Merge tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux

Pull sh updates from John Paul Adrian Glaubitz:
 "While the previously announced patch series for converting arch/sh to
  device trees is not yet ready for inclusion to mainline and therefore
  didn't make it for this pull request, there are still a small number
  changes for v6.7 which include one platform (board plus CPU and driver
  code) removal plus two fixes.

  The removal sent in by Arnd Bergmann concerns the microdev board which
  was an early SuperH prototype board that was never used in production.
  With the board removed, we were able to drop the now unused code for
  the SH4-202 CPU and well as the driver code for the superhyway bus and
  a custom implementation for ioport_map() and ioport_unmap() which will
  allow us to simplify ioport handling in the future.

  Another patch set by Geert Uytterhoeven revives SuperH BIOS
  earlyprintk support which got accidentally disabled in
  e76fe57447e88916 ("sh: Remove old early serial console code V2"), the
  second patch in the series updates the documentation.

  Finally, a patch by Masami Hiramatsu fixes a regression reported by
  the kernel test robot which uncovered that arch/sh is not implementing
  arch_cmpxchg_local() and therefore needs use __generic_cmpxchg_local()
  instead"

* tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local()
  Documentation: kernel-parameters: Add earlyprintk=bios on SH
  sh: bios: Revive earlyprintk support
  sh: machvec: Remove custom ioport_{un,}map()
  sh: Remove superhyway bus support
  sh: Remove unused SH4-202 support
  sh: Remove stale microdev board

21 files changed, 24 insertions, 1275 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 33530b044953..7500521b2b98 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -124,8 +124,7 @@ config ARCH_HAS_ILOG2_U64
 
 config NO_IOPORT_MAP
 	def_bool !PCI
-	depends on !SH_SH4202_MICRODEV && !SH_SHMIN && !SH_HP6XX && \
-		   !SH_SOLUTION_ENGINE
+	depends on !SH_SHMIN && !SH_HP6XX && !SH_SOLUTION_ENGINE
 
 config IO_TRAPPED
 	bool
@@ -384,10 +383,6 @@ config CPU_SUBTYPE_SH7760
 	bool "Support SH7760 processor"
 	select CPU_SH4
 
-config CPU_SUBTYPE_SH4_202
-	bool "Support SH4-202 processor"
-	select CPU_SH4
-
 # SH-4A Processor Support
 
 config CPU_SUBTYPE_SH7723
@@ -518,7 +513,6 @@ config SH_PCLK_FREQ
 			      CPU_SUBTYPE_SH7263 || \
 			      CPU_SUBTYPE_MXG
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
-	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
 	help
 	  This option is used to specify the peripheral clock frequency.
@@ -743,10 +737,6 @@ endmenu
 
 menu "Bus options"
 
-config SUPERHYWAY
-	tristate "SuperHyway Bus support"
-	depends on CPU_SUBTYPE_SH4_202
-
 config MAPLE
 	bool "Maple Bus support"
 	depends on SH_DREAMCAST
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index c449e7c1b20f..8bcd6c1431a9 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -22,6 +22,17 @@ config STACK_DEBUG
 	  every function call and will therefore incur a major
 	  performance hit. Most users should say N.
 
+config EARLY_PRINTK
+	bool "Early printk"
+	depends on SH_STANDARD_BIOS
+	help
+	  Say Y here to redirect kernel printk messages to the serial port
+	  used by the SH-IPL bootloader, starting very early in the boot
+	  process and ending when the kernel's serial console is initialised.
+	  This option is only useful while porting the kernel to a new machine,
+	  when the kernel may crash or hang before the serial console is
+	  initialised.  If unsure, say N.
+
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index fafe15d3ba1d..109bec4dad94 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -289,13 +289,6 @@ config SH_EDOSK7760
 	  Select if configuring for a Renesas EDOSK7760
 	  evaluation board.
 
