointer (current runtime address) */
-	bl	.relative_toc
+	bl	relative_toc
 
 	/* find out where we are now */
 	bcl	20,31,$+4
@@ -342,7 +342,7 @@ _GLOBAL(__start_initialization_multiplatform)
 	 */
 	cmpldi	cr0,r5,0
 	beq	1f
-	b	.__boot_from_prom		/* yes -> prom */
+	b	__boot_from_prom		/* yes -> prom */
 1:
 	/* Save parameters */
 	mr	r31,r3
@@ -354,8 +354,8 @@ _GLOBAL(__start_initialization_multiplatform)
 #endif
 
 #ifdef CONFIG_PPC_BOOK3E
-	bl	.start_initialization_book3e
-	b	.__after_prom_start
+	bl	start_initialization_book3e
+	b	__after_prom_start
 #else
 	/* Setup some critical 970 SPRs before switching MMU off */
 	mfspr	r0,SPRN_PVR
@@ -368,15 +368,15 @@ _GLOBAL(__start_initialization_multiplatform)
 	beq	1f
 	cmpwi	r0,0x45		/* 970GX */
 	bne	2f
-1:	bl	.__cpu_preinit_ppc970
+1:	bl	__cpu_preinit_ppc970
 2:
 
 	/* Switch off MMU if not already off */
-	bl	.__mmu_off
-	b	.__after_prom_start
+	bl	__mmu_off
+	b	__after_prom_start
 #endif /* CONFIG_PPC_BOOK3E */
 
-_INIT_STATIC(__boot_from_prom)
+__boot_from_prom:
 #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
 	/* Save parameters */
 	mr	r31,r3
@@ -395,7 +395,7 @@ _INIT_STATIC(__boot_from_prom)
 #ifdef CONFIG_RELOCATABLE
 	/* Relocate code for where we are now */
 	mr	r3,r26
-	bl	.relocate
+	bl	relocate
 #endif
 
 	/* Restore parameters */
@@ -407,14 +407,14 @@ _INIT_STATIC(__boot_from_prom)
 
 	/* Do all of the interaction with OF client interface */
 	mr	r8,r26
-	bl	.prom_init
+	bl	prom_init
 #endif /* #CONFIG_PPC_OF_BOOT_TRAMPOLINE */
 
 	/* We never return. We also hit that trap if trying to boot
 	 * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
 	trap
 
-_STATIC(__after_prom_start)
+__after_prom_start:
 #ifdef CONFIG_RELOCATABLE
 	/* process relocations for the final address of the kernel */
 	lis	r25,PAGE_OFFSET@highest	/* compute virtual base of kernel */
@@ -424,7 +424,7 @@ _STATIC(__after_prom_start)
 	bne	1f
 	add	r25,r25,r26
 1:	mr	r3,r25
-	bl	.relocate
+	bl	relocate
 #endif
 
 /*
@@ -464,12 +464,12 @@ _STATIC(__after_prom_start)
 	lis	r5,(copy_to_here - _stext)@ha
 	addi	r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
 
-	bl	.copy_and_flush		/* copy the first n bytes	 */
+	bl	copy_and_flush		/* copy the first n bytes	 */
 					/* this includes the code being	 */
 					/* executed here.		 */
 	addis	r8,r3,(4f - _stext)@ha	/* Jump to the copy of this code */
-	addi	r8,r8,(4f - _stext)@l	/* that we just made */
-	mtctr	r8
+	addi	r12,r8,(4f - _stext)@l	/* that we just made */
+	mtctr	r12
 	bctr
 
 .balign 8
@@ -478,9 +478,9 @@ p_end:	.llong	_end - _stext
 4:	/* Now copy the rest of the kernel up to _end */
 	addis	r5,r26,(p_end - _stext)@ha
 	ld	r5,(p_end - _stext)@l(r5)	/* get _end */
-5:	bl	.copy_and_flush		/* copy the rest */
+5:	bl	copy_and_flush		/* copy the rest */
 
-9:	b	.start_here_multiplatform
+9:	b	start_here_multiplatform
 
 /*
  * Copy routine used to copy the kernel to start at physical address 0
@@ -544,7 +544,7 @@ __secondary_start_pmac_0:
 	
