x86: move suspend wakeup code to C

Move wakeup code to .c, so that video mode setting code can be shared
between boot and wakeup. Remove nasty assembly code in 64-bit case by
re-using trampoline code. Stack setup was fixed to clear high 16bits
of %esp, maybe that fixes some machines.

.c code sharing and morse code was done H. Peter Anvin, Sam Ravnborg
reviewed kbuild related stuff, and it seems okay to him. Rafael did
some cleanups.

[rjw:
* Made the patch stop breaking compilation on x86-32
* Added arch/x86/kernel/acpi/sleep.h
* Got rid of compiler warnings in arch/x86/kernel/acpi/sleep.c
* Fixed 32-bit compilation on x86-64 systems
* Added include/asm-x86/trampoline.h and fixed the non-SMP
  compilation on 64-bit x86
* Removed arch/x86/kernel/acpi/sleep_32.c which was not used
* Fixed some breakage caused by the integration of smpboot.c done
  under us in the meantime]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 20 insertions, 227 deletions

diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index f53e3277f8e5..a12e6a9fb659 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -3,178 +3,12 @@
 #include <asm/segment.h>
 #include <asm/page.h>
 
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls. 
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
-	inb	$97, %al; 	\
-	outb	%al, $0x80; 	\
-	movb	$3, %al; 	\
-	outb	%al, $97; 	\
-	outb	%al, $0x80; 	\
-	movb	$-74, %al; 	\
-	outb	%al, $67; 	\
-	outb	%al, $0x80; 	\
-	movb	$-119, %al; 	\
-	outb	%al, $66; 	\
-	outb	%al, $0x80; 	\
-	movb	$15, %al; 	\
-	outb	%al, $66;
-
-ALIGN
-	.align	4096
-ENTRY(wakeup_start)
-wakeup_code:
-	wakeup_code_start = .
-	.code16
-
-	cli
-	cld
-
-	# setup data segment
-	movw	%cs, %ax
-	movw	%ax, %ds					# Make ds:0 point to wakeup_start
-	movw	%ax, %ss
-
-	testl   $4, realmode_flags - wakeup_code
-	jz      1f
-	BEEP
-1:
-	mov	$(wakeup_stack - wakeup_code), %sp		# Private stack is needed for ASUS board
-
-	pushl	$0						# Kill any dangerous flags
-	popfl
-
-	movl	real_magic - wakeup_code, %eax
-	cmpl	$0x12345678, %eax
-	jne	bogus_real_magic
-
-	testl	$1, realmode_flags - wakeup_code
-	jz	1f
-	lcall   $0xc000,$3
-	movw	%cs, %ax
-	movw	%ax, %ds					# Bios might have played with that
-	movw	%ax, %ss
-1:
-
-	testl	$2, realmode_flags - wakeup_code
-	jz	1f
-	mov	video_mode - wakeup_code, %ax
-	call	mode_set
-1:
-
-	# set up page table
-	movl	$swsusp_pg_dir-__PAGE_OFFSET, %eax
-	movl	%eax, %cr3
-
-	testl	$1, real_efer_save_restore - wakeup_code
-	jz	4f
-	# restore efer setting
-	movl	real_save_efer_edx - wakeup_code, %edx
-	movl	real_save_efer_eax - wakeup_code, %eax
-	mov     $0xc0000080, %ecx
-	wrmsr
-4:
-	# make sure %cr4 is set correctly (features, etc)
-	movl	real_save_cr4 - wakeup_code, %eax
-	movl	%eax, %cr4
-	
-	# need a gdt -- use lgdtl to force 32-bit operands, in case
-	# the GDT is located past 16 megabytes.
-	lgdtl	real_save_gdt - wakeup_code
-
-	movl	real_save_cr0 - wakeup_code, %eax
-	movl	%eax, %cr0
-	jmp 1f
-1:
-	movl	real_magic - wakeup_code, %eax
-	cmpl	$0x12345678, %eax
-	jne	bogus_real_magic
-
-	testl   $8, realmode_flags - wakeup_code
-	jz      1f
-	BEEP
-1:
-	ljmpl	$__KERNEL_CS, $wakeup_pmode_return
-
-real_save_gdt:	.word 0
-		.long 0
-real_save_cr0:	.long 0
-real_save_cr3:	.long 0
-real_save_cr4:	.long 0
-real_magic:	.long 0
-video_mode:	.long 0
-realmode_flags:	.long 0
-real_efer_save_restore:	.long 0
-real_save_efer_edx: 	.long 0
-real_save_efer_eax: 	.long 0
-
-bogus_real_magic:
-	jmp bogus_real_magic
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- *	NORMAL_VGA (-1)
- *	EXTENDED_VGA (-2)
- *	ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff).  To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-mode_set:
-	movw	%ax, %bx
-	subb	$VIDEO_FIRST_VESA>>8, %bh
-	cmpb	$2, %bh
-	jb	check_vesa
-
-setbad:
-	clc
-	ret
-
-check_vesa:
-	orw	$0x4000, %bx			# Use linear frame buffer
-	movw	$0x4f02, %ax			# VESA BIOS mode set call
-	int	$0x10
-	cmpw	$0x004f, %ax			# AL=4f if implemented
-	jnz	setbad				# AH=0 if OK
-
-	stc
-	ret
+# Copyright 2003, 2008 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
 