-config SH_SH4202_MICRODEV
-	bool "SH4-202 MicroDev"
-	depends on CPU_SUBTYPE_SH4_202
-	help
-	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-	  with an SH4-202 CPU.
-
 config SH_LANDISK
 	bool "LANDISK"
 	depends on CPU_SUBTYPE_SH7751R
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index b57219436ace..fbbc350ca854 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_SH_SDK7780)	+= mach-sdk7780/
 obj-$(CONFIG_SH_SDK7786)	+= mach-sdk7786/
 obj-$(CONFIG_SH_X3PROTO)	+= mach-x3proto/
 obj-$(CONFIG_SH_SH7763RDP)	+= mach-sh7763rdp/
-obj-$(CONFIG_SH_SH4202_MICRODEV)+= mach-microdev/
 obj-$(CONFIG_SH_LANDISK)	+= mach-landisk/
 obj-$(CONFIG_SH_LBOX_RE2)	+= mach-lboxre2/
 obj-$(CONFIG_SH_RSK)		+= mach-rsk/
diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
deleted file mode 100644
index 05c5698dcad0..000000000000
--- a/arch/sh/boards/mach-microdev/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperH MicroDev specific parts of the kernel
-#
-
-obj-y	 := setup.o irq.o io.o fdc37c93xapm.o
diff --git a/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/arch/sh/boards/mach-microdev/fdc37c93xapm.c
deleted file mode 100644
index 2a04f72dd145..000000000000
--- a/arch/sh/boards/mach-microdev/fdc37c93xapm.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Setup for the SMSC FDC37C93xAPM
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <mach/microdev.h>
-
-#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
-#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY	 0x55
-#define SMSC_EXIT_CONFIG_KEY	 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX	 0x07	/* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
-#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
-#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
-#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	outb((val),   SMSC_DATA_PORT_ADDR); })
-
-#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
-#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
-#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
-#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE	0x03f8
-#define SERIAL2_PRIMARY_BASE	0x02f8
-
-#define	MSB(x)		( (x) >> 8 )
-#define	LSB(x)		( (x) & 0xff )
-
-	/* General-Purpose base address on CPU-board FPGA */
-#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul
-
-static int __init smsc_superio_setup(void)
-{
-
-	unsigned char devid, devrev;
-
-		/* Initially the chip is in run state */
-		/* Put it into configuration state */
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-		/* Read device ID info */
-	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
-	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-
-	if ((devid == 0x30) && (devrev == 0x01))
-		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
-	else
-		return -ENODEV;
-
-		/* Select the keyboard device */
-	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
-		/* Select the Serial #1 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the Serial #2 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#1 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#2 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the configuration registers */
-	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
-		/* enable the appropriate GPIO pins for IDE functionality:
-		 * bit[0]   In/Out		1==input;  0==output
-		 * bit[1]   Polarity		1==invert; 0==no invert
-		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
-		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
-		 */
-	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
-	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
-	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
-	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
-	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
-
-		/* Exit the configuration state */
-	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	return 0;
-}
-device_initcall(smsc_superio_setup);
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
deleted file mode 100644
index a76c12721e63..000000000000
--- a/arch/sh/boards/mach-microdev/io.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/sh/boards/superh/microdev/io.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
-	/*
-	 *	we need to have a 'safe' address to re-direct all I/O requests
-	 *	that we do not explicitly wish to handle. This safe address
-	 *	must have the following properies:
-	 *
-	 *		* writes are ignored (no exception)
-	 *		* reads are benign (no side-effects)
-	 *		* accesses of width 1, 2 and 4-bytes are all valid.
-	 *
-	 *	The Processor Version Register (PVR) has these properties.
-	 */
-#define	PVR	0xff000030	/* Processor Version Register */
-
-
-#define	IO_IDE2_BASE		0x170ul	/* I/O base for SMSC FDC37C93xAPM IDE #2 */
-#define	IO_IDE1_BASE		0x1f0ul	/* I/O base for SMSC FDC37C93xAPM IDE #1 */
-#define IO_ISP1161_BASE		0x290ul /* I/O port for Philips ISP1161x USB chip */
-#define IO_SERIAL2_BASE		0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
-#define	IO_LAN91C111_BASE	0x300ul	/* I/O base for SMSC LAN91C111 Ethernet chip */
-#define	IO_IDE2_MISC		0x376ul	/* I/O misc for SMSC FDC37C93xAPM IDE #2 */
-#define IO_SUPERIO_BASE		0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
-#define	IO_IDE1_MISC		0x3f6ul	/* I/O misc for SMSC FDC37C93xAPM IDE #1 */
-#define IO_SERIAL1_BASE		0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
-
-#define	IO_ISP1161_EXTENT	0x04ul	/* I/O extent for Philips ISP1161x USB chip */
-#define	IO_LAN91C111_EXTENT	0x10ul	/* I/O extent for SMSC LAN91C111 Ethernet chip */
-#define	IO_SUPERIO_EXTENT	0x02ul	/* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
-#define	IO_IDE_EXTENT		0x08ul	/* I/O extent for IDE Task Register set */
-#define IO_SERIAL_EXTENT	0x10ul
-
-#define	IO_LAN91C111_PHYS	0xa7500000ul	/* Physical address of SMSC LAN91C111 Ethernet chip */
-#define	IO_ISP1161_PHYS		0xa7700000ul	/* Physical address of Philips ISP1161x USB chip */
-#define	IO_SUPERIO_PHYS		0xa7800000ul	/* Physical address of SMSC FDC37C93xAPM SuperIO chip */
-
-/*
- * map I/O ports to memory-mapped addresses
- */
-void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
-{
-	unsigned long result;
-
-	if ((offset >= IO_LAN91C111_BASE) &&
-	    (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-			/*