 _GLOBAL(pmac_secondary_start)
 	/* turn on 64-bit mode */
-	bl	.enable_64b_mode
+	bl	enable_64b_mode
 
 	li	r0,0
 	mfspr	r3,SPRN_HID4
@@ -556,11 +556,11 @@ _GLOBAL(pmac_secondary_start)
 	slbia
 
 	/* get TOC pointer (real address) */
-	bl	.relative_toc
+	bl	relative_toc
 	tovirt(r2,r2)
 
 	/* Copy some CPU settings from CPU 0 */
-	bl	.__restore_cpu_ppc970
+	bl	__restore_cpu_ppc970
 
 	/* pSeries do that early though I don't think we really need it */
 	mfmsr	r3
@@ -619,7 +619,7 @@ __secondary_start:
 	std	r14,PACAKSAVE(r13)
 
 	/* Do early setup for that CPU (stab, slb, hash table pointer) */
-	bl	.early_setup_secondary
+	bl	early_setup_secondary
 
 	/*
 	 * setup the new stack pointer, but *don't* use this until
@@ -639,7 +639,7 @@ __secondary_start:
 	stb	r0,PACAIRQHAPPENED(r13)
 
 	/* enable MMU and jump to start_secondary */
-	LOAD_REG_ADDR(r3, .start_secondary_prolog)
+	LOAD_REG_ADDR(r3, start_secondary_prolog)
 	LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
 
 	mtspr	SPRN_SRR0,r3
@@ -652,11 +652,11 @@ __secondary_start:
  * zero the stack back-chain pointer and get the TOC virtual address
  * before going into C code.
  */
-_GLOBAL(start_secondary_prolog)
+start_secondary_prolog:
 	ld	r2,PACATOC(r13)
 	li	r3,0
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
-	bl	.start_secondary
+	bl	start_secondary
 	b	.
 /*
  * Reset stack pointer and call start_secondary
@@ -667,14 +667,14 @@ _GLOBAL(start_secondary_resume)
 	ld	r1,PACAKSAVE(r13)	/* Reload kernel stack pointer */
 	li	r3,0
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
-	bl	.start_secondary
+	bl	start_secondary
 	b	.
 #endif
 
 /*
  * This subroutine clobbers r11 and r12
  */
-_GLOBAL(enable_64b_mode)
+enable_64b_mode:
 	mfmsr	r11			/* grab the current MSR */
 #ifdef CONFIG_PPC_BOOK3E
 	oris	r11,r11,0x8000		/* CM bit set, we'll set ICM later */
@@ -715,9 +715,9 @@ p_toc:	.llong	__toc_start + 0x8000 - 0b
 /*
  * This is where the main kernel code starts.
  */
-_INIT_STATIC(start_here_multiplatform)
+start_here_multiplatform:
 	/* set up the TOC */
-	bl      .relative_toc
+	bl      relative_toc
 	tovirt(r2,r2)
 
 	/* Clear out the BSS. It may have been done in prom_init,
@@ -776,9 +776,9 @@ _INIT_STATIC(start_here_multiplatform)
 
 	/* Restore parameters passed from prom_init/kexec */
 	mr	r3,r31
-	bl	.early_setup		/* also sets r13 and SPRG_PACA */
+	bl	early_setup		/* also sets r13 and SPRG_PACA */
 
-	LOAD_REG_ADDR(r3, .start_here_common)
+	LOAD_REG_ADDR(r3, start_here_common)
 	ld	r4,PACAKMSR(r13)
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
@@ -786,7 +786,8 @@ _INIT_STATIC(start_here_multiplatform)
 	b	.	/* prevent speculative execution */
 	
 	/* This is where all platforms converge execution */
-_INIT_GLOBAL(start_here_common)
+
+start_here_common:
 	/* relocation is on at this point */
 	std	r1,PACAKSAVE(r13)
 
@@ -794,7 +795,7 @@ _INIT_GLOBAL(start_here_common)
 	ld	r2,PACATOC(r13)
 
 	/* Do more system initializations in virtual mode */
-	bl	.setup_system
+	bl	setup_system
 
 	/* Mark interrupts soft and hard disabled (they might be enabled
 	 * in the PACA when doing hotplug)
@@ -805,7 +806,7 @@ _INIT_GLOBAL(start_here_common)
 	stb	r0,PACAIRQHAPPENED(r13)
 
 	/* Generic kernel entry */
-	bl	.start_kernel
+	bl	start_kernel
 
 	/* Not reached */
 	BUG_OPCODE