Merge changes from Paul Gortmaker

Merge the changes to retire the legacy WR sbc8548 and sbc8641 platforms
from Paul. These were sent as a pull request, but I rebased them onto
rc2 so as not to pull too many unrelated changes in to my next.

Description from Paul's pull request follows:

In v2.6.27 (2008, 917f0af9e5a9) the sbc8260 support was implicitly
retired by not being carried forward through the ppc --> powerpc
device tree transition.

Then, in v3.6 (2012, b048b4e17cbb) we retired the support for the
sbc8560 boards.

Next, in v4.18 (2017, 3bc6cf5a86e5) we retired the support for the
2006 vintage sbc834x boards.

The sbc8548 and sbc8641d boards were maybe 1-2 years newer than the
sbc834x boards, but it is also 3+ years later, so it makes sense to
now retire them as well - which is what is done here.

These two remaining WR boards were based on the Freescale MPC8548-CDS
and the MPC8641D-HPCN reference board implementations.  Having had the
chance to use these and many other Fsl ref boards, I know this:  The
Freescale reference boards were typically produced in limited quantity
and primarily available to BSP developers and hardware designers, and
not likely to have found a 2nd life with hobbyists and/or collectors.

It was good to have that BSP code subjected to mainline review and
hence also widely available back in the day. But given the above, we
should probably also be giving serious consideration to retiring
additional similar age/type reference board platforms as well.

I've always felt it is important for us to be proactive in retiring
old code, since it has a genuine non-zero carrying cost, as described
in the 930d52c012b8 merge log.  But for the here and now, we just
clean up the remaining BSP code that I had added for SBC platforms.

Link: https://lore.kernel.org/r/20210824174209.GB160508@windriver.com

6 files changed, 1 insertions, 236 deletions

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index b77cbb0a50e1..4142ebf01382 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -208,12 +208,6 @@ config TQM8560
 	select TQM85xx
 	select CPM2
 
-config SBC8548
-	bool "Wind River SBC8548"
-	select DEFAULT_UIMAGE
-	help
-	  This option enables support for the Wind River SBC8548 board
-
 config PPA8548
 	bool "Prodrive PPA8548"
 	help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index d1dd0dca5ebf..60e4e97a929d 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
 obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
-obj-$(CONFIG_SBC8548)     += sbc8548.o
 obj-$(CONFIG_PPA8548)     += ppa8548.o
 obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
deleted file mode 100644
index e4acf5ce6b07..000000000000
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Wind River SBC8548 setup and early boot code.
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the MPC8548CDS support - Copyright 2005 Freescale Inc.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/initrd.h>
-#include <linux/interrupt.h>
-#include <linux/fsl_devices.h>
-#include <linux/of_platform.h>
-#include <linux/pgtable.h>
-
-#include <asm/page.h>
-#include <linux/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ipic.h>
-#include <asm/pci-bridge.h>
-#include <asm/irq.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc85xx.h"
-
-static int sbc_rev;
-
-static void __init sbc8548_pic_init(void)
-{
-	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
-			0, 256, " OpenPIC  ");
-	BUG_ON(mpic == NULL);
-	mpic_init(mpic);
-}
-
-/* Extract the HW Rev from the EPLD on the board */
-static int __init sbc8548_hw_rev(void)
-{
-	struct device_node *np;
-	struct resource res;
-	unsigned int *rev;
-	int board_rev = 0;
-
-	np = of_find_compatible_node(NULL, NULL, "hw-rev");
-	if (np == NULL) {
-		printk("No HW-REV found in DTB.\n");
-		return -ENODEV;
-	}
-
-	of_address_to_resource(np, 0, &res);
-	of_node_put(np);
-
-	rev = ioremap(res.start,sizeof(unsigned int));
-	board_rev = (*rev) >> 28;
-	iounmap(rev);
-
-	return board_rev;
-}
-
-/*
- * Setup the architecture
- */
-static void __init sbc8548_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("sbc8548_setup_arch()", 0);
-
-	fsl_pci_assign_primary();
-
-	sbc_rev = sbc8548_hw_rev();
-}
-
-static void sbc8548_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Wind River\n");
-	seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-}
-
-machine_arch_initcall(sbc8548, mpc85xx_common_publish_devices);
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8548_probe(void)
-{
-	return of_machine_is_compatible("SBC8548");
-}
-
-define_machine(sbc8548) {
-	.name		= "SBC8548",
-	.probe		= sbc8548_probe,
-	.setup_arch	= sbc8548_setup_arch,
-	.init_IRQ	= sbc8548_pic_init,
-	.show_cpuinfo	= sbc8548_show_cpuinfo,
-	.get_irq	= mpic_get_irq,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
-#endif
-	.calibrate_decr = generic_calibrate_decr,
-	.progress	= udbg_progress,
-};
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 07a9d60c618a..be867abebc83 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -20,12 +20,6 @@ config MPC8641_HPCN
 	help
 	  This option enables support for the MPC8641 HPCN board.
 
-config SBC8641D
-	bool "Wind River SBC8641D"
-	select DEFAULT_UIMAGE
-	help
-	  This option enables support for the WRS SBC8641D board.
-
 config MPC8610_HPCD
 	bool "Freescale MPC8610 HPCD"
 	select DEFAULT_UIMAGE
@@ -74,7 +68,7 @@ config MPC8641
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
-	default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A \
+	default y if MPC8641_HPCN || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A \
 			|| MVME7100
 
 config MPC8610
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 2c04449be107..5bbe1475bf26 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -6,7 +6,6 @@
 obj-y				:= pic.o common.o
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
-obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
 obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
 obj-$(CONFIG_GEF_SBC610)	+= gef_sbc610.o
 obj-$(CONFIG_GEF_SBC310)	+= gef_sbc310.o
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
deleted file mode 100644
index dc23dd383d6e..000000000000
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SBC8641D board specific routines
- *
- * Copyright 2008 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the 8641 HPCN support by Freescale Semiconductor Inc.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <mm/mmu_decl.h>
-#include <asm/udbg.h>
-
-#include <asm/mpic.h>
-
-#include <sysdev/fsl_pci.h>
-#include <sysdev/fsl_soc.h>
-
-#include "mpc86xx.h"
-
-static void __init
-sbc8641_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("sbc8641_setup_arch()", 0);
-
-	printk("SBC8641 board from Wind River\n");
-
-#ifdef CONFIG_SMP
-	mpc86xx_smp_init();
-#endif
-
-	fsl_pci_assign_primary();
-}
-
-
-static void
-sbc8641_show_cpuinfo(struct seq_file *m)
-{
-	uint svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Wind River Systems\n");
-
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-}
-
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8641_probe(void)
-{
-	if (of_machine_is_compatible("wind,sbc8641"))
-		return 1;	/* Looks good */
-
-	return 0;
-}
-
-machine_arch_initcall(sbc8641, mpc86xx_common_publish_devices);
-
-define_machine(sbc8641) {
-	.name			= "SBC8641D",
-	.probe			= sbc8641_probe,
-	.setup_arch		= sbc8641_setup_arch,
-	.init_IRQ		= mpc86xx_init_irq,
-	.show_cpuinfo		= sbc8641_show_cpuinfo,
-	.get_irq		= mpic_get_irq,
-	.time_init		= mpc86xx_time_init,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-};