-			 *	SMSC LAN91C111 Ethernet chip
-			 */
-		result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
-	} else if ((offset >= IO_SUPERIO_BASE) &&
-		   (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Configuration Registers
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if (((offset >= IO_IDE1_BASE) &&
-		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE1_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #1
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if (((offset >= IO_IDE2_BASE) &&
-		    (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE2_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #2
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL1_BASE) &&
-		   (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #1
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL2_BASE) &&
-		   (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #2
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_ISP1161_BASE) &&
-		   (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
-			/*
-			 *	Philips USB ISP1161x chip
-			 */
-		result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
-	} else {
-			/*
-			 *	safe default.
-			 */
-		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
-		       __func__, offset);
-		result = PVR;
-	}
-
-	return (void __iomem *)result;
-}
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
deleted file mode 100644
index dc27492c83d7..000000000000
--- a/arch/sh/boards/mach-microdev/irq.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/irq.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * SuperH SH4-202 MicroDev board support.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <mach/microdev.h>
-
-#define NUM_EXTERNAL_IRQS 16	/* IRL0 .. IRL15 */
-
-static const struct {
-	unsigned char fpgaIrq;
-	unsigned char mapped;
-	const char *name;
-} fpgaIrqTable[NUM_EXTERNAL_IRQS] = {
-	{ 0,				0,	"unused"   },		/* IRQ #0	IRL=15	0x200  */
-	{ MICRODEV_FPGA_IRQ_KEYBOARD,	1,	"keyboard" },		/* IRQ #1	IRL=14	0x220  */
-	{ MICRODEV_FPGA_IRQ_SERIAL1,	1,	"Serial #1"},		/* IRQ #2	IRL=13	0x240  */
-	{ MICRODEV_FPGA_IRQ_ETHERNET,	1,	"Ethernet" },		/* IRQ #3	IRL=12	0x260  */
-	{ MICRODEV_FPGA_IRQ_SERIAL2,	0,	"Serial #2"},		/* IRQ #4	IRL=11	0x280  */
-	{ 0,				0,	"unused"   },		/* IRQ #5	IRL=10	0x2a0  */
-	{ 0,				0,	"unused"   },		/* IRQ #6	IRL=9	0x2c0  */
-	{ MICRODEV_FPGA_IRQ_USB_HC,	1,	"USB"	   },		/* IRQ #7	IRL=8	0x2e0  */
-	{ MICRODEV_IRQ_PCI_INTA,	1,	"PCI INTA" },		/* IRQ #8	IRL=7	0x300  */
-	{ MICRODEV_IRQ_PCI_INTB,	1,	"PCI INTB" },		/* IRQ #9	IRL=6	0x320  */
-	{ MICRODEV_IRQ_PCI_INTC,	1,	"PCI INTC" },		/* IRQ #10	IRL=5	0x340  */
-	{ MICRODEV_IRQ_PCI_INTD,	1,	"PCI INTD" },		/* IRQ #11	IRL=4	0x360  */
-	{ MICRODEV_FPGA_IRQ_MOUSE,	1,	"mouse"    },		/* IRQ #12	IRL=3	0x380  */
-	{ MICRODEV_FPGA_IRQ_IDE2,	1,	"IDE #2"   },		/* IRQ #13	IRL=2	0x3a0  */
-	{ MICRODEV_FPGA_IRQ_IDE1,	1,	"IDE #1"   },		/* IRQ #14	IRL=1	0x3c0  */
-	{ 0,				0,	"unused"   },		/* IRQ #15	IRL=0	0x3e0  */
-};
-
-#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1)
-#  error Inconsistancy in defining the IRQ# for Keyboard!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_ETHERNET != 3)
-#  error Inconsistancy in defining the IRQ# for Ethernet!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_USB_HC != 7)
-#  error Inconsistancy in defining the IRQ# for USB!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_MOUSE != 12)
-#  error Inconsistancy in defining the IRQ# for PS/2 Mouse!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE2 != 13)
-#  error Inconsistancy in defining the IRQ# for secondary IDE!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE1 != 14)
-#  error Inconsistancy in defining the IRQ# for primary IDE!
-#endif
-
-static void disable_microdev_irq(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	unsigned int fpgaIrq;
-
-	if (irq >= NUM_EXTERNAL_IRQS)
-		return;
-	if (!fpgaIrqTable[irq].mapped)
-		return;
-
-	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
-
-	/* disable interrupts on the FPGA INTC register */
-	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
-}
-
-static void enable_microdev_irq(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	unsigned long priorityReg, priorities, pri;
-	unsigned int fpgaIrq;
-
-	if (unlikely(irq >= NUM_EXTERNAL_IRQS))
-		return;
-	if (unlikely(!fpgaIrqTable[irq].mapped))
-		return;
-
-	pri = 15 - irq;
-
-	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
-	priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
-
-	/* set priority for the interrupt */
-	priorities = __raw_readl(priorityReg);
-	priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
-	priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
-	__raw_writel(priorities, priorityReg);
-
-	/* enable interrupts on the FPGA INTC register */
-	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
-}
-
-static struct irq_chip microdev_irq_type = {
-	.name = "MicroDev-IRQ",
-	.irq_unmask = enable_microdev_irq,
-	.irq_mask = disable_microdev_irq,
-};
-
-/* This function sets the desired irq handler to be a MicroDev type */
-static void __init make_microdev_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_set_chip_and_handler(irq, &microdev_irq_type, handle_level_irq);
-	disable_microdev_irq(irq_get_irq_data(irq));
-}
-
-extern void __init init_microdev_irq(void)
-{
-	int i;
-
-	/* disable interrupts on the FPGA INTC register */
-	__raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
-
-	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
-		make_microdev_irq(i);
-}
-
-extern void microdev_print_fpga_intc_status(void)
-{
-	volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG;
-	volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG;
-	volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0);
-	volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8);
-	volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16);
-	volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24);
-	volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG;
-	volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG;
-
-	printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n");
-	printk("FPGA_INTENB = 0x%08x\n", *intenb);
-	printk("FPGA_INTDSB = 0x%08x\n", *intdsb);
-	printk("FPGA_INTSRC = 0x%08x\n", *intsrc);