 	.code32
 	ALIGN
 
-.org	0x800
-wakeup_stack_begin:	# Stack grows down
-
-.org	0xff0		# Just below end of page
-wakeup_stack:
-ENTRY(wakeup_end)
-	
-.org	0x1000
-
+ENTRY(wakeup_pmode_return)
 wakeup_pmode_return:
 	movw	$__KERNEL_DS, %ax
 	movw	%ax, %ss
@@ -187,7 +21,7 @@ wakeup_pmode_return:
 	lgdt	saved_gdt
 	lidt	saved_idt
 	lldt	saved_ldt
-	ljmp	$(__KERNEL_CS),$1f
+	ljmp	$(__KERNEL_CS), $1f
 1:
 	movl	%cr3, %eax
 	movl	%eax, %cr3
@@ -201,82 +35,41 @@ wakeup_pmode_return:
 	jne	bogus_magic
 
 	# jump to place where we left off
-	movl	saved_eip,%eax
+	movl	saved_eip, %eax
 	jmp	*%eax
 
 bogus_magic:
 	jmp	bogus_magic
 
 
-##
-# acpi_copy_wakeup_routine
-#
-# Copy the above routine to low memory.
-#
-# Parameters:
-# %eax:	place to copy wakeup routine to
-#
-# Returned address is location of code in low memory (past data and stack)
-#
-ENTRY(acpi_copy_wakeup_routine)
 
-	pushl	%ebx
+save_registers:
 	sgdt	saved_gdt
 	sidt	saved_idt
 	sldt	saved_ldt
 	str	saved_tss
 
-	movl	nx_enabled, %edx
-	movl	%edx, real_efer_save_restore - wakeup_start (%eax)
-	testl	$1, real_efer_save_restore - wakeup_start (%eax)
-	jz	2f
-	# save efer setting
-	pushl	%eax
-	movl	%eax, %ebx
-	mov     $0xc0000080, %ecx
-	rdmsr
-	movl	%edx, real_save_efer_edx - wakeup_start (%ebx)
-	movl	%eax, real_save_efer_eax - wakeup_start (%ebx)
-	popl	%eax
-2:
-
-	movl    %cr3, %edx
-	movl    %edx, real_save_cr3 - wakeup_start (%eax)
-	movl    %cr4, %edx
-	movl    %edx, real_save_cr4 - wakeup_start (%eax)
-	movl	%cr0, %edx
-	movl	%edx, real_save_cr0 - wakeup_start (%eax)
-	sgdt    real_save_gdt - wakeup_start (%eax)
-
-	movl	saved_videomode, %edx
-	movl	%edx, video_mode - wakeup_start (%eax)
-	movl	acpi_realmode_flags, %edx
-	movl	%edx, realmode_flags - wakeup_start (%eax)
-	movl	$0x12345678, real_magic - wakeup_start (%eax)
-	movl	$0x12345678, saved_magic
-	popl	%ebx
-	ret
-
-save_registers:
 	leal	4(%esp), %eax
 	movl	%eax, saved_context_esp
-	movl %ebx, saved_context_ebx
-	movl %ebp, saved_context_ebp
-	movl %esi, saved_context_esi
-	movl %edi, saved_context_edi
-	pushfl ; popl saved_context_eflags
-
-	movl $ret_point, saved_eip
+	movl	%ebx, saved_context_ebx
+	movl	%ebp, saved_context_ebp
+	movl	%esi, saved_context_esi
+	movl	%edi, saved_context_edi
+	pushfl
+	popl	saved_context_eflags
+
+	movl	$ret_point, saved_eip
 	ret
 
 
 restore_registers:
-	movl saved_context_ebp, %ebp
-	movl saved_context_ebx, %ebx
-	movl saved_context_esi, %esi
-	movl saved_context_edi, %edi
-	pushl saved_context_eflags ; popfl
-	ret	
+	movl	saved_context_ebp, %ebp
+	movl	saved_context_ebx, %ebx
+	movl	saved_context_esi, %esi
+	movl	saved_context_edi, %edi
+	pushl	saved_context_eflags
+	popfl
+	ret
 
 ENTRY(do_suspend_lowlevel)
 	call	save_processor_state