summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorArd Biesheuvel <ard.biesheuvel@linaro.org>2019-04-12 22:34:18 +0100
committerRussell King <rmk+kernel@armlinux.org.uk>2019-04-23 17:28:37 +0100
commite17b1af96b2afc38e684aa2f1033387e2ed10029 (patch)
tree023f28096fec46dd5fc1b6c9141e8f5ed6f02e20 /arch
parentc3143967807adb1357c36b68a7563fc0c4e1f615 (diff)
ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache
The EFI stub is entered with the caches and MMU enabled by the firmware, and once the stub is ready to hand over to the decompressor, we clean and disable the caches. The cache clean routines use CP15 barrier instructions, which can be disabled via SCTLR. Normally, when using the provided cache handling routines to enable the caches and MMU, this bit is enabled as well. However, but since we entered the stub with the caches already enabled, this routine is not executed before we call the cache clean routines, resulting in undefined instruction exceptions if the firmware never enabled this bit. So set the bit explicitly in the EFI entry code, but do so in a way that guarantees that the resulting code can still run on v6 cores as well (which are guaranteed to have CP15 barriers enabled) Cc: <stable@vger.kernel.org> # v4.9+ Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/compressed/head.S16
1 files changed, 15 insertions, 1 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 6c7ccb428c07..7135820f76d4 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1438,7 +1438,21 @@ ENTRY(efi_stub_entry)
@ Preserve return value of efi_entry() in r4
mov r4, r0
- bl cache_clean_flush
+
+ @ our cache maintenance code relies on CP15 barrier instructions
+ @ but since we arrived here with the MMU and caches configured
+ @ by UEFI, we must check that the CP15BEN bit is set in SCTLR.
+ @ Note that this bit is RAO/WI on v6 and earlier, so the ISB in
+ @ the enable path will be executed on v7+ only.
+ mrc p15, 0, r1, c1, c0, 0 @ read SCTLR
+ tst r1, #(1 << 5) @ CP15BEN bit set?
+ bne 0f
+ orr r1, r1, #(1 << 5) @ CP15 barrier instructions
+ mcr p15, 0, r1, c1, c0, 0 @ write SCTLR
+ ARM( .inst 0xf57ff06f @ v7+ isb )
+ THUMB( isb )
+
+0: bl cache_clean_flush
bl cache_off
@ Set parameters for booting zImage according to boot protocol