-	printk("FPGA_INTREQ = 0x%08x\n", *intreq);
-	printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
-	printk("-------------------------------------------------------------------------------\n");
-}
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
deleted file mode 100644
index f4a777fe2d01..000000000000
--- a/arch/sh/boards/mach-microdev/setup.c
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/boards/superh/microdev/setup.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <video/s1d13xxxfb.h>
-#include <mach/microdev.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <linux/sizes.h>
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start		= 0x300,
-		.end		= 0x300 + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= MICRODEV_LINUX_IRQ_ETHERNET,
-		.end		= MICRODEV_LINUX_IRQ_ETHERNET,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct s1d13xxxfb_regval s1d13806_initregs[] = {
-	{ S1DREG_MISC,			0x00 },
-	{ S1DREG_COM_DISP_MODE,		0x00 },
-	{ S1DREG_GPIO_CNF0,		0x00 },
-	{ S1DREG_GPIO_CNF1,		0x00 },
-	{ S1DREG_GPIO_CTL0,		0x00 },
-	{ S1DREG_GPIO_CTL1,		0x00 },
-	{ S1DREG_CLK_CNF,		0x02 },
-	{ S1DREG_LCD_CLK_CNF,		0x01 },
-	{ S1DREG_CRT_CLK_CNF,		0x03 },
-	{ S1DREG_MPLUG_CLK_CNF,		0x03 },
-	{ S1DREG_CPU2MEM_WST_SEL,	0x02 },
-	{ S1DREG_SDRAM_REF_RATE,	0x03 },
-	{ S1DREG_SDRAM_TC0,		0x00 },
-	{ S1DREG_SDRAM_TC1,		0x01 },
-	{ S1DREG_MEM_CNF,		0x80 },
-	{ S1DREG_PANEL_TYPE,		0x25 },
-	{ S1DREG_MOD_RATE,		0x00 },
-	{ S1DREG_LCD_DISP_HWIDTH,	0x63 },
-	{ S1DREG_LCD_NDISP_HPER,	0x1e },
-	{ S1DREG_TFT_FPLINE_START,	0x06 },
-	{ S1DREG_TFT_FPLINE_PWIDTH,	0x03 },
-	{ S1DREG_LCD_DISP_VHEIGHT0,	0x57 },
-	{ S1DREG_LCD_DISP_VHEIGHT1,	0x02 },
-	{ S1DREG_LCD_NDISP_VPER,	0x00 },
-	{ S1DREG_TFT_FPFRAME_START,	0x0a },
-	{ S1DREG_TFT_FPFRAME_PWIDTH,	0x81 },
-	{ S1DREG_LCD_DISP_MODE,		0x03 },
-	{ S1DREG_LCD_MISC,		0x00 },
-	{ S1DREG_LCD_DISP_START0,	0x00 },
-	{ S1DREG_LCD_DISP_START1,	0x00 },
-	{ S1DREG_LCD_DISP_START2,	0x00 },
-	{ S1DREG_LCD_MEM_OFF0,		0x90 },
-	{ S1DREG_LCD_MEM_OFF1,		0x01 },
-	{ S1DREG_LCD_PIX_PAN,		0x00 },
-	{ S1DREG_LCD_DISP_FIFO_HTC,	0x00 },
-	{ S1DREG_LCD_DISP_FIFO_LTC,	0x00 },
-	{ S1DREG_CRT_DISP_HWIDTH,	0x63 },
-	{ S1DREG_CRT_NDISP_HPER,	0x1f },
-	{ S1DREG_CRT_HRTC_START,	0x04 },
-	{ S1DREG_CRT_HRTC_PWIDTH,	0x8f },
-	{ S1DREG_CRT_DISP_VHEIGHT0,	0x57 },
-	{ S1DREG_CRT_DISP_VHEIGHT1,	0x02 },
-	{ S1DREG_CRT_NDISP_VPER,	0x1b },
-	{ S1DREG_CRT_VRTC_START,	0x00 },
-	{ S1DREG_CRT_VRTC_PWIDTH,	0x83 },
-	{ S1DREG_TV_OUT_CTL,		0x10 },
-	{ S1DREG_CRT_DISP_MODE,		0x05 },
-	{ S1DREG_CRT_DISP_START0,	0x00 },
-	{ S1DREG_CRT_DISP_START1,	0x00 },
-	{ S1DREG_CRT_DISP_START2,	0x00 },
-	{ S1DREG_CRT_MEM_OFF0,		0x20 },
-	{ S1DREG_CRT_MEM_OFF1,		0x03 },
-	{ S1DREG_CRT_PIX_PAN,		0x00 },
-	{ S1DREG_CRT_DISP_FIFO_HTC,	0x00 },
-	{ S1DREG_CRT_DISP_FIFO_LTC,	0x00 },
-	{ S1DREG_LCD_CUR_CTL,		0x00 },
-	{ S1DREG_LCD_CUR_START,		0x01 },
-	{ S1DREG_LCD_CUR_XPOS0,		0x00 },
-	{ S1DREG_LCD_CUR_XPOS1,		0x00 },
-	{ S1DREG_LCD_CUR_YPOS0,		0x00 },
-	{ S1DREG_LCD_CUR_YPOS1,		0x00 },
-	{ S1DREG_LCD_CUR_BCTL0,		0x00 },
-	{ S1DREG_LCD_CUR_GCTL0,		0x00 },
-	{ S1DREG_LCD_CUR_RCTL0,		0x00 },
-	{ S1DREG_LCD_CUR_BCTL1,		0x1f },
-	{ S1DREG_LCD_CUR_GCTL1,		0x3f },
-	{ S1DREG_LCD_CUR_RCTL1,		0x1f },
-	{ S1DREG_LCD_CUR_FIFO_HTC,	0x00 },
-	{ S1DREG_CRT_CUR_CTL,		0x00 },
-	{ S1DREG_CRT_CUR_START,		0x01 },
-	{ S1DREG_CRT_CUR_XPOS0,		0x00 },
-	{ S1DREG_CRT_CUR_XPOS1,		0x00 },
-	{ S1DREG_CRT_CUR_YPOS0,		0x00 },
-	{ S1DREG_CRT_CUR_YPOS1,		0x00 },
-	{ S1DREG_CRT_CUR_BCTL0,		0x00 },
-	{ S1DREG_CRT_CUR_GCTL0,		0x00 },
-	{ S1DREG_CRT_CUR_RCTL0,		0x00 },
-	{ S1DREG_CRT_CUR_BCTL1,		0x1f },
-	{ S1DREG_CRT_CUR_GCTL1,		0x3f },
-	{ S1DREG_CRT_CUR_RCTL1,		0x1f },
-	{ S1DREG_CRT_CUR_FIFO_HTC,	0x00 },
-	{ S1DREG_BBLT_CTL0,		0x00 },
-	{ S1DREG_BBLT_CTL1,		0x00 },
-	{ S1DREG_BBLT_CC_EXP,		0x00 },
-	{ S1DREG_BBLT_OP,		0x00 },
-	{ S1DREG_BBLT_SRC_START0,	0x00 },
-	{ S1DREG_BBLT_SRC_START1,	0x00 },
-	{ S1DREG_BBLT_SRC_START2,	0x00 },
-	{ S1DREG_BBLT_DST_START0,	0x00 },
-	{ S1DREG_BBLT_DST_START1,	0x00 },
-	{ S1DREG_BBLT_DST_START2,	0x00 },
-	{ S1DREG_BBLT_MEM_OFF0,		0x00 },
-	{ S1DREG_BBLT_MEM_OFF1,		0x00 },
-	{ S1DREG_BBLT_WIDTH0,		0x00 },
-	{ S1DREG_BBLT_WIDTH1,		0x00 },
-	{ S1DREG_BBLT_HEIGHT0,		0x00 },
-	{ S1DREG_BBLT_HEIGHT1,		0x00 },
-	{ S1DREG_BBLT_BGC0,		0x00 },
-	{ S1DREG_BBLT_BGC1,		0x00 },
-	{ S1DREG_BBLT_FGC0,		0x00 },
-	{ S1DREG_BBLT_FGC1,		0x00 },
-	{ S1DREG_LKUP_MODE,		0x00 },
-	{ S1DREG_LKUP_ADDR,		0x00 },
-	{ S1DREG_PS_CNF,		0x10 },
-	{ S1DREG_PS_STATUS,		0x00 },
-	{ S1DREG_CPU2MEM_WDOGT,		0x00 },
-	{ S1DREG_COM_DISP_MODE,		0x02 },
-};
-
-static struct s1d13xxxfb_pdata s1d13806_platform_data = {
-	.initregs	= s1d13806_initregs,
-	.initregssize	= ARRAY_SIZE(s1d13806_initregs),
-};
-
-static struct resource s1d13806_resources[] = {
-	[0] = {
-		.start		= 0x07200000,
-		.end		= 0x07200000 + SZ_2M - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 0x07000000,
-		.end		= 0x07000000 + SZ_2M - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device s1d13806_device = {
-	.name		= "s1d13806fb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s1d13806_resources),
-	.resource	= s1d13806_resources,
-
-	.dev = {
-		.platform_data	= &s1d13806_platform_data,
-	},
-};
-
-static struct platform_device *microdev_devices[] __initdata = {
-	&smc91x_device,
-	&s1d13806_device,
-};
-
-static int __init microdev_devices_setup(void)
-{
-	return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
-}
-device_initcall(microdev_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh4202_microdev __initmv = {
-	.mv_name		= "SH4-202 MicroDev",
-	.mv_ioport_map		= microdev_ioport_map,
-	.mv_init_irq		= init_microdev_irq,
-};
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
deleted file mode 100644
index 39a83d832cac..000000000000
--- a/arch/sh/configs/microdev_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH4_202=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SH4202_MICRODEV=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_HEARTBEAT=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
-CONFIG_SUPERHYWAY=y
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
index 56b0acace6e7..8bd10b904bf9 100644
--- a/arch/sh/drivers/Makefile
+++ b/arch/sh/drivers/Makefile
@@ -6,6 +6,5 @@
 obj-y		+= dma/ platform_early.o
 
 obj-$(CONFIG_PCI)		+= pci/
-obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
 obj-$(CONFIG_PUSH_SWITCH)	+= push-switch.o
 obj-$(CONFIG_HEARTBEAT)		+= heartbeat.o
diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile
deleted file mode 100644
index aa6e3267c055..000000000000
--- a/arch/sh/drivers/superhyway/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the SuperHyway specific kernel interface routines under Linux.
-#
-
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= ops-sh4-202.o
-
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
deleted file mode 100644
index 490142274e3b..000000000000
--- a/arch/sh/drivers/superhyway/ops-sh4-202.c
+++ /dev/null
@@ -1,168 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/drivers/superhyway/ops-sh4-202.c
- *
- * SuperHyway bus support for SH4-202
- *
- * Copyright (C) 2005  Paul Mundt
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/superhyway.h>
-#include <linux/string.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#define PHYS_EMI_CBLOCK		P4SEGADDR(0x1ec00000)
-#define PHYS_EMI_DBLOCK		P4SEGADDR(0x08000000)
-#define PHYS_FEMI_CBLOCK	P4SEGADDR(0x1f800000)
-#define PHYS_FEMI_DBLOCK	P4SEGADDR(0x00000000)
-
-#define PHYS_EPBR_BLOCK		P4SEGADDR(0x1de00000)
-#define PHYS_DMAC_BLOCK		P4SEGADDR(0x1fa00000)
-#define PHYS_PBR_BLOCK		P4SEGADDR(0x1fc00000)
-
-static struct resource emi_resources[] = {
-	[0] = {
-		.start	= PHYS_EMI_CBLOCK,
-		.end	= PHYS_EMI_CBLOCK + 0x00300000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PHYS_EMI_DBLOCK,
-		.end	= PHYS_EMI_DBLOCK + 0x08000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct superhyway_device emi_device = {
-	.name		= "emi",
-	.num_resources	= ARRAY_SIZE(emi_resources),
-	.resource	= emi_resources,
-};
-
-static struct resource femi_resources[] = {
-	[0] = {
-		.start	= PHYS_FEMI_CBLOCK,
-		.end	= PHYS_FEMI_CBLOCK + 0x00100000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PHYS_FEMI_DBLOCK,
-		.end	= PHYS_FEMI_DBLOCK + 0x08000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct superhyway_device femi_device = {
-	.name		= "femi",
-	.num_resources	= ARRAY_SIZE(femi_resources),
-	.resource	= femi_resources,
-};
-
-static struct resource epbr_resources[] = {
-	[0] = {
-		.start	= P4SEGADDR(0x1e7ffff8),
-		.end	= P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PHYS_EPBR_BLOCK,
-		.end	= PHYS_EPBR_BLOCK + 0x00a00000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct superhyway_device epbr_device = {
-	.name		= "epbr",
-	.num_resources	= ARRAY_SIZE(epbr_resources),
-	.resource	= epbr_resources,
-};
-
-static struct resource dmac_resource = {
-	.start	= PHYS_DMAC_BLOCK,
-	.end	= PHYS_DMAC_BLOCK + 0x00100000 - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct superhyway_device dmac_device = {
-	.name		= "dmac",
-	.num_resources	= 1,
-	.resource	= &dmac_resource,
-};
-
-static struct resource pbr_resources[] = {
-	[0] = {
-		.start	= P4SEGADDR(0x1ffffff8),
-		.end	= P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PHYS_PBR_BLOCK,
-		.end	= PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct superhyway_device pbr_device = {
-	.name		= "pbr",
-	.num_resources	= ARRAY_SIZE(pbr_resources),
-	.resource	= pbr_resources,
-};
-
-static struct superhyway_device *sh4202_devices[] __initdata = {
-	&emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device,
-};
-
-static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
-{
-	u32 vcrh, vcrl;
-	u64 tmp;
-
-	/*
-	 * XXX: Even though the SH4-202 Evaluation Device documentation
-	 * indicates that VCRL is mapped first with VCRH at a + 0x04
-	 * offset, the opposite seems to be true.
-	 *
-	 * Some modules (PBR and ePBR for instance) also appear to have
-	 * VCRL/VCRH flipped in the documentation, but on the SH4-202
-	 * itself it appears that these are all consistently mapped with
-	 * VCRH preceding VCRL.
-	 *
-	 * Do not trust the documentation, for it is evil.
-	 */
-	vcrh = __raw_readl(base);
-	vcrl = __raw_readl(base + sizeof(u32));
-
-	tmp = ((u64)vcrh << 32) | vcrl;
-	memcpy(vcr, &tmp, sizeof(u64));
-
-	return 0;
-}
-
-static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
-{
-	u64 tmp = *(u64 *)&vcr;
-
-	__raw_writel((tmp >> 32) & 0xffffffff, base);
-	__raw_writel(tmp & 0xffffffff, base + sizeof(u32));
-
-	return 0;
-}
-
-static struct superhyway_ops sh4202_superhyway_ops = {
-	.read_vcr	= sh4202_read_vcr,
-	.write_vcr	= sh4202_write_vcr,
-};
-
-struct superhyway_bus superhyway_channels[] = {
-	{ &sh4202_superhyway_ops, },
-	{ 0, },
-};
-
-int __init superhyway_scan_bus(struct superhyway_bus *bus)
-{
-	return superhyway_add_devices(bus, sh4202_devices,
-				      ARRAY_SIZE(sh4202_devices));
-}
-
diff --git a/arch/sh/include/asm/cmpxchg.h b/arch/sh/include/asm/cmpxchg.h
index 288f6f38d98f..5d617b3ef78f 100644
--- a/arch/sh/include/asm/cmpxchg.h
+++ b/arch/sh/include/asm/cmpxchg.h
@@ -71,4 +71,13 @@ static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
 				    (unsigned long)_n_, sizeof(*(ptr))); \
   })
 
+#include <asm-generic/cmpxchg-local.h>
+
+#define arch_cmpxchg_local(ptr, o, n) ({				\
+	(__typeof__(*ptr))__generic_cmpxchg_local((ptr),		\
+						  (unsigned long)(o),	\
+						  (unsigned long)(n),	\
+						  sizeof(*(ptr)));	\
+})
+
 #endif /* __ASM_SH_CMPXCHG_H */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index f2f38e9d489a..ac521f287fa5 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -181,7 +181,7 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
 {									\
 	volatile type *__addr;						\
 									\
-	__addr = __ioport_map(port, sizeof(type));			\
+	__addr = (void __iomem *)sh_io_port_base + port;		\
 	*__addr = val;							\
 	slow;								\
 }									\
@@ -191,7 +191,7 @@ static inline type pfx##in##bwlq##p(unsigned long port)			\
 	volatile type *__addr;						\
 	type __val;							\
 									\
-	__addr = __ioport_map(port, sizeof(type));			\
+	__addr = (void __iomem *)sh_io_port_base + port;		\
 	__val = *__addr;						\
 	slow;								\
 									\
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index 2b4b085e8f21..4e5314b921f1 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -19,11 +19,6 @@ struct sh_machine_vector {
 	int (*mv_irq_demux)(int irq);
 	void (*mv_init_irq)(void);
 
-#ifdef CONFIG_HAS_IOPORT_MAP
-	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
-	void (*mv_ioport_unmap)(void __iomem *);
-#endif
-
 	int (*mv_clk_init)(void);
 	int (*mv_mode_pins)(void);
 
diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h
deleted file mode 100644
index 0e2f9ab11976..000000000000
--- a/arch/sh/include/mach-common/mach/microdev.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * linux/include/asm-sh/microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * Definitions for the SuperH SH4-202 MicroDev board.
- */
-#ifndef __ASM_SH_MICRODEV_H
-#define __ASM_SH_MICRODEV_H
-
-extern void init_microdev_irq(void);
-extern void microdev_print_fpga_intc_status(void);
-
-/*
- * The following are useful macros for manipulating the interrupt
- * controller (INTC) on the CPU-board FPGA.  should be noted that there
- * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
- * these are two different things, both of which need to be prorammed to
- * correctly route - unfortunately, they have the same name and
- * abbreviations!
- */
-#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interrupt mask to enable/disable INTC in CPU-board FPGA */
-#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
-#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
-
-
-/*
- * The following are the IRQ numbers for the Linux Kernel for external
- * interrupts.  i.e. the numbers seen by 'cat /proc/interrupt'.
- */
-#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
-#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
-#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
-#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
-#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
-#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
-#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
-#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
-
-/*
- * The following are the IRQ numbers for the INTC on the FPGA for
- * external interrupts.  i.e. the bits in the INTC registers in the
- * FPGA.
- */
-#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
-#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
-#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
-#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
-#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
-#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
-#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
-#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
-
-#define MICRODEV_IRQ_PCI_INTA		 8
-#define MICRODEV_IRQ_PCI_INTB		 9
-#define MICRODEV_IRQ_PCI_INTC		10
-#define MICRODEV_IRQ_PCI_INTD		11
-
-#define __IO_PREFIX microdev
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 00c16331e07e..02e3ee16e15c 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -23,15 +23,11 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7091)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7760)	+= setup-sh7760.o
-obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= setup-sh4-202.o
 
 # Primary on-chip clocks (common)
 ifndef CONFIG_CPU_SH4A
 clock-$(CONFIG_CPU_SH4)			:= clock-sh4.o
 endif
 
-# Additional clocks by subtype
-clock-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= clock-sh4-202.o
-
 obj-y					+= $(clock-y)
 obj-$(CONFIG_PERF_EVENTS)		+= $(perf-y)
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
deleted file mode 100644
index c1cdef763cb2..000000000000
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/sh4/clock-sh4-202.c
- *
- * Additional SH4-202 support for the clock framework
- *
- *  Copyright (C) 2005  Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-#define CPG2_FRQCR3	0xfe0a0018
-
-static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
-static int frqcr3_values[]   = { 0, 1, 2, 3, 4, 5, 6  };
-
-static unsigned long emi_clk_recalc(struct clk *clk)
-{
-	int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
-	return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
-{
-	int divisor = clk->parent->rate / rate;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++)
-		if (frqcr3_divisors[i] == divisor)
-			return frqcr3_values[i];
-
-	/* Safe fallback */
-	return 5;
-}
-
-static struct sh_clk_ops sh4202_emi_clk_ops = {
-	.recalc		= emi_clk_recalc,
-};
-
-static struct clk sh4202_emi_clk = {
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &sh4202_emi_clk_ops,
-};
-
-static unsigned long femi_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
-	return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static struct sh_clk_ops sh4202_femi_clk_ops = {
-	.recalc		= femi_clk_recalc,
-};
-
-static struct clk sh4202_femi_clk = {
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &sh4202_femi_clk_ops,
-};
-
-static void shoc_clk_init(struct clk *clk)
-{
-	int i;
-
-	/*
-	 * For some reason, the shoc_clk seems to be set to some really
-	 * insane value at boot (values outside of the allowable frequency
-	 * range for instance). We deal with this by scaling it back down
-	 * to something sensible just in case.
-	 *
-	 * Start scaling from the high end down until we find something
-	 * that passes rate verification..
-	 */
-	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
-		int divisor = frqcr3_divisors[i];
-
-		if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
-			break;
-	}
-
-	WARN_ON(i == ARRAY_SIZE(frqcr3_divisors));	/* Undefined clock */
-}
-
-static unsigned long shoc_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
-	return clk->parent->rate / frqcr3_divisors[idx];
-}
-
-static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
-{
-	struct clk *bclk = clk_get(NULL, "bus_clk");
-	unsigned long bclk_rate = clk_get_rate(bclk);
-
-	clk_put(bclk);
-
-	if (rate > bclk_rate)
-		return 1;
-	if (rate > 66000000)
-		return 1;
-
-	return 0;
-}
-
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long frqcr3;
-	unsigned int tmp;
-
-	/* Make sure we have something sensible to switch to */
-	if (shoc_clk_verify_rate(clk, rate) != 0)
-		return -EINVAL;
-
-	tmp = frqcr3_lookup(clk, rate);
-
-	frqcr3 = __raw_readl(CPG2_FRQCR3);
-	frqcr3 &= ~(0x0007 << 6);
-	frqcr3 |= tmp << 6;
-	__raw_writel(frqcr3, CPG2_FRQCR3);
-
-	clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
-
-	return 0;
-}
-
-static struct sh_clk_ops sh4202_shoc_clk_ops = {
-	.init		= shoc_clk_init,
-	.recalc		= shoc_clk_recalc,
-	.set_rate	= shoc_clk_set_rate,
-};
-
-static struct clk sh4202_shoc_clk = {
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &sh4202_shoc_clk_ops,
-};
-
-static struct clk *sh4202_onchip_clocks[] = {
-	&sh4202_emi_clk,
-	&sh4202_femi_clk,
-	&sh4202_shoc_clk,
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("emi_clk", &sh4202_emi_clk),
-	CLKDEV_CON_ID("femi_clk", &sh4202_femi_clk),
-	CLKDEV_CON_ID("shoc_clk", &sh4202_shoc_clk),
-};
-
-int __init arch_clk_init(void)
-{
-	struct clk *clk;
-	int i, ret = 0;
-
-	cpg_clk_init();
-
-	clk = clk_get(NULL, "master_clk");
-	for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
-		struct clk *clkp = sh4202_onchip_clocks[i];
-
-		clkp->parent = clk;
-		ret |= clk_register(clkp);
-	}
-
-	clk_put(clk);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	return ret;
-}
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
deleted file mode 100644
index e6737f3d0df2..000000000000
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SH4-202 Setup
- *
- *  Copyright (C) 2006  Paul Mundt
- *  Copyright (C) 2009  Magnus Damm
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/sh_intc.h>
-#include <linux/io.h>
-#include <asm/platform_early.h>
-
-static struct plat_sci_port scif0_platform_data = {
-	.scscr		= SCSCR_REIE,
-	.type		= PORT_SCIF,
-};
-
-static struct resource scif0_resources[] = {
-	DEFINE_RES_MEM(0xffe80000, 0x100),
-	DEFINE_RES_IRQ(evt2irq(0x700)),
-	DEFINE_RES_IRQ(evt2irq(0x720)),
-	DEFINE_RES_IRQ(evt2irq(0x760)),
-	DEFINE_RES_IRQ(evt2irq(0x740)),
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.resource	= scif0_resources,
-	.num_resources	= ARRAY_SIZE(scif0_resources),
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-static struct sh_timer_config tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource tmu0_resources[] = {
-	DEFINE_RES_MEM(0xffd80000, 0x30),
-	DEFINE_RES_IRQ(evt2irq(0x400)),
-	DEFINE_RES_IRQ(evt2irq(0x420)),
-	DEFINE_RES_IRQ(evt2irq(0x440)),
-};
-
-static struct platform_device tmu0_device = {
-	.name		= "sh-tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu0_platform_data,
-	},
-	.resource	= tmu0_resources,
-	.num_resources	= ARRAY_SIZE(tmu0_resources),
-};
-
-static struct platform_device *sh4202_devices[] __initdata = {
-	&scif0_device,
-	&tmu0_device,
-};
-
-static int __init sh4202_devices_setup(void)
-{
-	return platform_add_devices(sh4202_devices,
-				    ARRAY_SIZE(sh4202_devices));
-}
-arch_initcall(sh4202_devices_setup);
-
-static struct platform_device *sh4202_early_devices[] __initdata = {
-	&scif0_device,
-	&tmu0_device,
-};
-
-void __init plat_early_device_setup(void)
-{
-	sh_early_platform_add_devices(sh4202_early_devices,
-				   ARRAY_SIZE(sh4202_early_devices));
-}
-
-enum {
-	UNUSED = 0,
-
-	/* interrupt sources */
-	IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
-	HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT,
-};
-
-static struct intc_vect vectors[] __initdata = {
-	INTC_VECT(HUDI, 0x600),
-	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
-	INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
-	INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
-	INTC_VECT(RTC, 0x4c0),
-	INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
-	INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
-	INTC_VECT(WDT, 0x560),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
-	{ 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
-	{ 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } },
-	{ 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } },
-	{ 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL,
-			 NULL, prio_registers, NULL);
-
-static struct intc_vect vectors_irlm[] __initdata = {
-	INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
-	INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL,
-			 NULL, prio_registers, NULL);
-
-void __init plat_irq_setup(void)
-{
-	register_intc_controller(&intc_desc);
-}
-
-#define INTC_ICR	0xffd00000UL
-#define INTC_ICR_IRLM   (1<<7)
-
-void __init plat_irq_setup_pins(int mode)
-{
-	switch (mode) {
-	case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
-		__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
-		register_intc_controller(&intc_desc_irlm);
-		break;
-	default:
-		BUG();
-	}
-}
diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c
index f39446a658bd..c8aff8a20164 100644
--- a/arch/sh/kernel/ioport.c
+++ b/arch/sh/kernel/ioport.c
@@ -12,15 +12,6 @@
 unsigned long sh_io_port_base __read_mostly = -1;
 EXPORT_SYMBOL(sh_io_port_base);
 
-void __iomem *__ioport_map(unsigned long addr, unsigned int size)
-{
-	if (sh_mv.mv_ioport_map)
-		return sh_mv.mv_ioport_map(addr, size);
-
-	return (void __iomem *)(addr + sh_io_port_base);
-}
-EXPORT_SYMBOL(__ioport_map);
-
 void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
 	void __iomem *ret;
@@ -29,13 +20,11 @@ void __iomem *ioport_map(unsigned long port, unsigned int nr)
 	if (ret)
 		return ret;
 
-	return __ioport_map(port, nr);
+	return (void __iomem *)(port + sh_io_port_base);
 }
 EXPORT_SYMBOL(ioport_map);
 
 void ioport_unmap(void __iomem *addr)
 {
-	if (sh_mv.mv_ioport_unmap)
-		sh_mv.mv_ioport_unmap(addr);
 }
 EXPORT_SYMBOL(ioport_unmap);